[PATCH 4.14 00/23] 4.14.272-rc1 review

[PATCH 4.14 00/23] 4.14.272-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.14.272 release.
There are 23 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 16 Mar 2022 11:27:22 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.272-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.14.272-rc1

Qu Wenruo <wqu@suse.com>
    btrfs: unlock newly allocated extent buffer after error

Josh Triplett <josh@joshtriplett.org>
    ext4: add check to prevent attempting to resize an fs with sparse_super2

Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
    ARM: fix Thumb2 regression with Spectre BHB

Michael S. Tsirkin <mst@redhat.com>
    virtio: acknowledge all features before access

Michael S. Tsirkin <mst@redhat.com>
    virtio: unexport virtio_finalize_features

James Morse <james.morse@arm.com>
    KVM: arm64: Reset PMC_EL0 to avoid a panic() on systems with no PMU

Dan Carpenter <dan.carpenter@oracle.com>
    staging: gdm724x: fix use after free in gdm_lte_rx()

Randy Dunlap <rdunlap@infradead.org>
    ARM: Spectre-BHB: provide empty stub for non-config

Mike Kravetz <mike.kravetz@oracle.com>
    selftests/memfd: clean up mapping in mfd_fail_write

Sven Schnelle <svens@linux.ibm.com>
    tracing: Ensure trace buffer is at least 4096 bytes large

Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
    Revert "xen-netback: Check for hotplug-status existence before watching"

Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
    Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"

suresh kumar <suresh2514@gmail.com>
    net-sysfs: add check for netdevice being present to speed_show

Eric Dumazet <edumazet@google.com>
    sctp: fix kernel-infoleak for SCTP sockets

Mark Featherston <mark@embeddedTS.com>
    gpio: ts4900: Do not set DAT and OE together

Pavel Skripkin <paskripkin@gmail.com>
    NFC: port100: fix use-after-free in port100_send_complete

Mohammad Kabat <mohammadkab@nvidia.com>
    net/mlx5: Fix size field in bufferx_reg struct

Duoming Zhou <duoming@zju.edu.cn>
    ax25: Fix NULL pointer dereference in ax25_kill_by_device

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    net: ethernet: lpc_eth: Handle error for clk_enable

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    net: ethernet: ti: cpts: Handle error for clk_enable

Miaoqian Lin <linmq006@gmail.com>
    ethernet: Fix error handling in xemaclite_of_probe

Tom Rix <trix@redhat.com>
    qed: return status of qed_iov_get_link

Jia-Ju Bai <baijiaju1990@gmail.com>
    net: qlogic: check the return value of dma_alloc_coherent() in qed_vf_hw_prepare()


-------------

Diffstat:

 Makefile                                      |  4 +--
 arch/arm/include/asm/spectre.h                |  6 ++++
 arch/arm/kernel/entry-armv.S                  |  4 +--
 arch/arm64/kvm/sys_regs.c                     |  4 ++-
 drivers/gpio/gpio-ts4900.c                    | 24 ++++++++++++----
 drivers/net/ethernet/nxp/lpc_eth.c            |  5 +++-
 drivers/net/ethernet/qlogic/qed/qed_sriov.c   | 18 +++++++-----
 drivers/net/ethernet/qlogic/qed/qed_vf.c      |  7 +++++
 drivers/net/ethernet/ti/cpts.c                |  4 ++-
 drivers/net/ethernet/xilinx/xilinx_emaclite.c |  4 ++-
 drivers/net/xen-netback/xenbus.c              | 13 ++++-----
 drivers/nfc/port100.c                         |  2 ++
 drivers/staging/gdm724x/gdm_lte.c             |  5 ++--
 drivers/virtio/virtio.c                       | 40 ++++++++++++++-------------
 fs/btrfs/extent-tree.c                        |  1 +
 fs/ext4/resize.c                              |  5 ++++
 include/linux/mlx5/mlx5_ifc.h                 |  4 +--
 include/linux/virtio.h                        |  1 -
 include/linux/virtio_config.h                 |  3 +-
 kernel/trace/trace.c                          | 10 ++++---
 net/ax25/af_ax25.c                            |  7 +++++
 net/core/net-sysfs.c                          |  2 +-
 net/sctp/sctp_diag.c                          |  9 ++----
 tools/testing/selftests/memfd/memfd_test.c    |  1 +
 24 files changed, 119 insertions(+), 64 deletions(-)

[PATCH 4.14 01/23] net: qlogic: check the return value of dma_alloc_coherent() in qed_vf_hw_prepare()

[Greg Kroah-Hartman]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit e0058f0fa80f6e09c4d363779c241c45a3c56b94 ]

The function dma_alloc_coherent() in qed_vf_hw_prepare() can fail, so
its return value should be checked.

Fixes: 1408cc1fa48c ("qed: Introduce VFs")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_vf.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_vf.c b/drivers/net/ethernet/qlogic/qed/qed_vf.c
index 693f2a039383..848a6574c0b2 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_vf.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_vf.c
@@ -539,6 +539,9 @@ int qed_vf_hw_prepare(struct qed_hwfn *p_hwfn)
 						    p_iov->bulletin.size,
 						    &p_iov->bulletin.phys,
 						    GFP_KERNEL);
+	if (!p_iov->bulletin.p_virt)
+		goto free_pf2vf_reply;
+
 	DP_VERBOSE(p_hwfn, QED_MSG_IOV,
 		   "VF's bulletin Board [%p virt 0x%llx phys 0x%08x bytes]\n",
 		   p_iov->bulletin.p_virt,
@@ -578,6 +581,10 @@ int qed_vf_hw_prepare(struct qed_hwfn *p_hwfn)
 
 	return rc;
 
+free_pf2vf_reply:
+	dma_free_coherent(&p_hwfn->cdev->pdev->dev,
+			  sizeof(union pfvf_tlvs),
+			  p_iov->pf2vf_reply, p_iov->pf2vf_reply_phys);
 free_vf2pf_request:
 	dma_free_coherent(&p_hwfn->cdev->pdev->dev,
 			  sizeof(union vfpf_tlvs),
-- 
2.34.1

[PATCH 4.14 02/23] qed: return status of qed_iov_get_link

[Greg Kroah-Hartman]

From: Tom Rix <trix@redhat.com>

[ Upstream commit d9dc0c84ad2d4cc911ba252c973d1bf18d5eb9cf ]

Clang static analysis reports this issue
qed_sriov.c:4727:19: warning: Assigned value is
  garbage or undefined
  ivi->max_tx_rate = tx_rate ? tx_rate : link.speed;
                   ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

link is only sometimes set by the call to qed_iov_get_link()
qed_iov_get_link fails without setting link or returning
status.  So change the decl to return status.

