* [RFC PATCH v2 0/4] Add driver for Renesas RZ/G2L CRU module
@ 2022-01-21 1:05 Lad Prabhakar
2022-01-21 1:05 ` [RFC PATCH v2 1/4] media: dt-bindings: media: Document RZ/G2L CSI-2 block Lad Prabhakar
` (3 more replies)
0 siblings, 4 replies; 17+ messages in thread
From: Lad Prabhakar @ 2022-01-21 1:05 UTC (permalink / raw)
To: Niklas Söderlund, Jacopo Mondi, Philipp Zabel,
Mauro Carvalho Chehab, Rob Herring, Laurent Pinchart,
Sakari Ailus, Hans Verkuil
Cc: Geert Uytterhoeven, linux-media, linux-renesas-soc, devicetree,
linux-kernel, Prabhakar, Biju Das, Lad Prabhakar
Hi All,
This patch series aims to add driver support to CRU module found
on Renesas RZ/G2L SoC.
The Camera Data Receiving Unit (CRU) consists of a MIPI CSI-2
block and an Image Processing block. The Image Processing block
can receive video data received from the external Digital Parallel
Interface or MIPI CSI-2 block, and perform appropriate image
processing for each.
More details:
* https://renesas.info/wiki/File:CRU.png
* https://www.renesas.com/document/mah/
rzg2l-group-rzg2lc-group-users-manual-hardware-0?language=en&r=1467981
Currently the driver has been tested using yavta and Gstreamer
on RZ/G2L SMARC EVK using the ov5645 sensor on CSI2 interface
only.
Patches are dependent on millstream series [0] and subdev active state series [1].
[0] https://lore.kernel.org/linux-media/20211130141536.891878-1-tomi.valkeinen@ideasonboard.com/T/#t
[1] https://lore.kernel.org/linux-media/20211217135022.364954-1-tomi.valkeinen@ideasonboard.com/T/#t
v1: https://patchwork.kernel.org/project/linux-renesas-soc/cover/
20211207012351.15754-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
Cheers,
Prabhakar
Lad Prabhakar (4):
media: dt-bindings: media: Document RZ/G2L CSI-2 block
media: dt-bindings: media: Document RZ/G2L CRU
media: platform: Add CRU driver for RZ/G2L SoC
media: platform: Add Renesas RZ/G2L MIPI CSI-2 receiver driver
.../bindings/media/renesas,rzg2l-cru.yaml | 152 +++
.../bindings/media/renesas,rzg2l-csi2.yaml | 151 +++
drivers/media/platform/Kconfig | 1 +
drivers/media/platform/Makefile | 2 +
.../media/platform/renesas/rzg2l-cru/Kconfig | 28 +
.../media/platform/renesas/rzg2l-cru/Makefile | 5 +
.../platform/renesas/rzg2l-cru/rzg2l-core.c | 432 ++++++++
.../platform/renesas/rzg2l-cru/rzg2l-cru.h | 155 +++
.../platform/renesas/rzg2l-cru/rzg2l-csi2.c | 928 ++++++++++++++++++
.../platform/renesas/rzg2l-cru/rzg2l-dma.c | 722 ++++++++++++++
.../platform/renesas/rzg2l-cru/rzg2l-v4l2.c | 360 +++++++
11 files changed, 2936 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
create mode 100644 drivers/media/platform/renesas/rzg2l-cru/Kconfig
create mode 100644 drivers/media/platform/renesas/rzg2l-cru/Makefile
create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c
create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h
create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c
create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c
create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c
--
2.17.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* [RFC PATCH v2 1/4] media: dt-bindings: media: Document RZ/G2L CSI-2 block
2022-01-21 1:05 [RFC PATCH v2 0/4] Add driver for Renesas RZ/G2L CRU module Lad Prabhakar
@ 2022-01-21 1:05 ` Lad Prabhakar
2022-01-21 9:26 ` Geert Uytterhoeven
2022-02-15 13:01 ` Jacopo Mondi
2022-01-21 1:05 ` [RFC PATCH v2 2/4] media: dt-bindings: media: Document RZ/G2L CRU Lad Prabhakar
` (2 subsequent siblings)
3 siblings, 2 replies; 17+ messages in thread
From: Lad Prabhakar @ 2022-01-21 1:05 UTC (permalink / raw)
To: Niklas Söderlund, Jacopo Mondi, Philipp Zabel,
Mauro Carvalho Chehab, Rob Herring, Laurent Pinchart,
Sakari Ailus, Hans Verkuil
Cc: Geert Uytterhoeven, linux-media, linux-renesas-soc, devicetree,
linux-kernel, Prabhakar, Biju Das, Lad Prabhakar
Document the CSI-2 block which is part of CRU found in Renesas
RZ/G2L SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
Hi Geert/All,
vclk and pclk clocks are shared with CRU both CSI and CRU driver are using
pm_runtime. pclk clock is necessary for register access where as vclk clock
is only used for calculations. So would you suggest passing vclk as part of
clocks (as currently implemented) or pass the vclk clock rate as a dt property.
Cheers,
Prabhakar
v1->v2
* New patch
---
.../bindings/media/renesas,rzg2l-csi2.yaml | 151 ++++++++++++++++++
1 file changed, 151 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
new file mode 100644
index 000000000000..bf907768a157
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,rzg2l-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L MIPI CSI-2 receiver
+
+maintainers:
+ - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+ The RZ/G2L CSI-2 receiver device provides MIPI CSI-2 capabilities for the
+ Renesas RZ/G2L family of devices. MIPI CSI-2 is part of the CRU block which
+ is used in conjunction with the Image Processing module, which provides the
+ video capture capabilities.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,r9a07g044-csi2 # RZ/G2{L,LC}
+ - const: renesas,rzg2l-csi2
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ items:
+ - const: csi2_link
+
+ clocks:
+ items:
+ - description: Internal clock for connecting CRU and MIPI
+ - description: CRU Main clock
+ - description: CPU Register access clock
+
+ clock-names:
+ items:
+ - const: sysclk
+ - const: vclk
+ - const: pclk
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ items:
+ - description: CRU_CMN_RSTB reset terminal
+
+ reset-names:
+ items:
+ - const: cmn-rstb
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port node, single endpoint describing the CSI-2 transmitter.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+ items:
+ maximum: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Output port node, Image Processing block connected to the CSI-2 receiver.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+ - resets
+ - reset-names
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r9a07g044-cpg.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ csi20: csi2@10830400 {
+ compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2";
+ reg = <0x10830400 0xfc00>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>,
+ <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
+ <&cpg CPG_MOD R9A07G044_CRU_PCLK>;
+ clock-names = "sysclk", "vclk", "pclk";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_CRU_CMN_RSTB>;
+ reset-names = "cmn-rstb";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi2_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&ov5645_ep>;
+ };
+ };
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ csi2cru: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&crucsi2>;
+ };
+ };
+ };
+ };
--
2.17.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [RFC PATCH v2 2/4] media: dt-bindings: media: Document RZ/G2L CRU
2022-01-21 1:05 [RFC PATCH v2 0/4] Add driver for Renesas RZ/G2L CRU module Lad Prabhakar
2022-01-21 1:05 ` [RFC PATCH v2 1/4] media: dt-bindings: media: Document RZ/G2L CSI-2 block Lad Prabhakar
@ 2022-01-21 1:05 ` Lad Prabhakar
2022-02-07 22:39 ` Rob Herring
2022-02-15 13:06 ` Jacopo Mondi
2022-01-21 1:05 ` [RFC PATCH v2 3/4] media: platform: Add CRU driver for RZ/G2L SoC Lad Prabhakar
2022-01-21 1:05 ` [RFC PATCH v2 4/4] media: platform: Add Renesas RZ/G2L MIPI CSI-2 receiver driver Lad Prabhakar
3 siblings, 2 replies; 17+ messages in thread
From: Lad Prabhakar @ 2022-01-21 1:05 UTC (permalink / raw)
To: Niklas Söderlund, Jacopo Mondi, Philipp Zabel,
Mauro Carvalho Chehab, Rob Herring, Laurent Pinchart,
Sakari Ailus, Hans Verkuil
Cc: Geert Uytterhoeven, linux-media, linux-renesas-soc, devicetree,
linux-kernel, Prabhakar, Biju Das, Lad Prabhakar
Document the CRU block found on Renesas RZ/G2L SoC's.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2
* Dropped CSI
---
.../bindings/media/renesas,rzg2l-cru.yaml | 152 ++++++++++++++++++
1 file changed, 152 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
new file mode 100644
index 000000000000..a03fc6ef0117
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L Camera Data Receiving Unit (CRU)
+
+maintainers:
+ - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+ The RZ/G2L Camera Data Receiving Unit (CRU) device provides video input
+ capabilities for the Renesas RZ/G2L family of devices.
+
+ Depending on the instance the Image Processing input is connected to
+ external SoC pins or to a CSI-2 receiver.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,r9a07g044-cru # RZ/G2{L,LC}
+ - const: renesas,rzg2l-cru
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 3
+
+ interrupt-names:
+ items:
+ - const: image_conv
+ - const: image_conv_err
+ - const: axi_mst_err
+
+ clocks:
+ items:
+ - description: CRU Main clock
+ - description: CPU Register access clock
+ - description: CRU image transfer clock
+
+ clock-names:
+ items:
+ - const: vclk
+ - const: pclk
+ - const: aclk
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ items:
+ - description: CRU_PRESETN reset terminal
+ - description: CRU_ARESETN reset terminal
+
+ reset-names:
+ items:
+ - const: presetn
+ - const: aresetn
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port node, single endpoint describing a parallel input source.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ hsync-active: true
+ vsync-active: true
+ bus-width: true
+ data-shift: true
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Output port node, describing the RZ/G2L Image Processing module
+ connected the CSI-2 receiver
+
+ properties:
+ endpoint@0:
+ $ref: /schemas/graph.yaml#/properties/endpoint
+ description: Endpoint connected to CSI2.
+
+ anyOf:
+ - required:
+ - endpoint@0
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ # Device node example with CSI-2
+ - |
+ #include <dt-bindings/clock/r9a07g044-cpg.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ cru: video@10830000 {
+ compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";
+ reg = <0x10830000 0x400>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
+ clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
+ <&cpg CPG_MOD R9A07G044_CRU_PCLK>,
+ <&cpg CPG_MOD R9A07G044_CRU_ACLK>;
+ clock-names = "vclk", "pclk", "aclk";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_CRU_PRESETN>,
+ <&cpg R9A07G044_CRU_ARESETN>;
+ reset-names = "presetn", "aresetn";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ crucsi2: endpoint@0 {
+ reg = <0>;
+ remote-endpoint= <&csi2cru>;
+ };
+ };
+ };
+ };
--
2.17.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [RFC PATCH v2 3/4] media: platform: Add CRU driver for RZ/G2L SoC
2022-01-21 1:05 [RFC PATCH v2 0/4] Add driver for Renesas RZ/G2L CRU module Lad Prabhakar
2022-01-21 1:05 ` [RFC PATCH v2 1/4] media: dt-bindings: media: Document RZ/G2L CSI-2 block Lad Prabhakar
2022-01-21 1:05 ` [RFC PATCH v2 2/4] media: dt-bindings: media: Document RZ/G2L CRU Lad Prabhakar
@ 2022-01-21 1:05 ` Lad Prabhakar
2022-02-15 14:40 ` Jacopo Mondi
2022-01-21 1:05 ` [RFC PATCH v2 4/4] media: platform: Add Renesas RZ/G2L MIPI CSI-2 receiver driver Lad Prabhakar
3 siblings, 1 reply; 17+ messages in thread
From: Lad Prabhakar @ 2022-01-21 1:05 UTC (permalink / raw)
To: Niklas Söderlund, Jacopo Mondi, Philipp Zabel,
Mauro Carvalho Chehab, Rob Herring, Laurent Pinchart,
Sakari Ailus, Hans Verkuil
Cc: Geert Uytterhoeven, linux-media, linux-renesas-soc, devicetree,
linux-kernel, Prabhakar, Biju Das, Lad Prabhakar
Add v4l driver for Renesas RZ/G2L Camera data Receiving Unit.
Based on a patch in the BSP by Hien Huynh
<hien.huynh.px@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2
* Dropped group
* Dropped CSI subdev and implemented as new driver
* Dropped "mc_" from function names
* Moved the driver to renesas folder
---
drivers/media/platform/Kconfig | 1 +
drivers/media/platform/Makefile | 2 +
.../media/platform/renesas/rzg2l-cru/Kconfig | 15 +
.../media/platform/renesas/rzg2l-cru/Makefile | 4 +
.../platform/renesas/rzg2l-cru/rzg2l-core.c | 432 +++++++++++
.../platform/renesas/rzg2l-cru/rzg2l-cru.h | 155 ++++
.../platform/renesas/rzg2l-cru/rzg2l-dma.c | 722 ++++++++++++++++++
.../platform/renesas/rzg2l-cru/rzg2l-v4l2.c | 360 +++++++++
8 files changed, 1691 insertions(+)
create mode 100644 drivers/media/platform/renesas/rzg2l-cru/Kconfig
create mode 100644 drivers/media/platform/renesas/rzg2l-cru/Makefile
create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c
create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h
create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c
create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index cf4adc64c953..4251c5686c2a 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -169,6 +169,7 @@ source "drivers/media/platform/exynos4-is/Kconfig"
source "drivers/media/platform/am437x/Kconfig"
source "drivers/media/platform/xilinx/Kconfig"
source "drivers/media/platform/rcar-vin/Kconfig"
+source "drivers/media/platform/renesas/rzg2l-cru/Kconfig"
source "drivers/media/platform/atmel/Kconfig"
source "drivers/media/platform/sunxi/Kconfig"
diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
index a148553babfc..021d30a2c66c 100644
--- a/drivers/media/platform/Makefile
+++ b/drivers/media/platform/Makefile
@@ -66,6 +66,8 @@ obj-$(CONFIG_VIDEO_XILINX) += xilinx/
obj-$(CONFIG_VIDEO_RCAR_ISP) += rcar-isp.o
obj-$(CONFIG_VIDEO_RCAR_VIN) += rcar-vin/
+obj-$(CONFIG_VIDEO_RZG2L_CRU) += renesas/rzg2l-cru/
+
obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel/
obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel/
obj-$(CONFIG_VIDEO_ATMEL_XISC) += atmel/
diff --git a/drivers/media/platform/renesas/rzg2l-cru/Kconfig b/drivers/media/platform/renesas/rzg2l-cru/Kconfig
new file mode 100644
index 000000000000..310baa4d4c14
--- /dev/null
+++ b/drivers/media/platform/renesas/rzg2l-cru/Kconfig
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config VIDEO_RZG2L_CRU
+ tristate "RZ/G2L Camera Receiving Unit (CRU) Driver"
+ depends on VIDEO_V4L2 && OF
+ depends on ARCH_RENESAS || COMPILE_TEST
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select VIDEOBUF2_DMA_CONTIG
+ select V4L2_FWNODE
+ help
+ Support for Renesas RZ/G2L Camera Receiving Unit (CRU) driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rzg2l-cru.
diff --git a/drivers/media/platform/renesas/rzg2l-cru/Makefile b/drivers/media/platform/renesas/rzg2l-cru/Makefile
new file mode 100644
index 000000000000..8c307075f131
--- /dev/null
+++ b/drivers/media/platform/renesas/rzg2l-cru/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+rzg2l-cru-objs = rzg2l-core.o rzg2l-dma.o rzg2l-v4l2.o
+
+obj-$(CONFIG_VIDEO_RZG2L_CRU) += rzg2l-cru.o
diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c
new file mode 100644
index 000000000000..881bedaaff8f
--- /dev/null
+++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c
@@ -0,0 +1,432 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Renesas RZ/G2L CRU
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ *
+ * Based on Renesas R-Car VIN
+ * Copyright (C) 2011-2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Cogent Embedded, Inc., <source@cogentembedded.com>
+ * Copyright (C) 2008 Magnus Damm
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+
+#include <media/v4l2-async.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-mc.h>
+
+#include "rzg2l-cru.h"
+
+#define v4l2_dev_to_cru(d) container_of(d, struct rzg2l_cru_dev, v4l2_dev)
+
+static int rzg2l_cru_csi2_link_notify(struct media_link *link, u32 flags,
+ unsigned int notification)
+{
+ struct media_entity *entity;
+ struct rzg2l_cru_dev *cru;
+ struct video_device *vdev;
+ struct media_pad *csi_pad;
+ struct v4l2_subdev *sd;
+ int ret;
+
+ ret = v4l2_pipeline_link_notify(link, flags, notification);
+ if (ret)
+ return ret;
+
+ /* Only care about link enablement for CRU nodes. */
+ if (!(flags & MEDIA_LNK_FL_ENABLED) ||
+ !is_media_entity_v4l2_video_device(link->sink->entity))
+ return 0;
+
+ cru = container_of(link->graph_obj.mdev, struct rzg2l_cru_dev, mdev);
+ /*
+ * Don't allow link changes if any entity in the graph is
+ * streaming, modifying the CHSEL register fields can disrupt
+ * running streams.
+ */
+ media_device_for_each_entity(entity, &cru->mdev)
+ if (entity->pads->stream_count)
+ return -EBUSY;
+
+ mutex_lock(&cru->mdev_lock);
+ vdev = media_entity_to_video_device(link->sink->entity);
+
+ csi_pad = media_entity_remote_pad(&cru->vdev.entity.pads[0]);
+ if (csi_pad) {
+ ret = -EMLINK;
+ goto out;
+ }
+
+ sd = media_entity_to_v4l2_subdev(link->source->entity);
+ if (cru->csi.subdev == sd) {
+ cru->csi.channel = link->source->index - 1;
+ cru->is_csi = true;
+ } else {
+ ret = -ENODEV;
+ }
+
+out:
+ mutex_unlock(&cru->mdev_lock);
+
+ return ret;
+}
+
+static const struct media_device_ops rzg2l_cru_media_ops = {
+ .link_notify = rzg2l_cru_csi2_link_notify,
+};
+
+static void rzg2l_cru_put(struct rzg2l_cru_dev *cru)
+{
+ mutex_lock(&cru->mdev_lock);
+ cru->v4l2_dev.mdev = NULL;
+ mutex_unlock(&cru->mdev_lock);
+}
+
+/* -----------------------------------------------------------------------------
+ * Group async notifier
+ */
+
+static int rzg2l_cru_group_notify_complete(struct v4l2_async_notifier *notifier)
+{
+ struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev);
+ unsigned int i;
+ int ret;
+
+ ret = media_device_register(&cru->mdev);
+ if (ret)
+ return ret;
+
+ ret = v4l2_device_register_subdev_nodes(&cru->v4l2_dev);
+ if (ret) {
+ dev_err(cru->dev, "Failed to register subdev nodes\n");
+ return ret;
+ }
+
+ if (!video_is_registered(&cru->vdev)) {
+ ret = rzg2l_cru_v4l2_register(cru);
+ if (ret)
+ return ret;
+ }
+
+ /* Create all media device links between CRU and CSI-2's. */
+ for (i = 1; i <= CSI2_VCHANNEL; i++) {
+ struct media_entity *source, *sink;
+
+ source = &cru->csi.subdev->entity;
+ sink = &cru->vdev.entity;
+
+ ret = media_create_pad_link(source, i, sink, 0, 0);
+ if (ret) {
+ dev_err(cru->dev, "Error adding link from %s to %s\n",
+ source->name, sink->name);
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static void rzg2l_cru_group_notify_unbind(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+{
+ struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev);
+
+ rzg2l_cru_v4l2_unregister(cru);
+
+ mutex_lock(&cru->mdev_lock);
+
+ if (cru->csi.asd == asd) {
+ cru->csi.subdev = NULL;
+ dev_dbg(cru->dev, "Unbind CSI-2 %s\n", subdev->name);
+ }
+
+ mutex_unlock(&cru->mdev_lock);
+
+ media_device_unregister(&cru->mdev);
+}
+
+static int rzg2l_cru_group_notify_bound(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+{
+ struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev);
+ unsigned int i;
+
+ mutex_lock(&cru->mdev_lock);
+
+ if (cru->csi.asd == asd) {
+ cru->csi.subdev = subdev;
+ dev_dbg(cru->dev, "Bound CSI-2 %s to slot %u\n", subdev->name, i);
+ }
+
+ mutex_unlock(&cru->mdev_lock);
+
+ return 0;
+}
+
+static const struct v4l2_async_notifier_operations rzg2l_cru_async_ops = {
+ .bound = rzg2l_cru_group_notify_bound,
+ .unbind = rzg2l_cru_group_notify_unbind,
+ .complete = rzg2l_cru_group_notify_complete,
+};
+
+static int rvin_mc_parse_of(struct rzg2l_cru_dev *cru, unsigned int id)
+{
+ struct v4l2_fwnode_endpoint vep = {
+ .bus_type = V4L2_MBUS_CSI2_DPHY,
+ };
+ struct fwnode_handle *ep, *fwnode;
+ struct v4l2_async_subdev *asd;
+ int ret;
+
+ ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(cru->dev), 1, id, 0);
+ if (!ep)
+ return 0;
+
+ fwnode = fwnode_graph_get_remote_endpoint(ep);
+ ret = v4l2_fwnode_endpoint_parse(ep, &vep);
+ fwnode_handle_put(ep);
+ if (ret) {
+ dev_err(cru->dev, "Failed to parse %pOF\n", to_of_node(fwnode));
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (!of_device_is_available(to_of_node(fwnode))) {
+ dev_dbg(cru->dev, "OF device %pOF disabled, ignoring\n",
+ to_of_node(fwnode));
+ ret = -ENOTCONN;
+ goto out;
+ }
+
+ asd = v4l2_async_nf_add_fwnode(&cru->notifier, fwnode,
+ struct v4l2_async_subdev);
+ if (IS_ERR(asd)) {
+ ret = PTR_ERR(asd);
+ goto out;
+ }
+
+ cru->csi.asd = asd;
+
+ dev_dbg(cru->dev, "Added OF device %pOF to slot %u\n",
+ to_of_node(fwnode), vep.base.id);
+out:
+ fwnode_handle_put(fwnode);
+
+ return ret;
+}
+
+static int rzg2l_cru_mc_parse_of_graph(struct rzg2l_cru_dev *cru)
+{
+ int ret;
+
+ v4l2_async_nf_init(&cru->notifier);
+
+ ret = rvin_mc_parse_of(cru, 0);
+ if (ret)
+ return ret;
+
+ cru->notifier.ops = &rzg2l_cru_async_ops;
+
+ if (list_empty(&cru->notifier.asd_list))
+ return 0;
+
+ ret = v4l2_async_nf_register(&cru->v4l2_dev, &cru->notifier);
+ if (ret < 0) {
+ dev_err(cru->dev, "Notifier registration failed\n");
+ v4l2_async_nf_cleanup(&cru->notifier);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rzg2l_cru_csi2_init(struct rzg2l_cru_dev *cru)
+{
+ struct media_device *mdev = NULL;
+ const struct of_device_id *match;
+ int ret;
+
+ cru->pad.flags = MEDIA_PAD_FL_SINK;
+ ret = media_entity_pads_init(&cru->vdev.entity, 1, &cru->pad);
+ if (ret)
+ return ret;
+
+ mutex_init(&cru->mdev_lock);
+ mdev = &cru->mdev;
+ mdev->dev = cru->dev;
+ mdev->ops = &rzg2l_cru_media_ops;
+
+ match = of_match_node(cru->dev->driver->of_match_table,
+ cru->dev->of_node);
+
+ strscpy(mdev->driver_name, KBUILD_MODNAME, sizeof(mdev->driver_name));
+ strscpy(mdev->model, match->compatible, sizeof(mdev->model));
+ snprintf(mdev->bus_info, sizeof(mdev->bus_info), "platform:%s",
+ dev_name(mdev->dev));
+
+ cru->v4l2_dev.mdev = &cru->mdev;
+
+ media_device_init(mdev);
+
+ ret = rzg2l_cru_mc_parse_of_graph(cru);
+ if (ret)
+ rzg2l_cru_put(cru);
+
+ return 0;
+}
+
+static int rzg2l_cru_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct rzg2l_cru_dev *cru = container_of(ctrl->handler,
+ struct rzg2l_cru_dev,
+ ctrl_handler);
+ int ret = 0;
+
+ switch (ctrl->id) {
+ case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE:
+ if (cru->state == RZG2L_CRU_DMA_STOPPED ||
+ cru->state == RZG2L_CRU_DMA_STOPPING)
+ cru->num_buf = ctrl->val;
+ else
+ ret = -EBUSY;
+
+ break;
+ }
+
+ return ret;
+}
+
+static const struct v4l2_ctrl_ops rzg2l_cru_ctrl_ops = {
+ .s_ctrl = rzg2l_cru_s_ctrl,
+};
+
+static int rzg2l_cru_probe(struct platform_device *pdev)
+{
+ struct rzg2l_cru_dev *cru;
+ struct v4l2_ctrl *ctrl;
+ int irq, ret;
+
+ cru = devm_kzalloc(&pdev->dev, sizeof(*cru), GFP_KERNEL);
+ if (!cru)
+ return -ENOMEM;
+
+ cru->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(cru->base))
+ return PTR_ERR(cru->base);
+
+ cru->presetn = devm_reset_control_get(&pdev->dev, "presetn");
+ if (IS_ERR(cru->presetn))
+ return dev_err_probe(&pdev->dev, PTR_ERR(cru->presetn),
+ "failed to get cpg presetn\n");
+
+ cru->aresetn = devm_reset_control_get(&pdev->dev, "aresetn");
+ if (IS_ERR(cru->aresetn))
+ return dev_err_probe(&pdev->dev, PTR_ERR(cru->aresetn),
+ "failed to get cpg aresetn\n");
+
+ cru->dev = &pdev->dev;
+ cru->info = of_device_get_match_data(&pdev->dev);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ ret = rzg2l_cru_dma_register(cru, irq);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, cru);
+
+ ret = rzg2l_cru_csi2_init(cru);
+ if (ret)
+ goto error_dma_unregister;
+
+ v4l2_ctrl_handler_init(&cru->ctrl_handler, 1);
+ ctrl = v4l2_ctrl_new_std(&cru->ctrl_handler, &rzg2l_cru_ctrl_ops,
+ V4L2_CID_MIN_BUFFERS_FOR_CAPTURE,
+ 1, HW_BUFFER_MAX, 1, HW_BUFFER_DEFAULT);
+ if (cru->ctrl_handler.error) {
+ dev_err(&pdev->dev, "%s: control initialization error %d\n",
+ __func__, cru->ctrl_handler.error);
+ ret = cru->ctrl_handler.error;
+ goto free_ctrl;
+ }
+
+ ctrl->flags &= ~V4L2_CTRL_FLAG_READ_ONLY;
+ cru->v4l2_dev.ctrl_handler = &cru->ctrl_handler;
+
+ cru->num_buf = HW_BUFFER_DEFAULT;
+
+ pm_suspend_ignore_children(&pdev->dev, true);
+ pm_runtime_enable(&pdev->dev);
+
+ return 0;
+
+free_ctrl:
+ v4l2_ctrl_handler_free(&cru->ctrl_handler);
+error_dma_unregister:
+ rzg2l_cru_dma_unregister(cru);
+
+ return ret;
+}
+
+static const struct rzg2l_cru_info rzg2l_cru_info_generic = {
+ .max_width = 2800,
+ .max_height = 4096,
+};
+
+static const struct of_device_id rzg2l_cru_of_id_table[] = {
+ {
+ .compatible = "renesas,rzg2l-cru",
+ .data = &rzg2l_cru_info_generic,
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rzg2l_cru_of_id_table);
+
+static int rzg2l_cru_remove(struct platform_device *pdev)
+{
+ struct rzg2l_cru_dev *cru = platform_get_drvdata(pdev);
+
+ pm_runtime_disable(&pdev->dev);
+
+ rzg2l_cru_v4l2_unregister(cru);
+
+ v4l2_async_nf_unregister(&cru->notifier);
+ v4l2_async_nf_cleanup(&cru->notifier);
+
+ media_device_cleanup(&cru->mdev);
+ mutex_destroy(&cru->mdev_lock);
+ cru->v4l2_dev.mdev = NULL;
+
+ v4l2_ctrl_handler_free(&cru->ctrl_handler);
+ cru->vdev.ctrl_handler = NULL;
+
+ rzg2l_cru_dma_unregister(cru);
+
+ return 0;
+}
+
+static struct platform_driver rzg2l_cru_driver = {
+ .driver = {
+ .name = "rzg2l-cru",
+ .of_match_table = rzg2l_cru_of_id_table,
+ },
+ .probe = rzg2l_cru_probe,
+ .remove = rzg2l_cru_remove,
+};
+
+module_platform_driver(rzg2l_cru_driver);
+
+MODULE_DESCRIPTION("Renesas RZ/G2L CRU driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h
new file mode 100644
index 000000000000..91a28279846e
--- /dev/null
+++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h
@@ -0,0 +1,155 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Driver for Renesas RZ/G2L CRU
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ *
+ */
+
+#ifndef __RZG2L_CRU__
+#define __RZG2L_CRU__
+
+#include <linux/clk.h>
+#include <linux/reset.h>
+
+#include <media/v4l2-async.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-device.h>
+#include <media/videobuf2-v4l2.h>
+
+/* Number of HW buffers */
+#define HW_BUFFER_MAX 8
+#define HW_BUFFER_DEFAULT 3
+
+/* Address alignment mask for HW buffers */
+#define HW_BUFFER_MASK 0x1ff
+
+/* Maximum number of CSI2 virtual channels */
+#define CSI2_VCHANNEL 4
+
+/**
+ * enum rzg2l_cru_dma_state - DMA states
+ * @RZG2L_CRU_DMA_STOPPED: No operation in progress
+ * @RZG2L_CRU_DMA_STARTING: Capture starting up
+ * @RZG2L_CRU_DMA_RUNNING: Operation in progress have buffers
+ * @RZG2L_CRU_DMA_STOPPING: Stopping operation
+ */
+enum rzg2l_cru_dma_state {
+ RZG2L_CRU_DMA_STOPPED = 0,
+ RZG2L_CRU_DMA_STARTING,
+ RZG2L_CRU_DMA_RUNNING,
+ RZG2L_CRU_DMA_STOPPING,
+};
+
+/**
+ * struct rzg2l_cru_info - Information about the particular CRU implementation
+ * @max_width: max input width the CRU supports
+ * @max_height: max input height the CRU supports
+ */
+struct rzg2l_cru_info {
+ unsigned int max_width;
+ unsigned int max_height;
+};
+
+struct rzg2l_cru_csi {
+ struct v4l2_async_subdev *asd;
+ struct v4l2_subdev *subdev;
+ u32 channel;
+};
+
+/**
+ * struct rzg2l_cru_dev - Renesas CRU device structure
+ * @dev: (OF) device
+ * @base: device I/O register space remapped to virtual memory
+ * @info: info about CRU instance
+ *
+ * @presetn: CRU_PRESETN reset line
+ * @aresetn: CRU_ARESETN reset line
+ *
+ * @vdev: V4L2 video device associated with CRU
+ * @v4l2_dev: V4L2 device
+ * @ctrl_handler: V4L2 control handler
+ * @num_buf: Holds the current number of buffers enabled
+ * @notifier: V4L2 asynchronous subdevs notifier
+ *
+ * @csi: CSI info
+ * @mdev: media device
+ * @mdev_lock: protects the count, notifier and csi members
+ * @pad: media pad for the video device entity
+ *
+ * @lock: protects @queue
+ * @queue: vb2 buffers queue
+ * @scratch: cpu address for scratch buffer
+ * @scratch_phys: physical address of the scratch buffer
+ *
+ * @qlock: protects @queue_buf, @buf_list, @sequence
+ * @state
+ * @queue_buf: Keeps track of buffers given to HW slot
+ * @buf_list: list of queued buffers
+ * @sequence: V4L2 buffers sequence number
+ * @state: keeps track of operation state
+ *
+ * @is_csi: flag to mark the CRU as using a CSI-2 subdevice
+ *
+ * @input_is_yuv: flag to mark the input format of CRU
+ * @output_is_yuv: flag to mark the output format of CRU
+ *
+ * @mbus_code: media bus format code
+ * @format: active V4L2 pixel format
+ *
+ * @compose: active composing
+ * @source: active size of the video source
+ * @std: active video standard of the video source
+ */
+struct rzg2l_cru_dev {
+ struct device *dev;
+ void __iomem *base;
+ const struct rzg2l_cru_info *info;
+
+ struct reset_control *presetn;
+ struct reset_control *aresetn;
+
+ struct video_device vdev;
+ struct v4l2_device v4l2_dev;
+ struct v4l2_ctrl_handler ctrl_handler;
+ u8 num_buf;
+
+ struct v4l2_async_notifier notifier;
+
+ struct rzg2l_cru_csi csi;
+ struct media_device mdev;
+ struct mutex mdev_lock;
+ struct media_pad pad;
+
+ struct mutex lock;
+ struct vb2_queue queue;
+ void *scratch;
+ dma_addr_t scratch_phys;
+
+ spinlock_t qlock;
+ struct vb2_v4l2_buffer *queue_buf[HW_BUFFER_MAX];
+ struct list_head buf_list;
+ unsigned int sequence;
+ enum rzg2l_cru_dma_state state;
+
+ bool is_csi;
+
+ bool input_is_yuv;
+ bool output_is_yuv;
+
+ u32 mbus_code;
+ struct v4l2_pix_format format;
+
+ struct v4l2_rect compose;
+};
+
+int rzg2l_cru_dma_register(struct rzg2l_cru_dev *cru, int irq);
+void rzg2l_cru_dma_unregister(struct rzg2l_cru_dev *cru);
+
+int rzg2l_cru_v4l2_register(struct rzg2l_cru_dev *cru);
+void rzg2l_cru_v4l2_unregister(struct rzg2l_cru_dev *cru);
+
+const struct v4l2_format_info *rzg2l_cru_format_from_pixel(u32 format);
+
+#endif
diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c
new file mode 100644
index 000000000000..0fcf4baccca9
--- /dev/null
+++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c
@@ -0,0 +1,722 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Renesas RZ/G2L CRU
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ *
+ * Based on Renesas R-Car VIN
+ * Copyright (C) 2011-2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Cogent Embedded, Inc., <source@cogentembedded.com>
+ * Copyright (C) 2008 Magnus Damm
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+
+#include <media/videobuf2-dma-contig.h>
+
+#include "rzg2l-cru.h"
+
+/* HW CRU Registers Definition */
+/* CRU Control Register */
+#define CRUnCTRL 0x0
+#define CRUnCTRL_VINSEL(x) ((x) << 0)
+
+/* CRU Interrupt Enable Register */
+#define CRUnIE 0x4
+#define CRUnIE_SFE BIT(16)
+#define CRUnIE_EFE BIT(17)
+
+/* CRU Interrupt Status Register */
+#define CRUnINTS 0x8
+#define CRUnINTS_SFS BIT(16)
+
+/* CRU Reset Register */
+#define CRUnRST 0xc
+#define CRUnRST_VRESETN BIT(0)
+
+/* Memory Bank Base Address (Lower) Register for CRU Image Data */
+#define AMnMBxADDRL(x) (0x100 + ((x) * 8))
+
+/* Memory Bank Base Address (Higher) Register for CRU Image Data */
+#define AMnMBxADDRH(x) (0x104 + ((x) * 8))
+
+/* Memory Bank Enable Register for CRU Image Data */
+#define AMnMBVALID 0x148
+#define AMnMBVALID_MBVALID(x) GENMASK(x, 0)
+
+/* Memory Bank Status Register for CRU Image Data */
+#define AMnMBS 0x14c
+#define AMnMBS_MBSTS 0x7
+
+/* AXI Master FIFO Pointer Register for CRU Image Data */
+#define AMnFIFOPNTR 0x168
+#define AMnFIFOPNTR_FIFOWPNTR GENMASK(7, 0)
+#define AMnFIFOPNTR_FIFORPNTR_Y GENMASK(23, 16)
+
+/* AXI Master Transfer Stop Register for CRU Image Data */
+#define AMnAXISTP 0x174
+#define AMnAXISTP_AXI_STOP BIT(0)
+
+/* AXI Master Transfer Stop Status Register for CRU Image Data */
+#define AMnAXISTPACK 0x178
+#define AMnAXISTPACK_AXI_STOP_ACK BIT(0)
+
+/* CRU Image Processing Enable Register */
+#define ICnEN 0x200
+#define ICnEN_ICEN BIT(0)
+
+/* CRU Image Processing Main Control Register */
+#define ICnMC 0x208
+#define ICnMC_CSCTHR BIT(5)
+#define ICnMC_INF_YUV8_422 (0x1e << 16)
+#define ICnMC_INF_USER (0x30 << 16)
+#define ICnMC_VCSEL(x) ((x) << 22)
+#define ICnMC_INF_MASK GENMASK(21, 16)
+
+/* CRU Module Status Register */
+#define ICnMS 0x254
+#define ICnMS_IA BIT(2)
+
+/* CRU Data Output Mode Register */
+#define ICnDMR 0x26c
+#define ICnDMR_YCMODE_UYVY (1 << 4)
+
+#define RZG2L_TIMEOUT_MS 100
+#define RZG2L_RETRIES 10
+
+struct rzg2l_cru_buffer {
+ struct vb2_v4l2_buffer vb;
+ struct list_head list;
+};
+
+#define to_buf_list(vb2_buffer) (&container_of(vb2_buffer, \
+ struct rzg2l_cru_buffer, \
+ vb)->list)
+
+static void rzg2l_cru_write(struct rzg2l_cru_dev *cru, u32 offset, u32 value)
+{
+ iowrite32(value, cru->base + offset);
+}
+
+static u32 rzg2l_cru_read(struct rzg2l_cru_dev *cru, u32 offset)
+{
+ return ioread32(cru->base + offset);
+}
+
+/* Need to hold qlock before calling */
+static void return_unused_buffers(struct rzg2l_cru_dev *cru,
+ enum vb2_buffer_state state)
+{
+ struct rzg2l_cru_buffer *buf, *node;
+ unsigned long flags;
+ unsigned int i;
+
+ spin_lock_irqsave(&cru->qlock, flags);
+ for (i = 0; i < cru->num_buf; i++) {
+ if (cru->queue_buf[i]) {
+ vb2_buffer_done(&cru->queue_buf[i]->vb2_buf,
+ state);
+ cru->queue_buf[i] = NULL;
+ }
+ }
+
+ list_for_each_entry_safe(buf, node, &cru->buf_list, list) {
+ vb2_buffer_done(&buf->vb.vb2_buf, state);
+ list_del(&buf->list);
+ }
+ spin_unlock_irqrestore(&cru->qlock, flags);
+}
+
+static int rzg2l_cru_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
+ unsigned int *nplanes, unsigned int sizes[],
+ struct device *alloc_devs[])
+{
+ struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vq);
+
+ /* Make sure the image size is large enough. */
+ if (*nplanes)
+ return sizes[0] < cru->format.sizeimage ? -EINVAL : 0;
+
+ *nplanes = 1;
+ sizes[0] = cru->format.sizeimage;
+
+ return 0;
+};
+
+static int rzg2l_cru_buffer_prepare(struct vb2_buffer *vb)
+{
+ struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vb->vb2_queue);
+ unsigned long size = cru->format.sizeimage;
+
+ if (vb2_plane_size(vb, 0) < size) {
+ dev_err(cru->dev, "buffer too small (%lu < %lu)\n",
+ vb2_plane_size(vb, 0), size);
+ return -EINVAL;
+ }
+
+ vb2_set_plane_payload(vb, 0, size);
+
+ return 0;
+}
+
+static void rzg2l_cru_buffer_queue(struct vb2_buffer *vb)
+{
+ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+ struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vb->vb2_queue);
+ unsigned long flags;
+
+ spin_lock_irqsave(&cru->qlock, flags);
+
+ list_add_tail(to_buf_list(vbuf), &cru->buf_list);
+
+ spin_unlock_irqrestore(&cru->qlock, flags);
+}
+
+static int rzg2l_cru_mc_validate_format(struct rzg2l_cru_dev *cru,
+ struct v4l2_subdev *sd,
+ struct media_pad *pad)
+{
+ struct v4l2_subdev_format fmt = {
+ .which = V4L2_SUBDEV_FORMAT_ACTIVE,
+ };
+
+ fmt.pad = pad->index;
+ fmt.stream = 0;
+ if (v4l2_subdev_call(sd, pad, get_fmt, v4l2_subdev_get_active_state(sd), &fmt))
+ return -EPIPE;
+
+ if (cru->is_csi) {
+ switch (fmt.format.code) {
+ case MEDIA_BUS_FMT_UYVY8_2X8:
+ break;
+ default:
+ return -EPIPE;
+ }
+ }
+ cru->mbus_code = fmt.format.code;
+
+ switch (fmt.format.field) {
+ case V4L2_FIELD_TOP:
+ case V4L2_FIELD_BOTTOM:
+ case V4L2_FIELD_NONE:
+ case V4L2_FIELD_INTERLACED_TB:
+ case V4L2_FIELD_INTERLACED_BT:
+ case V4L2_FIELD_INTERLACED:
+ case V4L2_FIELD_SEQ_TB:
+ case V4L2_FIELD_SEQ_BT:
+ break;
+ default:
+ return -EPIPE;
+ }
+
+ if (fmt.format.width != cru->format.width ||
+ fmt.format.height != cru->format.height ||
+ fmt.format.code != cru->mbus_code)
+ return -EPIPE;
+
+ return 0;
+}
+
+static void rzg2l_cru_set_slot_addr(struct rzg2l_cru_dev *cru,
+ int slot, dma_addr_t addr)
+{
+ const struct v4l2_format_info *fmt;
+ int offsetx, offsety;
+ dma_addr_t offset;
+
+ fmt = rzg2l_cru_format_from_pixel(cru->format.pixelformat);
+
+ /*
+ * There is no HW support for composition do the best we can
+ * by modifying the buffer offset
+ */
+ offsetx = cru->compose.left * fmt->bpp[0];
+ offsety = cru->compose.top * cru->format.bytesperline;
+ offset = addr + offsetx + offsety;
+
+ /*
+ * The address needs to be 512 bytes aligned. Driver should never accept
+ * settings that do not satisfy this in the first place...
+ */
+ if (WARN_ON((offsetx | offsety | offset) & HW_BUFFER_MASK))
+ return;
+
+ /* Currently, we just use the buffer in 32 bits address */
+ rzg2l_cru_write(cru, AMnMBxADDRL(slot), offset);
+ rzg2l_cru_write(cru, AMnMBxADDRH(slot), 0);
+}
+
+/*
+ * Moves a buffer from the queue to the HW slot. If no buffer is
+ * available use the scratch buffer. The scratch buffer is never
+ * returned to userspace, its only function is to enable the capture
+ * loop to keep running.
+ */
+static void rzg2l_cru_fill_hw_slot(struct rzg2l_cru_dev *cru, int slot)
+{
+ struct vb2_v4l2_buffer *vbuf;
+ struct rzg2l_cru_buffer *buf;
+ dma_addr_t phys_addr;
+
+ /* A already populated slot shall never be overwritten. */
+ if (WARN_ON(cru->queue_buf[slot]))
+ return;
+
+ dev_dbg(cru->dev, "Filling HW slot: %d\n", slot);
+
+ if (list_empty(&cru->buf_list)) {
+ cru->queue_buf[slot] = NULL;
+ phys_addr = cru->scratch_phys;
+ } else {
+ /* Keep track of buffer we give to HW */
+ buf = list_entry(cru->buf_list.next,
+ struct rzg2l_cru_buffer, list);
+ vbuf = &buf->vb;
+ list_del_init(to_buf_list(vbuf));
+ cru->queue_buf[slot] = vbuf;
+
+ /* Setup DMA */
+ phys_addr = vb2_dma_contig_plane_dma_addr(&vbuf->vb2_buf, 0);
+ }
+
+ rzg2l_cru_set_slot_addr(cru, slot, phys_addr);
+}
+
+static void rzg2l_cru_initialize_axi(struct rzg2l_cru_dev *cru)
+{
+ unsigned int slot;
+
+ /*
+ * Set image data memory banks.
+ * Currently, we will use maximum address.
