All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org, Bart Van Assche <bvanassche@acm.org>,
	Finn Thain <fthain@telegraphics.com.au>,
	Hannes Reinecke <hare@suse.com>,
	Ondrej Zary <linux@rainbow-software.org>,
	Michael Schmitz <schmitzmic@gmail.com>,
	Johannes Thumshirn <johannes.thumshirn@wdc.com>,
	Himanshu Madhani <himanshu.madhani@oracle.com>,
	Finn Thain <fthain@linux-m68k.org>,
	"James E.J. Bottomley" <jejb@linux.ibm.com>
Subject: [PATCH v3 09/48] scsi: NCR5380: Move the SCSI pointer to private command data
Date: Fri, 11 Feb 2022 14:32:08 -0800	[thread overview]
Message-ID: <20220211223247.14369-10-bvanassche@acm.org> (raw)
In-Reply-To: <20220211223247.14369-1-bvanassche@acm.org>

Move the SCSI pointer into the NCR5380 private command data instead of
using the SCSI pointer from struct scsi_cmnd. This patch prepares for
removal of the SCSI pointer from struct scsi_cmnd. The NCR5380 drivers
have been identified as follows:
$ git grep -l '#include.*NCR5380.h'
drivers/scsi/arm/cumana_1.c
drivers/scsi/arm/oak.c
drivers/scsi/atari_scsi.c
drivers/scsi/dmx3191d.c
drivers/scsi/g_NCR5380.c
drivers/scsi/mac_scsi.c
drivers/scsi/sun3_scsi.c

Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ondrej Zary <linux@rainbow-software.org>
Cc: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/NCR5380.c    | 89 ++++++++++++++++++++++++---------------
 drivers/scsi/NCR5380.h    |  1 +
 drivers/scsi/atari_scsi.c |  7 ++-
 drivers/scsi/g_NCR5380.c  |  6 ++-
 drivers/scsi/mac_scsi.c   |  7 ++-
 drivers/scsi/sun3_scsi.c  |  4 +-
 6 files changed, 72 insertions(+), 42 deletions(-)

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 6fa5e363945a..974b15cf8415 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -145,40 +145,47 @@ static void bus_reset_cleanup(struct Scsi_Host *);
 
 static inline void initialize_SCp(struct scsi_cmnd *cmd)
 {
+	struct scsi_pointer *scsi_pointer =
+		&NCR5380_cmd_priv(cmd)->scsi_pointer;
+
 	/*
 	 * Initialize the Scsi Pointer field so that all of the commands in the
 	 * various queues are valid.
 	 */
 
 	if (scsi_bufflen(cmd)) {
-		cmd->SCp.buffer = scsi_sglist(cmd);
-		cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
-		cmd->SCp.this_residual = cmd->SCp.buffer->length;
+		scsi_pointer->buffer = scsi_sglist(cmd);
+		scsi_pointer->ptr = sg_virt(scsi_pointer->buffer);
+		scsi_pointer->this_residual = scsi_pointer->buffer->length;
 	} else {
-		cmd->SCp.buffer = NULL;
-		cmd->SCp.ptr = NULL;
-		cmd->SCp.this_residual = 0;
+		scsi_pointer->buffer = NULL;
+		scsi_pointer->ptr = NULL;
+		scsi_pointer->this_residual = 0;
 	}
 
-	cmd->SCp.Status = 0;
-	cmd->SCp.Message = 0;
+	scsi_pointer->Status = 0;
+	scsi_pointer->Message = 0;
 }
 
 static inline void advance_sg_buffer(struct scsi_cmnd *cmd)
 {
-	struct scatterlist *s = cmd->SCp.buffer;
-
-	if (!cmd->SCp.this_residual && s && !sg_is_last(s)) {
-		cmd->SCp.buffer = sg_next(s);
-		cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
-		cmd->SCp.this_residual = cmd->SCp.buffer->length;
+	struct scsi_pointer *scsi_pointer =
+		&NCR5380_cmd_priv(cmd)->scsi_pointer;
+	struct scatterlist *s = scsi_pointer->buffer;
+
+	if (!scsi_pointer->this_residual && s && !sg_is_last(s)) {
+		scsi_pointer->buffer = sg_next(s);
+		scsi_pointer->ptr = sg_virt(scsi_pointer->buffer);
+		scsi_pointer->this_residual = scsi_pointer->buffer->length;
 	}
 }
 