Fixes: 73390ac9d82b ("qed*: support ndo_get_vf_config")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_sriov.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
index bc9eec1bcbf1..5e7e977c62b6 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
@@ -3782,11 +3782,11 @@ bool qed_iov_mark_vf_flr(struct qed_hwfn *p_hwfn, u32 *p_disabled_vfs)
 	return found;
 }
 
-static void qed_iov_get_link(struct qed_hwfn *p_hwfn,
-			     u16 vfid,
-			     struct qed_mcp_link_params *p_params,
-			     struct qed_mcp_link_state *p_link,
-			     struct qed_mcp_link_capabilities *p_caps)
+static int qed_iov_get_link(struct qed_hwfn *p_hwfn,
+			    u16 vfid,
+			    struct qed_mcp_link_params *p_params,
+			    struct qed_mcp_link_state *p_link,
+			    struct qed_mcp_link_capabilities *p_caps)
 {
 	struct qed_vf_info *p_vf = qed_iov_get_vf_info(p_hwfn,
 						       vfid,
@@ -3794,7 +3794,7 @@ static void qed_iov_get_link(struct qed_hwfn *p_hwfn,
 	struct qed_bulletin_content *p_bulletin;
 
 	if (!p_vf)
-		return;
+		return -EINVAL;
 
 	p_bulletin = p_vf->bulletin.p_virt;
 
@@ -3804,6 +3804,7 @@ static void qed_iov_get_link(struct qed_hwfn *p_hwfn,
 		__qed_vf_get_link_state(p_hwfn, p_link, p_bulletin);
 	if (p_caps)
 		__qed_vf_get_link_caps(p_hwfn, p_caps, p_bulletin);
+	return 0;
 }
 
 static void qed_iov_process_mbx_req(struct qed_hwfn *p_hwfn,
@@ -4554,6 +4555,7 @@ static int qed_get_vf_config(struct qed_dev *cdev,
 	struct qed_public_vf_info *vf_info;
 	struct qed_mcp_link_state link;
 	u32 tx_rate;
+	int ret;
 
 	/* Sanitize request */
 	if (IS_VF(cdev))
@@ -4567,7 +4569,9 @@ static int qed_get_vf_config(struct qed_dev *cdev,
 
 	vf_info = qed_iov_get_public_vf_info(hwfn, vf_id, true);
 
-	qed_iov_get_link(hwfn, vf_id, NULL, &link, NULL);
+	ret = qed_iov_get_link(hwfn, vf_id, NULL, &link, NULL);
+	if (ret)
+		return ret;
 
 	/* Fill information about VF */
 	ivi->vf = vf_id;
-- 
2.34.1

[PATCH 4.14 03/23] ethernet: Fix error handling in xemaclite_of_probe

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit b19ab4b38b06aae12442b2de95ccf58b5dc53584 ]

This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. Calling of_node_put() to avoid the
refcount leak. As the remove function do.

Fixes: 5cdaaa12866e ("net: emaclite: adding MDIO and phy lib support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220308024751.2320-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/xilinx/xilinx_emaclite.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 5261796ce708..d83e6743f156 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -1161,7 +1161,7 @@ static int xemaclite_of_probe(struct platform_device *ofdev)
 	if (rc) {
 		dev_err(dev,
 			"Cannot register network device, aborting\n");
-		goto error;
+		goto put_node;
 	}
 
 	dev_info(dev,
@@ -1169,6 +1169,8 @@ static int xemaclite_of_probe(struct platform_device *ofdev)
 		 (unsigned int __force)ndev->mem_start, lp->base_addr, ndev->irq);
 	return 0;
 
+put_node:
+	of_node_put(lp->phy_node);
 error:
 	free_netdev(ndev);
 	return rc;
-- 
2.34.1

[PATCH 4.14 04/23] net: ethernet: ti: cpts: Handle error for clk_enable

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

[ Upstream commit 6babfc6e6fab068018c36e8f6605184b8c0b349d ]

As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.

Fixes: 8a2c9a5ab4b9 ("net: ethernet: ti: cpts: rework initialization/deinitialization")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ti/cpts.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/ti/cpts.c b/drivers/net/ethernet/ti/cpts.c
index 9e7e7e8a018d..232662cbc26a 100644
--- a/drivers/net/ethernet/ti/cpts.c
+++ b/drivers/net/ethernet/ti/cpts.c
@@ -440,7 +440,9 @@ int cpts_register(struct cpts *cpts)
 	for (i = 0; i < CPTS_MAX_EVENTS; i++)
 		list_add(&cpts->pool_data[i].list, &cpts->pool);
 
-	clk_enable(cpts->refclk);
+	err = clk_enable(cpts->refclk);
+	if (err)
+		return err;
 
 	cpts_write32(cpts, CPTS_EN, control);
 	cpts_write32(cpts, TS_PEND_EN, int_enable);
-- 
2.34.1

[PATCH 4.14 05/23] net: ethernet: lpc_eth: Handle error for clk_enable

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

[ Upstream commit 2169b79258c8be803d2595d6456b1e77129fe154 ]

As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.

