[PATCH 4.19 00/86] 4.19.228-rc1 review

[PATCH 4.19 00/86] 4.19.228-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.19.228 release.
There are 86 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.228-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.19.228-rc1

Ritesh Harjani <riteshh@linux.ibm.com>
    ext4: fix error handling in ext4_restore_inline_data()

Sergey Shtylyov <s.shtylyov@omp.ru>
    EDAC/xgene: Fix deferred probing

Sergey Shtylyov <s.shtylyov@omp.ru>
    EDAC/altera: Fix deferred probing

Riwen Lu <luriwen@kylinos.cn>
    rtc: cmos: Evaluate century appropriate

Muhammad Usama Anjum <usama.anjum@collabora.com>
    selftests: futex: Use variable MAKE instead of make

Dai Ngo <dai.ngo@oracle.com>
    nfsd: nfsd4_setclientid_confirm mistakenly expires confirmed client.

John Meneghini <jmeneghi@redhat.com>
    scsi: bnx2fc: Make bnx2fc_recv_frame() mp safe

Dan Carpenter <dan.carpenter@oracle.com>
    ASoC: max9759: fix underflow in speaker_gain_control_put()

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    ASoC: cpcap: Check for NULL pointer after calling of_get_child_by_name

Miaoqian Lin <linmq006@gmail.com>
    ASoC: fsl: Add missing error handling in pcm030_fabric_probe

Dan Carpenter <dan.carpenter@oracle.com>
    drm/i915/overlay: Prevent divide by zero bugs in scaling

Yannick Vignon <yannick.vignon@nxp.com>
    net: stmmac: ensure PTP time register reads are consistent

Lior Nahmanson <liorna@nvidia.com>
    net: macsec: Verify that send_sci is on when setting Tx sci explicitly

Miquel Raynal <miquel.raynal@bootlin.com>
    net: ieee802154: Return meaningful error codes from the netlink helpers

Miquel Raynal <miquel.raynal@bootlin.com>
    net: ieee802154: ca8210: Stop leaking skb's

Miquel Raynal <miquel.raynal@bootlin.com>
    net: ieee802154: mcr20a: Fix lifs/sifs periods

Miquel Raynal <miquel.raynal@bootlin.com>
    net: ieee802154: hwsim: Ensure proper channel selection at probe time

Miaoqian Lin <linmq006@gmail.com>
    spi: meson-spicc: add IRQ check in meson_spicc_probe

Benjamin Gaignard <benjamin.gaignard@collabora.com>
    spi: mediatek: Avoid NULL pointer crash in interrupt

Kamal Dasu <kdasu.kdev@gmail.com>
    spi: bcm-qspi: check for valid cs before applying chip select

Joerg Roedel <jroedel@suse.de>
    iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()

Guoqing Jiang <guoqing.jiang@linux.dev>
    iommu/vt-d: Fix potential memory leak in intel_setup_irq_remapping()

Leon Romanovsky <leonro@nvidia.com>
    RDMA/mlx4: Don't continue event handler after memory allocation failure

Guenter Roeck <linux@roeck-us.net>
    Revert "ASoC: mediatek: Check for error clk pointer"

Martin K. Petersen <martin.petersen@oracle.com>
    block: bio-integrity: Advance seed correctly for larger interval sizes

Nick Lopez <github@glowingmonkey.org>
    drm/nouveau: fix off by one in BIOS boundary checking

Christian Lachner <gladiac@gmail.com>
    ALSA: hda/realtek: Fix silent output on Gigabyte X570 Aorus Xtreme after reboot from Windows

Christian Lachner <gladiac@gmail.com>
    ALSA: hda/realtek: Fix silent output on Gigabyte X570S Aorus Master (newer chipset)

Christian Lachner <gladiac@gmail.com>
    ALSA: hda/realtek: Add missing fixup-model entry for Gigabyte X570 ALC1220 quirks

Mark Brown <broonie@kernel.org>
    ASoC: ops: Reject out of bounds values in snd_soc_put_xr_sx()

Mark Brown <broonie@kernel.org>
    ASoC: ops: Reject out of bounds values in snd_soc_put_volsw_sx()

Mark Brown <broonie@kernel.org>
    ASoC: ops: Reject out of bounds values in snd_soc_put_volsw()

Paul Moore <paul@paul-moore.com>
    audit: improve audit queue handling when "audit=1" on cmdline

Eric Dumazet <edumazet@google.com>
    af_packet: fix data-race in packet_setsockopt / packet_setsockopt

Eric Dumazet <edumazet@google.com>
    rtnetlink: make sure to refresh master_dev/m_ops in __rtnl_newlink()

Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
    net: amd-xgbe: Fix skb data length underflow

Raju Rangoju <Raju.Rangoju@amd.com>
    net: amd-xgbe: ensure to reset the tx_timer_active flag

Georgi Valkov <gvalkov@abv.bg>
    ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback

Eric Dumazet <edumazet@google.com>
    tcp: fix possible socket leaks in internal pacing mode

Florian Westphal <fw@strlen.de>
    netfilter: nat: limit port clash resolution attempts

Florian Westphal <fw@strlen.de>
    netfilter: nat: remove l4 protocol port rovers

Eric Dumazet <edumazet@google.com>
    ipv4: tcp: send zero IPID in SYNACK messages

Eric Dumazet <edumazet@google.com>
    ipv4: raw: lock the socket in raw_bind()

Hangyu Hua <hbh25y@gmail.com>
    yam: fix a memory leak in yam_siocdevprivate()

Sukadev Bhattiprolu <sukadev@linux.ibm.com>
    ibmvnic: don't spin in tasklet

Sukadev Bhattiprolu <sukadev@linux.ibm.com>
    ibmvnic: init ->running_cap_crqs early

Marek Behún <kabel@kernel.org>
    phylib: fix potential use-after-free

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFS: Ensure the server has an up to date ctime before renaming

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFS: Ensure the server has an up to date ctime before hardlinking

Eric Dumazet <edumazet@google.com>
    ipv6: annotate accesses to fn->fn_sernum

José Expósito <jose.exposito89@gmail.com>
    drm/msm/dsi: invalid parameter check in msm_dsi_phy_enable

Xianting Tian <xianting.tian@linux.alibaba.com>
    drm/msm: Fix wrong size calculation

Jianguo Wu <wujianguo@chinatelecom.cn>
    net-procfs: show net devices bound packet types

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv4: nfs_atomic_open() can race when looking up a non-regular file

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv4: Handle case where the lookup of a directory fails

Guenter Roeck <linux@roeck-us.net>
    hwmon: (lm90) Reduce maximum conversion rate for G781

Eric Dumazet <edumazet@google.com>
    ipv4: avoid using shared IP generator for connected sockets

Xin Long <lucien.xin@gmail.com>
    ping: fix the sk_bound_dev_if match in ping_lookup

Congyu Liu <liu3101@purdue.edu>
    net: fix information leakage in /proc/net/ptype

Ido Schimmel <idosch@nvidia.com>
    ipv6_tunnel: Rate limit warning messages

John Meneghini <jmeneghi@redhat.com>
    scsi: bnx2fc: Flush destroy_work queue before calling bnx2fc_interface_put()

Matthias Kaehlcke <mka@chromium.org>
    rpmsg: char: Fix race between the release of rpmsg_eptdev and cdev

Sujit Kautkar <sujitka@chromium.org>
    rpmsg: char: Fix race between the release of rpmsg_ctrldev and cdev

Joe Damato <jdamato@fastly.com>
    i40e: fix unsigned stat widths

Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
    i40e: Fix queues reservation for XDP

Jedrzej Jagielski <jedrzej.jagielski@intel.com>
    i40e: Fix issue when maximum queues is exceeded

Jedrzej Jagielski <jedrzej.jagielski@intel.com>
    i40e: Increase delay to 1 s after global EMP reset

Christophe Leroy <christophe.leroy@csgroup.eu>
    powerpc/32: Fix boot failure with GCC latent entropy plugin

Marek Behún <kabel@kernel.org>
    net: sfp: ignore disabled SFP node

Badhri Jagan Sridharan <badhri@google.com>
    usb: typec: tcpm: Do not disconnect while receiving VBUS off

Alan Stern <stern@rowland.harvard.edu>
    USB: core: Fix hang in usb_kill_urb by adding memory barriers

Pavankumar Kondeti <quic_pkondeti@quicinc.com>
    usb: gadget: f_sourcesink: Fix isoc transfer for USB_SPEED_SUPER_PLUS

Jon Hunter <jonathanh@nvidia.com>
    usb: common: ulpi: Fix crash in ulpi_match()

Alan Stern <stern@rowland.harvard.edu>
    usb-storage: Add unusual-devs entry for VL817 USB-SATA bridge

Cameron Williams <cang1@live.co.uk>
    tty: Add support for Brainboxes UC cards.

daniel.starke@siemens.com <daniel.starke@siemens.com>
    tty: n_gsm: fix SW flow control encoding/handling

Valentin Caron <valentin.caron@foss.st.com>
    serial: stm32: fix software flow control transfer

Robert Hancock <robert.hancock@calian.com>
    serial: 8250: of: Fix mapped region size when using reg-offset property

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nft_payload: do not update layer 4 checksum when mangling fragments

Lucas Stach <l.stach@pengutronix.de>
    drm/etnaviv: relax submit size limits

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    PM: wakeup: simplify the output logic of pm_show_wakelocks()

Jan Kara <jack@suse.cz>
    udf: Fix NULL ptr deref when converting from inline format

Jan Kara <jack@suse.cz>
    udf: Restore i_lenAlloc when inode expansion fails

Steffen Maier <maier@linux.ibm.com>
    scsi: zfcp: Fix failed recovery on gone remote port with non-NPIV FCP devices

Vasily Gorbik <gor@linux.ibm.com>
    s390/hypfs: include z/VM guests with access control group set

Brian Gix <brian.gix@intel.com>
    Bluetooth: refactor malicious adv data check


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/powerpc/kernel/Makefile                       |   1 +
 arch/powerpc/lib/Makefile                          |   3 +
 arch/s390/hypfs/hypfs_vm.c                         |   6 +-
 block/bio-integrity.c                              |   2 +-
 drivers/edac/altera_edac.c                         |   2 +-
 drivers/edac/xgene_edac.c                          |   2 +-
 drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c       |   4 +-
 drivers/gpu/drm/i915/intel_overlay.c               |   3 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c              |   4 +-
 drivers/gpu/drm/msm/msm_drv.c                      |   2 +-
 drivers/gpu/drm/nouveau/nvkm/subdev/bios/base.c    |   2 +-
 drivers/hwmon/lm90.c                               |   2 +-
 drivers/infiniband/hw/mlx4/main.c                  |   2 +-
 drivers/iommu/amd_iommu_init.c                     |   2 +
 drivers/iommu/intel_irq_remapping.c                |  13 ++-
 drivers/net/ethernet/amd/xgbe/xgbe-drv.c           |  14 ++-
 drivers/net/ethernet/ibm/ibmvnic.c                 | 112 +++++++++++++--------
 drivers/net/ethernet/intel/i40e/i40e.h             |   9 +-
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c     |   2 +-
 drivers/net/ethernet/intel/i40e/i40e_main.c        |  44 ++++----
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c |  59 +++++++++++
 .../net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c  |  19 ++--
 drivers/net/hamradio/yam.c                         |   4 +-
 drivers/net/ieee802154/ca8210.c                    |   1 +
 drivers/net/ieee802154/mac802154_hwsim.c           |   1 +
 drivers/net/ieee802154/mcr20a.c                    |   4 +-
 drivers/net/macsec.c                               |   9 ++
 drivers/net/phy/phy_device.c                       |   6 +-
 drivers/net/phy/phylink.c                          |   5 +
 drivers/net/usb/ipheth.c                           |   6 +-
 drivers/rpmsg/rpmsg_char.c                         |  22 +---
 drivers/rtc/rtc-mc146818-lib.c                     |   2 +-
 drivers/s390/scsi/zfcp_fc.c                        |  13 ++-
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c                  |  41 ++++----
 drivers/soc/mediatek/mtk-scpsys.c                  |  15 +--
 drivers/spi/spi-bcm-qspi.c                         |   2 +-
 drivers/spi/spi-meson-spicc.c                      |   5 +
 drivers/spi/spi-mt65xx.c                           |   2 +-
 drivers/tty/n_gsm.c                                |   4 +-
 drivers/tty/serial/8250/8250_of.c                  |  11 +-
 drivers/tty/serial/8250/8250_pci.c                 | 100 +++++++++++++++++-
 drivers/tty/serial/stm32-usart.c                   |   2 +-
 drivers/usb/common/ulpi.c                          |   7 +-
 drivers/usb/core/hcd.c                             |  14 +++
 drivers/usb/core/urb.c                             |  12 +++
 drivers/usb/gadget/function/f_sourcesink.c         |   1 +
 drivers/usb/storage/unusual_devs.h                 |  10 ++
 drivers/usb/typec/tcpm.c                           |   3 +-
 fs/ext4/inline.c                                   |  10 +-
 fs/nfs/dir.c                                       |  22 ++++
 fs/nfsd/nfs4state.c                                |   4 +-
 fs/udf/inode.c                                     |   9 +-
 include/linux/netdevice.h                          |   1 +
 include/net/ip.h                                   |  21 ++--
 include/net/ip6_fib.h                              |   2 +-
 include/net/netfilter/nf_nat_l4proto.h             |   2 +-
 kernel/audit.c                                     |  62 ++++++++----
 kernel/power/wakelock.c                            |  12 +--
 net/bluetooth/hci_event.c                          |  10 +-
 net/core/net-procfs.c                              |  38 ++++++-
 net/core/rtnetlink.c                               |   6 +-
 net/ieee802154/nl802154.c                          |   8 +-
 net/ipv4/ip_output.c                               |  11 +-
 net/ipv4/ping.c                                    |   3 +-
 net/ipv4/raw.c                                     |   5 +-
 net/ipv4/tcp_output.c                              |  31 ++++--
 net/ipv6/ip6_fib.c                                 |  23 +++--
 net/ipv6/ip6_tunnel.c                              |   8 +-
 net/ipv6/route.c                                   |   2 +-
 net/netfilter/nf_nat_proto_common.c                |  37 ++++---
 net/netfilter/nf_nat_proto_dccp.c                  |   5 +-
 net/netfilter/nf_nat_proto_sctp.c                  |   5 +-
 net/netfilter/nf_nat_proto_tcp.c                   |   5 +-
 net/netfilter/nf_nat_proto_udp.c                   |  10 +-
 net/netfilter/nft_payload.c                        |   3 +
 net/packet/af_packet.c                             |  10 +-
 sound/pci/hda/patch_realtek.c                      |   5 +-
 sound/soc/codecs/cpcap.c                           |   2 +
 sound/soc/codecs/max9759.c                         |   3 +-
 sound/soc/fsl/pcm030-audio-fabric.c                |  11 +-
 sound/soc/soc-ops.c                                |  29 +++++-
 tools/testing/selftests/futex/Makefile             |   4 +-
 83 files changed, 731 insertions(+), 303 deletions(-)

[PATCH 4.19 01/86] Bluetooth: refactor malicious adv data check

[Greg Kroah-Hartman]

From: Brian Gix <brian.gix@intel.com>

commit 899663be5e75dc0174dc8bda0b5e6826edf0b29a upstream.

Check for out-of-bound read was being performed at the end of while
num_reports loop, and would fill journal with false positives. Added
check to beginning of loop processing so that it doesn't get checked
after ptr has been advanced.

Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: syphyr <syphyr@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bluetooth/hci_event.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -5391,6 +5391,11 @@ static void hci_le_adv_report_evt(struct
 		struct hci_ev_le_advertising_info *ev = ptr;
 		s8 rssi;
 
+		if (ptr > (void *)skb_tail_pointer(skb) - sizeof(*ev)) {
+			bt_dev_err(hdev, "Malicious advertising data.");
+			break;
+		}
+
 		if (ev->length <= HCI_MAX_AD_LENGTH &&
 		    ev->data + ev->length <= skb_tail_pointer(skb)) {
 			rssi = ev->data[ev->length];
@@ -5402,11 +5407,6 @@ static void hci_le_adv_report_evt(struct
 		}
 
 		ptr += sizeof(*ev) + ev->length + 1;
-
-		if (ptr > (void *) skb_tail_pointer(skb) - sizeof(*ev)) {
-			bt_dev_err(hdev, "Malicious advertising data. Stopping processing");
-			break;
-		}
 	}
 
 	hci_dev_unlock(hdev);

[PATCH 4.19 02/86] s390/hypfs: include z/VM guests with access control group set

[Greg Kroah-Hartman]

From: Vasily Gorbik <gor@linux.ibm.com>

commit 663d34c8df98740f1e90241e78e456d00b3c6cad upstream.

Currently if z/VM guest is allowed to retrieve hypervisor performance
data globally for all guests (privilege class B) the query is formed in a
way to include all guests but the group name is left empty. This leads to
that z/VM guests which have access control group set not being included
in the results (even local vm).

Change the query group identifier from empty to "any" to retrieve
information about all guests from any groups (or without a group set).

Cc: stable@vger.kernel.org
Fixes: 31cb4bd31a48 ("[S390] Hypervisor filesystem (s390_hypfs) for z/VM")
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/hypfs/hypfs_vm.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/arch/s390/hypfs/hypfs_vm.c
+++ b/arch/s390/hypfs/hypfs_vm.c
@@ -20,6 +20,7 @@
 
 static char local_guest[] = "        ";
 static char all_guests[] = "*       ";
+static char *all_groups = all_guests;
 static char *guest_query;
 
 struct diag2fc_data {
@@ -62,10 +63,11 @@ static int diag2fc(int size, char* query
 
 	memcpy(parm_list.userid, query, NAME_LEN);
 	ASCEBC(parm_list.userid, NAME_LEN);
-	parm_list.addr = (unsigned long) addr ;
+	memcpy(parm_list.aci_grp, all_groups, NAME_LEN);
+	ASCEBC(parm_list.aci_grp, NAME_LEN);
+	parm_list.addr = (unsigned long)addr;
 	parm_list.size = size;
 	parm_list.fmt = 0x02;
-	memset(parm_list.aci_grp, 0x40, NAME_LEN);
 	rc = -1;
 
 	diag_stat_inc(DIAG_STAT_X2FC);

[PATCH 4.19 03/86] scsi: zfcp: Fix failed recovery on gone remote port with non-NPIV FCP devices

[Greg Kroah-Hartman]

From: Steffen Maier <maier@linux.ibm.com>

commit 8c9db6679be4348b8aae108e11d4be2f83976e30 upstream.

Suppose we have an environment with a number of non-NPIV FCP devices
(virtual HBAs / FCP devices / zfcp "adapter"s) sharing the same physical
FCP channel (HBA port) and its I_T nexus. Plus a number of storage target
ports zoned to such shared channel. Now one target port logs out of the
fabric causing an RSCN. Zfcp reacts with an ADISC ELS and subsequent port
recovery depending on the ADISC result. This happens on all such FCP
devices (in different Linux images) concurrently as they all receive a copy
of this RSCN. In the following we look at one of those FCP devices.

Requests other than FSF_QTCB_FCP_CMND can be slow until they get a
response.

Depending on which requests are affected by slow responses, there are
different recovery outcomes. Here we want to fix failed recoveries on port
or adapter level by avoiding recovery requests that can be slow.

We need the cached N_Port_ID for the remote port "link" test with ADISC.
Just before sending the ADISC, we now intentionally forget the old cached
N_Port_ID. The idea is that on receiving an RSCN for a port, we have to
assume that any cached information about this port is stale.  This forces a
fresh new GID_PN [FC-GS] nameserver lookup on any subsequent recovery for
the same port. Since we typically can still communicate with the nameserver
efficiently, we now reach steady state quicker: Either the nameserver still
does not know about the port so we stop recovery, or the nameserver already
knows the port potentially with a new N_Port_ID and we can successfully and
quickly perform open port recovery.  For the one case, where ADISC returns
successfully, we re-initialize port->d_id because that case does not
involve any port recovery.

This also solves a problem if the storage WWPN quickly logs into the fabric
again but with a different N_Port_ID. Such as on virtual WWPN takeover
during target NPIV failover.
[https://www.redbooks.ibm.com/abstracts/redp5477.html] In that case the
RSCN from the storage FDISC was ignored by zfcp and we could not
successfully recover the failover. On some later failback on the storage,
we could have been lucky if the virtual WWPN got the same old N_Port_ID
from the SAN switch as we still had cached.  Then the related RSCN
triggered a successful port reopen recovery.  However, there is no
guarantee to get the same N_Port_ID on NPIV FDISC.

Even though NPIV-enabled FCP devices are not affected by this problem, this
code change optimizes recovery time for gone remote ports as a side effect.
The timely drop of cached N_Port_IDs prevents unnecessary slow open port
attempts.

While the problem might have been in code before v2.6.32 commit
799b76d09aee ("[SCSI] zfcp: Decouple gid_pn requests from erp") this fix
depends on the gid_pn_work introduced with that commit, so we mark it as
culprit to satisfy fix dependencies.

Note: Point-to-point remote port is already handled separately and gets its
N_Port_ID from the cached peer_d_id. So resetting port->d_id in general
does not affect PtP.

Link: https://lore.kernel.org/r/20220118165803.3667947-1-maier@linux.ibm.com
Fixes: 799b76d09aee ("[SCSI] zfcp: Decouple gid_pn requests from erp")
Cc: <stable@vger.kernel.org> #2.6.32+
Suggested-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/scsi/zfcp_fc.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -521,6 +521,8 @@ static void zfcp_fc_adisc_handler(void *
 		goto out;
 	}
 
+	/* re-init to undo drop from zfcp_fc_adisc() */
+	port->d_id = ntoh24(adisc_resp->adisc_port_id);
 	/* port is good, unblock rport without going through erp */
 	zfcp_scsi_schedule_rport_register(port);
  out:
@@ -534,6 +536,7 @@ static int zfcp_fc_adisc(struct zfcp_por
 	struct zfcp_fc_req *fc_req;
 	struct zfcp_adapter *adapter = port->adapter;
 	struct Scsi_Host *shost = adapter->scsi_host;
+	u32 d_id;
 	int ret;
 
 	fc_req = kmem_cache_zalloc(zfcp_fc_req_cache, GFP_ATOMIC);
@@ -558,7 +561,15 @@ static int zfcp_fc_adisc(struct zfcp_por
 	fc_req->u.adisc.req.adisc_cmd = ELS_ADISC;
 	hton24(fc_req->u.adisc.req.adisc_port_id, fc_host_port_id(shost));
 
-	ret = zfcp_fsf_send_els(adapter, port->d_id, &fc_req->ct_els,
+	d_id = port->d_id; /* remember as destination for send els below */
+	/*
+	 * Force fresh GID_PN lookup on next port recovery.
+	 * Must happen after request setup and before sending request,
+	 * to prevent race with port->d_id re-init in zfcp_fc_adisc_handler().
+	 */
+	port->d_id = 0;
+
+	ret = zfcp_fsf_send_els(adapter, d_id, &fc_req->ct_els,
 				ZFCP_FC_CTELS_TMO);
 	if (ret)
 		kmem_cache_free(zfcp_fc_req_cache, fc_req);

[PATCH 4.19 04/86] udf: Restore i_lenAlloc when inode expansion fails

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

commit ea8569194b43f0f01f0a84c689388542c7254a1f upstream.

When we fail to expand inode from inline format to a normal format, we
restore inode to contain the original inline formatting but we forgot to
set i_lenAlloc back. The mismatch between i_lenAlloc and i_size was then
causing further problems such as warnings and lost data down the line.

Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
CC: stable@vger.kernel.org
Fixes: 7e49b6f2480c ("udf: Convert UDF to new truncate calling sequence")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/udf/inode.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -311,6 +311,7 @@ int udf_expand_file_adinicb(struct inode
 		unlock_page(page);
 		iinfo->i_alloc_type = ICBTAG_FLAG_AD_IN_ICB;
 		inode->i_data.a_ops = &udf_adinicb_aops;
+		iinfo->i_lenAlloc = inode->i_size;
 		up_write(&iinfo->i_data_sem);
 	}
 	put_page(page);

[PATCH 4.19 05/86] udf: Fix NULL ptr deref when converting from inline format

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

commit 7fc3b7c2981bbd1047916ade327beccb90994eee upstream.

udf_expand_file_adinicb() calls directly ->writepage to write data
expanded into a page. This however misses to setup inode for writeback
properly and so we can crash on inode->i_wb dereference when submitting
page for IO like:

  BUG: kernel NULL pointer dereference, address: 0000000000000158
  #PF: supervisor read access in kernel mode
...
  <TASK>
  __folio_start_writeback+0x2ac/0x350
  __block_write_full_page+0x37d/0x490
  udf_expand_file_adinicb+0x255/0x400 [udf]
  udf_file_write_iter+0xbe/0x1b0 [udf]
  new_sync_write+0x125/0x1c0
  vfs_write+0x28e/0x400

Fix the problem by marking the page dirty and going through the standard
writeback path to write the page. Strictly speaking we would not even
have to write the page but we want to catch e.g. ENOSPC errors early.

Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
CC: stable@vger.kernel.org
Fixes: 52ebea749aae ("writeback: make backing_dev_info host cgroup-specific bdi_writebacks")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/udf/inode.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -251,10 +251,6 @@ int udf_expand_file_adinicb(struct inode
 	char *kaddr;
 	struct udf_inode_info *iinfo = UDF_I(inode);
 	int err;
-	struct writeback_control udf_wbc = {
-		.sync_mode = WB_SYNC_NONE,
-		.nr_to_write = 1,
-	};
 
 	WARN_ON_ONCE(!inode_is_locked(inode));
 	if (!iinfo->i_lenAlloc) {
@@ -298,8 +294,10 @@ int udf_expand_file_adinicb(struct inode
 		iinfo->i_alloc_type = ICBTAG_FLAG_AD_LONG;
 	/* from now on we have normal address_space methods */
 	inode->i_data.a_ops = &udf_aops;
+	set_page_dirty(page);
+	unlock_page(page);
 	up_write(&iinfo->i_data_sem);
-	err = inode->i_data.a_ops->writepage(page, &udf_wbc);
+	err = filemap_fdatawrite(inode->i_mapping);
 	if (err) {
 		/* Restore everything back so that we don't lose data... */
 		lock_page(page);

[PATCH 4.19 06/86] PM: wakeup: simplify the output logic of pm_show_wakelocks()

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c9d967b2ce40d71e968eb839f36c936b8a9cf1ea upstream.

