From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 2931AC433EF for ; Wed, 19 Jan 2022 13:06:52 +0000 (UTC) Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id E72CC31C1; Wed, 19 Jan 2022 14:05:59 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz E72CC31C1 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1642597610; bh=Ry0dpqewIweZCuLZMxp1PB4CVhCGlNpeBlgvI276yds=; h=Date:From:To:Subject:References:In-Reply-To:Cc:List-Id: List-Unsubscribe:List-Archive:List-Post:List-Help:List-Subscribe: From; b=Qkq1Tx25v0xX4NT4UEh/cotfmEUCrybt1aID8dxN1TTdHm18fp0IdkyEaA3qcfOH/ R1gmHeFOYtMy6yJ92ieoaKYgAM3M33/RKD1IkSWyC126a+eHvQXBfp86HKGqPp44uN EuxJ8KG0nY1cFhVqVFplEF7nHhxwYEiduwHUSzvc= Received: from alsa1.perex.cz (localhost.localdomain [127.0.0.1]) by alsa1.perex.cz (Postfix) with ESMTP id 821A4F800F8; Wed, 19 Jan 2022 14:05:59 +0100 (CET) Received: by alsa1.perex.cz (Postfix, from userid 50401) id 0BD8DF801F7; Wed, 19 Jan 2022 14:05:58 +0100 (CET) Received: from mail-ed1-x533.google.com (mail-ed1-x533.google.com [IPv6:2a00:1450:4864:20::533]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 037F0F80100 for ; Wed, 19 Jan 2022 14:05:51 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz 037F0F80100 Authentication-Results: alsa1.perex.cz; dkim=pass (2048-bit key) header.d=hifiberry-com.20210112.gappssmtp.com header.i=@hifiberry-com.20210112.gappssmtp.com header.b="Tc4B9bZj" Received: by mail-ed1-x533.google.com with SMTP id c24so8524430edy.4 for ; Wed, 19 Jan 2022 05:05:51 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=hifiberry-com.20210112.gappssmtp.com; s=20210112; h=date:from:to:cc:subject:message-id:references:mime-version :content-disposition:in-reply-to; bh=BQZ4E8a4HAhSeMxSv0ESD+f/G1GPsUEbYE76r90MaCk=; b=Tc4B9bZjirTDWHYZqFdZMI7p6G4hEW2+ofLP/UXWggdgB2gHn5xMqr2T+TolsPgtAB e+LaH7oj3Xeh2C3KY4lNEcGt3LtDlGyH8i4OASPvWaiItwc9dKyzILPY0GkEmK0mv54b 6J05rMijKugqWK1NRohHI78xljxfIv0CFx0n1+D5WdqTsiaeXSdZq6dGSjZbWMHO0d7P fZ/w6V5gEP+CjB80yUSNg6xOxM9yddKQpOsZMtsjrEURLXSKjEK2xzVzkuug3xioqYf/ Y7qEiyOLEIY525QpRf69WnuW2u5oL6w41K3ibF++oMEVAOJpBitBvxr1N+yCLqCSNK/2 wurQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=BQZ4E8a4HAhSeMxSv0ESD+f/G1GPsUEbYE76r90MaCk=; b=dZdCNAmYnfZXfjZkvd8wjNJ6UBQqFUlfq+QrLcKRNCuO6EFn9HviHQq9FBK/nntKmM czWugMekVfxBpoVKyKpeddGmaAyjf8b1vIhPxje0Q1T9E0A/8ivF7+J8pvVmh2p0h6LC HQnPuMSjVPNz10l3Ut4ZFv/YE9OnKcKO9sdOT70NALf0BA7et9Uhb2K1s4Ad9rbSDZZq 891YEBlv7nXvsO1JI4KiWz5t5ivnKieKZ8R8SUoxgkk+KeYssgJ67u9wgbK/a0/d2YXP 2yhD39xVEYvIQNylJXpLscaL9j2epSaGHHaQLwy/iznS7aCJjoJr9HWBWloVhj0uw1D9 UPaA== X-Gm-Message-State: AOAM532QG1IIEjRtJbTIkbWUIkcO0V2Y9I7IMLIMoyAcP0eXELUfs7bz tRajoEsJpGCGPy305D8U42kE8Q== X-Google-Smtp-Source: ABdhPJwn/YKb+HGgtSjYOB5C7FdudQvwNOND6u9GE0Fnmaim3rItPf2nQ2rzD8buC3MX4IznP4XNgA== X-Received: by 2002:a5d:6e83:: with SMTP id k3mr2297641wrz.506.1642597548917; Wed, 19 Jan 2022 05:05:48 -0800 (PST) Received: from ubuntu ([2a02:810d:1640:10d8:5d27:648f:a5b9:b18a]) by smtp.gmail.com with ESMTPSA id a8sm19026313wrx.57.2022.01.19.05.05.48 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 19 Jan 2022 05:05:48 -0800 (PST) Date: Wed, 19 Jan 2022 14:05:46 +0100 From: Joerg Schambacher To: Cezary Rojewski , alsa-devel@alsa-project.org, Mark Brown Subject: Re: [PATCH v4] ASoC: adds component driver for TAS575xM digital amplifiers Message-ID: <20220119130546.GB2144@ubuntu> References: <20211029095414.29131-1-joerg@hifiberry.com> <20220110084554.2228-1-joerg@hifiberry.com> <8f62aa37-c2a6-1a74-6e6f-5208b10b96ec@intel.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <8f62aa37-c2a6-1a74-6e6f-5208b10b96ec@intel.com> Cc: joerg@hifiberry.com, kbuild-all@lists.01.org X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: "Alsa-devel" Cezary, Thanks for your review and the feedback. I hope I've fixed all issues. Joerg On Mon, Jan 10, 2022 at 05:25:14PM +0100, Cezary Rojewski wrote: > On 2022-01-10 9:45 AM, Joerg Schambacher wrote: > > Adds a minimum component driver to run the amplifier in I2S master > > mode only from standard audio clocks. Therefore, it only allows > > 44.1, 88.2, 176.4, 48, 96 and 192ksps with 16, 20, 24 and 32 bits > > sample size. Digital volume control and the -6dB and +0.8dB switches > > are supported. > > Couple nitpicks and suggestions below. > > (...) > > > +static int tas5754m_set_bias_level(struct snd_soc_component *component, > > + enum snd_soc_bias_level level) > > +{ > > + struct tas5754m_priv *tas5754m = > > + snd_soc_component_get_drvdata(component); > > + int ret; > > + > > + switch (level) { > > + case SND_SOC_BIAS_ON: > > + case SND_SOC_BIAS_PREPARE: > > + break; > > + > > + case SND_SOC_BIAS_STANDBY: > > + ret = regmap_update_bits(tas5754m->regmap, > > + TAS5754M_POWER, TAS5754M_RQST, 0); > > + if (ret != 0) { > > I believe we are dealing here with standard API function i.e. 0 on success > and negative value on error. And thus, 'if (ret)' suffices. > yes, fixed > > + dev_err(component->dev, > > + "Failed to remove standby: %d\n", ret); > > + return ret; > > + } > > + break; > > + > > + case SND_SOC_BIAS_OFF: > > + ret = regmap_update_bits(tas5754m->regmap, > > + TAS5754M_POWER, TAS5754M_RQST, TAS5754M_RQST); > > + if (ret != 0) { > > Ditto. This also goes for every single usage of regmap_xxx() in this file. > > > + dev_err(component->dev, > > + "Failed to request standby: %d\n", ret); > > + return ret; > > + } > > + break; > > + } > > + > > + return 0; > > You could also drop the 'return ret' from the if-statements above - granting > you also ability to drop the brackets - and instead return 'ret' instead of > '0' here. Of course that means 'ret' needs to be initialized appropriately > at the top of the function. yes, fixed as recommended > > > +} > > + > > +int tas5754m_set_clock_tree_master(struct snd_soc_dai *dai, > > + struct snd_pcm_hw_params *params) > > Indentation seems off. aligned all functions/parameters > > > +{ > > + struct snd_soc_component *component = dai->component; > > + struct tas5754m_priv *tas5754m = > > + snd_soc_component_get_drvdata(component); > > + static const struct reg_sequence pll_settings[] = { > > + { TAS5754M_PLL_COEFF_P, 0x01 }, // P=2 > > + { TAS5754M_PLL_COEFF_J, 0x08 }, // J=8 > > + { TAS5754M_PLL_COEFF_DL, 0x00 }, // D12-8 = 0 > > + { TAS5754M_PLL_COEFF_DH, 0x00 }, // D7-0 = 0 > > + { TAS5754M_PLL_COEFF_R, 0x00 }, // R=1 > > + }; > > + int ret; > > + > > + /* disable PLL before any clock tree change */ > > + ret = regmap_update_bits(tas5754m->regmap, TAS5754M_PLL_EN, > > + TAS5754M_PLLE, 0); > > + if (ret != 0) { > > + dev_err(component->dev, "Failed to disable PLL: %d\n", ret); > > + return ret; > > + } > > + > > + /* set DAC clock source to MCLK */ > > + ret = regmap_write(tas5754m->regmap, TAS5754M_DAC_REF, 0x30); > > + if (ret != 0) { > > + dev_err(component->dev, "Failed to set DAC ref\n"); > > + return ret; > > + } > > + > > + /* run PLL at fixed ratio to MCLK */ > > + ret = regmap_multi_reg_write(tas5754m->regmap, pll_settings, > > + ARRAY_SIZE(pll_settings)); > > + if (ret != 0) { > > + dev_err(component->dev, "Failed to set PLL ratio\n"); > > + return ret; > > + } > > + > > + /* set DSP divider to 2 => reg 0x01 */ > > + ret = regmap_write(tas5754m->regmap, TAS5754M_DSP_CLKDIV, 1); > > + if (ret != 0) { > > + dev_err(component->dev, "Failed to set DSP divider\n"); > > + return ret; > > + } > > + /* set DAC divider to 4 => reg 0x03*/ > > + ret = regmap_write(tas5754m->regmap, TAS5754M_DAC_CLKDIV, 3); > > + if (ret != 0) { > > + dev_err(component->dev, "Failed to set OSDACR divider\n"); > > + return ret; > > + } > > + /* set OSR divider to 1 */ > > + ret = regmap_write(tas5754m->regmap, TAS5754M_OSR_CLKDIV, 0); > > + if (ret != 0) { > > + dev_err(component->dev, "Failed to set OSR divider\n"); > > + return ret; > > + } > > + /* set CP divider to 4 => reg 0x03*/ > > + ret = regmap_write(tas5754m->regmap, TAS5754M_NCP_CLKDIV, 3); > > + if (ret != 0) { > > + dev_err(component->dev, "Failed to set CP divider\n"); > > + return ret; > > + } > > + /* finally enable PLL */ > > + ret = regmap_update_bits(tas5754m->regmap, TAS5754M_PLL_EN, > > + TAS5754M_PLLE, 1); > > + if (ret != 0) { > > + dev_err(component->dev, "Failed to enable PLL: %d\n", ret); > > + return ret; > > + } > > + > > + return 0; > > +} > > I'd suggest to keep the logical block organization cohesive. Especially if > there are several of them all located within a single function. Some of the > do/check/error-out blocks above are separated by a newline from the > following ones, and some are not. > > Another point is the cohesiveness of the error-message format. Some of the > above print value of 'ret' i.e. carry additional value whereas other skip > that part. Is this intentional? done following your suggestions > > > + > > +int tas5754m_set_dai_mode(struct snd_soc_dai *dai) > > +{ > > + struct snd_soc_component *component = dai->component; > > + struct tas5754m_priv *tas5754m = > > + snd_soc_component_get_drvdata(component); > > + int fmt = tas5754m->fmt; > > + > > + /* only I2S MASTER mode implemented */ > > + if (((fmt & SND_SOC_DAIFMT_FORMAT_MASK) != SND_SOC_DAIFMT_I2S)) { > > Maybe I'm missing something but the most outter pair of brackets is > redundant. Removed the brackets - I once had a warning like 'brackets around boolean expression' - but it works correct now. > > > + dev_err(component->dev, > > + "DAI format not supported (I2S master only)\n"); > > + return -EINVAL; > > + } > > + /* TAS5754/6m do not support inverted clocks in MASTER mode */ > > A newline before the comment would make this more readabile - that's a new > logical block afterall. fixed > > > + if (((fmt & SND_SOC_DAIFMT_CLOCK_MASK) != SND_SOC_DAIFMT_NB_NF)) { > > Again, I may be missing something, but this looks like outter brackets are > redundant. > > > + dev_err(component->dev, "Inverted clocks not supported\n"); > > + return -EINVAL; > > + } > > + > > + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { > > + case SND_SOC_DAIFMT_CBM_CFM: > > + regmap_update_bits(tas5754m->regmap, > > + TAS5754M_BCLK_LRCLK_CFG, > > + TAS5754M_LRKO | TAS5754M_BCKO, > > + TAS5754M_LRKO | TAS5754M_BCKO); > > + /* reset CLK dividers */ > > + regmap_update_bits(tas5754m->regmap, > > + TAS5754M_MASTER_MODE, > > + 0x00, > > + TAS5754M_RLRK | TAS5754M_RBCK); > > + /* ignore all clock error detection but MCLK */ > > + regmap_update_bits(tas5754m->regmap, > > + TAS5754M_ERROR_DETECT, > > + TAS5754M_IPLK | TAS5754M_DCAS | > > + TAS5754M_IDCM | TAS5754M_IDSK | > > + TAS5754M_IDBK | TAS5754M_IDFS, > > + TAS5754M_IPLK | TAS5754M_DCAS | > > + TAS5754M_IDCM | TAS5754M_IDSK | > > + TAS5754M_IDBK | TAS5754M_IDFS); > > + break; > > + case SND_SOC_DAIFMT_CBS_CFS: > > + case SND_SOC_DAIFMT_CBM_CFS: > > + default: > > + return -EINVAL; > > + } > > + > > + return 0; > > +} > > + > > +int tas5754m_set_dividers_master(struct snd_soc_dai *dai, > > + struct snd_pcm_hw_params *params) > > +{ > > + struct snd_soc_component *component = dai->component; > > + struct tas5754m_priv *tas5754m = > > + snd_soc_component_get_drvdata(component); > > + unsigned long bclk; > > + unsigned long mclk; > > + int bclk_div; > > + int lrclk_div; > > + int osr; > > + int ret; > > + > > + mclk = clk_get_rate(tas5754m->sclk); > > + bclk = tas5754m->sample_len * 2 * params_rate(params); > > + bclk_div = mclk / bclk; > > + lrclk_div = tas5754m->sample_len * 2; > > + osr = mclk / 4 / params_rate(params) / 16; > > Is there a specific reason as to why these magic numbers aren't > defines/constants? mclk and sample_len vary: can be 22.5792/24.576MHz and 16/32 bits > > > + > > + // stop LR / SCLK clocks > > Formatting of this comment looks odd. Please align with the recommended one. > > > (...) > > > Regards, > Czarek >From 06172ee3aff67edb09c934d96740ced85a70e8f6 Mon Sep 17 00:00:00 2001 From: Joerg Schambacher Date: Tue, 5 Oct 2021 14:38:21 +0200 Subject: [PATCH] ASoC: adds component driver for TAS575xM digital amplifiers Adds a minimum component driver to run the amplifier in I2S master mode only from standard audio clocks. Therefore, it only allows 44.1, 88.2, 176.4, 48, 96 and 192ksps with 16, 20, 24 and 32 bits sample size. Digital volume control and the -6dB and +0.8dB switches are supported. Signed-off-by: Joerg Schambacher --- sound/soc/codecs/Kconfig | 8 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas5754m.c | 691 ++++++++++++++++++++++++++++++++++++ sound/soc/codecs/tas5754m.h | 260 ++++++++++++++ 4 files changed, 961 insertions(+) create mode 100644 sound/soc/codecs/tas5754m.c create mode 100644 sound/soc/codecs/tas5754m.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 82ee233a269d..cf0584948fcf 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -210,6 +210,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_TAS5086 imply SND_SOC_TAS571X imply SND_SOC_TAS5720 + imply SND_SOC_TAS5754M imply SND_SOC_TAS6424 imply SND_SOC_TDA7419 imply SND_SOC_TFA9879 @@ -1419,6 +1420,13 @@ config SND_SOC_TAS5720 Enable support for Texas Instruments TAS5720L/M high-efficiency mono Class-D audio power amplifiers. +config SND_SOC_TAS5754M + tristate "Texas Instruments TAS5754M Digital Input Audio amplifier" + depends on I2C + help + Enable support for Texas Instruments TAS5754M digital input + Class-D audio power amplifiers. + config SND_SOC_TAS6424 tristate "Texas Instruments TAS6424 Quad-Channel Audio amplifier" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 8dcea2c4604a..39984900258a 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -227,6 +227,7 @@ snd-soc-sti-sas-objs := sti-sas.o snd-soc-tas5086-objs := tas5086.o snd-soc-tas571x-objs := tas571x.o snd-soc-tas5720-objs := tas5720.o +snd-soc-tas5754m-objs := tas5754m.o snd-soc-tas6424-objs := tas6424.o snd-soc-tda7419-objs := tda7419.o snd-soc-tas2770-objs := tas2770.o @@ -555,6 +556,7 @@ obj-$(CONFIG_SND_SOC_TAS2764) += snd-soc-tas2764.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o +obj-$(CONFIG_SND_SOC_TAS5754M) += snd-soc-tas5754m.o obj-$(CONFIG_SND_SOC_TAS6424) += snd-soc-tas6424.o obj-$(CONFIG_SND_SOC_TDA7419) += snd-soc-tda7419.o obj-$(CONFIG_SND_SOC_TAS2770) += snd-soc-tas2770.o diff --git a/sound/soc/codecs/tas5754m.c b/sound/soc/codecs/tas5754m.c new file mode 100644 index 000000000000..5aec0c1c6aeb --- /dev/null +++ b/sound/soc/codecs/tas5754m.c @@ -0,0 +1,691 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for the TAS5754M Audio Amplifier + * + * Author: Joerg Schambacher + * with fragments from Andy Liu + * + * The driver supports I2S master mode only with standard audio + * frequencies 44.1 to 192 ksps from a 24.576/22.2592MHz master + * clock input + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "tas5754m.h" + +#define TAS5754M_RATES (SNDRV_PCM_RATE_48000 | \ + SNDRV_PCM_RATE_96000 | \ + SNDRV_PCM_RATE_192000 | \ + SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_88200 | \ + SNDRV_PCM_RATE_176400) +#define TAS5754M_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S20_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + + +static const struct reg_default tas5754m_reg_defaults[] = { + { TAS5754M_RESET, 0x00 }, + { TAS5754M_POWER, 0x00 }, + { TAS5754M_MUTE, 0x00 }, + { TAS5754M_DSP, 0x00 }, + { TAS5754M_PLL_REF, 0x00 }, + { TAS5754M_DAC_REF, 0x00 }, + { TAS5754M_DAC_ROUTING, 0x11 }, + { TAS5754M_DSP_PROGRAM, 0x01 }, + { TAS5754M_CLKDET, 0x00 }, + { TAS5754M_AUTO_MUTE, 0x00 }, + { TAS5754M_ERROR_DETECT, 0x00 }, + { TAS5754M_DIGITAL_VOLUME_1, 0x00 }, + { TAS5754M_DIGITAL_VOLUME_2, 0x30 }, + { TAS5754M_DIGITAL_VOLUME_3, 0x30 }, + { TAS5754M_DIGITAL_MUTE_1, 0x22 }, + { TAS5754M_DIGITAL_MUTE_2, 0x00 }, + { TAS5754M_DIGITAL_MUTE_3, 0x07 }, + { TAS5754M_OUTPUT_AMPLITUDE, 0x00 }, + { TAS5754M_ANALOG_GAIN_CTRL, 0x00 }, + { TAS5754M_UNDERVOLTAGE_PROT, 0x00 }, + { TAS5754M_ANALOG_MUTE_CTRL, 0x00 }, + { TAS5754M_ANALOG_GAIN_BOOST, 0x00 }, + { TAS5754M_VCOM_CTRL_1, 0x00 }, + { TAS5754M_VCOM_CTRL_2, 0x01 }, + { TAS5754M_BCLK_LRCLK_CFG, 0x00 }, + { TAS5754M_MASTER_MODE, 0x7c }, + { TAS5754M_GPIO_PLLIN, 0x00 }, + { TAS5754M_SYNCHRONIZE, 0x10 }, + { TAS5754M_PLL_COEFF_P, 0x00 }, + { TAS5754M_PLL_COEFF_J, 0x00 }, + { TAS5754M_PLL_COEFF_DH, 0x00 }, + { TAS5754M_PLL_COEFF_DL, 0x00 }, + { TAS5754M_PLL_COEFF_R, 0x00 }, + { TAS5754M_DSP_CLKDIV, 0x00 }, + { TAS5754M_DAC_CLKDIV, 0x00 }, + { TAS5754M_NCP_CLKDIV, 0x00 }, + { TAS5754M_OSR_CLKDIV, 0x00 }, + { TAS5754M_MASTER_SCLKDIV, 0x00 }, + { TAS5754M_MASTER_LRCLKDIV, 0x00 }, + { TAS5754M_FS_SPEED_MODE, 0x00 }, + { TAS5754M_IDAC_1, 0x01 }, + { TAS5754M_IDAC_2, 0x00 }, +}; + +static bool tas5754m_readable(struct device *dev, unsigned int reg) +{ + switch (reg) { + case TAS5754M_RESET: + case TAS5754M_POWER: + case TAS5754M_MUTE: + case TAS5754M_PLL_EN: + case TAS5754M_DSP: + case TAS5754M_GPIO_EN: + case TAS5754M_BCLK_LRCLK_CFG: + case TAS5754M_DSP_GPIO_INPUT: + case TAS5754M_MASTER_MODE: + case TAS5754M_PLL_REF: + case TAS5754M_DAC_REF: + case TAS5754M_GPIO_PLLIN: + case TAS5754M_SYNCHRONIZE: + case TAS5754M_PLL_COEFF_P: + case TAS5754M_PLL_COEFF_J: + case TAS5754M_PLL_COEFF_DH: + case TAS5754M_PLL_COEFF_DL: + case TAS5754M_PLL_COEFF_R: + case TAS5754M_DSP_CLKDIV: + case TAS5754M_DAC_CLKDIV: + case TAS5754M_NCP_CLKDIV: + case TAS5754M_OSR_CLKDIV: + case TAS5754M_MASTER_SCLKDIV: + case TAS5754M_MASTER_LRCLKDIV: + case TAS5754M_FS_SPEED_MODE: + case TAS5754M_IDAC_1: + case TAS5754M_IDAC_2: + case TAS5754M_ERROR_DETECT: + case TAS5754M_I2S_1: + case TAS5754M_I2S_2: + case TAS5754M_DAC_ROUTING: + case TAS5754M_DSP_PROGRAM: + case TAS5754M_CLKDET: + case TAS5754M_AUTO_MUTE: + case TAS5754M_DIGITAL_VOLUME_1: + case TAS5754M_DIGITAL_VOLUME_2: + case TAS5754M_DIGITAL_VOLUME_3: + case TAS5754M_DIGITAL_MUTE_1: + case TAS5754M_DIGITAL_MUTE_2: + case TAS5754M_DIGITAL_MUTE_3: + case TAS5754M_GPIO_OUTPUT_0: + case TAS5754M_GPIO_OUTPUT_1: + case TAS5754M_GPIO_OUTPUT_2: + case TAS5754M_GPIO_CONTROL_1: + case TAS5754M_GPIO_CONTROL_2: + case TAS5754M_OVERFLOW: + case TAS5754M_RATE_DET_1: + case TAS5754M_RATE_DET_2: + case TAS5754M_RATE_DET_3: + case TAS5754M_RATE_DET_4: + case TAS5754M_CLOCK_STATUS: + case TAS5754M_ANALOG_MUTE_DET: + case TAS5754M_GPIN: + case TAS5754M_DIGITAL_MUTE_DET: + case TAS5754M_OUTPUT_AMPLITUDE: + case TAS5754M_ANALOG_GAIN_CTRL: + case TAS5754M_UNDERVOLTAGE_PROT: + case TAS5754M_ANALOG_MUTE_CTRL: + case TAS5754M_ANALOG_GAIN_BOOST: + case TAS5754M_VCOM_CTRL_1: + case TAS5754M_VCOM_CTRL_2: + case TAS5754M_CRAM_CTRL: + case TAS5754M_FLEX_A: + case TAS5754M_FLEX_B: + return true; + default: + return reg < 0x7f; + } +} + +static bool tas5754m_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case TAS5754M_PLL_EN: + case TAS5754M_OVERFLOW: + case TAS5754M_RATE_DET_1: + case TAS5754M_RATE_DET_2: + case TAS5754M_RATE_DET_3: + case TAS5754M_RATE_DET_4: + case TAS5754M_CLOCK_STATUS: + case TAS5754M_ANALOG_MUTE_DET: + case TAS5754M_GPIN: + case TAS5754M_DIGITAL_MUTE_DET: + case TAS5754M_CRAM_CTRL: + return true; + default: + return reg < 0x7f; + } +} + +struct tas5754m_priv { + struct regmap *regmap; + struct clk *sclk; + int sample_len; + int fmt; + int mode; +}; + +static const struct regmap_range_cfg tas5754m_range = { + .name = "Pages", + .range_min = TAS5754M_VIRT_BASE, + .range_max = TAS5754M_MAX_REGISTER, + .selector_reg = TAS5754M_PAGE, + .selector_mask = 0x7f, + .window_start = 0, + .window_len = 128, +}; + +const struct regmap_config tas5754m_regmap = { + .reg_bits = 8, + .val_bits = 8, + + .ranges = &tas5754m_range, + .num_ranges = 1, + .max_register = TAS5754M_MAX_REGISTER, + + .reg_defaults = tas5754m_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(tas5754m_reg_defaults), + .readable_reg = tas5754m_readable, + .volatile_reg = tas5754m_volatile, + + .cache_type = REGCACHE_RBTREE, +}; + +static const DECLARE_TLV_DB_SCALE(digital_tlv, -10350, 50, 1); +static const DECLARE_TLV_DB_SCALE(analog_tlv, -600, 600, 0); +static const DECLARE_TLV_DB_SCALE(boost_tlv, 0, 80, 0); + +static const struct snd_kcontrol_new tas5754m_controls[] = { +SOC_DOUBLE_R_TLV("Digital Playback