[PATCH 18/20] scsi: pm8001: fix NCQ NON DATA command completion handling

[Damien Le Moal <damien.lemoal@opensource.wdc.com>]

NCQ NON DATA is an NCQ command with the DMA_NONE DMA direction and so a
register-device-to-host-FIS response is expected for it.

However, for an IO_SUCCESS case, mpi_sata_completion() expects a
set-device-bits-FIS for any ata task with an use_ncq field true, which
includes NCQ NON DATA commands.

Fix this to correctly treat NCQ NON DATA commands as non-data by also
testing for the DMA_NONE DMA direction.

Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
---
 drivers/scsi/pm8001/pm8001_hwi.c | 3 ++-
 drivers/scsi/pm8001/pm80xx_hwi.c | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 9d982eb970fe..8095eb0b04f7 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -2418,7 +2418,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 				len = sizeof(struct pio_setup_fis);
 				pm8001_dbg(pm8001_ha, IO,
 					   "PIO read len = %d\n", len);
-			} else if (t->ata_task.use_ncq) {
+			} else if (t->ata_task.use_ncq &&
+				   t->data_dir != DMA_NONE) {
 				len = sizeof(struct set_dev_bits_fis);
 				pm8001_dbg(pm8001_ha, IO, "FPDMA len = %d\n",
 					   len);
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 44071a97d23b..4d88c0dbcefc 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -2510,7 +2510,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha,
 				len = sizeof(struct pio_setup_fis);
 				pm8001_dbg(pm8001_ha, IO,
 					   "PIO read len = %d\n", len);
-			} else if (t->ata_task.use_ncq) {
+			} else if (t->ata_task.use_ncq &&
+				   t->data_dir != DMA_NONE) {
 				len = sizeof(struct set_dev_bits_fis);
 				pm8001_dbg(pm8001_ha, IO, "FPDMA len = %d\n",
 					   len);
-- 
2.34.1