All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org, Bart Van Assche <bvanassche@acm.org>,
	"James E.J. Bottomley" <jejb@linux.ibm.com>
Subject: [PATCH 17/44] fdomain: Move the SCSI pointer to private command data
Date: Fri, 28 Jan 2022 14:18:42 -0800	[thread overview]
Message-ID: <20220128221909.8141-18-bvanassche@acm.org> (raw)
In-Reply-To: <20220128221909.8141-1-bvanassche@acm.org>

Set .cmd_size in the SCSI host template instead of using the SCSI pointer
from struct scsi_cmnd. This patch prepares for removal of the SCSI pointer
from struct scsi_cmnd.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/fdomain.c | 70 +++++++++++++++++++++++++-----------------
 1 file changed, 42 insertions(+), 28 deletions(-)

diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c
index 9159b4057c5d..e24c1baf2d2a 100644
--- a/drivers/scsi/fdomain.c
+++ b/drivers/scsi/fdomain.c
@@ -115,6 +115,17 @@ struct fdomain {
 	struct work_struct work;
 };
 
+struct fdomain_priv {
+	struct scsi_pointer scsi_pointer;
+};
+
+static struct scsi_pointer *fdomain_scsi_pointer(struct scsi_cmnd *cmd)
+{
+	struct fdomain_priv *fcmd = scsi_cmd_priv(cmd);
+
+	return &fcmd->scsi_pointer;
+}
+
 static inline void fdomain_make_bus_idle(struct fdomain *fd)
 {
 	outb(0, fd->base + REG_BCTL);
@@ -263,20 +274,21 @@ static void fdomain_work(struct work_struct *work)
 	struct Scsi_Host *sh = container_of((void *)fd, struct Scsi_Host,
 					    hostdata);
 	struct scsi_cmnd *cmd = fd->cur_cmd;
+	struct scsi_pointer *scsi_pointer = fdomain_scsi_pointer(cmd);
 	unsigned long flags;
 	int status;
 	int done = 0;
 
 	spin_lock_irqsave(sh->host_lock, flags);
 
-	if (cmd->SCp.phase & in_arbitration) {
+	if (scsi_pointer->phase & in_arbitration) {
 		status = inb(fd->base + REG_ASTAT);
 		if (!(status & ASTAT_ARB)) {
 			set_host_byte(cmd, DID_BUS_BUSY);
 			fdomain_finish_cmd(fd);
 			goto out;
 		}
-		cmd->SCp.phase = in_selection;
+		scsi_pointer->phase = in_selection;
 
 		outb(ICTL_SEL | FIFO_COUNT, fd->base + REG_ICTL);
 		outb(BCTL_BUSEN | BCTL_SEL, fd->base + REG_BCTL);
@@ -285,7 +297,7 @@ static void fdomain_work(struct work_struct *work)
 		/* Stop arbitration and enable parity */
 		outb(ACTL_IRQEN | PARITY_MASK, fd->base + REG_ACTL);
 		goto out;
-	} else if (cmd->SCp.phase & in_selection) {
+	} else if (scsi_pointer->phase & in_selection) {
 		status = inb(fd->base + REG_BSTAT);
 		if (!(status & BSTAT_BSY)) {
 			/* Try again, for slow devices */
@@ -297,75 +309,75 @@ static void fdomain_work(struct work_struct *work)
 			/* Stop arbitration and enable parity */
 			outb(ACTL_IRQEN | PARITY_MASK, fd->base + REG_ACTL);
 		}
-		cmd->SCp.phase = in_other;
+		scsi_pointer->phase = in_other;
 		outb(ICTL_FIFO | ICTL_REQ | FIFO_COUNT, fd->base + REG_ICTL);
 		outb(BCTL_BUSEN, fd->base + REG_BCTL);
 		goto out;
 	}
 
