From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org
Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
linux-kernel@vger.kernel.org,
Prabhakar <prabhakar.csengg@gmail.com>,
Biju Das <biju.das.jz@bp.renesas.com>
Subject: [PATCH 09/12] arm64: dts: renesas: r9a07g054: Add SSI{1,2,3} nodes and fillup the SSI0 stub node
Date: Sun, 27 Feb 2022 20:37:41 +0000 [thread overview]
Message-ID: <20220227203744.18355-10-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
In-Reply-To: <20220227203744.18355-1-prabhakar.mahadev-lad.rj@bp.renesas.com>
Add SSI{1,2,3} nodes and fillup the SSI0 stub node in RZ/V2L
(R9A07G054) SoC DTSI.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
---
arch/arm64/boot/dts/renesas/r9a07g054.dtsi | 80 +++++++++++++++++++++-
1 file changed, 79 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
index a3623e70f02c..e3a9f78b7fb8 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
@@ -96,9 +96,87 @@
ranges;
ssi0: ssi@10049c00 {
+ compatible = "renesas,r9a07g054-ssi",
+ "renesas,rz-ssi";
reg = <0 0x10049c00 0 0x400>;
+ interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 329 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+ clocks = <&cpg CPG_MOD R9A07G054_SSI0_PCLK2>,
+ <&cpg CPG_MOD R9A07G054_SSI0_PCLK_SFR>,
+ <&audio_clk1>, <&audio_clk2>;
+ clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+ resets = <&cpg R9A07G054_SSI0_RST_M2_REG>;
+ dmas = <&dmac 0x2655>, <&dmac 0x2656>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg>;
#sound-dai-cells = <0>;
- /* place holder */
+ status = "disabled";
+ };
+
+ ssi1: ssi@1004a000 {
+ compatible = "renesas,r9a07g054-ssi",
+ "renesas,rz-ssi";
+ reg = <0 0x1004a000 0 0x400>;
+ interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 333 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+ clocks = <&cpg CPG_MOD R9A07G054_SSI1_PCLK2>,
+ <&cpg CPG_MOD R9A07G054_SSI1_PCLK_SFR>,
+ <&audio_clk1>, <&audio_clk2>;
+ clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+ resets = <&cpg R9A07G054_SSI1_RST_M2_REG>;
+ dmas = <&dmac 0x2659>, <&dmac 0x265a>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ ssi2: ssi@1004a400 {
+ compatible = "renesas,r9a07g054-ssi",
+ "renesas,rz-ssi";
+ reg = <0 0x1004a400 0 0x400>;
+ interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 336 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+ clocks = <&cpg CPG_MOD R9A07G054_SSI2_PCLK2>,
+ <&cpg CPG_MOD R9A07G054_SSI2_PCLK_SFR>,
+ <&audio_clk1>, <&audio_clk2>;
+ clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+ resets = <&cpg R9A07G054_SSI2_RST_M2_REG>;
+ dmas = <&dmac 0x265f>;
+ dma-names = "rt";
+ power-domains = <&cpg>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ ssi3: ssi@1004a800 {
+ compatible = "renesas,r9a07g054-ssi",
+ "renesas,rz-ssi";
+ reg = <0 0x1004a800 0 0x400>;
+ interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 341 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+ clocks = <&cpg CPG_MOD R9A07G054_SSI3_PCLK2>,
+ <&cpg CPG_MOD R9A07G054_SSI3_PCLK_SFR>,
+ <&audio_clk1>, <&audio_clk2>;
+ clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+ resets = <&cpg R9A07G054_SSI3_RST_M2_REG>;
+ dmas = <&dmac 0x2661>, <&dmac 0x2662>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
};
spi1: spi@1004b000 {
--
2.17.1
next prev parent reply other threads:[~2022-02-27 20:38 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-27 20:37 [PATCH 00/12] Renesas RZ/V2L add support for SDHI/CANFD/I2C/OSTM/USB2/SBC/RSPI/WDT/SSI Lad Prabhakar
2022-02-27 20:37 ` [PATCH 01/12] arm64: dts: renesas: r9a07g054: Fillup the SDHI{0,1} stub nodes Lad Prabhakar
2022-03-01 9:32 ` Geert Uytterhoeven
2022-02-27 20:37 ` [PATCH 02/12] arm64: dts: renesas: r9a07g054l2-smarc: Drop deleting gpio-hog pins related to SDHI Lad Prabhakar
2022-03-01 9:32 ` Geert Uytterhoeven
2022-02-27 20:37 ` [PATCH 03/12] arm64: dts: renesas: r9a07g054: Fillup the CANFD stub node Lad Prabhakar
2022-03-01 9:32 ` Geert Uytterhoeven
2022-02-27 20:37 ` [PATCH 04/12] arm64: dts: renesas: r9a07g054l2-smarc: Drop deleting can{0,1}-stb-hog nodes Lad Prabhakar
2022-03-01 9:32 ` Geert Uytterhoeven
2022-02-27 20:37 ` [PATCH 05/12] arm64: dts: renesas: r9a07g054: Fillup the I2C{0,1,2,3} stub nodes Lad Prabhakar
2022-03-01 9:32 ` Geert Uytterhoeven
2022-02-27 20:37 ` [PATCH 06/12] arm64: dts: renesas: r9a07g054: Fillup the sbc stub node Lad Prabhakar
2022-03-01 9:32 ` Geert Uytterhoeven
2022-02-27 20:37 ` [PATCH 07/12] arm64: dts: renesas: r9a07g054: Fillup the OSTM{0,1,2} stub nodes Lad Prabhakar
2022-03-01 9:32 ` Geert Uytterhoeven
2022-02-27 20:37 ` [PATCH 08/12] arm64: dts: renesas: r9a07g054: Fillup the WDT{0,1,2} " Lad Prabhakar
2022-03-01 9:32 ` Geert Uytterhoeven
2022-02-27 20:37 ` Lad Prabhakar [this message]
2022-03-01 9:32 ` [PATCH 09/12] arm64: dts: renesas: r9a07g054: Add SSI{1,2,3} nodes and fillup the SSI0 stub node Geert Uytterhoeven
2022-02-27 20:37 ` [PATCH 10/12] arm64: dts: renesas: r9a07g054: Add USB2.0 phy and host support Lad Prabhakar
2022-03-01 9:32 ` Geert Uytterhoeven
2022-02-27 20:37 ` [PATCH 11/12] arm64: dts: renesas: r9a07g054: Add USB2.0 device support Lad Prabhakar
2022-03-01 9:32 ` Geert Uytterhoeven
2022-02-27 20:37 ` [PATCH 12/12] arm64: dts: renesas: r9a07g054: Add SPI{0,2} nodes and fillup SPI1 stub node Lad Prabhakar
2022-03-01 9:32 ` Geert Uytterhoeven
2022-02-28 14:51 ` [PATCH 00/12] Renesas RZ/V2L add support for SDHI/CANFD/I2C/OSTM/USB2/SBC/RSPI/WDT/SSI Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220227203744.18355-10-prabhakar.mahadev-lad.rj@bp.renesas.com \
--to=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=prabhakar.csengg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.