All of lore.kernel.org
 help / color / mirror / Atom feed
From: Helge Deller <deller@gmx.de>
To: DRI Development <dri-devel@lists.freedesktop.org>,
	linux-fbdev@vger.kernel.org,
	Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>,
	John David Anglin <dave.anglin@bell.net>
Subject: [PATCH v3 3/3] fbcon: Add option to enable legacy hardware acceleration
Date: Tue,  1 Feb 2022 19:59:54 +0100	[thread overview]
Message-ID: <20220201185954.169768-4-deller@gmx.de> (raw)
In-Reply-To: <20220201185954.169768-1-deller@gmx.de>

Add a config option CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION to
enable bitblt and fillrect hardware acceleration in the framebuffer
console. If disabled, such acceleration will not be used, even if it is
supported by the graphics hardware driver.

If you plan to use DRM as your main graphics output system, you should
disable this option since it will prevent compiling in code which isn't
used later on when DRM takes over.

For all other configurations, e.g. if none of your graphic cards support
DRM (yet), DRM isn't available for your architecture, or you can't be
sure that the graphic card in the target system will support DRM, you
most likely want to enable this option.

In the non-accelerated case (e.g. when DRM is used), the inlined
fb_scrollmode() function is hardcoded to return SCROLL_REDRAW and as such the
compiler is able to optimize much unneccesary code away.

In this v3 patch version I additionally changed the GETVYRES() and GETVXRES()
macros to take a pointer to the fbcon_display struct. This fixes the build when
console rotation is enabled and helps the compiler again to optimize out code.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Helge Deller <deller@gmx.de>
---
 drivers/video/console/Kconfig           | 11 +++++++
 drivers/video/fbdev/core/fbcon.c        | 39 ++++++++++++++++++-------
 drivers/video/fbdev/core/fbcon.h        | 15 +++++++++-
 drivers/video/fbdev/core/fbcon_ccw.c    | 10 +++----
 drivers/video/fbdev/core/fbcon_cw.c     | 10 +++----
 drivers/video/fbdev/core/fbcon_rotate.h |  4 +--
 drivers/video/fbdev/core/fbcon_ud.c     | 20 ++++++-------
 7 files changed, 75 insertions(+), 34 deletions(-)

diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 840d9813b0bc..6029fd41d7d0 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -78,6 +78,17 @@ config FRAMEBUFFER_CONSOLE
 	help
 	  Low-level framebuffer-based console driver.

+config FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION
+	bool "Framebuffer Console hardware acceleration support"
+	depends on FRAMEBUFFER_CONSOLE
+	default n if DRM
+	default y
+	help
+	  If you use a system on which DRM is fully supported you usually want to say N,
+	  otherwise you probably want to enable this option.
+	  If enabled the framebuffer console will utilize the hardware acceleration
+	  of your graphics card by using hardware bitblt and fillrect features.
+
 config FRAMEBUFFER_CONSOLE_DETECT_PRIMARY
        bool "Map the console to the primary display device"
        depends on FRAMEBUFFER_CONSOLE
diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index b813985f1403..f7b7d35953e8 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -1136,11 +1136,13 @@ static void fbcon_init(struct vc_data *vc, int init)

 	ops->graphics = 0;

+#ifdef CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION
 	if ((cap & FBINFO_HWACCEL_COPYAREA) &&
 	    !(cap & FBINFO_HWACCEL_DISABLED))
 		p->scrollmode = SCROLL_MOVE;
 	else /* default to something safe */
 		p->scrollmode = SCROLL_REDRAW;
+#endif

 	/*
 	 *  ++guenther: console.c:vc_allocate() relies on initializing
@@ -1705,7 +1707,7 @@ static bool fbcon_scroll(struct vc_data *vc, unsigned int t, unsigned int b,
 			count = vc->vc_rows;
 		if (logo_shown >= 0)
 			goto redraw_up;
-		switch (p->scrollmode) {
+		switch (fb_scrollmode(p)) {
 		case SCROLL_MOVE:
 			fbcon_redraw_blit(vc, info, p, t, b - t - count,
 				     count);
@@ -1795,7 +1797,7 @@ static bool fbcon_scroll(struct vc_data *vc, unsigned int t, unsigned int b,
 			count = vc->vc_rows;
 		if (logo_shown >= 0)
 			goto redraw_down;
-		switch (p->scrollmode) {
+		switch (fb_scrollmode(p)) {
 		case SCROLL_MOVE:
 			fbcon_redraw_blit(vc, info, p, b - 1, b - t - count,
 				     -count);
@@ -1946,12 +1948,12 @@ static void fbcon_bmove_rec(struct vc_data *vc, struct fbcon_display *p, int sy,
 		   height, width);
 }