-	/* cur_cmd->SCp.phase == in_other: this is the body of the routine */
+	/* fdomain_scsi_pointer(cur_cmd)->phase == in_other: this is the body of the routine */
 	status = inb(fd->base + REG_BSTAT);
 
 	if (status & BSTAT_REQ) {
 		switch (status & (BSTAT_MSG | BSTAT_CMD | BSTAT_IO)) {
 		case BSTAT_CMD:	/* COMMAND OUT */
-			outb(cmd->cmnd[cmd->SCp.sent_command++],
+			outb(cmd->cmnd[scsi_pointer->sent_command++],
 			     fd->base + REG_SCSI_DATA);
 			break;
 		case 0:	/* DATA OUT -- tmc18c50/tmc18c30 only */
-			if (fd->chip != tmc1800 && !cmd->SCp.have_data_in) {
-				cmd->SCp.have_data_in = -1;
+			if (fd->chip != tmc1800 && !scsi_pointer->have_data_in) {
+				scsi_pointer->have_data_in = -1;
 				outb(ACTL_IRQEN | ACTL_FIFOWR | ACTL_FIFOEN |
 				     PARITY_MASK, fd->base + REG_ACTL);
 			}
 			break;
 		case BSTAT_IO:	/* DATA IN -- tmc18c50/tmc18c30 only */
-			if (fd->chip != tmc1800 && !cmd->SCp.have_data_in) {
-				cmd->SCp.have_data_in = 1;
+			if (fd->chip != tmc1800 && !scsi_pointer->have_data_in) {
+				scsi_pointer->have_data_in = 1;
 				outb(ACTL_IRQEN | ACTL_FIFOEN | PARITY_MASK,
 				     fd->base + REG_ACTL);
 			}
 			break;
 		case BSTAT_CMD | BSTAT_IO:	/* STATUS IN */
-			cmd->SCp.Status = inb(fd->base + REG_SCSI_DATA);
+			scsi_pointer->Status = inb(fd->base + REG_SCSI_DATA);
 			break;
 		case BSTAT_MSG | BSTAT_CMD:	/* MESSAGE OUT */
 			outb(MESSAGE_REJECT, fd->base + REG_SCSI_DATA);
 			break;
 		case BSTAT_MSG | BSTAT_CMD | BSTAT_IO:	/* MESSAGE IN */
-			cmd->SCp.Message = inb(fd->base + REG_SCSI_DATA);
-			if (cmd->SCp.Message == COMMAND_COMPLETE)
+			scsi_pointer->Message = inb(fd->base + REG_SCSI_DATA);
+			if (scsi_pointer->Message == COMMAND_COMPLETE)
 				++done;
 			break;
 		}
 	}
 
-	if (fd->chip == tmc1800 && !cmd->SCp.have_data_in &&
-	    cmd->SCp.sent_command >= cmd->cmd_len) {
+	if (fd->chip == tmc1800 && !scsi_pointer->have_data_in &&
+	    scsi_pointer->sent_command >= cmd->cmd_len) {
 		if (cmd->sc_data_direction == DMA_TO_DEVICE) {
-			cmd->SCp.have_data_in = -1;
+			scsi_pointer->have_data_in = -1;
 			outb(ACTL_IRQEN | ACTL_FIFOWR | ACTL_FIFOEN |
 			     PARITY_MASK, fd->base + REG_ACTL);
 		} else {
-			cmd->SCp.have_data_in = 1;
+			scsi_pointer->have_data_in = 1;
 			outb(ACTL_IRQEN | ACTL_FIFOEN | PARITY_MASK,
 			     fd->base + REG_ACTL);
 		}
 	}
 
-	if (cmd->SCp.have_data_in == -1) /* DATA OUT */
+	if (scsi_pointer->have_data_in == -1) /* DATA OUT */
 		fdomain_write_data(cmd);
 
-	if (cmd->SCp.have_data_in == 1) /* DATA IN */
+	if (scsi_pointer->have_data_in == 1) /* DATA IN */
 		fdomain_read_data(cmd);
 
 	if (done) {
-		set_status_byte(cmd, cmd->SCp.Status);
+		set_status_byte(cmd, scsi_pointer->Status);
 		set_host_byte(cmd, DID_OK);
-		scsi_msg_to_host_byte(cmd, cmd->SCp.Message);
+		scsi_msg_to_host_byte(cmd, scsi_pointer->Message);
 		fdomain_finish_cmd(fd);
 	} else {
-		if (cmd->SCp.phase & disconnect) {
+		if (scsi_pointer->phase & disconnect) {
 			outb(ICTL_FIFO | ICTL_SEL | ICTL_REQ | FIFO_COUNT,
 			     fd->base + REG_ICTL);
 			outb(0, fd->base + REG_BCTL);
@@ -398,14 +410,15 @@ static irqreturn_t fdomain_irq(int irq, void *dev_id)
 
 static int fdomain_queue(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
 {
+	struct scsi_pointer *scsi_pointer = fdomain_scsi_pointer(cmd);
 	struct fdomain *fd = shost_priv(cmd->device->host);
 	unsigned long flags;
 