The buffer handling in pm_show_wakelocks() is tricky, and hopefully
correct.  Ensure it really is correct by using sysfs_emit_at() which
handles all of the tricky string handling logic in a PAGE_SIZE buffer
for us automatically as this is a sysfs file being read from.

Reviewed-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/power/wakelock.c |   12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

--- a/kernel/power/wakelock.c
+++ b/kernel/power/wakelock.c
@@ -39,23 +39,19 @@ ssize_t pm_show_wakelocks(char *buf, boo
 {
 	struct rb_node *node;
 	struct wakelock *wl;
-	char *str = buf;
-	char *end = buf + PAGE_SIZE;
+	int len = 0;
 
 	mutex_lock(&wakelocks_lock);
 
 	for (node = rb_first(&wakelocks_tree); node; node = rb_next(node)) {
 		wl = rb_entry(node, struct wakelock, node);
 		if (wl->ws.active == show_active)
-			str += scnprintf(str, end - str, "%s ", wl->name);
+			len += sysfs_emit_at(buf, len, "%s ", wl->name);
 	}
-	if (str > buf)
-		str--;
-
-	str += scnprintf(str, end - str, "\n");
+	len += sysfs_emit_at(buf, len, "\n");
 
 	mutex_unlock(&wakelocks_lock);
-	return (str - buf);
+	return len;
 }
 
 #if CONFIG_PM_WAKELOCKS_LIMIT > 0

[PATCH 4.19 07/86] drm/etnaviv: relax submit size limits

[Greg Kroah-Hartman]

From: Lucas Stach <l.stach@pengutronix.de>

commit e3d26528e083e612314d4dcd713f3d5a26143ddc upstream.

While all userspace tried to limit commandstreams to 64K in size,
a bug in the Mesa driver lead to command streams of up to 128K
being submitted. Allow those to avoid breaking existing userspace.

Fixes: 6dfa2fab8ddd ("drm/etnaviv: limit submit sizes")
Cc: stable@vger.kernel.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c
@@ -444,8 +444,8 @@ int etnaviv_ioctl_gem_submit(struct drm_
 		return -EINVAL;
 	}
 
-	if (args->stream_size > SZ_64K || args->nr_relocs > SZ_64K ||
-	    args->nr_bos > SZ_64K || args->nr_pmrs > 128) {
+	if (args->stream_size > SZ_128K || args->nr_relocs > SZ_128K ||
+	    args->nr_bos > SZ_128K || args->nr_pmrs > 128) {
 		DRM_ERROR("submit arguments out of size limits\n");
 		return -EINVAL;
 	}

[PATCH 4.19 08/86] netfilter: nft_payload: do not update layer 4 checksum when mangling fragments

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

commit 4e1860a3863707e8177329c006d10f9e37e097a8 upstream.

IP fragments do not come with the transport header, hence skip bogus
layer 4 checksum updates.

Fixes: 1814096980bb ("netfilter: nft_payload: layer 4 checksum adjustment for pseudoheader fields")
Reported-and-tested-by: Steffen Weinreich <steve@weinreich.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nft_payload.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/netfilter/nft_payload.c
+++ b/net/netfilter/nft_payload.c
@@ -194,6 +194,9 @@ static int nft_payload_l4csum_offset(con
 				     struct sk_buff *skb,
 				     unsigned int *l4csum_offset)
 {
+	if (pkt->xt.fragoff)
+		return -1;
+
 	switch (pkt->tprot) {
 	case IPPROTO_TCP:
 		*l4csum_offset = offsetof(struct tcphdr, check);

[PATCH 4.19 09/86] serial: 8250: of: Fix mapped region size when using reg-offset property

[Greg Kroah-Hartman]

From: Robert Hancock <robert.hancock@calian.com>

commit d06b1cf28297e27127d3da54753a3a01a2fa2f28 upstream.

8250_of supports a reg-offset property which is intended to handle
cases where the device registers start at an offset inside the region
of memory allocated to the device. The Xilinx 16550 UART, for which this
support was initially added, requires this. However, the code did not
adjust the overall size of the mapped region accordingly, causing the
driver to request an area of memory past the end of the device's
allocation. For example, if the UART was allocated an address of
0xb0130000, size of 0x10000 and reg-offset of 0x1000 in the device
tree, the region of memory reserved was b0131000-b0140fff, which caused
the driver for the region starting at b0140000 to fail to probe.

Fix this by subtracting reg-offset from the mapped region size.

Fixes: b912b5e2cfb3 ([POWERPC] Xilinx: of_serial support for Xilinx uart 16550.)
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220112194214.881844-1-robert.hancock@calian.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_of.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -104,8 +104,17 @@ static int of_platform_serial_setup(stru
 		port->mapsize = resource_size(&resource);
 
 		/* Check for shifted address mapping */
-		if (of_property_read_u32(np, "reg-offset", &prop) == 0)
+		if (of_property_read_u32(np, "reg-offset", &prop) == 0) {
+			if (prop >= port->mapsize) {
+				dev_warn(&ofdev->dev, "reg-offset %u exceeds region size %pa\n",
+					 prop, &port->mapsize);
+				ret = -EINVAL;
+				goto err_unprepare;
+			}
+
 			port->mapbase += prop;
+			port->mapsize -= prop;
+		}
 
 		port->iotype = UPIO_MEM;
 		if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {

[PATCH 4.19 10/86] serial: stm32: fix software flow control transfer

[Greg Kroah-Hartman]

From: Valentin Caron <valentin.caron@foss.st.com>

commit 037b91ec7729524107982e36ec4b40f9b174f7a2 upstream.

x_char is ignored by stm32_usart_start_tx() when xmit buffer is empty.

Fix start_tx condition to allow x_char to be sent.

Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20220111164441.6178-3-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/stm32-usart.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -509,7 +509,7 @@ static void stm32_start_tx(struct uart_p
 {
 	struct circ_buf *xmit = &port->state->xmit;
 
-	if (uart_circ_empty(xmit))
+	if (uart_circ_empty(xmit) && !port->x_char)
 		return;
 
 	stm32_transmit_chars(port);

[PATCH 4.19 11/86] tty: n_gsm: fix SW flow control encoding/handling

[Greg Kroah-Hartman]

From: daniel.starke@siemens.com <daniel.starke@siemens.com>

commit 8838b2af23caf1ff0610caef2795d6668a013b2d upstream.

n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.2.7.3 states that DC1 (XON) and DC3 (XOFF)
are the control characters defined in ISO/IEC 646. These shall be quoted if
seen in the data stream to avoid interpretation as flow control characters.

ISO/IEC 646 refers to the set of ISO standards described as the ISO
7-bit coded character set for information interchange. Its final version
is also known as ITU T.50.
See https://www.itu.int/rec/T-REC-T.50-199209-I/en

To abide the standard it is needed to quote DC1 and DC3 correctly if these
are seen as data bytes and not as control characters. The current
implementation already tries to enforce this but fails to catch all
defined cases. 3GPP 27.010 chapter 5.2.7.3 clearly states that the most
significant bit shall be ignored for DC1 and DC3 handling. The current
implementation handles only the case with the most significant bit set 0.
Cases in which DC1 and DC3 have the most significant bit set 1 are left
unhandled.

This patch fixes this by masking the data bytes with ISO_IEC_646_MASK (only
the 7 least significant bits set 1) before comparing them with XON
(a.k.a. DC1) and XOFF (a.k.a. DC3) when testing which byte values need
quotation via byte stuffing.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220120101857.2509-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_gsm.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -313,6 +313,7 @@ static struct tty_driver *gsm_tty_driver
 #define GSM1_ESCAPE_BITS	0x20
 #define XON			0x11
 #define XOFF			0x13
+#define ISO_IEC_646_MASK	0x7F
 
 static const struct tty_port_operations gsm_port_ops;
 
@@ -531,7 +532,8 @@ static int gsm_stuff_frame(const u8 *inp
 	int olen = 0;
 	while (len--) {
 		if (*input == GSM1_SOF || *input == GSM1_ESCAPE
-		    || *input == XON || *input == XOFF) {
+		    || (*input & ISO_IEC_646_MASK) == XON
+		    || (*input & ISO_IEC_646_MASK) == XOFF) {
 			*output++ = GSM1_ESCAPE;
 			*output++ = *input++ ^ GSM1_ESCAPE_BITS;
 			olen++;

[PATCH 4.19 12/86] tty: Add support for Brainboxes UC cards.

[Greg Kroah-Hartman]

From: Cameron Williams <cang1@live.co.uk>

commit 152d1afa834c84530828ee031cf07a00e0fc0b8c upstream.

This commit adds support for the some of the Brainboxes PCI range of
cards, including the UC-101, UC-235/246, UC-257, UC-268, UC-275/279,
UC-302, UC-310, UC-313, UC-320/324, UC-346, UC-357, UC-368
and UC-420/431.

Signed-off-by: Cameron Williams <cang1@live.co.uk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/AM5PR0202MB2564688493F7DD9B9C610827C45E9@AM5PR0202MB2564.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_pci.c |  100 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 98 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -4797,8 +4797,30 @@ static const struct pci_device_id serial
 	{	PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,    /* 135a.0dc0 */
 		pbn_b2_4_115200 },
+	/* Brainboxes Devices */
 	/*
-	 * BrainBoxes UC-260
+	* Brainboxes UC-101
+	*/
+	{       PCI_VENDOR_ID_INTASHIELD, 0x0BA1,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UC-235/246
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0AA1,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_1_115200 },
+	/*
+	 * Brainboxes UC-257
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0861,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UC-260/271/701/756
 	 */
 	{	PCI_VENDOR_ID_INTASHIELD, 0x0D21,
 		PCI_ANY_ID, PCI_ANY_ID,
@@ -4806,7 +4828,81 @@ static const struct pci_device_id serial
 		pbn_b2_4_115200 },
 	{	PCI_VENDOR_ID_INTASHIELD, 0x0E34,
 		PCI_ANY_ID, PCI_ANY_ID,
-		 PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00,
+		PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00,
+		pbn_b2_4_115200 },
+	/*
+	 * Brainboxes UC-268
+	 */
+	{       PCI_VENDOR_ID_INTASHIELD, 0x0841,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_4_115200 },
+	/*
+	 * Brainboxes UC-275/279
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0881,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_8_115200 },
+	/*
+	 * Brainboxes UC-302
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x08E1,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UC-310
+	 */
+	{       PCI_VENDOR_ID_INTASHIELD, 0x08C1,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UC-313
+	 */
+	{       PCI_VENDOR_ID_INTASHIELD, 0x08A3,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UC-320/324
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0A61,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_1_115200 },
+	/*
+	 * Brainboxes UC-346
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0B02,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_4_115200 },
+	/*
+	 * Brainboxes UC-357
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0A81,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0A83,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_2_115200 },
+	/*
+	 * Brainboxes UC-368
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x0C41,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b2_4_115200 },
+	/*
+	 * Brainboxes UC-420/431
+	 */
+	{       PCI_VENDOR_ID_INTASHIELD, 0x0921,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
 		pbn_b2_4_115200 },
 	/*
 	 * Perle PCI-RAS cards

[PATCH 4.19 13/86] usb-storage: Add unusual-devs entry for VL817 USB-SATA bridge

[Greg Kroah-Hartman]

From: Alan Stern <stern@rowland.harvard.edu>

commit 5b67b315037250a61861119683e7fcb509deea25 upstream.

Two people have reported (and mentioned numerous other reports on the
web) that VIA's VL817 USB-SATA bridge does not work with the uas
driver.  Typical log messages are:

[ 3606.232149] sd 14:0:0:0: [sdg] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD
[ 3606.232154] sd 14:0:0:0: [sdg] tag#2 CDB: Write(16) 8a 00 00 00 00 00 18 0c c9 80 00 00 00 80 00 00
[ 3606.306257] usb 4-4.4: reset SuperSpeed Plus Gen 2x1 USB device number 11 using xhci_hcd
[ 3606.328584] scsi host14: uas_eh_device_reset_handler success

Surprisingly, the devices do seem to work okay for some other people.
The cause of the differing behaviors is not known.

In the hope of getting the devices to work for the most users, even at
the possible cost of degraded performance for some, this patch adds an
unusual_devs entry for the VL817 to block it from binding to the uas
driver by default.  Users will be able to override this entry by means
of a module parameter, if they want.

CC: <stable@vger.kernel.org>
Reported-by: DocMAX <mail@vacharakis.de>
Reported-and-tested-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/Ye8IsK2sjlEv1rqU@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/storage/unusual_devs.h |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2301,6 +2301,16 @@ UNUSUAL_DEV(  0x2027, 0xa001, 0x0000, 0x
 		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ),
 
+/*
+ * Reported by DocMAX <mail@vacharakis.de>
+ * and Thomas Weißschuh <linux@weissschuh.net>
+ */
+UNUSUAL_DEV( 0x2109, 0x0715, 0x9999, 0x9999,
+		"VIA Labs, Inc.",
+		"VL817 SATA Bridge",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_UAS),
+
 UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
 		"ST",
 		"2A",

[PATCH 4.19 14/86] usb: common: ulpi: Fix crash in ulpi_match()

[Greg Kroah-Hartman]

From: Jon Hunter <jonathanh@nvidia.com>

commit 2e3dd4a6246945bf84ea6f478365d116e661554c upstream.

Commit 7495af930835 ("ARM: multi_v7_defconfig: Enable drivers for
DragonBoard 410c") enables the CONFIG_PHY_QCOM_USB_HS for the ARM
multi_v7_defconfig. Enabling this Kconfig is causing the kernel to crash
on the Tegra20 Ventana platform in the ulpi_match() function.

The Qualcomm USB HS PHY driver that is enabled by CONFIG_PHY_QCOM_USB_HS,
registers a ulpi_driver but this driver does not provide an 'id_table',
so when ulpi_match() is called on the Tegra20 Ventana platform, it
crashes when attempting to deference the id_table pointer which is not
valid. The Qualcomm USB HS PHY driver uses device-tree for matching the
ULPI driver with the device and so fix this crash by using device-tree
for matching if the id_table is not valid.

Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20220117150039.44058-1-jonathanh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/common/ulpi.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/usb/common/ulpi.c
+++ b/drivers/usb/common/ulpi.c
@@ -39,8 +39,11 @@ static int ulpi_match(struct device *dev
 	struct ulpi *ulpi = to_ulpi_dev(dev);
 	const struct ulpi_device_id *id;
 
-	/* Some ULPI devices don't have a vendor id so rely on OF match */
-	if (ulpi->id.vendor == 0)
+	/*
+	 * Some ULPI devices don't have a vendor id
+	 * or provide an id_table so rely on OF match.
+	 */
+	if (ulpi->id.vendor == 0 || !drv->id_table)
 		return of_driver_match_device(dev, driver);
 
 	for (id = drv->id_table; id->vendor; id++)

[PATCH 4.19 15/86] usb: gadget: f_sourcesink: Fix isoc transfer for USB_SPEED_SUPER_PLUS

[Greg Kroah-Hartman]

From: Pavankumar Kondeti <quic_pkondeti@quicinc.com>

commit 904edf8aeb459697129be5fde847e2a502f41fd9 upstream.

Currently when gadget enumerates in super speed plus, the isoc
endpoint request buffer size is not calculated correctly. Fix
this by checking the gadget speed against USB_SPEED_SUPER_PLUS
and update the request buffer size.

Fixes: 90c4d05780d4 ("usb: fix various gadgets null ptr deref on 10gbps cabling.")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Link: https://lore.kernel.org/r/1642820602-20619-1-git-send-email-quic_pkondeti@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/f_sourcesink.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/gadget/function/f_sourcesink.c
+++ b/drivers/usb/gadget/function/f_sourcesink.c
@@ -583,6 +583,7 @@ static int source_sink_start_ep(struct f
 
 	if (is_iso) {
 		switch (speed) {
+		case USB_SPEED_SUPER_PLUS:
 		case USB_SPEED_SUPER:
 			size = ss->isoc_maxpacket *
 					(ss->isoc_mult + 1) *

[PATCH 4.19 16/86] USB: core: Fix hang in usb_kill_urb by adding memory barriers

[Greg Kroah-Hartman]

From: Alan Stern <stern@rowland.harvard.edu>

commit 26fbe9772b8c459687930511444ce443011f86bf upstream.

The syzbot fuzzer has identified a bug in which processes hang waiting
for usb_kill_urb() to return.  It turns out the issue is not unlinking
the URB; that works just fine.  Rather, the problem arises when the
wakeup notification that the URB has completed is not received.

The reason is memory-access ordering on SMP systems.  In outline form,
usb_kill_urb() and __usb_hcd_giveback_urb() operating concurrently on
different CPUs perform the following actions:

CPU 0					CPU 1
----------------------------		---------------------------------
usb_kill_urb():				__usb_hcd_giveback_urb():
  ...					  ...
  atomic_inc(&urb->reject);		  atomic_dec(&urb->use_count);
  ...					  ...
  wait_event(usb_kill_urb_queue,
	atomic_read(&urb->use_count) == 0);
					  if (atomic_read(&urb->reject))
						wake_up(&usb_kill_urb_queue);

Confining your attention to urb->reject and urb->use_count, you can
see that the overall pattern of accesses on CPU 0 is:

	write urb->reject, then read urb->use_count;

whereas the overall pattern of accesses on CPU 1 is:

	write urb->use_count, then read urb->reject.

This pattern is referred to in memory-model circles as SB (for "Store
Buffering"), and it is well known that without suitable enforcement of
the desired order of accesses -- in the form of memory barriers -- it
is entirely possible for one or both CPUs to execute their reads ahead
of their writes.  The end result will be that sometimes CPU 0 sees the
old un-decremented value of urb->use_count while CPU 1 sees the old
un-incremented value of urb->reject.  Consequently CPU 0 ends up on
the wait queue and never gets woken up, leading to the observed hang
in usb_kill_urb().

The same pattern of accesses occurs in usb_poison_urb() and the
failure pathway of usb_hcd_submit_urb().

The problem is fixed by adding suitable memory barriers.  To provide
proper memory-access ordering in the SB pattern, a full barrier is
required on both CPUs.  The atomic_inc() and atomic_dec() accesses
themselves don't provide any memory ordering, but since they are
present, we can use the optimized smp_mb__after_atomic() memory
barrier in the various routines to obtain the desired effect.

This patch adds the necessary memory barriers.

CC: <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+76629376e06e2c2ad626@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/Ye8K0QYee0Q0Nna2@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/hcd.c |   14 ++++++++++++++
 drivers/usb/core/urb.c |   12 ++++++++++++
 2 files changed, 26 insertions(+)

--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1670,6 +1670,13 @@ int usb_hcd_submit_urb (struct urb *urb,
 		urb->hcpriv = NULL;
 		INIT_LIST_HEAD(&urb->urb_list);
 		atomic_dec(&urb->use_count);
+		/*
+		 * Order the write of urb->use_count above before the read
+		 * of urb->reject below.  Pairs with the memory barriers in
+		 * usb_kill_urb() and usb_poison_urb().
+		 */
+		smp_mb__after_atomic();
+
 		atomic_dec(&urb->dev->urbnum);
 		if (atomic_read(&urb->reject))
 			wake_up(&usb_kill_urb_queue);
@@ -1779,6 +1786,13 @@ static void __usb_hcd_giveback_urb(struc
 
 	usb_anchor_resume_wakeups(anchor);
 	atomic_dec(&urb->use_count);
+	/*
+	 * Order the write of urb->use_count above before the read
+	 * of urb->reject below.  Pairs with the memory barriers in
+	 * usb_kill_urb() and usb_poison_urb().
+	 */
+	smp_mb__after_atomic();
+
 	if (unlikely(atomic_read(&urb->reject)))
 		wake_up(&usb_kill_urb_queue);
 	usb_put_urb(urb);
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -692,6 +692,12 @@ void usb_kill_urb(struct urb *urb)
 	if (!(urb && urb->dev && urb->ep))
 		return;
 	atomic_inc(&urb->reject);
+	/*
+	 * Order the write of urb->reject above before the read
+	 * of urb->use_count below.  Pairs with the barriers in
+	 * __usb_hcd_giveback_urb() and usb_hcd_submit_urb().
+	 */
+	smp_mb__after_atomic();
 
 	usb_hcd_unlink_urb(urb, -ENOENT);
 	wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0);
@@ -733,6 +739,12 @@ void usb_poison_urb(struct urb *urb)
 	if (!urb)
 		return;
 	atomic_inc(&urb->reject);
+	/*
+	 * Order the write of urb->reject above before the read
+	 * of urb->use_count below.  Pairs with the barriers in
+	 * __usb_hcd_giveback_urb() and usb_hcd_submit_urb().
+	 */
+	smp_mb__after_atomic();
 
 	if (!urb->dev || !urb->ep)
 		return;

[PATCH 4.19 17/86] usb: typec: tcpm: Do not disconnect while receiving VBUS off

[Greg Kroah-Hartman]

From: Badhri Jagan Sridharan <badhri@google.com>

commit 90b8aa9f5b09edae6928c0561f933fec9f7a9987 upstream.

With some chargers, vbus might momentarily raise above VSAFE5V and fall
back to 0V before tcpm gets to read port->tcpc->get_vbus. This will
will report a VBUS off event causing TCPM to transition to
SNK_UNATTACHED where it should be waiting in either SNK_ATTACH_WAIT
or SNK_DEBOUNCED state. This patch makes TCPM avoid vbus off events
while in SNK_ATTACH_WAIT or SNK_DEBOUNCED state.

Stub from the spec:
    "4.5.2.2.4.2 Exiting from AttachWait.SNK State
    A Sink shall transition to Unattached.SNK when the state of both
    the CC1 and CC2 pins is SNK.Open for at least tPDDebounce.
    A DRP shall transition to Unattached.SRC when the state of both
    the CC1 and CC2 pins is SNK.Open for at least tPDDebounce."

[23.194131] CC1: 0 -> 0, CC2: 0 -> 5 [state SNK_UNATTACHED, polarity 0, connected]
[23.201777] state change SNK_UNATTACHED -> SNK_ATTACH_WAIT [rev3 NONE_AMS]
[23.209949] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS]
[23.300579] VBUS off
[23.300668] state change SNK_ATTACH_WAIT -> SNK_UNATTACHED [rev3 NONE_AMS]
[23.301014] VBUS VSAFE0V
[23.301111] Start toggling

Fixes: f0690a25a140b8 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable@vger.kernel.org
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20220122015520.332507-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/tcpm.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/typec/tcpm.c
+++ b/drivers/usb/typec/tcpm.c
@@ -3865,7 +3865,8 @@ static void _tcpm_pd_vbus_off(struct tcp
 	case SNK_TRYWAIT_DEBOUNCE:
 		break;
 	case SNK_ATTACH_WAIT:
-		tcpm_set_state(port, SNK_UNATTACHED, 0);
+	case SNK_DEBOUNCED:
+		/* Do nothing, as TCPM is still waiting for vbus to reaach VSAFE5V to connect */
 		break;
 
 	case SNK_NEGOTIATE_CAPABILITIES:

[PATCH 4.19 18/86] net: sfp: ignore disabled SFP node

[Greg Kroah-Hartman]

From: Marek Behún <kabel@kernel.org>

commit 2148927e6ed43a1667baf7c2ae3e0e05a44b51a0 upstream.

Commit ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices
and sfp cages") added code which finds SFP bus DT node even if the node
is disabled with status = "disabled". Because of this, when phylink is
created, it ends with non-null .sfp_bus member, even though the SFP
module is not probed (because the node is disabled).

We need to ignore disabled SFP bus node.

Fixes: ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages")
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org # 2203cbf2c8b5 ("net: sfp: move fwnode parsing into sfp-bus layer")
Signed-off-by: David S. Miller <davem@davemloft.net>
[ backport to 4.19 ]
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/phylink.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -554,6 +554,11 @@ static int phylink_register_sfp(struct p
 		return ret;
 	}
 
+	if (!fwnode_device_is_available(ref.fwnode)) {
+		fwnode_handle_put(ref.fwnode);
+		return 0;
+	}
+
 	pl->sfp_bus = sfp_register_upstream(ref.fwnode, pl->netdev, pl,
 					    &sfp_phylink_ops);
 	if (!pl->sfp_bus)

[PATCH 4.19 19/86] powerpc/32: Fix boot failure with GCC latent entropy plugin

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

commit bba496656a73fc1d1330b49c7f82843836e9feb1 upstream.

Boot fails with GCC latent entropy plugin enabled.

This is due to early boot functions trying to access 'latent_entropy'
global data while the kernel is not relocated at its final
destination yet.

As there is no way to tell GCC to use PTRRELOC() to access it,
disable latent entropy plugin in early_32.o and feature-fixups.o and
code-patching.o

Fixes: 38addce8b600 ("gcc-plugins: Add latent_entropy plugin")
Cc: stable@vger.kernel.org # v4.9+
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215217
Link: https://lore.kernel.org/r/2bac55483b8daf5b1caa163a45fa5f9cdbe18be4.1640178426.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/kernel/Makefile |    1 +
 arch/powerpc/lib/Makefile    |    3 +++
 2 files changed, 4 insertions(+)

--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -15,6 +15,7 @@ CFLAGS_prom_init.o      += -fPIC
 CFLAGS_btext.o		+= -fPIC
 endif
 
+CFLAGS_setup_32.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
 CFLAGS_cputable.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
 CFLAGS_prom_init.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
 CFLAGS_btext.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -10,6 +10,9 @@ ccflags-$(CONFIG_PPC64)	:= $(NO_MINIMAL_
 CFLAGS_REMOVE_code-patching.o = $(CC_FLAGS_FTRACE)
 CFLAGS_REMOVE_feature-fixups.o = $(CC_FLAGS_FTRACE)
 
+CFLAGS_code-patching.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
+CFLAGS_feature-fixups.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
+
 obj-y += string.o alloc.o code-patching.o feature-fixups.o
 
 obj-$(CONFIG_PPC32)	+= div64.o copy_32.o crtsavres.o strlen_32.o

[PATCH 4.19 20/86] i40e: Increase delay to 1 s after global EMP reset

[Greg Kroah-Hartman]

From: Jedrzej Jagielski <jedrzej.jagielski@intel.com>

commit 9b13bd53134c9ddd544a790125199fdbdb505e67 upstream.