Volume", TAS5754M_DIGITAL_VOLUME_2, + TAS5754M_DIGITAL_VOLUME_3, 0, 255, 1, digital_tlv), +SOC_DOUBLE_TLV("Analog Playback Volume", TAS5754M_ANALOG_GAIN_CTRL, + TAS5754M_LAGN_SHIFT, TAS5754M_RAGN_SHIFT, 1, 1, analog_tlv), +SOC_DOUBLE_TLV("Analogue Playback Boost Volume", TAS5754M_ANALOG_GAIN_BOOST, + TAS5754M_AGBL_SHIFT, TAS5754M_AGBR_SHIFT, 1, 0, boost_tlv), +}; + +static int tas5754m_set_bias_level(struct snd_soc_component *component, + enum snd_soc_bias_level level) +{ + struct tas5754m_priv *tas5754m = + snd_soc_component_get_drvdata(component); + int ret; + + switch (level) { + default: + case SND_SOC_BIAS_ON: + case SND_SOC_BIAS_PREPARE: + break; + + case SND_SOC_BIAS_STANDBY: + ret = regmap_update_bits(tas5754m->regmap, + TAS5754M_POWER, TAS5754M_RQST, 0); + if (ret) + dev_err(component->dev, + "Failed to remove standby: %d\n", ret); + break; + + case SND_SOC_BIAS_OFF: + ret = regmap_update_bits(tas5754m->regmap, + TAS5754M_POWER, TAS5754M_RQST, TAS5754M_RQST); + if (ret) + dev_err(component->dev, + "Failed to request standby: %d\n", ret); + break; + } + + return ret; +} + +static int tas5754m_set_clock_tree_master(struct snd_soc_dai *dai, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_component *component = dai->component; + struct tas5754m_priv *tas5754m = + snd_soc_component_get_drvdata(component); + static const struct reg_sequence pll_settings[] = { + { TAS5754M_PLL_COEFF_P, 0x01 }, // P=2 + { TAS5754M_PLL_COEFF_J, 0x08 }, // J=8 + { TAS5754M_PLL_COEFF_DL, 0x00 }, // D12-8 = 0 + { TAS5754M_PLL_COEFF_DH, 0x00 }, // D7-0 = 0 + { TAS5754M_PLL_COEFF_R, 0x00 }, // R=1 + }; + int ret; + + /* disable PLL before any clock tree change */ + ret = regmap_update_bits(tas5754m->regmap, TAS5754M_PLL_EN, + TAS5754M_PLLE, 0); + if (ret) { + dev_err(component->dev, "Failed to disable PLL\n"); + return ret; + } + /* set DAC clock source to MCLK */ + ret = regmap_write(tas5754m->regmap, TAS5754M_DAC_REF, 0x30); + if (ret) { + dev_err(component->dev, "Failed to set DAC ref\n"); + return ret; + } + /* run PLL at fixed ratio to MCLK */ + ret = regmap_multi_reg_write(tas5754m->regmap, pll_settings, + ARRAY_SIZE(pll_settings)); + if (ret) { + dev_err(component->dev, "Failed to set PLL ratio\n"); + return ret; + } + /* set DSP divider to 2 => reg 0x01 */ + ret = regmap_write(tas5754m->regmap, TAS5754M_DSP_CLKDIV, 1); + if (ret) { + dev_err(component->dev, "Failed to set DSP divider\n"); + return ret; + } + /* set DAC divider to 4 => reg 0x03*/ + ret = regmap_write(tas5754m->regmap, TAS5754M_DAC_CLKDIV, 3); + if (ret) { + dev_err(component->dev, "Failed to set OSDACR divider\n"); + return ret; + } + /* set OSR divider to 1 */ + ret = regmap_write(tas5754m->regmap, TAS5754M_OSR_CLKDIV, 0); + if (ret) { + dev_err(component->dev, "Failed to set OSR divider\n"); + return ret; + } + /* set CP divider to 4 => reg 0x03*/ + ret = regmap_write(tas5754m->regmap, TAS5754M_NCP_CLKDIV, 3); + if (ret) { + dev_err(component->dev, "Failed to set CP divider\n"); + return ret; + } + /* finally enable PLL */ + ret = regmap_update_bits(tas5754m->regmap, TAS5754M_PLL_EN, + TAS5754M_PLLE, 1); + if (ret) { + dev_err(component->dev, "Failed to enable PLL\n"); + return ret; + } + + return 0; +} + +static int tas5754m_set_dai_mode(struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct tas5754m_priv *tas5754m = + snd_soc_component_get_drvdata(component); + int fmt = tas5754m->fmt; + + /* only I2S MASTER mode implemented */ + if ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) != SND_SOC_DAIFMT_I2S) { + dev_err(component->dev, + "DAI format not supported (I2S master only)\n"); + return -EINVAL; + } + + /* TAS5754/6m do not support inverted clocks in MASTER mode */ + if ((fmt & SND_SOC_DAIFMT_CLOCK_MASK) != SND_SOC_DAIFMT_NB_NF) { + dev_err(component->dev, "Inverted clocks not supported\n"); + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + regmap_update_bits(tas5754m->regmap, + TAS5754M_BCLK_LRCLK_CFG, + TAS5754M_LRKO | TAS5754M_BCKO, + TAS5754M_LRKO | TAS5754M_BCKO); + /* reset CLK dividers */ + regmap_update_bits(tas5754m->regmap, + TAS5754M_MASTER_MODE, + 0x00, + TAS5754M_RLRK | TAS5754M_RBCK); + /* ignore all clock error detection but MCLK */ + regmap_update_bits(tas5754m->regmap, + TAS5754M_ERROR_DETECT, + TAS5754M_IPLK | TAS5754M_DCAS | + TAS5754M_IDCM | TAS5754M_IDSK | + TAS5754M_IDBK | TAS5754M_IDFS, + TAS5754M_IPLK | TAS5754M_DCAS | + TAS5754M_IDCM | TAS5754M_IDSK | + TAS5754M_IDBK | TAS5754M_IDFS); + break; + case SND_SOC_DAIFMT_CBS_CFS: + case SND_SOC_DAIFMT_CBM_CFS: + default: + return -EINVAL; + } + + return 0; +} + +static int tas5754m_set_dividers_master(struct snd_soc_dai *dai, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_component *component = dai->component; + struct tas5754m_priv *tas5754m = + snd_soc_component_get_drvdata(component); + unsigned long bclk; + unsigned long mclk; + int bclk_div; + int lrclk_div; + int osr; + int ret; + + /* calculate divider settings based on mclk and sample_len */ + mclk = clk_get_rate(tas5754m->sclk); + bclk = tas5754m->sample_len * 2 * params_rate(params); + bclk_div = mclk / bclk; + lrclk_div = tas5754m->sample_len * 2; + osr = mclk / 4 / params_rate(params) / 16; + + /* stop LR / SCLK clocks */ + ret = regmap_update_bits(tas5754m->regmap, + TAS5754M_MASTER_MODE, 0, + TAS5754M_RLRK | TAS5754M_RBCK); + if (ret) { + dev_err(component->dev, "Failed to stop PLL\n"); + return ret; + } + /* set SCLK divider */ + ret = regmap_write(tas5754m->regmap, TAS5754M_MASTER_SCLKDIV, + bclk_div - 1); + if (ret) { + dev_err(component->dev, "Failed to set SCLK divider\n"); + return ret; + } + /* set LRCLK divider */ + ret = regmap_write(tas5754m->regmap, TAS5754M_MASTER_LRCLKDIV, + lrclk_div - 1); + if (ret) { + dev_err(component->dev, "Failed to set LRCLK divider\n"); + return ret; + } + ret = regmap_write(tas5754m->regmap, + TAS5754M_OSR_CLKDIV, osr - 1); + if (ret) { + dev_err(component->dev, "Failed to set OSR divider\n"); + return ret; + } + /* restart LR / SCLK clocks */ + ret = regmap_update_bits(tas5754m->regmap, + TAS5754M_MASTER_MODE, + TAS5754M_RLRK | TAS5754M_RBCK, + TAS5754M_RLRK | TAS5754M_RBCK); + if (ret) { + dev_err(component->dev, "Failed to restart PLL\n"); + return ret; + } + + return 0; +} + +static int tas5754m_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct tas5754m_priv *tas5754m = + snd_soc_component_get_drvdata(component); + int alen; + int ret; + + switch (params_width(params)) { + case 16: + tas5754m->sample_len = 16; + alen = TAS5754M_ALEN_16; + break; + case 20: + tas5754m->sample_len = 32; + alen = TAS5754M_ALEN_20; + break; + case 24: + tas5754m->sample_len = 32; + alen = TAS5754M_ALEN_24; + break; + case 32: + tas5754m->sample_len = 32; + alen = TAS5754M_ALEN_32; + break; + default: + dev_err(component->dev, "Unsupported sample size: %d\n", + params_width(params)); + return -EINVAL; + } + ret = regmap_update_bits(tas5754m->regmap, TAS5754M_I2S_1, alen, alen); + if (ret) { + dev_err(component->dev, + "Cannot set sample size: %d\n", ret); + return ret; + } + + ret = tas5754m_set_dai_mode(dai); + if (ret) { + dev_err(component->dev, + "DAI mode not supported: %d\n", ret); + return ret; + } + + ret = tas5754m_set_clock_tree_master(dai, params); + if (ret) + return ret; + + switch (params_rate(params)) { + case 44100: + case 48000: + ret = regmap_write(tas5754m->regmap, + TAS5754M_FS_SPEED_MODE, TAS5754M_FSSP_48KHZ); + break; + case 88200: + case 96000: + ret = regmap_write(tas5754m->regmap, + TAS5754M_FS_SPEED_MODE, TAS5754M_FSSP_96KHZ); + break; + case 176400: + case 192000: + ret = regmap_write(tas5754m->regmap, + TAS5754M_FS_SPEED_MODE, TAS5754M_FSSP_192KHZ); + break; + default: + dev_err(component->dev, "Sample rate not supported: %d\n", + params_rate(params)); + return -EINVAL; + } + if (ret) { + dev_err(component->dev, "Failed to config PLL\n"); + return ret; + } + + ret = tas5754m_set_dividers_master(dai, params); + if (ret) + return ret; + + return 0; +} + +static int tas5754m_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_component *component = dai->component; + struct tas5754m_priv *tas5754m = + snd_soc_component_get_drvdata(component); + + tas5754m->fmt = fmt; + + return 0; +} + + +static const struct snd_soc_component_driver tas5754m_soc_component = { + .set_bias_level = tas5754m_set_bias_level, + .idle_bias_on = true, + .controls = tas5754m_controls, + .num_controls = ARRAY_SIZE(tas5754m_controls), +}; + +static int tas5754m_mute(struct snd_soc_dai *dai, int mute, int stream) +{ + struct snd_soc_component *component = dai->component; + + if (mute) { + snd_soc_component_write(component, TAS5754M_MUTE, 0x11); + } else { + /* wait for stable operation before unmute */ + usleep_range(1000, 2000); + snd_soc_component_write(component, TAS5754M_MUTE, 0x00); + } + return 0; +} + +static const struct snd_soc_dai_ops tas5754m_dai_ops = { + .mute_stream = tas5754m_mute, + .hw_params = tas5754m_hw_params, + .set_fmt = tas5754m_set_fmt, +}; + +static struct snd_soc_dai_driver tas5754m_dai = { + .name = "tas5754m-amplifier", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = TAS5754M_RATES, + .formats = TAS5754M_FORMATS, + }, + .ops = &tas5754m_dai_ops, +}; + +static int tas5754m_probe(struct device *dev, struct regmap *regmap) +{ + struct tas5754m_priv *tas5754m; + int ret; + + tas5754m = devm_kzalloc(dev, sizeof(struct tas5754m_priv), GFP_KERNEL); + if (!tas5754m) + return -ENOMEM; + + dev_set_drvdata(dev, tas5754m); + tas5754m->regmap = regmap; + + ret = regmap_write(regmap, TAS5754M_RESET, + TAS5754M_RSTR | TAS5754M_RSTM); + if (ret) { + dev_err(dev, "Failed to initialize TAS5754M: %d\n", ret); + goto err; + } + + tas5754m->sclk = devm_clk_get(dev, NULL); + if (PTR_ERR(tas5754m->sclk) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto err; + } + if (!IS_ERR(tas5754m->sclk)) { + ret = clk_prepare_enable(tas5754m->sclk); + if (ret) { + dev_err(dev, "Failed to enable SCLK: %d\n", ret); + goto err; + } + } + + ret = devm_snd_soc_register_component(dev, + &tas5754m_soc_component, &tas5754m_dai, 1); + if (ret) { + dev_err(dev, "Failed to register CODEC: %d\n", ret); + goto err; + } + + return 0; + +err: + return ret; + +} + +static int tas5754m_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) +{ + struct regmap *regmap; + struct regmap_config config = tas5754m_regmap; + + /* enable auto-increment mode */ + config.read_flag_mask = 0x80; + config.write_flag_mask = 0x80; + + regmap = devm_regmap_init_i2c(i2c, &config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + return tas5754m_probe(&i2c->dev, regmap); +} + +static int tas5754m_remove(struct device *dev) +{ + snd_soc_unregister_component(dev); + + return 0; +} + +static int tas5754m_i2c_remove(struct i2c_client *i2c) +{ + tas5754m_remove(&i2c->dev); + + return 0; +} + +static const struct i2c_device_id tas5754m_i2c_id[] = { + { "tas5754m", }, + { "tas5756m", }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tas5754m_i2c_id); + +#ifdef CONFIG_OF +static const struct of_device_id tas5754m_of_match[] = { + { .compatible = "ti,tas5754m", }, + { .compatible = "ti,tas5756m", }, + { } +}; +MODULE_DEVICE_TABLE(of, tas5754m_of_match); +#endif + +static struct i2c_driver tas5754m_i2c_driver = { + .probe = tas5754m_i2c_probe, + .remove = tas5754m_i2c_remove, + .id_table = tas5754m_i2c_id, + .driver = { + .name = "tas5754m", + .of_match_table = of_match_ptr(tas5754m_of_match), + }, +}; + +module_i2c_driver(tas5754m_i2c_driver); + +MODULE_AUTHOR("Joerg Schambacher "); +MODULE_DESCRIPTION("TAS5754M Audio Amplifier Driver - Master mode only"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas5754m.h b/sound/soc/codecs/tas5754m.h new file mode 100644 index 000000000000..c6e26dba169f --- /dev/null +++ b/sound/soc/codecs/tas5754m.h @@ -0,0 +1,260 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Driver for the TAS575xM DAC+amplifier combo devices + * + * Author: (copied from pcm512x.h) + * Mark Brown + * Copyright 2014 Linaro Ltd + * + * Register names adapted and non available + * register definitions removed according + + to TAS5754M specification + * Joerg Schambacher + */ + +#ifndef _SND_SOC_TAS5754M +#define _SND_SOC_TAS5754M + +#include +#include + +#define TAS5754M_VIRT_BASE 0x000 +#define TAS5754M_PAGE_LEN 0x80 +#define TAS5754M_PAGE_BASE(n) (TAS5754M_VIRT_BASE + (TAS5754M_PAGE_LEN * n)) + +#define TAS5754M_PAGE 0 + +#define TAS5754M_RESET (TAS5754M_PAGE_BASE(0) + 1) +#define TAS5754M_POWER (TAS5754M_PAGE_BASE(0) + 2) +#define TAS5754M_MUTE (TAS5754M_PAGE_BASE(0) + 3) +#define TAS5754M_PLL_EN (TAS5754M_PAGE_BASE(0) + 4) +#define TAS5754M_DSP (TAS5754M_PAGE_BASE(0) + 7) +#define TAS5754M_GPIO_EN (TAS5754M_PAGE_BASE(0) + 8) +#define TAS5754M_BCLK_LRCLK_CFG (TAS5754M_PAGE_BASE(0) + 9) +#define TAS5754M_DSP_GPIO_INPUT (TAS5754M_PAGE_BASE(0) + 10) +#define TAS5754M_MASTER_MODE (TAS5754M_PAGE_BASE(0) + 12) +#define TAS5754M_PLL_REF (TAS5754M_PAGE_BASE(0) + 13) +#define TAS5754M_DAC_REF (TAS5754M_PAGE_BASE(0) + 14) +#define TAS5754M_GPIO_PLLIN (TAS5754M_PAGE_BASE(0) + 18) +#define TAS5754M_SYNCHRONIZE (TAS5754M_PAGE_BASE(0) + 19) +#define TAS5754M_PLL_COEFF_P (TAS5754M_PAGE_BASE(0) + 20) +#define TAS5754M_PLL_COEFF_J (TAS5754M_PAGE_BASE(0) + 21) +#define TAS5754M_PLL_COEFF_DH (TAS5754M_PAGE_BASE(0) + 22) +#define TAS5754M_PLL_COEFF_DL (TAS5754M_PAGE_BASE(0) + 23) +#define TAS5754M_PLL_COEFF_R (TAS5754M_PAGE_BASE(0) + 24) +#define TAS5754M_DSP_CLKDIV (TAS5754M_PAGE_BASE(0) + 27) +#define TAS5754M_DAC_CLKDIV (TAS5754M_PAGE_BASE(0) + 28) +#define TAS5754M_NCP_CLKDIV (TAS5754M_PAGE_BASE(0) + 29) +#define TAS5754M_OSR_CLKDIV (TAS5754M_PAGE_BASE(0) + 30) +#define TAS5754M_MASTER_SCLKDIV (TAS5754M_PAGE_BASE(0) + 32) +#define TAS5754M_MASTER_LRCLKDIV (TAS5754M_PAGE_BASE(0) + 33) +#define TAS5754M_FS_SPEED_MODE (TAS5754M_PAGE_BASE(0) + 34) +#define TAS5754M_IDAC_1 (TAS5754M_PAGE_BASE(0) + 35) +#define TAS5754M_IDAC_2 (TAS5754M_PAGE_BASE(0) + 36) +#define TAS5754M_ERROR_DETECT (TAS5754M_PAGE_BASE(0) + 37) +#define TAS5754M_I2S_1 (TAS5754M_PAGE_BASE(0) + 40) +#define TAS5754M_I2S_2 (TAS5754M_PAGE_BASE(0) + 41) +#define TAS5754M_DAC_ROUTING (TAS5754M_PAGE_BASE(0) + 42) +#define TAS5754M_DSP_PROGRAM (TAS5754M_PAGE_BASE(0) + 43) +#define TAS5754M_CLKDET (TAS5754M_PAGE_BASE(0) + 44) +#define TAS5754M_AUTO_MUTE (TAS5754M_PAGE_BASE(0) + 59) +#define TAS5754M_DIGITAL_VOLUME_1 (TAS5754M_PAGE_BASE(0) + 60) +#define TAS5754M_DIGITAL_VOLUME_2 (TAS5754M_PAGE_BASE(0) + 61) +#define TAS5754M_DIGITAL_VOLUME_3 (TAS5754M_PAGE_BASE(0) + 62) +#define TAS5754M_DIGITAL_MUTE_1 (TAS5754M_PAGE_BASE(0) + 63) +#define TAS5754M_DIGITAL_MUTE_2 (TAS5754M_PAGE_BASE(0) + 64) +#define TAS5754M_DIGITAL_MUTE_3 (TAS5754M_PAGE_BASE(0) + 65) +#define TAS5754M_GPIO_OUTPUT_1 (TAS5754M_PAGE_BASE(0) + 82) +#define TAS5754M_GPIO_OUTPUT_0 (TAS5754M_PAGE_BASE(0) + 83) +#define TAS5754M_GPIO_OUTPUT_2 (TAS5754M_PAGE_BASE(0) + 85) +#define TAS5754M_GPIO_CONTROL_1 (TAS5754M_PAGE_BASE(0) + 86) +#define TAS5754M_GPIO_CONTROL_2 (TAS5754M_PAGE_BASE(0) + 87) +#define TAS5754M_OVERFLOW (TAS5754M_PAGE_BASE(0) + 90) +#define TAS5754M_RATE_DET_1 (TAS5754M_PAGE_BASE(0) + 91) +#define TAS5754M_RATE_DET_2 (TAS5754M_PAGE_BASE(0) + 92) +#define TAS5754M_RATE_DET_3 (TAS5754M_PAGE_BASE(0) + 93) +#define TAS5754M_RATE_DET_4 (TAS5754M_PAGE_BASE(0) + 94) +#define TAS5754M_CLOCK_STATUS (TAS5754M_PAGE_BASE(0) + 95) +#define TAS5754M_ANALOG_MUTE_DET (TAS5754M_PAGE_BASE(0) + 108) +#define TAS5754M_FS_MODE_MON (TAS5754M_PAGE_BASE(0) + 115) +#define TAS5754M_GPIN (TAS5754M_PAGE_BASE(0) + 119) +#define TAS5754M_DIGITAL_MUTE_DET (TAS5754M_PAGE_BASE(0) + 120) + +#define TAS5754M_OUTPUT_AMPLITUDE (TAS5754M_PAGE_BASE(1) + 1) +#define TAS5754M_ANALOG_GAIN_CTRL (TAS5754M_PAGE_BASE(1) + 2) +#define TAS5754M_UNDERVOLTAGE_PROT (TAS5754M_PAGE_BASE(1) + 5) +#define TAS5754M_ANALOG_MUTE_CTRL (TAS5754M_PAGE_BASE(1) + 6) +#define TAS5754M_ANALOG_GAIN_BOOST (TAS5754M_PAGE_BASE(1) + 7) +#define TAS5754M_VCOM_CTRL_1 (TAS5754M_PAGE_BASE(1) + 8) +#define TAS5754M_VCOM_CTRL_2 (TAS5754M_PAGE_BASE(1) + 9) + +#define TAS5754M_CRAM_CTRL (TAS5754M_PAGE_BASE(44) + 1) + +#define TAS5754M_FLEX_A (TAS5754M_PAGE_BASE(253) + 63) +#define TAS5754M_FLEX_B (TAS5754M_PAGE_BASE(253) + 64) + +#define TAS5754M_MAX_REGISTER (TAS5754M_PAGE_BASE(253) + 64) + +/* Page 0, Register 1 - reset */ +#define TAS5754M_RSTR (1 << 0) +#define TAS5754M_RSTM (1 << 4) + +/* Page 0, Register 2 - power */ +#define TAS5754M_RQPD (1 << 0) +#define TAS5754M_RQPD_SHIFT 0 +#define TAS5754M_RQST (1 << 4) +#define TAS5754M_RQST_SHIFT 4 + +/* Page 0, Register 3 - mute */ +#define TAS5754M_RQMR (1 << 0) +#define TAS5754M_RQMR_SHIFT 0 +#define TAS5754M_RQML (1 << 4) +#define TAS5754M_RQML_SHIFT 4 + +/* Page 0, Register 4 - PLL */ +#define TAS5754M_PLLE (1 << 0) +#define TAS5754M_PLLE_SHIFT 0 +#define TAS5754M_PLCK (1 << 4) +#define TAS5754M_PLCK_SHIFT 4 + +/* Page 0, Register 7 - DSP */ +#define TAS5754M_SDSL (1 << 0) +#define TAS5754M_SDSL_SHIFT 0 +#define TAS5754M_DEMP (1 << 4) +#define TAS5754M_DEMP_SHIFT 4 + +/* Page 0, Register 8 - GPIO output enable */ +#define TAS5754M_G1OE (1 << 0) +#define TAS5754M_G2OE (1 << 1) +#define TAS5754M_G3OE (1 << 2) +#define TAS5754M_G4OE (1 << 3) +#define TAS5754M_G5OE (1 << 4) +#define TAS5754M_G6OE (1 << 5) + +/* Page 0, Register 9 - BCK, LRCLK configuration */ +#define TAS5754M_LRKO (1 << 0) +#define TAS5754M_LRKO_SHIFT 0 +#define TAS5754M_BCKO (1 << 4) +#define TAS5754M_BCKO_SHIFT 4 +#define TAS5754M_BCKP (1 << 5) +#define TAS5754M_BCKP_SHIFT 5 + +/* Page 0, Register 12 - Master mode BCK, LRCLK reset */ +#define TAS5754M_RLRK (1 << 0) +#define TAS5754M_RLRK_SHIFT 0 +#define TAS5754M_RBCK (1 << 1) +#define TAS5754M_RBCK_SHIFT 1 + +/* Page 0, Register 13 - PLL reference */ +#define TAS5754M_SREF (7 << 4) +#define TAS5754M_SREF_SHIFT 4 +#define TAS5754M_SREF_SCK (0 << 4) +#define TAS5754M_SREF_BCK (1 << 4) +#define TAS5754M_SREF_GPIO (3 << 4) + +/* Page 0, Register 14 - DAC reference */ +#define TAS5754M_SDAC (7 << 4) +#define TAS5754M_SDAC_SHIFT 4 +#define TAS5754M_SDAC_MCK (0 << 4) +#define TAS5754M_SDAC_PLL (1 << 4) +#define TAS5754M_SDAC_SCK (3 << 4) +#define TAS5754M_SDAC_BCK (4 << 4) +#define TAS5754M_SDAC_GPIO (5 << 4) + +/* Page 0, Register 16, 18 - GPIO source for DAC, PLL */ +#define TAS5754M_GREF (7 << 0) +#define TAS5754M_GREF_SHIFT 0 +#define TAS5754M_GREF_GPIO1 (0 << 0) +#define TAS5754M_GREF_GPIO2 (1 << 0) +#define TAS5754M_GREF_GPIO3 (2 << 0) +#define TAS5754M_GREF_GPIO4 (3 << 0) +#define TAS5754M_GREF_GPIO5 (4 << 0) +#define TAS5754M_GREF_GPIO6 (5 << 0) + +/* Page 0, Register 19 - synchronize */ +#define TAS5754M_RQSY (1 << 0) +#define TAS5754M_RQSY_RESUME (0 << 0) +#define TAS5754M_RQSY_HALT (1 << 0) + +/* Page 0, Register 34 - fs speed mode */ +#define TAS5754M_FSSP (3 << 0) +#define TAS5754M_FSSP_SHIFT 0 +#define TAS5754M_FSSP_48KHZ (0 << 0) +#define TAS5754M_FSSP_96KHZ (1 << 0) +#define TAS5754M_FSSP_192KHZ (2 << 0) +#define TAS5754M_FSSP_384KHZ (3 << 0) + +/* Page 0, Register 37 - Error detection */ +#define TAS5754M_IPLK (1 << 0) +#define TAS5754M_DCAS (1 << 1) +#define TAS5754M_IDCM (1 << 2) +#define TAS5754M_IDCH (1 << 3) +#define TAS5754M_IDSK (1 << 4) +#define TAS5754M_IDBK (1 << 5) +#define TAS5754M_IDFS (1 << 6) + +/* Page 0, Register 40 - I2S configuration */ +#define TAS5754M_ALEN (3 << 0) +#define TAS5754M_ALEN_SHIFT 0 +#define TAS5754M_ALEN_16 (0 << 0) +#define TAS5754M_ALEN_20 (1 << 0) +#define TAS5754M_ALEN_24 (2 << 0) +#define TAS5754M_ALEN_32 (3 << 0) +#define TAS5754M_AFMT (3 << 4) +#define TAS5754M_AFMT_SHIFT 4 +#define TAS5754M_AFMT_I2S (0 << 4) +#define TAS5754M_AFMT_DSP (1 << 4) +#define TAS5754M_AFMT_RTJ (2 << 4) +#define TAS5754M_AFMT_LTJ (3 << 4) + +/* Page 0, Register 42 - DAC routing */ +#define TAS5754M_AUPR_SHIFT 0 +#define TAS5754M_AUPL_SHIFT 4 + +/* Page 0, Register 59 - auto mute */ +#define TAS5754M_ATMR_SHIFT 0 +#define TAS5754M_ATML_SHIFT 4 + +/* Page 0, Register 63 - ramp rates */ +#define TAS5754M_VNDF_SHIFT 6 +#define TAS5754M_VNDS_SHIFT 4 +#define