-	cmd->SCp.Status		= 0;
-	cmd->SCp.Message	= 0;
-	cmd->SCp.have_data_in	= 0;
-	cmd->SCp.sent_command	= 0;
-	cmd->SCp.phase		= in_arbitration;
+	scsi_pointer->Status		= 0;
+	scsi_pointer->Message		= 0;
+	scsi_pointer->have_data_in	= 0;
+	scsi_pointer->sent_command	= 0;
+	scsi_pointer->phase		= in_arbitration;
 	scsi_set_resid(cmd, scsi_bufflen(cmd));
 
 	spin_lock_irqsave(sh->host_lock, flags);
@@ -440,7 +453,7 @@ static int fdomain_abort(struct scsi_cmnd *cmd)
 	spin_lock_irqsave(sh->host_lock, flags);
 
 	fdomain_make_bus_idle(fd);
-	fd->cur_cmd->SCp.phase |= aborted;
+	fdomain_scsi_pointer(fd->cur_cmd)->phase |= aborted;
 
 	/* Aborts are not done well. . . */
 	set_host_byte(fd->cur_cmd, DID_ABORT);
@@ -501,6 +514,7 @@ static struct scsi_host_template fdomain_template = {
 	.this_id		= 7,
 	.sg_tablesize		= 64,
 	.dma_boundary		= PAGE_SIZE - 1,
+	.cmd_size		= sizeof(struct fdomain_priv),
 };
 
 struct Scsi_Host *fdomain_create(int base, int irq, int this_id,

  parent reply	other threads:[~2022-01-28 22:21 UTC|newest]