Recently simplified i40e_rebuild causes that FW sometimes
is not ready after NVM update, the ping does not return.

Increase the delay in case of EMP reset.
Old delay of 300 ms was introduced for specific cards for 710 series.
Now it works for all the cards and delay was increased.

Fixes: 1fa51a650e1d ("i40e: Add delay after EMP reset for firmware to recover")
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c |   12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -9486,15 +9486,9 @@ static void i40e_rebuild(struct i40e_pf
 	}
 	i40e_get_oem_version(&pf->hw);
 
-	if (test_bit(__I40E_EMP_RESET_INTR_RECEIVED, pf->state) &&
-	    ((hw->aq.fw_maj_ver == 4 && hw->aq.fw_min_ver <= 33) ||
-	     hw->aq.fw_maj_ver < 4) && hw->mac.type == I40E_MAC_XL710) {
-		/* The following delay is necessary for 4.33 firmware and older
-		 * to recover after EMP reset. 200 ms should suffice but we
-		 * put here 300 ms to be sure that FW is ready to operate
-		 * after reset.
-		 */
-		mdelay(300);
+	if (test_and_clear_bit(__I40E_EMP_RESET_INTR_RECEIVED, pf->state)) {
+		/* The following delay is necessary for firmware update. */
+		mdelay(1000);
 	}
 
 	/* re-verify the eeprom if we just had an EMP reset */

[PATCH 4.19 21/86] i40e: Fix issue when maximum queues is exceeded

[Greg Kroah-Hartman]

From: Jedrzej Jagielski <jedrzej.jagielski@intel.com>

commit d701658a50a471591094b3eb3961b4926cc8f104 upstream.

Before this patch VF interface vanished when
maximum queue number was exceeded. Driver tried
to add next queues even if there was not enough
space. PF sent incorrect number of queues to
the VF when there were not enough of them.

Add an additional condition introduced to check
available space in 'qp_pile' before proceeding.
This condition makes it impossible to add queues
if they number is greater than the number resulting
from available space.
Also add the search for free space in PF queue
pair piles.

Without this patch VF interfaces are not seen
when available space for queues has been
exceeded and following logs appears permanently
in dmesg:
"Unable to get VF config (-32)".
"VF 62 failed opcode 3, retval: -5"
"Unable to get VF config due to PF error condition, not retrying"

Fixes: 7daa6bf3294e ("i40e: driver core headers")
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/i40e/i40e.h             |    1 
 drivers/net/ethernet/intel/i40e/i40e_main.c        |   14 ----
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c |   59 +++++++++++++++++++++
 3 files changed, 61 insertions(+), 13 deletions(-)

--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -179,7 +179,6 @@ enum i40e_interrupt_policy {
 
 struct i40e_lump_tracking {
 	u16 num_entries;
-	u16 search_hint;
 	u16 list[0];
 #define I40E_PILE_VALID_BIT  0x8000
 #define I40E_IWARP_IRQ_PILE_ID  (I40E_PILE_VALID_BIT - 2)
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -193,10 +193,6 @@ int i40e_free_virt_mem_d(struct i40e_hw
  * @id: an owner id to stick on the items assigned
  *
  * Returns the base item index of the lump, or negative for error
- *
- * The search_hint trick and lack of advanced fit-finding only work
- * because we're highly likely to have all the same size lump requests.
- * Linear search time and any fragmentation should be minimal.
  **/
 static int i40e_get_lump(struct i40e_pf *pf, struct i40e_lump_tracking *pile,
 			 u16 needed, u16 id)
@@ -211,8 +207,7 @@ static int i40e_get_lump(struct i40e_pf
 		return -EINVAL;
 	}
 
-	/* start the linear search with an imperfect hint */
-	i = pile->search_hint;
+	i = 0;
 	while (i < pile->num_entries) {
 		/* skip already allocated entries */
 		if (pile->list[i] & I40E_PILE_VALID_BIT) {
@@ -231,7 +226,6 @@ static int i40e_get_lump(struct i40e_pf
 			for (j = 0; j < needed; j++)
 				pile->list[i+j] = id | I40E_PILE_VALID_BIT;
 			ret = i;
-			pile->search_hint = i + j;
 			break;
 		}
 
@@ -254,7 +248,7 @@ static int i40e_put_lump(struct i40e_lum
 {
 	int valid_id = (id | I40E_PILE_VALID_BIT);
 	int count = 0;
-	int i;
+	u16 i;
 
 	if (!pile || index >= pile->num_entries)
 		return -EINVAL;
@@ -266,8 +260,6 @@ static int i40e_put_lump(struct i40e_lum
 		count++;
 	}
 
-	if (count && index < pile->search_hint)
-		pile->search_hint = index;
 
 	return count;
 }
@@ -10727,7 +10719,6 @@ static int i40e_init_interrupt_scheme(st
 		return -ENOMEM;
 
 	pf->irq_pile->num_entries = vectors;
-	pf->irq_pile->search_hint = 0;
 
 	/* track first vector for misc interrupts, ignore return */
 	(void)i40e_get_lump(pf, pf->irq_pile, 1, I40E_PILE_VALID_BIT - 1);
@@ -11436,7 +11427,6 @@ static int i40e_sw_init(struct i40e_pf *
 		goto sw_init_done;
 	}
 	pf->qp_pile->num_entries = pf->hw.func_caps.num_tx_qp;
-	pf->qp_pile->search_hint = 0;
 
 	pf->tx_timeout_recovery_level = 1;
 
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -2339,6 +2339,59 @@ error_param:
 }
 
 /**
+ * i40e_check_enough_queue - find big enough queue number
+ * @vf: pointer to the VF info
+ * @needed: the number of items needed
+ *
+ * Returns the base item index of the queue, or negative for error
+ **/
+static int i40e_check_enough_queue(struct i40e_vf *vf, u16 needed)
+{
+	unsigned int  i, cur_queues, more, pool_size;
+	struct i40e_lump_tracking *pile;
+	struct i40e_pf *pf = vf->pf;
+	struct i40e_vsi *vsi;
+
+	vsi = pf->vsi[vf->lan_vsi_idx];
+	cur_queues = vsi->alloc_queue_pairs;
+
+	/* if current allocated queues are enough for need */
+	if (cur_queues >= needed)
+		return vsi->base_queue;
+
+	pile = pf->qp_pile;
+	if (cur_queues > 0) {
+		/* if the allocated queues are not zero
+		 * just check if there are enough queues for more
+		 * behind the allocated queues.
+		 */
+		more = needed - cur_queues;
+		for (i = vsi->base_queue + cur_queues;
+			i < pile->num_entries; i++) {
+			if (pile->list[i] & I40E_PILE_VALID_BIT)
+				break;
+
+			if (more-- == 1)
+				/* there is enough */
+				return vsi->base_queue;
+		}
+	}
+
+	pool_size = 0;
+	for (i = 0; i < pile->num_entries; i++) {
+		if (pile->list[i] & I40E_PILE_VALID_BIT) {
+			pool_size = 0;
+			continue;
+		}
+		if (needed <= ++pool_size)
+			/* there is enough */
+			return i;
+	}
+
+	return -ENOMEM;
+}
+
+/**
  * i40e_vc_request_queues_msg
  * @vf: pointer to the VF info
  * @msg: pointer to the msg buffer
@@ -2377,6 +2430,12 @@ static int i40e_vc_request_queues_msg(st
 			 req_pairs - cur_pairs,
 			 pf->queues_left);
 		vfres->num_queue_pairs = pf->queues_left + cur_pairs;
+	} else if (i40e_check_enough_queue(vf, req_pairs) < 0) {
+		dev_warn(&pf->pdev->dev,
+			 "VF %d requested %d more queues, but there is not enough for it.\n",
+			 vf->vf_id,
+			 req_pairs - cur_pairs);
+		vfres->num_queue_pairs = cur_pairs;
 	} else {
 		/* successful request */
 		vf->num_req_queues = req_pairs;

[PATCH 4.19 22/86] i40e: Fix queues reservation for XDP

[Greg Kroah-Hartman]

From: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>

commit 92947844b8beee988c0ce17082b705c2f75f0742 upstream.

When XDP was configured on a system with large number of CPUs
and X722 NIC there was a call trace with NULL pointer dereference.

i40e 0000:87:00.0: failed to get tracking for 256 queues for VSI 0 err -12
i40e 0000:87:00.0: setup of MAIN VSI failed

BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:i40e_xdp+0xea/0x1b0 [i40e]
Call Trace:
? i40e_reconfig_rss_queues+0x130/0x130 [i40e]
dev_xdp_install+0x61/0xe0
dev_xdp_attach+0x18a/0x4c0
dev_change_xdp_fd+0x1e6/0x220
do_setlink+0x616/0x1030
? ahci_port_stop+0x80/0x80
? ata_qc_issue+0x107/0x1e0
? lock_timer_base+0x61/0x80
? __mod_timer+0x202/0x380
rtnl_setlink+0xe5/0x170
? bpf_lsm_binder_transaction+0x10/0x10
? security_capable+0x36/0x50
rtnetlink_rcv_msg+0x121/0x350
? rtnl_calcit.isra.0+0x100/0x100
netlink_rcv_skb+0x50/0xf0
netlink_unicast+0x1d3/0x2a0
netlink_sendmsg+0x22a/0x440
sock_sendmsg+0x5e/0x60
__sys_sendto+0xf0/0x160
? __sys_getsockname+0x7e/0xc0
? _copy_from_user+0x3c/0x80
? __sys_setsockopt+0xc8/0x1a0
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f83fa7a39e0

This was caused by PF queue pile fragmentation due to
flow director VSI queue being placed right after main VSI.
Because of this main VSI was not able to resize its
queue allocation for XDP resulting in no queues allocated
for main VSI when XDP was turned on.

Fix this by always allocating last queue in PF queue pile
for a flow director VSI.

Fixes: 41c445ff0f48 ("i40e: main driver core")
Fixes: 74608d17fe29 ("i40e: add support for XDP_TX action")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -207,6 +207,20 @@ static int i40e_get_lump(struct i40e_pf
 		return -EINVAL;
 	}
 
+	/* Allocate last queue in the pile for FDIR VSI queue
+	 * so it doesn't fragment the qp_pile
+	 */
+	if (pile == pf->qp_pile && pf->vsi[id]->type == I40E_VSI_FDIR) {
+		if (pile->list[pile->num_entries - 1] & I40E_PILE_VALID_BIT) {
+			dev_err(&pf->pdev->dev,
+				"Cannot allocate queue %d for I40E_VSI_FDIR\n",
+				pile->num_entries - 1);
+			return -ENOMEM;
+		}
+		pile->list[pile->num_entries - 1] = id | I40E_PILE_VALID_BIT;
+		return pile->num_entries - 1;
+	}
+
 	i = 0;
 	while (i < pile->num_entries) {
 		/* skip already allocated entries */

[PATCH 4.19 23/86] i40e: fix unsigned stat widths

[Greg Kroah-Hartman]

From: Joe Damato <jdamato@fastly.com>

commit 3b8428b84539c78fdc8006c17ebd25afd4722d51 upstream.

Change i40e_update_vsi_stats and struct i40e_vsi to use u64 fields to match
the width of the stats counters in struct i40e_rx_queue_stats.

Update debugfs code to use the correct format specifier for u64.

Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/i40e/i40e.h         |    8 ++++----
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c |    2 +-
 drivers/net/ethernet/intel/i40e/i40e_main.c    |    4 ++--
 3 files changed, 7 insertions(+), 7 deletions(-)

--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -708,12 +708,12 @@ struct i40e_vsi {
 	struct rtnl_link_stats64 net_stats_offsets;
 	struct i40e_eth_stats eth_stats;
 	struct i40e_eth_stats eth_stats_offsets;
-	u32 tx_restart;
-	u32 tx_busy;
+	u64 tx_restart;
+	u64 tx_busy;
 	u64 tx_linearize;
 	u64 tx_force_wb;
-	u32 rx_buf_failed;
-	u32 rx_page_failed;
+	u64 rx_buf_failed;
+	u64 rx_page_failed;
 
 	/* These are containers of ring pointers, allocated at run-time */
 	struct i40e_ring **rx_rings;
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -236,7 +236,7 @@ static void i40e_dbg_dump_vsi_seid(struc
 		 (unsigned long int)vsi->net_stats_offsets.rx_compressed,
 		 (unsigned long int)vsi->net_stats_offsets.tx_compressed);
 	dev_info(&pf->pdev->dev,
-		 "    tx_restart = %d, tx_busy = %d, rx_buf_failed = %d, rx_page_failed = %d\n",
+		 "    tx_restart = %llu, tx_busy = %llu, rx_buf_failed = %llu, rx_page_failed = %llu\n",
 		 vsi->tx_restart, vsi->tx_busy,
 		 vsi->rx_buf_failed, vsi->rx_page_failed);
 	rcu_read_lock();
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -791,9 +791,9 @@ static void i40e_update_vsi_stats(struct
 	struct rtnl_link_stats64 *ns;   /* netdev stats */
 	struct i40e_eth_stats *oes;
 	struct i40e_eth_stats *es;     /* device's eth stats */
-	u32 tx_restart, tx_busy;
+	u64 tx_restart, tx_busy;
 	struct i40e_ring *p;
-	u32 rx_page, rx_buf;
+	u64 rx_page, rx_buf;
 	u64 bytes, packets;
 	unsigned int start;
 	u64 tx_linearize;

[PATCH 4.19 24/86] rpmsg: char: Fix race between the release of rpmsg_ctrldev and cdev

[Greg Kroah-Hartman]

From: Sujit Kautkar <sujitka@chromium.org>

commit b7fb2dad571d1e21173c06cef0bced77b323990a upstream.

struct rpmsg_ctrldev contains a struct cdev. The current code frees
the rpmsg_ctrldev struct in rpmsg_ctrldev_release_device(), but the
cdev is a managed object, therefore its release is not predictable
and the rpmsg_ctrldev could be freed before the cdev is entirely
released, as in the backtrace below.

[   93.625603] ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x7c
[   93.636115] WARNING: CPU: 0 PID: 12 at lib/debugobjects.c:488 debug_print_object+0x13c/0x1b0
[   93.644799] Modules linked in: veth xt_cgroup xt_MASQUERADE rfcomm algif_hash algif_skcipher af_alg uinput ip6table_nat fuse uvcvideo videobuf2_vmalloc venus_enc venus_dec videobuf2_dma_contig hci_uart btandroid btqca snd_soc_rt5682_i2c bluetooth qcom_spmi_temp_alarm snd_soc_rt5682v
[   93.715175] CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: G    B             5.4.163-lockdep #26
[   93.723855] Hardware name: Google Lazor (rev3 - 8) with LTE (DT)
[   93.730055] Workqueue: events kobject_delayed_cleanup
[   93.735271] pstate: 60c00009 (nZCv daif +PAN +UAO)
[   93.740216] pc : debug_print_object+0x13c/0x1b0
[   93.744890] lr : debug_print_object+0x13c/0x1b0
[   93.749555] sp : ffffffacf5bc7940
[   93.752978] x29: ffffffacf5bc7940 x28: dfffffd000000000
[   93.758448] x27: ffffffacdb11a800 x26: dfffffd000000000
[   93.763916] x25: ffffffd0734f856c x24: dfffffd000000000
[   93.769389] x23: 0000000000000000 x22: ffffffd0733c35b0
[   93.774860] x21: ffffffd0751994a0 x20: ffffffd075ec27c0
[   93.780338] x19: ffffffd075199100 x18: 00000000000276e0
[   93.785814] x17: 0000000000000000 x16: dfffffd000000000
[   93.791291] x15: ffffffffffffffff x14: 6e6968207473696c
[   93.796768] x13: 0000000000000000 x12: ffffffd075e2b000
[   93.802244] x11: 0000000000000001 x10: 0000000000000000
[   93.807723] x9 : d13400dff1921900 x8 : d13400dff1921900
[   93.813200] x7 : 0000000000000000 x6 : 0000000000000000
[   93.818676] x5 : 0000000000000080 x4 : 0000000000000000
[   93.824152] x3 : ffffffd0732a0fa4 x2 : 0000000000000001
[   93.829628] x1 : ffffffacf5bc7580 x0 : 0000000000000061
[   93.835104] Call trace:
[   93.837644]  debug_print_object+0x13c/0x1b0
[   93.841963]  __debug_check_no_obj_freed+0x25c/0x3c0
[   93.846987]  debug_check_no_obj_freed+0x18/0x20
[   93.851669]  slab_free_freelist_hook+0xbc/0x1e4
[   93.856346]  kfree+0xfc/0x2f4
[   93.859416]  rpmsg_ctrldev_release_device+0x78/0xb8
[   93.864445]  device_release+0x84/0x168
[   93.868310]  kobject_cleanup+0x12c/0x298
[   93.872356]  kobject_delayed_cleanup+0x10/0x18
[   93.876948]  process_one_work+0x578/0x92c
[   93.881086]  worker_thread+0x804/0xcf8
[   93.884963]  kthread+0x2a8/0x314
[   93.888303]  ret_from_fork+0x10/0x18

The cdev_device_add/del() API was created to address this issue (see
commit '233ed09d7fda ("chardev: add helper function to register char
devs with a struct device")'), use it instead of cdev add/del().

Fixes: c0cdc19f84a4 ("rpmsg: Driver for user space endpoint interface")
Signed-off-by: Sujit Kautkar <sujitka@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220110104706.v6.1.Iaac908f3e3149a89190ce006ba166e2d3fd247a3@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rpmsg/rpmsg_char.c |   11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

--- a/drivers/rpmsg/rpmsg_char.c
+++ b/drivers/rpmsg/rpmsg_char.c
@@ -455,7 +455,6 @@ static void rpmsg_ctrldev_release_device
 
 	ida_simple_remove(&rpmsg_ctrl_ida, dev->id);
 	ida_simple_remove(&rpmsg_minor_ida, MINOR(dev->devt));
-	cdev_del(&ctrldev->cdev);
 	kfree(ctrldev);
 }
 
@@ -490,19 +489,13 @@ static int rpmsg_chrdev_probe(struct rpm
 	dev->id = ret;
 	dev_set_name(&ctrldev->dev, "rpmsg_ctrl%d", ret);
 
-	ret = cdev_add(&ctrldev->cdev, dev->devt, 1);
+	ret = cdev_device_add(&ctrldev->cdev, &ctrldev->dev);
 	if (ret)
 		goto free_ctrl_ida;
 
 	/* We can now rely on the release function for cleanup */
 	dev->release = rpmsg_ctrldev_release_device;
 
-	ret = device_add(dev);
-	if (ret) {
-		dev_err(&rpdev->dev, "device_add failed: %d\n", ret);
-		put_device(dev);
-	}
-
 	dev_set_drvdata(&rpdev->dev, ctrldev);
 
 	return ret;
@@ -528,7 +521,7 @@ static void rpmsg_chrdev_remove(struct r
 	if (ret)
 		dev_warn(&rpdev->dev, "failed to nuke endpoints: %d\n", ret);
 
-	device_del(&ctrldev->dev);
+	cdev_device_del(&ctrldev->cdev, &ctrldev->dev);
 	put_device(&ctrldev->dev);
 }
 

[PATCH 4.19 25/86] rpmsg: char: Fix race between the release of rpmsg_eptdev and cdev

[Greg Kroah-Hartman]

From: Matthias Kaehlcke <mka@chromium.org>

commit 7a534ae89e34e9b51acb5a63dd0f88308178b46a upstream.

struct rpmsg_eptdev contains a struct cdev. The current code frees
the rpmsg_eptdev struct in rpmsg_eptdev_destroy(), but the cdev is
a managed object, therefore its release is not predictable and the
rpmsg_eptdev could be freed before the cdev is entirely released.

The cdev_device_add/del() API was created to address this issue
(see commit '233ed09d7fda ("chardev: add helper function to register
char devs with a struct device")'), use it instead of cdev add/del().

Fixes: c0cdc19f84a4 ("rpmsg: Driver for user space endpoint interface")
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220110104706.v6.2.Idde68b05b88d4a2e6e54766c653f3a6d9e419ce6@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rpmsg/rpmsg_char.c |   11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

--- a/drivers/rpmsg/rpmsg_char.c
+++ b/drivers/rpmsg/rpmsg_char.c
@@ -92,7 +92,7 @@ static int rpmsg_eptdev_destroy(struct d
 	/* wake up any blocked readers */
 	wake_up_interruptible(&eptdev->readq);
 
-	device_del(&eptdev->dev);
+	cdev_device_del(&eptdev->cdev, &eptdev->dev);
 	put_device(&eptdev->dev);
 
 	return 0;
@@ -329,7 +329,6 @@ static void rpmsg_eptdev_release_device(
 
 	ida_simple_remove(&rpmsg_ept_ida, dev->id);
 	ida_simple_remove(&rpmsg_minor_ida, MINOR(eptdev->dev.devt));
-	cdev_del(&eptdev->cdev);
 	kfree(eptdev);
 }
 
@@ -374,19 +373,13 @@ static int rpmsg_eptdev_create(struct rp
 	dev->id = ret;
 	dev_set_name(dev, "rpmsg%d", ret);
 
-	ret = cdev_add(&eptdev->cdev, dev->devt, 1);
+	ret = cdev_device_add(&eptdev->cdev, &eptdev->dev);
 	if (ret)
 		goto free_ept_ida;
 
 	/* We can now rely on the release function for cleanup */
 	dev->release = rpmsg_eptdev_release_device;
 
-	ret = device_add(dev);
-	if (ret) {
-		dev_err(dev, "device_add failed: %d\n", ret);
-		put_device(dev);
-	}
-
 	return ret;
 
 free_ept_ida:

[PATCH 4.19 26/86] scsi: bnx2fc: Flush destroy_work queue before calling bnx2fc_interface_put()

[Greg Kroah-Hartman]

From: John Meneghini <jmeneghi@redhat.com>

commit 847f9ea4c5186fdb7b84297e3eeed9e340e83fce upstream.

The bnx2fc_destroy() functions are removing the interface before calling
destroy_work. This results multiple WARNings from sysfs_remove_group() as
the controller rport device attributes are removed too early.

Replace the fcoe_port's destroy_work queue. It's not needed.

The problem is easily reproducible with the following steps.

Example:

  $ dmesg -w &
  $ systemctl enable --now fcoe
  $ fipvlan -s -c ens2f1
  $ fcoeadm -d ens2f1.802
  [  583.464488] host2: libfc: Link down on port (7500a1)
  [  583.472651] bnx2fc: 7500a1 - rport not created Yet!!
  [  583.490468] ------------[ cut here ]------------
  [  583.538725] sysfs group 'power' not found for kobject 'rport-2:0-0'
  [  583.568814] WARNING: CPU: 3 PID: 192 at fs/sysfs/group.c:279 sysfs_remove_group+0x6f/0x80
  [  583.607130] Modules linked in: dm_service_time 8021q garp mrp stp llc bnx2fc cnic uio rpcsec_gss_krb5 auth_rpcgss nfsv4 ...
  [  583.942994] CPU: 3 PID: 192 Comm: kworker/3:2 Kdump: loaded Not tainted 5.14.0-39.el9.x86_64 #1
  [  583.984105] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013
  [  584.016535] Workqueue: fc_wq_2 fc_rport_final_delete [scsi_transport_fc]
  [  584.050691] RIP: 0010:sysfs_remove_group+0x6f/0x80
  [  584.074725] Code: ff 5b 48 89 ef 5d 41 5c e9 ee c0 ff ff 48 89 ef e8 f6 b8 ff ff eb d1 49 8b 14 24 48 8b 33 48 c7 c7 ...
  [  584.162586] RSP: 0018:ffffb567c15afdc0 EFLAGS: 00010282
  [  584.188225] RAX: 0000000000000000 RBX: ffffffff8eec4220 RCX: 0000000000000000
  [  584.221053] RDX: ffff8c1586ce84c0 RSI: ffff8c1586cd7cc0 RDI: ffff8c1586cd7cc0
  [  584.255089] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb567c15afc00
  [  584.287954] R10: ffffb567c15afbf8 R11: ffffffff8fbe7f28 R12: ffff8c1486326400
  [  584.322356] R13: ffff8c1486326480 R14: ffff8c1483a4a000 R15: 0000000000000004
  [  584.355379] FS:  0000000000000000(0000) GS:ffff8c1586cc0000(0000) knlGS:0000000000000000
  [  584.394419] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [  584.421123] CR2: 00007fe95a6f7840 CR3: 0000000107674002 CR4: 00000000000606e0
  [  584.454888] Call Trace:
  [  584.466108]  device_del+0xb2/0x3e0
  [  584.481701]  device_unregister+0x13/0x60
  [  584.501306]  bsg_unregister_queue+0x5b/0x80
  [  584.522029]  bsg_remove_queue+0x1c/0x40
  [  584.541884]  fc_rport_final_delete+0xf3/0x1d0 [scsi_transport_fc]
  [  584.573823]  process_one_work+0x1e3/0x3b0
  [  584.592396]  worker_thread+0x50/0x3b0
  [  584.609256]  ? rescuer_thread+0x370/0x370
  [  584.628877]  kthread+0x149/0x170
  [  584.643673]  ? set_kthread_struct+0x40/0x40
  [  584.662909]  ret_from_fork+0x22/0x30
  [  584.680002] ---[ end trace 53575ecefa942ece ]---

Link: https://lore.kernel.org/r/20220115040044.1013475-1-jmeneghi@redhat.com
Fixes: 0cbf32e1681d ("[SCSI] bnx2fc: Avoid calling bnx2fc_if_destroy with unnecessary locks")
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Co-developed-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c |   20 +++++---------------
 1 file changed, 5 insertions(+), 15 deletions(-)

--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -80,7 +80,7 @@ static int bnx2fc_bind_pcidev(struct bnx
 static void bnx2fc_unbind_pcidev(struct bnx2fc_hba *hba);
 static struct fc_lport *bnx2fc_if_create(struct bnx2fc_interface *interface,
 				  struct device *parent, int npiv);
-static void bnx2fc_destroy_work(struct work_struct *work);
+static void bnx2fc_port_destroy(struct fcoe_port *port);
 
 static struct bnx2fc_hba *bnx2fc_hba_lookup(struct net_device *phys_dev);
 static struct bnx2fc_interface *bnx2fc_interface_lookup(struct net_device
@@ -911,9 +911,6 @@ static void bnx2fc_indicate_netevent(voi
 				__bnx2fc_destroy(interface);
 		}
 		mutex_unlock(&bnx2fc_dev_lock);
-
-		/* Ensure ALL destroy work has been completed before return */
-		flush_workqueue(bnx2fc_wq);
 		return;
 
 	default:
@@ -1220,8 +1217,8 @@ static int bnx2fc_vport_destroy(struct f
 	mutex_unlock(&n_port->lp_mutex);
 	bnx2fc_free_vport(interface->hba, port->lport);
 	bnx2fc_port_shutdown(port->lport);
+	bnx2fc_port_destroy(port);
 	bnx2fc_interface_put(interface);
-	queue_work(bnx2fc_wq, &port->destroy_work);
 	return 0;
 }
 
@@ -1530,7 +1527,6 @@ static struct fc_lport *bnx2fc_if_create
 	port->lport = lport;
 	port->priv = interface;
 	port->get_netdev = bnx2fc_netdev;
-	INIT_WORK(&port->destroy_work, bnx2fc_destroy_work);
 
 	/* Configure fcoe_port */
 	rc = bnx2fc_lport_config(lport);
@@ -1658,8 +1654,8 @@ static void __bnx2fc_destroy(struct bnx2
 	bnx2fc_interface_cleanup(interface);
 	bnx2fc_stop(interface);
 	list_del(&interface->list);
+	bnx2fc_port_destroy(port);
 	bnx2fc_interface_put(interface);
-	queue_work(bnx2fc_wq, &port->destroy_work);
 }
 
 /**
@@ -1700,15 +1696,12 @@ netdev_err:
 	return rc;
 }
 
-static void bnx2fc_destroy_work(struct work_struct *work)
+static void bnx2fc_port_destroy(struct fcoe_port *port)
 {
-	struct fcoe_port *port;
 	struct fc_lport *lport;
 
-	port = container_of(work, struct fcoe_port, destroy_work);
 	lport = port->lport;
-
-	BNX2FC_HBA_DBG(lport, "Entered bnx2fc_destroy_work\n");
+	BNX2FC_HBA_DBG(lport, "Entered %s, destroying lport %p\n", __func__, lport);
 
 	bnx2fc_if_destroy(lport);
 }
@@ -2562,9 +2555,6 @@ static void bnx2fc_ulp_exit(struct cnic_
 			__bnx2fc_destroy(interface);
 	mutex_unlock(&bnx2fc_dev_lock);
 
-	/* Ensure ALL destroy work has been completed before return */
-	flush_workqueue(bnx2fc_wq);
-
 	bnx2fc_ulp_stop(hba);
 	/* unregister cnic device */
 	if (test_and_clear_bit(BNX2FC_CNIC_REGISTERED, &hba->reg_with_cnic))

[PATCH 4.19 27/86] ipv6_tunnel: Rate limit warning messages

[Greg Kroah-Hartman]

From: Ido Schimmel <idosch@nvidia.com>

commit 6cee105e7f2ced596373951d9ea08dacc3883c68 upstream.