Fixes: b7370112f519 ("lpc32xx: Added ethernet driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/nxp/lpc_eth.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c
index 415ac33341c5..27c22f0e9d25 100644
--- a/drivers/net/ethernet/nxp/lpc_eth.c
+++ b/drivers/net/ethernet/nxp/lpc_eth.c
@@ -1512,6 +1512,7 @@ static int lpc_eth_drv_resume(struct platform_device *pdev)
 {
 	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct netdata_local *pldat;
+	int ret;
 
 	if (device_may_wakeup(&pdev->dev))
 		disable_irq_wake(ndev->irq);
@@ -1521,7 +1522,9 @@ static int lpc_eth_drv_resume(struct platform_device *pdev)
 			pldat = netdev_priv(ndev);
 
 			/* Enable interface clock */
-			clk_enable(pldat->clk);
+			ret = clk_enable(pldat->clk);
+			if (ret)
+				return ret;
 
 			/* Reset and initialize */
 			__lpc_eth_reset(pldat);
-- 
2.34.1

[PATCH 4.14 06/23] ax25: Fix NULL pointer dereference in ax25_kill_by_device

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit 71171ac8eb34ce7fe6b3267dce27c313ab3cb3ac ]

When two ax25 devices attempted to establish connection, the requester use ax25_create(),
ax25_bind() and ax25_connect() to initiate connection. The receiver use ax25_rcv() to
accept connection and use ax25_create_cb() in ax25_rcv() to create ax25_cb, but the
ax25_cb->sk is NULL. When the receiver is detaching, a NULL pointer dereference bug
caused by sock_hold(sk) in ax25_kill_by_device() will happen. The corresponding
fail log is shown below:

===============================================================
BUG: KASAN: null-ptr-deref in ax25_device_event+0xfd/0x290
Call Trace:
...
ax25_device_event+0xfd/0x290
raw_notifier_call_chain+0x5e/0x70
dev_close_many+0x174/0x220
unregister_netdevice_many+0x1f7/0xa60
unregister_netdevice_queue+0x12f/0x170
unregister_netdev+0x13/0x20
mkiss_close+0xcd/0x140
tty_ldisc_release+0xc0/0x220
tty_release_struct+0x17/0xa0
tty_release+0x62d/0x670
...

This patch add condition check in ax25_kill_by_device(). If s->sk is
NULL, it will goto if branch to kill device.

Fixes: 4e0f718daf97 ("ax25: improve the incomplete fix to avoid UAF and NPD bugs")
Reported-by: Thomas Osterried <thomas@osterried.de>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ax25/af_ax25.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index 36d2e1dfa1e6..466f9e3883c8 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -90,6 +90,13 @@ static void ax25_kill_by_device(struct net_device *dev)
 	ax25_for_each(s, &ax25_list) {
 		if (s->ax25_dev == ax25_dev) {
 			sk = s->sk;
+			if (!sk) {
+				spin_unlock_bh(&ax25_list_lock);
+				s->ax25_dev = NULL;
+				ax25_disconnect(s, ENETUNREACH);
+				spin_lock_bh(&ax25_list_lock);
+				goto again;
+			}
 			sock_hold(sk);
 			spin_unlock_bh(&ax25_list_lock);
 			lock_sock(sk);
-- 
2.34.1

[PATCH 4.14 07/23] net/mlx5: Fix size field in bufferx_reg struct

[Greg Kroah-Hartman]

From: Mohammad Kabat <mohammadkab@nvidia.com>

[ Upstream commit ac77998b7ac3044f0509b097da9637184598980d ]

According to HW spec the field "size" should be 16 bits
in bufferx register.

Fixes: e281682bf294 ("net/mlx5_core: HW data structs/types definitions cleanup")
Signed-off-by: Mohammad Kabat <mohammadkab@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/mlx5/mlx5_ifc.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index c4b8602ea6f5..e0eed46e4039 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -7953,8 +7953,8 @@ struct mlx5_ifc_bufferx_reg_bits {
 	u8         reserved_at_0[0x6];
 	u8         lossy[0x1];
 	u8         epsb[0x1];
-	u8         reserved_at_8[0xc];
-	u8         size[0xc];
+	u8         reserved_at_8[0x8];
+	u8         size[0x10];
 
 	u8         xoff_threshold[0x10];
 	u8         xon_threshold[0x10];
-- 
2.34.1

[PATCH 4.14 08/23] NFC: port100: fix use-after-free in port100_send_complete

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit f80cfe2f26581f188429c12bd937eb905ad3ac7b ]

Syzbot reported UAF in port100_send_complete(). The root case is in
missing usb_kill_urb() calls on error handling path of ->probe function.

port100_send_complete() accesses devm allocated memory which will be
freed on probe failure. We should kill this urbs before returning an
error from probe function to prevent reported use-after-free

Fail log:

BUG: KASAN: use-after-free in port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935
Read of size 1 at addr ffff88801bb59540 by task ksoftirqd/2/26
...
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255
 __kasan_report mm/kasan/report.c:442 [inline]
 kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
 port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935
 __usb_hcd_giveback_urb+0x2b0/0x5c0 drivers/usb/core/hcd.c:1670

...

Allocated by task 1255:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 kasan_set_track mm/kasan/common.c:45 [inline]
 set_alloc_info mm/kasan/common.c:436 [inline]
 ____kasan_kmalloc mm/kasan/common.c:515 [inline]
 ____kasan_kmalloc mm/kasan/common.c:474 [inline]
 __kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:524
 alloc_dr drivers/base/devres.c:116 [inline]
 devm_kmalloc+0x96/0x1d0 drivers/base/devres.c:823
 devm_kzalloc include/linux/device.h:209 [inline]
 port100_probe+0x8a/0x1320 drivers/nfc/port100.c:1502

Freed by task 1255:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 kasan_set_track+0x21/0x30 mm/kasan/common.c:45
 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370
 ____kasan_slab_free mm/kasan/common.c:366 [inline]
 ____kasan_slab_free+0xff/0x140 mm/kasan/common.c:328
 kasan_slab_free include/linux/kasan.h:236 [inline]
 __cache_free mm/slab.c:3437 [inline]
 kfree+0xf8/0x2b0 mm/slab.c:3794
 release_nodes+0x112/0x1a0 drivers/base/devres.c:501
 devres_release_all+0x114/0x190 drivers/base/devres.c:530
 really_probe+0x626/0xcc0 drivers/base/dd.c:670