-static void updatescrollmode(struct fbcon_display *p,
+static void updatescrollmode_accel(struct fbcon_display *p,
 					struct fb_info *info,
 					struct vc_data *vc)
 {
+#ifdef CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION
 	struct fbcon_ops *ops = info->fbcon_par;
-	int fh = vc->vc_font.height;
 	int cap = info->flags;
 	u16 t = 0;
 	int ypan = FBCON_SWAP(ops->rotate, info->fix.ypanstep,
@@ -1972,12 +1974,6 @@ static void updatescrollmode(struct fbcon_display *p,
 	int fast_imageblit = (cap & FBINFO_HWACCEL_IMAGEBLIT) &&
 		!(cap & FBINFO_HWACCEL_DISABLED);

-	p->vrows = vyres/fh;
-	if (yres > (fh * (vc->vc_rows + 1)))
-		p->vrows -= (yres - (fh * vc->vc_rows)) / fh;
-	if ((yres % fh) && (vyres % fh < yres % fh))
-		p->vrows--;
-
 	if (good_wrap || good_pan) {
 		if (reading_fast || fast_copyarea)
 			p->scrollmode = good_wrap ?
@@ -1991,6 +1987,27 @@ static void updatescrollmode(struct fbcon_display *p,
 		else
 			p->scrollmode = SCROLL_REDRAW;
 	}
+#endif
+}
+
+static void updatescrollmode(struct fbcon_display *p,
+					struct fb_info *info,
+					struct vc_data *vc)
+{
+	struct fbcon_ops *ops = info->fbcon_par;
+	int fh = vc->vc_font.height;
+	int yres = FBCON_SWAP(ops->rotate, info->var.yres, info->var.xres);
+	int vyres = FBCON_SWAP(ops->rotate, info->var.yres_virtual,
+				   info->var.xres_virtual);
+
+	p->vrows = vyres/fh;
+	if (yres > (fh * (vc->vc_rows + 1)))
+		p->vrows -= (yres - (fh * vc->vc_rows)) / fh;
+	if ((yres % fh) && (vyres % fh < yres % fh))
+		p->vrows--;
+
+	/* update scrollmode in case hardware acceleration is used */
+	updatescrollmode_accel(p, info, vc);
 }

 #define PITCH(w) (((w) + 7) >> 3)
@@ -2148,7 +2165,7 @@ static int fbcon_switch(struct vc_data *vc)

 	updatescrollmode(p, info, vc);

-	switch (p->scrollmode) {
+	switch (fb_scrollmode(p)) {
 	case SCROLL_WRAP_MOVE:
 		scrollback_phys_max = p->vrows - vc->vc_rows;
 		break;
diff --git a/drivers/video/fbdev/core/fbcon.h b/drivers/video/fbdev/core/fbcon.h
index 9315b360c898..0f16cbc99e6a 100644
--- a/drivers/video/fbdev/core/fbcon.h
+++ b/drivers/video/fbdev/core/fbcon.h
@@ -29,7 +29,9 @@ struct fbcon_display {
     /* Filled in by the low-level console driver */
     const u_char *fontdata;
     int userfont;                   /* != 0 if fontdata kmalloc()ed */
-    u_short scrollmode;             /* Scroll Method */
+#ifdef CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION
+    u_short scrollmode;             /* Scroll Method, use fb_scrollmode() */
+#endif
     u_short inverse;                /* != 0 text black on white as default */
     short yscroll;                  /* Hardware scrolling */
     int vrows;                      /* number of virtual rows */
@@ -208,6 +210,17 @@ static inline int attr_col_ec(int shift, struct vc_data *vc,
 #define SCROLL_REDRAW	   0x004
 #define SCROLL_PAN_REDRAW  0x005