The warning messages can be invoked from the data path for every packet
transmitted through an ip6gre netdev, leading to high CPU utilization.

Fix that by rate limiting the messages.

Fixes: 09c6bbf090ec ("[IPV6]: Do mandatory IPv6 tunnel endpoint checks in realtime")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Tested-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/ip6_tunnel.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -1005,14 +1005,14 @@ int ip6_tnl_xmit_ctl(struct ip6_tnl *t,
 
 		if (unlikely(!ipv6_chk_addr_and_flags(net, laddr, ldev, false,
 						      0, IFA_F_TENTATIVE)))
-			pr_warn("%s xmit: Local address not yet configured!\n",
-				p->name);
+			pr_warn_ratelimited("%s xmit: Local address not yet configured!\n",
+					    p->name);
 		else if (!(p->flags & IP6_TNL_F_ALLOW_LOCAL_REMOTE) &&
 			 !ipv6_addr_is_multicast(raddr) &&
 			 unlikely(ipv6_chk_addr_and_flags(net, raddr, ldev,
 							  true, 0, IFA_F_TENTATIVE)))
-			pr_warn("%s xmit: Routing loop! Remote address found on this node!\n",
-				p->name);
+			pr_warn_ratelimited("%s xmit: Routing loop! Remote address found on this node!\n",
+					    p->name);
 		else
 			ret = 1;
 		rcu_read_unlock();

[PATCH 4.19 28/86] net: fix information leakage in /proc/net/ptype

[Greg Kroah-Hartman]

From: Congyu Liu <liu3101@purdue.edu>

commit 47934e06b65637c88a762d9c98329ae6e3238888 upstream.

In one net namespace, after creating a packet socket without binding
it to a device, users in other net namespaces can observe the new
`packet_type` added by this packet socket by reading `/proc/net/ptype`
file. This is minor information leakage as packet socket is
namespace aware.

Add a net pointer in `packet_type` to keep the net namespace of
of corresponding packet socket. In `ptype_seq_show`, this net pointer
must be checked when it is not NULL.

Fixes: 2feb27dbe00c ("[NETNS]: Minor information leak via /proc/net/ptype file.")
Signed-off-by: Congyu Liu <liu3101@purdue.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/netdevice.h |    1 +
 net/core/net-procfs.c     |    3 ++-
 net/packet/af_packet.c    |    2 ++
 3 files changed, 5 insertions(+), 1 deletion(-)

--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2346,6 +2346,7 @@ struct packet_type {
 					      struct net_device *);
 	bool			(*id_match)(struct packet_type *ptype,
 					    struct sock *sk);
+	struct net		*af_packet_net;
 	void			*af_packet_priv;
 	struct list_head	list;
 };
--- a/net/core/net-procfs.c
+++ b/net/core/net-procfs.c
@@ -252,7 +252,8 @@ static int ptype_seq_show(struct seq_fil
 
 	if (v == SEQ_START_TOKEN)
 		seq_puts(seq, "Type Device      Function\n");
-	else if (pt->dev == NULL || dev_net(pt->dev) == seq_file_net(seq)) {
+	else if ((!pt->af_packet_net || net_eq(pt->af_packet_net, seq_file_net(seq))) &&
+		 (!pt->dev || net_eq(dev_net(pt->dev), seq_file_net(seq)))) {
 		if (pt->type == htons(ETH_P_ALL))
 			seq_puts(seq, "ALL ");
 		else
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1716,6 +1716,7 @@ static int fanout_add(struct sock *sk, u
 		match->prot_hook.dev = po->prot_hook.dev;
 		match->prot_hook.func = packet_rcv_fanout;
 		match->prot_hook.af_packet_priv = match;
+		match->prot_hook.af_packet_net = read_pnet(&match->net);
 		match->prot_hook.id_match = match_fanout_group;
 		list_add(&match->list, &fanout_list);
 	}
@@ -3294,6 +3295,7 @@ static int packet_create(struct net *net
 		po->prot_hook.func = packet_rcv_spkt;
 
 	po->prot_hook.af_packet_priv = sk;
+	po->prot_hook.af_packet_net = sock_net(sk);
 
 	if (proto) {
 		po->prot_hook.type = proto;

[PATCH 4.19 29/86] ping: fix the sk_bound_dev_if match in ping_lookup

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

commit 2afc3b5a31f9edf3ef0f374f5d70610c79c93a42 upstream.

When 'ping' changes to use PING socket instead of RAW socket by:

   # sysctl -w net.ipv4.ping_group_range="0 100"

the selftests 'router_broadcast.sh' will fail, as such command

  # ip vrf exec vrf-h1 ping -I veth0 198.51.100.255 -b

can't receive the response skb by the PING socket. It's caused by mismatch
of sk_bound_dev_if and dif in ping_rcv() when looking up the PING socket,
as dif is vrf-h1 if dif's master was set to vrf-h1.

This patch is to fix this regression by also checking the sk_bound_dev_if
against sdif so that the packets can stil be received even if the socket
is not bound to the vrf device but to the real iif.

Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ping.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/ipv4/ping.c
+++ b/net/ipv4/ping.c
@@ -225,7 +225,8 @@ static struct sock *ping_lookup(struct n
 			continue;
 		}
 
-		if (sk->sk_bound_dev_if && sk->sk_bound_dev_if != dif)
+		if (sk->sk_bound_dev_if && sk->sk_bound_dev_if != dif &&
+		    sk->sk_bound_dev_if != inet_sdif(skb))
 			continue;
 
 		sock_hold(sk);

[PATCH 4.19 30/86] ipv4: avoid using shared IP generator for connected sockets

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit 23f57406b82de51809d5812afd96f210f8b627f3 upstream.

ip_select_ident_segs() has been very conservative about using
the connected socket private generator only for packets with IP_DF
set, claiming it was needed for some VJ compression implementations.

As mentioned in this referenced document, this can be abused.
(Ref: Off-Path TCP Exploits of the Mixed IPID Assignment)

Before switching to pure random IPID generation and possibly hurt
some workloads, lets use the private inet socket generator.

Not only this will remove one vulnerability, this will also
improve performance of TCP flows using pmtudisc==IP_PMTUDISC_DONT

Fixes: 73f156a6e8c1 ("inetpeer: get rid of ip_id_count")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reported-by: Ray Che <xijiache@gmail.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/ip.h |   21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -441,19 +441,18 @@ static inline void ip_select_ident_segs(
 {
 	struct iphdr *iph = ip_hdr(skb);
 
+	/* We had many attacks based on IPID, use the private
+	 * generator as much as we can.
+	 */
+	if (sk && inet_sk(sk)->inet_daddr) {
+		iph->id = htons(inet_sk(sk)->inet_id);
+		inet_sk(sk)->inet_id += segs;
+		return;
+	}
 	if ((iph->frag_off & htons(IP_DF)) && !skb->ignore_df) {
-		/* This is only to work around buggy Windows95/2000
-		 * VJ compression implementations.  If the ID field
-		 * does not change, they drop every other packet in
-		 * a TCP stream using header compression.
-		 */
-		if (sk && inet_sk(sk)->inet_daddr) {
-			iph->id = htons(inet_sk(sk)->inet_id);
-			inet_sk(sk)->inet_id += segs;
-		} else {
-			iph->id = 0;
-		}
+		iph->id = 0;
 	} else {
+		/* Unfortunately we need the big hammer to get a suitable IPID */
 		__ip_select_ident(net, iph, segs);
 	}
 }

[PATCH 4.19 31/86] hwmon: (lm90) Reduce maximum conversion rate for G781

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit a66c5ed539277b9f2363bbace0dba88b85b36c26 ]

According to its datasheet, G781 supports a maximum conversion rate value
of 8 (62.5 ms). However, chips labeled G781 and G780 were found to only
support a maximum conversion rate value of 7 (125 ms). On the other side,
chips labeled G781-1 and G784 were found to support a conversion rate value
of 8. There is no known means to distinguish G780 from G781 or G784; all
chips report the same manufacturer ID and chip revision.
Setting the conversion rate register value to 8 on chips not supporting
it causes unexpected behavior since the real conversion rate is set to 0
(16 seconds) if a value of 8 is written into the conversion rate register.
Limit the conversion rate register value to 7 for all G78x chips to avoid
the problem.

Fixes: ae544f64cc7b ("hwmon: (lm90) Add support for GMT G781")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/lm90.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -359,7 +359,7 @@ static const struct lm90_params lm90_par
 		.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
 		  | LM90_HAVE_BROKEN_ALERT,
 		.alert_alarms = 0x7c,
-		.max_convrate = 8,
+		.max_convrate = 7,
 	},
 	[lm86] = {
 		.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT,

[PATCH 4.19 32/86] NFSv4: Handle case where the lookup of a directory fails

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

commit ac795161c93699d600db16c1a8cc23a65a1eceaf upstream.

If the application sets the O_DIRECTORY flag, and tries to open a
regular file, nfs_atomic_open() will punt to doing a regular lookup.
If the server then returns a regular file, we will happily return a
file descriptor with uninitialised open state.

The fix is to return the expected ENOTDIR error in these cases.

Reported-by: Lyu Tao <tao.lyu@epfl.ch>
Fixes: 0dd2b474d0b6 ("nfs: implement i_op->atomic_open()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs/dir.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1626,6 +1626,19 @@ out:
 
 no_open:
 	res = nfs_lookup(dir, dentry, lookup_flags);
+	if (!res) {
+		inode = d_inode(dentry);
+		if ((lookup_flags & LOOKUP_DIRECTORY) && inode &&
+		    !S_ISDIR(inode->i_mode))
+			res = ERR_PTR(-ENOTDIR);
+	} else if (!IS_ERR(res)) {
+		inode = d_inode(res);
+		if ((lookup_flags & LOOKUP_DIRECTORY) && inode &&
+		    !S_ISDIR(inode->i_mode)) {
+			dput(res);
+			res = ERR_PTR(-ENOTDIR);
+		}
+	}
 	if (switched) {
 		d_lookup_done(dentry);
 		if (!res)

[PATCH 4.19 33/86] NFSv4: nfs_atomic_open() can race when looking up a non-regular file

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

commit 1751fc1db36f6f411709e143d5393f92d12137a9 upstream.

If the file type changes back to being a regular file on the server
between the failed OPEN and our LOOKUP, then we need to re-run the OPEN.

Fixes: 0dd2b474d0b6 ("nfs: implement i_op->atomic_open()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs/dir.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1631,12 +1631,17 @@ no_open:
 		if ((lookup_flags & LOOKUP_DIRECTORY) && inode &&
 		    !S_ISDIR(inode->i_mode))
 			res = ERR_PTR(-ENOTDIR);
+		else if (inode && S_ISREG(inode->i_mode))
+			res = ERR_PTR(-EOPENSTALE);
 	} else if (!IS_ERR(res)) {
 		inode = d_inode(res);
 		if ((lookup_flags & LOOKUP_DIRECTORY) && inode &&
 		    !S_ISDIR(inode->i_mode)) {
 			dput(res);
 			res = ERR_PTR(-ENOTDIR);
+		} else if (inode && S_ISREG(inode->i_mode)) {
+			dput(res);
+			res = ERR_PTR(-EOPENSTALE);
 		}
 	}
 	if (switched) {

[PATCH 4.19 34/86] net-procfs: show net devices bound packet types

[Greg Kroah-Hartman]

From: Jianguo Wu <wujianguo@chinatelecom.cn>

commit 1d10f8a1f40b965d449e8f2d5ed7b96a7c138b77 upstream.

After commit:7866a621043f ("dev: add per net_device packet type chains"),
we can not get packet types that are bound to a specified net device by
/proc/net/ptype, this patch fix the regression.

Run "tcpdump -i ens192 udp -nns0" Before and after apply this patch:

Before:
  [root@localhost ~]# cat /proc/net/ptype
  Type Device      Function
  0800          ip_rcv
  0806          arp_rcv
  86dd          ipv6_rcv

After:
  [root@localhost ~]# cat /proc/net/ptype
  Type Device      Function
  ALL  ens192   tpacket_rcv
  0800          ip_rcv
  0806          arp_rcv
  86dd          ipv6_rcv

v1 -> v2:
  - fix the regression rather than adding new /proc API as
    suggested by Stephen Hemminger.

Fixes: 7866a621043f ("dev: add per net_device packet type chains")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/net-procfs.c |   35 ++++++++++++++++++++++++++++++++---
 1 file changed, 32 insertions(+), 3 deletions(-)

--- a/net/core/net-procfs.c
+++ b/net/core/net-procfs.c
@@ -182,12 +182,23 @@ static const struct seq_operations softn
 	.show  = softnet_seq_show,
 };
 
-static void *ptype_get_idx(loff_t pos)
+static void *ptype_get_idx(struct seq_file *seq, loff_t pos)
 {
+	struct list_head *ptype_list = NULL;
 	struct packet_type *pt = NULL;
+	struct net_device *dev;
 	loff_t i = 0;
 	int t;
 
+	for_each_netdev_rcu(seq_file_net(seq), dev) {
+		ptype_list = &dev->ptype_all;
+		list_for_each_entry_rcu(pt, ptype_list, list) {
+			if (i == pos)
+				return pt;
+			++i;
+		}
+	}
+
 	list_for_each_entry_rcu(pt, &ptype_all, list) {
 		if (i == pos)
 			return pt;
@@ -208,22 +219,40 @@ static void *ptype_seq_start(struct seq_
 	__acquires(RCU)
 {
 	rcu_read_lock();
-	return *pos ? ptype_get_idx(*pos - 1) : SEQ_START_TOKEN;
+	return *pos ? ptype_get_idx(seq, *pos - 1) : SEQ_START_TOKEN;
 }
 
 static void *ptype_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 {
+	struct net_device *dev;
 	struct packet_type *pt;
 	struct list_head *nxt;
 	int hash;
 
 	++*pos;
 	if (v == SEQ_START_TOKEN)
-		return ptype_get_idx(0);
+		return ptype_get_idx(seq, 0);
 
 	pt = v;
 	nxt = pt->list.next;
+	if (pt->dev) {
+		if (nxt != &pt->dev->ptype_all)
+			goto found;
+
+		dev = pt->dev;
+		for_each_netdev_continue_rcu(seq_file_net(seq), dev) {
+			if (!list_empty(&dev->ptype_all)) {
+				nxt = dev->ptype_all.next;
+				goto found;
+			}
+		}
+
+		nxt = ptype_all.next;
+		goto ptype_all;
+	}
+
 	if (pt->type == htons(ETH_P_ALL)) {
+ptype_all:
 		if (nxt != &ptype_all)
 			goto found;
 		hash = 0;

[PATCH 4.19 35/86] drm/msm: Fix wrong size calculation

[Greg Kroah-Hartman]

From: Xianting Tian <xianting.tian@linux.alibaba.com>

commit 0a727b459ee39bd4c5ced19d6024258ac87b6b2e upstream.

For example, memory-region in .dts as below,
	reg = <0x0 0x50000000 0x0 0x20000000>

We can get below values,
struct resource r;
r.start = 0x50000000;
r.end	= 0x6fffffff;

So the size should be:
size = r.end - r.start + 1 = 0x20000000

Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Fixes: 072f1f9168ed ("drm/msm: add support for "stolen" mem")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220112123334.749776-1-xianting.tian@linux.alibaba.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_drv.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -388,7 +388,7 @@ static int msm_init_vram(struct drm_devi
 		of_node_put(node);
 		if (ret)
 			return ret;
-		size = r.end - r.start;
+		size = r.end - r.start + 1;
 		DRM_INFO("using VRAM carveout: %lx@%pa\n", size, &r.start);
 
 		/* if we have no IOMMU, then we need to use carveout allocator.

[PATCH 4.19 36/86] drm/msm/dsi: invalid parameter check in msm_dsi_phy_enable

[Greg Kroah-Hartman]

From: José Expósito <jose.exposito89@gmail.com>

commit 5e761a2287234bc402ba7ef07129f5103bcd775c upstream.

The function performs a check on the "phy" input parameter, however, it
is used before the check.

Initialize the "dev" variable after the sanity check to avoid a possible
NULL pointer dereference.

Fixes: 5c8290284402b ("drm/msm/dsi: Split PHY drivers to separate files")
Addresses-Coverity-ID: 1493860 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220116181844.7400-1-jose.exposito89@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -667,12 +667,14 @@ void __exit msm_dsi_phy_driver_unregiste
 int msm_dsi_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
 			struct msm_dsi_phy_clk_request *clk_req)
 {
-	struct device *dev = &phy->pdev->dev;
+	struct device *dev;
 	int ret;
 
 	if (!phy || !phy->cfg->ops.enable)
 		return -EINVAL;
 
+	dev = &phy->pdev->dev;
+
 	ret = dsi_phy_enable_resource(phy);
 	if (ret) {
 		dev_err(dev, "%s: resource enable failed, %d\n",

[PATCH 4.19 37/86] ipv6: annotate accesses to fn->fn_sernum

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit aafc2e3285c2d7a79b7ee15221c19fbeca7b1509 upstream.

struct fib6_node's fn_sernum field can be
read while other threads change it.

Add READ_ONCE()/WRITE_ONCE() annotations.

Do not change existing smp barriers in fib6_get_cookie_safe()
and __fib6_update_sernum_upto_root()

syzbot reported:

BUG: KCSAN: data-race in fib6_clean_node / inet6_csk_route_socket

write to 0xffff88813df62e2c of 4 bytes by task 1920 on cpu 1:
 fib6_clean_node+0xc2/0x260 net/ipv6/ip6_fib.c:2178
 fib6_walk_continue+0x38e/0x430 net/ipv6/ip6_fib.c:2112
 fib6_walk net/ipv6/ip6_fib.c:2160 [inline]
 fib6_clean_tree net/ipv6/ip6_fib.c:2240 [inline]
 __fib6_clean_all+0x1a9/0x2e0 net/ipv6/ip6_fib.c:2256
 fib6_flush_trees+0x6c/0x80 net/ipv6/ip6_fib.c:2281
 rt_genid_bump_ipv6 include/net/net_namespace.h:488 [inline]
 addrconf_dad_completed+0x57f/0x870 net/ipv6/addrconf.c:4230
 addrconf_dad_work+0x908/0x1170
 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
 worker_thread+0x616/0xa70 kernel/workqueue.c:2454
 kthread+0x1bf/0x1e0 kernel/kthread.c:359
 ret_from_fork+0x1f/0x30

read to 0xffff88813df62e2c of 4 bytes by task 15701 on cpu 0:
 fib6_get_cookie_safe include/net/ip6_fib.h:285 [inline]
 rt6_get_cookie include/net/ip6_fib.h:306 [inline]
 ip6_dst_store include/net/ip6_route.h:234 [inline]
 inet6_csk_route_socket+0x352/0x3c0 net/ipv6/inet6_connection_sock.c:109
 inet6_csk_xmit+0x91/0x1e0 net/ipv6/inet6_connection_sock.c:121
 __tcp_transmit_skb+0x1323/0x1840 net/ipv4/tcp_output.c:1402
 tcp_transmit_skb net/ipv4/tcp_output.c:1420 [inline]
 tcp_write_xmit+0x1450/0x4460 net/ipv4/tcp_output.c:2680
 __tcp_push_pending_frames+0x68/0x1c0 net/ipv4/tcp_output.c:2864
 tcp_push+0x2d9/0x2f0 net/ipv4/tcp.c:725
 mptcp_push_release net/mptcp/protocol.c:1491 [inline]
 __mptcp_push_pending+0x46c/0x490 net/mptcp/protocol.c:1578
 mptcp_sendmsg+0x9ec/0xa50 net/mptcp/protocol.c:1764
 inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:643
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg net/socket.c:725 [inline]
 kernel_sendmsg+0x97/0xd0 net/socket.c:745
 sock_no_sendpage+0x84/0xb0 net/core/sock.c:3086
 inet_sendpage+0x9d/0xc0 net/ipv4/af_inet.c:834
 kernel_sendpage+0x187/0x200 net/socket.c:3492
 sock_sendpage+0x5a/0x70 net/socket.c:1007
 pipe_to_sendpage+0x128/0x160 fs/splice.c:364
 splice_from_pipe_feed fs/splice.c:418 [inline]
 __splice_from_pipe+0x207/0x500 fs/splice.c:562
 splice_from_pipe fs/splice.c:597 [inline]
 generic_splice_sendpage+0x94/0xd0 fs/splice.c:746
 do_splice_from fs/splice.c:767 [inline]
 direct_splice_actor+0x80/0xa0 fs/splice.c:936
 splice_direct_to_actor+0x345/0x650 fs/splice.c:891
 do_splice_direct+0x106/0x190 fs/splice.c:979
 do_sendfile+0x675/0xc40 fs/read_write.c:1245
 __do_sys_sendfile64 fs/read_write.c:1310 [inline]
 __se_sys_sendfile64 fs/read_write.c:1296 [inline]
 __x64_sys_sendfile64+0x102/0x140 fs/read_write.c:1296
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x0000026f -> 0x00000271

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 15701 Comm: syz-executor.2 Not tainted 5.16.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

The Fixes tag I chose is probably arbitrary, I do not think
we need to backport this patch to older kernels.

Fixes: c5cff8561d2d ("ipv6: add rcu grace period before freeing fib6_node")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220120174112.1126644-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/ip6_fib.h |    2 +-
 net/ipv6/ip6_fib.c    |   23 +++++++++++++----------
 net/ipv6/route.c      |    2 +-
 3 files changed, 15 insertions(+), 12 deletions(-)

--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -243,7 +243,7 @@ static inline bool fib6_get_cookie_safe(
 	fn = rcu_dereference(f6i->fib6_node);
 
 	if (fn) {
-		*cookie = fn->fn_sernum;
+		*cookie = READ_ONCE(fn->fn_sernum);
 		/* pairs with smp_wmb() in fib6_update_sernum_upto_root() */
 		smp_rmb();
 		status = true;
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -112,7 +112,7 @@ void fib6_update_sernum(struct net *net,
 	fn = rcu_dereference_protected(f6i->fib6_node,
 			lockdep_is_held(&f6i->fib6_table->tb6_lock));
 	if (fn)
-		fn->fn_sernum = fib6_new_sernum(net);
+		WRITE_ONCE(fn->fn_sernum, fib6_new_sernum(net));
 }
 
 /*
@@ -544,12 +544,13 @@ static int fib6_dump_table(struct fib6_t
 		spin_unlock_bh(&table->tb6_lock);
 		if (res > 0) {
 			cb->args[4] = 1;
-			cb->args[5] = w->root->fn_sernum;
+			cb->args[5] = READ_ONCE(w->root->fn_sernum);
 		}
 	} else {
-		if (cb->args[5] != w->root->fn_sernum) {
+		int sernum = READ_ONCE(w->root->fn_sernum);
+		if (cb->args[5] != sernum) {
 			/* Begin at the root if the tree changed */
-			cb->args[5] = w->root->fn_sernum;
+			cb->args[5] = sernum;
 			w->state = FWS_INIT;
 			w->node = w->root;
 			w->skip = w->count;
@@ -1203,7 +1204,7 @@ static void __fib6_update_sernum_upto_ro
 	/* paired with smp_rmb() in rt6_get_cookie_safe() */
 	smp_wmb();
 	while (fn) {
-		fn->fn_sernum = sernum;
+		WRITE_ONCE(fn->fn_sernum, sernum);
 		fn = rcu_dereference_protected(fn->parent,
 				lockdep_is_held(&rt->fib6_table->tb6_lock));
 	}
@@ -1983,8 +1984,8 @@ static int fib6_clean_node(struct fib6_w
 	};
 
 	if (c->sernum != FIB6_NO_SERNUM_CHANGE &&
-	    w->node->fn_sernum != c->sernum)
-		w->node->fn_sernum = c->sernum;
+	    READ_ONCE(w->node->fn_sernum) != c->sernum)
+		WRITE_ONCE(w->node->fn_sernum, c->sernum);
 
 	if (!c->func) {
 		WARN_ON_ONCE(c->sernum == FIB6_NO_SERNUM_CHANGE);
@@ -2332,7 +2333,7 @@ static void ipv6_route_seq_setup_walk(st
 	iter->w.state = FWS_INIT;
 	iter->w.node = iter->w.root;
 	iter->w.args = iter;
-	iter->sernum = iter->w.root->fn_sernum;
+	iter->sernum = READ_ONCE(iter->w.root->fn_sernum);
 	INIT_LIST_HEAD(&iter->w.lh);
 	fib6_walker_link(net, &iter->w);
 }
@@ -2360,8 +2361,10 @@ static struct fib6_table *ipv6_route_seq
 
 static void ipv6_route_check_sernum(struct ipv6_route_iter *iter)
 {
-	if (iter->sernum != iter->w.root->fn_sernum) {
-		iter->sernum = iter->w.root->fn_sernum;
+	int sernum = READ_ONCE(iter->w.root->fn_sernum);
+
+	if (iter->sernum != sernum) {
+		iter->sernum = sernum;
 		iter->w.state = FWS_INIT;
 		iter->w.node = iter->w.root;
 		WARN_ON(iter->w.skip);
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -2320,7 +2320,7 @@ static void ip6_link_failure(struct sk_b
 			if (from) {
 				fn = rcu_dereference(from->fib6_node);
 				if (fn && (rt->rt6i_flags & RTF_DEFAULT))
-					fn->fn_sernum = -1;
+					WRITE_ONCE(fn->fn_sernum, -1);
 			}
 		}
 		rcu_read_unlock();

[PATCH 4.19 38/86] NFS: Ensure the server has an up to date ctime before hardlinking

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit 204975036b34f55237bc44c8a302a88468ef21b5 ]

Creating a hard link is required by POSIX to update the file ctime, so
ensure that the file data is synced to disk so that we don't clobber the
updated ctime by writing back after creating the hard link.