 static inline void set_resid_from_SCp(struct scsi_cmnd *cmd)
 {
-	int resid = cmd->SCp.this_residual;
-	struct scatterlist *s = cmd->SCp.buffer;
+	struct scsi_pointer *scsi_pointer =
+		&NCR5380_cmd_priv(cmd)->scsi_pointer;
+	int resid = scsi_pointer->this_residual;
+	struct scatterlist *s = scsi_pointer->buffer;
 
 	if (s)
 		while (!sg_is_last(s)) {
@@ -757,6 +764,7 @@ static void NCR5380_main(struct work_struct *work)
 static void NCR5380_dma_complete(struct Scsi_Host *instance)
 {
 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
+	struct scsi_pointer *scsi_pointer;
 	int transferred;
 	unsigned char **data;
 	int *count;
@@ -764,7 +772,10 @@ static void NCR5380_dma_complete(struct Scsi_Host *instance)
 	unsigned char p;
 
 	if (hostdata->read_overruns) {
-		p = hostdata->connected->SCp.phase;
+		struct scsi_pointer *scsi_pointer =
+			&NCR5380_cmd_priv(hostdata->connected)->scsi_pointer;
+
+		p = scsi_pointer->phase;
 		if (p & SR_IO) {
 			udelay(10);
 			if ((NCR5380_read(BUS_AND_STATUS_REG) &
@@ -801,8 +812,9 @@ static void NCR5380_dma_complete(struct Scsi_Host *instance)
 	transferred = hostdata->dma_len - NCR5380_dma_residual(hostdata);
 	hostdata->dma_len = 0;
 
-	data = (unsigned char **)&hostdata->connected->SCp.ptr;
-	count = &hostdata->connected->SCp.this_residual;
+	scsi_pointer = &NCR5380_cmd_priv(hostdata->connected)->scsi_pointer;
+	data = (unsigned char **)&scsi_pointer->ptr;
+	count = &scsi_pointer->this_residual;
 	*data += transferred;
 	*count -= transferred;
 
@@ -1487,6 +1499,8 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
 				unsigned char **data)
 {
 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
+	struct scsi_pointer *scsi_pointer =
+		&NCR5380_cmd_priv(hostdata->connected)->scsi_pointer;
 	int c = *count;
 	unsigned char p = *phase;
 	unsigned char *d = *data;
@@ -1498,7 +1512,7 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
 		return -1;
 	}
 
-	hostdata->connected->SCp.phase = p;
+	scsi_pointer->phase = p;
 
 	if (p & SR_IO) {
 		if (hostdata->read_overruns)
@@ -1691,6 +1705,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 
 	while ((cmd = hostdata->connected)) {
 		struct NCR5380_cmd *ncmd = NCR5380_cmd_priv(cmd);
+		struct scsi_pointer *scsi_pointer = &ncmd->scsi_pointer;
 
 		tmp = NCR5380_read(STATUS_REG);
 		/* We only have a valid SCSI phase when REQ is asserted */
@@ -1712,10 +1727,10 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 				if (count > 0) {
 					if (cmd->sc_data_direction == DMA_TO_DEVICE)
 						sun3scsi_dma_send_setup(hostdata,
-						                        cmd->SCp.ptr, count);
+						                        scsi_pointer->ptr, count);
 					else
 						sun3scsi_dma_recv_setup(hostdata,
-						                        cmd->SCp.ptr, count);
+						                        scsi_pointer->ptr, count);
 					sun3_dma_setup_done = cmd;
 				}
 #ifdef SUN3_SCSI_VME
@@ -1758,8 +1773,8 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 				advance_sg_buffer(cmd);
 				dsprintk(NDEBUG_INFORMATION, instance,
 					"this residual %d, sg ents %d\n",
-					cmd->SCp.this_residual,
-					sg_nents(cmd->SCp.buffer));
+					scsi_pointer->this_residual,
+					sg_nents(scsi_pointer->buffer));
 
 				/*
 				 * The preferred transfer method is going to be
@@ -1778,7 +1793,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 				if (transfersize > 0) {
 					len = transfersize;
 					if (NCR5380_transfer_dma(instance, &phase,
-					    &len, (unsigned char **)&cmd->SCp.ptr)) {
+					    &len, (unsigned char **)&scsi_pointer->ptr)) {
 						/*
 						 * If the watchdog timer fires, all future
 						 * accesses to this device will use the
@@ -1794,13 +1809,13 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 					/* Transfer a small chunk so that the
 					 * irq mode lock is not held too long.
 					 */
-					transfersize = min(cmd->SCp.this_residual,
+					transfersize = min(scsi_pointer->this_residual,
 							   NCR5380_PIO_CHUNK_SIZE);
 					len = transfersize;
 					NCR5380_transfer_pio(instance, &phase, &len,
-					                     (unsigned char **)&cmd->SCp.ptr,
+					                     (unsigned char **)&scsi_pointer->ptr,
 							     0);
-					cmd->SCp.this_residual -= transfersize - len;
+					scsi_pointer->this_residual -= transfersize - len;
 				}
 #ifdef CONFIG_SUN3
 				if (sun3_dma_setup_done == cmd)
@@ -1811,7 +1826,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 				len = 1;
 				data = &tmp;
 				NCR5380_transfer_pio(instance, &phase, &len, &data, 0);
-				cmd->SCp.Message = tmp;
+				scsi_pointer->Message = tmp;
 