+ */
+ rzg2l_cru_write(cru, AMnMBVALID, AMnMBVALID_MBVALID(cru->num_buf - 1));
+
+ for (slot = 0; slot < cru->num_buf; slot++)
+ rzg2l_cru_fill_hw_slot(cru, slot);
+}
+
+static void rzg2l_cru_csi2_setup(struct rzg2l_cru_dev *cru)
+{
+ u32 icnmc;
+
+ switch (cru->mbus_code) {
+ case MEDIA_BUS_FMT_UYVY8_2X8:
+ icnmc = ICnMC_INF_YUV8_422;
+ cru->input_is_yuv = true;
+ break;
+ default:
+ cru->input_is_yuv = false;
+ icnmc = ICnMC_INF_USER;
+ break;
+ }
+
+ icnmc |= (rzg2l_cru_read(cru, ICnMC) & ~ICnMC_INF_MASK);
+
+ /* Set virtual channel CSI2 */
+ icnmc |= ICnMC_VCSEL(cru->csi.channel);
+
+ rzg2l_cru_write(cru, ICnMC, icnmc);
+}
+
+static int rzg2l_cru_initialize_image_conv(struct rzg2l_cru_dev *cru)
+{
+ u32 icndmr;
+
+ if (cru->is_csi)
+ rzg2l_cru_csi2_setup(cru);
+
+ /* Output format */
+ switch (cru->format.pixelformat) {
+ case V4L2_PIX_FMT_UYVY:
+ icndmr = ICnDMR_YCMODE_UYVY;
+ cru->output_is_yuv = true;
+ break;
+ default:
+ dev_err(cru->dev, "Invalid pixelformat (0x%x)\n",
+ cru->format.pixelformat);
+ return -EINVAL;
+ }
+
+ /* If input and output use same colorspace, do bypass mode */
+ if (cru->output_is_yuv == cru->input_is_yuv)
+ rzg2l_cru_write(cru, ICnMC,
+ rzg2l_cru_read(cru, ICnMC) | ICnMC_CSCTHR);
+ else
+ rzg2l_cru_write(cru, ICnMC,
+ rzg2l_cru_read(cru, ICnMC) & (~ICnMC_CSCTHR));
+
+ /* Set output data format */
+ rzg2l_cru_write(cru, ICnDMR, icndmr);
+
+ return 0;
+}
+
+static int rzg2l_cru_set_stream(struct rzg2l_cru_dev *cru, int on)
+{
+ struct media_pipeline *pipe;
+ struct v4l2_subdev *sd;
+ struct media_pad *pad;
+ unsigned long flags;
+ int ret;
+
+ pad = media_entity_remote_pad(&cru->pad);
+ if (!pad)
+ return -EPIPE;
+
+ sd = media_entity_to_v4l2_subdev(pad->entity);
+
+ if (!on) {
+ media_pipeline_stop(cru->vdev.entity.pads);
+ return v4l2_subdev_call(sd, video, s_stream, 0);
+ }
+
+ ret = rzg2l_cru_mc_validate_format(cru, sd, pad);
+ if (ret)
+ return ret;
+
+ spin_lock_irqsave(&cru->qlock, flags);
+
+ /* Select a video input */
+ if (cru->is_csi)
+ rzg2l_cru_write(cru, CRUnCTRL, CRUnCTRL_VINSEL(0));
+
+ /* Cancel the software reset for image processing block */
+ rzg2l_cru_write(cru, CRUnRST, CRUnRST_VRESETN);
+
+ /* Disable and clear the interrupt before using */
+ rzg2l_cru_write(cru, CRUnIE, 0);
+ rzg2l_cru_write(cru, CRUnINTS, 0x001f000f);
+
+ /* Initialize the AXI master */
+ rzg2l_cru_initialize_axi(cru);
+
+ /* Initialize image convert */
+ ret = rzg2l_cru_initialize_image_conv(cru);
+ if (ret) {
+ spin_unlock_irqrestore(&cru->qlock, flags);
+ return ret;
+ }
+
+ /* Enable interrupt */
+ rzg2l_cru_write(cru, CRUnIE, CRUnIE_EFE);
+
+ /* Enable image processing reception */
+ rzg2l_cru_write(cru, ICnEN, ICnEN_ICEN);
+
+ spin_unlock_irqrestore(&cru->qlock, flags);
+
+ pipe = sd->entity.pads->pipe ? sd->entity.pads->pipe : &cru->vdev.pipe;
+ ret = media_pipeline_start(cru->vdev.entity.pads, pipe);
+ if (ret)
+ return ret;
+
+ ret = v4l2_subdev_call(sd, video, s_stream, 1);
+ if (ret == -ENOIOCTLCMD)
+ ret = 0;
+ if (ret)
+ media_pipeline_stop(cru->vdev.entity.pads);
+
+ return ret;
+}
+
+static void rzg2l_cru_stop_streaming(struct rzg2l_cru_dev *cru)
+{
+ u32 amnfifopntr, amnfifopntr_w, amnfifopntr_r_y;
+ unsigned int retries = 0;
+ unsigned long flags;
+ u32 icnms;
+
+ cru->state = RZG2L_CRU_DMA_STOPPING;
+
+ rzg2l_cru_set_stream(cru, 0);
+
+ spin_lock_irqsave(&cru->qlock, flags);
+
+ /* Enable IRQ to detect frame start reception */
+ rzg2l_cru_write(cru, CRUnINTS,
+ (~rzg2l_cru_read(cru, CRUnINTS)) | CRUnINTS_SFS);
+ rzg2l_cru_write(cru, CRUnIE, CRUnIE_SFE);
+
+ /* Wait for streaming to stop */
+ while (retries++ < RZG2L_RETRIES) {
+ spin_unlock_irqrestore(&cru->qlock, flags);
+ msleep(RZG2L_TIMEOUT_MS);
+ spin_lock_irqsave(&cru->qlock, flags);
+ }
+
+ icnms = rzg2l_cru_read(cru, ICnMS) & ICnMS_IA;
+ if (icnms)
+ dev_err(cru->dev, "Failed stop HW, something is seriously broken\n");
+
+ cru->state = RZG2L_CRU_DMA_STOPPED;
+
+ /* Stop the operation of image conversion */
+ rzg2l_cru_write(cru, ICnEN, 0);
+
+ /* Disable and clear the interrupt */
+ rzg2l_cru_write(cru, CRUnIE, 0);
+ rzg2l_cru_write(cru, CRUnINTS, 0x001F0F0F);
+
+ /* Wait until the FIFO becomes empty */
+ for (retries = 5; retries > 0; retries--) {
+ amnfifopntr = rzg2l_cru_read(cru, AMnFIFOPNTR);
+
+ amnfifopntr_w = amnfifopntr & AMnFIFOPNTR_FIFOWPNTR;
+ amnfifopntr_r_y =
+ (amnfifopntr & AMnFIFOPNTR_FIFORPNTR_Y) >> 16;
+ if (amnfifopntr_w == amnfifopntr_r_y)
+ break;
+
+ usleep_range(10, 20);
+ }
+
+ /* Notify that FIFO is not empty here */
+ if (!retries)
+ dev_err(cru->dev, "Failed to empty FIFO\n");
+
+ /* Stop AXI bus */
+ rzg2l_cru_write(cru, AMnAXISTP, AMnAXISTP_AXI_STOP);
+
+ /* Wait until the AXI bus stop */
+ for (retries = 5; retries > 0; retries--) {
+ if (rzg2l_cru_read(cru, AMnAXISTPACK) &
+ AMnAXISTPACK_AXI_STOP_ACK)
+ break;
+
+ usleep_range(10, 20);
+ };
+
+ /* Notify that AXI bus can not stop here */
+ if (!retries)
+ dev_err(cru->dev, "Failed to stop AXI bus\n");
+
+ /* Cancel the AXI bus stop request */
+ rzg2l_cru_write(cru, AMnAXISTP, 0);
+
+ /* Resets the image processing module */
+ rzg2l_cru_write(cru, CRUnRST, 0);
+
+ spin_unlock_irqrestore(&cru->qlock, flags);
+
+ /* Set reset state */
+ reset_control_assert(cru->aresetn);
+}
+
+static int rzg2l_cru_start_streaming_vq(struct vb2_queue *vq, unsigned int count)
+{
+ struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vq);
+ int ret;
+
+ /* Release reset state */
+ ret = reset_control_deassert(cru->aresetn);
+ if (ret) {
+ dev_err(cru->dev, "failed to deassert aresetn\n");
+ return ret;
+ }
+
+ /* Allocate scratch buffer. */
+ cru->scratch = dma_alloc_coherent(cru->dev, cru->format.sizeimage,
+ &cru->scratch_phys, GFP_KERNEL);
+ if (!cru->scratch) {
+ return_unused_buffers(cru, VB2_BUF_STATE_QUEUED);
+ dev_err(cru->dev, "Failed to allocate scratch buffer\n");
+ return -ENOMEM;
+ }
+
+ cru->sequence = 0;
+
+ ret = rzg2l_cru_set_stream(cru, 1);
+ if (ret) {
+ return_unused_buffers(cru, VB2_BUF_STATE_QUEUED);
+ goto out;
+ }
+
+ cru->state = RZG2L_CRU_DMA_STARTING;
+
+ dev_dbg(cru->dev, "Starting to capture\n");
+
+out:
+ if (ret)
+ dma_free_coherent(cru->dev, cru->format.sizeimage, cru->scratch,
+ cru->scratch_phys);
+
+ return ret;
+}
+
+static void rzg2l_cru_stop_streaming_vq(struct vb2_queue *vq)
+{
+ struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vq);
+
+ rzg2l_cru_stop_streaming(cru);
+
+ /* Free scratch buffer */
+ dma_free_coherent(cru->dev, cru->format.sizeimage, cru->scratch,
+ cru->scratch_phys);
+
+ return_unused_buffers(cru, VB2_BUF_STATE_ERROR);
+}
+
+static const struct vb2_ops rzg2l_cru_qops = {
+ .queue_setup = rzg2l_cru_queue_setup,
+ .buf_prepare = rzg2l_cru_buffer_prepare,
+ .buf_queue = rzg2l_cru_buffer_queue,
+ .start_streaming = rzg2l_cru_start_streaming_vq,
+ .stop_streaming = rzg2l_cru_stop_streaming_vq,
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
+};
+
+static irqreturn_t rzg2l_cru_irq(int irq, void *data)
+{
+ struct rzg2l_cru_dev *cru = data;
+ unsigned int handled = 0;
+ unsigned long flags;
+ u32 irq_status;
+ u32 amnmbs;
+ int slot;
+
+ spin_lock_irqsave(&cru->qlock, flags);
+
+ irq_status = rzg2l_cru_read(cru, CRUnINTS);
+ if (!irq_status)
+ goto done;
+
+ handled = 1;
+
+ rzg2l_cru_write(cru, CRUnINTS, rzg2l_cru_read(cru, CRUnINTS));
+
+ /* Nothing to do if capture status is 'RZG2L_CRU_DMA_STOPPED' */
+ if (cru->state == RZG2L_CRU_DMA_STOPPED) {
+ dev_dbg(cru->dev, "IRQ while state stopped\n");
+ goto done;
+ }
+
+ /* Increase stop retries if capture status is 'RZG2L_CRU_DMA_STOPPING' */
+ if (cru->state == RZG2L_CRU_DMA_STOPPING) {
+ if (irq_status & CRUnINTS_SFS)
+ dev_dbg(cru->dev, "IRQ while state stopping\n");
+ goto done;
+ }
+
+ /* Prepare for capture and update state */
+ amnmbs = rzg2l_cru_read(cru, AMnMBS);
+ slot = amnmbs & AMnMBS_MBSTS;
+
+ /*
+ * AMnMBS.MBSTS indicates the destination of Memory Bank (MB).
+ * Recalculate to get the current transfer complete MB.
+ */
+ if (slot == 0)
+ slot = cru->num_buf - 1;
+ else
+ slot--;
+
+ /*
+ * To hand buffers back in a known order to userspace start
+ * to capture first from slot 0.
+ */
+ if (cru->state == RZG2L_CRU_DMA_STARTING) {
+ if (slot != 0) {
+ dev_dbg(cru->dev, "Starting sync slot: %d\n", slot);
+ goto done;
+ }
+
+ dev_dbg(cru->dev, "Capture start synced!\n");
+ cru->state = RZG2L_CRU_DMA_RUNNING;
+ }
+
+ /* Capture frame */
+ if (cru->queue_buf[slot]) {
+ cru->queue_buf[slot]->field = cru->format.field;
+ cru->queue_buf[slot]->sequence = cru->sequence;
+ cru->queue_buf[slot]->vb2_buf.timestamp = ktime_get_ns();
+ vb2_buffer_done(&cru->queue_buf[slot]->vb2_buf,
+ VB2_BUF_STATE_DONE);
+ cru->queue_buf[slot] = NULL;
+ } else {
+ /* Scratch buffer was used, dropping frame. */
+ dev_dbg(cru->dev, "Dropping frame %u\n", cru->sequence);
+ }
+
+ cru->sequence++;
+
+ /* Prepare for next frame */
+ rzg2l_cru_fill_hw_slot(cru, slot);
+
+done:
+ spin_unlock_irqrestore(&cru->qlock, flags);
+
+ return IRQ_RETVAL(handled);
+}
+
+void rzg2l_cru_dma_unregister(struct rzg2l_cru_dev *cru)
+{
+ mutex_destroy(&cru->lock);
+
+ v4l2_device_unregister(&cru->v4l2_dev);
+ reset_control_assert(cru->presetn);
+}
+
+int rzg2l_cru_dma_register(struct rzg2l_cru_dev *cru, int irq)
+{
+ struct vb2_queue *q = &cru->queue;
+ unsigned int i;
+ int ret;
+
+ ret = reset_control_deassert(cru->presetn);
+ if (ret) {
+ dev_err(cru->dev, "failed to deassert presetn\n");
+ return ret;
+ }
+
+ /* Initialize the top-level structure */
+ ret = v4l2_device_register(cru->dev, &cru->v4l2_dev);
+ if (ret)
+ return ret;
+
+ mutex_init(&cru->lock);
+ INIT_LIST_HEAD(&cru->buf_list);
+
+ spin_lock_init(&cru->qlock);
+
+ cru->state = RZG2L_CRU_DMA_STOPPED;
+
+ for (i = 0; i < HW_BUFFER_MAX; i++)
+ cru->queue_buf[i] = NULL;
+
+ /* buffer queue */
+ q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ q->io_modes = VB2_MMAP | VB2_READ | VB2_DMABUF;
+ q->lock = &cru->lock;
+ q->drv_priv = cru;
+ q->buf_struct_size = sizeof(struct rzg2l_cru_buffer);
+ q->ops = &rzg2l_cru_qops;
+ q->mem_ops = &vb2_dma_contig_memops;
+ q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+ q->min_buffers_needed = 4;
+ q->dev = cru->dev;
+
+ ret = vb2_queue_init(q);
+ if (ret < 0) {
+ dev_err(cru->dev, "failed to initialize VB2 queue\n");
+ goto error;
+ }
+
+ /* IRQ */
+ ret = devm_request_irq(cru->dev, irq, rzg2l_cru_irq, IRQF_SHARED,
+ KBUILD_MODNAME, cru);
+ if (ret) {
+ dev_err(cru->dev, "failed to request irq\n");
+ goto error;
+ }
+
+ return 0;
+
+error:
+ rzg2l_cru_dma_unregister(cru);
+ return ret;
+}
diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c
new file mode 100644
index 000000000000..b1b1bfda7eb1
--- /dev/null
+++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Renesas RZ/G2L CRU
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ *
+ * Based on Renesas R-Car VIN
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2011-2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Cogent Embedded, Inc., <source@cogentembedded.com>
+ * Copyright (C) 2008 Magnus Damm
+ */
+
+#include <linux/pm_runtime.h>
+
+#include <media/v4l2-event.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-mc.h>
+#include <media/v4l2-rect.h>
+
+#include "rzg2l-cru.h"
+
+#define RZG2L_CRU_DEFAULT_FORMAT V4L2_PIX_FMT_UYVY
+#define RZG2L_CRU_DEFAULT_WIDTH 800
+#define RZG2L_CRU_DEFAULT_HEIGHT 600
+#define RZG2L_CRU_DEFAULT_FIELD V4L2_FIELD_NONE
+#define RZG2L_CRU_DEFAULT_COLORSPACE V4L2_COLORSPACE_SRGB
+
+/* -----------------------------------------------------------------------------
+ * Format Conversions
+ */
+
+static const struct v4l2_format_info rzg2l_cru_formats[] = {
+ {
+ .format = V4L2_PIX_FMT_UYVY,
+ .bpp[0] = 2,
+ },
+};
+
+const struct v4l2_format_info *rzg2l_cru_format_from_pixel(u32 format)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(rzg2l_cru_formats); i++)
+ if (rzg2l_cru_formats[i].format == format)
+ return rzg2l_cru_formats + i;
+
+ return NULL;
+}
+
+static u32 rzg2l_cru_format_bytesperline(struct v4l2_pix_format *pix)
+{
+ const struct v4l2_format_info *fmt;
+
+ fmt = rzg2l_cru_format_from_pixel(pix->pixelformat);
+
+ if (WARN_ON(!fmt))
+ return -EINVAL;
+
+ return pix->width * fmt->bpp[0];
+}
+
+static u32 rzg2l_cru_format_sizeimage(struct v4l2_pix_format *pix)
+{
+ return pix->bytesperline * pix->height;
+}
+
+static void rzg2l_cru_format_align(struct rzg2l_cru_dev *cru,
+ struct v4l2_pix_format *pix)
+{
+ if (!rzg2l_cru_format_from_pixel(pix->pixelformat))
+ pix->pixelformat = RZG2L_CRU_DEFAULT_FORMAT;
+
+ switch (pix->field) {
+ case V4L2_FIELD_TOP:
+ case V4L2_FIELD_BOTTOM:
+ case V4L2_FIELD_NONE:
+ case V4L2_FIELD_INTERLACED_TB:
+ case V4L2_FIELD_INTERLACED_BT:
+ case V4L2_FIELD_INTERLACED:
+ break;
+ default:
+ pix->field = RZG2L_CRU_DEFAULT_FIELD;
+ break;
+ }
+
+ /* Limit to CRU capabilities */
+ v4l_bound_align_image(&pix->width, 320, cru->info->max_width, 1,
+ &pix->height, 240, cru->info->max_height, 2, 0);
+
+ pix->bytesperline = rzg2l_cru_format_bytesperline(pix);
+ pix->sizeimage = rzg2l_cru_format_sizeimage(pix);
+
+ dev_dbg(cru->dev, "Format %ux%u bpl: %u size: %u\n",
+ pix->width, pix->height, pix->bytesperline, pix->sizeimage);
+}
+
+static void rzg2l_cru_try_format(struct rzg2l_cru_dev *cru,
+ struct v4l2_pix_format *pix)
+{
+ /*
+ * The V4L2 specification clearly documents the colorspace fields
+ * as being set by drivers for capture devices. Using the values
+ * supplied by userspace thus wouldn't comply with the API. Until
+ * the API is updated force fixed values.
+ */
+ pix->colorspace = RZG2L_CRU_DEFAULT_COLORSPACE;
+ pix->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix->colorspace);
+ pix->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(pix->colorspace);
+ pix->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true, pix->colorspace,
+ pix->ycbcr_enc);
+
+ rzg2l_cru_format_align(cru, pix);
+}
+
+static int rzg2l_cru_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct rzg2l_cru_dev *cru = video_drvdata(file);
+
+ strscpy(cap->driver, KBUILD_MODNAME, sizeof(cap->driver));
+ strscpy(cap->card, "RZG2L_CRU", sizeof(cap->card));
+ snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
+ dev_name(cru->dev));
+ return 0;
+}
+
+static int rzg2l_cru_try_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct rzg2l_cru_dev *cru = video_drvdata(file);
+
+ rzg2l_cru_try_format(cru, &f->fmt.pix);
+
+ return 0;
+}
+
+static int rzg2l_cru_s_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct rzg2l_cru_dev *cru = video_drvdata(file);
+
+ if (vb2_is_busy(&cru->queue))
+ return -EBUSY;
+
+ rzg2l_cru_try_format(cru, &f->fmt.pix);
+
+ cru->format = f->fmt.pix;
+
+ cru->compose.top = 0;
+ cru->compose.left = 0;
+ cru->compose.width = cru->format.width;
+ cru->compose.height = cru->format.height;
+
+ return 0;
+}
+
+static int rzg2l_cru_g_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct rzg2l_cru_dev *cru = video_drvdata(file);
+
+ f->fmt.pix = cru->format;
+
+ return 0;
+}
+
+static int rzg2l_cru_enum_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ if (f->index >= ARRAY_SIZE(rzg2l_cru_formats))
+ return -EINVAL;
+
+ f->pixelformat = rzg2l_cru_formats[f->index].format;
+
+ return 0;
+}
+
+static int rzg2l_cru_subscribe_event(struct v4l2_fh *fh,
+ const struct v4l2_event_subscription *sub)
+{
+ switch (sub->type) {
+ case V4L2_EVENT_SOURCE_CHANGE:
+ return v4l2_event_subscribe(fh, sub, 4, NULL);
+ }
+ return v4l2_ctrl_subscribe_event(fh, sub);
+}
+
+static const struct v4l2_ioctl_ops rzg2l_cru_ioctl_ops = {
+ .vidioc_querycap = rzg2l_cru_querycap,
+ .vidioc_try_fmt_vid_cap = rzg2l_cru_try_fmt_vid_cap,
+ .vidioc_g_fmt_vid_cap = rzg2l_cru_g_fmt_vid_cap,
+ .vidioc_s_fmt_vid_cap = rzg2l_cru_s_fmt_vid_cap,
+ .vidioc_enum_fmt_vid_cap = rzg2l_cru_enum_fmt_vid_cap,
+
+ .vidioc_reqbufs = vb2_ioctl_reqbufs,
+ .vidioc_create_bufs = vb2_ioctl_create_bufs,
+ .vidioc_querybuf = vb2_ioctl_querybuf,
+ .vidioc_qbuf = vb2_ioctl_qbuf,
+ .vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_expbuf = vb2_ioctl_expbuf,
+ .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+ .vidioc_streamon = vb2_ioctl_streamon,
+ .vidioc_streamoff = vb2_ioctl_streamoff,
+
+ .vidioc_log_status = v4l2_ctrl_log_status,
+ .vidioc_subscribe_event = rzg2l_cru_subscribe_event,
+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+/* -----------------------------------------------------------------------------
+ * Media controller file operations
+ */
+
+static int rzg2l_cru_open(struct file *file)
+{
+ struct rzg2l_cru_dev *cru = video_drvdata(file);
+ int ret;
+
+ ret = pm_runtime_resume_and_get(cru->dev);
+ if (ret < 0)
+ return ret;
+
+ ret = mutex_lock_interruptible(&cru->lock);
+ if (ret)
+ goto err_pm;
+
+ file->private_data = cru;
+ ret = v4l2_fh_open(file);
+ if (ret)
+ goto err_unlock;
+
+ ret = v4l2_pipeline_pm_get(&cru->vdev.entity);
+ if (ret < 0)
+ goto err_open;
+
+ ret = v4l2_ctrl_handler_setup(&cru->ctrl_handler);
+ if (ret)
+ goto err_power;
+
+ mutex_unlock(&cru->lock);
+
+ return 0;
+err_power:
+ v4l2_pipeline_pm_put(&cru->vdev.entity);
+err_open:
+ v4l2_fh_release(file);
+err_unlock:
+ mutex_unlock(&cru->lock);
+err_pm:
+ pm_runtime_put(cru->dev);
+
+ return ret;
+}
+
+static int rzg2l_cru_release(struct file *file)
+{
+ struct rzg2l_cru_dev *cru = video_drvdata(file);
+ int ret;
+
+ mutex_lock(&cru->lock);
+
+ /* the release helper will cleanup any on-going streaming. */
+ ret = _vb2_fop_release(file, NULL);
+
+ v4l2_pipeline_pm_put(&cru->vdev.entity);
+ pm_runtime_put(cru->dev);
+
+ mutex_unlock(&cru->lock);
+
+ return ret;
+}
+
+static const struct v4l2_file_operations rzg2l_cru_fops = {
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = video_ioctl2,
+ .open = rzg2l_cru_open,
+ .release = rzg2l_cru_release,
+ .poll = vb2_fop_poll,
+ .mmap = vb2_fop_mmap,
+ .read = vb2_fop_read,
+};
+
+void rzg2l_cru_v4l2_unregister(struct rzg2l_cru_dev *cru)
+{
+ if (!video_is_registered(&cru->vdev))
+ return;
+
+ v4l2_info(&cru->v4l2_dev, "Removed %s\n",
+ video_device_node_name(&cru->vdev));
+
+ /* Checks internally if vdev have been init or not */
+ video_unregister_device(&cru->vdev);
+}
+
+static void rzg2l_cru_notify(struct v4l2_subdev *sd,
+ unsigned int notification, void *arg)
+{
+ struct rzg2l_cru_dev *cru =
+ container_of(sd->v4l2_dev, struct rzg2l_cru_dev, v4l2_dev);
+ struct v4l2_subdev *remote;
+ struct media_pad *pad;
+
+ pad = media_entity_remote_pad(&cru->pad);
+ if (!pad)
+ return;
+
+ remote = media_entity_to_v4l2_subdev(pad->entity);
+ if (remote != sd)
+ return;
+
+ switch (notification) {
+ case V4L2_DEVICE_NOTIFY_EVENT:
+ v4l2_event_queue(&cru->vdev, arg);
+ break;
+ }
+}
+
+int rzg2l_cru_v4l2_register(struct rzg2l_cru_dev *cru)
+{
+ struct video_device *vdev = &cru->vdev;
+ int ret;
+
+ cru->v4l2_dev.notify = rzg2l_cru_notify;
+
+ /* video node */
+ vdev->v4l2_dev = &cru->v4l2_dev;
+ vdev->queue = &cru->queue;
+ snprintf(vdev->name, sizeof(vdev->name), "CRU output");
+ vdev->release = video_device_release_empty;
+ vdev->lock = &cru->lock;
+ vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
+ V4L2_CAP_READWRITE;
+
+ /* Set a default format */
+ cru->format.pixelformat = RZG2L_CRU_DEFAULT_FORMAT;
+ cru->format.width = RZG2L_CRU_DEFAULT_WIDTH;
+ cru->format.height = RZG2L_CRU_DEFAULT_HEIGHT;
+ cru->format.field = RZG2L_CRU_DEFAULT_FIELD;
+ cru->format.colorspace = RZG2L_CRU_DEFAULT_COLORSPACE;
+
+ vdev->device_caps |= V4L2_CAP_IO_MC;
+ vdev->fops = &rzg2l_cru_fops;
+ vdev->ioctl_ops = &rzg2l_cru_ioctl_ops;
+
+ rzg2l_cru_format_align(cru, &cru->format);
+
+ ret = video_register_device(&cru->vdev, VFL_TYPE_VIDEO, -1);
+ if (ret) {
+ dev_err(cru->dev, "Failed to register video device\n");
+ return ret;
+ }
+
+ video_set_drvdata(&cru->vdev, cru);
+
+ v4l2_info(&cru->v4l2_dev, "Device registered as %s\n",
+ video_device_node_name(&cru->vdev));
+
+ return ret;
+}
--
2.17.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [RFC PATCH v2 4/4] media: platform: Add Renesas RZ/G2L MIPI CSI-2 receiver driver
2022-01-21 1:05 [RFC PATCH v2 0/4] Add driver for Renesas RZ/G2L CRU module Lad Prabhakar
` (2 preceding siblings ...)
2022-01-21 1:05 ` [RFC PATCH v2 3/4] media: platform: Add CRU driver for RZ/G2L SoC Lad Prabhakar
@ 2022-01-21 1:05 ` Lad Prabhakar
3 siblings, 0 replies; 17+ messages in thread
From: Lad Prabhakar @ 2022-01-21 1:05 UTC (permalink / raw)
To: Niklas Söderlund, Jacopo Mondi, Philipp Zabel,
Mauro Carvalho Chehab, Rob Herring, Laurent Pinchart,
Sakari Ailus, Hans Verkuil
Cc: Geert Uytterhoeven, linux-media, linux-renesas-soc, devicetree,
linux-kernel, Prabhakar, Biju Das, Lad Prabhakar
Add MIPI CSI-2 receiver driver for Renesas RZ/G2L. The MIPI
CSI-2 is part of the CRU module found on RZ/G2L family.
Based on a patch in the BSP by Hien Huynh
<hien.huynh.px@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
Hi Laurent,
The CSI subdev uses multistream and subdev state patches. Only pending thing
is the driver implements multiple pads for VC's (which should be only one)
Im working on the ov5645 sensor to use multistream to support VC's.
For the next non-RFC version I'll implement as single pad for all VC's.
Cheers,
Prabhakar
v1->v2
* new patch (split up as new driver compared to v1)
---
.../media/platform/renesas/rzg2l-cru/Kconfig | 13 +
.../media/platform/renesas/rzg2l-cru/Makefile | 1 +
.../platform/renesas/rzg2l-cru/rzg2l-csi2.c | 928 ++++++++++++++++++
3 files changed, 942 insertions(+)
create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c
diff --git a/drivers/media/platform/renesas/rzg2l-cru/Kconfig b/drivers/media/platform/renesas/rzg2l-cru/Kconfig
index 310baa4d4c14..91a9617b44ec 100644
--- a/drivers/media/platform/renesas/rzg2l-cru/Kconfig
+++ b/drivers/media/platform/renesas/rzg2l-cru/Kconfig
@@ -1,4 +1,17 @@
# SPDX-License-Identifier: GPL-2.0
+config VIDEO_RZG2L_CSI2
+ tristate "RZ/G2L MIPI CSI-2 Receiver"
+ depends on VIDEO_V4L2 && OF
+ depends on ARCH_RENESAS || COMPILE_TEST
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select RESET_CONTROLLER
+ select V4L2_FWNODE
+ help
+ Support for Renesas RZ/G2L MIPI CSI-2 Receiver driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rzg2l-csi2.
config VIDEO_RZG2L_CRU
tristate "RZ/G2L Camera Receiving Unit (CRU) Driver"
diff --git a/drivers/media/platform/renesas/rzg2l-cru/Makefile b/drivers/media/platform/renesas/rzg2l-cru/Makefile
index 8c307075f131..8cb4f4550df9 100644
--- a/drivers/media/platform/renesas/rzg2l-cru/Makefile
+++ b/drivers/media/platform/renesas/rzg2l-cru/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
rzg2l-cru-objs = rzg2l-core.o rzg2l-dma.o rzg2l-v4l2.o
+obj-$(CONFIG_VIDEO_RZG2L_CSI2) += rzg2l-csi2.o
obj-$(CONFIG_VIDEO_RZG2L_CRU) += rzg2l-cru.o
diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c
new file mode 100644
index 000000000000..ae27c9504c50
--- /dev/null
+++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c
@@ -0,0 +1,928 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for Renesas RZ/G2L MIPI CSI-2 Receiver
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/sys_soc.h>
+#include <linux/units.h>
+
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-mc.h>
+#include <media/v4l2-subdev.h>
+
+/* LINK registers */
+/* Module Configuration Register */
+#define CSI2nMCG 0x0
+#define CSI2nMCG_SDLN GENMASK(11, 8)
+
+/* Module Control Register 0 */
+#define CSI2nMCT0 0x10
+#define CSI2nMCT0_VDLN(x) ((x) << 0)
+
+/* Module Control Register 2 */
+#define CSI2nMCT2 0x18
+#define CSI2nMCT2_FRRSKW(x) ((x) << 16)
+#define CSI2nMCT2_FRRCLK(x) ((x) << 0)
+
+/* Module Control Register 3 */
+#define CSI2nMCT3 0x1c
+#define CSI2nMCT3_RXEN BIT(0)
+
+/* Reset Control Register */
+#define CSI2nRTCT 0x28
+#define CSI2nRTCT_VSRST BIT(0)
+
+/* Reset Status Register */
+#define CSI2nRTST 0x2c
+#define CSI2nRTST_VSRSTS BIT(0)
+
+/* Receive Data Type Enable Low Register */
+#define CSI2nDTEL 0x60
+
+/* Receive Data Type Enable High Register */
+#define CSI2nDTEH 0x64
+
+/* DPHY registers */
+/* D-PHY Control Register 0 */
+#define CSIDPHYCTRL0 0x400
+#define CSIDPHYCTRL0_EN_LDO1200 BIT(1)
+#define CSIDPHYCTRL0_EN_BGR BIT(0)
+
+/* D-PHY Timing Register 0 */
+#define CSIDPHYTIM0 0x404
+#define CSIDPHYTIM0_TCLK_MISS(x) ((x) << 24)
+#define CSIDPHYTIM0_T_INIT(x) ((x) << 0)
+
+/* D-PHY Timing Register 1 */
+#define CSIDPHYTIM1 0x408
+#define CSIDPHYTIM1_THS_PREPARE(x) ((x) << 24)
+#define CSIDPHYTIM1_TCLK_PREPARE(x) ((x) << 16)
+#define CSIDPHYTIM1_THS_SETTLE(x) ((x) << 8)
+
+#define VSRSTS_TIMEOUT_MS 100
+#define VSRSTS_RETRIES 20
+
+struct timings {
+ u32 t_init;
+ u32 tclk_miss;
+ u32 tclk_settle;
+ u32 ths_settle;
+ u32 tclk_prepare;
+ u32 ths_prepare;
+};
+
+enum dphy_timings {
+ TRANSMISSION_RATE_80_MBPS = 0,
+ TRANSMISSION_RATE_125_MBPS,
+ TRANSMISSION_RATE_250_MBPS,
+ TRANSMISSION_RATE_360_MBPS,
+ TRANSMISSION_RATE_360_PLUS_MBPS,
+};
+
+static const struct timings global_timings[] = {
+ [TRANSMISSION_RATE_80_MBPS] = {
+ .t_init = 79801,
+ .tclk_miss = 4,
+ .tclk_settle = 23,
+ .ths_settle = 31,
+ .tclk_prepare = 10,
+ .ths_prepare = 19,
+ },
+ [TRANSMISSION_RATE_125_MBPS] = {
+ .t_init = 79801,
+ .tclk_miss = 4,
+ .tclk_settle = 23,
+ .ths_settle = 28,
+ .tclk_prepare = 10,
+ .ths_prepare = 19,
+ },
+ [TRANSMISSION_RATE_250_MBPS] = {
+ .t_init = 79801,
+ .tclk_miss = 4,
+ .tclk_settle = 23,
+ .ths_settle = 22,
+ .tclk_prepare = 10,
+ .ths_prepare = 16,
+ },
+ [TRANSMISSION_RATE_360_MBPS] = {
+ .t_init = 79801,
+ .tclk_miss = 4,
+ .tclk_settle = 18,
+ .ths_settle = 19,
+ .tclk_prepare = 10,
+ .ths_prepare = 10,
+ },
+ [TRANSMISSION_RATE_360_PLUS_MBPS] = {
+ .t_init = 79801,
+ .tclk_miss = 4,
+ .tclk_settle = 18,
+ .ths_settle = 18,
+ .tclk_prepare = 10,
+ .ths_prepare = 10,
+ },
+};
+
+struct rzg2l_csi2_format {
+ u32 code;
+ unsigned int datatype;
+ unsigned int bpp;
+};
+
+static const struct rzg2l_csi2_format rzg2l_csi2_formats[] = {
+ { .code = MEDIA_BUS_FMT_UYVY8_2X8, .datatype = 0x1e, .bpp = 16 },
+};
+
+static const struct rzg2l_csi2_format *rzg2l_csi2_code_to_fmt(unsigned int code)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(rzg2l_csi2_formats); i++)
+ if (rzg2l_csi2_formats[i].code == code)
+ return &rzg2l_csi2_formats[i];
+
+ return NULL;
+}
+
+static const struct rzg2l_csi2_format *rzg2l_csi2_datatype_to_fmt(unsigned int dt)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(rzg2l_csi2_formats); i++)
+ if (rzg2l_csi2_formats[i].datatype == dt)
+ return &rzg2l_csi2_formats[i];
+
+ return NULL;
+}
+
+enum rzg2l_csi2_pads {
+ RZG2L_CSI2_SINK = 0,
+ RZG2L_CSI2_SOURCE_VC0,
+ RZG2L_CSI2_SOURCE_VC1,
+ RZG2L_CSI2_SOURCE_VC2,
+ RZG2L_CSI2_SOURCE_VC3,
+ NR_OF_RZG2L_CSI2_PAD,
+};
+
+struct rzg2l_csi2 {
+ struct device *dev;
+ void __iomem *base;
+ struct reset_control *rstc;
+ unsigned long vclk_rate;
+
+ struct v4l2_subdev subdev;
+ struct media_pad pads[NR_OF_RZG2L_CSI2_PAD];
+
+ struct v4l2_async_notifier notifier;
+ struct v4l2_async_subdev asd;
+ struct v4l2_subdev *remote;
+
+ struct mutex lock;
+ int stream_count;
+
+ unsigned short lanes;
+
+ unsigned long hsfreq;
+};
+
+static inline struct rzg2l_csi2 *sd_to_csi2(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct rzg2l_csi2, subdev);
+}
+
+static inline struct rzg2l_csi2 *notifier_to_csi2(struct v4l2_async_notifier *n)
+{
+ return container_of(n, struct rzg2l_csi2, notifier);
+}
+
+static u32 rzg2l_csi2_read(struct rzg2l_csi2 *csi2, unsigned int reg)
+{
+ return ioread32(csi2->base + reg);
+}
+
+static void rzg2l_csi2_write(struct rzg2l_csi2 *csi2, unsigned int reg,
+ u32 data)
+{
+ iowrite32(data, csi2->base + reg);
+}
+
+static void rzg2l_csi2_set(struct rzg2l_csi2 *csi2, unsigned int reg, u32 set)
+{
+ rzg2l_csi2_write(csi2, reg, rzg2l_csi2_read(csi2, reg) | set);
+}
+
+static void rzg2l_csi2_clr(struct rzg2l_csi2 *csi2, unsigned int reg, u32 clr)
+{
+ rzg2l_csi2_write(csi2, reg, rzg2l_csi2_read(csi2, reg) & ~clr);
+}
+
+/* -----------------------------------------------------------------------------
+ * DPHY setting
+ */
+
+static int rzg2l_csi2_dphy_setting(struct rzg2l_csi2 *csi2, bool on)
+{
+ int ret = 0;
+
+ if (on) {
+ struct timings dphy_timing;
+ u32 dphytim0, dphytim1;
+
+ /* Release reset state */
+ ret = reset_control_deassert(csi2->rstc);
+ if (ret)
+ return ret;
+
+ /* Wait until the power stabilizes */
+ mdelay(1);
+
+ /* Set DPHY timing parameters */
+ if (csi2->hsfreq <= 80)
+ dphy_timing = global_timings[TRANSMISSION_RATE_80_MBPS];
+ else if (csi2->hsfreq > 80 && csi2->hsfreq <= 125)
+ dphy_timing = global_timings[TRANSMISSION_RATE_125_MBPS];
+ else if (csi2->hsfreq > 125 && csi2->hsfreq <= 250)
+ dphy_timing = global_timings[TRANSMISSION_RATE_250_MBPS];
+ else if (csi2->hsfreq > 250 && csi2->hsfreq <= 360)
+ dphy_timing = global_timings[TRANSMISSION_RATE_360_MBPS];
+ else if (csi2->hsfreq > 360 && csi2->hsfreq <= 1500)
+ dphy_timing = global_timings[TRANSMISSION_RATE_360_PLUS_MBPS];
+ else
+ return -EINVAL;
+
+ dphytim0 = CSIDPHYTIM0_TCLK_MISS(dphy_timing.tclk_miss) |
+ CSIDPHYTIM0_T_INIT(dphy_timing.t_init);
+ dphytim1 = CSIDPHYTIM1_THS_PREPARE(dphy_timing.ths_prepare) |
+ CSIDPHYTIM1_TCLK_PREPARE(dphy_timing.tclk_prepare) |
+ CSIDPHYTIM1_THS_SETTLE(dphy_timing.ths_settle) |
+ CSIDPHYTIM1_THS_SETTLE(dphy_timing.tclk_settle);
+
+ rzg2l_csi2_write(csi2, CSIDPHYTIM0, dphytim0);
+ rzg2l_csi2_write(csi2, CSIDPHYTIM1, dphytim1);
+
+ /* Set the EN_BGR bit */
+ rzg2l_csi2_set(csi2, CSIDPHYCTRL0, CSIDPHYCTRL0_EN_BGR);
+
+ /* Delay 20us to be stable */
+ usleep_range(20, 40);
+
+ /* Set the EN_LDO1200 bit */
+ rzg2l_csi2_set(csi2, CSIDPHYCTRL0, CSIDPHYCTRL0_EN_LDO1200);
+
+ /* Delay 10us to be stable */
+ usleep_range(10, 20);
+ } else {
+ /* Cancel the EN_LDO1200 register setting */
+ rzg2l_csi2_clr(csi2, CSIDPHYCTRL0, CSIDPHYCTRL0_EN_LDO1200);
+
+ /* Cancel the EN_BGR register setting */
+ rzg2l_csi2_clr(csi2, CSIDPHYCTRL0, CSIDPHYCTRL0_EN_BGR);
+
+ /* Set reset state */
+ reset_control_assert(csi2->rstc);
+ }
+
+ return ret;
+}
+
+static int rzg2l_csi2_calc_mbps(struct rzg2l_csi2 *csi2,
+ struct v4l2_mbus_frame_desc *fd,
+ unsigned int lanes)
+{
+ const struct v4l2_mbus_frame_desc_entry_csi2 *csi2_desc;
+ const struct rzg2l_csi2_format *format;
+ struct v4l2_subdev *source;
+ struct v4l2_ctrl *ctrl;
+ unsigned int i;
+ u64 mbps;
+
+ if (!csi2->remote)
+ return -ENODEV;
+
+ source = csi2->remote;
+
+ /* Read the pixel rate control from remote. */
+ ctrl = v4l2_ctrl_find(source->ctrl_handler, V4L2_CID_PIXEL_RATE);
+ if (!ctrl) {
+ dev_err(csi2->dev, "no pixel rate control in subdev %s\n",
+ source->name);
+ return -EINVAL;
+ }
+
+ /* Verify that all remote streams send the same datatype. */
+ csi2_desc = NULL;
+ for (i = 0; i < fd->num_entries; i++) {
+ struct v4l2_mbus_frame_desc_entry_csi2 *stream_desc;
+
+ stream_desc = &fd->entry[i].bus.csi2;
+ if (!csi2_desc)
+ csi2_desc = stream_desc;
+
+ if (csi2_desc->dt != stream_desc->dt) {
+ dev_err(csi2->dev,
+ "Remote streams with different DT: %u - %u\n",
+ csi2_desc->dt, stream_desc->dt);
+ return -EINVAL;
+ }
+ }
+ format = rzg2l_csi2_datatype_to_fmt(csi2_desc->dt);
+ if (!format)
+ return -EINVAL;
+
+ /*
+ * Calculate hsfreq in Mbps
+ * hsfreq = (pixel_rate * bits_per_sample) / number_of_lanes
+ */
+ mbps = v4l2_ctrl_g_ctrl_int64(ctrl) * format->bpp;
+ do_div(mbps, csi2->lanes * 1000000);
+
+ return mbps;
+}
+
+static void rzg2l_csi2_stop(struct rzg2l_csi2 *csi2)
+{
+ unsigned int timeout = VSRSTS_RETRIES;
+
+ /* Stop DPHY reception */
+ rzg2l_csi2_dphy_setting(csi2, 0);
+
+ /* Stop LINK reception */
+ rzg2l_csi2_clr(csi2, CSI2nMCT3, CSI2nMCT3_RXEN);
+
+ /* Request a software reset of the LINK Video Pixel Interface */
+ rzg2l_csi2_write(csi2, CSI2nRTCT, CSI2nRTCT_VSRST);
+
+ while (timeout--) {
+ /* Make sure that the execution status is not during a reset */
+ if (!(rzg2l_csi2_read(csi2, CSI2nRTST) & CSI2nRTST_VSRSTS))
+ break;
+ msleep(VSRSTS_TIMEOUT_MS);
+ };
+ if (!timeout)
+ dev_err(csi2->dev, "CSI2nRTCT_VSRST bit is not cleared\n");
+}
+
+static int rzg2l_csi2_get_remote_frame_desc(struct rzg2l_csi2 *csi2,
+ struct v4l2_mbus_frame_desc *fd)
+{
+ struct media_pad *pad;
+ int ret;
+
+ if (!csi2->remote)
+ return -ENODEV;
+
+ pad = media_entity_remote_pad(&csi2->pads[RZG2L_CSI2_SINK]);
+ if (!pad)
+ return -ENODEV;
+
+ ret = v4l2_subdev_call(csi2->remote, pad, get_frame_desc,
+ pad->index, fd);
+ if (ret)
+ return ret;
+
+ if (fd->type != V4L2_MBUS_FRAME_DESC_TYPE_CSI2) {
+ dev_err(csi2->dev, "Frame desc do not describe CSI-2 link");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int rzg2l_csi2_start(struct rzg2l_csi2 *csi2)
+{
+ unsigned long vclk_rate = csi2->vclk_rate / HZ_PER_MHZ;
+ u32 frrskw, frrclk, frrskw_coeff, frrclk_coeff;
+ struct v4l2_mbus_frame_desc fd;
+ int lanes, mbps, ret;
+
+ /* Get information about multiplexed link. */
+ ret = rzg2l_csi2_get_remote_frame_desc(csi2, &fd);
+ if (ret)
+ return ret;
+
+ /* Checking the maximum lanes support for CSI-2 module */
+ lanes = (rzg2l_csi2_read(csi2, CSI2nMCG) & CSI2nMCG_SDLN) >> 8;
+ if (lanes < csi2->lanes) {
+ dev_err(csi2->dev,
+ "Failed to support %d data lanes\n", csi2->lanes);
+ return -EINVAL;
+ }
+
+ mbps = rzg2l_csi2_calc_mbps(csi2, &fd, lanes);
+ if (mbps < 0)
+ return mbps;
+
+ csi2->hsfreq = mbps;
+
+ /* Initialize DPHY */
+ ret = rzg2l_csi2_dphy_setting(csi2, 1);
+ if (ret) {
+ rzg2l_csi2_dphy_setting(csi2, 0);
+ return ret;
+ }
+
+ rzg2l_csi2_write(csi2, CSI2nMCT0, CSI2nMCT0_VDLN(csi2->lanes));
+
+ frrskw_coeff = 3 * vclk_rate * 8;
+ frrclk_coeff = frrskw_coeff / 2;
+ frrskw = DIV_ROUND_UP(frrskw_coeff, csi2->hsfreq);
+ frrclk = DIV_ROUND_UP(frrclk_coeff, csi2->hsfreq);
+ rzg2l_csi2_write(csi2, CSI2nMCT2,
+ CSI2nMCT2_FRRSKW(frrskw) | CSI2nMCT2_FRRCLK(frrclk));
+
+ /* Select data type. */
+ rzg2l_csi2_write(csi2, CSI2nDTEL, 0xf778ff0f);
+ rzg2l_csi2_write(csi2, CSI2nDTEH, 0x00ffff1f);
+
+ /* Enable LINK reception */
+ rzg2l_csi2_set(csi2, CSI2nMCT3, CSI2nMCT3_RXEN);
+
+ return 0;
+}
+
+static int rzg2l_csi2_s_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct rzg2l_csi2 *csi2 = sd_to_csi2(sd);
+ int ret = 0;
+
+ mutex_lock(&csi2->lock);
+
+ if (!csi2->remote) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ if (enable && !csi2->stream_count) {
+ pm_runtime_get_sync(csi2->dev);
+
+ ret = rzg2l_csi2_start(csi2);
+ if (ret) {
+ pm_runtime_put(csi2->dev);
+ goto out;
+ }
+
+ ret = v4l2_subdev_call(csi2->remote, video, s_stream, 1);
+ if (ret) {
+ rzg2l_csi2_stop(csi2);
+ pm_runtime_put(csi2->dev);
+ goto out;
+ }
+ } else if (!enable && csi2->stream_count == 1) {
+ v4l2_subdev_call(csi2->remote, video, s_stream, 0);
+ rzg2l_csi2_stop(csi2);
+ pm_runtime_put(csi2->dev);
+ }
+
+ csi2->stream_count += enable ? 1 : -1;
+out:
+ mutex_unlock(&csi2->lock);
+
+ return ret;
+}
+
+static int rzg2l_csi2_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad,
+ struct v4l2_mbus_frame_desc *fd)
+{
+ struct v4l2_subdev_state *state;
+ struct v4l2_subdev_route *route;
+ int ret = 0;
+
+ if (pad < RZG2L_CSI2_SOURCE_VC0 || pad > RZG2L_CSI2_SOURCE_VC3)
+ return -EINVAL;
+
+ state = v4l2_subdev_lock_active_state(sd);
+
+ memset(fd, 0, sizeof(*fd));
+
+ for_each_active_route(&state->routing, route) {
+ const struct rzg2l_csi2_format *csi2_fmt;
+ struct v4l2_mbus_framefmt *fmt;
+
+ if (route->source_pad != pad)
+ continue;
+
+ fmt = v4l2_state_get_stream_format(state, pad,
+ route->source_stream);
+ if (!fmt) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ csi2_fmt = rzg2l_csi2_code_to_fmt(fmt->code);
+
+ /* Only one stream per 'channel' is allowed. */
+ fd->entry[0].pixelcode = fmt->code;
+ fd->entry[0].length = fmt->width * fmt->height * csi2_fmt->bpp / 8;
+ fd->entry[0].flags = V4L2_MBUS_FRAME_DESC_FL_LEN_MAX;
+
+ /*
+ * The sink stream id corresponds to the CSI-2 Virtual Channel
+ * which is output on the channel identified by the current
+ * source pad.