+static inline u_short fb_scrollmode(struct fbcon_display *fb)
+{
+#ifdef CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION
+	return fb->scrollmode;
+#else
+	/* hardcoded to SCROLL_REDRAW if acceleration was disabled. */
+	return SCROLL_REDRAW;
+#endif
+}
+
+
 #ifdef CONFIG_FB_TILEBLITTING
 extern void fbcon_set_tileops(struct vc_data *vc, struct fb_info *info);
 #endif
diff --git a/drivers/video/fbdev/core/fbcon_ccw.c b/drivers/video/fbdev/core/fbcon_ccw.c
index 9cd2c4b05c32..2789ace79634 100644
--- a/drivers/video/fbdev/core/fbcon_ccw.c
+++ b/drivers/video/fbdev/core/fbcon_ccw.c
@@ -65,7 +65,7 @@ static void ccw_bmove(struct vc_data *vc, struct fb_info *info, int sy,
 {
 	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_copyarea area;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);

 	area.sx = sy * vc->vc_font.height;
 	area.sy = vyres - ((sx + width) * vc->vc_font.width);
@@ -83,7 +83,7 @@ static void ccw_clear(struct vc_data *vc, struct fb_info *info, int sy,
 	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_fillrect region;
 	int bgshift = (vc->vc_hi_font_mask) ? 13 : 12;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);

 	region.color = attr_bgcol_ec(bgshift,vc,info);
 	region.dx = sy * vc->vc_font.height;
@@ -140,7 +140,7 @@ static void ccw_putcs(struct vc_data *vc, struct fb_info *info,
 	u32 cnt, pitch, size;
 	u32 attribute = get_attribute(info, scr_readw(s));
 	u8 *dst, *buf = NULL;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);

 	if (!ops->fontbuffer)
 		return;
@@ -229,7 +229,7 @@ static void ccw_cursor(struct vc_data *vc, struct fb_info *info, int mode,
 	int attribute, use_sw = vc->vc_cursor_type & CUR_SW;
 	int err = 1, dx, dy;
 	char *src;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);

 	if (!ops->fontbuffer)
 		return;
@@ -387,7 +387,7 @@ static int ccw_update_start(struct fb_info *info)
 {
 	struct fbcon_ops *ops = info->fbcon_par;
 	u32 yoffset;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
 	int err;

 	yoffset = (vyres - info->var.yres) - ops->var.xoffset;
diff --git a/drivers/video/fbdev/core/fbcon_cw.c b/drivers/video/fbdev/core/fbcon_cw.c
index 88d89fad3f05..86a254c1b2b7 100644
--- a/drivers/video/fbdev/core/fbcon_cw.c
+++ b/drivers/video/fbdev/core/fbcon_cw.c
@@ -50,7 +50,7 @@ static void cw_bmove(struct vc_data *vc, struct fb_info *info, int sy,
 {
 	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_copyarea area;
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p, info);

 	area.sx = vxres - ((sy + height) * vc->vc_font.height);
 	area.sy = sx * vc->vc_font.width;
@@ -68,7 +68,7 @@ static void cw_clear(struct vc_data *vc, struct fb_info *info, int sy,
 	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_fillrect region;
 	int bgshift = (vc->vc_hi_font_mask) ? 13 : 12;
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p, info);

 	region.color = attr_bgcol_ec(bgshift,vc,info);
 	region.dx = vxres - ((sy + height) * vc->vc_font.height);
@@ -125,7 +125,7 @@ static void cw_putcs(struct vc_data *vc, struct fb_info *info,
 	u32 cnt, pitch, size;
 	u32 attribute = get_attribute(info, scr_readw(s));
 	u8 *dst, *buf = NULL;
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p, info);

 	if (!ops->fontbuffer)
 		return;
@@ -212,7 +212,7 @@ static void cw_cursor(struct vc_data *vc, struct fb_info *info, int mode,
 	int attribute, use_sw = vc->vc_cursor_type & CUR_SW;
 	int err = 1, dx, dy;
 	char *src;
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p, info);

 	if (!ops->fontbuffer)
 		return;
@@ -369,7 +369,7 @@ static void cw_cursor(struct vc_data *vc, struct fb_info *info, int mode,
 static int cw_update_start(struct fb_info *info)
 {
 	struct fbcon_ops *ops = info->fbcon_par;
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vxres = GETVXRES(ops->p, info);
 	u32 xoffset;
 	int err;

diff --git a/drivers/video/fbdev/core/fbcon_rotate.h b/drivers/video/fbdev/core/fbcon_rotate.h
index e233444cda66..01cbe303b8a2 100644
--- a/drivers/video/fbdev/core/fbcon_rotate.h
+++ b/drivers/video/fbdev/core/fbcon_rotate.h
@@ -12,11 +12,11 @@
 #define _FBCON_ROTATE_H