Fixes: 9f7682728728 ("NFS: Move the delegation return down into nfs4_proc_link()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/dir.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -2033,6 +2033,8 @@ nfs_link(struct dentry *old_dentry, stru
 
 	trace_nfs_link_enter(inode, dir, dentry);
 	d_drop(dentry);
+	if (S_ISREG(inode->i_mode))
+		nfs_sync_inode(inode);
 	error = NFS_PROTO(dir)->link(inode, dir, &dentry->d_name);
 	if (error == 0) {
 		ihold(inode);

[PATCH 4.19 39/86] NFS: Ensure the server has an up to date ctime before renaming

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit 6ff9d99bb88faebf134ca668842349d9718e5464 ]

Renaming a file is required by POSIX to update the file ctime, so
ensure that the file data is synced to disk so that we don't clobber the
updated ctime by writing back after creating the hard link.

Fixes: f2c2c552f119 ("NFS: Move delegation recall into the NFSv4 callback for rename_setup()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/dir.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -2123,6 +2123,8 @@ int nfs_rename(struct inode *old_dir, st
 		}
 	}
 
+	if (S_ISREG(old_inode->i_mode))
+		nfs_sync_inode(old_inode);
 	task = nfs_async_rename(old_dir, new_dir, old_dentry, new_dentry, NULL);
 	if (IS_ERR(task)) {
 		error = PTR_ERR(task);

[PATCH 4.19 40/86] phylib: fix potential use-after-free

[Greg Kroah-Hartman]

From: Marek Behún <kabel@kernel.org>

[ Upstream commit cbda1b16687580d5beee38273f6241ae3725960c ]

Commit bafbdd527d56 ("phylib: Add device reset GPIO support") added call
to phy_device_reset(phydev) after the put_device() call in phy_detach().

The comment before the put_device() call says that the phydev might go
away with put_device().

Fix potential use-after-free by calling phy_device_reset() before
put_device().

Fixes: bafbdd527d56 ("phylib: Add device reset GPIO support")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220119162748.32418-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phy_device.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index b884b681d5c52..a03d0627efb06 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1166,6 +1166,9 @@ void phy_detach(struct phy_device *phydev)
 	    phydev->mdio.dev.driver == &genphy_driver.mdiodrv.driver)
 		device_release_driver(&phydev->mdio.dev);
 
+	/* Assert the reset signal */
+	phy_device_reset(phydev, 1);
+
 	/*
 	 * The phydev might go away on the put_device() below, so avoid
 	 * a use-after-free bug by reading the underlying bus first.
@@ -1175,9 +1178,6 @@ void phy_detach(struct phy_device *phydev)
 	put_device(&phydev->mdio.dev);
 	if (ndev_owner != bus->owner)
 		module_put(bus->owner);
-
-	/* Assert the reset signal */
-	phy_device_reset(phydev, 1);
 }
 EXPORT_SYMBOL(phy_detach);
 
-- 
2.34.1

[PATCH 4.19 41/86] ibmvnic: init ->running_cap_crqs early

[Greg Kroah-Hartman]

From: Sukadev Bhattiprolu <sukadev@linux.ibm.com>

[ Upstream commit 151b6a5c06b678687f64f2d9a99fd04d5cd32b72 ]

We use ->running_cap_crqs to determine when the ibmvnic_tasklet() should
send out the next protocol message type. i.e when we get back responses
to all our QUERY_CAPABILITY CRQs we send out REQUEST_CAPABILITY crqs.
Similiary, when we get responses to all the REQUEST_CAPABILITY crqs, we
send out the QUERY_IP_OFFLOAD CRQ.

We currently increment ->running_cap_crqs as we send out each CRQ and
have the ibmvnic_tasklet() send out the next message type, when this
running_cap_crqs count drops to 0.

This assumes that all the CRQs of the current type were sent out before
the count drops to 0. However it is possible that we send out say 6 CRQs,
get preempted and receive all the 6 responses before we send out the
remaining CRQs. This can result in ->running_cap_crqs count dropping to
zero before all messages of the current type were sent and we end up
sending the next protocol message too early.

Instead initialize the ->running_cap_crqs upfront so the tasklet will
only send the next protocol message after all responses are received.

Use the cap_reqs local variable to also detect any discrepancy (either
now or in future) in the number of capability requests we actually send.

Currently only send_query_cap() is affected by this behavior (of sending
next message early) since it is called from the worker thread (during
reset) and from application thread (during ->ndo_open()) and they can be
preempted. send_request_cap() is only called from the tasklet  which
processes CRQ responses sequentially, is not be affected.  But to
maintain the existing symmtery with send_query_capability() we update
send_request_capability() also.

Fixes: 249168ad07cd ("ibmvnic: Make CRQ interrupt tasklet wait for all capabilities crqs")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ibm/ibmvnic.c | 106 +++++++++++++++++++----------
 1 file changed, 71 insertions(+), 35 deletions(-)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index c52c26fc44e59..9174eccfd9329 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -3044,11 +3044,25 @@ static void ibmvnic_send_req_caps(struct ibmvnic_adapter *adapter, int retry)
 	struct device *dev = &adapter->vdev->dev;
 	union ibmvnic_crq crq;
 	int max_entries;
+	int cap_reqs;
+
+	/* We send out 6 or 7 REQUEST_CAPABILITY CRQs below (depending on
+	 * the PROMISC flag). Initialize this count upfront. When the tasklet
+	 * receives a response to all of these, it will send the next protocol
+	 * message (QUERY_IP_OFFLOAD).
+	 */
+	if (!(adapter->netdev->flags & IFF_PROMISC) ||
+	    adapter->promisc_supported)
+		cap_reqs = 7;
+	else
+		cap_reqs = 6;
 
 	if (!retry) {
 		/* Sub-CRQ entries are 32 byte long */
 		int entries_page = 4 * PAGE_SIZE / (sizeof(u64) * 4);
 
+		atomic_set(&adapter->running_cap_crqs, cap_reqs);
+
 		if (adapter->min_tx_entries_per_subcrq > entries_page ||
 		    adapter->min_rx_add_entries_per_subcrq > entries_page) {
 			dev_err(dev, "Fatal, invalid entries per sub-crq\n");
@@ -3109,44 +3123,45 @@ static void ibmvnic_send_req_caps(struct ibmvnic_adapter *adapter, int retry)
 					adapter->opt_rx_comp_queues;
 
 		adapter->req_rx_add_queues = adapter->max_rx_add_queues;
+	} else {
+		atomic_add(cap_reqs, &adapter->running_cap_crqs);
 	}
-
 	memset(&crq, 0, sizeof(crq));
 	crq.request_capability.first = IBMVNIC_CRQ_CMD;
 	crq.request_capability.cmd = REQUEST_CAPABILITY;
 
 	crq.request_capability.capability = cpu_to_be16(REQ_TX_QUEUES);
 	crq.request_capability.number = cpu_to_be64(adapter->req_tx_queues);
-	atomic_inc(&adapter->running_cap_crqs);
+	cap_reqs--;
 	ibmvnic_send_crq(adapter, &crq);
 
 	crq.request_capability.capability = cpu_to_be16(REQ_RX_QUEUES);
 	crq.request_capability.number = cpu_to_be64(adapter->req_rx_queues);
-	atomic_inc(&adapter->running_cap_crqs);
+	cap_reqs--;
 	ibmvnic_send_crq(adapter, &crq);
 
 	crq.request_capability.capability = cpu_to_be16(REQ_RX_ADD_QUEUES);
 	crq.request_capability.number = cpu_to_be64(adapter->req_rx_add_queues);
-	atomic_inc(&adapter->running_cap_crqs);
+	cap_reqs--;
 	ibmvnic_send_crq(adapter, &crq);
 
 	crq.request_capability.capability =
 	    cpu_to_be16(REQ_TX_ENTRIES_PER_SUBCRQ);
 	crq.request_capability.number =
 	    cpu_to_be64(adapter->req_tx_entries_per_subcrq);
-	atomic_inc(&adapter->running_cap_crqs);
+	cap_reqs--;
 	ibmvnic_send_crq(adapter, &crq);
 
 	crq.request_capability.capability =
 	    cpu_to_be16(REQ_RX_ADD_ENTRIES_PER_SUBCRQ);
 	crq.request_capability.number =
 	    cpu_to_be64(adapter->req_rx_add_entries_per_subcrq);
-	atomic_inc(&adapter->running_cap_crqs);
+	cap_reqs--;
 	ibmvnic_send_crq(adapter, &crq);
 
 	crq.request_capability.capability = cpu_to_be16(REQ_MTU);
 	crq.request_capability.number = cpu_to_be64(adapter->req_mtu);
-	atomic_inc(&adapter->running_cap_crqs);
+	cap_reqs--;
 	ibmvnic_send_crq(adapter, &crq);
 
 	if (adapter->netdev->flags & IFF_PROMISC) {
@@ -3154,16 +3169,21 @@ static void ibmvnic_send_req_caps(struct ibmvnic_adapter *adapter, int retry)
 			crq.request_capability.capability =
 			    cpu_to_be16(PROMISC_REQUESTED);
 			crq.request_capability.number = cpu_to_be64(1);
-			atomic_inc(&adapter->running_cap_crqs);
+			cap_reqs--;
 			ibmvnic_send_crq(adapter, &crq);
 		}
 	} else {
 		crq.request_capability.capability =
 		    cpu_to_be16(PROMISC_REQUESTED);
 		crq.request_capability.number = cpu_to_be64(0);
-		atomic_inc(&adapter->running_cap_crqs);
+		cap_reqs--;
 		ibmvnic_send_crq(adapter, &crq);
 	}
+
+	/* Keep at end to catch any discrepancy between expected and actual
+	 * CRQs sent.
+	 */
+	WARN_ON(cap_reqs != 0);
 }
 
 static int pending_scrq(struct ibmvnic_adapter *adapter,
@@ -3568,118 +3588,132 @@ static void send_map_query(struct ibmvnic_adapter *adapter)
 static void send_cap_queries(struct ibmvnic_adapter *adapter)
 {
 	union ibmvnic_crq crq;
+	int cap_reqs;
+
+	/* We send out 25 QUERY_CAPABILITY CRQs below.  Initialize this count
+	 * upfront. When the tasklet receives a response to all of these, it
+	 * can send out the next protocol messaage (REQUEST_CAPABILITY).
+	 */
+	cap_reqs = 25;
+
+	atomic_set(&adapter->running_cap_crqs, cap_reqs);
 
-	atomic_set(&adapter->running_cap_crqs, 0);
 	memset(&crq, 0, sizeof(crq));
 	crq.query_capability.first = IBMVNIC_CRQ_CMD;
 	crq.query_capability.cmd = QUERY_CAPABILITY;
 
 	crq.query_capability.capability = cpu_to_be16(MIN_TX_QUEUES);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability = cpu_to_be16(MIN_RX_QUEUES);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability = cpu_to_be16(MIN_RX_ADD_QUEUES);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability = cpu_to_be16(MAX_TX_QUEUES);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability = cpu_to_be16(MAX_RX_QUEUES);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability = cpu_to_be16(MAX_RX_ADD_QUEUES);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability =
 	    cpu_to_be16(MIN_TX_ENTRIES_PER_SUBCRQ);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability =
 	    cpu_to_be16(MIN_RX_ADD_ENTRIES_PER_SUBCRQ);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability =
 	    cpu_to_be16(MAX_TX_ENTRIES_PER_SUBCRQ);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability =
 	    cpu_to_be16(MAX_RX_ADD_ENTRIES_PER_SUBCRQ);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability = cpu_to_be16(TCP_IP_OFFLOAD);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability = cpu_to_be16(PROMISC_SUPPORTED);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability = cpu_to_be16(MIN_MTU);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability = cpu_to_be16(MAX_MTU);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability = cpu_to_be16(MAX_MULTICAST_FILTERS);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability = cpu_to_be16(VLAN_HEADER_INSERTION);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability = cpu_to_be16(RX_VLAN_HEADER_INSERTION);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability = cpu_to_be16(MAX_TX_SG_ENTRIES);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability = cpu_to_be16(RX_SG_SUPPORTED);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability = cpu_to_be16(OPT_TX_COMP_SUB_QUEUES);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability = cpu_to_be16(OPT_RX_COMP_QUEUES);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability =
 			cpu_to_be16(OPT_RX_BUFADD_Q_PER_RX_COMP_Q);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability =
 			cpu_to_be16(OPT_TX_ENTRIES_PER_SUBCRQ);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability =
 			cpu_to_be16(OPT_RXBA_ENTRIES_PER_SUBCRQ);
-	atomic_inc(&adapter->running_cap_crqs);
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
 
 	crq.query_capability.capability = cpu_to_be16(TX_RX_DESC_REQ);
-	atomic_inc(&adapter->running_cap_crqs);
+
 	ibmvnic_send_crq(adapter, &crq);
+	cap_reqs--;
+
+	/* Keep at end to catch any discrepancy between expected and actual
+	 * CRQs sent.
+	 */
+	WARN_ON(cap_reqs != 0);
 }
 
 static void handle_vpd_size_rsp(union ibmvnic_crq *crq,
@@ -3923,6 +3957,8 @@ static void handle_request_cap_rsp(union ibmvnic_crq *crq,
 	char *name;
 
 	atomic_dec(&adapter->running_cap_crqs);
+	netdev_dbg(adapter->netdev, "Outstanding request-caps: %d\n",
+		   atomic_read(&adapter->running_cap_crqs));
 	switch (be16_to_cpu(crq->request_capability_rsp.capability)) {
 	case REQ_TX_QUEUES:
 		req_value = &adapter->req_tx_queues;
-- 
2.34.1

[PATCH 4.19 42/86] ibmvnic: dont spin in tasklet

[Greg Kroah-Hartman]

From: Sukadev Bhattiprolu <sukadev@linux.ibm.com>

[ Upstream commit 48079e7fdd0269d66b1d7d66ae88bd03162464ad ]

ibmvnic_tasklet() continuously spins waiting for responses to all
capability requests. It does this to avoid encountering an error
during initialization of the vnic. However if there is a bug in the
VIOS and we do not receive a response to one or more queries the
tasklet ends up spinning continuously leading to hard lock ups.

If we fail to receive a message from the VIOS it is reasonable to
timeout the login attempt rather than spin indefinitely in the tasklet.

Fixes: 249168ad07cd ("ibmvnic: Make CRQ interrupt tasklet wait for all capabilities crqs")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ibm/ibmvnic.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 9174eccfd9329..ffea634e03e8a 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -4493,12 +4493,6 @@ static void ibmvnic_tasklet(void *data)
 			ibmvnic_handle_crq(crq, adapter);
 			crq->generic.first = 0;
 		}
-
-		/* remain in tasklet until all
-		 * capabilities responses are received
-		 */
-		if (!adapter->wait_capability)
-			done = true;
 	}
 	/* if capabilities CRQ's were sent in this tasklet, the following
 	 * tasklet must wait until all responses are received
-- 
2.34.1

[PATCH 4.19 43/86] yam: fix a memory leak in yam_siocdevprivate()

[Greg Kroah-Hartman]

From: Hangyu Hua <hbh25y@gmail.com>

[ Upstream commit 29eb31542787e1019208a2e1047bb7c76c069536 ]

ym needs to be free when ym->cmd != SIOCYAMSMCS.

Fixes: 0781168e23a2 ("yam: fix a missing-check bug")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/hamradio/yam.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c
index fdab498725878..3db86f247bf45 100644
--- a/drivers/net/hamradio/yam.c
+++ b/drivers/net/hamradio/yam.c
@@ -966,9 +966,7 @@ static int yam_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 				 sizeof(struct yamdrv_ioctl_mcs));
 		if (IS_ERR(ym))
 			return PTR_ERR(ym);
-		if (ym->cmd != SIOCYAMSMCS)
-			return -EINVAL;
-		if (ym->bitrate > YAM_MAXBITRATE) {
+		if (ym->cmd != SIOCYAMSMCS || ym->bitrate > YAM_MAXBITRATE) {
 			kfree(ym);
 			return -EINVAL;
 		}
-- 
2.34.1

[PATCH 4.19 44/86] ipv4: raw: lock the socket in raw_bind()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 153a0d187e767c68733b8e9f46218eb1f41ab902 ]

For some reason, raw_bind() forgot to lock the socket.

BUG: KCSAN: data-race in __ip4_datagram_connect / raw_bind

write to 0xffff8881170d4308 of 4 bytes by task 5466 on cpu 0:
 raw_bind+0x1b0/0x250 net/ipv4/raw.c:739
 inet_bind+0x56/0xa0 net/ipv4/af_inet.c:443
 __sys_bind+0x14b/0x1b0 net/socket.c:1697
 __do_sys_bind net/socket.c:1708 [inline]
 __se_sys_bind net/socket.c:1706 [inline]
 __x64_sys_bind+0x3d/0x50 net/socket.c:1706
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff8881170d4308 of 4 bytes by task 5468 on cpu 1:
 __ip4_datagram_connect+0xb7/0x7b0 net/ipv4/datagram.c:39
 ip4_datagram_connect+0x2a/0x40 net/ipv4/datagram.c:89
 inet_dgram_connect+0x107/0x190 net/ipv4/af_inet.c:576
 __sys_connect_file net/socket.c:1900 [inline]
 __sys_connect+0x197/0x1b0 net/socket.c:1917
 __do_sys_connect net/socket.c:1927 [inline]
 __se_sys_connect net/socket.c:1924 [inline]
 __x64_sys_connect+0x3d/0x50 net/socket.c:1924
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x00000000 -> 0x0003007f

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 5468 Comm: syz-executor.5 Not tainted 5.17.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/raw.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index 21800979ed621..8cae691c3c9f4 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -725,6 +725,7 @@ static int raw_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 	int ret = -EINVAL;
 	int chk_addr_ret;
 
+	lock_sock(sk);
 	if (sk->sk_state != TCP_CLOSE || addr_len < sizeof(struct sockaddr_in))
 		goto out;
 
@@ -744,7 +745,9 @@ static int raw_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 		inet->inet_saddr = 0;  /* Use device */
 	sk_dst_reset(sk);
 	ret = 0;
-out:	return ret;
+out:
+	release_sock(sk);
+	return ret;
 }
 
 /*
-- 
2.34.1

[PATCH 4.19 45/86] ipv4: tcp: send zero IPID in SYNACK messages

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 970a5a3ea86da637471d3cd04d513a0755aba4bf ]

In commit 431280eebed9 ("ipv4: tcp: send zero IPID for RST and
ACK sent in SYN-RECV and TIME-WAIT state") we took care of some
ctl packets sent by TCP.

It turns out we need to use a similar strategy for SYNACK packets.

By default, they carry IP_DF and IPID==0, but there are ways
to ask them to use the hashed IP ident generator and thus
be used to build off-path attacks.
(Ref: Off-Path TCP Exploits of the Mixed IPID Assignment)

One of this way is to force (before listener is started)
echo 1 >/proc/sys/net/ipv4/ip_no_pmtu_disc

Another way is using forged ICMP ICMP_FRAG_NEEDED
with a very small MTU (like 68) to force a false return from
ip_dont_fragment()

In this patch, ip_build_and_send_pkt() uses the following
heuristics.

1) Most SYNACK packets are smaller than IPV4_MIN_MTU and therefore
can use IP_DF regardless of the listener or route pmtu setting.

2) In case the SYNACK packet is bigger than IPV4_MIN_MTU,
we use prandom_u32() generator instead of the IPv4 hashed ident one.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Ray Che <xijiache@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Cc: Geoff Alexander <alexandg@cs.unm.edu>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ip_output.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -160,12 +160,19 @@ int ip_build_and_send_pkt(struct sk_buff
 	iph->daddr    = (opt && opt->opt.srr ? opt->opt.faddr : daddr);
 	iph->saddr    = saddr;
 	iph->protocol = sk->sk_protocol;
-	if (ip_dont_fragment(sk, &rt->dst)) {
+	/* Do not bother generating IPID for small packets (eg SYNACK) */
+	if (skb->len <= IPV4_MIN_MTU || ip_dont_fragment(sk, &rt->dst)) {
 		iph->frag_off = htons(IP_DF);
 		iph->id = 0;
 	} else {
 		iph->frag_off = 0;
-		__ip_select_ident(net, iph, 1);
+		/* TCP packets here are SYNACK with fat IPv4/TCP options.
+		 * Avoid using the hashed IP ident generator.
+		 */
+		if (sk->sk_protocol == IPPROTO_TCP)
+			iph->id = (__force __be16)prandom_u32();
+		else
+			__ip_select_ident(net, iph, 1);
 	}
 
 	if (opt && opt->opt.optlen) {

[PATCH 4.19 46/86] netfilter: nat: remove l4 protocol port rovers

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

commit 6ed5943f8735e2b778d92ea4d9805c0a1d89bc2b upstream.

This is a leftover from days where single-cpu systems were common:
Store last port used to resolve a clash to use it as a starting point when
the next conflict needs to be resolved.

When we have parallel attempt to connect to same address:port pair,
its likely that both cores end up computing the same "available" port,
as both use same starting port, and newly used ports won't become
visible to other cores until the conntrack gets confirmed later.

One of the cores then has to drop the packet at insertion time because
the chosen new tuple turns out to be in use after all.

Lets simplify this: remove port rover and use a pseudo-random starting
point.