+ */
+ fd->entry[0].bus.csi2.vc = route->sink_stream;
+ fd->entry[0].bus.csi2.dt = csi2_fmt->datatype;
+
+ fd->num_entries = 1;
+
+ break;
+ }
+
+ fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2;
+
+out:
+ v4l2_subdev_unlock_state(state);
+
+ return ret;
+}
+
+static int _rzg2l_csi2_set_routing(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state,
+ struct v4l2_subdev_krouting *routing)
+{
+ int ret;
+
+ ret = v4l2_subdev_routing_validate_1_to_1(routing);
+ if (ret)
+ return ret;
+
+ v4l2_subdev_lock_state(state);
+
+ ret = v4l2_subdev_set_routing(sd, state, routing);
+
+ v4l2_subdev_unlock_state(state);
+
+ return ret;
+}
+
+static int rzg2l_csi2_set_routing(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state,
+ enum v4l2_subdev_format_whence which,
+ struct v4l2_subdev_krouting *routing)
+{
+ return _rzg2l_csi2_set_routing(sd, state, routing);
+}
+
+static int rzg2l_csi2_init_config(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state)
+{
+ /* One route for each virtual channel. Route 0 enabled by default. */
+ struct v4l2_subdev_route routes[] = {
+ {
+ .sink_pad = RZG2L_CSI2_SINK,
+ .sink_stream = 0,
+ .source_pad = RZG2L_CSI2_SOURCE_VC0,
+ .source_stream = 0,
+ .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE,
+ },
+ {
+ .sink_pad = RZG2L_CSI2_SINK,
+ .sink_stream = 1,
+ .source_pad = RZG2L_CSI2_SOURCE_VC1,
+ .source_stream = 0,
+ .flags = 0,
+ },
+ {
+ .sink_pad = RZG2L_CSI2_SINK,
+ .sink_stream = 2,
+ .source_pad = RZG2L_CSI2_SOURCE_VC2,
+ .source_stream = 2,
+ .flags = 0,
+ },
+ {
+ .sink_pad = RZG2L_CSI2_SINK,
+ .sink_stream = 3,
+ .source_pad = RZG2L_CSI2_SOURCE_VC3,
+ .source_stream = 0,
+ .flags = 0,
+ },
+ };
+ struct v4l2_subdev_krouting routing = {
+ .num_routes = ARRAY_SIZE(routes),
+ .routes = routes,
+ };
+
+ return _rzg2l_csi2_set_routing(sd, state, &routing);
+}
+
+static int rzg2l_csi2_set_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state,
+ struct v4l2_subdev_format *format)
+{
+ struct v4l2_mbus_framefmt *fmt;
+ int ret = 0;
+
+ if (!rzg2l_csi2_code_to_fmt(format->format.code))
+ format->format.code = rzg2l_csi2_formats[0].code;
+
+ /*
+ * Format is propagated from sink streams to source streams, so
+ * disallow setting format on the source pads.
+ */
+ if (format->pad > RZG2L_CSI2_SINK)
+ return -EINVAL;
+
+ v4l2_subdev_lock_state(state);
+
+ fmt = v4l2_state_get_stream_format(state, format->pad,
+ format->stream);
+ if (!fmt) {
+ ret = -EINVAL;
+ goto out;
+ }
+ *fmt = format->format;
+
+ /* Propagate format to the other end of the route. */
+ fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad,
+ format->stream);
+ if (!fmt) {
+ ret = -EINVAL;
+ goto out;
+ }
+ *fmt = format->format;
+
+out:
+ v4l2_subdev_unlock_state(state);
+
+ return ret;
+}
+
+static const struct v4l2_subdev_video_ops rzg2l_csi2_video_ops = {
+ .s_stream = rzg2l_csi2_s_stream,
+};
+
+static const struct v4l2_subdev_pad_ops rzg2l_csi2_pad_ops = {
+ .init_cfg = rzg2l_csi2_init_config,
+ .set_fmt = rzg2l_csi2_set_format,
+ .get_fmt = v4l2_subdev_get_fmt,
+ .get_frame_desc = rzg2l_csi2_get_frame_desc,
+ .set_routing = rzg2l_csi2_set_routing,
+};
+
+static const struct v4l2_subdev_ops rzg2l_csi2_subdev_ops = {
+ .video = &rzg2l_csi2_video_ops,
+ .pad = &rzg2l_csi2_pad_ops,
+};
+
+/* -----------------------------------------------------------------------------
+ * Async handling and registration of subdevices and links.
+ */
+
+static int rzg2l_csi2_notify_bound(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+{
+ struct rzg2l_csi2 *csi2 = notifier_to_csi2(notifier);
+ int pad;
+
+ if (!v4l2_subdev_has_op(subdev, pad, get_frame_desc)) {
+ dev_err(csi2->dev,
+ "Subdev %s bound failed: missing get_frame_desc()\n",
+ subdev->name);
+ return -EINVAL;
+ }
+
+ pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
+ MEDIA_PAD_FL_SOURCE);
+ if (pad < 0) {
+ dev_err(csi2->dev, "Failed to find pad for %s\n", subdev->name);
+ return pad;
+ }
+
+ csi2->remote = subdev;
+
+ dev_dbg(csi2->dev, "Bound %s pad: %d\n", subdev->name, pad);
+
+ return media_create_pad_link(&subdev->entity, pad,
+ &csi2->subdev.entity, 0,
+ MEDIA_LNK_FL_ENABLED |
+ MEDIA_LNK_FL_IMMUTABLE);
+}
+
+static void rzg2l_csi2_notify_unbind(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+{
+ struct rzg2l_csi2 *csi2 = notifier_to_csi2(notifier);
+
+ csi2->remote = NULL;
+
+ dev_dbg(csi2->dev, "Unbind %s\n", subdev->name);
+}
+
+static const struct v4l2_async_notifier_operations rzg2l_csi2_notify_ops = {
+ .bound = rzg2l_csi2_notify_bound,
+ .unbind = rzg2l_csi2_notify_unbind,
+};
+
+static int rzg2l_csi2_parse_v4l2(struct rzg2l_csi2 *csi2,
+ struct v4l2_fwnode_endpoint *vep)
+{
+ /* Only port 0 endpoint 0 is valid. */
+ if (vep->base.port || vep->base.id)
+ return -ENOTCONN;
+
+ if (vep->bus_type != V4L2_MBUS_CSI2_DPHY) {
+ dev_err(csi2->dev, "Unsupported bus: %u\n", vep->bus_type);
+ return -EINVAL;
+ }
+
+ csi2->lanes = vep->bus.mipi_csi2.num_data_lanes;
+ if (csi2->lanes != 1 && csi2->lanes != 2 && csi2->lanes != 4) {
+ dev_err(csi2->dev, "Unsupported number of data-lanes: %u\n",
+ csi2->lanes);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int rzg2l_csi2_parse_dt(struct rzg2l_csi2 *csi2)
+{
+ struct v4l2_fwnode_endpoint v4l2_ep = {
+ .bus_type = V4L2_MBUS_CSI2_DPHY
+ };
+ struct v4l2_async_subdev *asd;
+ struct fwnode_handle *fwnode;
+ struct fwnode_handle *ep;
+ int ret;
+
+ ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(csi2->dev), 0, 0, 0);
+ if (!ep) {
+ dev_err(csi2->dev, "Not connected to subdevice\n");
+ return -EINVAL;
+ }
+
+ ret = v4l2_fwnode_endpoint_parse(ep, &v4l2_ep);
+ if (ret) {
+ dev_err(csi2->dev, "Could not parse v4l2 endpoint\n");
+ fwnode_handle_put(ep);
+ return -EINVAL;
+ }
+
+ ret = rzg2l_csi2_parse_v4l2(csi2, &v4l2_ep);
+ if (ret) {
+ fwnode_handle_put(ep);
+ return ret;
+ }
+
+ fwnode = fwnode_graph_get_remote_endpoint(ep);
+ fwnode_handle_put(ep);
+
+ dev_dbg(csi2->dev, "Found '%pOF'\n", to_of_node(fwnode));
+
+ v4l2_async_nf_init(&csi2->notifier);
+ csi2->notifier.ops = &rzg2l_csi2_notify_ops;
+
+ asd = v4l2_async_nf_add_fwnode(&csi2->notifier, fwnode,
+ struct v4l2_async_subdev);
+ fwnode_handle_put(fwnode);
+ if (IS_ERR(asd))
+ return PTR_ERR(asd);
+
+ ret = v4l2_async_subdev_nf_register(&csi2->subdev, &csi2->notifier);
+ if (ret)
+ v4l2_async_nf_cleanup(&csi2->notifier);
+
+ return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * Platform Device Driver.
+ */
+
+static const struct media_entity_operations rzg2l_csi2_entity_ops = {
+ .link_validate = v4l2_subdev_link_validate,
+};
+
+static int rzg2l_csi2_probe(struct platform_device *pdev)
+{
+ struct rzg2l_csi2 *csi2;
+ struct clk *vclk;
+ unsigned int i;
+ int ret;
+
+ csi2 = devm_kzalloc(&pdev->dev, sizeof(*csi2), GFP_KERNEL);
+ if (!csi2)
+ return -ENOMEM;
+
+ csi2->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(csi2->base))
+ return PTR_ERR(csi2->base);
+
+ csi2->rstc = devm_reset_control_get(&pdev->dev, "cmn-rstb");
+ if (IS_ERR(csi2->rstc))
+ return dev_err_probe(&pdev->dev, PTR_ERR(csi2->rstc),
+ "failed to get cpg cmn-rstb\n");
+
+ vclk = devm_clk_get(&pdev->dev, "vclk");
+ if (IS_ERR(vclk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(vclk),
+ "failed to get vclk clock\n");
+
+ csi2->vclk_rate = clk_get_rate(vclk);
+ devm_clk_put(&pdev->dev, vclk);
+
+ csi2->dev = &pdev->dev;
+ mutex_init(&csi2->lock);
+ csi2->stream_count = 0;
+
+ platform_set_drvdata(pdev, csi2);
+
+ ret = rzg2l_csi2_parse_dt(csi2);
+ if (ret)
+ goto error_mutex;
+
+ csi2->subdev.owner = THIS_MODULE;
+ csi2->subdev.dev = &pdev->dev;
+ v4l2_subdev_init(&csi2->subdev, &rzg2l_csi2_subdev_ops);
+ v4l2_set_subdevdata(&csi2->subdev, &pdev->dev);
+ snprintf(csi2->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s %s",
+ KBUILD_MODNAME, dev_name(&pdev->dev));
+ csi2->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_MULTIPLEXED;
+
+ csi2->subdev.entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
+ csi2->subdev.entity.ops = &rzg2l_csi2_entity_ops;
+
+ csi2->pads[RZG2L_CSI2_SINK].flags = MEDIA_PAD_FL_SINK;
+ for (i = RZG2L_CSI2_SOURCE_VC0; i < NR_OF_RZG2L_CSI2_PAD; i++)
+ csi2->pads[i].flags = MEDIA_PAD_FL_SOURCE;
+
+ ret = media_entity_pads_init(&csi2->subdev.entity, NR_OF_RZG2L_CSI2_PAD, csi2->pads);
+ if (ret)
+ goto error_async;
+
+ pm_runtime_enable(&pdev->dev);
+
+ ret = v4l2_subdev_init_finalize(&csi2->subdev);
+ if (ret < 0)
+ goto error_pm;
+
+ ret = v4l2_async_register_subdev(&csi2->subdev);
+ if (ret < 0)
+ goto error_subdev;
+
+ dev_info(csi2->dev, "%d lanes found\n", csi2->lanes);
+
+ return 0;
+
+error_subdev:
+ v4l2_subdev_cleanup(&csi2->subdev);
+error_pm:
+ pm_runtime_disable(&pdev->dev);
+error_async:
+ v4l2_async_nf_unregister(&csi2->notifier);
+ v4l2_async_nf_cleanup(&csi2->notifier);
+error_mutex:
+ mutex_destroy(&csi2->lock);
+
+ return ret;
+}
+
+static const struct of_device_id rzg2l_csi2_of_table[] = {
+ { .compatible = "renesas,rzg2l-csi2", },
+ { /* sentinel */ }
+};
+
+static int rzg2l_csi2_remove(struct platform_device *pdev)
+{
+ struct rzg2l_csi2 *csi2 = platform_get_drvdata(pdev);
+
+ v4l2_async_nf_unregister(&csi2->notifier);
+ v4l2_async_nf_cleanup(&csi2->notifier);
+ v4l2_async_unregister_subdev(&csi2->subdev);
+ v4l2_subdev_cleanup(&csi2->subdev);
+
+ pm_runtime_disable(&pdev->dev);
+ mutex_destroy(&csi2->lock);
+
+ return 0;
+}
+
+static struct platform_driver rzg2l_csi2_pdrv = {
+ .remove = rzg2l_csi2_remove,
+ .probe = rzg2l_csi2_probe,
+ .driver = {
+ .name = "rzg2l-csi2",
+ .of_match_table = rzg2l_csi2_of_table,
+ },
+};
+
+module_platform_driver(rzg2l_csi2_pdrv);
+
+MODULE_DESCRIPTION("Renesas RZG2L MIPI CSI2 receiver driver");
+MODULE_LICENSE("GPL");
--
2.17.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [RFC PATCH v2 1/4] media: dt-bindings: media: Document RZ/G2L CSI-2 block
2022-01-21 1:05 ` [RFC PATCH v2 1/4] media: dt-bindings: media: Document RZ/G2L CSI-2 block Lad Prabhakar
@ 2022-01-21 9:26 ` Geert Uytterhoeven
2022-01-21 11:52 ` Lad, Prabhakar
2022-02-15 13:01 ` Jacopo Mondi
1 sibling, 1 reply; 17+ messages in thread
From: Geert Uytterhoeven @ 2022-01-21 9:26 UTC (permalink / raw)
To: Lad Prabhakar
Cc: Niklas Söderlund, Jacopo Mondi, Philipp Zabel,
Mauro Carvalho Chehab, Rob Herring, Laurent Pinchart,
Sakari Ailus, Hans Verkuil, Linux Media Mailing List,
Linux-Renesas,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Linux Kernel Mailing List, Prabhakar, Biju Das
Hi Prabhakar,
On Fri, Jan 21, 2022 at 2:06 AM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> Document the CSI-2 block which is part of CRU found in Renesas
> RZ/G2L SoC.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Thanks for your patch!
> ---
> Hi Geert/All,
>
> vclk and pclk clocks are shared with CRU both CSI and CRU driver are using
> pm_runtime. pclk clock is necessary for register access where as vclk clock
> is only used for calculations. So would you suggest passing vclk as part of
What do you mean by "calculations"?
The bindings say this is the main clock?
> clocks (as currently implemented) or pass the vclk clock rate as a dt property.
Please do not specify clock rates in DT, but always pass clock
specifiers instead.
The clock subsystem handles sharing of clocks just fine.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [RFC PATCH v2 1/4] media: dt-bindings: media: Document RZ/G2L CSI-2 block
2022-01-21 9:26 ` Geert Uytterhoeven
@ 2022-01-21 11:52 ` Lad, Prabhakar
2022-01-21 12:06 ` Geert Uytterhoeven
0 siblings, 1 reply; 17+ messages in thread
From: Lad, Prabhakar @ 2022-01-21 11:52 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Lad Prabhakar, Niklas Söderlund, Jacopo Mondi,
Philipp Zabel, Mauro Carvalho Chehab, Rob Herring,
Laurent Pinchart, Sakari Ailus, Hans Verkuil,
Linux Media Mailing List, Linux-Renesas,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Linux Kernel Mailing List, Biju Das
Hi Geert,
On Fri, Jan 21, 2022 at 9:26 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
> Hi Prabhakar,
>
> On Fri, Jan 21, 2022 at 2:06 AM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> > Document the CSI-2 block which is part of CRU found in Renesas
> > RZ/G2L SoC.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> Thanks for your patch!
>
> > ---
> > Hi Geert/All,
> >
> > vclk and pclk clocks are shared with CRU both CSI and CRU driver are using
> > pm_runtime. pclk clock is necessary for register access where as vclk clock
> > is only used for calculations. So would you suggest passing vclk as part of
>
> What do you mean by "calculations"?
To set the CSI2nMCT2 register bits (FRRSKW/FRRCLK), vclk clock rate is used.
> The bindings say this is the main clock?
>
That is because the RZG2L_clock_list_r02_02.xlsx mentions it as the main clock.
> > clocks (as currently implemented) or pass the vclk clock rate as a dt property.
>
> Please do not specify clock rates in DT, but always pass clock
> specifiers instead.
> The clock subsystem handles sharing of clocks just fine.
>
Agreed.
Cheers,
Prabhakar
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [RFC PATCH v2 1/4] media: dt-bindings: media: Document RZ/G2L CSI-2 block
2022-01-21 11:52 ` Lad, Prabhakar
@ 2022-01-21 12:06 ` Geert Uytterhoeven
0 siblings, 0 replies; 17+ messages in thread
From: Geert Uytterhoeven @ 2022-01-21 12:06 UTC (permalink / raw)
To: Lad, Prabhakar
Cc: Lad Prabhakar, Niklas Söderlund, Jacopo Mondi,
Philipp Zabel, Mauro Carvalho Chehab, Rob Herring,
Laurent Pinchart, Sakari Ailus, Hans Verkuil,
Linux Media Mailing List, Linux-Renesas,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Linux Kernel Mailing List, Biju Das
Hi Prabhakar,
On Fri, Jan 21, 2022 at 12:52 PM Lad, Prabhakar
<prabhakar.csengg@gmail.com> wrote:
> On Fri, Jan 21, 2022 at 9:26 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> > On Fri, Jan 21, 2022 at 2:06 AM Lad Prabhakar
> > <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> > > Document the CSI-2 block which is part of CRU found in Renesas
> > > RZ/G2L SoC.
> > >
> > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> >
> > Thanks for your patch!
> >
> > > ---
> > > Hi Geert/All,
> > >
> > > vclk and pclk clocks are shared with CRU both CSI and CRU driver are using
> > > pm_runtime. pclk clock is necessary for register access where as vclk clock
> > > is only used for calculations. So would you suggest passing vclk as part of
> >
> > What do you mean by "calculations"?
> To set the CSI2nMCT2 register bits (FRRSKW/FRRCLK), vclk clock rate is used.
Ah, clock rate calculations. I (mis)understood that vclk clocked
a hardware calculation block, and was wondering what kind of heavy
calculations were involved ;-)
> > The bindings say this is the main clock?
> >
> That is because the RZG2L_clock_list_r02_02.xlsx mentions it as the main clock.
>
> > > clocks (as currently implemented) or pass the vclk clock rate as a dt property.
> >
> > Please do not specify clock rates in DT, but always pass clock
> > specifiers instead.
> > The clock subsystem handles sharing of clocks just fine.
> >
> Agreed.
So doing clk_get_rate() is fine.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [RFC PATCH v2 2/4] media: dt-bindings: media: Document RZ/G2L CRU
2022-01-21 1:05 ` [RFC PATCH v2 2/4] media: dt-bindings: media: Document RZ/G2L CRU Lad Prabhakar
@ 2022-02-07 22:39 ` Rob Herring
2022-03-18 20:39 ` Lad, Prabhakar
2022-02-15 13:06 ` Jacopo Mondi
1 sibling, 1 reply; 17+ messages in thread
From: Rob Herring @ 2022-02-07 22:39 UTC (permalink / raw)
To: Lad Prabhakar
Cc: Niklas Söderlund, Jacopo Mondi, Philipp Zabel,
Mauro Carvalho Chehab, Laurent Pinchart, Sakari Ailus,
Hans Verkuil, Geert Uytterhoeven, linux-media, linux-renesas-soc,
devicetree, linux-kernel, Prabhakar, Biju Das
On Fri, Jan 21, 2022 at 01:05:41AM +0000, Lad Prabhakar wrote:
> Document the CRU block found on Renesas RZ/G2L SoC's.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v1->v2
> * Dropped CSI
> ---
> .../bindings/media/renesas,rzg2l-cru.yaml | 152 ++++++++++++++++++
> 1 file changed, 152 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> new file mode 100644
> index 000000000000..a03fc6ef0117
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> @@ -0,0 +1,152 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright (C) 2022 Renesas Electronics Corp.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas RZ/G2L Camera Data Receiving Unit (CRU)
> +
> +maintainers:
> + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> +
> +description:
> + The RZ/G2L Camera Data Receiving Unit (CRU) device provides video input
> + capabilities for the Renesas RZ/G2L family of devices.
> +
> + Depending on the instance the Image Processing input is connected to
> + external SoC pins or to a CSI-2 receiver.
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
Don't need oneOf when there is only 1 entry.
> + - enum:
> + - renesas,r9a07g044-cru # RZ/G2{L,LC}
> + - const: renesas,rzg2l-cru
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 3
> +
> + interrupt-names:
> + items:
> + - const: image_conv
> + - const: image_conv_err
> + - const: axi_mst_err
> +
> + clocks:
> + items:
> + - description: CRU Main clock
> + - description: CPU Register access clock
> + - description: CRU image transfer clock
> +
> + clock-names:
> + items:
> + - const: vclk
> + - const: pclk
> + - const: aclk
> +
> + power-domains:
> + maxItems: 1
> +
> + resets:
> + items:
> + - description: CRU_PRESETN reset terminal
> + - description: CRU_ARESETN reset terminal
> +
> + reset-names:
> + items:
> + - const: presetn
> + - const: aresetn
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port node, single endpoint describing a parallel input source.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + hsync-active: true
> + vsync-active: true
> + bus-width: true
> + data-shift: true
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + Output port node, describing the RZ/G2L Image Processing module
> + connected the CSI-2 receiver
> +
> + properties:
> + endpoint@0:
> + $ref: /schemas/graph.yaml#/properties/endpoint
> + description: Endpoint connected to CSI2.
> +
> + anyOf:
> + - required:
> + - endpoint@0
You can drop all the endpoint stuff. Just 'endpoint' should be valid as
well for example. The graph schema covers all that.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - interrupt-names
> + - clocks
> + - clock-names
> + - resets
> + - reset-names
> + - power-domains
> +
> +additionalProperties: false
> +
> +examples:
> + # Device node example with CSI-2
> + - |
> + #include <dt-bindings/clock/r9a07g044-cpg.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + cru: video@10830000 {
> + compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";
> + reg = <0x10830000 0x400>;
> + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
> + clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
> + <&cpg CPG_MOD R9A07G044_CRU_PCLK>,
> + <&cpg CPG_MOD R9A07G044_CRU_ACLK>;
> + clock-names = "vclk", "pclk", "aclk";
> + power-domains = <&cpg>;
> + resets = <&cpg R9A07G044_CRU_PRESETN>,
> + <&cpg R9A07G044_CRU_ARESETN>;
> + reset-names = "presetn", "aresetn";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg = <1>;
> +
> + crucsi2: endpoint@0 {
> + reg = <0>;
> + remote-endpoint= <&csi2cru>;
> + };
> + };
> + };
> + };
> --
> 2.17.1
>
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [RFC PATCH v2 1/4] media: dt-bindings: media: Document RZ/G2L CSI-2 block
2022-01-21 1:05 ` [RFC PATCH v2 1/4] media: dt-bindings: media: Document RZ/G2L CSI-2 block Lad Prabhakar
2022-01-21 9:26 ` Geert Uytterhoeven
@ 2022-02-15 13:01 ` Jacopo Mondi
2022-03-18 16:58 ` Lad, Prabhakar
1 sibling, 1 reply; 17+ messages in thread
From: Jacopo Mondi @ 2022-02-15 13:01 UTC (permalink / raw)
To: Lad Prabhakar
Cc: Niklas Söderlund, Philipp Zabel, Mauro Carvalho Chehab,
Rob Herring, Laurent Pinchart, Sakari Ailus, Hans Verkuil,
Geert Uytterhoeven, linux-media, linux-renesas-soc, devicetree,
linux-kernel, Prabhakar, Biju Das
Hi Prabhakar
On Fri, Jan 21, 2022 at 01:05:40AM +0000, Lad Prabhakar wrote:
> Document the CSI-2 block which is part of CRU found in Renesas
> RZ/G2L SoC.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> Hi Geert/All,
>
> vclk and pclk clocks are shared with CRU both CSI and CRU driver are using
> pm_runtime. pclk clock is necessary for register access where as vclk clock
> is only used for calculations. So would you suggest passing vclk as part of
> clocks (as currently implemented) or pass the vclk clock rate as a dt property.
>
> Cheers,
> Prabhakar
>
> v1->v2
> * New patch
> ---
> .../bindings/media/renesas,rzg2l-csi2.yaml | 151 ++++++++++++++++++
> 1 file changed, 151 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> new file mode 100644
> index 000000000000..bf907768a157
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> @@ -0,0 +1,151 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright (C) 2022 Renesas Electronics Corp.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/renesas,rzg2l-csi2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas RZ/G2L MIPI CSI-2 receiver
> +
> +maintainers:
> + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> +
> +description:
> + The RZ/G2L CSI-2 receiver device provides MIPI CSI-2 capabilities for the
> + Renesas RZ/G2L family of devices. MIPI CSI-2 is part of the CRU block which
> + is used in conjunction with the Image Processing module, which provides the
> + video capture capabilities.
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
> + - enum:
> + - renesas,r9a07g044-csi2 # RZ/G2{L,LC}
> + - const: renesas,rzg2l-csi2
As per Rob's comment on the CRU bindings, you can remove oneOf:
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + interrupt-names:
> + items:
> + - const: csi2_link
Can this be just
interrupt-names:
const: csi2_link
?
(I've run dt_binding_check and it does not complain)
> +
> + clocks:
> + items:
> + - description: Internal clock for connecting CRU and MIPI
> + - description: CRU Main clock
> + - description: CPU Register access clock
> +
> + clock-names:
> + items:
> + - const: sysclk
> + - const: vclk
> + - const: pclk
> +
> + power-domains:
> + maxItems: 1
> +
> + resets:
> + items:
> + - description: CRU_CMN_RSTB reset terminal
> +
> + reset-names:
> + items:
> + - const: cmn-rstb
Here and above, is items: needed for a single entry ?
(again, dt_binding_check does not complain if I remove it)
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port node, single endpoint describing the CSI-2 transmitter.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> + items:
> + maximum: 4
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + Output port node, Image Processing block connected to the CSI-2 receiver.
Isn't the next processing block the CRU ? IOW, isn't this driver the
CSI-2 receiver ?
> +
> + required:
> + - port@0
> + - port@1
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - power-domains
> + - resets
> + - reset-names
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/r9a07g044-cpg.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + csi20: csi2@10830400 {
> + compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2";
> + reg = <0x10830400 0xfc00>;
> + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>,
> + <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
> + <&cpg CPG_MOD R9A07G044_CRU_PCLK>;
> + clock-names = "sysclk", "vclk", "pclk";
> + power-domains = <&cpg>;
> + resets = <&cpg R9A07G044_CRU_CMN_RSTB>;
> + reset-names = "cmn-rstb";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + csi2_in: endpoint {
> + clock-lanes = <0>;
> + data-lanes = <1 2>;
> + remote-endpoint = <&ov5645_ep>;
> + };
> + };
> +
> + port@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg = <1>;
> +
> + csi2cru: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&crucsi2>;
> + };
> + };
> + };
> + };
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [RFC PATCH v2 2/4] media: dt-bindings: media: Document RZ/G2L CRU
2022-01-21 1:05 ` [RFC PATCH v2 2/4] media: dt-bindings: media: Document RZ/G2L CRU Lad Prabhakar
2022-02-07 22:39 ` Rob Herring
@ 2022-02-15 13:06 ` Jacopo Mondi
2022-03-22 0:13 ` Lad, Prabhakar
1 sibling, 1 reply; 17+ messages in thread
From: Jacopo Mondi @ 2022-02-15 13:06 UTC (permalink / raw)
To: Lad Prabhakar
Cc: Niklas Söderlund, Philipp Zabel, Mauro Carvalho Chehab,
Rob Herring, Laurent Pinchart, Sakari Ailus, Hans Verkuil,
Geert Uytterhoeven, linux-media, linux-renesas-soc, devicetree,
linux-kernel, Prabhakar, Biju Das
Hi Prabhakar,
On Fri, Jan 21, 2022 at 01:05:41AM +0000, Lad Prabhakar wrote:
> Document the CRU block found on Renesas RZ/G2L SoC's.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v1->v2
> * Dropped CSI
> ---
> .../bindings/media/renesas,rzg2l-cru.yaml | 152 ++++++++++++++++++
> 1 file changed, 152 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> new file mode 100644
> index 000000000000..a03fc6ef0117
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> @@ -0,0 +1,152 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright (C) 2022 Renesas Electronics Corp.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas RZ/G2L Camera Data Receiving Unit (CRU)
> +
> +maintainers:
> + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> +
> +description:
> + The RZ/G2L Camera Data Receiving Unit (CRU) device provides video input
> + capabilities for the Renesas RZ/G2L family of devices.
> +
> + Depending on the instance the Image Processing input is connected to
> + external SoC pins or to a CSI-2 receiver.
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
> + - enum:
> + - renesas,r9a07g044-cru # RZ/G2{L,LC}
> + - const: renesas,rzg2l-cru
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 3
> +
> + interrupt-names:
> + items:
> + - const: image_conv
> + - const: image_conv_err
> + - const: axi_mst_err
> +
> + clocks:
> + items:
> + - description: CRU Main clock
> + - description: CPU Register access clock
> + - description: CRU image transfer clock
> +
> + clock-names:
> + items:
> + - const: vclk
> + - const: pclk
> + - const: aclk
> +
> + power-domains:
> + maxItems: 1
> +
> + resets:
> + items:
> + - description: CRU_PRESETN reset terminal
> + - description: CRU_ARESETN reset terminal
> +
> + reset-names:
> + items:
> + - const: presetn
> + - const: aresetn
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port node, single endpoint describing a parallel input source.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + hsync-active: true
> + vsync-active: true
> + bus-width: true
> + data-shift: true
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + Output port node, describing the RZ/G2L Image Processing module
> + connected the CSI-2 receiver
Isn't this the port dedicated to the CSI-2 receiver input ?
> +
> + properties:
> + endpoint@0:
> + $ref: /schemas/graph.yaml#/properties/endpoint
> + description: Endpoint connected to CSI2.
And the andpoint should describe the connection between the CRU and
the CSI-2 receiver ? (ie it should not contain CSI-2 specific
properties, as those are specified by the CSI-2 receiver device node?)
Thanks
j
> +
> + anyOf:
> + - required:
> + - endpoint@0
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - interrupt-names
> + - clocks
> + - clock-names
> + - resets
> + - reset-names
> + - power-domains
> +
> +additionalProperties: false
> +
> +examples:
> + # Device node example with CSI-2
> + - |
> + #include <dt-bindings/clock/r9a07g044-cpg.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + cru: video@10830000 {
> + compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";
> + reg = <0x10830000 0x400>;
> + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
> + clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
> + <&cpg CPG_MOD R9A07G044_CRU_PCLK>,
> + <&cpg CPG_MOD R9A07G044_CRU_ACLK>;
> + clock-names = "vclk", "pclk", "aclk";
> + power-domains = <&cpg>;
> + resets = <&cpg R9A07G044_CRU_PRESETN>,
> + <&cpg R9A07G044_CRU_ARESETN>;
> + reset-names = "presetn", "aresetn";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg = <1>;
> +
> + crucsi2: endpoint@0 {
> + reg = <0>;
> + remote-endpoint= <&csi2cru>;
> + };
> + };
> + };
> + };
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [RFC PATCH v2 3/4] media: platform: Add CRU driver for RZ/G2L SoC
2022-01-21 1:05 ` [RFC PATCH v2 3/4] media: platform: Add CRU driver for RZ/G2L SoC Lad Prabhakar
@ 2022-02-15 14:40 ` Jacopo Mondi
2022-02-15 15:45 ` Niklas Söderlund
2022-03-22 0:08 ` Lad, Prabhakar
0 siblings, 2 replies; 17+ messages in thread
From: Jacopo Mondi @ 2022-02-15 14:40 UTC (permalink / raw)
To: Lad Prabhakar
Cc: Niklas Söderlund, Philipp Zabel, Mauro Carvalho Chehab,
Rob Herring, Laurent Pinchart, Sakari Ailus, Hans Verkuil,
Geert Uytterhoeven, linux-media, linux-renesas-soc, devicetree,
linux-kernel, Prabhakar, Biju Das
Hello Prabhakar,
On Fri, Jan 21, 2022 at 01:05:42AM +0000, Lad Prabhakar wrote:
> Add v4l driver for Renesas RZ/G2L Camera data Receiving Unit.
>
> Based on a patch in the BSP by Hien Huynh
> <hien.huynh.px@renesas.com>
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v1->v2
> * Dropped group
> * Dropped CSI subdev and implemented as new driver
> * Dropped "mc_" from function names
> * Moved the driver to renesas folder
> ---
> drivers/media/platform/Kconfig | 1 +
> drivers/media/platform/Makefile | 2 +
> .../media/platform/renesas/rzg2l-cru/Kconfig | 15 +
> .../media/platform/renesas/rzg2l-cru/Makefile | 4 +
> .../platform/renesas/rzg2l-cru/rzg2l-core.c | 432 +++++++++++
> .../platform/renesas/rzg2l-cru/rzg2l-cru.h | 155 ++++
> .../platform/renesas/rzg2l-cru/rzg2l-dma.c | 722 ++++++++++++++++++
> .../platform/renesas/rzg2l-cru/rzg2l-v4l2.c | 360 +++++++++
Niklas, Laurent, this series introduces drivers/media/platform/renesas
Should the several renesas driver be moved there ?
In that case I would suggest a
drivers/media/platform/renesas/Kconfig|Makefile instead of instructing
drivers/media/Kconfig|Makefile to fish in
drivers/media/platform/renesas/rzg2l-cru/
> 8 files changed, 1691 insertions(+)
> create mode 100644 drivers/media/platform/renesas/rzg2l-cru/Kconfig
> create mode 100644 drivers/media/platform/renesas/rzg2l-cru/Makefile
> create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c
> create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h
> create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c
> create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c
>
> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> index cf4adc64c953..4251c5686c2a 100644
> --- a/drivers/media/platform/Kconfig
> +++ b/drivers/media/platform/Kconfig
> @@ -169,6 +169,7 @@ source "drivers/media/platform/exynos4-is/Kconfig"
> source "drivers/media/platform/am437x/Kconfig"
> source "drivers/media/platform/xilinx/Kconfig"
> source "drivers/media/platform/rcar-vin/Kconfig"
> +source "drivers/media/platform/renesas/rzg2l-cru/Kconfig"
> source "drivers/media/platform/atmel/Kconfig"
> source "drivers/media/platform/sunxi/Kconfig"
>
> diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
> index a148553babfc..021d30a2c66c 100644
> --- a/drivers/media/platform/Makefile
> +++ b/drivers/media/platform/Makefile
> @@ -66,6 +66,8 @@ obj-$(CONFIG_VIDEO_XILINX) += xilinx/
> obj-$(CONFIG_VIDEO_RCAR_ISP) += rcar-isp.o
> obj-$(CONFIG_VIDEO_RCAR_VIN) += rcar-vin/
>
> +obj-$(CONFIG_VIDEO_RZG2L_CRU) += renesas/rzg2l-cru/
> +
> obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel/
> obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel/
> obj-$(CONFIG_VIDEO_ATMEL_XISC) += atmel/
> diff --git a/drivers/media/platform/renesas/rzg2l-cru/Kconfig b/drivers/media/platform/renesas/rzg2l-cru/Kconfig
> new file mode 100644
> index 000000000000..310baa4d4c14
> --- /dev/null
> +++ b/drivers/media/platform/renesas/rzg2l-cru/Kconfig
> @@ -0,0 +1,15 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +config VIDEO_RZG2L_CRU
> + tristate "RZ/G2L Camera Receiving Unit (CRU) Driver"
> + depends on VIDEO_V4L2 && OF
> + depends on ARCH_RENESAS || COMPILE_TEST
> + select MEDIA_CONTROLLER
> + select VIDEO_V4L2_SUBDEV_API
> + select VIDEOBUF2_DMA_CONTIG
> + select V4L2_FWNODE
> + help
> + Support for Renesas RZ/G2L Camera Receiving Unit (CRU) driver.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called rzg2l-cru.
> diff --git a/drivers/media/platform/renesas/rzg2l-cru/Makefile b/drivers/media/platform/renesas/rzg2l-cru/Makefile
> new file mode 100644
> index 000000000000..8c307075f131
> --- /dev/null
> +++ b/drivers/media/platform/renesas/rzg2l-cru/Makefile
> @@ -0,0 +1,4 @@
> +# SPDX-License-Identifier: GPL-2.0
> +rzg2l-cru-objs = rzg2l-core.o rzg2l-dma.o rzg2l-v4l2.o
> +
> +obj-$(CONFIG_VIDEO_RZG2L_CRU) += rzg2l-cru.o
> diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c
> new file mode 100644
> index 000000000000..881bedaaff8f
> --- /dev/null
> +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c
> @@ -0,0 +1,432 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Driver for Renesas RZ/G2L CRU
> + *
> + * Copyright (C) 2022 Renesas Electronics Corp.
> + *
> + * Based on Renesas R-Car VIN
> + * Copyright (C) 2011-2013 Renesas Solutions Corp.
> + * Copyright (C) 2013 Cogent Embedded, Inc., <source@cogentembedded.com>
> + * Copyright (C) 2008 Magnus Damm
> + */
> +
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_graph.h>
<linux/mod_devicetable.h> for struct of_device_id.
Even if I assume it's included by other headers
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/slab.h>
Is slab.h needed ?
> +#include <linux/sys_soc.h>
Also sys_soc.h seems not needed
> +
> +#include <media/v4l2-async.h>
v4l2-async is included by rzg2l-cru.h
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-mc.h>
> +
> +#include "rzg2l-cru.h"
> +
> +#define v4l2_dev_to_cru(d) container_of(d, struct rzg2l_cru_dev, v4l2_dev)
> +
> +static int rzg2l_cru_csi2_link_notify(struct media_link *link, u32 flags,
> + unsigned int notification)
> +{
> + struct media_entity *entity;
> + struct rzg2l_cru_dev *cru;
> + struct video_device *vdev;
> + struct media_pad *csi_pad;
> + struct v4l2_subdev *sd;
> + int ret;
> +
> + ret = v4l2_pipeline_link_notify(link, flags, notification);
> + if (ret)
> + return ret;
> +
> + /* Only care about link enablement for CRU nodes. */
> + if (!(flags & MEDIA_LNK_FL_ENABLED) ||
> + !is_media_entity_v4l2_video_device(link->sink->entity))
Can you get a notification for an entity which is not your video
device one ?
> + return 0;
> +
> + cru = container_of(link->graph_obj.mdev, struct rzg2l_cru_dev, mdev);
> + /*
> + * Don't allow link changes if any entity in the graph is
> + * streaming, modifying the CHSEL register fields can disrupt
> + * running streams.
> + */
> + media_device_for_each_entity(entity, &cru->mdev)
> + if (entity->pads->stream_count)
> + return -EBUSY;
> +
> + mutex_lock(&cru->mdev_lock);
> + vdev = media_entity_to_video_device(link->sink->entity);
> +
> + csi_pad = media_entity_remote_pad(&cru->vdev.entity.pads[0]);
> + if (csi_pad) {
> + ret = -EMLINK;
> + goto out;
> + }
> +
> + sd = media_entity_to_v4l2_subdev(link->source->entity);
> + if (cru->csi.subdev == sd) {
> + cru->csi.channel = link->source->index - 1;
So the virtual channel selection is done based on the CSI-2 source pad
number connected to single video dev sink pad.