Reported-and-tested-by: syzbot+16bcb127fb73baeecb14@syzkaller.appspotmail.com
Fixes: 0347a6ab300a ("NFC: port100: Commands mechanism implementation")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220308185007.6987-1-paskripkin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/port100.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/nfc/port100.c b/drivers/nfc/port100.c
index 0f37acec98ab..bc680b8be133 100644
--- a/drivers/nfc/port100.c
+++ b/drivers/nfc/port100.c
@@ -1618,7 +1618,9 @@ static int port100_probe(struct usb_interface *interface,
 	nfc_digital_free_device(dev->nfc_digital_dev);
 
 error:
+	usb_kill_urb(dev->in_urb);
 	usb_free_urb(dev->in_urb);
+	usb_kill_urb(dev->out_urb);
 	usb_free_urb(dev->out_urb);
 	usb_put_dev(dev->udev);
 
-- 
2.34.1

[PATCH 4.14 09/23] gpio: ts4900: Do not set DAT and OE together

[Greg Kroah-Hartman]

From: Mark Featherston <mark@embeddedTS.com>

[ Upstream commit 03fe003547975680fdb9ff5ab0e41cb68276c4f2 ]

This works around an issue with the hardware where both OE and
DAT are exposed in the same register. If both are updated
simultaneously, the harware makes no guarantees that OE or DAT
will actually change in any given order and may result in a
glitch of a few ns on a GPIO pin when changing direction and value
in a single write.

Setting direction to input now only affects OE bit. Setting
direction to output updates DAT first, then OE.

Fixes: 9c6686322d74 ("gpio: add Technologic I2C-FPGA gpio support")
Signed-off-by: Mark Featherston <mark@embeddedTS.com>
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-ts4900.c | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/drivers/gpio/gpio-ts4900.c b/drivers/gpio/gpio-ts4900.c
index 5bd21725e604..930a6098b758 100644
--- a/drivers/gpio/gpio-ts4900.c
+++ b/drivers/gpio/gpio-ts4900.c
@@ -1,7 +1,7 @@
 /*
  * Digital I/O driver for Technologic Systems I2C FPGA Core
  *
- * Copyright (C) 2015 Technologic Systems
+ * Copyright (C) 2015, 2018 Technologic Systems
  * Copyright (C) 2016 Savoir-Faire Linux
  *
  * This program is free software; you can redistribute it and/or
@@ -52,19 +52,33 @@ static int ts4900_gpio_direction_input(struct gpio_chip *chip,
 {
 	struct ts4900_gpio_priv *priv = gpiochip_get_data(chip);
 
-	/*
-	 * This will clear the output enable bit, the other bits are
-	 * dontcare when this is cleared
+	/* Only clear the OE bit here, requires a RMW. Prevents potential issue
+	 * with OE and data getting to the physical pin at different times.
 	 */
-	return regmap_write(priv->regmap, offset, 0);
+	return regmap_update_bits(priv->regmap, offset, TS4900_GPIO_OE, 0);
 }
 
 static int ts4900_gpio_direction_output(struct gpio_chip *chip,
 					unsigned int offset, int value)
 {
 	struct ts4900_gpio_priv *priv = gpiochip_get_data(chip);
+	unsigned int reg;
 	int ret;
 
+	/* If changing from an input to an output, we need to first set the
+	 * proper data bit to what is requested and then set OE bit. This
+	 * prevents a glitch that can occur on the IO line
+	 */
+	regmap_read(priv->regmap, offset, &reg);
+	if (!(reg & TS4900_GPIO_OE)) {
+		if (value)
+			reg = TS4900_GPIO_OUT;
+		else
+			reg &= ~TS4900_GPIO_OUT;
+
+		regmap_write(priv->regmap, offset, reg);
+	}
+
 	if (value)
 		ret = regmap_write(priv->regmap, offset, TS4900_GPIO_OE |
 							 TS4900_GPIO_OUT);
-- 
2.34.1

[PATCH 4.14 10/23] sctp: fix kernel-infoleak for SCTP sockets

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 633593a808980f82d251d0ca89730d8bb8b0220c ]

syzbot reported a kernel infoleak [1] of 4 bytes.

After analysis, it turned out r->idiag_expires is not initialized
if inet_sctp_diag_fill() calls inet_diag_msg_common_fill()

Make sure to clear idiag_timer/idiag_retrans/idiag_expires
and let inet_diag_msg_sctpasoc_fill() fill them again if needed.

[1]

BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:154 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
 instrument_copy_to_user include/linux/instrumented.h:121 [inline]
 copyout lib/iov_iter.c:154 [inline]
 _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
 copy_to_iter include/linux/uio.h:162 [inline]
 simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519
 __skb_datagram_iter+0x2d5/0x11b0 net/core/datagram.c:425
 skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533
 skb_copy_datagram_msg include/linux/skbuff.h:3696 [inline]
 netlink_recvmsg+0x669/0x1c80 net/netlink/af_netlink.c:1977
 sock_recvmsg_nosec net/socket.c:948 [inline]
 sock_recvmsg net/socket.c:966 [inline]
 __sys_recvfrom+0x795/0xa10 net/socket.c:2097
 __do_sys_recvfrom net/socket.c:2115 [inline]
 __se_sys_recvfrom net/socket.c:2111 [inline]
 __x64_sys_recvfrom+0x19d/0x210 net/socket.c:2111
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:737 [inline]
 slab_alloc_node mm/slub.c:3247 [inline]
 __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4975
 kmalloc_reserve net/core/skbuff.c:354 [inline]
 __alloc_skb+0x545/0xf90 net/core/skbuff.c:426
 alloc_skb include/linux/skbuff.h:1158 [inline]
 netlink_dump+0x3e5/0x16c0 net/netlink/af_netlink.c:2248
 __netlink_dump_start+0xcf8/0xe90 net/netlink/af_netlink.c:2373
 netlink_dump_start include/linux/netlink.h:254 [inline]
 inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1341
 sock_diag_rcv_msg+0x24a/0x620
 netlink_rcv_skb+0x40c/0x7e0 net/netlink/af_netlink.c:2494
 sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:277
 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
 netlink_unicast+0x1093/0x1360 net/netlink/af_netlink.c:1343
 netlink_sendmsg+0x14d9/0x1720 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg net/socket.c:725 [inline]
 sock_write_iter+0x594/0x690 net/socket.c:1061
 do_iter_readv_writev+0xa7f/0xc70
 do_iter_write+0x52c/0x1500 fs/read_write.c:851
 vfs_writev fs/read_write.c:924 [inline]
 do_writev+0x645/0xe00 fs/read_write.c:967
 __do_sys_writev fs/read_write.c:1040 [inline]
 __se_sys_writev fs/read_write.c:1037 [inline]
 __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Bytes 68-71 of 2508 are uninitialized
Memory access of size 2508 starts at ffff888114f9b000
Data copied to user address 00007f7fe09ff2e0