 				switch (tmp) {
 				case ABORT:
@@ -1828,15 +1843,15 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 					hostdata->connected = NULL;
 					hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
 
-					set_status_byte(cmd, cmd->SCp.Status);
+					set_status_byte(cmd, scsi_pointer->Status);
 
 					set_resid_from_SCp(cmd);
 
 					if (cmd->cmnd[0] == REQUEST_SENSE)
 						complete_cmd(instance, cmd);
 					else {
-						if (cmd->SCp.Status == SAM_STAT_CHECK_CONDITION ||
-						    cmd->SCp.Status == SAM_STAT_COMMAND_TERMINATED) {
+						if (scsi_pointer->Status == SAM_STAT_CHECK_CONDITION ||
+						    scsi_pointer->Status == SAM_STAT_COMMAND_TERMINATED) {
 							dsprintk(NDEBUG_QUEUES, instance, "autosense: adding cmd %p to tail of autosense queue\n",
 							         cmd);
 							list_add_tail(&ncmd->list,
@@ -2000,7 +2015,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 				len = 1;
 				data = &tmp;
 				NCR5380_transfer_pio(instance, &phase, &len, &data, 0);
-				cmd->SCp.Status = tmp;
+				scsi_pointer->Status = tmp;
 				break;
 			default:
 				shost_printk(KERN_ERR, instance, "unknown phase\n");
@@ -2151,6 +2166,8 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 
 #ifdef CONFIG_SUN3
 	if (sun3_dma_setup_done != tmp) {
+		struct scsi_pointer *scsi_pointer =
+			&NCR5380_cmd_priv(tmp)->scsi_pointer;
 		int count;
 
 		advance_sg_buffer(tmp);
@@ -2160,10 +2177,12 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 		if (count > 0) {
 			if (tmp->sc_data_direction == DMA_TO_DEVICE)
 				sun3scsi_dma_send_setup(hostdata,
-				                        tmp->SCp.ptr, count);
+				                        scsi_pointer->ptr,
+							count);
 			else
 				sun3scsi_dma_recv_setup(hostdata,
-				                        tmp->SCp.ptr, count);
+				                        scsi_pointer->ptr,
+							count);
 			sun3_dma_setup_done = tmp;
 		}
 	}
diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h
index 88a1bb41b72e..a4291e7c24dd 100644
--- a/drivers/scsi/NCR5380.h
+++ b/drivers/scsi/NCR5380.h
@@ -227,6 +227,7 @@ struct NCR5380_hostdata {
 };
 
 struct NCR5380_cmd {
+	struct scsi_pointer scsi_pointer;
 	struct list_head list;
 };
 
diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c
index e9d0d99abc86..17e6a6262abf 100644
--- a/drivers/scsi/atari_scsi.c
+++ b/drivers/scsi/atari_scsi.c
@@ -538,7 +538,9 @@ static int falcon_classify_cmd(struct scsi_cmnd *cmd)
 static int atari_scsi_dma_xfer_len(struct NCR5380_hostdata *hostdata,
                                    struct scsi_cmnd *cmd)
 {
-	int wanted_len = cmd->SCp.this_residual;
+	struct scsi_pointer *scsi_pointer =
+		&NCR5380_cmd_priv(cmd)->scsi_pointer;
+	int wanted_len = scsi_pointer->this_residual;
 	int possible_len, limit;
 
 	if (wanted_len < DMA_MIN_SIZE)
@@ -610,7 +612,8 @@ static int atari_scsi_dma_xfer_len(struct NCR5380_hostdata *hostdata,
 	}
 