I then wonder what the rzg2l_csi2_get_frame_desc() is used for (since
it is not called from here afaict).
I think, since there doesn't seem to be any complex routing in the CRU
as there is in VINs, that the VC the CSI-2 rx receives as input should
be propagated to this driver by inspecting the CSI-2 frame desc ? Or
is there any routing I have missed like there is one between the R-Car
CSI-2 rx and R-Car VIN ?
In the R-Car VIN driver the links setup between
csi-2 and vin serves to set-up the pixel link and route data between
the CSI-2 and the VIN but here it seems the CRU wants the virtual
channel as received from the CSI-2 rx ?
VCSEL[1:0]
Specify a virtual channel to be processed by the image processing module.
A single channel specified by the register is selected from virtual channels 0 to 3.
As the CRU can capture one VC at the time if I got it right.
> + cru->is_csi = true;
> + } else {
> + ret = -ENODEV;
So using a parallel sensor would return -ENODEV ?
> + }
> +
> +out:
> + mutex_unlock(&cru->mdev_lock);
> +
> + return ret;
> +}
> +
> +static const struct media_device_ops rzg2l_cru_media_ops = {
> + .link_notify = rzg2l_cru_csi2_link_notify,
> +};
> +
> +static void rzg2l_cru_put(struct rzg2l_cru_dev *cru)
> +{
> + mutex_lock(&cru->mdev_lock);
> + cru->v4l2_dev.mdev = NULL;
> + mutex_unlock(&cru->mdev_lock);
> +}
Called from a single place, could be open coded and I'm not sure it
needs any locking, as the single caller is in the driver probe() call
path
> +
> +/* -----------------------------------------------------------------------------
> + * Group async notifier
> + */
> +
> +static int rzg2l_cru_group_notify_complete(struct v4l2_async_notifier *notifier)
Compared to R-Car VIN, where the CSI-2 rx instances can be routed to
several VINs, don't the CRU and CSI-2 rx for the RZ/GL always go
together. IOW will there be multiple CSI-2 rx instances connected to a
single CRU ? If not, this can be simplified and the whole concept of
'group' can be removed ?
> +{
> + struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev);
> + unsigned int i;
> + int ret;
> +
> + ret = media_device_register(&cru->mdev);
> + if (ret)
> + return ret;
> +
> + ret = v4l2_device_register_subdev_nodes(&cru->v4l2_dev);
> + if (ret) {
> + dev_err(cru->dev, "Failed to register subdev nodes\n");
> + return ret;
> + }
> +
> + if (!video_is_registered(&cru->vdev)) {
> + ret = rzg2l_cru_v4l2_register(cru);
> + if (ret)
> + return ret;
> + }
> +
> + /* Create all media device links between CRU and CSI-2's. */
> + for (i = 1; i <= CSI2_VCHANNEL; i++) {
> + struct media_entity *source, *sink;
> +
> + source = &cru->csi.subdev->entity;
> + sink = &cru->vdev.entity;
> +
> + ret = media_create_pad_link(source, i, sink, 0, 0);
> + if (ret) {
> + dev_err(cru->dev, "Error adding link from %s to %s\n",
> + source->name, sink->name);
> + break;
> + }
> + }
> +
> + return ret;
> +}
> +
> +static void rzg2l_cru_group_notify_unbind(struct v4l2_async_notifier *notifier,
> + struct v4l2_subdev *subdev,
> + struct v4l2_async_subdev *asd)
> +{
> + struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev);
> +
> + rzg2l_cru_v4l2_unregister(cru);
> +
> + mutex_lock(&cru->mdev_lock);
Is locking needed ?
> +
> + if (cru->csi.asd == asd) {
> + cru->csi.subdev = NULL;
> + dev_dbg(cru->dev, "Unbind CSI-2 %s\n", subdev->name);
> + }
> +
> + mutex_unlock(&cru->mdev_lock);
> +
> + media_device_unregister(&cru->mdev);
> +}
> +
> +static int rzg2l_cru_group_notify_bound(struct v4l2_async_notifier *notifier,
> + struct v4l2_subdev *subdev,
> + struct v4l2_async_subdev *asd)
> +{
> + struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev);
> + unsigned int i;
> +
> + mutex_lock(&cru->mdev_lock);
Is locking needed ?
> +
> + if (cru->csi.asd == asd) {
> + cru->csi.subdev = subdev;
> + dev_dbg(cru->dev, "Bound CSI-2 %s to slot %u\n", subdev->name, i);
> + }
> +
> + mutex_unlock(&cru->mdev_lock);
> +
> + return 0;
> +}
> +
> +static const struct v4l2_async_notifier_operations rzg2l_cru_async_ops = {
> + .bound = rzg2l_cru_group_notify_bound,
> + .unbind = rzg2l_cru_group_notify_unbind,
> + .complete = rzg2l_cru_group_notify_complete,
> +};
> +
> +static int rvin_mc_parse_of(struct rzg2l_cru_dev *cru, unsigned int id)
> +{
> + struct v4l2_fwnode_endpoint vep = {
> + .bus_type = V4L2_MBUS_CSI2_DPHY,
> + };
> + struct fwnode_handle *ep, *fwnode;
> + struct v4l2_async_subdev *asd;
> + int ret;
> +
> + ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(cru->dev), 1, id, 0);
> + if (!ep)
> + return 0;
> +
> + fwnode = fwnode_graph_get_remote_endpoint(ep);
> + ret = v4l2_fwnode_endpoint_parse(ep, &vep);
> + fwnode_handle_put(ep);
> + if (ret) {
> + dev_err(cru->dev, "Failed to parse %pOF\n", to_of_node(fwnode));
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + if (!of_device_is_available(to_of_node(fwnode))) {
> + dev_dbg(cru->dev, "OF device %pOF disabled, ignoring\n",
> + to_of_node(fwnode));
> + ret = -ENOTCONN;
> + goto out;
> + }
> +
> + asd = v4l2_async_nf_add_fwnode(&cru->notifier, fwnode,
> + struct v4l2_async_subdev);
> + if (IS_ERR(asd)) {
> + ret = PTR_ERR(asd);
> + goto out;
> + }
> +
> + cru->csi.asd = asd;
> +
> + dev_dbg(cru->dev, "Added OF device %pOF to slot %u\n",
> + to_of_node(fwnode), vep.base.id);
> +out:
> + fwnode_handle_put(fwnode);
> +
> + return ret;
> +}
> +
> +static int rzg2l_cru_mc_parse_of_graph(struct rzg2l_cru_dev *cru)
> +{
> + int ret;
> +
> + v4l2_async_nf_init(&cru->notifier);
> +
> + ret = rvin_mc_parse_of(cru, 0);
> + if (ret)
> + return ret;
> +
> + cru->notifier.ops = &rzg2l_cru_async_ops;
> +
> + if (list_empty(&cru->notifier.asd_list))
> + return 0;
> +
> + ret = v4l2_async_nf_register(&cru->v4l2_dev, &cru->notifier);
> + if (ret < 0) {
> + dev_err(cru->dev, "Notifier registration failed\n");
> + v4l2_async_nf_cleanup(&cru->notifier);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int rzg2l_cru_csi2_init(struct rzg2l_cru_dev *cru)
> +{
> + struct media_device *mdev = NULL;
> + const struct of_device_id *match;
> + int ret;
> +
> + cru->pad.flags = MEDIA_PAD_FL_SINK;
> + ret = media_entity_pads_init(&cru->vdev.entity, 1, &cru->pad);
> + if (ret)
> + return ret;
> +
> + mutex_init(&cru->mdev_lock);
> + mdev = &cru->mdev;
> + mdev->dev = cru->dev;
> + mdev->ops = &rzg2l_cru_media_ops;
> +
> + match = of_match_node(cru->dev->driver->of_match_table,
> + cru->dev->of_node);
> +
> + strscpy(mdev->driver_name, KBUILD_MODNAME, sizeof(mdev->driver_name));
> + strscpy(mdev->model, match->compatible, sizeof(mdev->model));
> + snprintf(mdev->bus_info, sizeof(mdev->bus_info), "platform:%s",
> + dev_name(mdev->dev));
> +
> + cru->v4l2_dev.mdev = &cru->mdev;
> +
> + media_device_init(mdev);
> +
> + ret = rzg2l_cru_mc_parse_of_graph(cru);
> + if (ret)
> + rzg2l_cru_put(cru);
> +
> + return 0;
> +}
> +
> +static int rzg2l_cru_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct rzg2l_cru_dev *cru = container_of(ctrl->handler,
> + struct rzg2l_cru_dev,
> + ctrl_handler);
> + int ret = 0;
> +
> + switch (ctrl->id) {
> + case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE:
What is the purpose of having this controllable with a ctrl ?
> + if (cru->state == RZG2L_CRU_DMA_STOPPED ||
> + cru->state == RZG2L_CRU_DMA_STOPPING)
> + cru->num_buf = ctrl->val;
> + else
> + ret = -EBUSY;
> +
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static const struct v4l2_ctrl_ops rzg2l_cru_ctrl_ops = {
> + .s_ctrl = rzg2l_cru_s_ctrl,
> +};
> +
> +static int rzg2l_cru_probe(struct platform_device *pdev)
> +{
> + struct rzg2l_cru_dev *cru;
> + struct v4l2_ctrl *ctrl;
> + int irq, ret;
> +
> + cru = devm_kzalloc(&pdev->dev, sizeof(*cru), GFP_KERNEL);
> + if (!cru)
> + return -ENOMEM;
> +
> + cru->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(cru->base))
> + return PTR_ERR(cru->base);
> +
> + cru->presetn = devm_reset_control_get(&pdev->dev, "presetn");
> + if (IS_ERR(cru->presetn))
> + return dev_err_probe(&pdev->dev, PTR_ERR(cru->presetn),
> + "failed to get cpg presetn\n");
> +
> + cru->aresetn = devm_reset_control_get(&pdev->dev, "aresetn");
> + if (IS_ERR(cru->aresetn))
> + return dev_err_probe(&pdev->dev, PTR_ERR(cru->aresetn),
> + "failed to get cpg aresetn\n");
> +
> + cru->dev = &pdev->dev;
> + cru->info = of_device_get_match_data(&pdev->dev);
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0)
> + return irq;
> +
> + ret = rzg2l_cru_dma_register(cru, irq);
> + if (ret)
> + return ret;
> +
> + platform_set_drvdata(pdev, cru);
> +
> + ret = rzg2l_cru_csi2_init(cru);
> + if (ret)
> + goto error_dma_unregister;
> +
> + v4l2_ctrl_handler_init(&cru->ctrl_handler, 1);
> + ctrl = v4l2_ctrl_new_std(&cru->ctrl_handler, &rzg2l_cru_ctrl_ops,
> + V4L2_CID_MIN_BUFFERS_FOR_CAPTURE,
> + 1, HW_BUFFER_MAX, 1, HW_BUFFER_DEFAULT);
> + if (cru->ctrl_handler.error) {
> + dev_err(&pdev->dev, "%s: control initialization error %d\n",
> + __func__, cru->ctrl_handler.error);
> + ret = cru->ctrl_handler.error;
> + goto free_ctrl;
> + }
> +
> + ctrl->flags &= ~V4L2_CTRL_FLAG_READ_ONLY;
Is this necessary ?
> + cru->v4l2_dev.ctrl_handler = &cru->ctrl_handler;
> +
> + cru->num_buf = HW_BUFFER_DEFAULT;
> +
> + pm_suspend_ignore_children(&pdev->dev, true);
> + pm_runtime_enable(&pdev->dev);
Are there pm_runtime operations associated with this driver ?
> +
> + return 0;
> +
> +free_ctrl:
> + v4l2_ctrl_handler_free(&cru->ctrl_handler);
> +error_dma_unregister:
> + rzg2l_cru_dma_unregister(cru);
> +
> + return ret;
> +}
> +
> +static const struct rzg2l_cru_info rzg2l_cru_info_generic = {
> + .max_width = 2800,
> + .max_height = 4096,
> +};
This implies you expect different revisions to have differe input size
limitations, right ?
> +
> +static const struct of_device_id rzg2l_cru_of_id_table[] = {
> + {
> + .compatible = "renesas,rzg2l-cru",
> + .data = &rzg2l_cru_info_generic,
> + },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, rzg2l_cru_of_id_table);
> +
> +static int rzg2l_cru_remove(struct platform_device *pdev)
> +{
> + struct rzg2l_cru_dev *cru = platform_get_drvdata(pdev);
> +
> + pm_runtime_disable(&pdev->dev);
> +
> + rzg2l_cru_v4l2_unregister(cru);
> +
> + v4l2_async_nf_unregister(&cru->notifier);
> + v4l2_async_nf_cleanup(&cru->notifier);
> +
> + media_device_cleanup(&cru->mdev);
> + mutex_destroy(&cru->mdev_lock);
> + cru->v4l2_dev.mdev = NULL;
> +
> + v4l2_ctrl_handler_free(&cru->ctrl_handler);
> + cru->vdev.ctrl_handler = NULL;
> +
> + rzg2l_cru_dma_unregister(cru);
> +
> + return 0;
> +}
> +
> +static struct platform_driver rzg2l_cru_driver = {
> + .driver = {
> + .name = "rzg2l-cru",
> + .of_match_table = rzg2l_cru_of_id_table,
> + },
> + .probe = rzg2l_cru_probe,
> + .remove = rzg2l_cru_remove,
> +};
> +
> +module_platform_driver(rzg2l_cru_driver);
> +
> +MODULE_DESCRIPTION("Renesas RZ/G2L CRU driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h
> new file mode 100644
> index 000000000000..91a28279846e
> --- /dev/null
> +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h
> @@ -0,0 +1,155 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Driver for Renesas RZ/G2L CRU
> + *
> + * Copyright (C) 2022 Renesas Electronics Corp.
> + *
> + */
> +
> +#ifndef __RZG2L_CRU__
> +#define __RZG2L_CRU__
> +
> +#include <linux/clk.h>
> +#include <linux/reset.h>
> +
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-dev.h>
> +#include <media/v4l2-device.h>
> +#include <media/videobuf2-v4l2.h>
> +
> +/* Number of HW buffers */
> +#define HW_BUFFER_MAX 8
> +#define HW_BUFFER_DEFAULT 3
> +
> +/* Address alignment mask for HW buffers */
> +#define HW_BUFFER_MASK 0x1ff
> +
> +/* Maximum number of CSI2 virtual channels */
> +#define CSI2_VCHANNEL 4
> +
> +/**
> + * enum rzg2l_cru_dma_state - DMA states
> + * @RZG2L_CRU_DMA_STOPPED: No operation in progress
> + * @RZG2L_CRU_DMA_STARTING: Capture starting up
> + * @RZG2L_CRU_DMA_RUNNING: Operation in progress have buffers
> + * @RZG2L_CRU_DMA_STOPPING: Stopping operation
> + */
> +enum rzg2l_cru_dma_state {
> + RZG2L_CRU_DMA_STOPPED = 0,
> + RZG2L_CRU_DMA_STARTING,
> + RZG2L_CRU_DMA_RUNNING,
> + RZG2L_CRU_DMA_STOPPING,
> +};
> +
> +/**
> + * struct rzg2l_cru_info - Information about the particular CRU implementation
> + * @max_width: max input width the CRU supports
> + * @max_height: max input height the CRU supports
> + */
> +struct rzg2l_cru_info {
> + unsigned int max_width;
> + unsigned int max_height;
> +};
> +
> +struct rzg2l_cru_csi {
> + struct v4l2_async_subdev *asd;
> + struct v4l2_subdev *subdev;
> + u32 channel;
> +};
> +
> +/**
> + * struct rzg2l_cru_dev - Renesas CRU device structure
> + * @dev: (OF) device
> + * @base: device I/O register space remapped to virtual memory
> + * @info: info about CRU instance
> + *
> + * @presetn: CRU_PRESETN reset line
> + * @aresetn: CRU_ARESETN reset line
> + *
> + * @vdev: V4L2 video device associated with CRU
> + * @v4l2_dev: V4L2 device
> + * @ctrl_handler: V4L2 control handler
> + * @num_buf: Holds the current number of buffers enabled
> + * @notifier: V4L2 asynchronous subdevs notifier
> + *
> + * @csi: CSI info
> + * @mdev: media device
> + * @mdev_lock: protects the count, notifier and csi members
> + * @pad: media pad for the video device entity
> + *
> + * @lock: protects @queue
> + * @queue: vb2 buffers queue
> + * @scratch: cpu address for scratch buffer
> + * @scratch_phys: physical address of the scratch buffer
> + *
> + * @qlock: protects @queue_buf, @buf_list, @sequence
> + * @state
> + * @queue_buf: Keeps track of buffers given to HW slot
> + * @buf_list: list of queued buffers
> + * @sequence: V4L2 buffers sequence number
> + * @state: keeps track of operation state
> + *
> + * @is_csi: flag to mark the CRU as using a CSI-2 subdevice
> + *
> + * @input_is_yuv: flag to mark the input format of CRU
> + * @output_is_yuv: flag to mark the output format of CRU
> + *
> + * @mbus_code: media bus format code
> + * @format: active V4L2 pixel format
> + *
> + * @compose: active composing
> + * @source: active size of the video source
> + * @std: active video standard of the video source
These last fields seems not to be present in the structure
> + */
> +struct rzg2l_cru_dev {
> + struct device *dev;
> + void __iomem *base;
> + const struct rzg2l_cru_info *info;
> +
> + struct reset_control *presetn;
> + struct reset_control *aresetn;
> +
> + struct video_device vdev;
> + struct v4l2_device v4l2_dev;
> + struct v4l2_ctrl_handler ctrl_handler;
> + u8 num_buf;
> +
> + struct v4l2_async_notifier notifier;
> +
> + struct rzg2l_cru_csi csi;
> + struct media_device mdev;
> + struct mutex mdev_lock;
> + struct media_pad pad;
> +
> + struct mutex lock;
> + struct vb2_queue queue;
> + void *scratch;
> + dma_addr_t scratch_phys;
> +
> + spinlock_t qlock;
> + struct vb2_v4l2_buffer *queue_buf[HW_BUFFER_MAX];
> + struct list_head buf_list;
> + unsigned int sequence;
> + enum rzg2l_cru_dma_state state;
> +
> + bool is_csi;
> +
> + bool input_is_yuv;
> + bool output_is_yuv;
> +
> + u32 mbus_code;
> + struct v4l2_pix_format format;
> +
> + struct v4l2_rect compose;
> +};
> +
> +int rzg2l_cru_dma_register(struct rzg2l_cru_dev *cru, int irq);
> +void rzg2l_cru_dma_unregister(struct rzg2l_cru_dev *cru);
> +
> +int rzg2l_cru_v4l2_register(struct rzg2l_cru_dev *cru);
> +void rzg2l_cru_v4l2_unregister(struct rzg2l_cru_dev *cru);
> +
> +const struct v4l2_format_info *rzg2l_cru_format_from_pixel(u32 format);
> +
> +#endif
> diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c
> new file mode 100644
> index 000000000000..0fcf4baccca9
> --- /dev/null
> +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c
> @@ -0,0 +1,722 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Driver for Renesas RZ/G2L CRU
> + *
> + * Copyright (C) 2022 Renesas Electronics Corp.
> + *
> + * Based on Renesas R-Car VIN
> + * Copyright (C) 2011-2013 Renesas Solutions Corp.
> + * Copyright (C) 2013 Cogent Embedded, Inc., <source@cogentembedded.com>
> + * Copyright (C) 2008 Magnus Damm
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/pm_runtime.h>
> +
> +#include <media/videobuf2-dma-contig.h>
> +
> +#include "rzg2l-cru.h"
> +
> +/* HW CRU Registers Definition */
> +/* CRU Control Register */
> +#define CRUnCTRL 0x0
> +#define CRUnCTRL_VINSEL(x) ((x) << 0)
> +
> +/* CRU Interrupt Enable Register */
> +#define CRUnIE 0x4
> +#define CRUnIE_SFE BIT(16)
> +#define CRUnIE_EFE BIT(17)
> +
> +/* CRU Interrupt Status Register */
> +#define CRUnINTS 0x8
> +#define CRUnINTS_SFS BIT(16)
> +
> +/* CRU Reset Register */
> +#define CRUnRST 0xc
> +#define CRUnRST_VRESETN BIT(0)
> +
> +/* Memory Bank Base Address (Lower) Register for CRU Image Data */
> +#define AMnMBxADDRL(x) (0x100 + ((x) * 8))
> +
> +/* Memory Bank Base Address (Higher) Register for CRU Image Data */
> +#define AMnMBxADDRH(x) (0x104 + ((x) * 8))
> +
> +/* Memory Bank Enable Register for CRU Image Data */
> +#define AMnMBVALID 0x148
> +#define AMnMBVALID_MBVALID(x) GENMASK(x, 0)
> +
> +/* Memory Bank Status Register for CRU Image Data */
> +#define AMnMBS 0x14c
> +#define AMnMBS_MBSTS 0x7
> +
> +/* AXI Master FIFO Pointer Register for CRU Image Data */
> +#define AMnFIFOPNTR 0x168
> +#define AMnFIFOPNTR_FIFOWPNTR GENMASK(7, 0)
> +#define AMnFIFOPNTR_FIFORPNTR_Y GENMASK(23, 16)
> +
> +/* AXI Master Transfer Stop Register for CRU Image Data */
> +#define AMnAXISTP 0x174
> +#define AMnAXISTP_AXI_STOP BIT(0)
> +
> +/* AXI Master Transfer Stop Status Register for CRU Image Data */
> +#define AMnAXISTPACK 0x178
> +#define AMnAXISTPACK_AXI_STOP_ACK BIT(0)
> +
> +/* CRU Image Processing Enable Register */
> +#define ICnEN 0x200
> +#define ICnEN_ICEN BIT(0)
> +
> +/* CRU Image Processing Main Control Register */
> +#define ICnMC 0x208
> +#define ICnMC_CSCTHR BIT(5)
> +#define ICnMC_INF_YUV8_422 (0x1e << 16)
> +#define ICnMC_INF_USER (0x30 << 16)
> +#define ICnMC_VCSEL(x) ((x) << 22)
> +#define ICnMC_INF_MASK GENMASK(21, 16)
> +
> +/* CRU Module Status Register */
> +#define ICnMS 0x254
> +#define ICnMS_IA BIT(2)
> +
> +/* CRU Data Output Mode Register */
> +#define ICnDMR 0x26c
> +#define ICnDMR_YCMODE_UYVY (1 << 4)
> +
> +#define RZG2L_TIMEOUT_MS 100
> +#define RZG2L_RETRIES 10
> +
> +struct rzg2l_cru_buffer {
> + struct vb2_v4l2_buffer vb;
> + struct list_head list;
> +};
> +
> +#define to_buf_list(vb2_buffer) (&container_of(vb2_buffer, \
> + struct rzg2l_cru_buffer, \
> + vb)->list)
> +
> +static void rzg2l_cru_write(struct rzg2l_cru_dev *cru, u32 offset, u32 value)
> +{
> + iowrite32(value, cru->base + offset);
> +}
> +
> +static u32 rzg2l_cru_read(struct rzg2l_cru_dev *cru, u32 offset)
> +{
> + return ioread32(cru->base + offset);
> +}
> +
> +/* Need to hold qlock before calling */
> +static void return_unused_buffers(struct rzg2l_cru_dev *cru,
> + enum vb2_buffer_state state)
> +{
> + struct rzg2l_cru_buffer *buf, *node;
> + unsigned long flags;
> + unsigned int i;
> +
> + spin_lock_irqsave(&cru->qlock, flags);
> + for (i = 0; i < cru->num_buf; i++) {
> + if (cru->queue_buf[i]) {
> + vb2_buffer_done(&cru->queue_buf[i]->vb2_buf,
> + state);
> + cru->queue_buf[i] = NULL;
> + }
> + }
> +
> + list_for_each_entry_safe(buf, node, &cru->buf_list, list) {
> + vb2_buffer_done(&buf->vb.vb2_buf, state);
> + list_del(&buf->list);
> + }
> + spin_unlock_irqrestore(&cru->qlock, flags);
> +}
> +
> +static int rzg2l_cru_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
> + unsigned int *nplanes, unsigned int sizes[],
> + struct device *alloc_devs[])
> +{
> + struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vq);
> +
> + /* Make sure the image size is large enough. */
> + if (*nplanes)
> + return sizes[0] < cru->format.sizeimage ? -EINVAL : 0;
> +
> + *nplanes = 1;
> + sizes[0] = cru->format.sizeimage;
> +
> + return 0;
> +};
> +
> +static int rzg2l_cru_buffer_prepare(struct vb2_buffer *vb)
> +{
> + struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vb->vb2_queue);
> + unsigned long size = cru->format.sizeimage;
> +
> + if (vb2_plane_size(vb, 0) < size) {
> + dev_err(cru->dev, "buffer too small (%lu < %lu)\n",
> + vb2_plane_size(vb, 0), size);
> + return -EINVAL;
> + }
> +
> + vb2_set_plane_payload(vb, 0, size);
> +
> + return 0;
> +}
> +
> +static void rzg2l_cru_buffer_queue(struct vb2_buffer *vb)
> +{
> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> + struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vb->vb2_queue);
> + unsigned long flags;
> +
> + spin_lock_irqsave(&cru->qlock, flags);
> +
> + list_add_tail(to_buf_list(vbuf), &cru->buf_list);
> +
> + spin_unlock_irqrestore(&cru->qlock, flags);
> +}
> +
> +static int rzg2l_cru_mc_validate_format(struct rzg2l_cru_dev *cru,
> + struct v4l2_subdev *sd,
> + struct media_pad *pad)
Isn't this better realized by installing a custom
media_entity_operations.link_validate() operation in the vdev.entity ?
There you can call v4l2_subdev_link_validate_default() to make sure
the sizes and format on pads on each side of the link match and then
perform additiona validations like the one you have here below ?
The core will call it for you at media_pipeline_start() time.
I think it should work for vdev.entities as well as for subdev
entities ?
I'll review the rest after I understood the CSI-2 part better.
Thanks
j
> +{
> + struct v4l2_subdev_format fmt = {
> + .which = V4L2_SUBDEV_FORMAT_ACTIVE,
> + };
> +
> + fmt.pad = pad->index;
> + fmt.stream = 0;
> + if (v4l2_subdev_call(sd, pad, get_fmt, v4l2_subdev_get_active_state(sd), &fmt))
> + return -EPIPE;
> +
> + if (cru->is_csi) {
> + switch (fmt.format.code) {
> + case MEDIA_BUS_FMT_UYVY8_2X8:
> + break;
> + default:
> + return -EPIPE;
> + }
> + }
> + cru->mbus_code = fmt.format.code;
> +
> + switch (fmt.format.field) {
> + case V4L2_FIELD_TOP:
> + case V4L2_FIELD_BOTTOM:
> + case V4L2_FIELD_NONE:
> + case V4L2_FIELD_INTERLACED_TB:
> + case V4L2_FIELD_INTERLACED_BT:
> + case V4L2_FIELD_INTERLACED:
> + case V4L2_FIELD_SEQ_TB:
> + case V4L2_FIELD_SEQ_BT:
> + break;
> + default:
> + return -EPIPE;
> + }
> +
> + if (fmt.format.width != cru->format.width ||
> + fmt.format.height != cru->format.height ||
> + fmt.format.code != cru->mbus_code)
> + return -EPIPE;
> +
> + return 0;
> +}
> +
> +static void rzg2l_cru_set_slot_addr(struct rzg2l_cru_dev *cru,
> + int slot, dma_addr_t addr)
> +{
> + const struct v4l2_format_info *fmt;
> + int offsetx, offsety;
> + dma_addr_t offset;
> +
> + fmt = rzg2l_cru_format_from_pixel(cru->format.pixelformat);
> +
> + /*
> + * There is no HW support for composition do the best we can
> + * by modifying the buffer offset
> + */
> + offsetx = cru->compose.left * fmt->bpp[0];
> + offsety = cru->compose.top * cru->format.bytesperline;
> + offset = addr + offsetx + offsety;
> +
> + /*
> + * The address needs to be 512 bytes aligned. Driver should never accept
> + * settings that do not satisfy this in the first place...
> + */
> + if (WARN_ON((offsetx | offsety | offset) & HW_BUFFER_MASK))
> + return;
> +
> + /* Currently, we just use the buffer in 32 bits address */
> + rzg2l_cru_write(cru, AMnMBxADDRL(slot), offset);
> + rzg2l_cru_write(cru, AMnMBxADDRH(slot), 0);
> +}
> +
> +/*
> + * Moves a buffer from the queue to the HW slot. If no buffer is
> + * available use the scratch buffer. The scratch buffer is never
> + * returned to userspace, its only function is to enable the capture
> + * loop to keep running.
> + */
> +static void rzg2l_cru_fill_hw_slot(struct rzg2l_cru_dev *cru, int slot)
> +{
> + struct vb2_v4l2_buffer *vbuf;
> + struct rzg2l_cru_buffer *buf;
> + dma_addr_t phys_addr;
> +
> + /* A already populated slot shall never be overwritten. */
> + if (WARN_ON(cru->queue_buf[slot]))
> + return;
> +
> + dev_dbg(cru->dev, "Filling HW slot: %d\n", slot);
> +
> + if (list_empty(&cru->buf_list)) {
> + cru->queue_buf[slot] = NULL;
> + phys_addr = cru->scratch_phys;
> + } else {
> + /* Keep track of buffer we give to HW */
> + buf = list_entry(cru->buf_list.next,
> + struct rzg2l_cru_buffer, list);
> + vbuf = &buf->vb;
> + list_del_init(to_buf_list(vbuf));
> + cru->queue_buf[slot] = vbuf;
> +
> + /* Setup DMA */
> + phys_addr = vb2_dma_contig_plane_dma_addr(&vbuf->vb2_buf, 0);
> + }
> +
> + rzg2l_cru_set_slot_addr(cru, slot, phys_addr);
> +}
> +
> +static void rzg2l_cru_initialize_axi(struct rzg2l_cru_dev *cru)
> +{
> + unsigned int slot;
> +
> + /*
> + * Set image data memory banks.
> + * Currently, we will use maximum address.
> + */
> + rzg2l_cru_write(cru, AMnMBVALID, AMnMBVALID_MBVALID(cru->num_buf - 1));
> +
> + for (slot = 0; slot < cru->num_buf; slot++)
> + rzg2l_cru_fill_hw_slot(cru, slot);
> +}
> +
> +static void rzg2l_cru_csi2_setup(struct rzg2l_cru_dev *cru)
> +{
> + u32 icnmc;
> +
> + switch (cru->mbus_code) {
> + case MEDIA_BUS_FMT_UYVY8_2X8:
> + icnmc = ICnMC_INF_YUV8_422;
> + cru->input_is_yuv = true;
> + break;
> + default:
> + cru->input_is_yuv = false;
> + icnmc = ICnMC_INF_USER;
> + break;
> + }
> +
> + icnmc |= (rzg2l_cru_read(cru, ICnMC) & ~ICnMC_INF_MASK);
> +
> + /* Set virtual channel CSI2 */
> + icnmc |= ICnMC_VCSEL(cru->csi.channel);
> +
> + rzg2l_cru_write(cru, ICnMC, icnmc);
> +}
> +
> +static int rzg2l_cru_initialize_image_conv(struct rzg2l_cru_dev *cru)
> +{
> + u32 icndmr;
> +
> + if (cru->is_csi)
> + rzg2l_cru_csi2_setup(cru);
> +
> + /* Output format */
> + switch (cru->format.pixelformat) {
> + case V4L2_PIX_FMT_UYVY:
> + icndmr = ICnDMR_YCMODE_UYVY;
> + cru->output_is_yuv = true;
> + break;
> + default:
> + dev_err(cru->dev, "Invalid pixelformat (0x%x)\n",
> + cru->format.pixelformat);
> + return -EINVAL;
> + }
> +
> + /* If input and output use same colorspace, do bypass mode */
> + if (cru->output_is_yuv == cru->input_is_yuv)
> + rzg2l_cru_write(cru, ICnMC,
> + rzg2l_cru_read(cru, ICnMC) | ICnMC_CSCTHR);
> + else
> + rzg2l_cru_write(cru, ICnMC,
> + rzg2l_cru_read(cru, ICnMC) & (~ICnMC_CSCTHR));
> +
> + /* Set output data format */
> + rzg2l_cru_write(cru, ICnDMR, icndmr);
> +
> + return 0;
> +}
> +
> +static int rzg2l_cru_set_stream(struct rzg2l_cru_dev *cru, int on)
> +{
> + struct media_pipeline *pipe;
> + struct v4l2_subdev *sd;
> + struct media_pad *pad;
> + unsigned long flags;
> + int ret;
> +
> + pad = media_entity_remote_pad(&cru->pad);
> + if (!pad)
> + return -EPIPE;
> +
> + sd = media_entity_to_v4l2_subdev(pad->entity);
> +
> + if (!on) {
> + media_pipeline_stop(cru->vdev.entity.pads);
> + return v4l2_subdev_call(sd, video, s_stream, 0);
> + }
> +
> + ret = rzg2l_cru_mc_validate_format(cru, sd, pad);
> + if (ret)
> + return ret;
> +
> + spin_lock_irqsave(&cru->qlock, flags);
> +
> + /* Select a video input */
> + if (cru->is_csi)
> + rzg2l_cru_write(cru, CRUnCTRL, CRUnCTRL_VINSEL(0));
> +
> + /* Cancel the software reset for image processing block */
> + rzg2l_cru_write(cru, CRUnRST, CRUnRST_VRESETN);
> +
> + /* Disable and clear the interrupt before using */
> + rzg2l_cru_write(cru, CRUnIE, 0);
> + rzg2l_cru_write(cru, CRUnINTS, 0x001f000f);
> +
> + /* Initialize the AXI master */
> + rzg2l_cru_initialize_axi(cru);
> +
> + /* Initialize image convert */
> + ret = rzg2l_cru_initialize_image_conv(cru);
> + if (ret) {
> + spin_unlock_irqrestore(&cru->qlock, flags);
> + return ret;
> + }
> +
> + /* Enable interrupt */
> + rzg2l_cru_write(cru, CRUnIE, CRUnIE_EFE);
> +
> + /* Enable image processing reception */
> + rzg2l_cru_write(cru, ICnEN, ICnEN_ICEN);
> +
> + spin_unlock_irqrestore(&cru->qlock, flags);
> +
> + pipe = sd->entity.pads->pipe ? sd->entity.pads->pipe : &cru->vdev.pipe;
> + ret = media_pipeline_start(cru->vdev.entity.pads, pipe);
> + if (ret)
> + return ret;
> +
> + ret = v4l2_subdev_call(sd, video, s_stream, 1);
> + if (ret == -ENOIOCTLCMD)
> + ret = 0;
> + if (ret)
> + media_pipeline_stop(cru->vdev.entity.pads);
> +
> + return ret;
> +}
> +
> +static void rzg2l_cru_stop_streaming(struct rzg2l_cru_dev *cru)
> +{
> + u32 amnfifopntr, amnfifopntr_w, amnfifopntr_r_y;
> + unsigned int retries = 0;
> + unsigned long flags;
> + u32 icnms;
> +
> + cru->state = RZG2L_CRU_DMA_STOPPING;
> +
> + rzg2l_cru_set_stream(cru, 0);
> +
> + spin_lock_irqsave(&cru->qlock, flags);
> +
> + /* Enable IRQ to detect frame start reception */
> + rzg2l_cru_write(cru, CRUnINTS,
> + (~rzg2l_cru_read(cru, CRUnINTS)) | CRUnINTS_SFS);
> + rzg2l_cru_write(cru, CRUnIE, CRUnIE_SFE);
> +
> + /* Wait for streaming to stop */
> + while (retries++ < RZG2L_RETRIES) {
> + spin_unlock_irqrestore(&cru->qlock, flags);
> + msleep(RZG2L_TIMEOUT_MS);
> + spin_lock_irqsave(&cru->qlock, flags);
> + }
> +
> + icnms = rzg2l_cru_read(cru, ICnMS) & ICnMS_IA;
> + if (icnms)
> + dev_err(cru->dev, "Failed stop HW, something is seriously broken\n");
> +
> + cru->state = RZG2L_CRU_DMA_STOPPED;
> +
> + /* Stop the operation of image conversion */
> + rzg2l_cru_write(cru, ICnEN, 0);
> +
> + /* Disable and clear the interrupt */
> + rzg2l_cru_write(cru, CRUnIE, 0);
> + rzg2l_cru_write(cru, CRUnINTS, 0x001F0F0F);
> +
> + /* Wait until the FIFO becomes empty */
> + for (retries = 5; retries > 0; retries--) {
> + amnfifopntr = rzg2l_cru_read(cru, AMnFIFOPNTR);
> +
> + amnfifopntr_w = amnfifopntr & AMnFIFOPNTR_FIFOWPNTR;
> + amnfifopntr_r_y =
> + (amnfifopntr & AMnFIFOPNTR_FIFORPNTR_Y) >> 16;
> + if (amnfifopntr_w == amnfifopntr_r_y)
> + break;
> +
> + usleep_range(10, 20);
> + }
> +
> + /* Notify that FIFO is not empty here */
> + if (!retries)
> + dev_err(cru->dev, "Failed to empty FIFO\n");
> +
> + /* Stop AXI bus */
> + rzg2l_cru_write(cru, AMnAXISTP, AMnAXISTP_AXI_STOP);
> +
> + /* Wait until the AXI bus stop */
> + for (retries = 5; retries > 0; retries--) {
> + if (rzg2l_cru_read(cru, AMnAXISTPACK) &
> + AMnAXISTPACK_AXI_STOP_ACK)
> + break;
> +
> + usleep_range(10, 20);
> + };
> +
> + /* Notify that AXI bus can not stop here */
> + if (!retries)
> + dev_err(cru->dev, "Failed to stop AXI bus\n");
> +
> + /* Cancel the AXI bus stop request */
> + rzg2l_cru_write(cru, AMnAXISTP, 0);
> +
> + /* Resets the image processing module */
> + rzg2l_cru_write(cru, CRUnRST, 0);
> +
> + spin_unlock_irqrestore(&cru->qlock, flags);
> +
> + /* Set reset state */
> + reset_control_assert(cru->aresetn);
> +}
> +
> +static int rzg2l_cru_start_streaming_vq(struct vb2_queue *vq, unsigned int count)
> +{
> + struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vq);
> + int ret;
> +
> + /* Release reset state */
> + ret = reset_control_deassert(cru->aresetn);
> + if (ret) {
> + dev_err(cru->dev, "failed to deassert aresetn\n");
> + return ret;
> + }
> +
> + /* Allocate scratch buffer. */
> + cru->scratch = dma_alloc_coherent(cru->dev, cru->format.sizeimage,
> + &cru->scratch_phys, GFP_KERNEL);
> + if (!cru->scratch) {
> + return_unused_buffers(cru, VB2_BUF_STATE_QUEUED);
> + dev_err(cru->dev, "Failed to allocate scratch buffer\n");
> + return -ENOMEM;
> + }
> +
> + cru->sequence = 0;
> +
> + ret = rzg2l_cru_set_stream(cru, 1);
> + if (ret) {
> + return_unused_buffers(cru, VB2_BUF_STATE_QUEUED);
> + goto out;
> + }
> +
> + cru->state = RZG2L_CRU_DMA_STARTING;
> +
> + dev_dbg(cru->dev, "Starting to capture\n");
> +
> +out:
> + if (ret)
> + dma_free_coherent(cru->dev, cru->format.sizeimage, cru->scratch,
> + cru->scratch_phys);
> +
> + return ret;
> +}
> +
> +static void rzg2l_cru_stop_streaming_vq(struct vb2_queue *vq)
> +{
> + struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vq);
> +
> + rzg2l_cru_stop_streaming(cru);
> +
> + /* Free scratch buffer */
> + dma_free_coherent(cru->dev, cru->format.sizeimage, cru->scratch,
> + cru->scratch_phys);
> +
> + return_unused_buffers(cru, VB2_BUF_STATE_ERROR);
> +}
> +
> +static const struct vb2_ops rzg2l_cru_qops = {
> + .queue_setup = rzg2l_cru_queue_setup,
> + .buf_prepare = rzg2l_cru_buffer_prepare,
> + .buf_queue = rzg2l_cru_buffer_queue,
> + .start_streaming = rzg2l_cru_start_streaming_vq,
> + .stop_streaming = rzg2l_cru_stop_streaming_vq,
> + .wait_prepare = vb2_ops_wait_prepare,
> + .wait_finish = vb2_ops_wait_finish,
> +};
> +
> +static irqreturn_t rzg2l_cru_irq(int irq, void *data)
> +{
> + struct rzg2l_cru_dev *cru = data;
> + unsigned int handled = 0;
> + unsigned long flags;
> + u32 irq_status;
> + u32 amnmbs;
> + int slot;
> +
> + spin_lock_irqsave(&cru->qlock, flags);
> +
> + irq_status = rzg2l_cru_read(cru, CRUnINTS);
> + if (!irq_status)
> + goto done;
> +
> + handled = 1;
> +
> + rzg2l_cru_write(cru, CRUnINTS, rzg2l_cru_read(cru, CRUnINTS));
> +
> + /* Nothing to do if capture status is 'RZG2L_CRU_DMA_STOPPED' */
> + if (cru->state == RZG2L_CRU_DMA_STOPPED) {
> + dev_dbg(cru->dev, "IRQ while state stopped\n");
> + goto done;
> + }
> +
> + /* Increase stop retries if capture status is 'RZG2L_CRU_DMA_STOPPING' */
> + if (cru->state == RZG2L_CRU_DMA_STOPPING) {
> + if (irq_status & CRUnINTS_SFS)
> + dev_dbg(cru->dev, "IRQ while state stopping\n");
> + goto done;
> + }
> +
> + /* Prepare for capture and update state */
> + amnmbs = rzg2l_cru_read(cru, AMnMBS);
> + slot = amnmbs & AMnMBS_MBSTS;
> +
> + /*
> + * AMnMBS.MBSTS indicates the destination of Memory Bank (MB).
> + * Recalculate to get the current transfer complete MB.
> + */
> + if (slot == 0)
> + slot = cru->num_buf - 1;
> + else
> + slot--;
> +
> + /*
> + * To hand buffers back in a known order to userspace start
> + * to capture first from slot 0.
> + */
> + if (cru->state == RZG2L_CRU_DMA_STARTING) {
> + if (slot != 0) {
> + dev_dbg(cru->dev, "Starting sync slot: %d\n", slot);
> + goto done;
> + }
> +
> + dev_dbg(cru->dev, "Capture start synced!\n");
> + cru->state = RZG2L_CRU_DMA_RUNNING;
> + }
> +
> + /* Capture frame */
> + if (cru->queue_buf[slot]) {
> + cru->queue_buf[slot]->field = cru->format.field;
> + cru->queue_buf[slot]->sequence = cru->sequence;
> + cru->queue_buf[slot]->vb2_buf.timestamp = ktime_get_ns();
> + vb2_buffer_done(&cru->queue_buf[slot]->vb2_buf,
> + VB2_BUF_STATE_DONE);
> + cru->queue_buf[slot] = NULL;
> + } else {
> + /* Scratch buffer was used, dropping frame. */
> + dev_dbg(cru->dev, "Dropping frame %u\n", cru->sequence);
> + }
> +
> + cru->sequence++;
> +
> + /* Prepare for next frame */
> + rzg2l_cru_fill_hw_slot(cru, slot);
> +
> +done:
> + spin_unlock_irqrestore(&cru->qlock, flags);
> +
> + return IRQ_RETVAL(handled);
> +}
> +
> +void rzg2l_cru_dma_unregister(struct rzg2l_cru_dev *cru)
> +{
> + mutex_destroy(&cru->lock);
> +
> + v4l2_device_unregister(&cru->v4l2_dev);
> + reset_control_assert(cru->presetn);
> +}
> +
> +int rzg2l_cru_dma_register(struct rzg2l_cru_dev *cru, int irq)
> +{
> + struct vb2_queue *q = &cru->queue;
> + unsigned int i;
> + int ret;
> +
> + ret = reset_control_deassert(cru->presetn);
> + if (ret) {
> + dev_err(cru->dev, "failed to deassert presetn\n");
> + return ret;
> + }
> +
> + /* Initialize the top-level structure */
> + ret = v4l2_device_register(cru->dev, &cru->v4l2_dev);
> + if (ret)
> + return ret;
> +
> + mutex_init(&cru->lock);
> + INIT_LIST_HEAD(&cru->buf_list);
> +
> + spin_lock_init(&cru->qlock);
> +
> + cru->state = RZG2L_CRU_DMA_STOPPED;
> +
> + for (i = 0; i < HW_BUFFER_MAX; i++)
> + cru->queue_buf[i] = NULL;
> +
> + /* buffer queue */
> + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> + q->io_modes = VB2_MMAP | VB2_READ | VB2_DMABUF;
> + q->lock = &cru->lock;
> + q->drv_priv = cru;
> + q->buf_struct_size = sizeof(struct rzg2l_cru_buffer);
> + q->ops = &rzg2l_cru_qops;
> + q->mem_ops = &vb2_dma_contig_memops;
> + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
> + q->min_buffers_needed = 4;
> + q->dev = cru->dev;
> +
> + ret = vb2_queue_init(q);
> + if (ret < 0) {
> + dev_err(cru->dev, "failed to initialize VB2 queue\n");
> + goto error;
> + }
> +
> + /* IRQ */
> + ret = devm_request_irq(cru->dev, irq, rzg2l_cru_irq, IRQF_SHARED,
> + KBUILD_MODNAME, cru);
> + if (ret) {
> + dev_err(cru->dev, "failed to request irq\n");
> + goto error;
> + }
> +
> + return 0;
> +
> +error:
> + rzg2l_cru_dma_unregister(cru);
> + return ret;
> +}
> diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c
> new file mode 100644
> index 000000000000..b1b1bfda7eb1
> --- /dev/null
> +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c
> @@ -0,0 +1,360 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Driver for Renesas RZ/G2L CRU
> + *
> + * Copyright (C) 2022 Renesas Electronics Corp.