Note that this doesn't make netfilter default to 'fully random' mode;
the 'rover' was only used if NAT could not reuse source port as-is.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/netfilter/nf_nat_l4proto.h |    2 +-
 net/netfilter/nf_nat_proto_common.c    |    8 ++------
 net/netfilter/nf_nat_proto_dccp.c      |    5 +----
 net/netfilter/nf_nat_proto_sctp.c      |    5 +----
 net/netfilter/nf_nat_proto_tcp.c       |    5 +----
 net/netfilter/nf_nat_proto_udp.c       |   10 ++--------
 6 files changed, 8 insertions(+), 27 deletions(-)

--- a/include/net/netfilter/nf_nat_l4proto.h
+++ b/include/net/netfilter/nf_nat_l4proto.h
@@ -74,7 +74,7 @@ void nf_nat_l4proto_unique_tuple(const s
 				 struct nf_conntrack_tuple *tuple,
 				 const struct nf_nat_range2 *range,
 				 enum nf_nat_manip_type maniptype,
-				 const struct nf_conn *ct, u16 *rover);
+				 const struct nf_conn *ct);
 
 int nf_nat_l4proto_nlattr_to_range(struct nlattr *tb[],
 				   struct nf_nat_range2 *range);
--- a/net/netfilter/nf_nat_proto_common.c
+++ b/net/netfilter/nf_nat_proto_common.c
@@ -38,8 +38,7 @@ void nf_nat_l4proto_unique_tuple(const s
 				 struct nf_conntrack_tuple *tuple,
 				 const struct nf_nat_range2 *range,
 				 enum nf_nat_manip_type maniptype,
-				 const struct nf_conn *ct,
-				 u16 *rover)
+				 const struct nf_conn *ct)
 {
 	unsigned int range_size, min, max, i;
 	__be16 *portptr;
@@ -86,16 +85,13 @@ void nf_nat_l4proto_unique_tuple(const s
 	} else if (range->flags & NF_NAT_RANGE_PROTO_OFFSET) {
 		off = (ntohs(*portptr) - ntohs(range->base_proto.all));
 	} else {
-		off = *rover;
+		off = prandom_u32();
 	}
 
 	for (i = 0; ; ++off) {
 		*portptr = htons(min + off % range_size);
 		if (++i != range_size && nf_nat_used_tuple(tuple, ct))
 			continue;
-		if (!(range->flags & (NF_NAT_RANGE_PROTO_RANDOM_ALL|
-					NF_NAT_RANGE_PROTO_OFFSET)))
-			*rover = off;
 		return;
 	}
 }
--- a/net/netfilter/nf_nat_proto_dccp.c
+++ b/net/netfilter/nf_nat_proto_dccp.c
@@ -18,8 +18,6 @@
 #include <net/netfilter/nf_nat_l3proto.h>
 #include <net/netfilter/nf_nat_l4proto.h>
 
-static u_int16_t dccp_port_rover;
-
 static void
 dccp_unique_tuple(const struct nf_nat_l3proto *l3proto,
 		  struct nf_conntrack_tuple *tuple,
@@ -27,8 +25,7 @@ dccp_unique_tuple(const struct nf_nat_l3
 		  enum nf_nat_manip_type maniptype,
 		  const struct nf_conn *ct)
 {
-	nf_nat_l4proto_unique_tuple(l3proto, tuple, range, maniptype, ct,
-				    &dccp_port_rover);
+	nf_nat_l4proto_unique_tuple(l3proto, tuple, range, maniptype, ct);
 }
 
 static bool
--- a/net/netfilter/nf_nat_proto_sctp.c
+++ b/net/netfilter/nf_nat_proto_sctp.c
@@ -12,8 +12,6 @@
 
 #include <net/netfilter/nf_nat_l4proto.h>
 
-static u_int16_t nf_sctp_port_rover;
-
 static void
 sctp_unique_tuple(const struct nf_nat_l3proto *l3proto,
 		  struct nf_conntrack_tuple *tuple,
@@ -21,8 +19,7 @@ sctp_unique_tuple(const struct nf_nat_l3
 		  enum nf_nat_manip_type maniptype,
 		  const struct nf_conn *ct)
 {
-	nf_nat_l4proto_unique_tuple(l3proto, tuple, range, maniptype, ct,
-				    &nf_sctp_port_rover);
+	nf_nat_l4proto_unique_tuple(l3proto, tuple, range, maniptype, ct);
 }
 
 static bool
--- a/net/netfilter/nf_nat_proto_tcp.c
+++ b/net/netfilter/nf_nat_proto_tcp.c
@@ -18,8 +18,6 @@
 #include <net/netfilter/nf_nat_l4proto.h>
 #include <net/netfilter/nf_nat_core.h>
 
-static u16 tcp_port_rover;
-
 static void
 tcp_unique_tuple(const struct nf_nat_l3proto *l3proto,
 		 struct nf_conntrack_tuple *tuple,
@@ -27,8 +25,7 @@ tcp_unique_tuple(const struct nf_nat_l3p
 		 enum nf_nat_manip_type maniptype,
 		 const struct nf_conn *ct)
 {
-	nf_nat_l4proto_unique_tuple(l3proto, tuple, range, maniptype, ct,
-				    &tcp_port_rover);
+	nf_nat_l4proto_unique_tuple(l3proto, tuple, range, maniptype, ct);
 }
 
 static bool
--- a/net/netfilter/nf_nat_proto_udp.c
+++ b/net/netfilter/nf_nat_proto_udp.c
@@ -17,8 +17,6 @@
 #include <net/netfilter/nf_nat_l3proto.h>
 #include <net/netfilter/nf_nat_l4proto.h>
 
-static u16 udp_port_rover;
-
 static void
 udp_unique_tuple(const struct nf_nat_l3proto *l3proto,
 		 struct nf_conntrack_tuple *tuple,
@@ -26,8 +24,7 @@ udp_unique_tuple(const struct nf_nat_l3p
 		 enum nf_nat_manip_type maniptype,
 		 const struct nf_conn *ct)
 {
-	nf_nat_l4proto_unique_tuple(l3proto, tuple, range, maniptype, ct,
-				    &udp_port_rover);
+	nf_nat_l4proto_unique_tuple(l3proto, tuple, range, maniptype, ct);
 }
 
 static void
@@ -78,8 +75,6 @@ static bool udp_manip_pkt(struct sk_buff
 }
 
 #ifdef CONFIG_NF_NAT_PROTO_UDPLITE
-static u16 udplite_port_rover;
-
 static bool udplite_manip_pkt(struct sk_buff *skb,
 			      const struct nf_nat_l3proto *l3proto,
 			      unsigned int iphdroff, unsigned int hdroff,
@@ -103,8 +98,7 @@ udplite_unique_tuple(const struct nf_nat
 		     enum nf_nat_manip_type maniptype,
 		     const struct nf_conn *ct)
 {
-	nf_nat_l4proto_unique_tuple(l3proto, tuple, range, maniptype, ct,
-				    &udplite_port_rover);
+	nf_nat_l4proto_unique_tuple(l3proto, tuple, range, maniptype, ct);
 }
 
 const struct nf_nat_l4proto nf_nat_l4proto_udplite = {

[PATCH 4.19 47/86] netfilter: nat: limit port clash resolution attempts

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

commit a504b703bb1da526a01593da0e4be2af9d9f5fa8 upstream.

In case almost or all available ports are taken, clash resolution can
take a very long time, resulting in soft lockup.

This can happen when many to-be-natted hosts connect to same
destination:port (e.g. a proxy) and all connections pass the same SNAT.

Pick a random offset in the acceptable range, then try ever smaller
number of adjacent port numbers, until either the limit is reached or a
useable port was found.  This results in at most 248 attempts
(128 + 64 + 32 + 16 + 8, i.e. 4 restarts with new search offset)
instead of 64000+,

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nf_nat_proto_common.c |   29 +++++++++++++++++++++++------
 1 file changed, 23 insertions(+), 6 deletions(-)

--- a/net/netfilter/nf_nat_proto_common.c
+++ b/net/netfilter/nf_nat_proto_common.c
@@ -40,9 +40,10 @@ void nf_nat_l4proto_unique_tuple(const s
 				 enum nf_nat_manip_type maniptype,
 				 const struct nf_conn *ct)
 {
-	unsigned int range_size, min, max, i;
+	unsigned int range_size, min, max, i, attempts;
 	__be16 *portptr;
-	u_int16_t off;
+	u16 off;
+	static const unsigned int max_attempts = 128;
 
 	if (maniptype == NF_NAT_MANIP_SRC)
 		portptr = &tuple->src.u.all;
@@ -88,12 +89,28 @@ void nf_nat_l4proto_unique_tuple(const s
 		off = prandom_u32();
 	}
 
-	for (i = 0; ; ++off) {
+	attempts = range_size;
+	if (attempts > max_attempts)
+		attempts = max_attempts;
+
+	/* We are in softirq; doing a search of the entire range risks
+	 * soft lockup when all tuples are already used.
+	 *
+	 * If we can't find any free port from first offset, pick a new
+	 * one and try again, with ever smaller search window.
+	 */
+another_round:
+	for (i = 0; i < attempts; i++, off++) {
 		*portptr = htons(min + off % range_size);
-		if (++i != range_size && nf_nat_used_tuple(tuple, ct))
-			continue;
-		return;
+		if (!nf_nat_used_tuple(tuple, ct))
+			return;
 	}
+
+	if (attempts >= range_size || attempts < 16)
+		return;
+	attempts /= 2;
+	off = prandom_u32();
+	goto another_round;
 }
 EXPORT_SYMBOL_GPL(nf_nat_l4proto_unique_tuple);
 

[PATCH 4.19 48/86] tcp: fix possible socket leaks in internal pacing mode

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

This patch is addressing an issue in stable linux-4.19 only.

In linux-4.20, TCP stack adopted EDT (Earliest Departure
Time) model and this issue was incidentally fixed.

Issue at hand was an extra sock_hold() from tcp_internal_pacing()
in paths not using tcp_xmit_retransmit_queue()

Jason Xing reported this leak and provided a patch stopping
the extra sock_hold() to happen.

This patch is more complete and makes sure to avoid
unnecessary extra delays, by reprogramming the high
resolution timer.

Fixes: 73a6bab5aa2a ("tcp: switch pacing timer to softirq based hrtimer")
Reference: https://lore.kernel.org/all/CANn89i+7-wE4xr5D9DpH+N-xkL1SB8oVghCKgz+CT5eG1ODQhA@mail.gmail.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jason Xing <kerneljasonxing@gmail.com>
Reported-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Cc: liweishi <liweishi@kuaishou.com>
Cc: Shujin Li <lishujin@kuaishou.com>
Cc: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_output.c |   31 +++++++++++++++++++++++--------
 1 file changed, 23 insertions(+), 8 deletions(-)

--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -968,6 +968,8 @@ enum hrtimer_restart tcp_pace_kick(struc
 
 static void tcp_internal_pacing(struct sock *sk, const struct sk_buff *skb)
 {
+	struct tcp_sock *tp = tcp_sk(sk);
+	ktime_t expire, now;
 	u64 len_ns;
 	u32 rate;
 
@@ -979,12 +981,28 @@ static void tcp_internal_pacing(struct s
 
 	len_ns = (u64)skb->len * NSEC_PER_SEC;
 	do_div(len_ns, rate);
-	hrtimer_start(&tcp_sk(sk)->pacing_timer,
-		      ktime_add_ns(ktime_get(), len_ns),
+	now = ktime_get();
+	/* If hrtimer is already armed, then our caller has not
+	 * used tcp_pacing_check().
+	 */
+	if (unlikely(hrtimer_is_queued(&tp->pacing_timer))) {
+		expire = hrtimer_get_softexpires(&tp->pacing_timer);
+		if (ktime_after(expire, now))
+			now = expire;
+		if (hrtimer_try_to_cancel(&tp->pacing_timer) == 1)
+			__sock_put(sk);
+	}
+	hrtimer_start(&tp->pacing_timer, ktime_add_ns(now, len_ns),
 		      HRTIMER_MODE_ABS_PINNED_SOFT);
 	sock_hold(sk);
 }
 
+static bool tcp_pacing_check(const struct sock *sk)
+{
+	return tcp_needs_internal_pacing(sk) &&
+	       hrtimer_is_queued(&tcp_sk(sk)->pacing_timer);
+}
+
 static void tcp_update_skb_after_send(struct tcp_sock *tp, struct sk_buff *skb)
 {
 	skb->skb_mstamp = tp->tcp_mstamp;
@@ -2121,6 +2139,9 @@ static int tcp_mtu_probe(struct sock *sk
 	if (!tcp_can_coalesce_send_queue_head(sk, probe_size))
 		return -1;
 
+	if (tcp_pacing_check(sk))
+		return -1;
+
 	/* We're allowed to probe.  Build it now. */
 	nskb = sk_stream_alloc_skb(sk, probe_size, GFP_ATOMIC, false);
 	if (!nskb)
@@ -2194,12 +2215,6 @@ static int tcp_mtu_probe(struct sock *sk
 	return -1;
 }
 
-static bool tcp_pacing_check(const struct sock *sk)
-{
-	return tcp_needs_internal_pacing(sk) &&
-	       hrtimer_is_queued(&tcp_sk(sk)->pacing_timer);
-}
-
 /* TCP Small Queues :
  * Control number of packets in qdisc/devices to two packets / or ~1 ms.
  * (These limits are doubled for retransmits)

[PATCH 4.19 49/86] ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback

[Greg Kroah-Hartman]

From: Georgi Valkov <gvalkov@abv.bg>

commit 63e4b45c82ed1bde979da7052229a4229ce9cabf upstream.

When rx_buf is allocated we need to account for IPHETH_IP_ALIGN,
which reduces the usable size by 2 bytes. Otherwise we have 1512
bytes usable instead of 1514, and if we receive more than 1512
bytes, ipheth_rcvbulk_callback is called with status -EOVERFLOW,
after which the driver malfunctiones and all communication stops.

Resolves ipheth 2-1:4.2: ipheth_rcvbulk_callback: urb status: -75

Fixes: f33d9e2b48a3 ("usbnet: ipheth: fix connectivity with iOS 14")
Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/all/B60B8A4B-92A0-49B3-805D-809A2433B46C@abv.bg/
Link: https://lore.kernel.org/all/24851bd2769434a5fc24730dce8e8a984c5a4505.1643699778.git.jan.kiszka@siemens.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/ipheth.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -173,7 +173,7 @@ static int ipheth_alloc_urbs(struct iphe
 	if (tx_buf == NULL)
 		goto free_rx_urb;
 
-	rx_buf = usb_alloc_coherent(iphone->udev, IPHETH_BUF_SIZE,
+	rx_buf = usb_alloc_coherent(iphone->udev, IPHETH_BUF_SIZE + IPHETH_IP_ALIGN,
 				    GFP_KERNEL, &rx_urb->transfer_dma);
 	if (rx_buf == NULL)
 		goto free_tx_buf;
@@ -198,7 +198,7 @@ error_nomem:
 
 static void ipheth_free_urbs(struct ipheth_device *iphone)
 {
-	usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE, iphone->rx_buf,
+	usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE + IPHETH_IP_ALIGN, iphone->rx_buf,
 			  iphone->rx_urb->transfer_dma);
 	usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE, iphone->tx_buf,
 			  iphone->tx_urb->transfer_dma);
@@ -371,7 +371,7 @@ static int ipheth_rx_submit(struct iphet
 
 	usb_fill_bulk_urb(dev->rx_urb, udev,
 			  usb_rcvbulkpipe(udev, dev->bulk_in),
-			  dev->rx_buf, IPHETH_BUF_SIZE,
+			  dev->rx_buf, IPHETH_BUF_SIZE + IPHETH_IP_ALIGN,
 			  ipheth_rcvbulk_callback,
 			  dev);
 	dev->rx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;

[PATCH 4.19 50/86] net: amd-xgbe: ensure to reset the tx_timer_active flag

[Greg Kroah-Hartman]

From: Raju Rangoju <Raju.Rangoju@amd.com>

commit 7674b7b559b683478c3832527c59bceb169e701d upstream.

Ensure to reset the tx_timer_active flag in xgbe_stop(),
otherwise a port restart may result in tx timeout due to
uncleared flag.

Fixes: c635eaacbf77 ("amd-xgbe: Remove Tx coalescing")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20220127060222.453371-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/amd/xgbe/xgbe-drv.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
@@ -722,7 +722,9 @@ static void xgbe_stop_timers(struct xgbe
 		if (!channel->tx_ring)
 			break;
 
+		/* Deactivate the Tx timer */
 		del_timer_sync(&channel->tx_timer);
+		channel->tx_timer_active = 0;
 	}
 }
 

[PATCH 4.19 51/86] net: amd-xgbe: Fix skb data length underflow

[Greg Kroah-Hartman]

From: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>

commit 5aac9108a180fc06e28d4e7fb00247ce603b72ee upstream.

There will be BUG_ON() triggered in include/linux/skbuff.h leading to
intermittent kernel panic, when the skb length underflow is detected.

Fix this by dropping the packet if such length underflows are seen
because of inconsistencies in the hardware descriptors.

Fixes: 622c36f143fc ("amd-xgbe: Fix jumbo MTU processing on newer hardware")
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20220127092003.2812745-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/amd/xgbe/xgbe-drv.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
@@ -2768,6 +2768,14 @@ read_again:
 			buf2_len = xgbe_rx_buf2_len(rdata, packet, len);
 			len += buf2_len;
 
+			if (buf2_len > rdata->rx.buf.dma_len) {
+				/* Hardware inconsistency within the descriptors
+				 * that has resulted in a length underflow.
+				 */
+				error = 1;
+				goto skip_data;
+			}
+
 			if (!skb) {
 				skb = xgbe_create_skb(pdata, napi, rdata,
 						      buf1_len);
@@ -2797,8 +2805,10 @@ skip_data:
 		if (!last || context_next)
 			goto read_again;
 
-		if (!skb)
+		if (!skb || error) {
+			dev_kfree_skb(skb);
 			goto next_packet;
+		}
 
 		/* Be sure we don't exceed the configured MTU */
 		max_len = netdev->mtu + ETH_HLEN;

[PATCH 4.19 52/86] rtnetlink: make sure to refresh master_dev/m_ops in __rtnl_newlink()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit c6f6f2444bdbe0079e41914a35081530d0409963 upstream.

While looking at one unrelated syzbot bug, I found the replay logic
in __rtnl_newlink() to potentially trigger use-after-free.

It is better to clear master_dev and m_ops inside the loop,
in case we have to replay it.

Fixes: ba7d49b1f0f8 ("rtnetlink: provide api for getting and setting slave info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20220201012106.216495-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/rtnetlink.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -2942,9 +2942,9 @@ static int rtnl_newlink(struct sk_buff *
 {
 	struct net *net = sock_net(skb->sk);
 	const struct rtnl_link_ops *ops;
-	const struct rtnl_link_ops *m_ops = NULL;
+	const struct rtnl_link_ops *m_ops;
 	struct net_device *dev;
-	struct net_device *master_dev = NULL;
+	struct net_device *master_dev;
 	struct ifinfomsg *ifm;
 	char kind[MODULE_NAME_LEN];
 	char ifname[IFNAMSIZ];
@@ -2979,6 +2979,8 @@ replay:
 			dev = NULL;
 	}
 
+	master_dev = NULL;
+	m_ops = NULL;
 	if (dev) {
 		master_dev = netdev_master_upper_dev_get(dev);
 		if (master_dev)

[PATCH 4.19 53/86] af_packet: fix data-race in packet_setsockopt / packet_setsockopt

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit e42e70ad6ae2ae511a6143d2e8da929366e58bd9 upstream.

When packet_setsockopt( PACKET_FANOUT_DATA ) reads po->fanout,
no lock is held, meaning that another thread can change po->fanout.

Given that po->fanout can only be set once during the socket lifetime
(it is only cleared from fanout_release()), we can use
READ_ONCE()/WRITE_ONCE() to document the race.

BUG: KCSAN: data-race in packet_setsockopt / packet_setsockopt

write to 0xffff88813ae8e300 of 8 bytes by task 14653 on cpu 0:
 fanout_add net/packet/af_packet.c:1791 [inline]
 packet_setsockopt+0x22fe/0x24a0 net/packet/af_packet.c:3931
 __sys_setsockopt+0x209/0x2a0 net/socket.c:2180
 __do_sys_setsockopt net/socket.c:2191 [inline]
 __se_sys_setsockopt net/socket.c:2188 [inline]
 __x64_sys_setsockopt+0x62/0x70 net/socket.c:2188
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff88813ae8e300 of 8 bytes by task 14654 on cpu 1:
 packet_setsockopt+0x691/0x24a0 net/packet/af_packet.c:3935
 __sys_setsockopt+0x209/0x2a0 net/socket.c:2180
 __do_sys_setsockopt net/socket.c:2191 [inline]
 __se_sys_setsockopt net/socket.c:2188 [inline]
 __x64_sys_setsockopt+0x62/0x70 net/socket.c:2188
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x0000000000000000 -> 0xffff888106f8c000

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 14654 Comm: syz-executor.3 Not tainted 5.16.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 47dceb8ecdc1 ("packet: add classic BPF fanout mode")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220201022358.330621-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/packet/af_packet.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1730,7 +1730,10 @@ static int fanout_add(struct sock *sk, u
 		err = -ENOSPC;
 		if (refcount_read(&match->sk_ref) < PACKET_FANOUT_MAX) {
 			__dev_remove_pack(&po->prot_hook);
-			po->fanout = match;
+
+			/* Paired with packet_setsockopt(PACKET_FANOUT_DATA) */
+			WRITE_ONCE(po->fanout, match);
+
 			po->rollover = rollover;
 			rollover = NULL;
 			refcount_set(&match->sk_ref, refcount_read(&match->sk_ref) + 1);
@@ -3877,7 +3880,8 @@ packet_setsockopt(struct socket *sock, i
 	}
 	case PACKET_FANOUT_DATA:
 	{
-		if (!po->fanout)
+		/* Paired with the WRITE_ONCE() in fanout_add() */
+		if (!READ_ONCE(po->fanout))
 			return -EINVAL;
 
 		return fanout_set_data(po, optval, optlen);

[PATCH 4.19 54/86] audit: improve audit queue handling when "audit=1" on cmdline

[Greg Kroah-Hartman]

From: Paul Moore <paul@paul-moore.com>

commit f26d04331360d42dbd6b58448bd98e4edbfbe1c5 upstream.

When an admin enables audit at early boot via the "audit=1" kernel
command line the audit queue behavior is slightly different; the
audit subsystem goes to greater lengths to avoid dropping records,
which unfortunately can result in problems when the audit daemon is
forcibly stopped for an extended period of time.

This patch makes a number of changes designed to improve the audit
queuing behavior so that leaving the audit daemon in a stopped state
for an extended period does not cause a significant impact to the
system.

- kauditd_send_queue() is now limited to looping through the
  passed queue only once per call.  This not only prevents the
  function from looping indefinitely when records are returned
  to the current queue, it also allows any recovery handling in
  kauditd_thread() to take place when kauditd_send_queue()
  returns.

- Transient netlink send errors seen as -EAGAIN now cause the
  record to be returned to the retry queue instead of going to
  the hold queue.  The intention of the hold queue is to store,
  perhaps for an extended period of time, the events which led
  up to the audit daemon going offline.  The retry queue remains
  a temporary queue intended to protect against transient issues
  between the kernel and the audit daemon.

- The retry queue is now limited by the audit_backlog_limit
  setting, the same as the other queues.  This allows admins
  to bound the size of all of the audit queues on the system.

- kauditd_rehold_skb() now returns records to the end of the
  hold queue to ensure ordering is preserved in the face of
  recent changes to kauditd_send_queue().

Cc: stable@vger.kernel.org
Fixes: 5b52330bbfe63 ("audit: fix auditd/kernel connection state tracking")
Fixes: f4b3ee3c85551 ("audit: improve robustness of the audit queue handling")
Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/audit.c |   62 +++++++++++++++++++++++++++++++++++++++------------------
 1 file changed, 43 insertions(+), 19 deletions(-)

--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -549,20 +549,22 @@ static void kauditd_printk_skb(struct sk
 /**
  * kauditd_rehold_skb - Handle a audit record send failure in the hold queue
  * @skb: audit record
+ * @error: error code (unused)
  *
  * Description:
  * This should only be used by the kauditd_thread when it fails to flush the
  * hold queue.
  */
-static void kauditd_rehold_skb(struct sk_buff *skb)
+static void kauditd_rehold_skb(struct sk_buff *skb, __always_unused int error)
 {
-	/* put the record back in the queue at the same place */
-	skb_queue_head(&audit_hold_queue, skb);
+	/* put the record back in the queue */
+	skb_queue_tail(&audit_hold_queue, skb);
 }
 
 /**
  * kauditd_hold_skb - Queue an audit record, waiting for auditd
  * @skb: audit record
+ * @error: error code
  *
  * Description:
  * Queue the audit record, waiting for an instance of auditd.  When this
@@ -572,19 +574,31 @@ static void kauditd_rehold_skb(struct sk
  * and queue it, if we have room.  If we want to hold on to the record, but we
  * don't have room, record a record lost message.
  */
-static void kauditd_hold_skb(struct sk_buff *skb)
+static void kauditd_hold_skb(struct sk_buff *skb, int error)
 {
 	/* at this point it is uncertain if we will ever send this to auditd so
 	 * try to send the message via printk before we go any further */
 	kauditd_printk_skb(skb);
 
 	/* can we just silently drop the message? */
-	if (!audit_default) {
-		kfree_skb(skb);
-		return;
+	if (!audit_default)
+		goto drop;
+
+	/* the hold queue is only for when the daemon goes away completely,
+	 * not -EAGAIN failures; if we are in a -EAGAIN state requeue the
+	 * record on the retry queue unless it's full, in which case drop it
+	 */
+	if (error == -EAGAIN) {
+		if (!audit_backlog_limit ||
+		    skb_queue_len(&audit_retry_queue) < audit_backlog_limit) {
+			skb_queue_tail(&audit_retry_queue, skb);
+			return;
+		}
+		audit_log_lost("kauditd retry queue overflow");
+		goto drop;
 	}
 
-	/* if we have room, queue the message */
+	/* if we have room in the hold queue, queue the message */
 	if (!audit_backlog_limit ||
 	    skb_queue_len(&audit_hold_queue) < audit_backlog_limit) {
 		skb_queue_tail(&audit_hold_queue, skb);
@@ -593,24 +607,32 @@ static void kauditd_hold_skb(struct sk_b
 
 	/* we have no other options - drop the message */
 	audit_log_lost("kauditd hold queue overflow");
+drop:
 	kfree_skb(skb);
 }
 
 /**
  * kauditd_retry_skb - Queue an audit record, attempt to send again to auditd
  * @skb: audit record
+ * @error: error code (unused)
  *
  * Description:
  * Not as serious as kauditd_hold_skb() as we still have a connected auditd,
  * but for some reason we are having problems sending it audit records so
  * queue the given record and attempt to resend.
  */
-static void kauditd_retry_skb(struct sk_buff *skb)
+static void kauditd_retry_skb(struct sk_buff *skb, __always_unused int error)
 {
-	/* NOTE: because records should only live in the retry queue for a
-	 * short period of time, before either being sent or moved to the hold
-	 * queue, we don't currently enforce a limit on this queue */
-	skb_queue_tail(&audit_retry_queue, skb);
+	if (!audit_backlog_limit ||
+	    skb_queue_len(&audit_retry_queue) < audit_backlog_limit) {
+		skb_queue_tail(&audit_retry_queue, skb);
+		return;
+	}
+
+	/* we have to drop the record, send it via printk as a last effort */
+	kauditd_printk_skb(skb);
+	audit_log_lost("kauditd retry queue overflow");
+	kfree_skb(skb);
 }
 
 /**
@@ -648,7 +670,7 @@ static void auditd_reset(const struct au
 	/* flush the retry queue to the hold queue, but don't touch the main
 	 * queue since we need to process that normally for multicast */
 	while ((skb = skb_dequeue(&audit_retry_queue)))
-		kauditd_hold_skb(skb);
+		kauditd_hold_skb(skb, -ECONNREFUSED);
 }
 
 /**
@@ -722,16 +744,18 @@ static int kauditd_send_queue(struct soc
 			      struct sk_buff_head *queue,
 			      unsigned int retry_limit,
 			      void (*skb_hook)(struct sk_buff *skb),
-			      void (*err_hook)(struct sk_buff *skb))
+			      void (*err_hook)(struct sk_buff *skb, int error))
 {
 	int rc = 0;
-	struct sk_buff *skb;
+	struct sk_buff *skb = NULL;
+	struct sk_buff *skb_tail;
 	unsigned int failed = 0;
 
 	/* NOTE: kauditd_thread takes care of all our locking, we just use
 	 *       the netlink info passed to us (e.g. sk and portid) */
 
-	while ((skb = skb_dequeue(queue))) {
+	skb_tail = skb_peek_tail(queue);
+	while ((skb != skb_tail) && (skb = skb_dequeue(queue))) {
 		/* call the skb_hook for each skb we touch */
 		if (skb_hook)
 			(*skb_hook)(skb);
@@ -739,7 +763,7 @@ static int kauditd_send_queue(struct soc
 		/* can we send to anyone via unicast? */
 		if (!sk) {
 			if (err_hook)
-				(*err_hook)(skb);
+				(*err_hook)(skb, -ECONNREFUSED);
 			continue;
 		}
 
@@ -753,7 +777,7 @@ retry:
 			    rc == -ECONNREFUSED || rc == -EPERM) {
 				sk = NULL;
 				if (err_hook)
-					(*err_hook)(skb);
+					(*err_hook)(skb, rc);
 				if (rc == -EAGAIN)
 					rc = 0;
 				/* continue to drain the queue */

[PATCH 4.19 55/86] ASoC: ops: Reject out of bounds values in snd_soc_put_volsw()

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

commit 817f7c9335ec01e0f5e8caffc4f1dcd5e458a4c0 upstream.