Thread overview: 94+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-28 22:18 [PATCH 00/44] Remove the SCSI pointer from struct scsi_cmnd Bart Van Assche
2022-01-28 22:18 ` [PATCH 01/44] ips: Use true and false instead of TRUE and FALSE Bart Van Assche
2022-01-31  9:53   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 02/44] nsp_cs: " Bart Van Assche
2022-01-31  9:55   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 03/44] scsi: Remove drivers/scsi/scsi.h Bart Van Assche
2022-01-31 12:53   ` Greg Kroah-Hartman
2022-01-28 22:18 ` [PATCH 04/44] NCR5380: Remove the NCR5380_CMD_SIZE macro Bart Van Assche
2022-01-31  9:58   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 05/44] NCR5380: Move the SCSI pointer to private command data Bart Van Assche
2022-01-31 10:04   ` Johannes Thumshirn
2022-01-31 22:39   ` Finn Thain
2022-01-31 23:36     ` Bart Van Assche
2022-02-01  0:11       ` Finn Thain
2022-01-28 22:18 ` [PATCH 06/44] scsi: arm: Rename arm/scsi.h into arm/arm_scsi.h Bart Van Assche
2022-01-31 10:09   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 07/44] scsi: arm: Move the SCSI pointer to private command data Bart Van Assche
2022-01-28 22:18 ` [PATCH 08/44] 53c700: Stop clearing SCSI pointer fields Bart Van Assche
2022-01-31 10:15   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 09/44] aacraid: Move the SCSI pointer to private command data Bart Van Assche
2022-01-28 22:18 ` [PATCH 10/44] advansys: " Bart Van Assche
2022-01-31 10:23   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 11/44] aha1542: Remove a set-but-not-used array Bart Van Assche
2022-01-31 10:25   ` Johannes Thumshirn
2022-01-31 17:13     ` Bart Van Assche
2022-01-28 22:18 ` [PATCH 12/44] aha152x: Move the SCSI pointer to private command data Bart Van Assche
2022-01-31 10:32   ` Johannes Thumshirn
2022-01-31 17:16     ` Bart Van Assche
2022-01-28 22:18 ` [PATCH 13/44] bfa: Stop using the SCSI pointer Bart Van Assche
2022-01-31 10:39   ` Johannes Thumshirn
2022-01-31 17:19     ` Bart Van Assche
2022-02-01  9:16       ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 14/44] csio: " Bart Van Assche
2022-01-31 10:41   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 15/44] dc395x: " Bart Van Assche
2022-01-31 10:42   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 16/44] esp_scsi: " Bart Van Assche
2022-01-31 10:43   ` Johannes Thumshirn
2022-01-31 22:46   ` Finn Thain
2022-02-01 21:20     ` Bart Van Assche
2022-01-28 22:18 ` Bart Van Assche [this message]
2022-01-31 10:44   ` [PATCH 17/44] fdomain: Move the SCSI pointer to private command data Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 18/44] fnic: Fix a tracing statement Bart Van Assche
2022-01-28 22:18 ` [PATCH 19/44] fnic: Stop using the SCSI pointer Bart Van Assche
2022-01-31 11:01   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 20/44] hptiop: " Bart Van Assche
2022-01-31 11:03   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 21/44] imm: Move the SCSI pointer to private command data Bart Van Assche
2022-01-31 11:17   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 22/44] iscsi: Stop using the SCSI pointer Bart Van Assche
2022-01-28 22:18 ` [PATCH 23/44] initio: " Bart Van Assche
2022-01-31 11:19   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 24/44] libfc: " Bart Van Assche
2022-01-28 22:18 ` [PATCH 25/44] mac53c94: Fix a set-but-not-used compiler warning Bart Van Assche
2022-01-31 11:21   ` Johannes Thumshirn
2022-01-31 17:22     ` Bart Van Assche
2022-01-28 22:18 ` [PATCH 26/44] mac53c94: Move the SCSI pointer to private command data Bart Van Assche
2022-01-31 11:22   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 27/44] megaraid: Stop using the SCSI pointer Bart Van Assche
2022-01-31 11:27   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 28/44] megasas: " Bart Van Assche
2022-01-31 11:28   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 29/44] mesh: Move the SCSI pointer to private command data Bart Van Assche
2022-01-31 11:31   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 30/44] mvsas: Fix a set-but-not-used warning Bart Van Assche
2022-01-31 11:33   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 31/44] mvumi: Stop using the SCSI pointer Bart Van Assche
2022-01-31 11:34   ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 32/44] nsp32: " Bart Van Assche
2022-01-31  2:53   ` Masanori Goto
2022-01-31 17:28     ` Bart Van Assche
2022-01-28 22:18 ` [PATCH 33/44] nsp_cs: Move the SCSI pointer to private command data Bart Van Assche
2022-01-28 22:18 ` [PATCH 34/44] sym53c500_cs: " Bart Van Assche
2022-01-31 11:37   ` Johannes Thumshirn
2022-01-28 22:19 ` [PATCH 35/44] ppa: " Bart Van Assche
2022-01-31 11:38   ` Johannes Thumshirn
2022-01-28 22:19 ` [PATCH 36/44] qla1280: " Bart Van Assche
2022-01-31 11:39   ` Johannes Thumshirn
2022-01-28 22:19 ` [PATCH 37/44] qla2xxx: Stop using the SCSI pointer Bart Van Assche
2022-01-28 22:19 ` [PATCH 38/44] smartpqi: " Bart Van Assche
2022-01-31 11:41   ` Johannes Thumshirn
2022-01-28 22:19 ` [PATCH 39/44] sym53c8xx_2: Move the SCSI pointer to private command data Bart Van Assche
2022-01-31 11:42   ` Johannes Thumshirn
2022-01-28 22:19 ` [PATCH 40/44] scsi: usb: Stop using the SCSI pointer Bart Van Assche
2022-01-31 11:43   ` Johannes Thumshirn
2022-01-31 12:53   ` Greg Kroah-Hartman
2022-02-02  8:14   ` Oliver Neukum
2022-01-28 22:19 ` [PATCH 41/44] wd719x: " Bart Van Assche
2022-01-31 11:44   ` Johannes Thumshirn
2022-01-28 22:19 ` [PATCH 42/44] wdc33c93: Move the SCSI pointer to private command data Bart Van Assche
2022-01-28 22:19 ` [PATCH 43/44] zalon: Stop using the SCSI pointer Bart Van Assche
2022-01-31 11:46   ` Johannes Thumshirn
2022-01-28 22:19 ` [PATCH 44/44] scsi: core: Remove struct scsi_pointer from struct scsi_cmnd Bart Van Assche
2022-01-31 11:47   ` Johannes Thumshirn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220128221909.8141-18-bvanassche@acm.org \
    --to=bvanassche@acm.org \
    --cc=jejb@linux.ibm.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.