TAS5754M_VNUF_SHIFT 2 +#define TAS5754M_VNUS_SHIFT 0 + +/* Page 0, Register 64 - emergency ramp rates */ +#define TAS5754M_VEDF_SHIFT 6 +#define TAS5754M_VEDS_SHIFT 4 + +/* Page 0, Register 65 - Digital mute enables */ +#define TAS5754M_ACTL_SHIFT 2 +#define TAS5754M_AMLE_SHIFT 1 +#define TAS5754M_AMRE_SHIFT 0 + +/* Page 0, Register 80-85, GPIO output selection */ +#define TAS5754M_GxSL (31 << 0) +#define TAS5754M_GxSL_SHIFT 0 +#define TAS5754M_GxSL_OFF (0 << 0) +#define TAS5754M_GxSL_DSP (1 << 0) +#define TAS5754M_GxSL_REG (2 << 0) +#define TAS5754M_GxSL_AMUTB (3 << 0) +#define TAS5754M_GxSL_AMUTL (4 << 0) +#define TAS5754M_GxSL_AMUTR (5 << 0) +#define TAS5754M_GxSL_CLKI (6 << 0) +#define TAS5754M_GxSL_SDOUT (7 << 0) +#define TAS5754M_GxSL_ANMUL (8 << 0) +#define TAS5754M_GxSL_ANMUR (9 << 0) +#define TAS5754M_GxSL_PLLLK (10 << 0) +#define TAS5754M_GxSL_CPCLK (11 << 0) +#define TAS5754M_GxSL_UV0_7 (14 << 0) +#define TAS5754M_GxSL_UV0_3 (15 << 0) +#define TAS5754M_GxSL_PLLCK (16 << 0) + +/* Page 1, Register 2 - analog volume control */ +#define TAS5754M_RAGN_SHIFT 0 +#define TAS5754M_LAGN_SHIFT 4 + +/* Page 1, Register 7 - analog boost control */ +#define TAS5754M_AGBR_SHIFT 0 +#define TAS5754M_AGBL_SHIFT 4 + +#endif -- 2.25.1 From mboxrd@z Thu Jan 1 00:00:00 1970 Content-Type: multipart/mixed; boundary="===============3083884271299997605==" MIME-Version: 1.0 From: Joerg Schambacher To: kbuild-all@lists.01.org Subject: Re: [PATCH v4] ASoC: adds component driver for TAS575xM digital amplifiers Date: Wed, 19 Jan 2022 14:05:46 +0100 Message-ID: <20220119130546.GB2144@ubuntu> In-Reply-To: <8f62aa37-c2a6-1a74-6e6f-5208b10b96ec@intel.com> List-Id: --===============3083884271299997605== Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Cezary, Thanks for your review and the feedback. I hope I've fixed all issues. Joerg On Mon, Jan 10, 2022 at 05:25:14PM +0100, Cezary Rojewski wrote: > On 2022-01-10 9:45 AM, Joerg Schambacher wrote: > > Adds a minimum component driver to run the amplifier in I2S master > > mode only from standard audio clocks. Therefore, it only allows > > 44.1, 88.2, 176.4, 48, 96 and 192ksps with 16, 20, 24 and 32 bits > > sample size. Digital volume control and the -6dB and +0.8dB switches > > are supported. > = > Couple nitpicks and suggestions below. > = > (...) > = > > +static int tas5754m_set_bias_level(struct snd_soc_component *component, > > + enum snd_soc_bias_level level) > > +{ > > + struct tas5754m_priv *tas5754m =3D > > + snd_soc_component_get_drvdata(component); > > + int ret; > > + > > + switch (level) { > > + case SND_SOC_BIAS_ON: > > + case SND_SOC_BIAS_PREPARE: > > + break; > > + > > + case SND_SOC_BIAS_STANDBY: > > + ret =3D regmap_update_bits(tas5754m->regmap, > > + TAS5754M_POWER, TAS5754M_RQST, 0); > > + if (ret !=3D 0) { > = > I believe we are dealing here with standard API function i.e. 0 on success > and negative value on error. And thus, 'if (ret)' suffices. > = yes, fixed > > + dev_err(component->dev, > > + "Failed to remove standby: %d\n", ret); > > + return ret; > > + } > > + break; > > + > > + case SND_SOC_BIAS_OFF: > > + ret =3D regmap_update_bits(tas5754m->regmap, > > + TAS5754M_POWER, TAS5754M_RQST, TAS5754M_RQST); > > + if (ret !=3D 0) { > = > Ditto. This also goes for every single usage of regmap_xxx() in this file. > = > > + dev_err(component->dev, > > + "Failed to request standby: %d\n", ret); > > + return ret; > > + } > > + break; > > + } > > + > > + return 0; > = > You could also drop the 'return ret' from the if-statements above - grant= ing > you also ability to drop the brackets - and instead return 'ret' instead = of > '0' here. Of course that means 'ret' needs to be initialized appropriately > at the top of the function. yes, fixed as recommended > = > > +} > > + > > +int tas5754m_set_clock_tree_master(struct snd_soc_dai *dai, > > + struct snd_pcm_hw_params *params) > = > Indentation seems off. aligned all functions/parameters > = > > +{ > > + struct snd_soc_component *component =3D dai->component; > > + struct tas5754m_priv *tas5754m =3D > > + snd_soc_component_get_drvdata(component); > > + static const struct reg_sequence pll_settings[] =3D { > > + { TAS5754M_PLL_COEFF_P, 0x01 }, // P=3D2 > > + { TAS5754M_PLL_COEFF_J, 0x08 }, // J=3D8 > > + { TAS5754M_PLL_COEFF_DL, 0x00 }, // D12-8 =3D 0 > > + { TAS5754M_PLL_COEFF_DH, 0x00 }, // D7-0 =3D 0 > > + { TAS5754M_PLL_COEFF_R, 0x00 }, // R=3D1 > > + }; > > + int ret; > > + > > + /* disable PLL before any clock tree change */ > > + ret =3D regmap_update_bits(tas5754m->regmap, TAS5754M_PLL_EN, > > + TAS5754M_PLLE, 0); > > + if (ret !=3D 0) { > > + dev_err(component->dev, "Failed to disable PLL: %d\n", ret); > > + return ret; > > + } > > + > > + /* set DAC clock source to MCLK */ > > + ret =3D regmap_write(tas5754m->regmap, TAS5754M_DAC_REF, 0x30); > > + if (ret !=3D 0) { > > + dev_err(component->dev, "Failed to set DAC ref\n"); > > + return ret; > > + } > > + > > + /* run PLL at fixed ratio to MCLK */ > > + ret =3D regmap_multi_reg_write(tas5754m->regmap, pll_settings, > > + ARRAY_SIZE(pll_settings)); > > + if (ret !=3D 0) { > > + dev_err(component->dev, "Failed to set PLL ratio\n"); > > + return ret; > > + } > > + > > + /* set DSP divider to 2 =3D> reg 0x01 */ > > + ret =3D regmap_write(tas5754m->regmap, TAS5754M_DSP_CLKDIV, 1); > > + if (ret !=3D 0) { > > + dev_err(component->dev, "Failed to set DSP divider\n"); > > + return ret; > > + } > > + /* set DAC divider to 4 =3D> reg 0x03*/ > > + ret =3D regmap_write(tas5754m->regmap, TAS5754M_DAC_CLKDIV, 3); > > + if (ret !=3D 0) { > > + dev_err(component->dev, "Failed to set OSDACR divider\n"); > > + return ret; > > + } > > + /* set OSR divider to 1 */ > > + ret =3D regmap_write(tas5754m->regmap, TAS5754M_OSR_CLKDIV, 0); > > + if (ret !=3D 0) { > > + dev_err(component->dev, "Failed to set OSR divider\n"); > > + return ret; > > + } > > + /* set CP divider to 4 =3D> reg 0x03*/ > > + ret =3D regmap_write(tas5754m->regmap, TAS5754M_NCP_CLKDIV, 3); > > + if (ret !=3D 0) { > > + dev_err(component->dev, "Failed to set CP divider\n"); > > + return ret; > > + } > > + /* finally enable PLL */ > > + ret =3D regmap_update_bits(tas5754m->regmap, TAS5754M_PLL_EN, > > + TAS5754M_PLLE, 1); > > + if (ret !=3D 0) { > > + dev_err(component->dev, "Failed to enable PLL: %d\n", ret); > > + return ret; > > + } > > + > > + return 0; > > +} > = > I'd suggest to keep the logical block organization cohesive. Especially if > there are several of them all located within a single function. Some of t= he > do/check/error-out blocks above are separated by a newline from the > following ones, and some are not. > = > Another point is the cohesiveness of the error-message format. Some of the > above print value of 'ret' i.e. carry additional value whereas other skip > that part. Is this intentional? done following your suggestions > = > > + > > +int tas5754m_set_dai_mode(struct snd_soc_dai *dai) > > +{ > > + struct snd_soc_component *component =3D dai->component; > > + struct tas5754m_priv *tas5754m =3D > > + snd_soc_component_get_drvdata(component); > > + int fmt =3D tas5754m->fmt; > > + > > + /* only I2S MASTER mode implemented */ > > + if (((fmt & SND_SOC_DAIFMT_FORMAT_MASK) !=3D SND_SOC_DAIFMT_I2S)) { > = > Maybe I'm missing something but the most outter pair of brackets is > redundant. Removed the brackets - I once had a warning like 'brackets around boolean e= xpression' - but it works correct now. > = > > + dev_err(component->dev, > > + "DAI format not supported (I2S master only)\n"); > > + return -EINVAL; > > + } > > + /* TAS5754/6m do not support inverted clocks in MASTER mode */ > = > A newline before the comment would make this more readabile - that's a new > logical block afterall. fixed > = > > + if (((fmt & SND_SOC_DAIFMT_CLOCK_MASK) !=3D SND_SOC_DAIFMT_NB_NF)) { > = > Again, I may be missing something, but this looks like outter brackets are > redundant. > = > > + dev_err(component->dev, "Inverted clocks not supported\n"); > > + return -EINVAL; > > + } > > + > > + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { > > + case SND_SOC_DAIFMT_CBM_CFM: > > + regmap_update_bits(tas5754m->regmap, > > + TAS5754M_BCLK_LRCLK_CFG, > > + TAS5754M_LRKO | TAS5754M_BCKO, > > + TAS5754M_LRKO | TAS5754M_BCKO); > > + /* reset CLK dividers */ > > + regmap_update_bits(tas5754m->regmap, > > + TAS5754M_MASTER_MODE, > > + 0x00, > > + TAS5754M_RLRK | TAS5754M_RBCK); > > + /* ignore all clock error detection but MCLK */ > > + regmap_update_bits(tas5754m->regmap, > > + TAS5754M_ERROR_DETECT, > > + TAS5754M_IPLK | TAS5754M_DCAS | > > + TAS5754M_IDCM | TAS5754M_IDSK | > > + TAS5754M_IDBK | TAS5754M_IDFS, > > + TAS5754M_IPLK | TAS5754M_DCAS | > > + TAS5754M_IDCM | TAS5754M_IDSK | > > + TAS5754M_IDBK | TAS5754M_IDFS); > > + break; > > + case SND_SOC_DAIFMT_CBS_CFS: > > + case SND_SOC_DAIFMT_CBM_CFS: > > + default: > > + return -EINVAL; > > + } > > + > > + return 0; > > +} > > + > > +int tas5754m_set_dividers_master(struct snd_soc_dai *dai, > > + struct snd_pcm_hw_params *params) > > +{ > > + struct snd_soc_component *component =3D dai->component; > > + struct tas5754m_priv *tas5754m =3D > > + snd_soc_component_get_drvdata(component); > > + unsigned long bclk; > > + unsigned long mclk; > > + int bclk_div; > > + int lrclk_div; > > + int osr; > > + int ret; > > + > > + mclk =3D clk_get_rate(tas5754m->sclk); > > + bclk =3D tas5754m->sample_len * 2 * params_rate(params); > > + bclk_div =3D mclk / bclk; > > + lrclk_div =3D tas5754m->sample_len * 2; > > + osr =3D mclk / 4 / params_rate(params) / 16; > = > Is there a specific reason as to why these magic numbers aren't > defines/constants? mclk and sample_len vary: can be 22.5792/24.576MHz and 16/32 bits > = > > + > > + // stop LR / SCLK clocks > = > Formatting of this comment looks odd. Please align with the recommended o= ne. > = > = > (...) > = > = > Regards, > Czarek >>From 06172ee3aff67edb09c934d96740ced85a70e8f6 Mon Sep 17 00:00:00 2001 From: Joerg Schambacher Date: Tue, 5 Oct 2021 14:38:21 +0200 Subject: [PATCH] ASoC: adds component driver for TAS575xM digital amplifiers Adds a minimum component driver to run the amplifier in I2S master mode only from standard audio clocks. Therefore, it only allows 44.1, 88.2, 176.4, 48, 96 and 192ksps with 16, 20, 24 and 32 bits sample size. Digital volume control and the -6dB and +0.8dB switches are supported. Signed-off-by: Joerg Schambacher --- sound/soc/codecs/Kconfig | 8 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas5754m.c | 691 ++++++++++++++++++++++++++++++++++++ sound/soc/codecs/tas5754m.h | 260 ++++++++++++++ 4 files changed, 961 insertions(+) create mode 100644 sound/soc/codecs/tas5754m.c create mode 100644 sound/soc/codecs/tas5754m.