CPU: 1 PID: 3478 Comm: syz-executor306 Not tainted 5.17.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20220310001145.297371-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sctp/sctp_diag.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/net/sctp/sctp_diag.c b/net/sctp/sctp_diag.c
index 7c7b476bad31..9c9d6cbdd14f 100644
--- a/net/sctp/sctp_diag.c
+++ b/net/sctp/sctp_diag.c
@@ -45,10 +45,6 @@ static void inet_diag_msg_sctpasoc_fill(struct inet_diag_msg *r,
 		r->idiag_timer = SCTP_EVENT_TIMEOUT_T3_RTX;
 		r->idiag_retrans = asoc->rtx_data_chunks;
 		r->idiag_expires = jiffies_to_msecs(t3_rtx->expires - jiffies);
-	} else {
-		r->idiag_timer = 0;
-		r->idiag_retrans = 0;
-		r->idiag_expires = 0;
 	}
 }
 
@@ -128,13 +124,14 @@ static int inet_sctp_diag_fill(struct sock *sk, struct sctp_association *asoc,
 	r = nlmsg_data(nlh);
 	BUG_ON(!sk_fullsock(sk));
 
+	r->idiag_timer = 0;
+	r->idiag_retrans = 0;
+	r->idiag_expires = 0;
 	if (asoc) {
 		inet_diag_msg_sctpasoc_fill(r, sk, asoc);
 	} else {
 		inet_diag_msg_common_fill(r, sk);
 		r->idiag_state = sk->sk_state;
-		r->idiag_timer = 0;
-		r->idiag_retrans = 0;
 	}
 
 	if (inet_diag_msg_attrs_fill(sk, skb, r, ext, user_ns, net_admin))
-- 
2.34.1

[PATCH 4.14 11/23] net-sysfs: add check for netdevice being present to speed_show

[Greg Kroah-Hartman]

From: suresh kumar <suresh2514@gmail.com>

[ Upstream commit 4224cfd7fb6523f7a9d1c8bb91bb5df1e38eb624 ]

When bringing down the netdevice or system shutdown, a panic can be
triggered while accessing the sysfs path because the device is already
removed.

    [  755.549084] mlx5_core 0000:12:00.1: Shutdown was called
    [  756.404455] mlx5_core 0000:12:00.0: Shutdown was called
    ...
    [  757.937260] BUG: unable to handle kernel NULL pointer dereference at           (null)
    [  758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280

    crash> bt
    ...
    PID: 12649  TASK: ffff8924108f2100  CPU: 1   COMMAND: "amsd"
    ...
     #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778
        [exception RIP: dma_pool_alloc+0x1ab]
        RIP: ffffffff8ee11acb  RSP: ffff89240e1a3968  RFLAGS: 00010046
        RAX: 0000000000000246  RBX: ffff89243d874100  RCX: 0000000000001000
        RDX: 0000000000000000  RSI: 0000000000000246  RDI: ffff89243d874090
        RBP: ffff89240e1a39c0   R8: 000000000001f080   R9: ffff8905ffc03c00
        R10: ffffffffc04680d4  R11: ffffffff8edde9fd  R12: 00000000000080d0
        R13: ffff89243d874090  R14: ffff89243d874080  R15: 0000000000000000
        ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
    #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core]
    #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core]
    #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core]
    #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core]
    #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core]
    #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core]
    #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core]
    #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46
    #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208
    #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3
    #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf
    #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596
    #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10
    #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5
    #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff
    #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f
    #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92

    crash> net_device.state ffff89443b0c0000
      state = 0x5  (__LINK_STATE_START| __LINK_STATE_NOCARRIER)

To prevent this scenario, we also make sure that the netdevice is present.

Signed-off-by: suresh kumar <suresh2514@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/net-sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 7d8c6ba5cbd2..5ff47c5bc453 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -202,7 +202,7 @@ static ssize_t speed_show(struct device *dev,
 	if (!rtnl_trylock())
 		return restart_syscall();
 
-	if (netif_running(netdev)) {
+	if (netif_running(netdev) && netif_device_present(netdev)) {
 		struct ethtool_link_ksettings cmd;
 
 		if (!__ethtool_get_link_ksettings(netdev, &cmd))
-- 
2.34.1

[PATCH 4.14 12/23] Revert "xen-netback: remove hotplug-status once it has served its purpose"

[Greg Kroah-Hartman]

From: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

[ Upstream commit 0f4558ae91870692ce7f509c31c9d6ee721d8cdc ]

This reverts commit 1f2565780e9b7218cf92c7630130e82dcc0fe9c2.

The 'hotplug-status' node should not be removed as long as the vif
device remains configured. Otherwise the xen-netback would wait for
re-running the network script even if it was already called (in case of
the frontent re-connecting). But also, it _should_ be removed when the
vif device is destroyed (for example when unbinding the driver) -
otherwise hotplug script would not configure the device whenever it
re-appear.

Moving removal of the 'hotplug-status' node was a workaround for nothing
calling network script after xen-netback module is reloaded. But when
vif interface is re-created (on xen-netback unbind/bind for example),
the script should be called, regardless of who does that - currently
this case is not handled by the toolstack, and requires manual
script call. Keeping hotplug-status=connected to skip the call is wrong
and leads to not configured interface.