 	/* Last step: apply the hard limit on DMA transfers */
-	limit = (atari_dma_buffer && !STRAM_ADDR(virt_to_phys(cmd->SCp.ptr))) ?
+	limit = (atari_dma_buffer &&
+		 !STRAM_ADDR(virt_to_phys(scsi_pointer->ptr))) ?
 		    STRAM_BUFFER_SIZE : 255*512;
 	if (possible_len > limit)
 		possible_len = limit;
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index 5923f86a384e..f887ed2e0a8e 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -663,7 +663,9 @@ static inline int generic_NCR5380_psend(struct NCR5380_hostdata *hostdata,
 static int generic_NCR5380_dma_xfer_len(struct NCR5380_hostdata *hostdata,
                                         struct scsi_cmnd *cmd)
 {
-	int transfersize = cmd->SCp.this_residual;
+	struct scsi_pointer *scsi_pointer =
+		&NCR5380_cmd_priv(cmd)->scsi_pointer;
+	int transfersize = scsi_pointer->this_residual;
 
 	if (hostdata->flags & FLAG_NO_PSEUDO_DMA)
 		return 0;
@@ -675,7 +677,7 @@ static int generic_NCR5380_dma_xfer_len(struct NCR5380_hostdata *hostdata,
 	/* Limit PDMA send to 512 B to avoid random corruption on DTC3181E */
 	if (hostdata->board == BOARD_DTC3181E &&
 	    cmd->sc_data_direction == DMA_TO_DEVICE)
-		transfersize = min(cmd->SCp.this_residual, 512);
+		transfersize = min(scsi_pointer->this_residual, 512);
 
 	return min(transfersize, DMA_MAX_SIZE);
 }
diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c
index 71d493a0bb43..d44ad35621fb 100644
--- a/drivers/scsi/mac_scsi.c
+++ b/drivers/scsi/mac_scsi.c
@@ -404,11 +404,14 @@ static inline int macscsi_pwrite(struct NCR5380_hostdata *hostdata,
 static int macscsi_dma_xfer_len(struct NCR5380_hostdata *hostdata,
                                 struct scsi_cmnd *cmd)
 {
+	struct scsi_pointer *scsi_pointer =
+		&NCR5380_cmd_priv(cmd)->scsi_pointer;
+
 	if (hostdata->flags & FLAG_NO_PSEUDO_DMA ||
-	    cmd->SCp.this_residual < setup_use_pdma)
+	    scsi_pointer->this_residual < setup_use_pdma)
 		return 0;
 
-	return cmd->SCp.this_residual;
+	return scsi_pointer->this_residual;
 }
 
 static int macscsi_dma_residual(struct NCR5380_hostdata *hostdata)
diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c
index 82a253270c3b..3a584a1b7944 100644
--- a/drivers/scsi/sun3_scsi.c
+++ b/drivers/scsi/sun3_scsi.c
@@ -334,7 +334,9 @@ static int sun3scsi_dma_residual(struct NCR5380_hostdata *hostdata)
 static int sun3scsi_dma_xfer_len(struct NCR5380_hostdata *hostdata,
                                  struct scsi_cmnd *cmd)
 {
-	int wanted_len = cmd->SCp.this_residual;
+	struct scsi_pointer *scsi_pointer =
+		&NCR5380_cmd_priv(cmd)->scsi_pointer;
+	int wanted_len = scsi_pointer->this_residual;
 
 	if (wanted_len < DMA_MIN_SIZE || blk_rq_is_passthrough(scsi_cmd_to_rq(cmd)))
 		return 0;

  parent reply	other threads:[~2022-02-11 22:33 UTC|newest]