> + *
> + * Based on Renesas R-Car VIN
> + * Copyright (C) 2016 Renesas Electronics Corp.
> + * Copyright (C) 2011-2013 Renesas Solutions Corp.
> + * Copyright (C) 2013 Cogent Embedded, Inc., <source@cogentembedded.com>
> + * Copyright (C) 2008 Magnus Damm
> + */
> +
> +#include <linux/pm_runtime.h>
> +
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-ioctl.h>
> +#include <media/v4l2-mc.h>
> +#include <media/v4l2-rect.h>
> +
> +#include "rzg2l-cru.h"
> +
> +#define RZG2L_CRU_DEFAULT_FORMAT V4L2_PIX_FMT_UYVY
> +#define RZG2L_CRU_DEFAULT_WIDTH 800
> +#define RZG2L_CRU_DEFAULT_HEIGHT 600
> +#define RZG2L_CRU_DEFAULT_FIELD V4L2_FIELD_NONE
> +#define RZG2L_CRU_DEFAULT_COLORSPACE V4L2_COLORSPACE_SRGB
> +
> +/* -----------------------------------------------------------------------------
> + * Format Conversions
> + */
> +
> +static const struct v4l2_format_info rzg2l_cru_formats[] = {
> + {
> + .format = V4L2_PIX_FMT_UYVY,
> + .bpp[0] = 2,
> + },
> +};
> +
> +const struct v4l2_format_info *rzg2l_cru_format_from_pixel(u32 format)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(rzg2l_cru_formats); i++)
> + if (rzg2l_cru_formats[i].format == format)
> + return rzg2l_cru_formats + i;
> +
> + return NULL;
> +}
> +
> +static u32 rzg2l_cru_format_bytesperline(struct v4l2_pix_format *pix)
> +{
> + const struct v4l2_format_info *fmt;
> +
> + fmt = rzg2l_cru_format_from_pixel(pix->pixelformat);
> +
> + if (WARN_ON(!fmt))
> + return -EINVAL;
> +
> + return pix->width * fmt->bpp[0];
> +}
> +
> +static u32 rzg2l_cru_format_sizeimage(struct v4l2_pix_format *pix)
> +{
> + return pix->bytesperline * pix->height;
> +}
> +
> +static void rzg2l_cru_format_align(struct rzg2l_cru_dev *cru,
> + struct v4l2_pix_format *pix)
> +{
> + if (!rzg2l_cru_format_from_pixel(pix->pixelformat))
> + pix->pixelformat = RZG2L_CRU_DEFAULT_FORMAT;
> +
> + switch (pix->field) {
> + case V4L2_FIELD_TOP:
> + case V4L2_FIELD_BOTTOM:
> + case V4L2_FIELD_NONE:
> + case V4L2_FIELD_INTERLACED_TB:
> + case V4L2_FIELD_INTERLACED_BT:
> + case V4L2_FIELD_INTERLACED:
> + break;
> + default:
> + pix->field = RZG2L_CRU_DEFAULT_FIELD;
> + break;
> + }
> +
> + /* Limit to CRU capabilities */
> + v4l_bound_align_image(&pix->width, 320, cru->info->max_width, 1,
> + &pix->height, 240, cru->info->max_height, 2, 0);
> +
> + pix->bytesperline = rzg2l_cru_format_bytesperline(pix);
> + pix->sizeimage = rzg2l_cru_format_sizeimage(pix);
> +
> + dev_dbg(cru->dev, "Format %ux%u bpl: %u size: %u\n",
> + pix->width, pix->height, pix->bytesperline, pix->sizeimage);
> +}
> +
> +static void rzg2l_cru_try_format(struct rzg2l_cru_dev *cru,
> + struct v4l2_pix_format *pix)
> +{
> + /*
> + * The V4L2 specification clearly documents the colorspace fields
> + * as being set by drivers for capture devices. Using the values
> + * supplied by userspace thus wouldn't comply with the API. Until
> + * the API is updated force fixed values.
> + */
> + pix->colorspace = RZG2L_CRU_DEFAULT_COLORSPACE;
> + pix->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix->colorspace);
> + pix->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(pix->colorspace);
> + pix->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true, pix->colorspace,
> + pix->ycbcr_enc);
> +
> + rzg2l_cru_format_align(cru, pix);
> +}
> +
> +static int rzg2l_cru_querycap(struct file *file, void *priv,
> + struct v4l2_capability *cap)
> +{
> + struct rzg2l_cru_dev *cru = video_drvdata(file);
> +
> + strscpy(cap->driver, KBUILD_MODNAME, sizeof(cap->driver));
> + strscpy(cap->card, "RZG2L_CRU", sizeof(cap->card));
> + snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
> + dev_name(cru->dev));
> + return 0;
> +}
> +
> +static int rzg2l_cru_try_fmt_vid_cap(struct file *file, void *priv,
> + struct v4l2_format *f)
> +{
> + struct rzg2l_cru_dev *cru = video_drvdata(file);
> +
> + rzg2l_cru_try_format(cru, &f->fmt.pix);
> +
> + return 0;
> +}
> +
> +static int rzg2l_cru_s_fmt_vid_cap(struct file *file, void *priv,
> + struct v4l2_format *f)
> +{
> + struct rzg2l_cru_dev *cru = video_drvdata(file);
> +
> + if (vb2_is_busy(&cru->queue))
> + return -EBUSY;
> +
> + rzg2l_cru_try_format(cru, &f->fmt.pix);
> +
> + cru->format = f->fmt.pix;
> +
> + cru->compose.top = 0;
> + cru->compose.left = 0;
> + cru->compose.width = cru->format.width;
> + cru->compose.height = cru->format.height;
> +
> + return 0;
> +}
> +
> +static int rzg2l_cru_g_fmt_vid_cap(struct file *file, void *priv,
> + struct v4l2_format *f)
> +{
> + struct rzg2l_cru_dev *cru = video_drvdata(file);
> +
> + f->fmt.pix = cru->format;
> +
> + return 0;
> +}
> +
> +static int rzg2l_cru_enum_fmt_vid_cap(struct file *file, void *priv,
> + struct v4l2_fmtdesc *f)
> +{
> + if (f->index >= ARRAY_SIZE(rzg2l_cru_formats))
> + return -EINVAL;
> +
> + f->pixelformat = rzg2l_cru_formats[f->index].format;
> +
> + return 0;
> +}
> +
> +static int rzg2l_cru_subscribe_event(struct v4l2_fh *fh,
> + const struct v4l2_event_subscription *sub)
> +{
> + switch (sub->type) {
> + case V4L2_EVENT_SOURCE_CHANGE:
> + return v4l2_event_subscribe(fh, sub, 4, NULL);
> + }
> + return v4l2_ctrl_subscribe_event(fh, sub);
> +}
> +
> +static const struct v4l2_ioctl_ops rzg2l_cru_ioctl_ops = {
> + .vidioc_querycap = rzg2l_cru_querycap,
> + .vidioc_try_fmt_vid_cap = rzg2l_cru_try_fmt_vid_cap,
> + .vidioc_g_fmt_vid_cap = rzg2l_cru_g_fmt_vid_cap,
> + .vidioc_s_fmt_vid_cap = rzg2l_cru_s_fmt_vid_cap,
> + .vidioc_enum_fmt_vid_cap = rzg2l_cru_enum_fmt_vid_cap,
> +
> + .vidioc_reqbufs = vb2_ioctl_reqbufs,
> + .vidioc_create_bufs = vb2_ioctl_create_bufs,
> + .vidioc_querybuf = vb2_ioctl_querybuf,
> + .vidioc_qbuf = vb2_ioctl_qbuf,
> + .vidioc_dqbuf = vb2_ioctl_dqbuf,
> + .vidioc_expbuf = vb2_ioctl_expbuf,
> + .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
> + .vidioc_streamon = vb2_ioctl_streamon,
> + .vidioc_streamoff = vb2_ioctl_streamoff,
> +
> + .vidioc_log_status = v4l2_ctrl_log_status,
> + .vidioc_subscribe_event = rzg2l_cru_subscribe_event,
> + .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Media controller file operations
> + */
> +
> +static int rzg2l_cru_open(struct file *file)
> +{
> + struct rzg2l_cru_dev *cru = video_drvdata(file);
> + int ret;
> +
> + ret = pm_runtime_resume_and_get(cru->dev);
> + if (ret < 0)
> + return ret;
> +
> + ret = mutex_lock_interruptible(&cru->lock);
> + if (ret)
> + goto err_pm;
> +
> + file->private_data = cru;
> + ret = v4l2_fh_open(file);
> + if (ret)
> + goto err_unlock;
> +
> + ret = v4l2_pipeline_pm_get(&cru->vdev.entity);
> + if (ret < 0)
> + goto err_open;
> +
> + ret = v4l2_ctrl_handler_setup(&cru->ctrl_handler);
> + if (ret)
> + goto err_power;
> +
> + mutex_unlock(&cru->lock);
> +
> + return 0;
> +err_power:
> + v4l2_pipeline_pm_put(&cru->vdev.entity);
> +err_open:
> + v4l2_fh_release(file);
> +err_unlock:
> + mutex_unlock(&cru->lock);
> +err_pm:
> + pm_runtime_put(cru->dev);
> +
> + return ret;
> +}
> +
> +static int rzg2l_cru_release(struct file *file)
> +{
> + struct rzg2l_cru_dev *cru = video_drvdata(file);
> + int ret;
> +
> + mutex_lock(&cru->lock);
> +
> + /* the release helper will cleanup any on-going streaming. */
> + ret = _vb2_fop_release(file, NULL);
> +
> + v4l2_pipeline_pm_put(&cru->vdev.entity);
> + pm_runtime_put(cru->dev);
> +
> + mutex_unlock(&cru->lock);
> +
> + return ret;
> +}
> +
> +static const struct v4l2_file_operations rzg2l_cru_fops = {
> + .owner = THIS_MODULE,
> + .unlocked_ioctl = video_ioctl2,
> + .open = rzg2l_cru_open,
> + .release = rzg2l_cru_release,
> + .poll = vb2_fop_poll,
> + .mmap = vb2_fop_mmap,
> + .read = vb2_fop_read,
> +};
> +
> +void rzg2l_cru_v4l2_unregister(struct rzg2l_cru_dev *cru)
> +{
> + if (!video_is_registered(&cru->vdev))
> + return;
> +
> + v4l2_info(&cru->v4l2_dev, "Removed %s\n",
> + video_device_node_name(&cru->vdev));
> +
> + /* Checks internally if vdev have been init or not */
> + video_unregister_device(&cru->vdev);
> +}
> +
> +static void rzg2l_cru_notify(struct v4l2_subdev *sd,
> + unsigned int notification, void *arg)
> +{
> + struct rzg2l_cru_dev *cru =
> + container_of(sd->v4l2_dev, struct rzg2l_cru_dev, v4l2_dev);
> + struct v4l2_subdev *remote;
> + struct media_pad *pad;
> +
> + pad = media_entity_remote_pad(&cru->pad);
> + if (!pad)
> + return;
> +
> + remote = media_entity_to_v4l2_subdev(pad->entity);
> + if (remote != sd)
> + return;
> +
> + switch (notification) {
> + case V4L2_DEVICE_NOTIFY_EVENT:
> + v4l2_event_queue(&cru->vdev, arg);
> + break;
> + }
> +}
> +
> +int rzg2l_cru_v4l2_register(struct rzg2l_cru_dev *cru)
> +{
> + struct video_device *vdev = &cru->vdev;
> + int ret;
> +
> + cru->v4l2_dev.notify = rzg2l_cru_notify;
> +
> + /* video node */
> + vdev->v4l2_dev = &cru->v4l2_dev;
> + vdev->queue = &cru->queue;
> + snprintf(vdev->name, sizeof(vdev->name), "CRU output");
> + vdev->release = video_device_release_empty;
> + vdev->lock = &cru->lock;
> + vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
> + V4L2_CAP_READWRITE;
> +
> + /* Set a default format */
> + cru->format.pixelformat = RZG2L_CRU_DEFAULT_FORMAT;
> + cru->format.width = RZG2L_CRU_DEFAULT_WIDTH;
> + cru->format.height = RZG2L_CRU_DEFAULT_HEIGHT;
> + cru->format.field = RZG2L_CRU_DEFAULT_FIELD;
> + cru->format.colorspace = RZG2L_CRU_DEFAULT_COLORSPACE;
> +
> + vdev->device_caps |= V4L2_CAP_IO_MC;
> + vdev->fops = &rzg2l_cru_fops;
> + vdev->ioctl_ops = &rzg2l_cru_ioctl_ops;
> +
> + rzg2l_cru_format_align(cru, &cru->format);
> +
> + ret = video_register_device(&cru->vdev, VFL_TYPE_VIDEO, -1);
> + if (ret) {
> + dev_err(cru->dev, "Failed to register video device\n");
> + return ret;
> + }
> +
> + video_set_drvdata(&cru->vdev, cru);
> +
> + v4l2_info(&cru->v4l2_dev, "Device registered as %s\n",
> + video_device_node_name(&cru->vdev));
> +
> + return ret;
> +}
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [RFC PATCH v2 3/4] media: platform: Add CRU driver for RZ/G2L SoC
2022-02-15 14:40 ` Jacopo Mondi
@ 2022-02-15 15:45 ` Niklas Söderlund
2022-03-22 0:08 ` Lad, Prabhakar
1 sibling, 0 replies; 17+ messages in thread
From: Niklas Söderlund @ 2022-02-15 15:45 UTC (permalink / raw)
To: Jacopo Mondi
Cc: Lad Prabhakar, Philipp Zabel, Mauro Carvalho Chehab, Rob Herring,
Laurent Pinchart, Sakari Ailus, Hans Verkuil, Geert Uytterhoeven,
linux-media, linux-renesas-soc, devicetree, linux-kernel,
Prabhakar, Biju Das
Hello,
On 2022-02-15 15:40:18 +0100, Jacopo Mondi wrote:
> Hello Prabhakar,
>
> On Fri, Jan 21, 2022 at 01:05:42AM +0000, Lad Prabhakar wrote:
> > Add v4l driver for Renesas RZ/G2L Camera data Receiving Unit.
> >
> > Based on a patch in the BSP by Hien Huynh
> > <hien.huynh.px@renesas.com>
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > v1->v2
> > * Dropped group
> > * Dropped CSI subdev and implemented as new driver
> > * Dropped "mc_" from function names
> > * Moved the driver to renesas folder
> > ---
> > drivers/media/platform/Kconfig | 1 +
> > drivers/media/platform/Makefile | 2 +
> > .../media/platform/renesas/rzg2l-cru/Kconfig | 15 +
> > .../media/platform/renesas/rzg2l-cru/Makefile | 4 +
> > .../platform/renesas/rzg2l-cru/rzg2l-core.c | 432 +++++++++++
> > .../platform/renesas/rzg2l-cru/rzg2l-cru.h | 155 ++++
> > .../platform/renesas/rzg2l-cru/rzg2l-dma.c | 722 ++++++++++++++++++
> > .../platform/renesas/rzg2l-cru/rzg2l-v4l2.c | 360 +++++++++
>
> Niklas, Laurent, this series introduces drivers/media/platform/renesas
>
> Should the several renesas driver be moved there ?
I can see both good and bad sides of creating a Renesas directory. I
like that 'git blame' is easy if we don't move files around to much so I
think my preference is to keep files where there are unless, we get some
other advantage in moving them other then it's a neat grouping?
>
> In that case I would suggest a
> drivers/media/platform/renesas/Kconfig|Makefile instead of instructing
> drivers/media/Kconfig|Makefile to fish in
> drivers/media/platform/renesas/rzg2l-cru/
If they are moved I agree with you about collecting things in a common
Makefile and Kconfig.
>
> > 8 files changed, 1691 insertions(+)
> > create mode 100644 drivers/media/platform/renesas/rzg2l-cru/Kconfig
> > create mode 100644 drivers/media/platform/renesas/rzg2l-cru/Makefile
> > create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c
> > create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h
> > create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c
> > create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c
> >
> > diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> > index cf4adc64c953..4251c5686c2a 100644
> > --- a/drivers/media/platform/Kconfig
> > +++ b/drivers/media/platform/Kconfig
> > @@ -169,6 +169,7 @@ source "drivers/media/platform/exynos4-is/Kconfig"
> > source "drivers/media/platform/am437x/Kconfig"
> > source "drivers/media/platform/xilinx/Kconfig"
> > source "drivers/media/platform/rcar-vin/Kconfig"
> > +source "drivers/media/platform/renesas/rzg2l-cru/Kconfig"
> > source "drivers/media/platform/atmel/Kconfig"
> > source "drivers/media/platform/sunxi/Kconfig"
> >
> > diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
> > index a148553babfc..021d30a2c66c 100644
> > --- a/drivers/media/platform/Makefile
> > +++ b/drivers/media/platform/Makefile
> > @@ -66,6 +66,8 @@ obj-$(CONFIG_VIDEO_XILINX) += xilinx/
> > obj-$(CONFIG_VIDEO_RCAR_ISP) += rcar-isp.o
> > obj-$(CONFIG_VIDEO_RCAR_VIN) += rcar-vin/
> >
> > +obj-$(CONFIG_VIDEO_RZG2L_CRU) += renesas/rzg2l-cru/
> > +
> > obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel/
> > obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel/
> > obj-$(CONFIG_VIDEO_ATMEL_XISC) += atmel/
> > diff --git a/drivers/media/platform/renesas/rzg2l-cru/Kconfig b/drivers/media/platform/renesas/rzg2l-cru/Kconfig
> > new file mode 100644
> > index 000000000000..310baa4d4c14
> > --- /dev/null
> > +++ b/drivers/media/platform/renesas/rzg2l-cru/Kconfig
> > @@ -0,0 +1,15 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +
> > +config VIDEO_RZG2L_CRU
> > + tristate "RZ/G2L Camera Receiving Unit (CRU) Driver"
> > + depends on VIDEO_V4L2 && OF
> > + depends on ARCH_RENESAS || COMPILE_TEST
> > + select MEDIA_CONTROLLER
> > + select VIDEO_V4L2_SUBDEV_API
> > + select VIDEOBUF2_DMA_CONTIG
> > + select V4L2_FWNODE
> > + help
> > + Support for Renesas RZ/G2L Camera Receiving Unit (CRU) driver.
> > +
> > + To compile this driver as a module, choose M here: the
> > + module will be called rzg2l-cru.
> > diff --git a/drivers/media/platform/renesas/rzg2l-cru/Makefile b/drivers/media/platform/renesas/rzg2l-cru/Makefile
> > new file mode 100644
> > index 000000000000..8c307075f131
> > --- /dev/null
> > +++ b/drivers/media/platform/renesas/rzg2l-cru/Makefile
> > @@ -0,0 +1,4 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +rzg2l-cru-objs = rzg2l-core.o rzg2l-dma.o rzg2l-v4l2.o
> > +
> > +obj-$(CONFIG_VIDEO_RZG2L_CRU) += rzg2l-cru.o
> > diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c
> > new file mode 100644
> > index 000000000000..881bedaaff8f
> > --- /dev/null
> > +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c
> > @@ -0,0 +1,432 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Driver for Renesas RZ/G2L CRU
> > + *
> > + * Copyright (C) 2022 Renesas Electronics Corp.
> > + *
> > + * Based on Renesas R-Car VIN
> > + * Copyright (C) 2011-2013 Renesas Solutions Corp.
> > + * Copyright (C) 2013 Cogent Embedded, Inc., <source@cogentembedded.com>
> > + * Copyright (C) 2008 Magnus Damm
> > + */
> > +
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/of_graph.h>
>
> <linux/mod_devicetable.h> for struct of_device_id.
> Even if I assume it's included by other headers
>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/slab.h>
>
> Is slab.h needed ?
>
> > +#include <linux/sys_soc.h>
>
> Also sys_soc.h seems not needed
>
> > +
> > +#include <media/v4l2-async.h>
>
> v4l2-async is included by rzg2l-cru.h
>
> > +#include <media/v4l2-fwnode.h>
> > +#include <media/v4l2-mc.h>
> > +
> > +#include "rzg2l-cru.h"
> > +
> > +#define v4l2_dev_to_cru(d) container_of(d, struct rzg2l_cru_dev, v4l2_dev)
> > +
> > +static int rzg2l_cru_csi2_link_notify(struct media_link *link, u32 flags,
> > + unsigned int notification)
> > +{
> > + struct media_entity *entity;
> > + struct rzg2l_cru_dev *cru;
> > + struct video_device *vdev;
> > + struct media_pad *csi_pad;
> > + struct v4l2_subdev *sd;
> > + int ret;
> > +
> > + ret = v4l2_pipeline_link_notify(link, flags, notification);
> > + if (ret)
> > + return ret;
> > +
> > + /* Only care about link enablement for CRU nodes. */
> > + if (!(flags & MEDIA_LNK_FL_ENABLED) ||
> > + !is_media_entity_v4l2_video_device(link->sink->entity))
>
> Can you get a notification for an entity which is not your video
> device one ?
>
> > + return 0;
> > +
> > + cru = container_of(link->graph_obj.mdev, struct rzg2l_cru_dev, mdev);
> > + /*
> > + * Don't allow link changes if any entity in the graph is
> > + * streaming, modifying the CHSEL register fields can disrupt
> > + * running streams.
> > + */
> > + media_device_for_each_entity(entity, &cru->mdev)
> > + if (entity->pads->stream_count)
> > + return -EBUSY;
> > +
> > + mutex_lock(&cru->mdev_lock);
> > + vdev = media_entity_to_video_device(link->sink->entity);
> > +
> > + csi_pad = media_entity_remote_pad(&cru->vdev.entity.pads[0]);
> > + if (csi_pad) {
> > + ret = -EMLINK;
> > + goto out;
> > + }
> > +
> > + sd = media_entity_to_v4l2_subdev(link->source->entity);
> > + if (cru->csi.subdev == sd) {
> > + cru->csi.channel = link->source->index - 1;
>
> So the virtual channel selection is done based on the CSI-2 source pad
> number connected to single video dev sink pad.
>
> I then wonder what the rzg2l_csi2_get_frame_desc() is used for (since
> it is not called from here afaict).
>
> I think, since there doesn't seem to be any complex routing in the CRU
> as there is in VINs, that the VC the CSI-2 rx receives as input should
> be propagated to this driver by inspecting the CSI-2 frame desc ? Or
> is there any routing I have missed like there is one between the R-Car
> CSI-2 rx and R-Car VIN ?
>
> In the R-Car VIN driver the links setup between
> csi-2 and vin serves to set-up the pixel link and route data between
> the CSI-2 and the VIN but here it seems the CRU wants the virtual
> channel as received from the CSI-2 rx ?
>
> VCSEL[1:0]
> Specify a virtual channel to be processed by the image processing module.
> A single channel specified by the register is selected from virtual channels 0 to 3.
>
> As the CRU can capture one VC at the time if I got it right.
>
> > + cru->is_csi = true;
> > + } else {
> > + ret = -ENODEV;
>
> So using a parallel sensor would return -ENODEV ?
>
> > + }
> > +
> > +out:
> > + mutex_unlock(&cru->mdev_lock);
> > +
> > + return ret;
> > +}
> > +
> > +static const struct media_device_ops rzg2l_cru_media_ops = {
> > + .link_notify = rzg2l_cru_csi2_link_notify,
> > +};
> > +
> > +static void rzg2l_cru_put(struct rzg2l_cru_dev *cru)
> > +{
> > + mutex_lock(&cru->mdev_lock);
> > + cru->v4l2_dev.mdev = NULL;
> > + mutex_unlock(&cru->mdev_lock);
> > +}
>
> Called from a single place, could be open coded and I'm not sure it
> needs any locking, as the single caller is in the driver probe() call
> path
>
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Group async notifier
> > + */
> > +
> > +static int rzg2l_cru_group_notify_complete(struct v4l2_async_notifier *notifier)
>
> Compared to R-Car VIN, where the CSI-2 rx instances can be routed to
> several VINs, don't the CRU and CSI-2 rx for the RZ/GL always go
> together. IOW will there be multiple CSI-2 rx instances connected to a
> single CRU ? If not, this can be simplified and the whole concept of
> 'group' can be removed ?
>
> > +{
> > + struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev);
> > + unsigned int i;
> > + int ret;
> > +
> > + ret = media_device_register(&cru->mdev);
> > + if (ret)
> > + return ret;
> > +
> > + ret = v4l2_device_register_subdev_nodes(&cru->v4l2_dev);
> > + if (ret) {
> > + dev_err(cru->dev, "Failed to register subdev nodes\n");
> > + return ret;
> > + }
> > +
> > + if (!video_is_registered(&cru->vdev)) {
> > + ret = rzg2l_cru_v4l2_register(cru);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + /* Create all media device links between CRU and CSI-2's. */
> > + for (i = 1; i <= CSI2_VCHANNEL; i++) {
> > + struct media_entity *source, *sink;
> > +
> > + source = &cru->csi.subdev->entity;
> > + sink = &cru->vdev.entity;
> > +
> > + ret = media_create_pad_link(source, i, sink, 0, 0);
> > + if (ret) {
> > + dev_err(cru->dev, "Error adding link from %s to %s\n",
> > + source->name, sink->name);
> > + break;
> > + }
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static void rzg2l_cru_group_notify_unbind(struct v4l2_async_notifier *notifier,
> > + struct v4l2_subdev *subdev,
> > + struct v4l2_async_subdev *asd)
> > +{
> > + struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev);
> > +
> > + rzg2l_cru_v4l2_unregister(cru);
> > +
> > + mutex_lock(&cru->mdev_lock);
>
> Is locking needed ?
> > +
> > + if (cru->csi.asd == asd) {
> > + cru->csi.subdev = NULL;
> > + dev_dbg(cru->dev, "Unbind CSI-2 %s\n", subdev->name);
> > + }
> > +
> > + mutex_unlock(&cru->mdev_lock);
> > +
> > + media_device_unregister(&cru->mdev);
> > +}
> > +
> > +static int rzg2l_cru_group_notify_bound(struct v4l2_async_notifier *notifier,
> > + struct v4l2_subdev *subdev,
> > + struct v4l2_async_subdev *asd)
> > +{
> > + struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev);
> > + unsigned int i;
> > +
> > + mutex_lock(&cru->mdev_lock);
>
> Is locking needed ?
>
> > +
> > + if (cru->csi.asd == asd) {
> > + cru->csi.subdev = subdev;
> > + dev_dbg(cru->dev, "Bound CSI-2 %s to slot %u\n", subdev->name, i);
> > + }
> > +
> > + mutex_unlock(&cru->mdev_lock);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct v4l2_async_notifier_operations rzg2l_cru_async_ops = {
> > + .bound = rzg2l_cru_group_notify_bound,
> > + .unbind = rzg2l_cru_group_notify_unbind,
> > + .complete = rzg2l_cru_group_notify_complete,
> > +};
> > +
> > +static int rvin_mc_parse_of(struct rzg2l_cru_dev *cru, unsigned int id)
> > +{
> > + struct v4l2_fwnode_endpoint vep = {
> > + .bus_type = V4L2_MBUS_CSI2_DPHY,
> > + };
> > + struct fwnode_handle *ep, *fwnode;
> > + struct v4l2_async_subdev *asd;
> > + int ret;
> > +
> > + ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(cru->dev), 1, id, 0);
> > + if (!ep)
> > + return 0;
> > +
> > + fwnode = fwnode_graph_get_remote_endpoint(ep);
> > + ret = v4l2_fwnode_endpoint_parse(ep, &vep);
> > + fwnode_handle_put(ep);
> > + if (ret) {
> > + dev_err(cru->dev, "Failed to parse %pOF\n", to_of_node(fwnode));
> > + ret = -EINVAL;
> > + goto out;
> > + }
> > +
> > + if (!of_device_is_available(to_of_node(fwnode))) {
> > + dev_dbg(cru->dev, "OF device %pOF disabled, ignoring\n",
> > + to_of_node(fwnode));
> > + ret = -ENOTCONN;
> > + goto out;
> > + }
> > +
> > + asd = v4l2_async_nf_add_fwnode(&cru->notifier, fwnode,
> > + struct v4l2_async_subdev);
> > + if (IS_ERR(asd)) {
> > + ret = PTR_ERR(asd);
> > + goto out;
> > + }
> > +
> > + cru->csi.asd = asd;
> > +
> > + dev_dbg(cru->dev, "Added OF device %pOF to slot %u\n",
> > + to_of_node(fwnode), vep.base.id);
> > +out:
> > + fwnode_handle_put(fwnode);
> > +
> > + return ret;
> > +}
> > +
> > +static int rzg2l_cru_mc_parse_of_graph(struct rzg2l_cru_dev *cru)
> > +{
> > + int ret;
> > +
> > + v4l2_async_nf_init(&cru->notifier);
> > +
> > + ret = rvin_mc_parse_of(cru, 0);
> > + if (ret)
> > + return ret;
> > +
> > + cru->notifier.ops = &rzg2l_cru_async_ops;
> > +
> > + if (list_empty(&cru->notifier.asd_list))
> > + return 0;
> > +
> > + ret = v4l2_async_nf_register(&cru->v4l2_dev, &cru->notifier);
> > + if (ret < 0) {
> > + dev_err(cru->dev, "Notifier registration failed\n");
> > + v4l2_async_nf_cleanup(&cru->notifier);
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int rzg2l_cru_csi2_init(struct rzg2l_cru_dev *cru)
> > +{
> > + struct media_device *mdev = NULL;
> > + const struct of_device_id *match;
> > + int ret;
> > +
> > + cru->pad.flags = MEDIA_PAD_FL_SINK;
> > + ret = media_entity_pads_init(&cru->vdev.entity, 1, &cru->pad);
> > + if (ret)
> > + return ret;
> > +
> > + mutex_init(&cru->mdev_lock);
> > + mdev = &cru->mdev;
> > + mdev->dev = cru->dev;
> > + mdev->ops = &rzg2l_cru_media_ops;
> > +
> > + match = of_match_node(cru->dev->driver->of_match_table,
> > + cru->dev->of_node);
> > +
> > + strscpy(mdev->driver_name, KBUILD_MODNAME, sizeof(mdev->driver_name));
> > + strscpy(mdev->model, match->compatible, sizeof(mdev->model));
> > + snprintf(mdev->bus_info, sizeof(mdev->bus_info), "platform:%s",
> > + dev_name(mdev->dev));
> > +
> > + cru->v4l2_dev.mdev = &cru->mdev;
> > +
> > + media_device_init(mdev);
> > +
> > + ret = rzg2l_cru_mc_parse_of_graph(cru);
> > + if (ret)
> > + rzg2l_cru_put(cru);
> > +
> > + return 0;
> > +}
> > +
> > +static int rzg2l_cru_s_ctrl(struct v4l2_ctrl *ctrl)
> > +{
> > + struct rzg2l_cru_dev *cru = container_of(ctrl->handler,
> > + struct rzg2l_cru_dev,
> > + ctrl_handler);
> > + int ret = 0;
> > +
> > + switch (ctrl->id) {
> > + case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE:
>
> What is the purpose of having this controllable with a ctrl ?
>
> > + if (cru->state == RZG2L_CRU_DMA_STOPPED ||
> > + cru->state == RZG2L_CRU_DMA_STOPPING)
> > + cru->num_buf = ctrl->val;
> > + else
> > + ret = -EBUSY;
> > +
> > + break;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static const struct v4l2_ctrl_ops rzg2l_cru_ctrl_ops = {
> > + .s_ctrl = rzg2l_cru_s_ctrl,
> > +};
> > +
> > +static int rzg2l_cru_probe(struct platform_device *pdev)
> > +{
> > + struct rzg2l_cru_dev *cru;
> > + struct v4l2_ctrl *ctrl;
> > + int irq, ret;
> > +
> > + cru = devm_kzalloc(&pdev->dev, sizeof(*cru), GFP_KERNEL);
> > + if (!cru)
> > + return -ENOMEM;
> > +
> > + cru->base = devm_platform_ioremap_resource(pdev, 0);
> > + if (IS_ERR(cru->base))
> > + return PTR_ERR(cru->base);
> > +
> > + cru->presetn = devm_reset_control_get(&pdev->dev, "presetn");
> > + if (IS_ERR(cru->presetn))
> > + return dev_err_probe(&pdev->dev, PTR_ERR(cru->presetn),
> > + "failed to get cpg presetn\n");
> > +
> > + cru->aresetn = devm_reset_control_get(&pdev->dev, "aresetn");
> > + if (IS_ERR(cru->aresetn))
> > + return dev_err_probe(&pdev->dev, PTR_ERR(cru->aresetn),
> > + "failed to get cpg aresetn\n");
> > +
> > + cru->dev = &pdev->dev;
> > + cru->info = of_device_get_match_data(&pdev->dev);
> > +
> > + irq = platform_get_irq(pdev, 0);
> > + if (irq < 0)
> > + return irq;
> > +
> > + ret = rzg2l_cru_dma_register(cru, irq);
> > + if (ret)
> > + return ret;
> > +
> > + platform_set_drvdata(pdev, cru);
> > +
> > + ret = rzg2l_cru_csi2_init(cru);
> > + if (ret)
> > + goto error_dma_unregister;
> > +
> > + v4l2_ctrl_handler_init(&cru->ctrl_handler, 1);
> > + ctrl = v4l2_ctrl_new_std(&cru->ctrl_handler, &rzg2l_cru_ctrl_ops,
> > + V4L2_CID_MIN_BUFFERS_FOR_CAPTURE,
> > + 1, HW_BUFFER_MAX, 1, HW_BUFFER_DEFAULT);
> > + if (cru->ctrl_handler.error) {
> > + dev_err(&pdev->dev, "%s: control initialization error %d\n",
> > + __func__, cru->ctrl_handler.error);
> > + ret = cru->ctrl_handler.error;
> > + goto free_ctrl;
> > + }
> > +
> > + ctrl->flags &= ~V4L2_CTRL_FLAG_READ_ONLY;
>
> Is this necessary ?
>
> > + cru->v4l2_dev.ctrl_handler = &cru->ctrl_handler;
> > +
> > + cru->num_buf = HW_BUFFER_DEFAULT;
> > +
> > + pm_suspend_ignore_children(&pdev->dev, true);
> > + pm_runtime_enable(&pdev->dev);
>
> Are there pm_runtime operations associated with this driver ?
>
> > +
> > + return 0;
> > +
> > +free_ctrl:
> > + v4l2_ctrl_handler_free(&cru->ctrl_handler);
> > +error_dma_unregister:
> > + rzg2l_cru_dma_unregister(cru);
> > +
> > + return ret;
> > +}
> > +
> > +static const struct rzg2l_cru_info rzg2l_cru_info_generic = {
> > + .max_width = 2800,
> > + .max_height = 4096,
> > +};
>
> This implies you expect different revisions to have differe input size
> limitations, right ?
>
> > +
> > +static const struct of_device_id rzg2l_cru_of_id_table[] = {
> > + {
> > + .compatible = "renesas,rzg2l-cru",
> > + .data = &rzg2l_cru_info_generic,
> > + },
> > + { /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, rzg2l_cru_of_id_table);
> > +
> > +static int rzg2l_cru_remove(struct platform_device *pdev)
> > +{
> > + struct rzg2l_cru_dev *cru = platform_get_drvdata(pdev);
> > +
> > + pm_runtime_disable(&pdev->dev);
> > +
> > + rzg2l_cru_v4l2_unregister(cru);
> > +
> > + v4l2_async_nf_unregister(&cru->notifier);
> > + v4l2_async_nf_cleanup(&cru->notifier);
> > +
> > + media_device_cleanup(&cru->mdev);
> > + mutex_destroy(&cru->mdev_lock);
> > + cru->v4l2_dev.mdev = NULL;
> > +
> > + v4l2_ctrl_handler_free(&cru->ctrl_handler);
> > + cru->vdev.ctrl_handler = NULL;
> > +
> > + rzg2l_cru_dma_unregister(cru);
> > +
> > + return 0;
> > +}
> > +
> > +static struct platform_driver rzg2l_cru_driver = {
> > + .driver = {
> > + .name = "rzg2l-cru",
> > + .of_match_table = rzg2l_cru_of_id_table,
> > + },
> > + .probe = rzg2l_cru_probe,
> > + .remove = rzg2l_cru_remove,
> > +};
> > +
> > +module_platform_driver(rzg2l_cru_driver);
> > +
> > +MODULE_DESCRIPTION("Renesas RZ/G2L CRU driver");
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h
> > new file mode 100644
> > index 000000000000..91a28279846e
> > --- /dev/null
> > +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h
> > @@ -0,0 +1,155 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +/*
> > + * Driver for Renesas RZ/G2L CRU
> > + *
> > + * Copyright (C) 2022 Renesas Electronics Corp.
> > + *
> > + */
> > +
> > +#ifndef __RZG2L_CRU__
> > +#define __RZG2L_CRU__
> > +
> > +#include <linux/clk.h>
> > +#include <linux/reset.h>
> > +
> > +#include <media/v4l2-async.h>
> > +#include <media/v4l2-ctrls.h>
> > +#include <media/v4l2-dev.h>
> > +#include <media/v4l2-device.h>
> > +#include <media/videobuf2-v4l2.h>
> > +
> > +/* Number of HW buffers */
> > +#define HW_BUFFER_MAX 8
> > +#define HW_BUFFER_DEFAULT 3
> > +
> > +/* Address alignment mask for HW buffers */
> > +#define HW_BUFFER_MASK 0x1ff
> > +
> > +/* Maximum number of CSI2 virtual channels */
> > +#define CSI2_VCHANNEL 4
> > +
> > +/**
> > + * enum rzg2l_cru_dma_state - DMA states
> > + * @RZG2L_CRU_DMA_STOPPED: No operation in progress
> > + * @RZG2L_CRU_DMA_STARTING: Capture starting up
> > + * @RZG2L_CRU_DMA_RUNNING: Operation in progress have buffers
> > + * @RZG2L_CRU_DMA_STOPPING: Stopping operation
> > + */
> > +enum rzg2l_cru_dma_state {
> > + RZG2L_CRU_DMA_STOPPED = 0,
> > + RZG2L_CRU_DMA_STARTING,
> > + RZG2L_CRU_DMA_RUNNING,
> > + RZG2L_CRU_DMA_STOPPING,
> > +};
> > +
> > +/**
> > + * struct rzg2l_cru_info - Information about the particular CRU implementation
> > + * @max_width: max input width the CRU supports
> > + * @max_height: max input height the CRU supports
> > + */
> > +struct rzg2l_cru_info {
> > + unsigned int max_width;
> > + unsigned int max_height;
> > +};
> > +
> > +struct rzg2l_cru_csi {
> > + struct v4l2_async_subdev *asd;
> > + struct v4l2_subdev *subdev;
> > + u32 channel;
> > +};
> > +
> > +/**
> > + * struct rzg2l_cru_dev - Renesas CRU device structure
> > + * @dev: (OF) device
> > + * @base: device I/O register space remapped to virtual memory
> > + * @info: info about CRU instance
> > + *
> > + * @presetn: CRU_PRESETN reset line
> > + * @aresetn: CRU_ARESETN reset line
> > + *
> > + * @vdev: V4L2 video device associated with CRU
> > + * @v4l2_dev: V4L2 device
> > + * @ctrl_handler: V4L2 control handler
> > + * @num_buf: Holds the current number of buffers enabled
> > + * @notifier: V4L2 asynchronous subdevs notifier
> > + *
> > + * @csi: CSI info
> > + * @mdev: media device
> > + * @mdev_lock: protects the count, notifier and csi members
> > + * @pad: media pad for the video device entity
> > + *
> > + * @lock: protects @queue
> > + * @queue: vb2 buffers queue
> > + * @scratch: cpu address for scratch buffer
> > + * @scratch_phys: physical address of the scratch buffer
> > + *
> > + * @qlock: protects @queue_buf, @buf_list, @sequence
> > + * @state
> > + * @queue_buf: Keeps track of buffers given to HW slot
> > + * @buf_list: list of queued buffers
> > + * @sequence: V4L2 buffers sequence number
> > + * @state: keeps track of operation state
> > + *
> > + * @is_csi: flag to mark the CRU as using a CSI-2 subdevice
> > + *
> > + * @input_is_yuv: flag to mark the input format of CRU
> > + * @output_is_yuv: flag to mark the output format of CRU
> > + *
> > + * @mbus_code: media bus format code
> > + * @format: active V4L2 pixel format
> > + *
> > + * @compose: active composing
> > + * @source: active size of the video source
> > + * @std: active video standard of the video source
>
>
> These last fields seems not to be present in the structure
>
> > + */
> > +struct rzg2l_cru_dev {
> > + struct device *dev;
> > + void __iomem *base;
> > + const struct rzg2l_cru_info *info;
> > +
> > + struct reset_control *presetn;
> > + struct reset_control *aresetn;
> > +
> > + struct video_device vdev;
> > + struct v4l2_device v4l2_dev;
> > + struct v4l2_ctrl_handler ctrl_handler;
> > + u8 num_buf;
> > +
> > + struct v4l2_async_notifier notifier;
> > +
> > + struct rzg2l_cru_csi csi;
> > + struct media_device mdev;
> > + struct mutex mdev_lock;
> > + struct media_pad pad;
> > +
> > + struct mutex lock;
> > + struct vb2_queue queue;
> > + void *scratch;
> > + dma_addr_t scratch_phys;
> > +
> > + spinlock_t qlock;
> > + struct vb2_v4l2_buffer *queue_buf[HW_BUFFER_MAX];
> > + struct list_head buf_list;
> > + unsigned int sequence;
> > + enum rzg2l_cru_dma_state state;
> > +
> > + bool is_csi;
> > +
> > + bool input_is_yuv;
> > + bool output_is_yuv;
> > +
> > + u32 mbus_code;
> > + struct v4l2_pix_format format;
> > +
> > + struct v4l2_rect compose;
> > +};
> > +
> > +int rzg2l_cru_dma_register(struct rzg2l_cru_dev *cru, int irq);
> > +void rzg2l_cru_dma_unregister(struct rzg2l_cru_dev *cru);
> > +
> > +int rzg2l_cru_v4l2_register(struct rzg2l_cru_dev *cru);
> > +void rzg2l_cru_v4l2_unregister(struct rzg2l_cru_dev *cru);
> > +
> > +const struct v4l2_format_info *rzg2l_cru_format_from_pixel(u32 format);
> > +
> > +#endif
> > diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c
> > new file mode 100644
> > index 000000000000..0fcf4baccca9
> > --- /dev/null
> > +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c
> > @@ -0,0 +1,722 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Driver for Renesas RZ/G2L CRU
> > + *
> > + * Copyright (C) 2022 Renesas Electronics Corp.
> > + *
> > + * Based on Renesas R-Car VIN
> > + * Copyright (C) 2011-2013 Renesas Solutions Corp.