More discussion at
https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe.org/T/#u

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20220222001817.2264967-1-marmarek@invisiblethingslab.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/xen-netback/xenbus.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c
index 9092b55e087f..df2e1ec9e624 100644
--- a/drivers/net/xen-netback/xenbus.c
+++ b/drivers/net/xen-netback/xenbus.c
@@ -499,6 +499,7 @@ static void backend_disconnect(struct backend_info *be)
 		unsigned int queue_index;
 
 		xen_unregister_watchers(vif);
+		xenbus_rm(XBT_NIL, be->dev->nodename, "hotplug-status");
 #ifdef CONFIG_DEBUG_FS
 		xenvif_debugfs_delif(vif);
 #endif /* CONFIG_DEBUG_FS */
-- 
2.34.1

[PATCH 4.14 13/23] Revert "xen-netback: Check for hotplug-status existence before watching"

[Greg Kroah-Hartman]

From: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

[ Upstream commit e8240addd0a3919e0fd7436416afe9aa6429c484 ]

This reverts commit 2afeec08ab5c86ae21952151f726bfe184f6b23d.

The reasoning in the commit was wrong - the code expected to setup the
watch even if 'hotplug-status' didn't exist. In fact, it relied on the
watch being fired the first time - to check if maybe 'hotplug-status' is
already set to 'connected'. Not registering a watch for non-existing
path (which is the case if hotplug script hasn't been executed yet),
made the backend not waiting for the hotplug script to execute. This in
turns, made the netfront think the interface is fully operational, while
in fact it was not (the vif interface on xen-netback side might not be
configured yet).

This was a workaround for 'hotplug-status' erroneously being removed.
But since that is reverted now, the workaround is not necessary either.

More discussion at
https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe.org/T/#u

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Michael Brown <mbrown@fensystems.co.uk>
Link: https://lore.kernel.org/r/20220222001817.2264967-2-marmarek@invisiblethingslab.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/xen-netback/xenbus.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c
index df2e1ec9e624..37b662f0eebc 100644
--- a/drivers/net/xen-netback/xenbus.c
+++ b/drivers/net/xen-netback/xenbus.c
@@ -1044,15 +1044,11 @@ static void connect(struct backend_info *be)
 	xenvif_carrier_on(be->vif);
 
 	unregister_hotplug_status_watch(be);
-	if (xenbus_exists(XBT_NIL, dev->nodename, "hotplug-status")) {
-		err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch,
-					   NULL, hotplug_status_changed,
-					   "%s/%s", dev->nodename,
-					   "hotplug-status");
-		if (err)
-			goto err;
+	err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch, NULL,
+				   hotplug_status_changed,
+				   "%s/%s", dev->nodename, "hotplug-status");
+	if (!err)
 		be->have_hotplug_status_watch = 1;
-	}
 
 	netif_tx_wake_all_queues(be->vif->dev);
 
-- 
2.34.1

[PATCH 4.14 14/23] tracing: Ensure trace buffer is at least 4096 bytes large

[Greg Kroah-Hartman]

From: Sven Schnelle <svens@linux.ibm.com>

[ Upstream commit 7acf3a127bb7c65ff39099afd78960e77b2ca5de ]

Booting the kernel with 'trace_buf_size=1' give a warning at
boot during the ftrace selftests:

[    0.892809] Running postponed tracer tests:
[    0.892893] Testing tracer function:
[    0.901899] Callback from call_rcu_tasks_trace() invoked.
[    0.983829] Callback from call_rcu_tasks_rude() invoked.
[    1.072003] .. bad ring buffer .. corrupted trace buffer ..
[    1.091944] Callback from call_rcu_tasks() invoked.
[    1.097695] PASSED
[    1.097701] Testing dynamic ftrace: .. filter failed count=0 ..FAILED!
[    1.353474] ------------[ cut here ]------------
[    1.353478] WARNING: CPU: 0 PID: 1 at kernel/trace/trace.c:1951 run_tracer_selftest+0x13c/0x1b0

Therefore enforce a minimum of 4096 bytes to make the selftest pass.

Link: https://lkml.kernel.org/r/20220214134456.1751749-1-svens@linux.ibm.com

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index c1da2a4a629a..c728acb6b14c 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1118,10 +1118,12 @@ static int __init set_buf_size(char *str)
 	if (!str)
 		return 0;
 	buf_size = memparse(str, &str);
-	/* nr_entries can not be zero */
-	if (buf_size == 0)
-		return 0;
-	trace_buf_size = buf_size;
+	/*
+	 * nr_entries can not be zero and the startup
+	 * tests require some buffer space. Therefore
+	 * ensure we have at least 4096 bytes of buffer.
+	 */
+	trace_buf_size = max(4096UL, buf_size);
 	return 1;
 }
 __setup("trace_buf_size=", set_buf_size);
-- 
2.34.1

[PATCH 4.14 15/23] selftests/memfd: clean up mapping in mfd_fail_write

[Greg Kroah-Hartman]

From: Mike Kravetz <mike.kravetz@oracle.com>

[ Upstream commit fda153c89af344d21df281009a9d046cf587ea0f ]

Running the memfd script ./run_hugetlbfs_test.sh will often end in error
as follows:

    memfd-hugetlb: CREATE
    memfd-hugetlb: BASIC
    memfd-hugetlb: SEAL-WRITE
    memfd-hugetlb: SEAL-FUTURE-WRITE
    memfd-hugetlb: SEAL-SHRINK
    fallocate(ALLOC) failed: No space left on device
    ./run_hugetlbfs_test.sh: line 60: 166855 Aborted                 (core dumped) ./memfd_test hugetlbfs
    opening: ./mnt/memfd
    fuse: DONE

If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will
allocate 'just enough' pages to run the test.  In the SEAL-FUTURE-WRITE
test the mfd_fail_write routine maps the file, but does not unmap.  As a
result, two hugetlb pages remain reserved for the mapping.  When the
fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb
pages, it is short by the two reserved pages.

Fix by making sure to unmap in mfd_fail_write.

Link: https://lkml.kernel.org/r/20220219004340.56478-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/memfd/memfd_test.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/memfd/memfd_test.c b/tools/testing/selftests/memfd/memfd_test.c
index 845e5f67b6f0..cf4c5276eb06 100644
--- a/tools/testing/selftests/memfd/memfd_test.c
+++ b/tools/testing/selftests/memfd/memfd_test.c
@@ -416,6 +416,7 @@ static void mfd_fail_write(int fd)
 			printf("mmap()+mprotect() didn't fail as expected\n");
 			abort();
 		}
+		munmap(p, mfd_def_size);
 	}
 
 	/* verify PUNCH_HOLE fails */
-- 
2.34.1

[PATCH 4.14 16/23] ARM: Spectre-BHB: provide empty stub for non-config

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

commit 68453767131a5deec1e8f9ac92a9042f929e585d upstream.