 #define GETVYRES(s,i) ({                           \
-        (s == SCROLL_REDRAW || s == SCROLL_MOVE) ? \
+        (fb_scrollmode(s) == SCROLL_REDRAW || fb_scrollmode(s) == SCROLL_MOVE) ? \
         (i)->var.yres : (i)->var.yres_virtual; })

 #define GETVXRES(s,i) ({                           \
-        (s == SCROLL_REDRAW || s == SCROLL_MOVE || !(i)->fix.xpanstep) ? \
+        (fb_scrollmode(s) == SCROLL_REDRAW || fb_scrollmode(s) == SCROLL_MOVE || !(i)->fix.xpanstep) ? \
         (i)->var.xres : (i)->var.xres_virtual; })


diff --git a/drivers/video/fbdev/core/fbcon_ud.c b/drivers/video/fbdev/core/fbcon_ud.c
index 8d5e66b1bdfb..23bc045769d0 100644
--- a/drivers/video/fbdev/core/fbcon_ud.c
+++ b/drivers/video/fbdev/core/fbcon_ud.c
@@ -50,8 +50,8 @@ static void ud_bmove(struct vc_data *vc, struct fb_info *info, int sy,
 {
 	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_copyarea area;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
+	u32 vxres = GETVXRES(ops->p, info);

 	area.sy = vyres - ((sy + height) * vc->vc_font.height);
 	area.sx = vxres - ((sx + width) * vc->vc_font.width);
@@ -69,8 +69,8 @@ static void ud_clear(struct vc_data *vc, struct fb_info *info, int sy,
 	struct fbcon_ops *ops = info->fbcon_par;
 	struct fb_fillrect region;
 	int bgshift = (vc->vc_hi_font_mask) ? 13 : 12;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
+	u32 vxres = GETVXRES(ops->p, info);

 	region.color = attr_bgcol_ec(bgshift,vc,info);
 	region.dy = vyres - ((sy + height) * vc->vc_font.height);
@@ -162,8 +162,8 @@ static void ud_putcs(struct vc_data *vc, struct fb_info *info,
 	u32 mod = vc->vc_font.width % 8, cnt, pitch, size;
 	u32 attribute = get_attribute(info, scr_readw(s));
 	u8 *dst, *buf = NULL;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
+	u32 vxres = GETVXRES(ops->p, info);

 	if (!ops->fontbuffer)
 		return;
@@ -259,8 +259,8 @@ static void ud_cursor(struct vc_data *vc, struct fb_info *info, int mode,
 	int attribute, use_sw = vc->vc_cursor_type & CUR_SW;
 	int err = 1, dx, dy;
 	char *src;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
+	u32 vxres = GETVXRES(ops->p, info);

 	if (!ops->fontbuffer)
 		return;
@@ -410,8 +410,8 @@ static int ud_update_start(struct fb_info *info)
 {
 	struct fbcon_ops *ops = info->fbcon_par;
 	int xoffset, yoffset;
-	u32 vyres = GETVYRES(ops->p->scrollmode, info);
-	u32 vxres = GETVXRES(ops->p->scrollmode, info);
+	u32 vyres = GETVYRES(ops->p, info);
+	u32 vxres = GETVXRES(ops->p, info);
 	int err;

 	xoffset = vxres - info->var.xres - ops->var.xoffset;
--
2.34.1


  parent reply	other threads:[~2022-02-01 19:00 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-01 18:59 [PATCH v3 0/3] Fix regression introduced by disabling accelerated scrolling in fbcon Helge Deller
2022-02-01 18:59 ` [PATCH v3 1/3] Revert "fbdev: Garbage collect fbdev scrolling acceleration, part 1 (from TODO list)" Helge Deller
2022-02-01 18:59 ` [PATCH v3 2/3] Revert "fbcon: Disable accelerated scrolling" Helge Deller
2022-02-01 18:59 ` Helge Deller [this message]
2022-02-01 20:11   ` [PATCH v3 3/3] fbcon: Add option to enable legacy hardware acceleration Daniel Vetter
2022-02-01 20:11     ` Daniel Vetter
2022-02-01 22:52     ` Helge Deller
2022-02-01 22:52       ` Helge Deller
2022-02-02 11:05       ` Daniel Vetter
2022-02-02 11:05         ` Daniel Vetter
2022-02-02 13:41         ` Helge Deller
2022-02-02 13:41           ` Helge Deller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220201185954.169768-4-deller@gmx.de \
    --to=deller@gmx.de \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=daniel.vetter@ffwll.ch \
    --cc=dave.anglin@bell.net \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-fbdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.