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 82ee233a269d..cf0584948fcf 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -210,6 +210,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_TAS5086 imply SND_SOC_TAS571X imply SND_SOC_TAS5720 + imply SND_SOC_TAS5754M imply SND_SOC_TAS6424 imply SND_SOC_TDA7419 imply SND_SOC_TFA9879 @@ -1419,6 +1420,13 @@ config SND_SOC_TAS5720 Enable support for Texas Instruments TAS5720L/M high-efficiency mono Class-D audio power amplifiers. = +config SND_SOC_TAS5754M + tristate "Texas Instruments TAS5754M Digital Input Audio amplifier" + depends on I2C + help + Enable support for Texas Instruments TAS5754M digital input + Class-D audio power amplifiers. + config SND_SOC_TAS6424 tristate "Texas Instruments TAS6424 Quad-Channel Audio amplifier" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 8dcea2c4604a..39984900258a 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -227,6 +227,7 @@ snd-soc-sti-sas-objs :=3D sti-sas.o snd-soc-tas5086-objs :=3D tas5086.o snd-soc-tas571x-objs :=3D tas571x.o snd-soc-tas5720-objs :=3D tas5720.o +snd-soc-tas5754m-objs :=3D tas5754m.o snd-soc-tas6424-objs :=3D tas6424.o snd-soc-tda7419-objs :=3D tda7419.o snd-soc-tas2770-objs :=3D tas2770.o @@ -555,6 +556,7 @@ obj-$(CONFIG_SND_SOC_TAS2764) +=3D snd-soc-tas2764.o obj-$(CONFIG_SND_SOC_TAS5086) +=3D snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TAS571X) +=3D snd-soc-tas571x.o obj-$(CONFIG_SND_SOC_TAS5720) +=3D snd-soc-tas5720.o +obj-$(CONFIG_SND_SOC_TAS5754M) +=3D snd-soc-tas5754m.o obj-$(CONFIG_SND_SOC_TAS6424) +=3D snd-soc-tas6424.o obj-$(CONFIG_SND_SOC_TDA7419) +=3D snd-soc-tda7419.o obj-$(CONFIG_SND_SOC_TAS2770) +=3D snd-soc-tas2770.o diff --git a/sound/soc/codecs/tas5754m.c b/sound/soc/codecs/tas5754m.c new file mode 100644 index 000000000000..5aec0c1c6aeb --- /dev/null +++ b/sound/soc/codecs/tas5754m.c @@ -0,0 +1,691 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for the TAS5754M Audio Amplifier + * + * Author: Joerg Schambacher + * with fragments from Andy Liu + * + * The driver supports I2S master mode only with standard audio + * frequencies 44.1 to 192 ksps from a 24.576/22.2592MHz master + * clock input + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "tas5754m.h" + +#define TAS5754M_RATES (SNDRV_PCM_RATE_48000 | \ + SNDRV_PCM_RATE_96000 | \ + SNDRV_PCM_RATE_192000 | \ + SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_88200 | \ + SNDRV_PCM_RATE_176400) +#define TAS5754M_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S20_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + + +static const struct reg_default tas5754m_reg_defaults[] =3D { + { TAS5754M_RESET, 0x00 }, + { TAS5754M_POWER, 0x00 }, + { TAS5754M_MUTE, 0x00 }, + { TAS5754M_DSP, 0x00 }, + { TAS5754M_PLL_REF, 0x00 }, + { TAS5754M_DAC_REF, 0x00 }, + { TAS5754M_DAC_ROUTING, 0x11 }, + { TAS5754M_DSP_PROGRAM, 0x01 }, + { TAS5754M_CLKDET, 0x00 }, + { TAS5754M_AUTO_MUTE, 0x00 }, + { TAS5754M_ERROR_DETECT, 0x00 }, + { TAS5754M_DIGITAL_VOLUME_1, 0x00 }, + { TAS5754M_DIGITAL_VOLUME_2, 0x30 }, + { TAS5754M_DIGITAL_VOLUME_3, 0x30 }, + { TAS5754M_DIGITAL_MUTE_1, 0x22 }, + { TAS5754M_DIGITAL_MUTE_2, 0x00 }, + { TAS5754M_DIGITAL_MUTE_3, 0x07 }, + { TAS5754M_OUTPUT_AMPLITUDE, 0x00 }, + { TAS5754M_ANALOG_GAIN_CTRL, 0x00 }, + { TAS5754M_UNDERVOLTAGE_PROT, 0x00 }, + { TAS5754M_ANALOG_MUTE_CTRL, 0x00 }, + { TAS5754M_ANALOG_GAIN_BOOST, 0x00 }, + { TAS5754M_VCOM_CTRL_1, 0x00 }, + { TAS5754M_VCOM_CTRL_2, 0x01 }, + { TAS5754M_BCLK_LRCLK_CFG, 0x00 }, + { TAS5754M_MASTER_MODE, 0x7c }, + { TAS5754M_GPIO_PLLIN, 0x00 }, + { TAS5754M_SYNCHRONIZE, 0x10 }, + { TAS5754M_PLL_COEFF_P, 0x00 }, + { TAS5754M_PLL_COEFF_J, 0x00 }, + { TAS5754M_PLL_COEFF_DH, 0x00 }, + { TAS5754M_PLL_COEFF_DL, 0x00 }, + { TAS5754M_PLL_COEFF_R, 0x00 }, + { TAS5754M_DSP_CLKDIV, 0x00 }, + { TAS5754M_DAC_CLKDIV, 0x00 }, + { TAS5754M_NCP_CLKDIV, 0x00 }, + { TAS5754M_OSR_CLKDIV, 0x00 }, + { TAS5754M_MASTER_SCLKDIV, 0x00 }, + { TAS5754M_MASTER_LRCLKDIV, 0x00 }, + { TAS5754M_FS_SPEED_MODE, 0x00 }, + { TAS5754M_IDAC_1, 0x01 }, + { TAS5754M_IDAC_2, 0x00 }, +}; + +static bool tas5754m_readable(struct device *dev, unsigned int reg) +{ + switch (reg) { + case TAS5754M_RESET: + case TAS5754M_POWER: + case TAS5754M_MUTE: + case TAS5754M_PLL_EN: + case TAS5754M_DSP: + case TAS5754M_GPIO_EN: + case TAS5754M_BCLK_LRCLK_CFG: + case TAS5754M_DSP_GPIO_INPUT: + case TAS5754M_MASTER_MODE: + case TAS5754M_PLL_REF: + case TAS5754M_DAC_REF: + case TAS5754M_GPIO_PLLIN: + case TAS5754M_SYNCHRONIZE: + case TAS5754M_PLL_COEFF_P: + case TAS5754M_PLL_COEFF_J: + case TAS5754M_PLL_COEFF_DH: + case TAS5754M_PLL_COEFF_DL: + case TAS5754M_PLL_COEFF_R: + case TAS5754M_DSP_CLKDIV: + case TAS5754M_DAC_CLKDIV: + case TAS5754M_NCP_CLKDIV: + case TAS5754M_OSR_CLKDIV: + case TAS5754M_MASTER_SCLKDIV: + case TAS5754M_MASTER_LRCLKDIV: + case TAS5754M_FS_SPEED_MODE: + case TAS5754M_IDAC_1: + case TAS5754M_IDAC_2: + case TAS5754M_ERROR_DETECT: + case TAS5754M_I2S_1: + case TAS5754M_I2S_2: + case TAS5754M_DAC_ROUTING: + case TAS5754M_DSP_PROGRAM: + case TAS5754M_CLKDET: + case TAS5754M_AUTO_MUTE: + case TAS5754M_DIGITAL_VOLUME_1: + case TAS5754M_DIGITAL_VOLUME_2: + case TAS5754M_DIGITAL_VOLUME_3: + case TAS5754M_DIGITAL_MUTE_1: + case TAS5754M_DIGITAL_MUTE_2: + case TAS5754M_DIGITAL_MUTE_3: + case TAS5754M_GPIO_OUTPUT_0: + case TAS5754M_GPIO_OUTPUT_1: + case TAS5754M_GPIO_OUTPUT_2: + case TAS5754M_GPIO_CONTROL_1: + case TAS5754M_GPIO_CONTROL_2: + case TAS5754M_OVERFLOW: + case TAS5754M_RATE_DET_1: + case TAS5754M_RATE_DET_2: + case TAS5754M_RATE_DET_3: + case TAS5754M_RATE_DET_4: + case TAS5754M_CLOCK_STATUS: + case TAS5754M_ANALOG_MUTE_DET: + case TAS5754M_GPIN: + case TAS5754M_DIGITAL_MUTE_DET: + case TAS5754M_OUTPUT_AMPLITUDE: + case TAS5754M_ANALOG_GAIN_CTRL: + case TAS5754M_UNDERVOLTAGE_PROT: + case TAS5754M_ANALOG_MUTE_CTRL: + case TAS5754M_ANALOG_GAIN_BOOST: + case TAS5754M_VCOM_CTRL_1: + case TAS5754M_VCOM_CTRL_2: + case TAS5754M_CRAM_CTRL: + case TAS5754M_FLEX_A: + case TAS5754M_FLEX_B: + return true; + default: + return reg < 0x7f; + } +} + +static bool tas5754m_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case TAS5754M_PLL_EN: + case TAS5754M_OVERFLOW: + case TAS5754M_RATE_DET_1: + case TAS5754M_RATE_DET_2: + case TAS5754M_RATE_DET_3: + case TAS5754M_RATE_DET_4: + case TAS5754M_CLOCK_STATUS: + case TAS5754M_ANALOG_MUTE_DET: + case TAS5754M_GPIN: + case TAS5754M_DIGITAL_MUTE_DET: + case TAS5754M_CRAM_CTRL: + return true; + default: + return reg < 0x7f; + } +} + +struct tas5754m_priv { + struct regmap *regmap; + struct clk *sclk; + int sample_len; + int fmt; + int mode; +}; + +static const struct regmap_range_cfg tas5754m_range =3D { + .name =3D "Pages", + .range_min =3D TAS5754M_VIRT_BASE, + .range_max =3D TAS5754M_MAX_REGISTER, + .selector_reg =3D TAS5754M_PAGE, + .selector_mask =3D 0x7f, + .window_start =3D 0, + .window_len =3D 128, +}; + +const struct regmap_config tas5754m_regmap =3D { + .reg_bits =3D 8, + .val_bits =3D 8, + + .ranges =3D &tas5754m_range, + .num_ranges =3D 1, + .max_register =3D TAS5754M_MAX_REGISTER, + + .reg_defaults =3D tas5754m_reg_defaults, + .num_reg_defaults =3D ARRAY_SIZE(tas5754m_reg_defaults), + .readable_reg =3D tas5754m_readable, + .volatile_reg =3D tas5754m_volatile, + + .cache_type =3D REGCACHE_RBTREE, +}; + +static const DECLARE_TLV_DB_SCALE(digital_tlv, -10350, 50, 1); +static const DECLARE_TLV_DB_SCALE(analog_tlv, -600, 600, 0); +static const DECLARE_TLV_DB_SCALE(boost_tlv, 0, 80, 0); + +static const struct snd_kcontrol_new tas5754m_controls[] =3D { +SOC_DOUBLE_R_TLV("Digital Playback Volume", TAS5754M_DIGITAL_VOLUME_2, + TAS5754M_DIGITAL_VOLUME_3, 0, 255, 1, digital_tlv), +SOC_DOUBLE_TLV("Analog Playback Volume", TAS5754M_ANALOG_GAIN_CTRL, + TAS5754M_LAGN_SHIFT, TAS5754M_RAGN_SHIFT, 1, 1, analog_tlv), +SOC_DOUBLE_TLV("Analogue Playback Boost Volume", TAS5754M_ANALOG_GAIN_BOOS= T, + TAS5754M_AGBL_SHIFT, TAS5754M_AGBR_SHIFT, 1, 0, boost_tlv), +}; + +static int tas5754m_set_bias_level(struct snd_soc_component *component, + enum snd_soc_bias_level level) +{ + struct tas5754m_priv *tas5754m =3D + snd_soc_component_get_drvdata(component); + int ret; + + switch (level) { + default: + case SND_SOC_BIAS_ON: + case SND_SOC_BIAS_PREPARE: + break; + + case SND_SOC_BIAS_STANDBY: + ret =3D regmap_update_bits(tas5754m->regmap, + TAS5754M_POWER, TAS5754M_RQST, 0); + if (ret) + dev_err(component->dev, + "Failed to remove standby: %d\n", ret); + break; + + case SND_SOC_BIAS_OFF: + ret =3D regmap_update_bits(tas5754m->regmap, + TAS5754M_POWER, TAS5754M_RQST, TAS5754M_RQST); + if (ret) + dev_err(component->dev, + "Failed to request standby: %d\n", ret); + break; + } + + return ret; +} + +static int tas5754m_set_clock_tree_master(struct snd_soc_dai *dai, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_component *component =3D dai->component; + struct tas5754m_priv *tas5754m =3D + snd_soc_component_get_drvdata(component); + static const struct reg_sequence pll_settings[] =3D { + { TAS5754M_PLL_COEFF_P, 0x01 }, // P=3D2 + { TAS5754M_PLL_COEFF_J, 0x08 }, // J=3D8 + { TAS5754M_PLL_COEFF_DL, 0x00 }, // D12-8 =3D 0 + { TAS5754M_PLL_COEFF_DH, 0x00 }, // D7-0 =3D 0 + { TAS5754M_PLL_COEFF_R, 0x00 }, // R=3D1 + }; + int