When CONFIG_GENERIC_CPU_VULNERABILITIES is not set, references
to spectre_v2_update_state() cause a build error, so provide an
empty stub for that function when the Kconfig option is not set.

Fixes this build error:

  arm-linux-gnueabi-ld: arch/arm/mm/proc-v7-bugs.o: in function `cpu_v7_bugs_init':
  proc-v7-bugs.c:(.text+0x52): undefined reference to `spectre_v2_update_state'
  arm-linux-gnueabi-ld: proc-v7-bugs.c:(.text+0x82): undefined reference to `spectre_v2_update_state'

Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/include/asm/spectre.h |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/arch/arm/include/asm/spectre.h
+++ b/arch/arm/include/asm/spectre.h
@@ -25,7 +25,13 @@ enum {
 	SPECTRE_V2_METHOD_LOOP8 = BIT(__SPECTRE_V2_METHOD_LOOP8),
 };
 
+#ifdef CONFIG_GENERIC_CPU_VULNERABILITIES
 void spectre_v2_update_state(unsigned int state, unsigned int methods);
+#else
+static inline void spectre_v2_update_state(unsigned int state,
+					   unsigned int methods)
+{}
+#endif
 
 int spectre_bhb_update_vectors(unsigned int method);
 

[PATCH 4.14 16/23] ARM: Spectre-BHB: provide empty stub for non-config

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

commit 68453767131a5deec1e8f9ac92a9042f929e585d upstream.

When CONFIG_GENERIC_CPU_VULNERABILITIES is not set, references
to spectre_v2_update_state() cause a build error, so provide an
empty stub for that function when the Kconfig option is not set.

Fixes this build error:

  arm-linux-gnueabi-ld: arch/arm/mm/proc-v7-bugs.o: in function `cpu_v7_bugs_init':
  proc-v7-bugs.c:(.text+0x52): undefined reference to `spectre_v2_update_state'
  arm-linux-gnueabi-ld: proc-v7-bugs.c:(.text+0x82): undefined reference to `spectre_v2_update_state'

Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/include/asm/spectre.h |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/arch/arm/include/asm/spectre.h
+++ b/arch/arm/include/asm/spectre.h
@@ -25,7 +25,13 @@ enum {
 	SPECTRE_V2_METHOD_LOOP8 = BIT(__SPECTRE_V2_METHOD_LOOP8),
 };
 
+#ifdef CONFIG_GENERIC_CPU_VULNERABILITIES
 void spectre_v2_update_state(unsigned int state, unsigned int methods);
+#else
+static inline void spectre_v2_update_state(unsigned int state,
+					   unsigned int methods)
+{}
+#endif
 
 int spectre_bhb_update_vectors(unsigned int method);
 



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 4.14 17/23] staging: gdm724x: fix use after free in gdm_lte_rx()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit fc7f750dc9d102c1ed7bbe4591f991e770c99033 upstream.

The netif_rx_ni() function frees the skb so we can't dereference it to
save the skb->len.

Fixes: 61e121047645 ("staging: gdm7240: adding LTE USB driver")
Cc: stable <stable@vger.kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220228074331.GA13685@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/gdm724x/gdm_lte.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/staging/gdm724x/gdm_lte.c
+++ b/drivers/staging/gdm724x/gdm_lte.c
@@ -85,14 +85,15 @@ static void tx_complete(void *arg)
 
 static int gdm_lte_rx(struct sk_buff *skb, struct nic *nic, int nic_type)
 {
-	int ret;
+	int ret, len;
 
+	len = skb->len + ETH_HLEN;
 	ret = netif_rx_ni(skb);
 	if (ret == NET_RX_DROP) {
 		nic->stats.rx_dropped++;
 	} else {
 		nic->stats.rx_packets++;
-		nic->stats.rx_bytes += skb->len + ETH_HLEN;
+		nic->stats.rx_bytes += len;
 	}
 
 	return 0;

[PATCH 4.14 18/23] KVM: arm64: Reset PMC_EL0 to avoid a panic() on systems with no PMU

[Greg Kroah-Hartman]

From: James Morse <james.morse@arm.com>

The logic in commit 2a5f1b67ec57 "KVM: arm64: Don't access PMCR_EL0 when no
PMU is available" relies on an empty reset handler being benign.  This was
not the case in earlier kernel versions, so the stable backport of this
patch is causing problems.

KVMs behaviour in this area changed over time. In particular, prior to commit
03fdfb269009 ("KVM: arm64: Don't write junk to sysregs on reset"), an empty
reset handler will trigger a warning, as the guest registers have been
poisoned.
Prior to commit 20589c8cc47d ("arm/arm64: KVM: Don't panic on failure to
properly reset system registers"), this warning was a panic().

Instead of reverting the backport, make it write 0 to the sys_reg[] array.
This keeps the reset logic happy, and the dodgy value can't be seen by
the guest as it can't request the emulation.