We don't currently validate that the values being set are within the range
we advertised to userspace as being valid, do so and reject any values
that are out of range.

Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220124153253.3548853-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/soc-ops.c |   18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -322,13 +322,27 @@ int snd_soc_put_volsw(struct snd_kcontro
 	if (sign_bit)
 		mask = BIT(sign_bit + 1) - 1;
 
-	val = ((ucontrol->value.integer.value[0] + min) & mask);
+	val = ucontrol->value.integer.value[0];
+	if (mc->platform_max && val > mc->platform_max)
+		return -EINVAL;
+	if (val > max - min)
+		return -EINVAL;
+	if (val < 0)
+		return -EINVAL;
+	val = (val + min) & mask;
 	if (invert)
 		val = max - val;
 	val_mask = mask << shift;
 	val = val << shift;
 	if (snd_soc_volsw_is_stereo(mc)) {
-		val2 = ((ucontrol->value.integer.value[1] + min) & mask);
+		val2 = ucontrol->value.integer.value[1];
+		if (mc->platform_max && val2 > mc->platform_max)
+			return -EINVAL;
+		if (val2 > max - min)
+			return -EINVAL;
+		if (val2 < 0)
+			return -EINVAL;
+		val2 = (val2 + min) & mask;
 		if (invert)
 			val2 = max - val2;
 		if (reg == reg2) {

[PATCH 4.19 56/86] ASoC: ops: Reject out of bounds values in snd_soc_put_volsw_sx()

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

commit 4f1e50d6a9cf9c1b8c859d449b5031cacfa8404e upstream.

We don't currently validate that the values being set are within the range
we advertised to userspace as being valid, do so and reject any values
that are out of range.

Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220124153253.3548853-3-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/soc-ops.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -436,8 +436,15 @@ int snd_soc_put_volsw_sx(struct snd_kcon
 	int err = 0;
 	unsigned int val, val_mask, val2 = 0;
 
+	val = ucontrol->value.integer.value[0];
+	if (mc->platform_max && val > mc->platform_max)
+		return -EINVAL;
+	if (val > max - min)
+		return -EINVAL;
+	if (val < 0)
+		return -EINVAL;
 	val_mask = mask << shift;
-	val = (ucontrol->value.integer.value[0] + min) & mask;
+	val = (val + min) & mask;
 	val = val << shift;
 
 	err = snd_soc_component_update_bits(component, reg, val_mask, val);

[PATCH 4.19 57/86] ASoC: ops: Reject out of bounds values in snd_soc_put_xr_sx()

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

commit 4cf28e9ae6e2e11a044be1bcbcfa1b0d8675fe4d upstream.

We don't currently validate that the values being set are within the range
we advertised to userspace as being valid, do so and reject any values
that are out of range.

Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220124153253.3548853-4-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/soc-ops.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -910,6 +910,8 @@ int snd_soc_put_xr_sx(struct snd_kcontro
 	unsigned int i, regval, regmask;
 	int err;
 
+	if (val < mc->min || val > mc->max)
+		return -EINVAL;
 	if (invert)
 		val = max - val;
 	val &= mask;

[PATCH 4.19 58/86] ALSA: hda/realtek: Add missing fixup-model entry for Gigabyte X570 ALC1220 quirks

[Greg Kroah-Hartman]

From: Christian Lachner <gladiac@gmail.com>

commit 63394a16086fc2152869d7902621e2525e14bc40 upstream.

The initial commit of the new Gigabyte X570 ALC1220 quirks lacked the
fixup-model entry in alc882_fixup_models[]. It seemed not to cause any ill
effects but for completeness sake this commit makes up for that.

Signed-off-by: Christian Lachner <gladiac@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220129113243.93068-2-gladiac@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2607,6 +2607,7 @@ static const struct hda_model_fixup alc8
 	{.id = ALC882_FIXUP_NO_PRIMARY_HP, .name = "no-primary-hp"},
 	{.id = ALC887_FIXUP_ASUS_BASS, .name = "asus-bass"},
 	{.id = ALC1220_FIXUP_GB_DUAL_CODECS, .name = "dual-codecs"},
+	{.id = ALC1220_FIXUP_GB_X570, .name = "gb-x570"},
 	{.id = ALC1220_FIXUP_CLEVO_P950, .name = "clevo-p950"},
 	{}
 };

[PATCH 4.19 59/86] ALSA: hda/realtek: Fix silent output on Gigabyte X570S Aorus Master (newer chipset)

[Greg Kroah-Hartman]

From: Christian Lachner <gladiac@gmail.com>

commit 41a8601302ecbe704ac970552c33dc942300fc37 upstream.

Newer versions of the X570 Master come with a newer revision of the
mainboard chipset - the X570S. These boards have the same ALC1220 codec
but seem to initialize the codec with a different parameter in Coef 0x7
which causes the output audio to be very low. We therefore write a
known-good value to Coef 0x7 to fix that. As the value is the exact same
as on the other X570(non-S) boards the same quirk-function can be shared
between both generations.

This commit adds the Gigabyte X570S Aorus Master to the list of boards
using the ALC1220_FIXUP_GB_X570 quirk. This fixes both, the silent output
and the no-audio after reboot from windows problems.

This work has been tested by the folks over at the level1techs forum here:
https://forum.level1techs.com/t/has-anybody-gotten-audio-working-in-linux-on-aorus-x570-master/154072

Signed-off-by: Christian Lachner <gladiac@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220129113243.93068-3-gladiac@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2106,6 +2106,7 @@ static void alc1220_fixup_gb_x570(struct
 {
 	static const hda_nid_t conn1[] = { 0x0c };
 	static const struct coef_fw gb_x570_coefs[] = {
+		WRITE_COEF(0x07, 0x03c0),
 		WRITE_COEF(0x1a, 0x01c1),
 		WRITE_COEF(0x1b, 0x0202),
 		WRITE_COEF(0x43, 0x3005),
@@ -2533,6 +2534,7 @@ static const struct snd_pci_quirk alc882
 	SND_PCI_QUIRK(0x1458, 0xa0b8, "Gigabyte AZ370-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS),
 	SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_GB_X570),
 	SND_PCI_QUIRK(0x1458, 0xa0ce, "Gigabyte X570 Aorus Xtreme", ALC1220_FIXUP_CLEVO_P950),
+	SND_PCI_QUIRK(0x1458, 0xa0d5, "Gigabyte X570S Aorus Master", ALC1220_FIXUP_GB_X570),
 	SND_PCI_QUIRK(0x1462, 0x11f7, "MSI-GE63", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x1228, "MSI-GP63", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x1229, "MSI-GP73", ALC1220_FIXUP_CLEVO_P950),

[PATCH 4.19 60/86] ALSA: hda/realtek: Fix silent output on Gigabyte X570 Aorus Xtreme after reboot from Windows

[Greg Kroah-Hartman]

From: Christian Lachner <gladiac@gmail.com>

commit ea3541961376f733373839cc90493aafa8a7f733 upstream.

This commit switches the Gigabyte X570 Aorus Xtreme from using the
ALC1220_FIXUP_CLEVO_P950 to the ALC1220_FIXUP_GB_X570 quirk. This fixes
the no-audio after reboot from windows problem.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205275
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220129113243.93068-4-gladiac@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2533,7 +2533,7 @@ static const struct snd_pci_quirk alc882
 	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte EP45-DS3/Z87X-UD3H", ALC889_FIXUP_FRONT_HP_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1458, 0xa0b8, "Gigabyte AZ370-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS),
 	SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_GB_X570),
-	SND_PCI_QUIRK(0x1458, 0xa0ce, "Gigabyte X570 Aorus Xtreme", ALC1220_FIXUP_CLEVO_P950),
+	SND_PCI_QUIRK(0x1458, 0xa0ce, "Gigabyte X570 Aorus Xtreme", ALC1220_FIXUP_GB_X570),
 	SND_PCI_QUIRK(0x1458, 0xa0d5, "Gigabyte X570S Aorus Master", ALC1220_FIXUP_GB_X570),
 	SND_PCI_QUIRK(0x1462, 0x11f7, "MSI-GE63", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x1228, "MSI-GP63", ALC1220_FIXUP_CLEVO_P950),

[PATCH 4.19 61/86] drm/nouveau: fix off by one in BIOS boundary checking

[Greg Kroah-Hartman]

From: Nick Lopez <github@glowingmonkey.org>

commit 1b777d4d9e383d2744fc9b3a09af6ec1893c8b1a upstream.

Bounds checking when parsing init scripts embedded in the BIOS reject
access to the last byte. This causes driver initialization to fail on
Apple eMac's with GeForce 2 MX GPUs, leaving the system with no working
console.

This is probably only seen on OpenFirmware machines like PowerPC Macs
because the BIOS image provided by OF is only the used parts of the ROM,
not a power-of-two blocks read from PCI directly so PCs always have
empty bytes at the end that are never accessed.

Signed-off-by: Nick Lopez <github@glowingmonkey.org>
Fixes: 4d4e9907ff572 ("drm/nouveau/bios: guard against out-of-bounds accesses to image")
Cc: <stable@vger.kernel.org> # v4.10+
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220122081906.2633061-1-github@glowingmonkey.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/nouveau/nvkm/subdev/bios/base.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/base.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/base.c
@@ -38,7 +38,7 @@ nvbios_addr(struct nvkm_bios *bios, u32
 		*addr += bios->imaged_addr;
 	}
 
-	if (unlikely(*addr + size >= bios->size)) {
+	if (unlikely(*addr + size > bios->size)) {
 		nvkm_error(&bios->subdev, "OOB %d %08x %08x\n", size, p, *addr);
 		return false;
 	}

[PATCH 4.19 62/86] block: bio-integrity: Advance seed correctly for larger interval sizes

[Greg Kroah-Hartman]

From: Martin K. Petersen <martin.petersen@oracle.com>

commit b13e0c71856817fca67159b11abac350e41289f5 upstream.

Commit 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update
integrity seed") added code to update the integrity seed value when
advancing a bio. However, it failed to take into account that the
integrity interval might be larger than the 512-byte block layer
sector size. This broke bio splitting on PI devices with 4KB logical
blocks.

The seed value should be advanced by bio_integrity_intervals() and not
the number of sectors.

Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: stable@vger.kernel.org
Fixes: 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update integrity seed")
Tested-by: Dmitry Ivanov <dmitry.ivanov2@hpe.com>
Reported-by: Alexey Lyashkov <alexey.lyashkov@hpe.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220204034209.4193-1-martin.petersen@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 block/bio-integrity.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/block/bio-integrity.c
+++ b/block/bio-integrity.c
@@ -399,7 +399,7 @@ void bio_integrity_advance(struct bio *b
 	struct blk_integrity *bi = blk_get_integrity(bio->bi_disk);
 	unsigned bytes = bio_integrity_bytes(bi, bytes_done >> 9);
 
-	bip->bip_iter.bi_sector += bytes_done >> 9;
+	bip->bip_iter.bi_sector += bio_integrity_intervals(bi, bytes_done >> 9);
 	bvec_iter_advance(bip->bip_vec, &bip->bip_iter, bytes);
 }
 EXPORT_SYMBOL(bio_integrity_advance);

[PATCH 4.19 63/86] Revert "ASoC: mediatek: Check for error clk pointer"

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

This reverts commit e4f5f2767cd2c14fcb7b2c16dac5fe21888de9c2 which is
commit 9de2b9286a6dd16966959b3cb34fc2ddfd39213e upstream

With this patch in the tree, Chromebooks running the affected hardware
no longer boot. Bisect points to this patch, and reverting it fixes
the problem.

An analysis of the code with this patch applied shows:

        ret = init_clks(pdev, clk);
        if (ret)
                return ERR_PTR(ret);
...
                for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) {
                        struct clk *c = clk[data->clk_id[j]];

                        if (IS_ERR(c)) {
                                dev_err(&pdev->dev, "%s: clk unavailable\n",
                                        data->name);
                                return ERR_CAST(c);
                        }

                        scpd->clk[j] = c;
                }

Not all clocks in the clk_names array have to be present. Only the clocks
in the data->clk_id array are actually needed. The code already checks if
the required clocks are available and bails out if not. The assumption that
all clocks have to be present is wrong, and commit 9de2b9286a6d needs to be
reverted.

Fixes: 9de2b9286a6d ("ASoC: mediatek: Check for error clk pointer")
Cc: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Cc: Mark Brown <broonie@kernel.org>
Cc: James Liao <jamesjj.liao@mediatek.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com
Cc: Frank Wunderlich <frank-w@public-files.de>
Cc: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/lkml/20220205014755.699603-1-linux@roeck-us.net/
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/soc/mediatek/mtk-scpsys.c |   15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -341,17 +341,12 @@ out:
 	return ret;
 }
 
-static int init_clks(struct platform_device *pdev, struct clk **clk)
+static void init_clks(struct platform_device *pdev, struct clk **clk)
 {
 	int i;
 
-	for (i = CLK_NONE + 1; i < CLK_MAX; i++) {
+	for (i = CLK_NONE + 1; i < CLK_MAX; i++)
 		clk[i] = devm_clk_get(&pdev->dev, clk_names[i]);
-		if (IS_ERR(clk[i]))
-			return PTR_ERR(clk[i]);
-	}
-
-	return 0;
 }
 
 static struct scp *init_scp(struct platform_device *pdev,
@@ -361,7 +356,7 @@ static struct scp *init_scp(struct platf
 {
 	struct genpd_onecell_data *pd_data;
 	struct resource *res;
-	int i, j, ret;
+	int i, j;
 	struct scp *scp;
 	struct clk *clk[CLK_MAX];
 
@@ -416,9 +411,7 @@ static struct scp *init_scp(struct platf
 
 	pd_data->num_domains = num;
 
-	ret = init_clks(pdev, clk);
-	if (ret)
-		return ERR_PTR(ret);
+	init_clks(pdev, clk);
 
 	for (i = 0; i < num; i++) {
 		struct scp_domain *scpd = &scp->domains[i];

[PATCH 4.19 64/86] RDMA/mlx4: Dont continue event handler after memory allocation failure

[Greg Kroah-Hartman]

From: Leon Romanovsky <leonro@nvidia.com>

commit f3136c4ce7acf64bee43135971ca52a880572e32 upstream.

The failure to allocate memory during MLX4_DEV_EVENT_PORT_MGMT_CHANGE
event handler will cause skip the assignment logic, but
ib_dispatch_event() will be called anyway.

Fix it by calling to return instead of break after memory allocation
failure.

Fixes: 00f5ce99dc6e ("mlx4: Use port management change event instead of smp_snoop")
Link: https://lore.kernel.org/r/12a0e83f18cfad4b5f62654f141e240d04915e10.1643622264.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/hw/mlx4/main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -3351,7 +3351,7 @@ static void mlx4_ib_event(struct mlx4_de
 	case MLX4_DEV_EVENT_PORT_MGMT_CHANGE:
 		ew = kmalloc(sizeof *ew, GFP_ATOMIC);
 		if (!ew)
-			break;
+			return;
 
 		INIT_WORK(&ew->work, handle_port_mgmt_change_event);
 		memcpy(&ew->ib_eqe, eqe, sizeof *eqe);

[PATCH 4.19 65/86] iommu/vt-d: Fix potential memory leak in intel_setup_irq_remapping()

[Greg Kroah-Hartman]

From: Guoqing Jiang <guoqing.jiang@linux.dev>

commit 99e675d473eb8cf2deac1376a0f840222fc1adcf upstream.

After commit e3beca48a45b ("irqdomain/treewide: Keep firmware node
unconditionally allocated"). For tear down scenario, fn is only freed
after fail to allocate ir_domain, though it also should be freed in case
dmar_enable_qi returns error.

Besides free fn, irq_domain and ir_msi_domain need to be removed as well
if intel_setup_irq_remapping fails to enable queued invalidation.

Improve the rewinding path by add out_free_ir_domain and out_free_fwnode
lables per Baolu's suggestion.

Fixes: e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated")
Suggested-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220119063640.16864-1-guoqing.jiang@linux.dev
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220128031002.2219155-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iommu/intel_irq_remapping.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -543,9 +543,8 @@ static int intel_setup_irq_remapping(str
 					    fn, &intel_ir_domain_ops,
 					    iommu);
 	if (!iommu->ir_domain) {
-		irq_domain_free_fwnode(fn);
 		pr_err("IR%d: failed to allocate irqdomain\n", iommu->seq_id);
-		goto out_free_bitmap;
+		goto out_free_fwnode;
 	}
 	iommu->ir_msi_domain =
 		arch_create_remap_msi_irq_domain(iommu->ir_domain,
@@ -569,7 +568,7 @@ static int intel_setup_irq_remapping(str
 
 		if (dmar_enable_qi(iommu)) {
 			pr_err("Failed to enable queued invalidation\n");
-			goto out_free_bitmap;
+			goto out_free_ir_domain;
 		}
 	}
 
@@ -593,6 +592,14 @@ static int intel_setup_irq_remapping(str
 
 	return 0;
 
+out_free_ir_domain:
+	if (iommu->ir_msi_domain)
+		irq_domain_remove(iommu->ir_msi_domain);
+	iommu->ir_msi_domain = NULL;
+	irq_domain_remove(iommu->ir_domain);
+	iommu->ir_domain = NULL;
+out_free_fwnode:
+	irq_domain_free_fwnode(fn);
 out_free_bitmap:
 	kfree(bitmap);
 out_free_pages:

[PATCH 4.19 66/86] iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()

[Greg Kroah-Hartman]

From: Joerg Roedel <jroedel@suse.de>

commit 9b45a7738eec52bf0f5d8d3d54e822962781c5f2 upstream.

The polling loop for the register change in iommu_ga_log_enable() needs
to have a udelay() in it.  Otherwise the CPU might be faster than the
IOMMU hardware and wrongly trigger the WARN_ON() further down the code
stream. Use a 10us for udelay(), has there is some hardware where
activation of the GA log can take more than a 100ms.

A future optimization should move the activation check of the GA log
to the point where it gets used for the first time. But that is a
bigger change and not suitable for a fix.

Fixes: 8bda0cfbdc1a ("iommu/amd: Detect and initialize guest vAPIC log")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220204115537.3894-1-joro@8bytes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iommu/amd_iommu_init.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -30,6 +30,7 @@
 #include <linux/iommu.h>
 #include <linux/kmemleak.h>
 #include <linux/mem_encrypt.h>
+#include <linux/iopoll.h>
 #include <asm/pci-direct.h>
 #include <asm/iommu.h>
 #include <asm/gart.h>
@@ -772,6 +773,7 @@ static int iommu_ga_log_enable(struct am
 		status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET);
 		if (status & (MMIO_STATUS_GALOG_RUN_MASK))
 			break;
+		udelay(10);
 	}
 
 	if (i >= LOOP_TIMEOUT)

[PATCH 4.19 67/86] spi: bcm-qspi: check for valid cs before applying chip select

[Greg Kroah-Hartman]

From: Kamal Dasu <kdasu.kdev@gmail.com>

commit 2cbd27267ffe020af1442b95ec57f59a157ba85c upstream.

Apply only valid chip select value. This change fixes case where chip
select is set to initial value of '-1' during probe and  PM supend and
subsequent resume can try to use the value with undefined behaviour.
Also in case where gpio based chip select, the check in
bcm_qspi_chip_select() shall prevent undefined behaviour on resume.

Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220127185359.27322-1-kdasu.kdev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/spi/spi-bcm-qspi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -520,7 +520,7 @@ static void bcm_qspi_chip_select(struct
 	u32 rd = 0;
 	u32 wr = 0;
 
-	if (qspi->base[CHIP_SELECT]) {
+	if (cs >= 0 && qspi->base[CHIP_SELECT]) {
 		rd = bcm_qspi_read(qspi, CHIP_SELECT, 0);
 		wr = (rd & ~0xff) | (1 << cs);
 		if (rd == wr)

[PATCH 4.19 68/86] spi: mediatek: Avoid NULL pointer crash in interrupt

[Greg Kroah-Hartman]

From: Benjamin Gaignard <benjamin.gaignard@collabora.com>

commit f83a96e5f033fbbd21764705cb9c04234b96218e upstream.

In some case, like after a transfer timeout, master->cur_msg pointer
is NULL which led to a kernel crash when trying to use master->cur_msg->spi.
mtk_spi_can_dma(), pointed by master->can_dma, doesn't use this parameter
avoid the problem by setting NULL as second parameter.

Fixes: a568231f46322 ("spi: mediatek: Add spi bus for Mediatek MT8173")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Link: https://lore.kernel.org/r/20220131141708.888710-1-benjamin.gaignard@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/spi/spi-mt65xx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -498,7 +498,7 @@ static irqreturn_t mtk_spi_interrupt(int
 	else
 		mdata->state = MTK_SPI_IDLE;
 
-	if (!master->can_dma(master, master->cur_msg->spi, trans)) {
+	if (!master->can_dma(master, NULL, trans)) {
 		if (trans->rx_buf) {
 			cnt = mdata->xfer_len / 4;
 			ioread32_rep(mdata->base + SPI_RX_DATA_REG,

[PATCH 4.19 69/86] spi: meson-spicc: add IRQ check in meson_spicc_probe

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

commit e937440f7fc444a3e3f1fb75ea65292d6f433a44 upstream.

This check misses checking for  platform_get_irq()'s call and may passes
the negative error codes to devm_request_irq(), which takes unsigned IRQ #,
causing it to fail with -EINVAL, overriding an original error code.
Stop calling devm_request_irq() with invalid IRQ #s.

Fixes: 454fa271bc4e ("spi: Add Meson SPICC driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220126110447.24549-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/spi/spi-meson-spicc.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/spi/spi-meson-spicc.c
+++ b/drivers/spi/spi-meson-spicc.c
@@ -529,6 +529,11 @@ static int meson_spicc_probe(struct plat
 	writel_relaxed(0, spicc->base + SPICC_INTREG);
 
 	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto out_master;
+	}
+
 	ret = devm_request_irq(&pdev->dev, irq, meson_spicc_irq,
 			       0, NULL, spicc);
 	if (ret) {

[PATCH 4.19 70/86] net: ieee802154: hwsim: Ensure proper channel selection at probe time

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit 1293fccc9e892712d910ec96079d3717307f1d2d upstream.

Drivers are expected to set the PHY current_channel and current_page
according to their default state. The hwsim driver is advertising being
configured on channel 13 by default but that is not reflected in its own
internal pib structure. In order to ensure that this driver consider the
current channel as being 13 internally, we at least need to set the
pib->channel field to 13.

Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[stefan@datenfreihafen.org: fixed assigment from page to channel]
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ieee802154/mac802154_hwsim.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/ieee802154/mac802154_hwsim.c
+++ b/drivers/net/ieee802154/mac802154_hwsim.c
@@ -805,6 +805,7 @@ static int hwsim_add_one(struct genl_inf
 		goto err_pib;
 	}
 
+	pib->channel = 13;
 	rcu_assign_pointer(phy->pib, pib);
 	phy->idx = idx;
 	INIT_LIST_HEAD(&phy->edges);

[PATCH 4.19 71/86] net: ieee802154: mcr20a: Fix lifs/sifs periods

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit d753c4004820a888ec007dd88b271fa9c3172c5c upstream.

These periods are expressed in time units (microseconds) while 40 and 12
are the number of symbol durations these periods will last. We need to
multiply them both with phy->symbol_duration in order to get these
values in microseconds.

Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-3-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ieee802154/mcr20a.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ieee802154/mcr20a.c
+++ b/drivers/net/ieee802154/mcr20a.c
@@ -1005,8 +1005,8 @@ static void mcr20a_hw_setup(struct mcr20
 	dev_dbg(printdev(lp), "%s\n", __func__);
 
 	phy->symbol_duration = 16;
-	phy->lifs_period = 40;
-	phy->sifs_period = 12;
+	phy->lifs_period = 40 * phy->symbol_duration;
+	phy->sifs_period = 12 * phy->symbol_duration;
 
 	hw->flags = IEEE802154_HW_TX_OMIT_CKSUM |
 			IEEE802154_HW_AFILT |

[PATCH 4.19 72/86] net: ieee802154: ca8210: Stop leaking skbs

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit 621b24b09eb61c63f262da0c9c5f0e93348897e5 upstream.

Upon error the ieee802154_xmit_complete() helper is not called. Only
ieee802154_wake_queue() is called manually. We then leak the skb
structure.

Free the skb structure upon error before returning.

Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-5-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ieee802154/ca8210.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/ieee802154/ca8210.c
+++ b/drivers/net/ieee802154/ca8210.c
@@ -1769,6 +1769,7 @@ static int ca8210_async_xmit_complete(
 			status
 		);
 		if (status != MAC_TRANSACTION_OVERFLOW) {
+			dev_kfree_skb_any(priv->tx_skb);
 			ieee802154_wake_queue(priv->hw);
 			return 0;
 		}

[PATCH 4.19 73/86] net: ieee802154: Return meaningful error codes from the netlink helpers

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit 79c37ca73a6e9a33f7b2b7783ba6af07a448c8a9 upstream.

Returning -1 does not indicate anything useful.

Use a standard and meaningful error code instead.