> > + * Copyright (C) 2013 Cogent Embedded, Inc., <source@cogentembedded.com>
> > + * Copyright (C) 2008 Magnus Damm
> > + */
> > +
> > +#include <linux/delay.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/module.h>
> > +#include <linux/pm_runtime.h>
> > +
> > +#include <media/videobuf2-dma-contig.h>
> > +
> > +#include "rzg2l-cru.h"
> > +
> > +/* HW CRU Registers Definition */
> > +/* CRU Control Register */
> > +#define CRUnCTRL 0x0
> > +#define CRUnCTRL_VINSEL(x) ((x) << 0)
> > +
> > +/* CRU Interrupt Enable Register */
> > +#define CRUnIE 0x4
> > +#define CRUnIE_SFE BIT(16)
> > +#define CRUnIE_EFE BIT(17)
> > +
> > +/* CRU Interrupt Status Register */
> > +#define CRUnINTS 0x8
> > +#define CRUnINTS_SFS BIT(16)
> > +
> > +/* CRU Reset Register */
> > +#define CRUnRST 0xc
> > +#define CRUnRST_VRESETN BIT(0)
> > +
> > +/* Memory Bank Base Address (Lower) Register for CRU Image Data */
> > +#define AMnMBxADDRL(x) (0x100 + ((x) * 8))
> > +
> > +/* Memory Bank Base Address (Higher) Register for CRU Image Data */
> > +#define AMnMBxADDRH(x) (0x104 + ((x) * 8))
> > +
> > +/* Memory Bank Enable Register for CRU Image Data */
> > +#define AMnMBVALID 0x148
> > +#define AMnMBVALID_MBVALID(x) GENMASK(x, 0)
> > +
> > +/* Memory Bank Status Register for CRU Image Data */
> > +#define AMnMBS 0x14c
> > +#define AMnMBS_MBSTS 0x7
> > +
> > +/* AXI Master FIFO Pointer Register for CRU Image Data */
> > +#define AMnFIFOPNTR 0x168
> > +#define AMnFIFOPNTR_FIFOWPNTR GENMASK(7, 0)
> > +#define AMnFIFOPNTR_FIFORPNTR_Y GENMASK(23, 16)
> > +
> > +/* AXI Master Transfer Stop Register for CRU Image Data */
> > +#define AMnAXISTP 0x174
> > +#define AMnAXISTP_AXI_STOP BIT(0)
> > +
> > +/* AXI Master Transfer Stop Status Register for CRU Image Data */
> > +#define AMnAXISTPACK 0x178
> > +#define AMnAXISTPACK_AXI_STOP_ACK BIT(0)
> > +
> > +/* CRU Image Processing Enable Register */
> > +#define ICnEN 0x200
> > +#define ICnEN_ICEN BIT(0)
> > +
> > +/* CRU Image Processing Main Control Register */
> > +#define ICnMC 0x208
> > +#define ICnMC_CSCTHR BIT(5)
> > +#define ICnMC_INF_YUV8_422 (0x1e << 16)
> > +#define ICnMC_INF_USER (0x30 << 16)
> > +#define ICnMC_VCSEL(x) ((x) << 22)
> > +#define ICnMC_INF_MASK GENMASK(21, 16)
> > +
> > +/* CRU Module Status Register */
> > +#define ICnMS 0x254
> > +#define ICnMS_IA BIT(2)
> > +
> > +/* CRU Data Output Mode Register */
> > +#define ICnDMR 0x26c
> > +#define ICnDMR_YCMODE_UYVY (1 << 4)
> > +
> > +#define RZG2L_TIMEOUT_MS 100
> > +#define RZG2L_RETRIES 10
> > +
> > +struct rzg2l_cru_buffer {
> > + struct vb2_v4l2_buffer vb;
> > + struct list_head list;
> > +};
> > +
> > +#define to_buf_list(vb2_buffer) (&container_of(vb2_buffer, \
> > + struct rzg2l_cru_buffer, \
> > + vb)->list)
> > +
> > +static void rzg2l_cru_write(struct rzg2l_cru_dev *cru, u32 offset, u32 value)
> > +{
> > + iowrite32(value, cru->base + offset);
> > +}
> > +
> > +static u32 rzg2l_cru_read(struct rzg2l_cru_dev *cru, u32 offset)
> > +{
> > + return ioread32(cru->base + offset);
> > +}
> > +
> > +/* Need to hold qlock before calling */
> > +static void return_unused_buffers(struct rzg2l_cru_dev *cru,
> > + enum vb2_buffer_state state)
> > +{
> > + struct rzg2l_cru_buffer *buf, *node;
> > + unsigned long flags;
> > + unsigned int i;
> > +
> > + spin_lock_irqsave(&cru->qlock, flags);
> > + for (i = 0; i < cru->num_buf; i++) {
> > + if (cru->queue_buf[i]) {
> > + vb2_buffer_done(&cru->queue_buf[i]->vb2_buf,
> > + state);
> > + cru->queue_buf[i] = NULL;
> > + }
> > + }
> > +
> > + list_for_each_entry_safe(buf, node, &cru->buf_list, list) {
> > + vb2_buffer_done(&buf->vb.vb2_buf, state);
> > + list_del(&buf->list);
> > + }
> > + spin_unlock_irqrestore(&cru->qlock, flags);
> > +}
> > +
> > +static int rzg2l_cru_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
> > + unsigned int *nplanes, unsigned int sizes[],
> > + struct device *alloc_devs[])
> > +{
> > + struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vq);
> > +
> > + /* Make sure the image size is large enough. */
> > + if (*nplanes)
> > + return sizes[0] < cru->format.sizeimage ? -EINVAL : 0;
> > +
> > + *nplanes = 1;
> > + sizes[0] = cru->format.sizeimage;
> > +
> > + return 0;
> > +};
> > +
> > +static int rzg2l_cru_buffer_prepare(struct vb2_buffer *vb)
> > +{
> > + struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vb->vb2_queue);
> > + unsigned long size = cru->format.sizeimage;
> > +
> > + if (vb2_plane_size(vb, 0) < size) {
> > + dev_err(cru->dev, "buffer too small (%lu < %lu)\n",
> > + vb2_plane_size(vb, 0), size);
> > + return -EINVAL;
> > + }
> > +
> > + vb2_set_plane_payload(vb, 0, size);
> > +
> > + return 0;
> > +}
> > +
> > +static void rzg2l_cru_buffer_queue(struct vb2_buffer *vb)
> > +{
> > + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> > + struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vb->vb2_queue);
> > + unsigned long flags;
> > +
> > + spin_lock_irqsave(&cru->qlock, flags);
> > +
> > + list_add_tail(to_buf_list(vbuf), &cru->buf_list);
> > +
> > + spin_unlock_irqrestore(&cru->qlock, flags);
> > +}
> > +
> > +static int rzg2l_cru_mc_validate_format(struct rzg2l_cru_dev *cru,
> > + struct v4l2_subdev *sd,
> > + struct media_pad *pad)
>
> Isn't this better realized by installing a custom
> media_entity_operations.link_validate() operation in the vdev.entity ?
>
> There you can call v4l2_subdev_link_validate_default() to make sure
> the sizes and format on pads on each side of the link match and then
> perform additiona validations like the one you have here below ?
>
> The core will call it for you at media_pipeline_start() time.
> I think it should work for vdev.entities as well as for subdev
> entities ?
>
> I'll review the rest after I understood the CSI-2 part better.
>
> Thanks
> j
>
>
> > +{
> > + struct v4l2_subdev_format fmt = {
> > + .which = V4L2_SUBDEV_FORMAT_ACTIVE,
> > + };
> > +
> > + fmt.pad = pad->index;
> > + fmt.stream = 0;
> > + if (v4l2_subdev_call(sd, pad, get_fmt, v4l2_subdev_get_active_state(sd), &fmt))
> > + return -EPIPE;
> > +
> > + if (cru->is_csi) {
> > + switch (fmt.format.code) {
> > + case MEDIA_BUS_FMT_UYVY8_2X8:
> > + break;
> > + default:
> > + return -EPIPE;
> > + }
> > + }
> > + cru->mbus_code = fmt.format.code;
> > +
> > + switch (fmt.format.field) {
> > + case V4L2_FIELD_TOP:
> > + case V4L2_FIELD_BOTTOM:
> > + case V4L2_FIELD_NONE:
> > + case V4L2_FIELD_INTERLACED_TB:
> > + case V4L2_FIELD_INTERLACED_BT:
> > + case V4L2_FIELD_INTERLACED:
> > + case V4L2_FIELD_SEQ_TB:
> > + case V4L2_FIELD_SEQ_BT:
> > + break;
> > + default:
> > + return -EPIPE;
> > + }
> > +
> > + if (fmt.format.width != cru->format.width ||
> > + fmt.format.height != cru->format.height ||
> > + fmt.format.code != cru->mbus_code)
> > + return -EPIPE;
> > +
> > + return 0;
> > +}
> > +
> > +static void rzg2l_cru_set_slot_addr(struct rzg2l_cru_dev *cru,
> > + int slot, dma_addr_t addr)
> > +{
> > + const struct v4l2_format_info *fmt;
> > + int offsetx, offsety;
> > + dma_addr_t offset;
> > +
> > + fmt = rzg2l_cru_format_from_pixel(cru->format.pixelformat);
> > +
> > + /*
> > + * There is no HW support for composition do the best we can
> > + * by modifying the buffer offset
> > + */
> > + offsetx = cru->compose.left * fmt->bpp[0];
> > + offsety = cru->compose.top * cru->format.bytesperline;
> > + offset = addr + offsetx + offsety;
> > +
> > + /*
> > + * The address needs to be 512 bytes aligned. Driver should never accept
> > + * settings that do not satisfy this in the first place...
> > + */
> > + if (WARN_ON((offsetx | offsety | offset) & HW_BUFFER_MASK))
> > + return;
> > +
> > + /* Currently, we just use the buffer in 32 bits address */
> > + rzg2l_cru_write(cru, AMnMBxADDRL(slot), offset);
> > + rzg2l_cru_write(cru, AMnMBxADDRH(slot), 0);
> > +}
> > +
> > +/*
> > + * Moves a buffer from the queue to the HW slot. If no buffer is
> > + * available use the scratch buffer. The scratch buffer is never
> > + * returned to userspace, its only function is to enable the capture
> > + * loop to keep running.
> > + */
> > +static void rzg2l_cru_fill_hw_slot(struct rzg2l_cru_dev *cru, int slot)
> > +{
> > + struct vb2_v4l2_buffer *vbuf;
> > + struct rzg2l_cru_buffer *buf;
> > + dma_addr_t phys_addr;
> > +
> > + /* A already populated slot shall never be overwritten. */
> > + if (WARN_ON(cru->queue_buf[slot]))
> > + return;
> > +
> > + dev_dbg(cru->dev, "Filling HW slot: %d\n", slot);
> > +
> > + if (list_empty(&cru->buf_list)) {
> > + cru->queue_buf[slot] = NULL;
> > + phys_addr = cru->scratch_phys;
> > + } else {
> > + /* Keep track of buffer we give to HW */
> > + buf = list_entry(cru->buf_list.next,
> > + struct rzg2l_cru_buffer, list);
> > + vbuf = &buf->vb;
> > + list_del_init(to_buf_list(vbuf));
> > + cru->queue_buf[slot] = vbuf;
> > +
> > + /* Setup DMA */
> > + phys_addr = vb2_dma_contig_plane_dma_addr(&vbuf->vb2_buf, 0);
> > + }
> > +
> > + rzg2l_cru_set_slot_addr(cru, slot, phys_addr);
> > +}
> > +
> > +static void rzg2l_cru_initialize_axi(struct rzg2l_cru_dev *cru)
> > +{
> > + unsigned int slot;
> > +
> > + /*
> > + * Set image data memory banks.
> > + * Currently, we will use maximum address.
> > + */
> > + rzg2l_cru_write(cru, AMnMBVALID, AMnMBVALID_MBVALID(cru->num_buf - 1));
> > +
> > + for (slot = 0; slot < cru->num_buf; slot++)
> > + rzg2l_cru_fill_hw_slot(cru, slot);
> > +}
> > +
> > +static void rzg2l_cru_csi2_setup(struct rzg2l_cru_dev *cru)
> > +{
> > + u32 icnmc;
> > +
> > + switch (cru->mbus_code) {
> > + case MEDIA_BUS_FMT_UYVY8_2X8:
> > + icnmc = ICnMC_INF_YUV8_422;
> > + cru->input_is_yuv = true;
> > + break;
> > + default:
> > + cru->input_is_yuv = false;
> > + icnmc = ICnMC_INF_USER;
> > + break;
> > + }
> > +
> > + icnmc |= (rzg2l_cru_read(cru, ICnMC) & ~ICnMC_INF_MASK);
> > +
> > + /* Set virtual channel CSI2 */
> > + icnmc |= ICnMC_VCSEL(cru->csi.channel);
> > +
> > + rzg2l_cru_write(cru, ICnMC, icnmc);
> > +}
> > +
> > +static int rzg2l_cru_initialize_image_conv(struct rzg2l_cru_dev *cru)
> > +{
> > + u32 icndmr;
> > +
> > + if (cru->is_csi)
> > + rzg2l_cru_csi2_setup(cru);
> > +
> > + /* Output format */
> > + switch (cru->format.pixelformat) {
> > + case V4L2_PIX_FMT_UYVY:
> > + icndmr = ICnDMR_YCMODE_UYVY;
> > + cru->output_is_yuv = true;
> > + break;
> > + default:
> > + dev_err(cru->dev, "Invalid pixelformat (0x%x)\n",
> > + cru->format.pixelformat);
> > + return -EINVAL;
> > + }
> > +
> > + /* If input and output use same colorspace, do bypass mode */
> > + if (cru->output_is_yuv == cru->input_is_yuv)
> > + rzg2l_cru_write(cru, ICnMC,
> > + rzg2l_cru_read(cru, ICnMC) | ICnMC_CSCTHR);
> > + else
> > + rzg2l_cru_write(cru, ICnMC,
> > + rzg2l_cru_read(cru, ICnMC) & (~ICnMC_CSCTHR));
> > +
> > + /* Set output data format */
> > + rzg2l_cru_write(cru, ICnDMR, icndmr);
> > +
> > + return 0;
> > +}
> > +
> > +static int rzg2l_cru_set_stream(struct rzg2l_cru_dev *cru, int on)
> > +{
> > + struct media_pipeline *pipe;
> > + struct v4l2_subdev *sd;
> > + struct media_pad *pad;
> > + unsigned long flags;
> > + int ret;
> > +
> > + pad = media_entity_remote_pad(&cru->pad);
> > + if (!pad)
> > + return -EPIPE;
> > +
> > + sd = media_entity_to_v4l2_subdev(pad->entity);
> > +
> > + if (!on) {
> > + media_pipeline_stop(cru->vdev.entity.pads);
> > + return v4l2_subdev_call(sd, video, s_stream, 0);
> > + }
> > +
> > + ret = rzg2l_cru_mc_validate_format(cru, sd, pad);
> > + if (ret)
> > + return ret;
> > +
> > + spin_lock_irqsave(&cru->qlock, flags);
> > +
> > + /* Select a video input */
> > + if (cru->is_csi)
> > + rzg2l_cru_write(cru, CRUnCTRL, CRUnCTRL_VINSEL(0));
> > +
> > + /* Cancel the software reset for image processing block */
> > + rzg2l_cru_write(cru, CRUnRST, CRUnRST_VRESETN);
> > +
> > + /* Disable and clear the interrupt before using */
> > + rzg2l_cru_write(cru, CRUnIE, 0);
> > + rzg2l_cru_write(cru, CRUnINTS, 0x001f000f);
> > +
> > + /* Initialize the AXI master */
> > + rzg2l_cru_initialize_axi(cru);
> > +
> > + /* Initialize image convert */
> > + ret = rzg2l_cru_initialize_image_conv(cru);
> > + if (ret) {
> > + spin_unlock_irqrestore(&cru->qlock, flags);
> > + return ret;
> > + }
> > +
> > + /* Enable interrupt */
> > + rzg2l_cru_write(cru, CRUnIE, CRUnIE_EFE);
> > +
> > + /* Enable image processing reception */
> > + rzg2l_cru_write(cru, ICnEN, ICnEN_ICEN);
> > +
> > + spin_unlock_irqrestore(&cru->qlock, flags);
> > +
> > + pipe = sd->entity.pads->pipe ? sd->entity.pads->pipe : &cru->vdev.pipe;
> > + ret = media_pipeline_start(cru->vdev.entity.pads, pipe);
> > + if (ret)
> > + return ret;
> > +
> > + ret = v4l2_subdev_call(sd, video, s_stream, 1);
> > + if (ret == -ENOIOCTLCMD)
> > + ret = 0;
> > + if (ret)
> > + media_pipeline_stop(cru->vdev.entity.pads);
> > +
> > + return ret;
> > +}
> > +
> > +static void rzg2l_cru_stop_streaming(struct rzg2l_cru_dev *cru)
> > +{
> > + u32 amnfifopntr, amnfifopntr_w, amnfifopntr_r_y;
> > + unsigned int retries = 0;
> > + unsigned long flags;
> > + u32 icnms;
> > +
> > + cru->state = RZG2L_CRU_DMA_STOPPING;
> > +
> > + rzg2l_cru_set_stream(cru, 0);
> > +
> > + spin_lock_irqsave(&cru->qlock, flags);
> > +
> > + /* Enable IRQ to detect frame start reception */
> > + rzg2l_cru_write(cru, CRUnINTS,
> > + (~rzg2l_cru_read(cru, CRUnINTS)) | CRUnINTS_SFS);
> > + rzg2l_cru_write(cru, CRUnIE, CRUnIE_SFE);
> > +
> > + /* Wait for streaming to stop */
> > + while (retries++ < RZG2L_RETRIES) {
> > + spin_unlock_irqrestore(&cru->qlock, flags);
> > + msleep(RZG2L_TIMEOUT_MS);
> > + spin_lock_irqsave(&cru->qlock, flags);
> > + }
> > +
> > + icnms = rzg2l_cru_read(cru, ICnMS) & ICnMS_IA;
> > + if (icnms)
> > + dev_err(cru->dev, "Failed stop HW, something is seriously broken\n");
> > +
> > + cru->state = RZG2L_CRU_DMA_STOPPED;
> > +
> > + /* Stop the operation of image conversion */
> > + rzg2l_cru_write(cru, ICnEN, 0);
> > +
> > + /* Disable and clear the interrupt */
> > + rzg2l_cru_write(cru, CRUnIE, 0);
> > + rzg2l_cru_write(cru, CRUnINTS, 0x001F0F0F);
> > +
> > + /* Wait until the FIFO becomes empty */
> > + for (retries = 5; retries > 0; retries--) {
> > + amnfifopntr = rzg2l_cru_read(cru, AMnFIFOPNTR);
> > +
> > + amnfifopntr_w = amnfifopntr & AMnFIFOPNTR_FIFOWPNTR;
> > + amnfifopntr_r_y =
> > + (amnfifopntr & AMnFIFOPNTR_FIFORPNTR_Y) >> 16;
> > + if (amnfifopntr_w == amnfifopntr_r_y)
> > + break;
> > +
> > + usleep_range(10, 20);
> > + }
> > +
> > + /* Notify that FIFO is not empty here */
> > + if (!retries)
> > + dev_err(cru->dev, "Failed to empty FIFO\n");
> > +
> > + /* Stop AXI bus */
> > + rzg2l_cru_write(cru, AMnAXISTP, AMnAXISTP_AXI_STOP);
> > +
> > + /* Wait until the AXI bus stop */
> > + for (retries = 5; retries > 0; retries--) {
> > + if (rzg2l_cru_read(cru, AMnAXISTPACK) &
> > + AMnAXISTPACK_AXI_STOP_ACK)
> > + break;
> > +
> > + usleep_range(10, 20);
> > + };
> > +
> > + /* Notify that AXI bus can not stop here */
> > + if (!retries)
> > + dev_err(cru->dev, "Failed to stop AXI bus\n");
> > +
> > + /* Cancel the AXI bus stop request */
> > + rzg2l_cru_write(cru, AMnAXISTP, 0);
> > +
> > + /* Resets the image processing module */
> > + rzg2l_cru_write(cru, CRUnRST, 0);
> > +
> > + spin_unlock_irqrestore(&cru->qlock, flags);
> > +
> > + /* Set reset state */
> > + reset_control_assert(cru->aresetn);
> > +}
> > +
> > +static int rzg2l_cru_start_streaming_vq(struct vb2_queue *vq, unsigned int count)
> > +{
> > + struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vq);
> > + int ret;
> > +
> > + /* Release reset state */
> > + ret = reset_control_deassert(cru->aresetn);
> > + if (ret) {
> > + dev_err(cru->dev, "failed to deassert aresetn\n");
> > + return ret;
> > + }
> > +
> > + /* Allocate scratch buffer. */
> > + cru->scratch = dma_alloc_coherent(cru->dev, cru->format.sizeimage,
> > + &cru->scratch_phys, GFP_KERNEL);
> > + if (!cru->scratch) {
> > + return_unused_buffers(cru, VB2_BUF_STATE_QUEUED);
> > + dev_err(cru->dev, "Failed to allocate scratch buffer\n");
> > + return -ENOMEM;
> > + }
> > +
> > + cru->sequence = 0;
> > +
> > + ret = rzg2l_cru_set_stream(cru, 1);
> > + if (ret) {
> > + return_unused_buffers(cru, VB2_BUF_STATE_QUEUED);
> > + goto out;
> > + }
> > +
> > + cru->state = RZG2L_CRU_DMA_STARTING;
> > +
> > + dev_dbg(cru->dev, "Starting to capture\n");
> > +
> > +out:
> > + if (ret)
> > + dma_free_coherent(cru->dev, cru->format.sizeimage, cru->scratch,
> > + cru->scratch_phys);
> > +
> > + return ret;
> > +}
> > +
> > +static void rzg2l_cru_stop_streaming_vq(struct vb2_queue *vq)
> > +{
> > + struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vq);
> > +
> > + rzg2l_cru_stop_streaming(cru);
> > +
> > + /* Free scratch buffer */
> > + dma_free_coherent(cru->dev, cru->format.sizeimage, cru->scratch,
> > + cru->scratch_phys);
> > +
> > + return_unused_buffers(cru, VB2_BUF_STATE_ERROR);
> > +}
> > +
> > +static const struct vb2_ops rzg2l_cru_qops = {
> > + .queue_setup = rzg2l_cru_queue_setup,
> > + .buf_prepare = rzg2l_cru_buffer_prepare,
> > + .buf_queue = rzg2l_cru_buffer_queue,
> > + .start_streaming = rzg2l_cru_start_streaming_vq,
> > + .stop_streaming = rzg2l_cru_stop_streaming_vq,
> > + .wait_prepare = vb2_ops_wait_prepare,
> > + .wait_finish = vb2_ops_wait_finish,
> > +};
> > +
> > +static irqreturn_t rzg2l_cru_irq(int irq, void *data)
> > +{
> > + struct rzg2l_cru_dev *cru = data;
> > + unsigned int handled = 0;
> > + unsigned long flags;
> > + u32 irq_status;
> > + u32 amnmbs;
> > + int slot;
> > +
> > + spin_lock_irqsave(&cru->qlock, flags);
> > +
> > + irq_status = rzg2l_cru_read(cru, CRUnINTS);
> > + if (!irq_status)
> > + goto done;
> > +
> > + handled = 1;
> > +
> > + rzg2l_cru_write(cru, CRUnINTS, rzg2l_cru_read(cru, CRUnINTS));
> > +
> > + /* Nothing to do if capture status is 'RZG2L_CRU_DMA_STOPPED' */
> > + if (cru->state == RZG2L_CRU_DMA_STOPPED) {
> > + dev_dbg(cru->dev, "IRQ while state stopped\n");
> > + goto done;
> > + }
> > +
> > + /* Increase stop retries if capture status is 'RZG2L_CRU_DMA_STOPPING' */
> > + if (cru->state == RZG2L_CRU_DMA_STOPPING) {
> > + if (irq_status & CRUnINTS_SFS)
> > + dev_dbg(cru->dev, "IRQ while state stopping\n");
> > + goto done;
> > + }
> > +
> > + /* Prepare for capture and update state */
> > + amnmbs = rzg2l_cru_read(cru, AMnMBS);
> > + slot = amnmbs & AMnMBS_MBSTS;
> > +
> > + /*
> > + * AMnMBS.MBSTS indicates the destination of Memory Bank (MB).
> > + * Recalculate to get the current transfer complete MB.
> > + */
> > + if (slot == 0)
> > + slot = cru->num_buf - 1;
> > + else
> > + slot--;
> > +
> > + /*
> > + * To hand buffers back in a known order to userspace start
> > + * to capture first from slot 0.
> > + */
> > + if (cru->state == RZG2L_CRU_DMA_STARTING) {
> > + if (slot != 0) {
> > + dev_dbg(cru->dev, "Starting sync slot: %d\n", slot);
> > + goto done;
> > + }
> > +
> > + dev_dbg(cru->dev, "Capture start synced!\n");
> > + cru->state = RZG2L_CRU_DMA_RUNNING;
> > + }
> > +
> > + /* Capture frame */
> > + if (cru->queue_buf[slot]) {
> > + cru->queue_buf[slot]->field = cru->format.field;
> > + cru->queue_buf[slot]->sequence = cru->sequence;
> > + cru->queue_buf[slot]->vb2_buf.timestamp = ktime_get_ns();
> > + vb2_buffer_done(&cru->queue_buf[slot]->vb2_buf,
> > + VB2_BUF_STATE_DONE);
> > + cru->queue_buf[slot] = NULL;
> > + } else {
> > + /* Scratch buffer was used, dropping frame. */
> > + dev_dbg(cru->dev, "Dropping frame %u\n", cru->sequence);
> > + }
> > +
> > + cru->sequence++;
> > +
> > + /* Prepare for next frame */
> > + rzg2l_cru_fill_hw_slot(cru, slot);
> > +
> > +done:
> > + spin_unlock_irqrestore(&cru->qlock, flags);
> > +
> > + return IRQ_RETVAL(handled);
> > +}
> > +
> > +void rzg2l_cru_dma_unregister(struct rzg2l_cru_dev *cru)
> > +{
> > + mutex_destroy(&cru->lock);
> > +
> > + v4l2_device_unregister(&cru->v4l2_dev);
> > + reset_control_assert(cru->presetn);
> > +}
> > +
> > +int rzg2l_cru_dma_register(struct rzg2l_cru_dev *cru, int irq)
> > +{
> > + struct vb2_queue *q = &cru->queue;
> > + unsigned int i;
> > + int ret;
> > +
> > + ret = reset_control_deassert(cru->presetn);
> > + if (ret) {
> > + dev_err(cru->dev, "failed to deassert presetn\n");
> > + return ret;
> > + }
> > +
> > + /* Initialize the top-level structure */
> > + ret = v4l2_device_register(cru->dev, &cru->v4l2_dev);
> > + if (ret)
> > + return ret;
> > +
> > + mutex_init(&cru->lock);
> > + INIT_LIST_HEAD(&cru->buf_list);
> > +
> > + spin_lock_init(&cru->qlock);
> > +
> > + cru->state = RZG2L_CRU_DMA_STOPPED;
> > +
> > + for (i = 0; i < HW_BUFFER_MAX; i++)
> > + cru->queue_buf[i] = NULL;
> > +
> > + /* buffer queue */
> > + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> > + q->io_modes = VB2_MMAP | VB2_READ | VB2_DMABUF;
> > + q->lock = &cru->lock;
> > + q->drv_priv = cru;
> > + q->buf_struct_size = sizeof(struct rzg2l_cru_buffer);
> > + q->ops = &rzg2l_cru_qops;
> > + q->mem_ops = &vb2_dma_contig_memops;
> > + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
> > + q->min_buffers_needed = 4;
> > + q->dev = cru->dev;
> > +
> > + ret = vb2_queue_init(q);
> > + if (ret < 0) {
> > + dev_err(cru->dev, "failed to initialize VB2 queue\n");
> > + goto error;
> > + }
> > +
> > + /* IRQ */
> > + ret = devm_request_irq(cru->dev, irq, rzg2l_cru_irq, IRQF_SHARED,
> > + KBUILD_MODNAME, cru);
> > + if (ret) {
> > + dev_err(cru->dev, "failed to request irq\n");
> > + goto error;
> > + }
> > +
> > + return 0;
> > +
> > +error:
> > + rzg2l_cru_dma_unregister(cru);
> > + return ret;
> > +}
> > diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c
> > new file mode 100644
> > index 000000000000..b1b1bfda7eb1
> > --- /dev/null
> > +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c
> > @@ -0,0 +1,360 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Driver for Renesas RZ/G2L CRU
> > + *
> > + * Copyright (C) 2022 Renesas Electronics Corp.
> > + *
> > + * Based on Renesas R-Car VIN
> > + * Copyright (C) 2016 Renesas Electronics Corp.
> > + * Copyright (C) 2011-2013 Renesas Solutions Corp.
> > + * Copyright (C) 2013 Cogent Embedded, Inc., <source@cogentembedded.com>
> > + * Copyright (C) 2008 Magnus Damm
> > + */
> > +
> > +#include <linux/pm_runtime.h>
> > +
> > +#include <media/v4l2-event.h>
> > +#include <media/v4l2-ioctl.h>
> > +#include <media/v4l2-mc.h>
> > +#include <media/v4l2-rect.h>
> > +
> > +#include "rzg2l-cru.h"
> > +
> > +#define RZG2L_CRU_DEFAULT_FORMAT V4L2_PIX_FMT_UYVY
> > +#define RZG2L_CRU_DEFAULT_WIDTH 800
> > +#define RZG2L_CRU_DEFAULT_HEIGHT 600
> > +#define RZG2L_CRU_DEFAULT_FIELD V4L2_FIELD_NONE
> > +#define RZG2L_CRU_DEFAULT_COLORSPACE V4L2_COLORSPACE_SRGB
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Format Conversions
> > + */
> > +
> > +static const struct v4l2_format_info rzg2l_cru_formats[] = {
> > + {
> > + .format = V4L2_PIX_FMT_UYVY,
> > + .bpp[0] = 2,
> > + },
> > +};
> > +
> > +const struct v4l2_format_info *rzg2l_cru_format_from_pixel(u32 format)
> > +{
> > + unsigned int i;
> > +
> > + for (i = 0; i < ARRAY_SIZE(rzg2l_cru_formats); i++)
> > + if (rzg2l_cru_formats[i].format == format)
> > + return rzg2l_cru_formats + i;
> > +
> > + return NULL;
> > +}
> > +
> > +static u32 rzg2l_cru_format_bytesperline(struct v4l2_pix_format *pix)
> > +{
> > + const struct v4l2_format_info *fmt;
> > +
> > + fmt = rzg2l_cru_format_from_pixel(pix->pixelformat);
> > +
> > + if (WARN_ON(!fmt))
> > + return -EINVAL;
> > +
> > + return pix->width * fmt->bpp[0];
> > +}
> > +
> > +static u32 rzg2l_cru_format_sizeimage(struct v4l2_pix_format *pix)
> > +{
> > + return pix->bytesperline * pix->height;
> > +}
> > +
> > +static void rzg2l_cru_format_align(struct rzg2l_cru_dev *cru,
> > + struct v4l2_pix_format *pix)
> > +{
> > + if (!rzg2l_cru_format_from_pixel(pix->pixelformat))
> > + pix->pixelformat = RZG2L_CRU_DEFAULT_FORMAT;
> > +
> > + switch (pix->field) {
> > + case V4L2_FIELD_TOP:
> > + case V4L2_FIELD_BOTTOM:
> > + case V4L2_FIELD_NONE:
> > + case V4L2_FIELD_INTERLACED_TB:
> > + case V4L2_FIELD_INTERLACED_BT:
> > + case V4L2_FIELD_INTERLACED:
> > + break;
> > + default:
> > + pix->field = RZG2L_CRU_DEFAULT_FIELD;
> > + break;
> > + }
> > +
> > + /* Limit to CRU capabilities */
> > + v4l_bound_align_image(&pix->width, 320, cru->info->max_width, 1,
> > + &pix->height, 240, cru->info->max_height, 2, 0);
> > +
> > + pix->bytesperline = rzg2l_cru_format_bytesperline(pix);
> > + pix->sizeimage = rzg2l_cru_format_sizeimage(pix);
> > +
> > + dev_dbg(cru->dev, "Format %ux%u bpl: %u size: %u\n",
> > + pix->width, pix->height, pix->bytesperline, pix->sizeimage);
> > +}
> > +
> > +static void rzg2l_cru_try_format(struct rzg2l_cru_dev *cru,
> > + struct v4l2_pix_format *pix)
> > +{
> > + /*
> > + * The V4L2 specification clearly documents the colorspace fields
> > + * as being set by drivers for capture devices. Using the values
> > + * supplied by userspace thus wouldn't comply with the API. Until
> > + * the API is updated force fixed values.
> > + */
> > + pix->colorspace = RZG2L_CRU_DEFAULT_COLORSPACE;
> > + pix->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix->colorspace);
> > + pix->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(pix->colorspace);
> > + pix->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true, pix->colorspace,
> > + pix->ycbcr_enc);
> > +
> > + rzg2l_cru_format_align(cru, pix);
> > +}
> > +
> > +static int rzg2l_cru_querycap(struct file *file, void *priv,
> > + struct v4l2_capability *cap)
> > +{
> > + struct rzg2l_cru_dev *cru = video_drvdata(file);
> > +
> > + strscpy(cap->driver, KBUILD_MODNAME, sizeof(cap->driver));
> > + strscpy(cap->card, "RZG2L_CRU", sizeof(cap->card));
> > + snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
> > + dev_name(cru->dev));
> > + return 0;
> > +}
> > +
> > +static int rzg2l_cru_try_fmt_vid_cap(struct file *file, void *priv,
> > + struct v4l2_format *f)
> > +{
> > + struct rzg2l_cru_dev *cru = video_drvdata(file);
> > +
> > + rzg2l_cru_try_format(cru, &f->fmt.pix);
> > +
> > + return 0;
> > +}
> > +
> > +static int rzg2l_cru_s_fmt_vid_cap(struct file *file, void *priv,
> > + struct v4l2_format *f)
> > +{
> > + struct rzg2l_cru_dev *cru = video_drvdata(file);
> > +
> > + if (vb2_is_busy(&cru->queue))
> > + return -EBUSY;
> > +
> > + rzg2l_cru_try_format(cru, &f->fmt.pix);
> > +
> > + cru->format = f->fmt.pix;
> > +
> > + cru->compose.top = 0;
> > + cru->compose.left = 0;
> > + cru->compose.width = cru->format.width;
> > + cru->compose.height = cru->format.height;
> > +
> > + return 0;
> > +}
> > +
> > +static int rzg2l_cru_g_fmt_vid_cap(struct file *file, void *priv,
> > + struct v4l2_format *f)
> > +{
> > + struct rzg2l_cru_dev *cru = video_drvdata(file);
> > +
> > + f->fmt.pix = cru->format;
> > +
> > + return 0;
> > +}
> > +
> > +static int rzg2l_cru_enum_fmt_vid_cap(struct file *file, void *priv,
> > + struct v4l2_fmtdesc *f)
> > +{
> > + if (f->index >= ARRAY_SIZE(rzg2l_cru_formats))
> > + return -EINVAL;
> > +
> > + f->pixelformat = rzg2l_cru_formats[f->index].format;
> > +
> > + return 0;
> > +}
> > +
> > +static int rzg2l_cru_subscribe_event(struct v4l2_fh *fh,
> > + const struct v4l2_event_subscription *sub)
> > +{
> > + switch (sub->type) {
> > + case V4L2_EVENT_SOURCE_CHANGE:
> > + return v4l2_event_subscribe(fh, sub, 4, NULL);
> > + }
> > + return v4l2_ctrl_subscribe_event(fh, sub);
> > +}
> > +
> > +static const struct v4l2_ioctl_ops rzg2l_cru_ioctl_ops = {
> > + .vidioc_querycap = rzg2l_cru_querycap,
> > + .vidioc_try_fmt_vid_cap = rzg2l_cru_try_fmt_vid_cap,
> > + .vidioc_g_fmt_vid_cap = rzg2l_cru_g_fmt_vid_cap,
> > + .vidioc_s_fmt_vid_cap = rzg2l_cru_s_fmt_vid_cap,
> > + .vidioc_enum_fmt_vid_cap = rzg2l_cru_enum_fmt_vid_cap,
> > +
> > + .vidioc_reqbufs = vb2_ioctl_reqbufs,
> > + .vidioc_create_bufs = vb2_ioctl_create_bufs,
> > + .vidioc_querybuf = vb2_ioctl_querybuf,
> > + .vidioc_qbuf = vb2_ioctl_qbuf,
> > + .vidioc_dqbuf = vb2_ioctl_dqbuf,
> > + .vidioc_expbuf = vb2_ioctl_expbuf,
> > + .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
> > + .vidioc_streamon = vb2_ioctl_streamon,
> > + .vidioc_streamoff = vb2_ioctl_streamoff,
> > +
> > + .vidioc_log_status = v4l2_ctrl_log_status,
> > + .vidioc_subscribe_event = rzg2l_cru_subscribe_event,
> > + .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
> > +};
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Media controller file operations
> > + */
> > +
> > +static int rzg2l_cru_open(struct file *file)
> > +{
> > + struct rzg2l_cru_dev *cru = video_drvdata(file);
> > + int ret;
> > +
> > + ret = pm_runtime_resume_and_get(cru->dev);
> > + if (ret < 0)
> > + return ret;
> > +
> > + ret = mutex_lock_interruptible(&cru->lock);
> > + if (ret)
> > + goto err_pm;
> > +
> > + file->private_data = cru;
> > + ret = v4l2_fh_open(file);
> > + if (ret)
> > + goto err_unlock;
> > +
> > + ret = v4l2_pipeline_pm_get(&cru->vdev.entity);
> > + if (ret < 0)
> > + goto err_open;
> > +
> > + ret = v4l2_ctrl_handler_setup(&cru->ctrl_handler);
> > + if (ret)
> > + goto err_power;
> > +
> > + mutex_unlock(&cru->lock);
> > +
> > + return 0;
> > +err_power:
> > + v4l2_pipeline_pm_put(&cru->vdev.entity);
> > +err_open:
> > + v4l2_fh_release(file);
> > +err_unlock:
> > + mutex_unlock(&cru->lock);
> > +err_pm:
> > + pm_runtime_put(cru->dev);
> > +
> > + return ret;
> > +}
> > +
> > +static int rzg2l_cru_release(struct file *file)
> > +{
> > + struct rzg2l_cru_dev *cru = video_drvdata(file);
> > + int ret;
> > +
> > + mutex_lock(&cru->lock);
> > +
> > + /* the release helper will cleanup any on-going streaming. */
> > + ret = _vb2_fop_release(file, NULL);
> > +
> > + v4l2_pipeline_pm_put(&cru->vdev.entity);
> > + pm_runtime_put(cru->dev);
> > +
> > + mutex_unlock(&cru->lock);
> > +
> > + return ret;
> > +}
> > +
> > +static const struct v4l2_file_operations rzg2l_cru_fops = {
> > + .owner = THIS_MODULE,
> > + .unlocked_ioctl = video_ioctl2,
> > + .open = rzg2l_cru_open,
> > + .release = rzg2l_cru_release,
> > + .poll = vb2_fop_poll,
> > + .mmap = vb2_fop_mmap,
> > + .read = vb2_fop_read,
> > +};
> > +
> > +void rzg2l_cru_v4l2_unregister(struct rzg2l_cru_dev *cru)
> > +{
> > + if (!video_is_registered(&cru->vdev))
> > + return;
> > +
> > + v4l2_info(&cru->v4l2_dev, "Removed %s\n",
> > + video_device_node_name(&cru->vdev));
> > +
> > + /* Checks internally if vdev have been init or not */
> > + video_unregister_device(&cru->vdev);
> > +}
> > +
> > +static void rzg2l_cru_notify(struct v4l2_subdev *sd,
> > + unsigned int notification, void *arg)
> > +{
> > + struct rzg2l_cru_dev *cru =
> > + container_of(sd->v4l2_dev, struct rzg2l_cru_dev, v4l2_dev);
> > + struct v4l2_subdev *remote;
> > + struct media_pad *pad;
> > +
> > + pad = media_entity_remote_pad(&cru->pad);
> > + if (!pad)
> > + return;
> > +
> > + remote = media_entity_to_v4l2_subdev(pad->entity);
> > + if (remote != sd)
> > + return;
> > +
> > + switch (notification) {
> > + case V4L2_DEVICE_NOTIFY_EVENT:
> > + v4l2_event_queue(&cru->vdev, arg);
> > + break;
> > + }
> > +}
> > +
> > +int rzg2l_cru_v4l2_register(struct rzg2l_cru_dev *cru)
> > +{
> > + struct video_device *vdev = &cru->vdev;
> > + int ret;
> > +
> > + cru->v4l2_dev.notify = rzg2l_cru_notify;
> > +
> > + /* video node */
> > + vdev->v4l2_dev = &cru->v4l2_dev;
> > + vdev->queue = &cru->queue;
> > + snprintf(vdev->name, sizeof(vdev->name), "CRU output");
> > + vdev->release = video_device_release_empty;
> > + vdev->lock = &cru->lock;
> > + vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
> > + V4L2_CAP_READWRITE;
> > +
> > + /* Set a default format */
> > + cru->format.pixelformat = RZG2L_CRU_DEFAULT_FORMAT;
> > + cru->format.width = RZG2L_CRU_DEFAULT_WIDTH;
> > + cru->format.height = RZG2L_CRU_DEFAULT_HEIGHT;
> > + cru->format.field = RZG2L_CRU_DEFAULT_FIELD;
> > + cru->format.colorspace = RZG2L_CRU_DEFAULT_COLORSPACE;
> > +
> > + vdev->device_caps |= V4L2_CAP_IO_MC;
> > + vdev->fops = &rzg2l_cru_fops;
> > + vdev->ioctl_ops = &rzg2l_cru_ioctl_ops;
> > +
> > + rzg2l_cru_format_align(cru, &cru->format);
> > +
> > + ret = video_register_device(&cru->vdev, VFL_TYPE_VIDEO, -1);
> > + if (ret) {
> > + dev_err(cru->dev, "Failed to register video device\n");
> > + return ret;
> > + }
> > +
> > + video_set_drvdata(&cru->vdev, cru);
> > +
> > + v4l2_info(&cru->v4l2_dev, "Device registered as %s\n",
> > + video_device_node_name(&cru->vdev));
> > +
> > + return ret;
> > +}
> > --
> > 2.17.1
> >
--
Kind Regards,
Niklas Söderlund
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [RFC PATCH v2 1/4] media: dt-bindings: media: Document RZ/G2L CSI-2 block
2022-02-15 13:01 ` Jacopo Mondi
@ 2022-03-18 16:58 ` Lad, Prabhakar
0 siblings, 0 replies; 17+ messages in thread
From: Lad, Prabhakar @ 2022-03-18 16:58 UTC (permalink / raw)
To: Jacopo Mondi
Cc: Lad Prabhakar, Niklas Söderlund, Philipp Zabel,
Mauro Carvalho Chehab, Rob Herring, Laurent Pinchart,
Sakari Ailus, Hans Verkuil, Geert Uytterhoeven, linux-media,
Linux-Renesas,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, LKML,
Biju Das
Hi Jacopo,
Thank you for the review.
On Tue, Feb 15, 2022 at 1:00 PM Jacopo Mondi <jacopo@jmondi.org> wrote:
>
> Hi Prabhakar
>
> On Fri, Jan 21, 2022 at 01:05:40AM +0000, Lad Prabhakar wrote:
> > Document the CSI-2 block which is part of CRU found in Renesas
> > RZ/G2L SoC.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > Hi Geert/All,
> >
> > vclk and pclk clocks are shared with CRU both CSI and CRU driver are using
> > pm_runtime. pclk clock is necessary for register access where as vclk clock
> > is only used for calculations. So would you suggest passing vclk as part of
> > clocks (as currently implemented) or pass the vclk clock rate as a dt property.
> >
> > Cheers,
> > Prabhakar
> >
> > v1->v2
> > * New patch
> > ---
> > .../bindings/media/renesas,rzg2l-csi2.yaml | 151 ++++++++++++++++++
> > 1 file changed, 151 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> > new file mode 100644
> > index 000000000000..bf907768a157
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> > @@ -0,0 +1,151 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +# Copyright (C) 2022 Renesas Electronics Corp.