ret; + + /* disable PLL before any clock tree change */ + ret =3D regmap_update_bits(tas5754m->regmap, TAS5754M_PLL_EN, + TAS5754M_PLLE, 0); + if (ret) { + dev_err(component->dev, "Failed to disable PLL\n"); + return ret; + } + /* set DAC clock source to MCLK */ + ret =3D regmap_write(tas5754m->regmap, TAS5754M_DAC_REF, 0x30); + if (ret) { + dev_err(component->dev, "Failed to set DAC ref\n"); + return ret; + } + /* run PLL at fixed ratio to MCLK */ + ret =3D regmap_multi_reg_write(tas5754m->regmap, pll_settings, + ARRAY_SIZE(pll_settings)); + if (ret) { + dev_err(component->dev, "Failed to set PLL ratio\n"); + return ret; + } + /* set DSP divider to 2 =3D> reg 0x01 */ + ret =3D regmap_write(tas5754m->regmap, TAS5754M_DSP_CLKDIV, 1); + if (ret) { + dev_err(component->dev, "Failed to set DSP divider\n"); + return ret; + } + /* set DAC divider to 4 =3D> reg 0x03*/ + ret =3D regmap_write(tas5754m->regmap, TAS5754M_DAC_CLKDIV, 3); + if (ret) { + dev_err(component->dev, "Failed to set OSDACR divider\n"); + return ret; + } + /* set OSR divider to 1 */ + ret =3D regmap_write(tas5754m->regmap, TAS5754M_OSR_CLKDIV, 0); + if (ret) { + dev_err(component->dev, "Failed to set OSR divider\n"); + return ret; + } + /* set CP divider to 4 =3D> reg 0x03*/ + ret =3D regmap_write(tas5754m->regmap, TAS5754M_NCP_CLKDIV, 3); + if (ret) { + dev_err(component->dev, "Failed to set CP divider\n"); + return ret; + } + /* finally enable PLL */ + ret =3D regmap_update_bits(tas5754m->regmap, TAS5754M_PLL_EN, + TAS5754M_PLLE, 1); + if (ret) { + dev_err(component->dev, "Failed to enable PLL\n"); + return ret; + } + + return 0; +} + +static int tas5754m_set_dai_mode(struct snd_soc_dai *dai) +{ + struct snd_soc_component *component =3D dai->component; + struct tas5754m_priv *tas5754m =3D + snd_soc_component_get_drvdata(component); + int fmt =3D tas5754m->fmt; + + /* only I2S MASTER mode implemented */ + if ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) !=3D SND_SOC_DAIFMT_I2S) { + dev_err(component->dev, + "DAI format not supported (I2S master only)\n"); + return -EINVAL; + } + + /* TAS5754/6m do not support inverted clocks in MASTER mode */ + if ((fmt & SND_SOC_DAIFMT_CLOCK_MASK) !=3D SND_SOC_DAIFMT_NB_NF) { + dev_err(component->dev, "Inverted clocks not supported\n"); + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + regmap_update_bits(tas5754m->regmap, + TAS5754M_BCLK_LRCLK_CFG, + TAS5754M_LRKO | TAS5754M_BCKO, + TAS5754M_LRKO | TAS5754M_BCKO); + /* reset CLK dividers */ + regmap_update_bits(tas5754m->regmap, + TAS5754M_MASTER_MODE, + 0x00, + TAS5754M_RLRK | TAS5754M_RBCK); + /* ignore all clock error detection but MCLK */ + regmap_update_bits(tas5754m->regmap, + TAS5754M_ERROR_DETECT, + TAS5754M_IPLK | TAS5754M_DCAS | + TAS5754M_IDCM | TAS5754M_IDSK | + TAS5754M_IDBK | TAS5754M_IDFS, + TAS5754M_IPLK | TAS5754M_DCAS | + TAS5754M_IDCM | TAS5754M_IDSK | + TAS5754M_IDBK | TAS5754M_IDFS); + break; + case SND_SOC_DAIFMT_CBS_CFS: + case SND_SOC_DAIFMT_CBM_CFS: + default: + return -EINVAL; + } + + return 0; +} + +static int tas5754m_set_dividers_master(struct snd_soc_dai *dai, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_component *component =3D dai->component; + struct tas5754m_priv *tas5754m =3D + snd_soc_component_get_drvdata(component); + unsigned long bclk; + unsigned long mclk; + int bclk_div; + int lrclk_div; + int osr; + int ret; + + /* calculate divider settings based on mclk and sample_len */ + mclk =3D clk_get_rate(tas5754m->sclk); + bclk =3D tas5754m->sample_len * 2 * params_rate(params); + bclk_div =3D mclk / bclk; + lrclk_div =3D tas5754m->sample_len * 2; + osr =3D mclk / 4 / params_rate(params) / 16; + + /* stop LR / SCLK clocks */ + ret =3D regmap_update_bits(tas5754m->regmap, + TAS5754M_MASTER_MODE, 0, + TAS5754M_RLRK | TAS5754M_RBCK); + if (ret) { + dev_err(component->dev, "Failed to stop PLL\n"); + return ret; + } + /* set SCLK divider */ + ret =3D regmap_write(tas5754m->regmap, TAS5754M_MASTER_SCLKDIV, + bclk_div - 1); + if (ret) { + dev_err(component->dev, "Failed to set SCLK divider\n"); + return ret; + } + /* set LRCLK divider */ + ret =3D regmap_write(tas5754m->regmap, TAS5754M_MASTER_LRCLKDIV, + lrclk_div - 1); + if (ret) { + dev_err(component->dev, "Failed to set LRCLK divider\n"); + return ret; + } + ret =3D regmap_write(tas5754m->regmap, + TAS5754M_OSR_CLKDIV, osr - 1); + if (ret) { + dev_err(component->dev, "Failed to set OSR divider\n"); + return ret; + } + /* restart LR / SCLK clocks */ + ret =3D regmap_update_bits(tas5754m->regmap, + TAS5754M_MASTER_MODE, + TAS5754M_RLRK | TAS5754M_RBCK, + TAS5754M_RLRK | TAS5754M_RBCK); + if (ret) { + dev_err(component->dev, "Failed to restart PLL\n"); + return ret; + } + + return 0; +} + +static int tas5754m_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component =3D dai->component; + struct tas5754m_priv *tas5754m =3D + snd_soc_component_get_drvdata(component); + int alen; + int ret; + + switch (params_width(params)) { + case 16: + tas5754m->sample_len =3D 16; + alen =3D TAS5754M_ALEN_16; + break; + case 20: + tas5754m->sample_len =3D 32; + alen =3D TAS5754M_ALEN_20; + break; + case 24: + tas5754m->sample_len =3D 32; + alen =3D TAS5754M_ALEN_24; + break; + case 32: + tas5754m->sample_len =3D 32; + alen =3D TAS5754M_ALEN_32; + break; + default: + dev_err(component->dev, "Unsupported sample size: %d\n", + params_width(params)); + return -EINVAL; + } + ret =3D regmap_update_bits(tas5754m->regmap, TAS5754M_I2S_1, alen, alen); + if (ret) { + dev_err(component->dev, + "Cannot set sample size: %d\n", ret); + return ret; + } + + ret =3D tas5754m_set_dai_mode(dai); + if (ret) { + dev_err(component->dev, + "DAI mode not supported: %d\n", ret); + return ret; + } + + ret =3D tas5754m_set_clock_tree_master(dai, params); + if (ret) + return ret; + + switch (params_rate(params)) { + case 44100: + case 48000: + ret =3D regmap_write(tas5754m->regmap, + TAS5754M_FS_SPEED_MODE, TAS5754M_FSSP_48KHZ); + break; + case 88200: + case 96000: + ret =3D regmap_write(tas5754m->regmap, + TAS5754M_FS_SPEED_MODE, TAS5754M_FSSP_96KHZ); + break; + case 176400: + case 192000: + ret =3D regmap_write(tas5754m->regmap, + TAS5754M_FS_SPEED_MODE, TAS5754M_FSSP_192KHZ); + break; + default: + dev_err(component->dev, "Sample rate not supported: %d\n", + params_rate(params)); + return -EINVAL; + } + if (ret) { + dev_err(component->dev, "Failed to config PLL\n"); + return ret; + } + + ret =3D tas5754m_set_dividers_master(dai, params); + if (ret) + return ret; + + return 0; +} + +static int tas5754m_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_component *component =3D dai->component; + struct tas5754m_priv *tas5754m =3D + snd_soc_component_get_drvdata(component); + + tas5754m->fmt =3D fmt; + + return 0; +} + + +static const struct snd_soc_component_driver tas5754m_soc_component =3D { + .set_bias_level =3D tas5754m_set_bias_level, + .idle_bias_on =3D true, + .controls =3D tas5754m_controls, + .num_controls =3D ARRAY_SIZE(tas5754m_controls), +}; + +static int tas5754m_mute(struct snd_soc_dai *dai, int mute, int stream) +{ + struct snd_soc_component *component =3D dai->component; + + if (mute) { + snd_soc_component_write(component, TAS5754M_MUTE, 0x11); + } else { + /* wait for stable operation before unmute */ + usleep_range(1000, 2000); + snd_soc_component_write(component, TAS5754M_MUTE, 0x00); + } + return 0; +} + +static const struct snd_soc_dai_ops tas5754m_dai_ops =3D { + .mute_stream =3D tas5754m_mute, + .hw_params =3D tas5754m_hw_params, + .set_fmt =3D tas5754m_set_fmt, +}; + +static struct snd_soc_dai_driver tas5754m_dai =3D { + .name =3D "tas5754m-amplifier", + .playback =3D { + .stream_name =3D "Playback", + .channels_min =3D 2, + .channels_max =3D 2, + .rates =3D TAS5754M_RATES, + .formats =3D TAS5754M_FORMATS, + }, + .ops =3D &tas5754m_dai_ops, +}; + +static int tas5754m_probe(struct device *dev, struct regmap *regmap) +{ + struct tas5754m_priv *tas5754m; + int ret; + + tas5754m =3D devm_kzalloc(dev, sizeof(struct tas5754m_priv), GFP_KERNEL); + if (!tas5754m) + return -ENOMEM; + + dev_set_drvdata(dev, tas5754m); + tas5754m->regmap =3D regmap; + + ret =3D regmap_write(regmap, TAS5754M_RESET, + TAS5754M_RSTR | TAS5754M_RSTM); + if (ret) { + dev_err(dev, "Failed to initialize TAS5754M: %d\n", ret); + goto err; + } + + tas5754m->sclk =3D devm_clk_get(dev, NULL); + if (PTR_ERR(tas5754m->sclk) =3D=3D -EPROBE_DEFER) { + ret =3D -EPROBE_DEFER; + goto err; + } + if (!IS_ERR(tas5754m->sclk)) { + ret =3D clk_prepare_enable(tas5754m->sclk); + if (ret) { + dev_err(dev, "Failed to enable SCLK: %d\n", ret); + goto err; + } + } + + ret =3D devm_snd_soc_register_component(dev, + &tas5754m_soc_component, &tas5754m_dai, 1); + if (ret) { + dev_err(dev, "Failed to register CODEC: %d\n", ret); + goto err; + } + + return 0; + +err: + return ret; + +} + +static int tas5754m_i2c_probe(struct i2c_client *i2c, const struct i2c_dev= ice_id *id) +{ + struct regmap *regmap; + struct regmap_config config =3D tas5754m_regmap; + + /* enable auto-increment mode */ + config.read_flag_mask =3D 0x80; + config.write_flag_mask =3D 0x80; + + regmap =3D devm_regmap_init_i2c(i2c, &config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + return tas5754m_probe(&i2c->dev, regmap); +} + +static int tas5754m_remove(struct device *dev) +{ + snd_soc_unregister_component(dev); + + return 0; +} + +static int tas5754m_i2c_remove(struct i2c_client *i2c) +{ + tas5754m_remove(&i2c->dev); + + return 0; +} + +static const struct i2c_device_id tas5754m_i2c_id[] =3D { + { "tas5754m", }, + { "tas5756m", }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tas5754m_i2c_id); + +#ifdef CONFIG_OF +static const struct of_device_id tas5754m_of_match[] =3D { + { .compatible =3D "ti,tas5754m", }, + { .compatible =3D "ti,tas5756m", }, + { } +}; +MODULE_DEVICE_TABLE(of, tas5754m_of_match); +#endif + +static struct i2c_driver tas5754m_i2c_driver =3D { + .probe =3D tas5754m_i2c_probe, + .remove =3D tas5754m_i2c_remove, + .id_table =3D tas5754m_i2c_id, + .driver =3D { + .name =3D "tas5754m", + .of_match_table =3D of_match_ptr(tas5754m_of_match), + }, +}; + +module_i2c_driver(tas5754m_i2c_driver); + +MODULE_AUTHOR("Joerg Schambacher "); +MODULE_DESCRIPTION("TAS5754M Audio Amplifier Driver - Master mode only"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas5754m.h b/sound/soc/codecs/tas5754m.h new file mode 100644 index 000000000000..c6e26dba169f --- /dev/null +++ b/sound/soc/codecs/tas5754m.h @@ -0,0 +1,260 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Driver for the TAS575xM DAC+amplifier combo devices + * + * Author: (copied from pcm512x.h) + * Mark Brown + * Copyright 2014 Linaro Ltd + * + * Register names adapted and non available + * register definitions removed according + + to TAS5754M specification + * Joerg Schambacher + */ + +#ifndef _SND_SOC_TAS5754M +#define _SND_SOC_TAS5754M + +#include +#include + +#define TAS5754M_VIRT_BASE 0x000 +#define TAS5754M_PAGE_LEN 0x80 +#define TAS5754M_PAGE_BASE(n) (TAS5754M_VIRT_BASE + (TAS5754M_PAGE_LEN * = n)) + +#define TAS5754M_PAGE 0 + +#define TAS5754M_RESET (TAS5754M_PAGE_BASE(0) + 1) +#define TAS5754M_POWER (TAS5754M_PAGE_BASE(0) + 2) +#define TAS5754M_MUTE (TAS5754M_PAGE_BASE(0) + 3) +#define TAS5754M_PLL_EN (TAS5754M_PAGE_BASE(0) + 4) +#define TAS5754M_DSP (TAS5754M_PAGE_BASE(0) + 7) +#define TAS5754M_GPIO_EN (TAS5754M_PAGE_BASE(0) + 8) +#define TAS5754M_BCLK_LRCLK_CFG (TAS5754M_PAGE_BASE(0) + 9) +#define TAS5754M_DSP_GPIO_INPUT (TAS5754M_PAGE_BASE(0) + 10) +#define TAS5754M_MASTER_MODE (TAS5754M_PAGE_BASE(0) + 12) +#define TAS5754M_PLL_REF (TAS5754M_PAGE_BASE(0) + 13) +#define TAS5754M_DAC_REF (TAS5754M_PAGE_BASE(0) + 14) +#define TAS5754M_GPIO_PLLIN (TAS5754M_PAGE_BASE(0) + 18) +#define TAS5754M_SYNCHRONIZE (TAS5754M_PAGE_BASE(0) + 19) +#define TAS5754M_PLL_COEFF_P (TAS5754M_PAGE_BASE(0) + 20) +#define TAS5754M_PLL_COEFF_J (TAS5754M_PAGE_BASE(0) + 21) +#define TAS5754M_PLL_COEFF_DH (TAS5754M_PAGE_BASE(0) + 22) +#define TAS5754M_PLL_COEFF_DL (TAS5754M_PAGE_BASE(0) + 23) +#define TAS5754M_PLL_COEFF_R (TAS5754M_PAGE_BASE(0) + 24) +#define TAS5754M_DSP_CLKDIV (TAS5754M_PAGE_BASE(0) + 27) +#define TAS5754M_DAC_CLKDIV (TAS5754M_PAGE_BASE(0) + 28) +#define TAS5754M_NCP_CLKDIV (TAS5754M_PAGE_BASE(0) + 29) +#define TAS5754M_OSR_CLKDIV (TAS5754M_PAGE_BASE(0) + 30) +#define TAS5754M_MASTER_SCLKDIV (TAS5754M_PAGE_BASE(0) + 32) +#define TAS5754M_MASTER_LRCLKDIV (TAS5754M_PAGE_BASE(0) + 33) +#define TAS5754M_FS_SPEED_MODE (TAS5754M_PAGE_BASE(0) + 34) +#define TAS5754M_IDAC_1 (TAS5754M_PAGE_BASE(0) + 35) +#define TAS5754M_IDAC_2 (TAS5754M_PAGE_BASE(0) + 36) +#define TAS5754M_ERROR_DETECT (TAS5754M_PAGE_BASE(0) + 37) +#define TAS5754M_I2S_1 (TAS5754M_PAGE_BASE(0) + 40) +#define TAS5754M_I2S_2 (TAS5754M_PAGE_BASE(0) + 41) +#define TAS5754M_DAC_ROUTING (TAS5754M_PAGE_BASE(0) + 42) +#define TAS5754M_DSP_PROGRAM (TAS5754M_PAGE_BASE(0) + 43) +#define TAS5754M_CLKDET (TAS5754M_PAGE_BASE(0) + 44) +#define TAS5754M_AUTO_MUTE (TAS5754M_PAGE_BASE(0) + 59) +#define TAS5754M_DIGITAL_VOLUME_1 (TAS5754M_PAGE_BASE(0) + 60) +#define TAS5754M_DIGITAL_VOLUME_2 (TAS5754M_PAGE_BASE(0) + 61) +#define TAS5754M_DIGITAL_VOLUME_3 (TAS5754M_PAGE_BASE(0) + 62) +#define TAS5754M_DIGITAL_MUTE_1 (TAS5754M_PAGE_BASE(0) + 63) +#define TAS5754M_DIGITAL_MUTE_2 (TAS5754M_PAGE_BASE(0) + 64) +#define TAS5754M_DIGITAL_MUTE_3 (TAS5754M_PAGE_BASE(0) + 65) +#define TAS5754M_GPIO_OUTPUT_1 (TAS5754M_PAGE_BASE(0) + 82) +#define TAS5754M_GPIO_OUTPUT_0 (TAS5754M_PAGE_BASE(0) + 83) +#define TAS5754M_GPIO_OUTPUT_2 (TAS5754M_PAGE_BASE(0) + 85) +#define TAS5754M_GPIO_CONTROL_1 (TAS5754M_PAGE_BASE(0) + 86) +#define TAS5754M_GPIO_CONTROL_2 (TAS5754M_PAGE_BASE(0) + 87) +#define TAS5754M_OVERFLOW (TAS5754M_PAGE_BASE(0) + 90) +#define TAS5754M_RATE_DET_1 (TAS5754M_PAGE_BASE(0) + 91) +#define TAS5754M_RATE_DET_2 (TAS5754M_PAGE_BASE(0) + 92) +#define TAS5754M_RATE_DET_3 (TAS5754M_PAGE_BASE(0) + 93) +#define TAS5754M_RATE_DET_4 (TAS5754M_PAGE_BASE(0) + 94) +#define TAS5754M_CLOCK_STATUS (TAS5754M_PAGE_BASE(0) + 95) +#define TAS5754M_ANALOG_MUTE_DET (TAS5754M_PAGE_BASE(0) + 108) +#define TAS5754M_FS_MODE_MON (TAS5754M_PAGE_BASE(0) + 115) +#define TAS5754M_GPIN (TAS5754M_PAGE_BASE(0) + 119) +#define TAS5754M_DIGITAL_MUTE_DET (TAS5754M_PAGE_BASE(0) + 120) + +#define TAS5754M_OUTPUT_AMPLITUDE (TAS5754M_PAGE_BASE(1) + 1) +#define TAS5754M_ANALOG_GAIN_CTRL (TAS5754M_PAGE_BASE(1) + 2) +#define TAS5754M_UNDERVOLTAGE_PROT (TAS5754M_PAGE_BASE(1) + 5) +#define TAS5754M_ANALOG_MUTE_CTRL (TAS5754M_PAGE_BASE(1) + 6) +#define TAS5754M_ANALOG_GAIN_BOOST (TAS5754M_PAGE_BASE(1) + 7) +#define TAS5754M_VCOM_CTRL_1 (TAS5754M_PAGE_BASE(1) + 8) +#define TAS5754M_VCOM_CTRL_2 (TAS5754M_PAGE_BASE(1) + 9) + +#define TAS5754M_CRAM_CTRL (TAS5754M_PAGE_BASE(44) + 1) + +#define TAS5754M_FLEX_A (TAS5754M_PAGE_BASE(253) + 63) +#define TAS5754M_FLEX_B (TAS5754M_PAGE_BASE(253) + 64) + +#define TAS5754M_MAX_REGISTER (TAS5754M_PAGE_BASE(253) + 64) + +/* Page 0, Register 1 - reset */ +#define TAS5754M_RSTR (1 << 0) +#define TAS5754M_RSTM (1 << 4) + +/* Page 0, Register 2 - power */ +#define TAS5754M_RQPD (1 << 0) +#define TAS5754M_RQPD_SHIFT 0 +#define TAS5754M_RQST (1 << 4) +#define TAS5754M_RQST_SHIFT 4 + +/* Page 0, Register 3 - mute */ +#define TAS5754M_RQMR (1 << 0) +#define TAS5754M_RQMR_SHIFT 0 +#define TAS5754M_RQML (1 << 4) +#define TAS5754M_RQML_SHIFT 4 + +/* Page 0, Register 4 - PLL */ +#define TAS5754M_PLLE (1 << 0) +#define TAS5754M_PLLE_SHIFT 0 +#define TAS5754M_PLCK (1 << 4) +#define TAS5754M_PLCK_SHIFT 4 + +/* Page 0, Register 7 - DSP */ +#define TAS5754M_SDSL (1 << 0) +#define TAS5754M_SDSL_SHIFT 0 +#define TAS5754M_DEMP (1 << 4) +#define TAS5754M_DEMP_SHIFT 4 + +/* Page 0, Register 8 - GPIO output enable */ +#define TAS5754M_G1OE (1 << 0) +#define TAS5754M_G2OE (1 << 1) +#define TAS5754M_G3OE (1 << 2) +#define TAS5754M_G4OE (1 << 3) +#define TAS5754M_G5OE (1 << 4) +#define TAS5754M_G6OE (1 << 5) + +/* Page 0, Register 9 - BCK, LRCLK configuration */ +#define TAS5754M_LRKO (1 << 0) +#define TAS5754M_LRKO_SHIFT 0 +#define TAS5754M_BCKO (1 << 4) +#define TAS5754M_BCKO_SHIFT 4 +#define TAS5754M_BCKP (1 << 5) +#define TAS5754M_BCKP_SHIFT 5 + +/* Page 0, Register 12 - Master mode BCK, LRCLK reset */ +#define TAS5754M_RLRK (1 << 0) +#define TAS5754M_RLRK_SHIFT 0 +#define TAS5754M_RBCK (1 << 1) +#define TAS5754M_RBCK_SHIFT 1 + +/* Page 0, Register 13 - PLL reference */ +#define TAS5754M_SREF (7 << 4) +#define TAS5754M_SREF_SHIFT 4 +#define TAS5754M_SREF_SCK (0 << 4) +#define TAS5754M_SREF_BCK (1 << 4) +#define TAS5754M_SREF_GPIO (3 << 4) + +/* Page 0, Register 14 - DAC reference */ +#define TAS5754M_SDAC (7 << 4) +#define TAS5754M_SDAC_SHIFT 4 +#define TAS5754M_SDAC_MCK (0 << 4) +#define TAS5754M_SDAC_PLL (1 << 4) +#define TAS5754M_SDAC_SCK (3 << 4) +#define TAS5754M_SDAC_BCK (4 << 4) +#define TAS5754M_SDAC_GPIO (5 << 4) + +/* Page 0, Register 16, 18 - GPIO source for DAC, PLL */ +#define TAS5754M_GREF (7 << 0) +#define TAS5754M_GREF_SHIFT 0 +#define TAS5754M_GREF_GPIO1 (0 << 0) +#define TAS5754M_GREF_GPIO2 (1 << 0) +#define TAS5754M_GREF_GPIO3 (2 << 0) +#define TAS5754M_GREF_GPIO4 (3 << 0) +#define TAS5754M_GREF_GPIO5 (4 << 0) +#define TAS5754M_GREF_GPIO6 (5 << 0) + +/* Page 0, Register 19 - synchronize */ +#define TAS5754M_RQSY (1 << 0) +#define TAS5754M_RQSY_RESUME (0 << 0) +#define TAS5754M_RQSY_HALT (1 << 0) + +/* Page 0, Register 34 - fs speed mode */ +#define TAS5754M_FSSP (3 << 0) +#define TAS5754M_FSSP_SHIFT 0 +#define TAS5754M_FSSP_48KHZ (0 << 0) +#define TAS5754M_FSSP_96KHZ (1 << 0) +#define TAS5754M_FSSP_192KHZ (2 << 0) +#define TAS5754M_FSSP_384KHZ (3 << 0) + +/* Page 0, Register 37 - Error detection */ +#define TAS5754M_IPLK (1 << 0) +#define TAS5754M_DCAS (1 << 1) +#define TAS5754M_IDCM (1 << 2) +#define TAS5754M_IDCH (1 << 3) +#define TAS5754M_IDSK (1 << 4) +#define TAS5754M_IDBK (1 << 5) +#define TAS5754M_IDFS (1 << 6) + +/* Page 0, Register 40 - I2S configuration */ +#define TAS5754M_ALEN (3 << 0) +#define TAS5754M_ALEN_SHIFT 0 +#define TAS5754M_ALEN_16 (0 << 0) +#define TAS5754M_ALEN_20 (1 << 0) +#define TAS5754M_ALEN_24 (2 << 0) +#define TAS5754M_ALEN_32 (3 << 0) +#define TAS5754M_AFMT (3 << 4) +#define TAS5754M_AFMT_SHIFT 4 +#define TAS5754M_AFMT_I2S (0 << 4) +#define TAS5754M_AFMT_DSP (1 << 4) +#define TAS5754M_AFMT_RTJ (2 << 4) +#define TAS5754M_AFMT_LTJ (3 << 4) + +/* Page 0, Register 42 - DAC routing */ +#define TAS5754M_AUPR_SHIFT 0 +#define TAS5754M_AUPL_SHIFT 4 + +/* Page 0, Register 59 - auto mute */ +#define TAS5754M_ATMR_SHIFT 0 +#define TAS5754M_ATML_SHIFT 4 + +/* Page 0, Register 63 - ramp rates */ +#define TAS5754M_VNDF_SHIFT 6 +#define TAS5754M_VNDS_SHIFT 4 +#define TAS5754M_VNUF_SHIFT 2 +#define TAS5754M_VNUS_SHIFT 0 + +/* Page 0, Register 64 - emergency ramp rates */ +#define TAS5754M_VEDF_SHIFT 6 +#define TAS5754M_VEDS_SHIFT 4 + +/* Page 0, Register 65 - Digital mute enables */ +#define TAS5754M_ACTL_SHIFT 2 +#define TAS5754M_AMLE_SHIFT 1 +#define TAS5754M_AMRE_SHIFT 0 + +/* Page 0, Register 80-85, GPIO output selection */ +#define TAS5754M_GxSL (31 << 0) +#define TAS5754M_GxSL_SHIFT 0 +#define TAS5754M_GxSL_OFF (0 << 0) +#define TAS5754M_GxSL_DSP (1 << 0) +#define TAS5754M_GxSL_REG (2 << 0) +#define TAS5754M_GxSL_AMUTB (3 << 0) +#define TAS5754M_GxSL_AMUTL (4 << 0) +#define TAS5754M_GxSL_AMUTR (5 << 0) +#define TAS5754M_GxSL_CLKI (6 << 0) +#define TAS5754M_GxSL_SDOUT (7 << 0) +#define TAS5754M_GxSL_ANMUL (8 << 0) +#define TAS5754M_GxSL_ANMUR (9 << 0) +#define TAS5754M_GxSL_PLLLK (10 << 0) +#define TAS5754M_GxSL_CPCLK (11 << 0) +#define TAS5754M_GxSL_UV0_7 (14 << 0) +#define TAS5754M_GxSL_UV0_3 (15 << 0) +#define TAS5754M_GxSL_PLLCK (16 << 0) + +/* Page 1, Register 2 - analog volume control */ +#define TAS5754M_RAGN_SHIFT 0 +#define TAS5754M_LAGN_SHIFT 4 + +/* Page 1, Register 7 - analog boost control */ +#define TAS5754M_AGBR_SHIFT 0 +#define TAS5754M_AGBL_SHIFT 4 + +#endif -- = 2.25.1 --===============3083884271299997605==--