Thread overview: 73+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-11 22:31 [PATCH v3 00/48] Remove the SCSI pointer from struct scsi_cmnd Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 01/48] scsi: ips: Remove an unreachable statement Bart Van Assche
2022-02-14  9:40   ` Hannes Reinecke
2022-02-14 19:59   ` Himanshu Madhani
2022-02-11 22:32 ` [PATCH v3 02/48] scsi: ips: Change the return type of ips_release() into 'void' Bart Van Assche
2022-02-14  9:43   ` Hannes Reinecke
2022-02-15  1:33     ` Bart Van Assche
2022-02-14 20:01   ` Himanshu Madhani
2022-02-11 22:32 ` [PATCH v3 03/48] scsi: ips: Use true and false instead of TRUE and FALSE Bart Van Assche
2022-02-14  9:43   ` Hannes Reinecke
2022-02-14 20:02   ` Himanshu Madhani
2022-02-11 22:32 ` [PATCH v3 04/48] scsi: nsp_cs: Change the return type of two functions into 'void' Bart Van Assche
2022-02-14  9:44   ` Hannes Reinecke
2022-02-14 20:04   ` Himanshu Madhani
2022-02-11 22:32 ` [PATCH v3 05/48] scsi: nsp_cs: Use true and false instead of TRUE and FALSE Bart Van Assche
2022-02-14  9:44   ` Hannes Reinecke
2022-02-14 20:05   ` Himanshu Madhani
2022-02-11 22:32 ` [PATCH v3 06/48] scsi: Remove drivers/scsi/scsi.h Bart Van Assche
2022-02-14  9:45   ` Hannes Reinecke
2022-02-11 22:32 ` [PATCH v3 07/48] scsi: NCR5380: Remove the NCR5380_CMD_SIZE macro Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 08/48] scsi: NCR5380: Introduce the NCR5380_cmd_priv() function Bart Van Assche
2022-02-14  9:46   ` Hannes Reinecke
2022-02-14 20:09   ` Himanshu Madhani
2022-02-11 22:32 ` Bart Van Assche [this message]
2022-02-14  9:47   ` [PATCH v3 09/48] scsi: NCR5380: Move the SCSI pointer to private command data Hannes Reinecke
2022-02-11 22:32 ` [PATCH v3 10/48] scsi: arm: Rename arm/scsi.h into arm/arm_scsi.h Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 11/48] scsi: arm: Move the SCSI pointer to private command data Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 12/48] scsi: 53c700: Stop clearing SCSI pointer fields Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 13/48] scsi: aacraid: Move the SCSI pointer to private command data Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 14/48] scsi: advansys: " Bart Van Assche
2022-02-14  9:54   ` Hannes Reinecke
2022-02-11 22:32 ` [PATCH v3 15/48] scsi: aha1542: Remove a set-but-not-used array Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 16/48] scsi: aha152x: Move the SCSI pointer to private command data Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 17/48] scsi: bfa: Stop using the SCSI pointer Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 18/48] scsi: csio: " Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 19/48] scsi: dc395x: " Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 20/48] scsi: esp_scsi: " Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 21/48] scsi: fdomain: Move the SCSI pointer to private command data Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 22/48] scsi: fnic: Fix a tracing statement Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 23/48] scsi: fnic: Stop using the SCSI pointer Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 24/48] scsi: hptiop: " Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 25/48] scsi: imm: Move the SCSI pointer to private command data Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 26/48] scsi: iscsi: Stop using the SCSI pointer Bart Van Assche
2022-02-13 22:12   ` Lee Duncan
2022-02-14  9:57   ` Hannes Reinecke
2022-02-14 20:12   ` Himanshu Madhani
2022-02-11 22:32 ` [PATCH v3 27/48] scsi: initio: " Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 28/48] scsi: libfc: " Bart Van Assche
2022-02-14 11:55   ` Hannes Reinecke
2022-02-15  3:00     ` Bart Van Assche
2022-02-15  7:02       ` Hannes Reinecke
2022-02-16 20:09         ` Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 29/48] scsi: mac53c94: Fix a set-but-not-used compiler warning Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 30/48] scsi: mac53c94: Move the SCSI pointer to private command data Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 31/48] scsi: megaraid: Stop using the SCSI pointer Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 32/48] scsi: megasas: " Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 33/48] scsi: mesh: Move the SCSI pointer to private command data Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 34/48] scsi: mvsas: Fix a set-but-not-used warning Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 35/48] scsi: mvumi: Stop using the SCSI pointer Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 36/48] scsi: nsp32: " Bart Van Assche
2022-02-14  4:02   ` Masanori Goto
2022-02-11 22:32 ` [PATCH v3 37/48] scsi: nsp_cs: Move the SCSI pointer to private command data Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 38/48] scsi: sym53c500_cs: " Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 39/48] scsi: ppa: " Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 40/48] scsi: qla1280: " Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 41/48] scsi: qla2xxx: Stop using the SCSI pointer Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 42/48] scsi: smartpqi: " Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 43/48] scsi: sym53c8xx_2: Move the SCSI pointer to private command data Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 44/48] scsi: usb: Stop using the SCSI pointer Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 45/48] scsi: wd719x: " Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 46/48] scsi: wd33c93: Move the SCSI pointer to private command data Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 47/48] scsi: zalon: Stop using the SCSI pointer Bart Van Assche
2022-02-11 22:32 ` [PATCH v3 48/48] scsi: core: Remove struct scsi_pointer from struct scsi_cmnd Bart Van Assche

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220211223247.14369-10-bvanassche@acm.org \
    --to=bvanassche@acm.org \
    --cc=fthain@linux-m68k.org \
    --cc=fthain@telegraphics.com.au \
    --cc=hare@suse.com \
    --cc=himanshu.madhani@oracle.com \
    --cc=jejb@linux.ibm.com \
    --cc=johannes.thumshirn@wdc.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=linux@rainbow-software.org \
    --cc=martin.petersen@oracle.com \
    --cc=schmitzmic@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.