Fixes: a26c5fd7622d ("nl802154: add support for security layer")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-6-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ieee802154/nl802154.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/net/ieee802154/nl802154.c
+++ b/net/ieee802154/nl802154.c
@@ -1459,7 +1459,7 @@ static int nl802154_send_key(struct sk_b
 
 	hdr = nl802154hdr_put(msg, portid, seq, flags, cmd);
 	if (!hdr)
-		return -1;
+		return -ENOBUFS;
 
 	if (nla_put_u32(msg, NL802154_ATTR_IFINDEX, dev->ifindex))
 		goto nla_put_failure;
@@ -1650,7 +1650,7 @@ static int nl802154_send_device(struct s
 
 	hdr = nl802154hdr_put(msg, portid, seq, flags, cmd);
 	if (!hdr)
-		return -1;
+		return -ENOBUFS;
 
 	if (nla_put_u32(msg, NL802154_ATTR_IFINDEX, dev->ifindex))
 		goto nla_put_failure;
@@ -1828,7 +1828,7 @@ static int nl802154_send_devkey(struct s
 
 	hdr = nl802154hdr_put(msg, portid, seq, flags, cmd);
 	if (!hdr)
-		return -1;
+		return -ENOBUFS;
 
 	if (nla_put_u32(msg, NL802154_ATTR_IFINDEX, dev->ifindex))
 		goto nla_put_failure;
@@ -2005,7 +2005,7 @@ static int nl802154_send_seclevel(struct
 
 	hdr = nl802154hdr_put(msg, portid, seq, flags, cmd);
 	if (!hdr)
-		return -1;
+		return -ENOBUFS;
 
 	if (nla_put_u32(msg, NL802154_ATTR_IFINDEX, dev->ifindex))
 		goto nla_put_failure;

[PATCH 4.19 74/86] net: macsec: Verify that send_sci is on when setting Tx sci explicitly

[Greg Kroah-Hartman]

From: Lior Nahmanson <liorna@nvidia.com>

commit d0cfa548dbde354de986911d3913897b5448faad upstream.

When setting Tx sci explicit, the Rx side is expected to use this
sci and not recalculate it from the packet.However, in case of Tx sci
is explicit and send_sci is off, the receiver is wrongly recalculate
the sci from the source MAC address which most likely be different
than the explicit sci.

Fix by preventing such configuration when macsec newlink is established
and return EINVAL error code on such cases.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/1643542672-29403-1-git-send-email-raeds@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/macsec.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -3259,6 +3259,15 @@ static int macsec_newlink(struct net *ne
 
 	macsec->real_dev = real_dev;
 
+	/* send_sci must be set to true when transmit sci explicitly is set */
+	if ((data && data[IFLA_MACSEC_SCI]) &&
+	    (data && data[IFLA_MACSEC_INC_SCI])) {
+		u8 send_sci = !!nla_get_u8(data[IFLA_MACSEC_INC_SCI]);
+
+		if (!send_sci)
+			return -EINVAL;
+	}
+
 	if (data && data[IFLA_MACSEC_ICV_LEN])
 		icv_len = nla_get_u8(data[IFLA_MACSEC_ICV_LEN]);
 	mtu = real_dev->mtu - icv_len - macsec_extra_len(true);

[PATCH 4.19 75/86] net: stmmac: ensure PTP time register reads are consistent

[Greg Kroah-Hartman]

From: Yannick Vignon <yannick.vignon@nxp.com>

commit 80d4609008e6d696a279e39ae7458c916fcd44c1 upstream.

Even if protected from preemption and interrupts, a small time window
remains when the 2 register reads could return inconsistent values,
each time the "seconds" register changes. This could lead to an about
1-second error in the reported time.

Add logic to ensure the "seconds" and "nanoseconds" values are consistent.

Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver")
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220203160025.750632-1-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c |   17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
@@ -159,15 +159,20 @@ static int adjust_systime(void __iomem *
 
 static void get_systime(void __iomem *ioaddr, u64 *systime)
 {
-	u64 ns;
+	u64 ns, sec0, sec1;
 
-	/* Get the TSSS value */
-	ns = readl(ioaddr + PTP_STNSR);
-	/* Get the TSS and convert sec time value to nanosecond */
-	ns += readl(ioaddr + PTP_STSR) * 1000000000ULL;
+	/* Get the TSS value */
+	sec1 = readl_relaxed(ioaddr + PTP_STSR);
+	do {
+		sec0 = sec1;
+		/* Get the TSSS value */
+		ns = readl_relaxed(ioaddr + PTP_STNSR);
+		/* Get the TSS value */
+		sec1 = readl_relaxed(ioaddr + PTP_STSR);
+	} while (sec0 != sec1);
 
 	if (systime)
-		*systime = ns;
+		*systime = ns + (sec1 * 1000000000ULL);
 }
 
 const struct stmmac_hwtimestamp stmmac_ptp = {

[PATCH 4.19 76/86] drm/i915/overlay: Prevent divide by zero bugs in scaling

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 90a3d22ff02b196d5884e111f39271a1d4ee8e3e upstream.

Smatch detected a divide by zero bug in check_overlay_scaling().

    drivers/gpu/drm/i915/display/intel_overlay.c:976 check_overlay_scaling()
    error: potential divide by zero bug '/ rec->dst_height'.
    drivers/gpu/drm/i915/display/intel_overlay.c:980 check_overlay_scaling()
    error: potential divide by zero bug '/ rec->dst_width'.

Prevent this by ensuring that the dst height and width are non-zero.

Fixes: 02e792fbaadb ("drm/i915: implement drmmode overlay support v4")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220124122409.GA31673@kili
(cherry picked from commit cf5b64f7f10b28bebb9b7c9d25e7aee5cbe43918)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/intel_overlay.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/gpu/drm/i915/intel_overlay.c
+++ b/drivers/gpu/drm/i915/intel_overlay.c
@@ -929,6 +929,9 @@ static int check_overlay_dst(struct inte
 	const struct intel_crtc_state *pipe_config =
 		overlay->crtc->config;
 
+	if (rec->dst_height == 0 || rec->dst_width == 0)
+		return -EINVAL;
+
 	if (rec->dst_x < pipe_config->pipe_src_w &&
 	    rec->dst_x + rec->dst_width <= pipe_config->pipe_src_w &&
 	    rec->dst_y < pipe_config->pipe_src_h &&

[PATCH 4.19 77/86] ASoC: fsl: Add missing error handling in pcm030_fabric_probe

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

commit fb25621da5702c104ce0a48de5b174ced09e5b4e upstream.

Add the missing platform_device_put() and platform_device_del()
before return from pcm030_fabric_probe in the error handling case.

Fixes: c912fa913446 ("ASoC: fsl: register the wm9712-codec")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220127131336.30214-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/fsl/pcm030-audio-fabric.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/sound/soc/fsl/pcm030-audio-fabric.c
+++ b/sound/soc/fsl/pcm030-audio-fabric.c
@@ -90,16 +90,21 @@ static int pcm030_fabric_probe(struct pl
 		dev_err(&op->dev, "platform_device_alloc() failed\n");
 
 	ret = platform_device_add(pdata->codec_device);
-	if (ret)
+	if (ret) {
 		dev_err(&op->dev, "platform_device_add() failed: %d\n", ret);
+		platform_device_put(pdata->codec_device);
+	}
 
 	ret = snd_soc_register_card(card);
-	if (ret)
+	if (ret) {
 		dev_err(&op->dev, "snd_soc_register_card() failed: %d\n", ret);
+		platform_device_del(pdata->codec_device);
+		platform_device_put(pdata->codec_device);
+	}
 
 	platform_set_drvdata(op, pdata);
-
 	return ret;
+
 }
 
 static int pcm030_fabric_remove(struct platform_device *op)

[PATCH 4.19 78/86] ASoC: cpcap: Check for NULL pointer after calling of_get_child_by_name

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

commit f7a6021aaf02088870559f82fc13c58cda7fea1a upstream.

If the device does not exist, of_get_child_by_name() will return NULL
pointer.
And devm_snd_soc_register_component() does not check it.
Also, I have noticed that cpcap_codec_driver has not been used yet.
Therefore, it should be better to check it in order to avoid the future
dereference of the NULL pointer.

Fixes: f6cdf2d3445d ("ASoC: cpcap: new codec")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220111025048.524134-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/codecs/cpcap.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/soc/codecs/cpcap.c
+++ b/sound/soc/codecs/cpcap.c
@@ -1541,6 +1541,8 @@ static int cpcap_codec_probe(struct plat
 {
 	struct device_node *codec_node =
 		of_get_child_by_name(pdev->dev.parent->of_node, "audio-codec");
+	if (!codec_node)
+		return -ENODEV;
 
 	pdev->dev.of_node = codec_node;
 

[PATCH 4.19 79/86] ASoC: max9759: fix underflow in speaker_gain_control_put()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 4c907bcd9dcd233da6707059d777ab389dcbd964 upstream.

Check for negative values of "priv->gain" to prevent an out of bounds
access.  The concern is that these might come from the user via:
  -> snd_ctl_elem_write_user()
    -> snd_ctl_elem_write()
      -> kctl->put()

Fixes: fa8d915172b8 ("ASoC: max9759: Add Amplifier Driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220119123101.GA9509@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/codecs/max9759.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/sound/soc/codecs/max9759.c
+++ b/sound/soc/codecs/max9759.c
@@ -64,7 +64,8 @@ static int speaker_gain_control_put(stru
 	struct snd_soc_component *c = snd_soc_kcontrol_component(kcontrol);
 	struct max9759 *priv = snd_soc_component_get_drvdata(c);
 
-	if (ucontrol->value.integer.value[0] > 3)
+	if (ucontrol->value.integer.value[0] < 0 ||
+	    ucontrol->value.integer.value[0] > 3)
 		return -EINVAL;
 
 	priv->gain = ucontrol->value.integer.value[0];

[PATCH 4.19 80/86] scsi: bnx2fc: Make bnx2fc_recv_frame() mp safe

[Greg Kroah-Hartman]

From: John Meneghini <jmeneghi@redhat.com>

commit 936bd03405fc83ba039d42bc93ffd4b88418f1d3 upstream.

Running tests with a debug kernel shows that bnx2fc_recv_frame() is
modifying the per_cpu lport stats counters in a non-mpsafe way.  Just boot
a debug kernel and run the bnx2fc driver with the hardware enabled.

[ 1391.699147] BUG: using smp_processor_id() in preemptible [00000000] code: bnx2fc_
[ 1391.699160] caller is bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc]
[ 1391.699174] CPU: 2 PID: 4355 Comm: bnx2fc_l2_threa Kdump: loaded Tainted: G    B
[ 1391.699180] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013
[ 1391.699183] Call Trace:
[ 1391.699188]  dump_stack_lvl+0x57/0x7d
[ 1391.699198]  check_preemption_disabled+0xc8/0xd0
[ 1391.699205]  bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc]
[ 1391.699215]  ? do_raw_spin_trylock+0xb5/0x180
[ 1391.699221]  ? bnx2fc_npiv_create_vports.isra.0+0x4e0/0x4e0 [bnx2fc]
[ 1391.699229]  ? bnx2fc_l2_rcv_thread+0xb7/0x3a0 [bnx2fc]
[ 1391.699240]  bnx2fc_l2_rcv_thread+0x1af/0x3a0 [bnx2fc]
[ 1391.699250]  ? bnx2fc_ulp_init+0xc0/0xc0 [bnx2fc]
[ 1391.699258]  kthread+0x364/0x420
[ 1391.699263]  ? _raw_spin_unlock_irq+0x24/0x50
[ 1391.699268]  ? set_kthread_struct+0x100/0x100
[ 1391.699273]  ret_from_fork+0x22/0x30

Restore the old get_cpu/put_cpu code with some modifications to reduce the
size of the critical section.

Link: https://lore.kernel.org/r/20220124145110.442335-1-jmeneghi@redhat.com
Fixes: d576a5e80cd0 ("bnx2fc: Improve stats update mechanism")
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/bnx2fc/bnx2fc_fcoe.c |   21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -515,7 +515,8 @@ static int bnx2fc_l2_rcv_thread(void *ar
 
 static void bnx2fc_recv_frame(struct sk_buff *skb)
 {
-	u32 fr_len;
+	u64 crc_err;
+	u32 fr_len, fr_crc;
 	struct fc_lport *lport;
 	struct fcoe_rcv_info *fr;
 	struct fc_stats *stats;
@@ -549,6 +550,11 @@ static void bnx2fc_recv_frame(struct sk_
 	skb_pull(skb, sizeof(struct fcoe_hdr));
 	fr_len = skb->len - sizeof(struct fcoe_crc_eof);
 
+	stats = per_cpu_ptr(lport->stats, get_cpu());
+	stats->RxFrames++;
+	stats->RxWords += fr_len / FCOE_WORD_TO_BYTE;
+	put_cpu();
+
 	fp = (struct fc_frame *)skb;
 	fc_frame_init(fp);
 	fr_dev(fp) = lport;
@@ -631,16 +637,15 @@ static void bnx2fc_recv_frame(struct sk_
 		return;
 	}
 
-	stats = per_cpu_ptr(lport->stats, smp_processor_id());
-	stats->RxFrames++;
-	stats->RxWords += fr_len / FCOE_WORD_TO_BYTE;
+	fr_crc = le32_to_cpu(fr_crc(fp));
 
-	if (le32_to_cpu(fr_crc(fp)) !=
-			~crc32(~0, skb->data, fr_len)) {
-		if (stats->InvalidCRCCount < 5)
+	if (unlikely(fr_crc != ~crc32(~0, skb->data, fr_len))) {
+		stats = per_cpu_ptr(lport->stats, get_cpu());
+		crc_err = (stats->InvalidCRCCount++);
+		put_cpu();
+		if (crc_err < 5)
 			printk(KERN_WARNING PFX "dropping frame with "
 			       "CRC error\n");
-		stats->InvalidCRCCount++;
 		kfree_skb(skb);
 		return;
 	}

[PATCH 4.19 81/86] nfsd: nfsd4_setclientid_confirm mistakenly expires confirmed client.

[Greg Kroah-Hartman]

From: Dai Ngo <dai.ngo@oracle.com>

commit ab451ea952fe9d7afefae55ddb28943a148247fe upstream.

>From RFC 7530 Section 16.34.5:

o  The server has not recorded an unconfirmed { v, x, c, *, * } and
   has recorded a confirmed { v, x, c, *, s }.  If the principals of
   the record and of SETCLIENTID_CONFIRM do not match, the server
   returns NFS4ERR_CLID_INUSE without removing any relevant leased
   client state, and without changing recorded callback and
   callback_ident values for client { x }.

The current code intends to do what the spec describes above but
it forgot to set 'old' to NULL resulting to the confirmed client
to be expired.

Fixes: 2b63482185e6 ("nfsd: fix clid_inuse on mount with security change")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfsd/nfs4state.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -3446,8 +3446,10 @@ nfsd4_setclientid_confirm(struct svc_rqs
 			status = nfserr_clid_inuse;
 			if (client_has_state(old)
 					&& !same_creds(&unconf->cl_cred,
-							&old->cl_cred))
+							&old->cl_cred)) {
+				old = NULL;
 				goto out;
+			}
 			status = mark_client_expired_locked(old);
 			if (status) {
 				old = NULL;

[PATCH 4.19 82/86] selftests: futex: Use variable MAKE instead of make

[Greg Kroah-Hartman]

From: Muhammad Usama Anjum <usama.anjum@collabora.com>

commit b9199181a9ef8252e47e207be8c23e1f50662620 upstream.

Recursive make commands should always use the variable MAKE, not the
explicit command name ‘make’. This has benefits and removes the
following warning when multiple jobs are used for the build:

make[2]: warning: jobserver unavailable: using -j1.  Add '+' to parent make rule.

Fixes: a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/futex/Makefile |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/tools/testing/selftests/futex/Makefile
+++ b/tools/testing/selftests/futex/Makefile
@@ -11,7 +11,7 @@ all:
 	@for DIR in $(SUBDIRS); do		\
 		BUILD_TARGET=$(OUTPUT)/$$DIR;	\
 		mkdir $$BUILD_TARGET  -p;	\
-		make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
+		$(MAKE) OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
 		if [ -e $$DIR/$(TEST_PROGS) ]; then \
 			rsync -a $$DIR/$(TEST_PROGS) $$BUILD_TARGET/; \
 		fi \
@@ -32,6 +32,6 @@ override define CLEAN
 	@for DIR in $(SUBDIRS); do		\
 		BUILD_TARGET=$(OUTPUT)/$$DIR;	\
 		mkdir $$BUILD_TARGET  -p;	\
-		make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
+		$(MAKE) OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
 	done
 endef

[PATCH 4.19 83/86] rtc: cmos: Evaluate century appropriate

[Greg Kroah-Hartman]

From: Riwen Lu <luriwen@kylinos.cn>

commit ff164ae39b82ee483b24579c8e22a13a8ce5bd04 upstream.

There's limiting the year to 2069. When setting the rtc year to 2070,
reading it returns 1970. Evaluate century starting from 19 to count the
correct year.

$ sudo date -s 20700106
Mon 06 Jan 2070 12:00:00 AM CST
$ sudo hwclock -w
$ sudo hwclock -r
1970-01-06 12:00:49.604968+08:00

Fixes: 2a4daadd4d3e5071 ("rtc: cmos: ignore bogus century byte")

Signed-off-by: Riwen Lu <luriwen@kylinos.cn>
Acked-by: Eric Wong <e@80x24.org>
Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220106084609.1223688-1-luriwen@kylinos.cn
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> # preparation for stable
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rtc/rtc-mc146818-lib.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/rtc/rtc-mc146818-lib.c
+++ b/drivers/rtc/rtc-mc146818-lib.c
@@ -82,7 +82,7 @@ unsigned int mc146818_get_time(struct rt
 	time->tm_year += real_year - 72;
 #endif
 
-	if (century > 20)
+	if (century > 19)
 		time->tm_year += (century - 19) * 100;
 
 	/*

[PATCH 4.19 84/86] EDAC/altera: Fix deferred probing

[Greg Kroah-Hartman]

From: Sergey Shtylyov <s.shtylyov@omp.ru>

commit 279eb8575fdaa92c314a54c0d583c65e26229107 upstream.

The driver overrides the error codes returned by platform_get_irq() to
-ENODEV for some strange reason, so if it returns -EPROBE_DEFER, the
driver will fail the probe permanently instead of the deferred probing.
Switch to propagating the proper error codes to platform driver code
upwards.

  [ bp: Massage commit message. ]

Fixes: 71bcada88b0f ("edac: altera: Add Altera SDRAM EDAC support")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220124185503.6720-2-s.shtylyov@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/edac/altera_edac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -366,7 +366,7 @@ static int altr_sdram_probe(struct platf
 	if (irq < 0) {
 		edac_printk(KERN_ERR, EDAC_MC,
 			    "No irq %d in DT\n", irq);
-		return -ENODEV;
+		return irq;
 	}
 
 	/* Arria10 has a 2nd IRQ */

[PATCH 4.19 85/86] EDAC/xgene: Fix deferred probing

[Greg Kroah-Hartman]

From: Sergey Shtylyov <s.shtylyov@omp.ru>

commit dfd0dfb9a7cc04acf93435b440dd34c2ca7b4424 upstream.

The driver overrides error codes returned by platform_get_irq_optional()
to -EINVAL for some strange reason, so if it returns -EPROBE_DEFER, the
driver will fail the probe permanently instead of the deferred probing.
Switch to propagating the proper error codes to platform driver code
upwards.

  [ bp: Massage commit message. ]

Fixes: 0d4429301c4a ("EDAC: Add APM X-Gene SoC EDAC driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220124185503.6720-3-s.shtylyov@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/edac/xgene_edac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/edac/xgene_edac.c
+++ b/drivers/edac/xgene_edac.c
@@ -1934,7 +1934,7 @@ static int xgene_edac_probe(struct platf
 			irq = platform_get_irq(pdev, i);
 			if (irq < 0) {
 				dev_err(&pdev->dev, "No IRQ resource\n");
-				rc = -EINVAL;
+				rc = irq;
 				goto out_err;
 			}
 			rc = devm_request_irq(&pdev->dev, irq,

[PATCH 4.19 86/86] ext4: fix error handling in ext4_restore_inline_data()

[Greg Kroah-Hartman]

From: Ritesh Harjani <riteshh@linux.ibm.com>

commit 897026aaa73eb2517dfea8d147f20ddb0b813044 upstream.

While running "./check -I 200 generic/475" it sometimes gives below
kernel BUG(). Ideally we should not call ext4_write_inline_data() if
ext4_create_inline_data() has failed.

<log snip>
[73131.453234] kernel BUG at fs/ext4/inline.c:223!

<code snip>
 212 static void ext4_write_inline_data(struct inode *inode, struct ext4_iloc *iloc,
 213                                    void *buffer, loff_t pos, unsigned int len)
 214 {
<...>
 223         BUG_ON(!EXT4_I(inode)->i_inline_off);
 224         BUG_ON(pos + len > EXT4_I(inode)->i_inline_size);

This patch handles the error and prints out a emergency msg saying potential
data loss for the given inode (since we couldn't restore the original
inline_data due to some previous error).

[ 9571.070313] EXT4-fs (dm-0): error restoring inline_data for inode -- potential data loss! (inode 1703982, error -30)

Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/9f4cd7dfd54fa58ff27270881823d94ddf78dd07.1642416995.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/inline.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -1125,7 +1125,15 @@ static void ext4_restore_inline_data(han
 				     struct ext4_iloc *iloc,
 				     void *buf, int inline_size)
 {
-	ext4_create_inline_data(handle, inode, inline_size);
+	int ret;
+
+	ret = ext4_create_inline_data(handle, inode, inline_size);
+	if (ret) {
+		ext4_msg(inode->i_sb, KERN_EMERG,
+			"error restoring inline_data for inode -- potential data loss! (inode %lu, error %d)",
+			inode->i_ino, ret);
+		return;
+	}
 	ext4_write_inline_data(inode, iloc, buf, 0, inline_size);
 	ext4_set_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA);
 }

Re: [PATCH 4.19 00/86] 4.19.228-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 785 bytes --]

Hi!

> This is the start of the stable review cycle for the 4.19.228 release.
> There are 86 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
> Anything received after that time might be too late.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.19 00/86] 4.19.228-rc1 review

[Shuah Khan]

On 2/7/22 4:05 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.228 release.
> There are 86 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.228-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 4.19 00/86] 4.19.228-rc1 review

[Guenter Roeck]

On Mon, Feb 07, 2022 at 12:05:23PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.228 release.
> There are 86 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 156 pass: 156 fail: 0
Qemu test results:
	total: 425 pass: 425 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 4.19 00/86] 4.19.228-rc1 review

[Jon Hunter]

On Mon, 07 Feb 2022 12:05:23 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.228 release.
> There are 86 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.228-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.19:
    10 builds:	10 pass, 0 fail
    22 boots:	22 pass, 0 fail
    40 tests:	40 pass, 0 fail

Linux version:	4.19.228-rc1-gb06b07466af8
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 4.19 00/86] 4.19.228-rc1 review

[Naresh Kamboju]

On Mon, 7 Feb 2022 at 16:45, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.228 release.
> There are 86 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.228-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h


Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 4.19.228-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.19.y
* git commit: b06b07466af8a89d8b0f135c98ada13f5f373d7a
* git describe: v4.19.227-87-gb06b07466af8
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.227-87-gb06b07466af8

## Test Regressions (compared to v4.19.227-54-gcc8f3cd8ea90)
No test regressions found.

## Metric Regressions (compared to v4.19.227-54-gcc8f3cd8ea90)
No metric regressions found.

## Test Fixes (compared to v4.19.227-54-gcc8f3cd8ea90)
No test fixes found.

## Metric Fixes (compared to v4.19.227-54-gcc8f3cd8ea90)
No metric fixes found.

## Test result summary
total: 85003, pass: 69288, fail: 738, skip: 13031, xfail: 1946

## Build Summary
* arm: 250 total, 246 passed, 4 failed
* arm64: 35 total, 35 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 19 total, 19 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 26 total, 26 passed, 0 failed
* powerpc: 52 total, 48 passed, 4 failed
* s390: 12 total, 12 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 34 total, 34 passed, 0 failed

## Test suites summary
* fwts
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.19 00/86] 4.19.228-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Mon, Feb 07, 2022 at 12:05:23PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.228 release.
> There are 86 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
> Anything received after that time might be too late.

Build test:
mips (gcc version 11.2.1 20220121): 63 configs -> no failure
arm (gcc version 11.2.1 20220121): 116 configs -> no new failure
arm64 (gcc version 11.2.1 20220121): 2 configs -> no failure
x86_64 (gcc version 11.2.1 20220121): 4 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]

[1]. https://openqa.qa.codethink.co.uk/tests/722


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip

Re: [PATCH 4.19 00/86] 4.19.228-rc1 review

[Samuel Zou]

On 2022/2/7 19:05, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.228 release.
> There are 86 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 09 Feb 2022 10:37:42 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.228-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on arm64 and x86 for 4.19.228-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.19.y
Version: 4.19.228-rc1
Commit: b06b07466af8a89d8b0f135c98ada13f5f373d7a
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8938
passed: 8938
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8938
passed: 8938
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>

Re: [PATCH 4.19 77/86] ASoC: fsl: Add missing error handling in pcm030_fabric_probe

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1310 bytes --]

Hi!

> commit fb25621da5702c104ce0a48de5b174ced09e5b4e upstream.
> 
> Add the missing platform_device_put() and platform_device_del()
> before return from pcm030_fabric_probe in the error handling case.

Are you sure?

> --- a/sound/soc/fsl/pcm030-audio-fabric.c
> +++ b/sound/soc/fsl/pcm030-audio-fabric.c
> @@ -90,16 +90,21 @@ static int pcm030_fabric_probe(struct pl
>  		dev_err(&op->dev, "platform_device_alloc() failed\n");
>  
>  	ret = platform_device_add(pdata->codec_device);
> -	if (ret)
> +	if (ret) {
>  		dev_err(&op->dev, "platform_device_add() failed: %d\n", ret);
> +		platform_device_put(pdata->codec_device);
> +	}
>  
>  	ret = snd_soc_register_card(card);
> -	if (ret)
> +	if (ret) {
>  		dev_err(&op->dev, "snd_soc_register_card() failed: %d\n", ret);
> +		platform_device_del(pdata->codec_device);
> +		platform_device_put(pdata->codec_device);
> +	}
>  
>  	platform_set_drvdata(op, pdata);
> -
>  	return ret;
> +
>  }

Besides interesting whitespace, this will happily do
platform_device_put() twice. I suspect it should return or
something. This does not look right.

Best regards,
							Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]