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/renesas,rzg2l-csi2.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Renesas RZ/G2L MIPI CSI-2 receiver
> > +
> > +maintainers:
> > + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > +
> > +description:
> > + The RZ/G2L CSI-2 receiver device provides MIPI CSI-2 capabilities for the
> > + Renesas RZ/G2L family of devices. MIPI CSI-2 is part of the CRU block which
> > + is used in conjunction with the Image Processing module, which provides the
> > + video capture capabilities.
> > +
> > +properties:
> > + compatible:
> > + oneOf:
> > + - items:
> > + - enum:
> > + - renesas,r9a07g044-csi2 # RZ/G2{L,LC}
> > + - const: renesas,rzg2l-csi2
>
> As per Rob's comment on the CRU bindings, you can remove oneOf:
>
I would like to keep it, as there will be RZ/V2L and RZ/G2UL entries
following as soon once as this gets merged in. So just want to avoid
the change hunk later.
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + interrupt-names:
> > + items:
> > + - const: csi2_link
>
> Can this be just
>
> interrupt-names:
> const: csi2_link
> ?
>
Agreed.
> (I've run dt_binding_check and it does not complain)
>
> > +
> > + clocks:
> > + items:
> > + - description: Internal clock for connecting CRU and MIPI
> > + - description: CRU Main clock
> > + - description: CPU Register access clock
> > +
> > + clock-names:
> > + items:
> > + - const: sysclk
> > + - const: vclk
> > + - const: pclk
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > + resets:
> > + items:
> > + - description: CRU_CMN_RSTB reset terminal
> > +
> > + reset-names:
> > + items:
> > + - const: cmn-rstb
>
> Here and above, is items: needed for a single entry ?
> (again, dt_binding_check does not complain if I remove it)
>
Agreed.
> > +
> > + ports:
> > + $ref: /schemas/graph.yaml#/properties/ports
> > +
> > + properties:
> > + port@0:
> > + $ref: /schemas/graph.yaml#/$defs/port-base
> > + unevaluatedProperties: false
> > + description:
> > + Input port node, single endpoint describing the CSI-2 transmitter.
> > +
> > + properties:
> > + endpoint:
> > + $ref: video-interfaces.yaml#
> > + unevaluatedProperties: false
> > +
> > + properties:
> > + data-lanes:
> > + minItems: 1
> > + maxItems: 4
> > + items:
> > + maximum: 4
> > +
> > + required:
> > + - clock-lanes
> > + - data-lanes
> > +
> > + port@1:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description:
> > + Output port node, Image Processing block connected to the CSI-2 receiver.
>
> Isn't the next processing block the CRU ? IOW, isn't this driver the
> CSI-2 receiver ?
>
On RZ/G2L CRU consists of CSI + image processing block (as seen in
[0]). As requested by Laurent in previous version I split up the
driver for CSI. So instead of mentioning CRU I have mentioned it as
"Image Processing block".
[0] https://renesas.info/wiki/File:CRU.png
Cheers,
Prabhakar
> > +
> > + required:
> > + - port@0
> > + - port@1
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - clocks
> > + - clock-names
> > + - power-domains
> > + - resets
> > + - reset-names
> > + - ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/r9a07g044-cpg.h>
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > + csi20: csi2@10830400 {
> > + compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2";
> > + reg = <0x10830400 0xfc00>;
> > + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>,
> > + <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
> > + <&cpg CPG_MOD R9A07G044_CRU_PCLK>;
> > + clock-names = "sysclk", "vclk", "pclk";
> > + power-domains = <&cpg>;
> > + resets = <&cpg R9A07G044_CRU_CMN_RSTB>;
> > + reset-names = "cmn-rstb";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > +
> > + csi2_in: endpoint {
> > + clock-lanes = <0>;
> > + data-lanes = <1 2>;
> > + remote-endpoint = <&ov5645_ep>;
> > + };
> > + };
> > +
> > + port@1 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + reg = <1>;
> > +
> > + csi2cru: endpoint@0 {
> > + reg = <0>;
> > + remote-endpoint = <&crucsi2>;
> > + };
> > + };
> > + };
> > + };
> > --
> > 2.17.1
> >
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [RFC PATCH v2 2/4] media: dt-bindings: media: Document RZ/G2L CRU
2022-02-07 22:39 ` Rob Herring
@ 2022-03-18 20:39 ` Lad, Prabhakar
0 siblings, 0 replies; 17+ messages in thread
From: Lad, Prabhakar @ 2022-03-18 20:39 UTC (permalink / raw)
To: Rob Herring
Cc: Lad Prabhakar, Niklas Söderlund, Jacopo Mondi,
Philipp Zabel, Mauro Carvalho Chehab, Laurent Pinchart,
Sakari Ailus, Hans Verkuil, Geert Uytterhoeven, linux-media,
Linux-Renesas,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, LKML,
Biju Das
Hi Rob,
Thank you for the review.
On Mon, Feb 7, 2022 at 10:39 PM Rob Herring <robh@kernel.org> wrote:
>
> On Fri, Jan 21, 2022 at 01:05:41AM +0000, Lad Prabhakar wrote:
> > Document the CRU block found on Renesas RZ/G2L SoC's.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > v1->v2
> > * Dropped CSI
> > ---
> > .../bindings/media/renesas,rzg2l-cru.yaml | 152 ++++++++++++++++++
> > 1 file changed, 152 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> > new file mode 100644
> > index 000000000000..a03fc6ef0117
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> > @@ -0,0 +1,152 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +# Copyright (C) 2022 Renesas Electronics Corp.
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Renesas RZ/G2L Camera Data Receiving Unit (CRU)
> > +
> > +maintainers:
> > + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > +
> > +description:
> > + The RZ/G2L Camera Data Receiving Unit (CRU) device provides video input
> > + capabilities for the Renesas RZ/G2L family of devices.
> > +
> > + Depending on the instance the Image Processing input is connected to
> > + external SoC pins or to a CSI-2 receiver.
> > +
> > +properties:
> > + compatible:
> > + oneOf:
> > + - items:
>
> Don't need oneOf when there is only 1 entry.
>
There are two more SoC's to be added as soon this patch series get
merged, so to keep the changes minimal later I will keep oneOf here.
> > + - enum:
> > + - renesas,r9a07g044-cru # RZ/G2{L,LC}
> > + - const: renesas,rzg2l-cru
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 3
> > +
> > + interrupt-names:
> > + items:
> > + - const: image_conv
> > + - const: image_conv_err
> > + - const: axi_mst_err
> > +
> > + clocks:
> > + items:
> > + - description: CRU Main clock
> > + - description: CPU Register access clock
> > + - description: CRU image transfer clock
> > +
> > + clock-names:
> > + items:
> > + - const: vclk
> > + - const: pclk
> > + - const: aclk
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > + resets:
> > + items:
> > + - description: CRU_PRESETN reset terminal
> > + - description: CRU_ARESETN reset terminal
> > +
> > + reset-names:
> > + items:
> > + - const: presetn
> > + - const: aresetn
> > +
> > + ports:
> > + $ref: /schemas/graph.yaml#/properties/ports
> > +
> > + properties:
> > + port@0:
> > + $ref: /schemas/graph.yaml#/$defs/port-base
> > + unevaluatedProperties: false
> > + description:
> > + Input port node, single endpoint describing a parallel input source.
> > +
> > + properties:
> > + endpoint:
> > + $ref: video-interfaces.yaml#
> > + unevaluatedProperties: false
> > +
> > + properties:
> > + hsync-active: true
> > + vsync-active: true
> > + bus-width: true
> > + data-shift: true
> > +
> > + port@1:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description:
> > + Output port node, describing the RZ/G2L Image Processing module
> > + connected the CSI-2 receiver
>
> > +
> > + properties:
> > + endpoint@0:
> > + $ref: /schemas/graph.yaml#/properties/endpoint
> > + description: Endpoint connected to CSI2.
> > +
> > + anyOf:
> > + - required:
> > + - endpoint@0
>
> You can drop all the endpoint stuff. Just 'endpoint' should be valid as
> well for example. The graph schema covers all that.
>
Will do.
Cheers,
Prabhakar
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - interrupt-names
> > + - clocks
> > + - clock-names
> > + - resets
> > + - reset-names
> > + - power-domains
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + # Device node example with CSI-2
> > + - |
> > + #include <dt-bindings/clock/r9a07g044-cpg.h>
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > + cru: video@10830000 {
> > + compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";
> > + reg = <0x10830000 0x400>;
> > + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
> > + clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
> > + <&cpg CPG_MOD R9A07G044_CRU_PCLK>,
> > + <&cpg CPG_MOD R9A07G044_CRU_ACLK>;
> > + clock-names = "vclk", "pclk", "aclk";
> > + power-domains = <&cpg>;
> > + resets = <&cpg R9A07G044_CRU_PRESETN>,
> > + <&cpg R9A07G044_CRU_ARESETN>;
> > + reset-names = "presetn", "aresetn";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@1 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + reg = <1>;
> > +
> > + crucsi2: endpoint@0 {
> > + reg = <0>;
> > + remote-endpoint= <&csi2cru>;
> > + };
> > + };
> > + };
> > + };
> > --
> > 2.17.1
> >
> >
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [RFC PATCH v2 3/4] media: platform: Add CRU driver for RZ/G2L SoC
2022-02-15 14:40 ` Jacopo Mondi
2022-02-15 15:45 ` Niklas Söderlund
@ 2022-03-22 0:08 ` Lad, Prabhakar
1 sibling, 0 replies; 17+ messages in thread
From: Lad, Prabhakar @ 2022-03-22 0:08 UTC (permalink / raw)
To: Jacopo Mondi
Cc: Lad Prabhakar, Niklas Söderlund, Philipp Zabel,
Mauro Carvalho Chehab, Rob Herring, Laurent Pinchart,
Sakari Ailus, Hans Verkuil, Geert Uytterhoeven, linux-media,
Linux-Renesas,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, LKML,
Biju Das
Hi Jacopo,
Thank you for the review. Sorry for the delayed response.
On Tue, Feb 15, 2022 at 2:39 PM Jacopo Mondi <jacopo@jmondi.org> wrote:
>
> Hello Prabhakar,
>
> On Fri, Jan 21, 2022 at 01:05:42AM +0000, Lad Prabhakar wrote:
> > Add v4l driver for Renesas RZ/G2L Camera data Receiving Unit.
> >
> > Based on a patch in the BSP by Hien Huynh
> > <hien.huynh.px@renesas.com>
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > v1->v2
> > * Dropped group
> > * Dropped CSI subdev and implemented as new driver
> > * Dropped "mc_" from function names
> > * Moved the driver to renesas folder
> > ---
> > drivers/media/platform/Kconfig | 1 +
> > drivers/media/platform/Makefile | 2 +
> > .../media/platform/renesas/rzg2l-cru/Kconfig | 15 +
> > .../media/platform/renesas/rzg2l-cru/Makefile | 4 +
> > .../platform/renesas/rzg2l-cru/rzg2l-core.c | 432 +++++++++++
> > .../platform/renesas/rzg2l-cru/rzg2l-cru.h | 155 ++++
> > .../platform/renesas/rzg2l-cru/rzg2l-dma.c | 722 ++++++++++++++++++
> > .../platform/renesas/rzg2l-cru/rzg2l-v4l2.c | 360 +++++++++
>
> Niklas, Laurent, this series introduces drivers/media/platform/renesas
>
> Should the several renesas driver be moved there ?
>
Mauro has done this for us now :)
> In that case I would suggest a
> drivers/media/platform/renesas/Kconfig|Makefile instead of instructing
> drivers/media/Kconfig|Makefile to fish in
> drivers/media/platform/renesas/rzg2l-cru/
>
> > 8 files changed, 1691 insertions(+)
> > create mode 100644 drivers/media/platform/renesas/rzg2l-cru/Kconfig
> > create mode 100644 drivers/media/platform/renesas/rzg2l-cru/Makefile
> > create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c
> > create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h
> > create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c
> > create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c
> >
> > diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> > index cf4adc64c953..4251c5686c2a 100644
> > --- a/drivers/media/platform/Kconfig
> > +++ b/drivers/media/platform/Kconfig
> > @@ -169,6 +169,7 @@ source "drivers/media/platform/exynos4-is/Kconfig"
> > source "drivers/media/platform/am437x/Kconfig"
> > source "drivers/media/platform/xilinx/Kconfig"
> > source "drivers/media/platform/rcar-vin/Kconfig"
> > +source "drivers/media/platform/renesas/rzg2l-cru/Kconfig"
> > source "drivers/media/platform/atmel/Kconfig"
> > source "drivers/media/platform/sunxi/Kconfig"
> >
> > diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
> > index a148553babfc..021d30a2c66c 100644
> > --- a/drivers/media/platform/Makefile
> > +++ b/drivers/media/platform/Makefile
> > @@ -66,6 +66,8 @@ obj-$(CONFIG_VIDEO_XILINX) += xilinx/
> > obj-$(CONFIG_VIDEO_RCAR_ISP) += rcar-isp.o
> > obj-$(CONFIG_VIDEO_RCAR_VIN) += rcar-vin/
> >
> > +obj-$(CONFIG_VIDEO_RZG2L_CRU) += renesas/rzg2l-cru/
> > +
> > obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel/
> > obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel/
> > obj-$(CONFIG_VIDEO_ATMEL_XISC) += atmel/
> > diff --git a/drivers/media/platform/renesas/rzg2l-cru/Kconfig b/drivers/media/platform/renesas/rzg2l-cru/Kconfig
> > new file mode 100644
> > index 000000000000..310baa4d4c14
> > --- /dev/null
> > +++ b/drivers/media/platform/renesas/rzg2l-cru/Kconfig
> > @@ -0,0 +1,15 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +
> > +config VIDEO_RZG2L_CRU
> > + tristate "RZ/G2L Camera Receiving Unit (CRU) Driver"
> > + depends on VIDEO_V4L2 && OF
> > + depends on ARCH_RENESAS || COMPILE_TEST
> > + select MEDIA_CONTROLLER
> > + select VIDEO_V4L2_SUBDEV_API
> > + select VIDEOBUF2_DMA_CONTIG
> > + select V4L2_FWNODE
> > + help
> > + Support for Renesas RZ/G2L Camera Receiving Unit (CRU) driver.
> > +
> > + To compile this driver as a module, choose M here: the
> > + module will be called rzg2l-cru.
> > diff --git a/drivers/media/platform/renesas/rzg2l-cru/Makefile b/drivers/media/platform/renesas/rzg2l-cru/Makefile
> > new file mode 100644
> > index 000000000000..8c307075f131
> > --- /dev/null
> > +++ b/drivers/media/platform/renesas/rzg2l-cru/Makefile
> > @@ -0,0 +1,4 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +rzg2l-cru-objs = rzg2l-core.o rzg2l-dma.o rzg2l-v4l2.o
> > +
> > +obj-$(CONFIG_VIDEO_RZG2L_CRU) += rzg2l-cru.o
> > diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c
> > new file mode 100644
> > index 000000000000..881bedaaff8f
> > --- /dev/null
> > +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c
> > @@ -0,0 +1,432 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Driver for Renesas RZ/G2L CRU
> > + *
> > + * Copyright (C) 2022 Renesas Electronics Corp.
> > + *
> > + * Based on Renesas R-Car VIN
> > + * Copyright (C) 2011-2013 Renesas Solutions Corp.
> > + * Copyright (C) 2013 Cogent Embedded, Inc., <source@cogentembedded.com>
> > + * Copyright (C) 2008 Magnus Damm
> > + */
> > +
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/of_graph.h>
>
> <linux/mod_devicetable.h> for struct of_device_id.
> Even if I assume it's included by other headers
>
OK will add this.
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/slab.h>
>
> Is slab.h needed ?
>
Not required will drop.
> > +#include <linux/sys_soc.h>
>
> Also sys_soc.h seems not needed
>
Agreed will drop.
> > +
> > +#include <media/v4l2-async.h>
>
> v4l2-async is included by rzg2l-cru.h
>
Agreed will drop.
> > +#include <media/v4l2-fwnode.h>
> > +#include <media/v4l2-mc.h>
> > +
> > +#include "rzg2l-cru.h"
> > +
> > +#define v4l2_dev_to_cru(d) container_of(d, struct rzg2l_cru_dev, v4l2_dev)
> > +
> > +static int rzg2l_cru_csi2_link_notify(struct media_link *link, u32 flags,
> > + unsigned int notification)
> > +{
> > + struct media_entity *entity;
> > + struct rzg2l_cru_dev *cru;
> > + struct video_device *vdev;
> > + struct media_pad *csi_pad;
> > + struct v4l2_subdev *sd;
> > + int ret;
> > +
> > + ret = v4l2_pipeline_link_notify(link, flags, notification);
> > + if (ret)
> > + return ret;
> > +
> > + /* Only care about link enablement for CRU nodes. */
> > + if (!(flags & MEDIA_LNK_FL_ENABLED) ||
> > + !is_media_entity_v4l2_video_device(link->sink->entity))
>
> Can you get a notification for an entity which is not your video
> device one ?
>
Right !is_media_entity_v4l2_video_device(link->sink->entity) check can
be dropped.
> > + return 0;
> > +
> > + cru = container_of(link->graph_obj.mdev, struct rzg2l_cru_dev, mdev);
> > + /*
> > + * Don't allow link changes if any entity in the graph is
> > + * streaming, modifying the CHSEL register fields can disrupt
> > + * running streams.
> > + */
> > + media_device_for_each_entity(entity, &cru->mdev)
> > + if (entity->pads->stream_count)
> > + return -EBUSY;
> > +
> > + mutex_lock(&cru->mdev_lock);
> > + vdev = media_entity_to_video_device(link->sink->entity);
> > +
> > + csi_pad = media_entity_remote_pad(&cru->vdev.entity.pads[0]);
> > + if (csi_pad) {
> > + ret = -EMLINK;
> > + goto out;
> > + }
> > +
> > + sd = media_entity_to_v4l2_subdev(link->source->entity);
> > + if (cru->csi.subdev == sd) {
> > + cru->csi.channel = link->source->index - 1;
>
> So the virtual channel selection is done based on the CSI-2 source pad
> number connected to single video dev sink pad.
>
Yes.
> I then wonder what the rzg2l_csi2_get_frame_desc() is used for (since
> it is not called from here afaict).
>
> I think, since there doesn't seem to be any complex routing in the CRU
> as there is in VINs, that the VC the CSI-2 rx receives as input should
> be propagated to this driver by inspecting the CSI-2 frame desc ? Or
> is there any routing I have missed like there is one between the R-Car
> CSI-2 rx and R-Car VIN ?
>
Sorry, are you suggesting to drop rzg2l_csi2_get_frame_desc(). Could
you please elaborate on this.
> In the R-Car VIN driver the links setup between
> csi-2 and vin serves to set-up the pixel link and route data between
> the CSI-2 and the VIN but here it seems the CRU wants the virtual
> channel as received from the CSI-2 rx ?
>
Yes that's right.
> VCSEL[1:0]
> Specify a virtual channel to be processed by the image processing module.
> A single channel specified by the register is selected from virtual channels 0 to 3.
>
> As the CRU can capture one VC at the time if I got it right.
>
You are right, CRU can capture one VC at a time.
> > + cru->is_csi = true;
> > + } else {
> > + ret = -ENODEV;
>
> So using a parallel sensor would return -ENODEV ?
>
Yes for now.
> > + }
> > +
> > +out:
> > + mutex_unlock(&cru->mdev_lock);
> > +
> > + return ret;
> > +}
> > +
> > +static const struct media_device_ops rzg2l_cru_media_ops = {
> > + .link_notify = rzg2l_cru_csi2_link_notify,
> > +};
> > +
> > +static void rzg2l_cru_put(struct rzg2l_cru_dev *cru)
> > +{
> > + mutex_lock(&cru->mdev_lock);
> > + cru->v4l2_dev.mdev = NULL;
> > + mutex_unlock(&cru->mdev_lock);
> > +}
>
> Called from a single place, could be open coded and I'm not sure it
> needs any locking, as the single caller is in the driver probe() call
> path
>
Agreed will move the chunk in the caller.
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Group async notifier
> > + */
> > +
> > +static int rzg2l_cru_group_notify_complete(struct v4l2_async_notifier *notifier)
>
> Compared to R-Car VIN, where the CSI-2 rx instances can be routed to
> several VINs, don't the CRU and CSI-2 rx for the RZ/GL always go
> together. IOW will there be multiple CSI-2 rx instances connected to a
> single CRU ? If not, this can be simplified and the whole concept of
> 'group' can be removed ?
>
Agreed the concept of group can be dropped as there will be single
CSI-2 instance connected to the single CRU.
> > +{
> > + struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev);
> > + unsigned int i;
> > + int ret;
> > +
> > + ret = media_device_register(&cru->mdev);
> > + if (ret)
> > + return ret;
> > +
> > + ret = v4l2_device_register_subdev_nodes(&cru->v4l2_dev);
> > + if (ret) {
> > + dev_err(cru->dev, "Failed to register subdev nodes\n");
> > + return ret;
> > + }
> > +
> > + if (!video_is_registered(&cru->vdev)) {
> > + ret = rzg2l_cru_v4l2_register(cru);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + /* Create all media device links between CRU and CSI-2's. */
> > + for (i = 1; i <= CSI2_VCHANNEL; i++) {
> > + struct media_entity *source, *sink;
> > +
> > + source = &cru->csi.subdev->entity;
> > + sink = &cru->vdev.entity;
> > +
> > + ret = media_create_pad_link(source, i, sink, 0, 0);
> > + if (ret) {
> > + dev_err(cru->dev, "Error adding link from %s to %s\n",
> > + source->name, sink->name);
> > + break;
> > + }
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static void rzg2l_cru_group_notify_unbind(struct v4l2_async_notifier *notifier,
> > + struct v4l2_subdev *subdev,
> > + struct v4l2_async_subdev *asd)
> > +{
> > + struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev);
> > +
> > + rzg2l_cru_v4l2_unregister(cru);
> > +
> > + mutex_lock(&cru->mdev_lock);
>
> Is locking needed ?
Can be dropped.
> > +
> > + if (cru->csi.asd == asd) {
> > + cru->csi.subdev = NULL;
> > + dev_dbg(cru->dev, "Unbind CSI-2 %s\n", subdev->name);
> > + }
> > +
> > + mutex_unlock(&cru->mdev_lock);
> > +
> > + media_device_unregister(&cru->mdev);
> > +}
> > +
> > +static int rzg2l_cru_group_notify_bound(struct v4l2_async_notifier *notifier,
> > + struct v4l2_subdev *subdev,
> > + struct v4l2_async_subdev *asd)
> > +{
> > + struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev);
> > + unsigned int i;
> > +
> > + mutex_lock(&cru->mdev_lock);
>
> Is locking needed ?
>
Ditto.
> > +
> > + if (cru->csi.asd == asd) {
> > + cru->csi.subdev = subdev;
> > + dev_dbg(cru->dev, "Bound CSI-2 %s to slot %u\n", subdev->name, i);
> > + }
> > +
> > + mutex_unlock(&cru->mdev_lock);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct v4l2_async_notifier_operations rzg2l_cru_async_ops = {
> > + .bound = rzg2l_cru_group_notify_bound,
> > + .unbind = rzg2l_cru_group_notify_unbind,
> > + .complete = rzg2l_cru_group_notify_complete,
> > +};
> > +
> > +static int rvin_mc_parse_of(struct rzg2l_cru_dev *cru, unsigned int id)
> > +{
> > + struct v4l2_fwnode_endpoint vep = {
> > + .bus_type = V4L2_MBUS_CSI2_DPHY,
> > + };
> > + struct fwnode_handle *ep, *fwnode;
> > + struct v4l2_async_subdev *asd;
> > + int ret;
> > +
> > + ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(cru->dev), 1, id, 0);
> > + if (!ep)
> > + return 0;
> > +
> > + fwnode = fwnode_graph_get_remote_endpoint(ep);
> > + ret = v4l2_fwnode_endpoint_parse(ep, &vep);
> > + fwnode_handle_put(ep);
> > + if (ret) {
> > + dev_err(cru->dev, "Failed to parse %pOF\n", to_of_node(fwnode));
> > + ret = -EINVAL;
> > + goto out;
> > + }
> > +
> > + if (!of_device_is_available(to_of_node(fwnode))) {
> > + dev_dbg(cru->dev, "OF device %pOF disabled, ignoring\n",
> > + to_of_node(fwnode));
> > + ret = -ENOTCONN;
> > + goto out;
> > + }
> > +
> > + asd = v4l2_async_nf_add_fwnode(&cru->notifier, fwnode,
> > + struct v4l2_async_subdev);
> > + if (IS_ERR(asd)) {
> > + ret = PTR_ERR(asd);
> > + goto out;
> > + }
> > +
> > + cru->csi.asd = asd;
> > +
> > + dev_dbg(cru->dev, "Added OF device %pOF to slot %u\n",
> > + to_of_node(fwnode), vep.base.id);
> > +out:
> > + fwnode_handle_put(fwnode);
> > +
> > + return ret;
> > +}
> > +
> > +static int rzg2l_cru_mc_parse_of_graph(struct rzg2l_cru_dev *cru)
> > +{
> > + int ret;
> > +
> > + v4l2_async_nf_init(&cru->notifier);
> > +
> > + ret = rvin_mc_parse_of(cru, 0);
> > + if (ret)
> > + return ret;
> > +
> > + cru->notifier.ops = &rzg2l_cru_async_ops;
> > +
> > + if (list_empty(&cru->notifier.asd_list))
> > + return 0;
> > +
> > + ret = v4l2_async_nf_register(&cru->v4l2_dev, &cru->notifier);
> > + if (ret < 0) {
> > + dev_err(cru->dev, "Notifier registration failed\n");
> > + v4l2_async_nf_cleanup(&cru->notifier);
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int rzg2l_cru_csi2_init(struct rzg2l_cru_dev *cru)
> > +{
> > + struct media_device *mdev = NULL;
> > + const struct of_device_id *match;
> > + int ret;
> > +
> > + cru->pad.flags = MEDIA_PAD_FL_SINK;
> > + ret = media_entity_pads_init(&cru->vdev.entity, 1, &cru->pad);
> > + if (ret)
> > + return ret;
> > +
> > + mutex_init(&cru->mdev_lock);
> > + mdev = &cru->mdev;
> > + mdev->dev = cru->dev;
> > + mdev->ops = &rzg2l_cru_media_ops;
> > +
> > + match = of_match_node(cru->dev->driver->of_match_table,
> > + cru->dev->of_node);
> > +
> > + strscpy(mdev->driver_name, KBUILD_MODNAME, sizeof(mdev->driver_name));
> > + strscpy(mdev->model, match->compatible, sizeof(mdev->model));
> > + snprintf(mdev->bus_info, sizeof(mdev->bus_info), "platform:%s",
> > + dev_name(mdev->dev));
> > +
> > + cru->v4l2_dev.mdev = &cru->mdev;
> > +
> > + media_device_init(mdev);
> > +
> > + ret = rzg2l_cru_mc_parse_of_graph(cru);
> > + if (ret)
> > + rzg2l_cru_put(cru);
> > +
> > + return 0;
> > +}
> > +
> > +static int rzg2l_cru_s_ctrl(struct v4l2_ctrl *ctrl)
> > +{
> > + struct rzg2l_cru_dev *cru = container_of(ctrl->handler,
> > + struct rzg2l_cru_dev,
> > + ctrl_handler);
> > + int ret = 0;
> > +
> > + switch (ctrl->id) {
> > + case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE:
>
> What is the purpose of having this controllable with a ctrl ?
>
The CRU block supports upto 8 destination buffers. This control
enables selecting the number of buffers.
> > + if (cru->state == RZG2L_CRU_DMA_STOPPED ||
> > + cru->state == RZG2L_CRU_DMA_STOPPING)
> > + cru->num_buf = ctrl->val;
> > + else
> > + ret = -EBUSY;
> > +
> > + break;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static const struct v4l2_ctrl_ops rzg2l_cru_ctrl_ops = {
> > + .s_ctrl = rzg2l_cru_s_ctrl,
> > +};
> > +
> > +static int rzg2l_cru_probe(struct platform_device *pdev)
> > +{
> > + struct rzg2l_cru_dev *cru;
> > + struct v4l2_ctrl *ctrl;
> > + int irq, ret;
> > +
> > + cru = devm_kzalloc(&pdev->dev, sizeof(*cru), GFP_KERNEL);
> > + if (!cru)
> > + return -ENOMEM;
> > +
> > + cru->base = devm_platform_ioremap_resource(pdev, 0);
> > + if (IS_ERR(cru->base))
> > + return PTR_ERR(cru->base);
> > +
> > + cru->presetn = devm_reset_control_get(&pdev->dev, "presetn");
> > + if (IS_ERR(cru->presetn))
> > + return dev_err_probe(&pdev->dev, PTR_ERR(cru->presetn),
> > + "failed to get cpg presetn\n");
> > +
> > + cru->aresetn = devm_reset_control_get(&pdev->dev, "aresetn");
> > + if (IS_ERR(cru->aresetn))
> > + return dev_err_probe(&pdev->dev, PTR_ERR(cru->aresetn),
> > + "failed to get cpg aresetn\n");
> > +
> > + cru->dev = &pdev->dev;
> > + cru->info = of_device_get_match_data(&pdev->dev);
> > +
> > + irq = platform_get_irq(pdev, 0);
> > + if (irq < 0)
> > + return irq;
> > +
> > + ret = rzg2l_cru_dma_register(cru, irq);
> > + if (ret)
> > + return ret;
> > +
> > + platform_set_drvdata(pdev, cru);
> > +
> > + ret = rzg2l_cru_csi2_init(cru);
> > + if (ret)
> > + goto error_dma_unregister;
> > +
> > + v4l2_ctrl_handler_init(&cru->ctrl_handler, 1);
> > + ctrl = v4l2_ctrl_new_std(&cru->ctrl_handler, &rzg2l_cru_ctrl_ops,
> > + V4L2_CID_MIN_BUFFERS_FOR_CAPTURE,
> > + 1, HW_BUFFER_MAX, 1, HW_BUFFER_DEFAULT);
> > + if (cru->ctrl_handler.error) {
> > + dev_err(&pdev->dev, "%s: control initialization error %d\n",
> > + __func__, cru->ctrl_handler.error);
> > + ret = cru->ctrl_handler.error;
> > + goto free_ctrl;
> > + }
> > +
> > + ctrl->flags &= ~V4L2_CTRL_FLAG_READ_ONLY;
>
> Is this necessary ?
>
Not required.
> > + cru->v4l2_dev.ctrl_handler = &cru->ctrl_handler;
> > +
> > + cru->num_buf = HW_BUFFER_DEFAULT;
> > +
> > + pm_suspend_ignore_children(&pdev->dev, true);
> > + pm_runtime_enable(&pdev->dev);
>
> Are there pm_runtime operations associated with this driver ?
>
Yes they are (called in rzgl2-v4l2.c)
> > +
> > + return 0;
> > +
> > +free_ctrl:
> > + v4l2_ctrl_handler_free(&cru->ctrl_handler);
> > +error_dma_unregister:
> > + rzg2l_cru_dma_unregister(cru);
> > +
> > + return ret;
> > +}
> > +
> > +static const struct rzg2l_cru_info rzg2l_cru_info_generic = {
> > + .max_width = 2800,
> > + .max_height = 4096,
> > +};
>
> This implies you expect different revisions to have differe input size
> limitations, right ?
>
For RZ/G2{L,LC}, RZ/V2L, RZ/G2UL have the same input size. So for now
I can drop rzg2l_cru_info_generic completely and just use them as
macros instead. And in future if there is a user of this IP block with
different input sizes we could introduce the data back.
> > +
> > +static const struct of_device_id rzg2l_cru_of_id_table[] = {
> > + {
> > + .compatible = "renesas,rzg2l-cru",
> > + .data = &rzg2l_cru_info_generic,
> > + },
> > + { /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, rzg2l_cru_of_id_table);
> > +
> > +static int rzg2l_cru_remove(struct platform_device *pdev)
> > +{
> > + struct rzg2l_cru_dev *cru = platform_get_drvdata(pdev);
> > +
> > + pm_runtime_disable(&pdev->dev);
> > +
> > + rzg2l_cru_v4l2_unregister(cru);
> > +
> > + v4l2_async_nf_unregister(&cru->notifier);
> > + v4l2_async_nf_cleanup(&cru->notifier);
> > +
> > + media_device_cleanup(&cru->mdev);
> > + mutex_destroy(&cru->mdev_lock);
> > + cru->v4l2_dev.mdev = NULL;
> > +
> > + v4l2_ctrl_handler_free(&cru->ctrl_handler);
> > + cru->vdev.ctrl_handler = NULL;
> > +
> > + rzg2l_cru_dma_unregister(cru);
> > +
> > + return 0;
> > +}
> > +
> > +static struct platform_driver rzg2l_cru_driver = {
> > + .driver = {
> > + .name = "rzg2l-cru",
> > + .of_match_table = rzg2l_cru_of_id_table,
> > + },
> > + .probe = rzg2l_cru_probe,
> > + .remove = rzg2l_cru_remove,
> > +};
> > +
> > +module_platform_driver(rzg2l_cru_driver);
> > +
> > +MODULE_DESCRIPTION("Renesas RZ/G2L CRU driver");
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h
> > new file mode 100644
> > index 000000000000..91a28279846e
> > --- /dev/null
> > +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h
> > @@ -0,0 +1,155 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +/*
> > + * Driver for Renesas RZ/G2L CRU
> > + *
> > + * Copyright (C) 2022 Renesas Electronics Corp.
> > + *
> > + */
> > +
> > +#ifndef __RZG2L_CRU__
> > +#define __RZG2L_CRU__
> > +
> > +#include <linux/clk.h>
> > +#include <linux/reset.h>
> > +
> > +#include <media/v4l2-async.h>
> > +#include <media/v4l2-ctrls.h>
> > +#include <media/v4l2-dev.h>
> > +#include <media/v4l2-device.h>
> > +#include <media/videobuf2-v4l2.h>
> > +
> > +/* Number of HW buffers */
> > +#define HW_BUFFER_MAX 8
> > +#define HW_BUFFER_DEFAULT 3
> > +
> > +/* Address alignment mask for HW buffers */
> > +#define HW_BUFFER_MASK 0x1ff
> > +
> > +/* Maximum number of CSI2 virtual channels */
> > +#define CSI2_VCHANNEL 4
> > +
> > +/**
> > + * enum rzg2l_cru_dma_state - DMA states
> > + * @RZG2L_CRU_DMA_STOPPED: No operation in progress
> > + * @RZG2L_CRU_DMA_STARTING: Capture starting up
> > + * @RZG2L_CRU_DMA_RUNNING: Operation in progress have buffers
> > + * @RZG2L_CRU_DMA_STOPPING: Stopping operation
> > + */
> > +enum rzg2l_cru_dma_state {
> > + RZG2L_CRU_DMA_STOPPED = 0,
> > + RZG2L_CRU_DMA_STARTING,
> > + RZG2L_CRU_DMA_RUNNING,
> > + RZG2L_CRU_DMA_STOPPING,
> > +};
> > +
> > +/**
> > + * struct rzg2l_cru_info - Information about the particular CRU implementation
> > + * @max_width: max input width the CRU supports
> > + * @max_height: max input height the CRU supports
> > + */
> > +struct rzg2l_cru_info {
> > + unsigned int max_width;
> > + unsigned int max_height;
> > +};
> > +
> > +struct rzg2l_cru_csi {
> > + struct v4l2_async_subdev *asd;
> > + struct v4l2_subdev *subdev;
> > + u32 channel;
> > +};
> > +
> > +/**
> > + * struct rzg2l_cru_dev - Renesas CRU device structure
> > + * @dev: (OF) device
> > + * @base: device I/O register space remapped to virtual memory
> > + * @info: info about CRU instance
> > + *
> > + * @presetn: CRU_PRESETN reset line
> > + * @aresetn: CRU_ARESETN reset line
> > + *
> > + * @vdev: V4L2 video device associated with CRU
> > + * @v4l2_dev: V4L2 device
> > + * @ctrl_handler: V4L2 control handler
> > + * @num_buf: Holds the current number of buffers enabled
> > + * @notifier: V4L2 asynchronous subdevs notifier
> > + *
> > + * @csi: CSI info
> > + * @mdev: media device
> > + * @mdev_lock: protects the count, notifier and csi members
> > + * @pad: media pad for the video device entity
> > + *
> > + * @lock: protects @queue
> > + * @queue: vb2 buffers queue
> > + * @scratch: cpu address for scratch buffer
> > + * @scratch_phys: physical address of the scratch buffer
> > + *
> > + * @qlock: protects @queue_buf, @buf_list, @sequence
> > + * @state
> > + * @queue_buf: Keeps track of buffers given to HW slot
> > + * @buf_list: list of queued buffers
> > + * @sequence: V4L2 buffers sequence number
> > + * @state: keeps track of operation state
> > + *
> > + * @is_csi: flag to mark the CRU as using a CSI-2 subdevice
> > + *
> > + * @input_is_yuv: flag to mark the input format of CRU
> > + * @output_is_yuv: flag to mark the output format of CRU
> > + *
> > + * @mbus_code: media bus format code
> > + * @format: active V4L2 pixel format
> > + *
> > + * @compose: active composing
> > + * @source: active size of the video source
> > + * @std: active video standard of the video source
>
>
> These last fields seems not to be present in the structure
>
Will drop that.
> > + */
> > +struct rzg2l_cru_dev {
> > + struct device *dev;
> > + void __iomem *base;
> > + const struct rzg2l_cru_info *info;
> > +
> > + struct reset_control *presetn;
> > + struct reset_control *aresetn;
> > +
> > + struct video_device vdev;
> > + struct v4l2_device v4l2_dev;
> > + struct v4l2_ctrl_handler ctrl_handler;
> > + u8 num_buf;
> > +
> > + struct v4l2_async_notifier notifier;
> > +
> > + struct rzg2l_cru_csi csi;
> > + struct media_device mdev;
> > + struct mutex mdev_lock;
> > + struct media_pad pad;
> > +
> > + struct mutex lock;
> > + struct vb2_queue queue;
> > + void *scratch;
> > + dma_addr_t scratch_phys;
> > +
> > + spinlock_t qlock;
> > + struct vb2_v4l2_buffer *queue_buf[HW_BUFFER_MAX];
> > + struct list_head buf_list;
> > + unsigned int sequence;
> > + enum rzg2l_cru_dma_state state;
> > +
> > + bool is_csi;
> > +
> > + bool input_is_yuv;
> > + bool output_is_yuv;
> > +
> > + u32 mbus_code;
> > + struct v4l2_pix_format format;
> > +
> > + struct v4l2_rect compose;
> > +};
> > +
> > +int rzg2l_cru_dma_register(struct rzg2l_cru_dev *cru, int irq);
> > +void rzg2l_cru_dma_unregister(struct rzg2l_cru_dev *cru);
> > +
> > +int rzg2l_cru_v4l2_register(struct rzg2l_cru_dev *cru);
> > +void rzg2l_cru_v4l2_unregister(struct rzg2l_cru_dev *cru);
> > +
> > +const struct v4l2_format_info *rzg2l_cru_format_from_pixel(u32 format);
> > +
> > +#endif
> > diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c
> > new file mode 100644
> > index 000000000000..0fcf4baccca9
> > --- /dev/null
> > +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-dma.c
> > @@ -0,0 +1,722 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Driver for Renesas RZ/G2L CRU
> > + *
> > + * Copyright (C) 2022 Renesas Electronics Corp.
> > + *
> > + * Based on Renesas R-Car VIN
> > + * Copyright (C) 2011-2013 Renesas Solutions Corp.
> > + * Copyright (C) 2013 Cogent Embedded, Inc., <source@cogentembedded.com>
> > + * Copyright (C) 2008 Magnus Damm
> > + */
> > +
> > +#include <linux/delay.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/module.h>
> > +#include <linux/pm_runtime.h>
> > +
> > +#include <media/videobuf2-dma-contig.h>
> > +
> > +#include "rzg2l-cru.h"
> > +
> > +/* HW CRU Registers Definition */
> > +/* CRU Control Register */
> > +#define CRUnCTRL 0x0
> > +#define CRUnCTRL_VINSEL(x) ((x) << 0)
> > +
> > +/* CRU Interrupt Enable Register */
> > +#define CRUnIE 0x4
> > +#define CRUnIE_SFE BIT(16)
> > +#define CRUnIE_EFE BIT(17)
> > +
> > +/* CRU Interrupt Status Register */
> > +#define CRUnINTS 0x8
> > +#define CRUnINTS_SFS BIT(16)
> > +
> > +/* CRU Reset Register */
> > +#define CRUnRST 0xc
> > +#define CRUnRST_VRESETN BIT(0)
> > +
> > +/* Memory Bank Base Address (Lower) Register for CRU Image Data */
> > +#define AMnMBxADDRL(x) (0x100 + ((x) * 8))
> > +
> > +/* Memory Bank Base Address (Higher) Register for CRU Image Data */
> > +#define AMnMBxADDRH(x) (0x104 + ((x) * 8))
> > +
> > +/* Memory Bank Enable Register for CRU Image Data */
> > +#define AMnMBVALID 0x148
> > +#define AMnMBVALID_MBVALID(x) GENMASK(x, 0)
> > +
> > +/* Memory Bank Status Register for CRU Image Data */
> > +#define AMnMBS 0x14c
> > +#define AMnMBS_MBSTS 0x7
> > +
> > +/* AXI Master FIFO Pointer Register for CRU Image Data */
> > +#define AMnFIFOPNTR 0x168
> > +#define AMnFIFOPNTR_FIFOWPNTR GENMASK(7, 0)
> > +#define AMnFIFOPNTR_FIFORPNTR_Y GENMASK(23, 16)
> > +
> > +/* AXI Master Transfer Stop Register for CRU Image Data */
> > +#define AMnAXISTP 0x174
> > +#define AMnAXISTP_AXI_STOP BIT(0)
> > +
> > +/* AXI Master Transfer Stop Status Register for CRU Image Data */
> > +#define AMnAXISTPACK 0x178
> > +#define AMnAXISTPACK_AXI_STOP_ACK BIT(0)
> > +
> > +/* CRU Image Processing Enable Register */
> > +#define ICnEN 0x200
> > +#define ICnEN_ICEN BIT(0)
> > +
> > +/* CRU Image Processing Main Control Register */
> > +#define ICnMC 0x208
> > +#define ICnMC_CSCTHR BIT(5)
> > +#define ICnMC_INF_YUV8_422 (0x1e << 16)
> > +#define ICnMC_INF_USER (0x30 << 16)
> > +#define ICnMC_VCSEL(x) ((x) << 22)
> > +#define ICnMC_INF_MASK GENMASK(21, 16)
> > +
> > +/* CRU Module Status Register */
> > +#define ICnMS 0x254
> > +#define ICnMS_IA BIT(2)
> > +
> > +/* CRU Data Output Mode Register */
> > +#define ICnDMR 0x26c
> > +#define ICnDMR_YCMODE_UYVY (1 << 4)
> > +
> > +#define RZG2L_TIMEOUT_MS 100
> > +#define RZG2L_RETRIES 10
> > +
> > +struct rzg2l_cru_buffer {
> > + struct vb2_v4l2_buffer vb;
> > + struct list_head list;
> > +};
> > +
> > +#define to_buf_list(vb2_buffer) (&container_of(vb2_buffer, \
> > + struct rzg2l_cru_buffer, \
> > + vb)->list)
> > +
> > +static void rzg2l_cru_write(struct rzg2l_cru_dev *cru, u32 offset, u32 value)
> > +{
> > + iowrite32(value, cru->base + offset);
> > +}
> > +
> > +static u32 rzg2l_cru_read(struct rzg2l_cru_dev *cru, u32 offset)
> > +{
> > + return ioread32(cru->base + offset);
> > +}
> > +
> > +/* Need to hold qlock before calling */
> > +static void return_unused_buffers(struct rzg2l_cru_dev *cru,
> > + enum vb2_buffer_state state)
> > +{
> > + struct rzg2l_cru_buffer *buf, *node;
> > + unsigned long flags;
> > + unsigned int i;
> > +
> > + spin_lock_irqsave(&cru->qlock, flags);
> > + for (i = 0; i < cru->num_buf; i++) {
> > + if (cru->queue_buf[i]) {
> > + vb2_buffer_done(&cru->queue_buf[i]->vb2_buf,
> > + state);
> > + cru->queue_buf[i] = NULL;
> > + }
> > + }
> > +
> > + list_for_each_entry_safe(buf, node, &cru->buf_list, list) {
> > + vb2_buffer_done(&buf->vb.vb2_buf, state);
> > + list_del(&buf->list);
> > + }
> > + spin_unlock_irqrestore(&cru->qlock, flags);
> > +}
> > +
> > +static int rzg2l_cru_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
> > + unsigned int *nplanes, unsigned int sizes[],
> > + struct device *alloc_devs[])
> > +{
> > + struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vq);
> > +
> > + /* Make sure the image size is large enough. */
> > + if (*nplanes)
> > + return sizes[0] < cru->format.sizeimage ? -EINVAL : 0;
> > +
> > + *nplanes = 1;
> > + sizes[0] = cru->format.sizeimage;
> > +
> > + return 0;
> > +};
> > +
> > +static int rzg2l_cru_buffer_prepare(struct vb2_buffer *vb)
> > +{
> > + struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vb->vb2_queue);
> > + unsigned long size = cru->format.sizeimage;
> > +
> > + if (vb2_plane_size(vb, 0) < size) {
> > + dev_err(cru->dev, "buffer too small (%lu < %lu)\n",
> > + vb2_plane_size(vb, 0), size);
> > + return -EINVAL;
> > + }
> > +
> > + vb2_set_plane_payload(vb, 0, size);
> > +
> > + return 0;
> > +}
> > +
> > +static void rzg2l_cru_buffer_queue(struct vb2_buffer *vb)
> > +{
> > + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> > + struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vb->vb2_queue);
> > + unsigned long flags;
> > +
> > + spin_lock_irqsave(&cru->qlock, flags);
> > +
> > + list_add_tail(to_buf_list(vbuf), &cru->buf_list);
> > +
> > + spin_unlock_irqrestore(&cru->qlock, flags);
> > +}
> > +
> > +static int rzg2l_cru_mc_validate_format(struct rzg2l_cru_dev *cru,
> > + struct v4l2_subdev *sd,
> > + struct media_pad *pad)
>
> Isn't this better realized by installing a custom
> media_entity_operations.link_validate() operation in the vdev.entity ?
>
> There you can call v4l2_subdev_link_validate_default() to make sure
> the sizes and format on pads on each side of the link match and then
> perform additiona validations like the one you have here below ?
>
> The core will call it for you at media_pipeline_start() time.
> I think it should work for vdev.entities as well as for subdev
> entities ?
>
Thanks for the pointer. I will switch using to link_validate()
> I'll review the rest after I understood the CSI-2 part better.
>
I havent got your feedback on CSI-2 part yet :)
> Thanks
> j
>
>
Cheers,
Prabhakar
> > +{
> > + struct v4l2_subdev_format fmt = {
> > + .which = V4L2_SUBDEV_FORMAT_ACTIVE,
> > + };
> > +
> > + fmt.pad = pad->index;
> > + fmt.stream = 0;
> > + if (v4l2_subdev_call(sd, pad, get_fmt, v4l2_subdev_get_active_state(sd), &fmt))
> > + return -EPIPE;
> > +
> > + if (cru->is_csi) {
> > + switch (fmt.format.code) {
> > + case MEDIA_BUS_FMT_UYVY8_2X8:
> > + break;
> > + default:
> > + return -EPIPE;
> > + }
> > + }
> > + cru->mbus_code = fmt.format.code;
> > +
> > + switch (fmt.format.field) {
> > + case V4L2_FIELD_TOP:
> > + case V4L2_FIELD_BOTTOM:
> > + case V4L2_FIELD_NONE:
> > + case V4L2_FIELD_INTERLACED_TB:
> > + case V4L2_FIELD_INTERLACED_BT:
> > + case V4L2_FIELD_INTERLACED:
> > + case V4L2_FIELD_SEQ_TB:
> > + case V4L2_FIELD_SEQ_BT:
> > + break;
> > + default:
> > + return -EPIPE;
> > + }
> > +
> > + if (fmt.format.width != cru->format.width ||
> > + fmt.format.height != cru->format.height ||
> > + fmt.format.code != cru->mbus_code)
> > + return -EPIPE;
> > +
> > + return 0;
> > +}
> > +
> > +static void rzg2l_cru_set_slot_addr(struct rzg2l_cru_dev *cru,
> > + int slot, dma_addr_t addr)
> > +{
> > + const struct v4l2_format_info *fmt;
> > + int offsetx, offsety;
> > + dma_addr_t offset;
> > +
> > + fmt = rzg2l_cru_format_from_pixel(cru->format.pixelformat);
> > +
> > + /*
> > + * There is no HW support for composition do the best we can
> > + * by modifying the buffer offset
> > + */
> > + offsetx = cru->compose.left * fmt->bpp[0];
> > + offsety = cru->compose.top * cru->format.bytesperline;
> > + offset = addr + offsetx + offsety;
> > +
> > + /*
> > + * The address needs to be 512 bytes aligned. Driver should never accept
> > + * settings that do not satisfy this in the first place...
> > + */
> > + if (WARN_ON((offsetx | offsety | offset) & HW_BUFFER_MASK))
> > + return;
> > +
> > + /* Currently, we just use the buffer in 32 bits address */
> > + rzg2l_cru_write(cru, AMnMBxADDRL(slot), offset);
> > + rzg2l_cru_write(cru, AMnMBxADDRH(slot), 0);
> > +}
> > +
> > +/*
> > + * Moves a buffer from the queue to the HW slot. If no buffer is
> > + * available use the scratch buffer. The scratch buffer is never
> > + * returned to userspace, its only function is to enable the capture
> > + * loop to keep running.
> > + */
> > +static void rzg2l_cru_fill_hw_slot(struct rzg2l_cru_dev *cru, int slot)
> > +{
> > + struct vb2_v4l2_buffer *vbuf;
> > + struct rzg2l_cru_buffer *buf;
> > + dma_addr_t phys_addr;
> > +
> > + /* A already populated slot shall never be overwritten. */
> > + if (WARN_ON(cru->queue_buf[slot]))
> > + return;
> > +
> > + dev_dbg(cru->dev, "Filling HW slot: %d\n", slot);
> > +
> > + if (list_empty(&cru->buf_list)) {
> > + cru->queue_buf[slot] = NULL;
> > + phys_addr = cru->scratch_phys;
> > + } else {
> > + /* Keep track of buffer we give to HW */
> > + buf = list_entry(cru->buf_list.next,
> > + struct rzg2l_cru_buffer, list);
> > + vbuf = &buf->vb;
> > + list_del_init(to_buf_list(vbuf));
> > + cru->queue_buf[slot] = vbuf;
> > +
> > + /* Setup DMA */
> > + phys_addr = vb2_dma_contig_plane_dma_addr(&vbuf->vb2_buf, 0);
> > + }
> > +
> > + rzg2l_cru_set_slot_addr(cru, slot, phys_addr);
> > +}
> > +
> > +static void rzg2l_cru_initialize_axi(struct rzg2l_cru_dev *cru)
> > +{
> > + unsigned int slot;
> > +
> > + /*
> > + * Set image data memory banks.
> > + * Currently, we will use maximum address.
> > + */
> > + rzg2l_cru_write(cru, AMnMBVALID, AMnMBVALID_MBVALID(cru->num_buf - 1));
> > +
> > + for (slot = 0; slot < cru->num_buf; slot++)
> > + rzg2l_cru_fill_hw_slot(cru, slot);
> > +}
> > +
> > +static void rzg2l_cru_csi2_setup(struct rzg2l_cru_dev *cru)
> > +{
> > + u32 icnmc;
> > +
> > + switch (cru->mbus_code) {
> > + case MEDIA_BUS_FMT_UYVY8_2X8:
> > + icnmc = ICnMC_INF_YUV8_422;
> > + cru->input_is_yuv = true;
> > + break;
> > + default:
> > + cru->input_is_yuv = false;
> > + icnmc = ICnMC_INF_USER;
> > + break;
> > + }
> > +
> > + icnmc |= (rzg2l_cru_read(cru, ICnMC) & ~ICnMC_INF_MASK);
> > +
> > + /* Set virtual channel CSI2 */
> > + icnmc |= ICnMC_VCSEL(cru->csi.channel);
> > +
> > + rzg2l_cru_write(cru, ICnMC, icnmc);
> > +}
> > +
> > +static int rzg2l_cru_initialize_image_conv(struct rzg2l_cru_dev *cru)
> > +{
> > + u32 icndmr;
> > +
> > + if (cru->is_csi)
> > + rzg2l_cru_csi2_setup(cru);
> > +
> > + /* Output format */
> > + switch (cru->format.pixelformat) {
> > + case V4L2_PIX_FMT_UYVY:
> > + icndmr = ICnDMR_YCMODE_UYVY;
> > + cru->output_is_yuv = true;
> > + break;
> > + default:
> > + dev_err(cru->dev, "Invalid pixelformat (0x%x)\n",
> > + cru->format.pixelformat);
> > + return -EINVAL;
> > + }
> > +
> > + /* If input and output use same colorspace, do bypass mode */
> > + if (cru->output_is_yuv == cru->input_is_yuv)
> > + rzg2l_cru_write(cru, ICnMC,
> > + rzg2l_cru_read(cru, ICnMC) | ICnMC_CSCTHR);
> > + else
> > + rzg2l_cru_write(cru, ICnMC,
> > + rzg2l_cru_read(cru, ICnMC) & (~ICnMC_CSCTHR));
> > +
> > + /* Set output data format */
> > + rzg2l_cru_write(cru, ICnDMR, icndmr);
> > +
> > + return 0;
> > +}
> > +
> > +static int rzg2l_cru_set_stream(struct rzg2l_cru_dev *cru, int on)
> > +{
> > + struct media_pipeline *pipe;
> > + struct v4l2_subdev *sd;
> > + struct media_pad *pad;
> > + unsigned long flags;
> > + int ret;
> > +
> > + pad = media_entity_remote_pad(&cru->pad);
> > + if (!pad)
> > + return -EPIPE;
> > +
> > + sd = media_entity_to_v4l2_subdev(pad->entity);
> > +
> > + if (!on) {
> > + media_pipeline_stop(cru->vdev.entity.pads);
> > + return v4l2_subdev_call(sd, video, s_stream, 0);
> > + }
> > +
> > + ret = rzg2l_cru_mc_validate_format(cru, sd, pad);
> > + if (ret)
> > + return ret;
> > +
> > + spin_lock_irqsave(&cru->qlock, flags);
> > +
> > + /* Select a video input */
> > + if (cru->is_csi)
> > + rzg2l_cru_write(cru, CRUnCTRL, CRUnCTRL_VINSEL(0));
> > +
> > + /* Cancel the software reset for image processing block */
> > + rzg2l_cru_write(cru, CRUnRST, CRUnRST_VRESETN);
> > +
> > + /* Disable and clear the interrupt before using */
> > + rzg2l_cru_write(cru, CRUnIE, 0);
> > + rzg2l_cru_write(cru, CRUnINTS, 0x001f000f);
> > +
> > + /* Initialize the AXI master */
> > + rzg2l_cru_initialize_axi(cru);
> > +
> > + /* Initialize image convert */
> > + ret = rzg2l_cru_initialize_image_conv(cru);
> > + if (ret) {
> > + spin_unlock_irqrestore(&cru->qlock, flags);
> > + return ret;
> > + }
> > +
> > + /* Enable interrupt */
> > + rzg2l_cru_write(cru, CRUnIE, CRUnIE_EFE);
> > +
> > + /* Enable image processing reception */
> > + rzg2l_cru_write(cru, ICnEN, ICnEN_ICEN);
> > +
> > + spin_unlock_irqrestore(&cru->qlock, flags);
> > +
> > + pipe = sd->entity.pads->pipe ? sd->entity.pads->pipe : &cru->vdev.pipe;
> > + ret = media_pipeline_start(cru->vdev.entity.pads, pipe);
> > + if (ret)
> > + return ret;
> > +
> > + ret = v4l2_subdev_call(sd, video, s_stream, 1);
> > + if (ret == -ENOIOCTLCMD)
> > + ret = 0;
> > + if (ret)
> > + media_pipeline_stop(cru->vdev.entity.pads);
> > +
> > + return ret;
> > +}
> > +
> > +static void rzg2l_cru_stop_streaming(struct rzg2l_cru_dev *cru)
> > +{
> > + u32 amnfifopntr, amnfifopntr_w, amnfifopntr_r_y;
> > + unsigned int retries = 0;
> > + unsigned long flags;
> > + u32 icnms;
> > +
> > + cru->state = RZG2L_CRU_DMA_STOPPING;
> > +
> > + rzg2l_cru_set_stream(cru, 0);
> > +
> > + spin_lock_irqsave(&cru->qlock, flags);
> > +
> > + /* Enable IRQ to detect frame start reception */
> > + rzg2l_cru_write(cru, CRUnINTS,
> > + (~rzg2l_cru_read(cru, CRUnINTS)) | CRUnINTS_SFS);
> > + rzg2l_cru_write(cru, CRUnIE, CRUnIE_SFE);
> > +
> > + /* Wait for streaming to stop */
> > + while (retries++ < RZG2L_RETRIES) {
> > + spin_unlock_irqrestore(&cru->qlock, flags);
> > + msleep(RZG2L_TIMEOUT_MS);
> > + spin_lock_irqsave(&cru->qlock, flags);
> > + }
> > +
> > + icnms = rzg2l_cru_read(cru, ICnMS) & ICnMS_IA;
> > + if (icnms)
> > + dev_err(cru->dev, "Failed stop HW, something is seriously broken\n");
> > +
> > + cru->state = RZG2L_CRU_DMA_STOPPED;
> > +
> > + /* Stop the operation of image conversion */
> > + rzg2l_cru_write(cru, ICnEN, 0);
> > +
> > + /* Disable and clear the interrupt */
> > + rzg2l_cru_write(cru, CRUnIE, 0);
> > + rzg2l_cru_write(cru, CRUnINTS, 0x001F0F0F);
> > +
> > + /* Wait until the FIFO becomes empty */
> > + for (retries = 5; retries > 0; retries--) {
> > + amnfifopntr = rzg2l_cru_read(cru, AMnFIFOPNTR);
> > +
> > + amnfifopntr_w = amnfifopntr & AMnFIFOPNTR_FIFOWPNTR;
> > + amnfifopntr_r_y =
> > + (amnfifopntr & AMnFIFOPNTR_FIFORPNTR_Y) >> 16;
> > + if (amnfifopntr_w == amnfifopntr_r_y)
> > + break;
> > +
> > + usleep_range(10, 20);
> > + }
> > +
> > + /* Notify that FIFO is not empty here */
> > + if (!retries)
> > + dev_err(cru->dev, "Failed to empty FIFO\n");
> > +
> > + /* Stop AXI bus */
> > + rzg2l_cru_write(cru, AMnAXISTP, AMnAXISTP_AXI_STOP);
> > +
> > + /* Wait until the AXI bus stop */
> > + for (retries = 5; retries > 0; retries--) {
> > + if (rzg2l_cru_read(cru, AMnAXISTPACK) &
> > + AMnAXISTPACK_AXI_STOP_ACK)
> > + break;
> > +
> > + usleep_range(10, 20);
> > + };
> > +
> > + /* Notify that AXI bus can not stop here */
> > + if (!retries)
> > + dev_err(cru->dev, "Failed to stop AXI bus\n");
> > +
> > + /* Cancel the AXI bus stop request */
> > + rzg2l_cru_write(cru, AMnAXISTP, 0);
> > +
> > + /* Resets the image processing module */
> > + rzg2l_cru_write(cru, CRUnRST, 0);
> > +
> > + spin_unlock_irqrestore(&cru->qlock, flags);
> > +
> > + /* Set reset state */
> > + reset_control_assert(cru->aresetn);
> > +}
> > +
> > +static int rzg2l_cru_start_streaming_vq(struct vb2_queue *vq, unsigned int count)
> > +{
> > + struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vq);
> > + int ret;
> > +
> > + /* Release reset state */
> > + ret = reset_control_deassert(cru->aresetn);
> > + if (ret) {
> > + dev_err(cru->dev, "failed to deassert aresetn\n");
> > + return ret;
> > + }
> > +
> > + /* Allocate scratch buffer. */
> > + cru->scratch = dma_alloc_coherent(cru->dev, cru->format.sizeimage,
> > + &cru->scratch_phys, GFP_KERNEL);
> > + if (!cru->scratch) {
> > + return_unused_buffers(cru, VB2_BUF_STATE_QUEUED);
> > + dev_err(cru->dev, "Failed to allocate scratch buffer\n");
> > + return -ENOMEM;
> > + }
> > +
> > + cru->sequence = 0;
> > +
> > + ret = rzg2l_cru_set_stream(cru, 1);
> > + if (ret) {
> > + return_unused_buffers(cru, VB2_BUF_STATE_QUEUED);
> > + goto out;
> > + }
> > +
> > + cru->state = RZG2L_CRU_DMA_STARTING;
> > +
> > + dev_dbg(cru->dev, "Starting to capture\n");
> > +
> > +out:
> > + if (ret)
> > + dma_free_coherent(cru->dev, cru->format.sizeimage, cru->scratch,
> > + cru->scratch_phys);
> > +
> > + return ret;
> > +}
> > +
> > +static void rzg2l_cru_stop_streaming_vq(struct vb2_queue *vq)
> > +{
> > + struct rzg2l_cru_dev *cru = vb2_get_drv_priv(vq);
> > +
> > + rzg2l_cru_stop_streaming(cru);
> > +
> > + /* Free scratch buffer */
> > + dma_free_coherent(cru->dev, cru->format.sizeimage, cru->scratch,
> > + cru->scratch_phys);
> > +
> > + return_unused_buffers(cru, VB2_BUF_STATE_ERROR);
> > +}
> > +
> > +static const struct vb2_ops rzg2l_cru_qops = {
> > + .queue_setup = rzg2l_cru_queue_setup,
> > + .buf_prepare = rzg2l_cru_buffer_prepare,
> > + .buf_queue = rzg2l_cru_buffer_queue,
> > + .start_streaming = rzg2l_cru_start_streaming_vq,
> > + .stop_streaming = rzg2l_cru_stop_streaming_vq,
> > + .wait_prepare = vb2_ops_wait_prepare,
> > + .wait_finish = vb2_ops_wait_finish,
> > +};
> > +
> > +static irqreturn_t rzg2l_cru_irq(int irq, void *data)
> > +{
> > + struct rzg2l_cru_dev *cru = data;
> > + unsigned int handled = 0;
> > + unsigned long flags;
> > + u32 irq_status;
> > + u32 amnmbs;
> > + int slot;
> > +
> > + spin_lock_irqsave(&cru->qlock, flags);
> > +
> > + irq_status = rzg2l_cru_read(cru, CRUnINTS);
> > + if (!irq_status)
> > + goto done;
> > +
> > + handled = 1;
> > +
> > + rzg2l_cru_write(cru, CRUnINTS, rzg2l_cru_read(cru, CRUnINTS));
> > +
> > + /* Nothing to do if capture status is 'RZG2L_CRU_DMA_STOPPED' */
> > + if (cru->state == RZG2L_CRU_DMA_STOPPED) {
> > + dev_dbg(cru->dev, "IRQ while state stopped\n");
> > + goto done;
> > + }
> > +
> > + /* Increase stop retries if capture status is 'RZG2L_CRU_DMA_STOPPING' */
> > + if (cru->state == RZG2L_CRU_DMA_STOPPING) {
> > + if (irq_status & CRUnINTS_SFS)
> > + dev_dbg(cru->dev, "IRQ while state stopping\n");
> > + goto done;
> > + }
> > +
> > + /* Prepare for capture and update state */
> > + amnmbs = rzg2l_cru_read(cru, AMnMBS);
> > + slot = amnmbs & AMnMBS_MBSTS;
> > +
> > + /*
> > + * AMnMBS.MBSTS indicates the destination of Memory Bank (MB).
> > + * Recalculate to get the current transfer complete MB.
> > + */
> > + if (slot == 0)
> > + slot = cru->num_buf - 1;
> > + else
> > + slot--;
> > +
> > + /*
> > + * To hand buffers back in a known order to userspace start
> > + * to capture first from slot 0.
> > + */
> > + if (cru->state == RZG2L_CRU_DMA_STARTING) {
> > + if (slot != 0) {
> > + dev_dbg(cru->dev, "Starting sync slot: %d\n", slot);
> > + goto done;
> > + }
> > +
> > + dev_dbg(cru->dev, "Capture start synced!\n");
> > + cru->state = RZG2L_CRU_DMA_RUNNING;
> > + }
> > +
> > + /* Capture frame */
> > + if (cru->queue_buf[slot]) {
> > + cru->queue_buf[slot]->field = cru->format.field;
> > + cru->queue_buf[slot]->sequence = cru->sequence;
> > + cru->queue_buf[slot]->vb2_buf.timestamp = ktime_get_ns();
> > + vb2_buffer_done(&cru->queue_buf[slot]->vb2_buf,
> > + VB2_BUF_STATE_DONE);
> > + cru->queue_buf[slot] = NULL;
> > + } else {
> > + /* Scratch buffer was used, dropping frame. */
> > + dev_dbg(cru->dev, "Dropping frame %u\n", cru->sequence);
> > + }
> > +
> > + cru->sequence++;
> > +
> > + /* Prepare for next frame */
> > + rzg2l_cru_fill_hw_slot(cru, slot);
> > +
> > +done:
> > + spin_unlock_irqrestore(&cru->qlock, flags);
> > +
> > + return IRQ_RETVAL(handled);
> > +}
> > +
> > +void rzg2l_cru_dma_unregister(struct rzg2l_cru_dev *cru)
> > +{
> > + mutex_destroy(&cru->lock);
> > +
> > + v4l2_device_unregister(&cru->v4l2_dev);
> > + reset_control_assert(cru->presetn);
> > +}
> > +
> > +int rzg2l_cru_dma_register(struct rzg2l_cru_dev *cru, int irq)
> > +{
> > + struct vb2_queue *q = &cru->queue;
> > + unsigned int i;
> > + int ret;
> > +
> > + ret = reset_control_deassert(cru->presetn);
> > + if (ret) {
> > + dev_err(cru->dev, "failed to deassert presetn\n");
> > + return ret;
> > + }
> > +
> > + /* Initialize the top-level structure */
> > + ret = v4l2_device_register(cru->dev, &cru->v4l2_dev);
> > + if (ret)
> > + return ret;
> > +
> > + mutex_init(&cru->lock);
> > + INIT_LIST_HEAD(&cru->buf_list);
> > +
> > + spin_lock_init(&cru->qlock);
> > +
> > + cru->state = RZG2L_CRU_DMA_STOPPED;
> > +
> > + for (i = 0; i < HW_BUFFER_MAX; i++)
> > + cru->queue_buf[i] = NULL;
> > +
> > + /* buffer queue */
> > + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> > + q->io_modes = VB2_MMAP | VB2_READ | VB2_DMABUF;
> > + q->lock = &cru->lock;
> > + q->drv_priv = cru;
> > + q->buf_struct_size = sizeof(struct rzg2l_cru_buffer);
> > + q->ops = &rzg2l_cru_qops;
> > + q->mem_ops = &vb2_dma_contig_memops;
> > + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
> > + q->min_buffers_needed = 4;
> > + q->dev = cru->dev;
> > +
> > + ret = vb2_queue_init(q);
> > + if (ret < 0) {
> > + dev_err(cru->dev, "failed to initialize VB2 queue\n");
> > + goto error;
> > + }
> > +
> > + /* IRQ */
> > + ret = devm_request_irq(cru->dev, irq, rzg2l_cru_irq, IRQF_SHARED,
> > + KBUILD_MODNAME, cru);
> > + if (ret) {
> > + dev_err(cru->dev, "failed to request irq\n");
> > + goto error;
> > + }
> > +
> > + return 0;
> > +
> > +error:
> > + rzg2l_cru_dma_unregister(cru);
> > + return ret;
> > +}
> > diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c
> > new file mode 100644
> > index 000000000000..b1b1bfda7eb1
> > --- /dev/null
> > +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-v4l2.c
> > @@ -0,0 +1,360 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Driver for Renesas RZ/G2L CRU
> > + *
> > + * Copyright (C) 2022 Renesas Electronics Corp.
> > + *
> > + * Based on Renesas R-Car VIN
> > + * Copyright (C) 2016 Renesas Electronics Corp.
> > + * Copyright (C) 2011-2013 Renesas Solutions Corp.
> > + * Copyright (C) 2013 Cogent Embedded, Inc., <source@cogentembedded.com>
> > + * Copyright (C) 2008 Magnus Damm
> > + */
> > +
> > +#include <linux/pm_runtime.h>
> > +
> > +#include <media/v4l2-event.h>
> > +#include <media/v4l2-ioctl.h>
> > +#include <media/v4l2-mc.h>
> > +#include <media/v4l2-rect.h>
> > +
> > +#include "rzg2l-cru.h"
> > +
> > +#define RZG2L_CRU_DEFAULT_FORMAT V4L2_PIX_FMT_UYVY
> > +#define RZG2L_CRU_DEFAULT_WIDTH 800
> > +#define RZG2L_CRU_DEFAULT_HEIGHT 600
> > +#define RZG2L_CRU_DEFAULT_FIELD V4L2_FIELD_NONE
> > +#define RZG2L_CRU_DEFAULT_COLORSPACE V4L2_COLORSPACE_SRGB
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Format Conversions
> > + */
> > +
> > +static const struct v4l2_format_info rzg2l_cru_formats[] = {
> > + {
> > + .format = V4L2_PIX_FMT_UYVY,
> > + .bpp[0] = 2,
> > + },
> > +};
> > +
> > +const struct v4l2_format_info *rzg2l_cru_format_from_pixel(u32 format)
> > +{
> > + unsigned int i;
> > +
> > + for (i = 0; i < ARRAY_SIZE(rzg2l_cru_formats); i++)
> > + if (rzg2l_cru_formats[i].format == format)
> > + return rzg2l_cru_formats + i;
> > +
> > + return NULL;
> > +}
> > +
> > +static u32 rzg2l_cru_format_bytesperline(struct v4l2_pix_format *pix)
> > +{
> > + const struct v4l2_format_info *fmt;
> > +
> > + fmt = rzg2l_cru_format_from_pixel(pix->pixelformat);
> > +
> > + if (WARN_ON(!fmt))
> > + return -EINVAL;
> > +
> > + return pix->width * fmt->bpp[0];
> > +}
> > +
> > +static u32 rzg2l_cru_format_sizeimage(struct v4l2_pix_format *pix)
> > +{
> > + return pix->bytesperline * pix->height;
> > +}
> > +
> > +static void rzg2l_cru_format_align(struct rzg2l_cru_dev *cru,
> > + struct v4l2_pix_format *pix)
> > +{
> > + if (!rzg2l_cru_format_from_pixel(pix->pixelformat))
> > + pix->pixelformat = RZG2L_CRU_DEFAULT_FORMAT;
> > +
> > + switch (pix->field) {
> > + case V4L2_FIELD_TOP:
> > + case V4L2_FIELD_BOTTOM:
> > + case V4L2_FIELD_NONE:
> > + case V4L2_FIELD_INTERLACED_TB:
> > + case V4L2_FIELD_INTERLACED_BT:
> > + case V4L2_FIELD_INTERLACED:
> > + break;
> > + default:
> > + pix->field = RZG2L_CRU_DEFAULT_FIELD;
> > + break;
> > + }
> > +
> > + /* Limit to CRU capabilities */
> > + v4l_bound_align_image(&pix->width, 320, cru->info->max_width, 1,
> > + &pix->height, 240, cru->info->max_height, 2, 0);
> > +
> > + pix->bytesperline = rzg2l_cru_format_bytesperline(pix);
> > + pix->sizeimage = rzg2l_cru_format_sizeimage(pix);
> > +
> > + dev_dbg(cru->dev, "Format %ux%u bpl: %u size: %u\n",
> > + pix->width, pix->height, pix->bytesperline, pix->sizeimage);
> > +}
> > +
> > +static void rzg2l_cru_try_format(struct rzg2l_cru_dev *cru,
> > + struct v4l2_pix_format *pix)
> > +{
> > + /*
> > + * The V4L2 specification clearly documents the colorspace fields
> > + * as being set by drivers for capture devices. Using the values
> > + * supplied by userspace thus wouldn't comply with the API. Until
> > + * the API is updated force fixed values.
> > + */
> > + pix->colorspace = RZG2L_CRU_DEFAULT_COLORSPACE;
> > + pix->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix->colorspace);
> > + pix->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(pix->colorspace);
> > + pix->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true, pix->colorspace,
> > + pix->ycbcr_enc);
> > +
> > + rzg2l_cru_format_align(cru, pix);
> > +}
> > +
> > +static int rzg2l_cru_querycap(struct file *file, void *priv,
> > + struct v4l2_capability *cap)
> > +{
> > + struct rzg2l_cru_dev *cru = video_drvdata(file);
> > +
> > + strscpy(cap->driver, KBUILD_MODNAME, sizeof(cap->driver));
> > + strscpy(cap->card, "RZG2L_CRU", sizeof(cap->card));
> > + snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
> > + dev_name(cru->dev));
> > + return 0;
> > +}
> > +
> > +static int rzg2l_cru_try_fmt_vid_cap(struct file *file, void *priv,
> > + struct v4l2_format *f)
> > +{
> > + struct rzg2l_cru_dev *cru = video_drvdata(file);
> > +
> > + rzg2l_cru_try_format(cru, &f->fmt.pix);
> > +
> > + return 0;
> > +}
> > +
> > +static int rzg2l_cru_s_fmt_vid_cap(struct file *file, void *priv,
> > + struct v4l2_format *f)
> > +{
> > + struct rzg2l_cru_dev *cru = video_drvdata(file);
> > +
> > + if (vb2_is_busy(&cru->queue))
> > + return -EBUSY;
> > +
> > + rzg2l_cru_try_format(cru, &f->fmt.pix);
> > +
> > + cru->format = f->fmt.pix;
> > +
> > + cru->compose.top = 0;
> > + cru->compose.left = 0;
> > + cru->compose.width = cru->format.width;
> > + cru->compose.height = cru->format.height;
> > +
> > + return 0;
> > +}
> > +
> > +static int rzg2l_cru_g_fmt_vid_cap(struct file *file, void *priv,
> > + struct v4l2_format *f)
> > +{
> > + struct rzg2l_cru_dev *cru = video_drvdata(file);
> > +
> > + f->fmt.pix = cru->format;
> > +
> > + return 0;
> > +}
> > +
> > +static int rzg2l_cru_enum_fmt_vid_cap(struct file *file, void *priv,
> > + struct v4l2_fmtdesc *f)
> > +{
> > + if (f->index >= ARRAY_SIZE(rzg2l_cru_formats))
> > + return -EINVAL;
> > +
> > + f->pixelformat = rzg2l_cru_formats[f->index].format;
> > +
> > + return 0;
> > +}
> > +
> > +static int rzg2l_cru_subscribe_event(struct v4l2_fh *fh,
> > + const struct v4l2_event_subscription *sub)
> > +{
> > + switch (sub->type) {
> > + case V4L2_EVENT_SOURCE_CHANGE:
> > + return v4l2_event_subscribe(fh, sub, 4, NULL);
> > + }
> > + return v4l2_ctrl_subscribe_event(fh, sub);
> > +}
> > +
> > +static const struct v4l2_ioctl_ops rzg2l_cru_ioctl_ops = {
> > + .vidioc_querycap = rzg2l_cru_querycap,
> > + .vidioc_try_fmt_vid_cap = rzg2l_cru_try_fmt_vid_cap,
> > + .vidioc_g_fmt_vid_cap = rzg2l_cru_g_fmt_vid_cap,
> > + .vidioc_s_fmt_vid_cap = rzg2l_cru_s_fmt_vid_cap,
> > + .vidioc_enum_fmt_vid_cap = rzg2l_cru_enum_fmt_vid_cap,
> > +
> > + .vidioc_reqbufs = vb2_ioctl_reqbufs,
> > + .vidioc_create_bufs = vb2_ioctl_create_bufs,
> > + .vidioc_querybuf = vb2_ioctl_querybuf,
> > + .vidioc_qbuf = vb2_ioctl_qbuf,
> > + .vidioc_dqbuf = vb2_ioctl_dqbuf,
> > + .vidioc_expbuf = vb2_ioctl_expbuf,
> > + .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
> > + .vidioc_streamon = vb2_ioctl_streamon,
> > + .vidioc_streamoff = vb2_ioctl_streamoff,
> > +
> > + .vidioc_log_status = v4l2_ctrl_log_status,
> > + .vidioc_subscribe_event = rzg2l_cru_subscribe_event,
> > + .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
> > +};
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Media controller file operations
> > + */
> > +
> > +static int rzg2l_cru_open(struct file *file)
> > +{
> > + struct rzg2l_cru_dev *cru = video_drvdata(file);
> > + int ret;
> > +
> > + ret = pm_runtime_resume_and_get(cru->dev);
> > + if (ret < 0)
> > + return ret;
> > +
> > + ret = mutex_lock_interruptible(&cru->lock);
> > + if (ret)
> > + goto err_pm;
> > +
> > + file->private_data = cru;
> > + ret = v4l2_fh_open(file);
> > + if (ret)
> > + goto err_unlock;
> > +
> > + ret = v4l2_pipeline_pm_get(&cru->vdev.entity);
> > + if (ret < 0)
> > + goto err_open;
> > +
> > + ret = v4l2_ctrl_handler_setup(&cru->ctrl_handler);
> > + if (ret)
> > + goto err_power;
> > +
> > + mutex_unlock(&cru->lock);
> > +
> > + return 0;
> > +err_power:
> > + v4l2_pipeline_pm_put(&cru->vdev.entity);
> > +err_open:
> > + v4l2_fh_release(file);
> > +err_unlock:
> > + mutex_unlock(&cru->lock);
> > +err_pm:
> > + pm_runtime_put(cru->dev);
> > +
> > + return ret;
> > +}
> > +
> > +static int rzg2l_cru_release(struct file *file)
> > +{
> > + struct rzg2l_cru_dev *cru = video_drvdata(file);
> > + int ret;
> > +
> > + mutex_lock(&cru->lock);
> > +
> > + /* the release helper will cleanup any on-going streaming. */
> > + ret = _vb2_fop_release(file, NULL);
> > +
> > + v4l2_pipeline_pm_put(&cru->vdev.entity);
> > + pm_runtime_put(cru->dev);
> > +
> > + mutex_unlock(&cru->lock);
> > +
> > + return ret;
> > +}
> > +
> > +static const struct v4l2_file_operations rzg2l_cru_fops = {
> > + .owner = THIS_MODULE,
> > + .unlocked_ioctl = video_ioctl2,
> > + .open = rzg2l_cru_open,
> > + .release = rzg2l_cru_release,
> > + .poll = vb2_fop_poll,
> > + .mmap = vb2_fop_mmap,
> > + .read = vb2_fop_read,
> > +};
> > +
> > +void rzg2l_cru_v4l2_unregister(struct rzg2l_cru_dev *cru)
> > +{
> > + if (!video_is_registered(&cru->vdev))
> > + return;
> > +
> > + v4l2_info(&cru->v4l2_dev, "Removed %s\n",
> > + video_device_node_name(&cru->vdev));
> > +
> > + /* Checks internally if vdev have been init or not */
> > + video_unregister_device(&cru->vdev);
> > +}
> > +
> > +static void rzg2l_cru_notify(struct v4l2_subdev *sd,
> > + unsigned int notification, void *arg)
> > +{
> > + struct rzg2l_cru_dev *cru =
> > + container_of(sd->v4l2_dev, struct rzg2l_cru_dev, v4l2_dev);
> > + struct v4l2_subdev *remote;
> > + struct media_pad *pad;
> > +
> > + pad = media_entity_remote_pad(&cru->pad);
> > + if (!pad)
> > + return;
> > +
> > + remote = media_entity_to_v4l2_subdev(pad->entity);
> > + if (remote != sd)
> > + return;
> > +
> > + switch (notification) {
> > + case V4L2_DEVICE_NOTIFY_EVENT:
> > + v4l2_event_queue(&cru->vdev, arg);
> > + break;
> > + }
> > +}
> > +
> > +int rzg2l_cru_v4l2_register(struct rzg2l_cru_dev *cru)
> > +{
> > + struct video_device *vdev = &cru->vdev;
> > + int ret;
> > +
> > + cru->v4l2_dev.notify = rzg2l_cru_notify;
> > +
> > + /* video node */
> > + vdev->v4l2_dev = &cru->v4l2_dev;
> > + vdev->queue = &cru->queue;
> > + snprintf(vdev->name, sizeof(vdev->name), "CRU output");
> > + vdev->release = video_device_release_empty;
> > + vdev->lock = &cru->lock;
> > + vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
> > + V4L2_CAP_READWRITE;
> > +
> > + /* Set a default format */
> > + cru->format.pixelformat = RZG2L_CRU_DEFAULT_FORMAT;
> > + cru->format.width = RZG2L_CRU_DEFAULT_WIDTH;
> > + cru->format.height = RZG2L_CRU_DEFAULT_HEIGHT;
> > + cru->format.field = RZG2L_CRU_DEFAULT_FIELD;
> > + cru->format.colorspace = RZG2L_CRU_DEFAULT_COLORSPACE;
> > +
> > + vdev->device_caps |= V4L2_CAP_IO_MC;
> > + vdev->fops = &rzg2l_cru_fops;
> > + vdev->ioctl_ops = &rzg2l_cru_ioctl_ops;
> > +
> > + rzg2l_cru_format_align(cru, &cru->format);
> > +
> > + ret = video_register_device(&cru->vdev, VFL_TYPE_VIDEO, -1);
> > + if (ret) {
> > + dev_err(cru->dev, "Failed to register video device\n");
> > + return ret;
> > + }
> > +
> > + video_set_drvdata(&cru->vdev, cru);
> > +
> > + v4l2_info(&cru->v4l2_dev, "Device registered as %s\n",
> > + video_device_node_name(&cru->vdev));
> > +
> > + return ret;
> > +}
> > --
> > 2.17.1
> >
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [RFC PATCH v2 2/4] media: dt-bindings: media: Document RZ/G2L CRU
2022-02-15 13:06 ` Jacopo Mondi
@ 2022-03-22 0:13 ` Lad, Prabhakar
0 siblings, 0 replies; 17+ messages in thread
From: Lad, Prabhakar @ 2022-03-22 0:13 UTC (permalink / raw)
To: Jacopo Mondi
Cc: Lad Prabhakar, Niklas Söderlund, Philipp Zabel,
Mauro Carvalho Chehab, Rob Herring, Laurent Pinchart,
Sakari Ailus, Hans Verkuil, Geert Uytterhoeven, linux-media,
Linux-Renesas,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, LKML,
Biju Das
Hi Jacopo,
Thank you for the review.
On Tue, Feb 15, 2022 at 1:05 PM Jacopo Mondi <jacopo@jmondi.org> wrote:
>
> Hi Prabhakar,
>
> On Fri, Jan 21, 2022 at 01:05:41AM +0000, Lad Prabhakar wrote:
> > Document the CRU block found on Renesas RZ/G2L SoC's.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > v1->v2
> > * Dropped CSI
> > ---
> > .../bindings/media/renesas,rzg2l-cru.yaml | 152 ++++++++++++++++++
> > 1 file changed, 152 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> > new file mode 100644
> > index 000000000000..a03fc6ef0117
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> > @@ -0,0 +1,152 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +# Copyright (C) 2022 Renesas Electronics Corp.
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Renesas RZ/G2L Camera Data Receiving Unit (CRU)
> > +
> > +maintainers:
> > + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > +
> > +description:
> > + The RZ/G2L Camera Data Receiving Unit (CRU) device provides video input
> > + capabilities for the Renesas RZ/G2L family of devices.
> > +
> > + Depending on the instance the Image Processing input is connected to
> > + external SoC pins or to a CSI-2 receiver.
> > +
> > +properties:
> > + compatible:
> > + oneOf:
> > + - items:
> > + - enum:
> > + - renesas,r9a07g044-cru # RZ/G2{L,LC}
> > + - const: renesas,rzg2l-cru
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 3
> > +
> > + interrupt-names:
> > + items:
> > + - const: image_conv
> > + - const: image_conv_err
> > + - const: axi_mst_err
> > +
> > + clocks:
> > + items:
> > + - description: CRU Main clock
> > + - description: CPU Register access clock
> > + - description: CRU image transfer clock
> > +
> > + clock-names:
> > + items:
> > + - const: vclk
> > + - const: pclk
> > + - const: aclk
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > + resets:
> > + items:
> > + - description: CRU_PRESETN reset terminal
> > + - description: CRU_ARESETN reset terminal
> > +
> > + reset-names:
> > + items:
> > + - const: presetn
> > + - const: aresetn
> > +
> > + ports:
> > + $ref: /schemas/graph.yaml#/properties/ports
> > +
> > + properties:
> > + port@0:
> > + $ref: /schemas/graph.yaml#/$defs/port-base
> > + unevaluatedProperties: false
> > + description:
> > + Input port node, single endpoint describing a parallel input source.
> > +
> > + properties:
> > + endpoint:
> > + $ref: video-interfaces.yaml#
> > + unevaluatedProperties: false
> > +
> > + properties:
> > + hsync-active: true
> > + vsync-active: true
> > + bus-width: true
> > + data-shift: true
> > +
> > + port@1:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description:
> > + Output port node, describing the RZ/G2L Image Processing module
> > + connected the CSI-2 receiver
>
> Isn't this the port dedicated to the CSI-2 receiver input ?
>
Agreed.
> > +
> > + properties:
> > + endpoint@0:
> > + $ref: /schemas/graph.yaml#/properties/endpoint
> > + description: Endpoint connected to CSI2.
>
> And the andpoint should describe the connection between the CRU and
> the CSI-2 receiver ? (ie it should not contain CSI-2 specific
> properties, as those are specified by the CSI-2 receiver device node?)
>
Ok will drop the properties.
Cheers,
Prabhakar
> Thanks
> j
> > +
> > + anyOf:
> > + - required:
> > + - endpoint@0
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - interrupt-names
> > + - clocks
> > + - clock-names
> > + - resets
> > + - reset-names
> > + - power-domains
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + # Device node example with CSI-2
> > + - |
> > + #include <dt-bindings/clock/r9a07g044-cpg.h>
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > + cru: video@10830000 {
> > + compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";
> > + reg = <0x10830000 0x400>;
> > + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
> > + clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
> > + <&cpg CPG_MOD R9A07G044_CRU_PCLK>,
> > + <&cpg CPG_MOD R9A07G044_CRU_ACLK>;
> > + clock-names = "vclk", "pclk", "aclk";
> > + power-domains = <&cpg>;
> > + resets = <&cpg R9A07G044_CRU_PRESETN>,
> > + <&cpg R9A07G044_CRU_ARESETN>;
> > + reset-names = "presetn", "aresetn";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@1 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + reg = <1>;
> > +
> > + crucsi2: endpoint@0 {
> > + reg = <0>;
> > + remote-endpoint= <&csi2cru>;
> > + };
> > + };
> > + };
> > + };
> > --
> > 2.17.1
> >
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2022-03-22 0:16 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-21 1:05 [RFC PATCH v2 0/4] Add driver for Renesas RZ/G2L CRU module Lad Prabhakar
2022-01-21 1:05 ` [RFC PATCH v2 1/4] media: dt-bindings: media: Document RZ/G2L CSI-2 block Lad Prabhakar
2022-01-21 9:26 ` Geert Uytterhoeven
2022-01-21 11:52 ` Lad, Prabhakar
2022-01-21 12:06 ` Geert Uytterhoeven
2022-02-15 13:01 ` Jacopo Mondi
2022-03-18 16:58 ` Lad, Prabhakar
2022-01-21 1:05 ` [RFC PATCH v2 2/4] media: dt-bindings: media: Document RZ/G2L CRU Lad Prabhakar
2022-02-07 22:39 ` Rob Herring
2022-03-18 20:39 ` Lad, Prabhakar
2022-02-15 13:06 ` Jacopo Mondi
2022-03-22 0:13 ` Lad, Prabhakar
2022-01-21 1:05 ` [RFC PATCH v2 3/4] media: platform: Add CRU driver for RZ/G2L SoC Lad Prabhakar
2022-02-15 14:40 ` Jacopo Mondi
2022-02-15 15:45 ` Niklas Söderlund
2022-03-22 0:08 ` Lad, Prabhakar
2022-01-21 1:05 ` [RFC PATCH v2 4/4] media: platform: Add Renesas RZ/G2L MIPI CSI-2 receiver driver Lad Prabhakar
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.