The original bug was accessing the PMCR_EL0 register on CPUs that don't
implement that feature. There is no known silicon that does this, but
v4.9's ACPI support is unable to find the PMU, so triggers this code:

| Kernel panic - not syncing: Didn't reset vcpu_sys_reg(24)
| CPU: 1 PID: 3055 Comm: lkvm Not tainted 4.9.302-00032-g64e078a56789 #13476
| Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Jul 30 2018
| Call trace:
| [<ffff00000808b4b0>] dump_backtrace+0x0/0x1a0
| [<ffff00000808b664>] show_stack+0x14/0x20
| [<ffff0000088f0e18>] dump_stack+0x98/0xb8
| [<ffff0000088eef08>] panic+0x118/0x274
| [<ffff0000080b50e0>] access_actlr+0x0/0x20
| [<ffff0000080b2620>] kvm_reset_vcpu+0x5c/0xac
| [<ffff0000080ac688>] kvm_arch_vcpu_ioctl+0x3e4/0x490
| [<ffff0000080a382c>] kvm_vcpu_ioctl+0x5b8/0x720
| [<ffff000008201e44>] do_vfs_ioctl+0x2f4/0x884
| [<ffff00000820244c>] SyS_ioctl+0x78/0x9c
| [<ffff000008083a9c>] __sys_trace_return+0x0/0x4

Cc: <stable@vger.kernel.org> # < v5.3 with 2a5f1b67ec57 backported
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kvm/sys_regs.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -471,8 +471,10 @@ static void reset_pmcr(struct kvm_vcpu *
 	u64 pmcr, val;
 
 	/* No PMU available, PMCR_EL0 may UNDEF... */
-	if (!kvm_arm_support_pmu_v3())
+	if (!kvm_arm_support_pmu_v3()) {
+		vcpu_sys_reg(vcpu, PMCR_EL0) = 0;
 		return;
+	}
 
 	pmcr = read_sysreg(pmcr_el0);
 	/*

[PATCH 4.14 19/23] virtio: unexport virtio_finalize_features

[Greg Kroah-Hartman]

From: Michael S. Tsirkin <mst@redhat.com>

commit 838d6d3461db0fdbf33fc5f8a69c27b50b4a46da upstream.

virtio_finalize_features is only used internally within virtio.
No reason to export it.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/virtio/virtio.c |    3 +--
 include/linux/virtio.h  |    1 -
 2 files changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -165,7 +165,7 @@ void virtio_add_status(struct virtio_dev
 }
 EXPORT_SYMBOL_GPL(virtio_add_status);
 
-int virtio_finalize_features(struct virtio_device *dev)
+static int virtio_finalize_features(struct virtio_device *dev)
 {
 	int ret = dev->config->finalize_features(dev);
 	unsigned status;
@@ -185,7 +185,6 @@ int virtio_finalize_features(struct virt
 	}
 	return 0;
 }
-EXPORT_SYMBOL_GPL(virtio_finalize_features);
 
 static int virtio_dev_probe(struct device *_d)
 {
--- a/include/linux/virtio.h
+++ b/include/linux/virtio.h
@@ -151,7 +151,6 @@ void virtio_break_device(struct virtio_d
 void virtio_config_changed(struct virtio_device *dev);
 void virtio_config_disable(struct virtio_device *dev);
 void virtio_config_enable(struct virtio_device *dev);
-int virtio_finalize_features(struct virtio_device *dev);
 #ifdef CONFIG_PM_SLEEP
 int virtio_device_freeze(struct virtio_device *dev);
 int virtio_device_restore(struct virtio_device *dev);

[PATCH 4.14 20/23] virtio: acknowledge all features before access

[Greg Kroah-Hartman]

From: Michael S. Tsirkin <mst@redhat.com>

commit 4fa59ede95195f267101a1b8916992cf3f245cdb upstream.

The feature negotiation was designed in a way that
makes it possible for devices to know which config
fields will be accessed by drivers.

This is broken since commit 404123c2db79 ("virtio: allow drivers to
validate features") with fallout in at least block and net.  We have a
partial work-around in commit 2f9a174f918e ("virtio: write back
F_VERSION_1 before validate") which at least lets devices find out which
format should config space have, but this is a partial fix: guests
should not access config space without acknowledging features since
otherwise we'll never be able to change the config space format.

To fix, split finalize_features from virtio_finalize_features and
call finalize_features with all feature bits before validation,
and then - if validation changed any bits - once again after.

Since virtio_finalize_features no longer writes out features
rename it to virtio_features_ok - since that is what it does:
checks that features are ok with the device.

As a side effect, this also reduces the amount of hypervisor accesses -
we now only acknowledge features once unless we are clearing any
features when validating (which is uncommon).

IRC I think that this was more or less always the intent in the spec but
unfortunately the way the spec is worded does not say this explicitly, I
plan to address this at the spec level, too.

Acked-by: Jason Wang <jasowang@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 404123c2db79 ("virtio: allow drivers to validate features")
Fixes: 2f9a174f918e ("virtio: write back F_VERSION_1 before validate")
Cc: "Halil Pasic" <pasic@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/virtio/virtio.c       |   39 +++++++++++++++++++++------------------
 include/linux/virtio_config.h |    3 ++-
 2 files changed, 23 insertions(+), 19 deletions(-)

--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -165,14 +165,11 @@ void virtio_add_status(struct virtio_dev
 }
 EXPORT_SYMBOL_GPL(virtio_add_status);
 
-static int virtio_finalize_features(struct virtio_device *dev)
+/* Do some validation, then set FEATURES_OK */
+static int virtio_features_ok(struct virtio_device *dev)
 {
-	int ret = dev->config->finalize_features(dev);
 	unsigned status;
 
-	if (ret)
-		return ret;
-
 	if (!virtio_has_feature(dev, VIRTIO_F_VERSION_1))
 		return 0;
 
@@ -221,17 +218,6 @@ static int virtio_dev_probe(struct devic
 		driver_features_legacy = driver_features;
 	}
 
-	/*
-	 * Some devices detect legacy solely via F_VERSION_1. Write
-	 * F_VERSION_1 to force LE config space accesses before FEATURES_OK for
-	 * these when needed.
-	 */
-	if (drv->validate && !virtio_legacy_is_little_endian()
-			  && device_features & BIT_ULL(VIRTIO_F_VERSION_1)) {
-		dev->features = BIT_ULL(VIRTIO_F_VERSION_1);
-		dev->config->finalize_features(dev);
-	}
-
 	if (device_features & (1ULL << VIRTIO_F_VERSION_1))
 		dev->features = driver_features & device_features;
 	else
@@ -242,13 +228,26 @@ static int virtio_dev_probe(struct devic
 		if (device_features & (1ULL << i))
 			__virtio_set_bit(dev, i);
 
+	err = dev->config->finalize_features(dev);
+	if (err)
+		goto err;
+
 	if (drv->validate) {
+		u64 features = dev->features;
+
 		err = drv->validate(dev);
 		if (err)
 			goto err;
+
+		/* Did validation change any features? Then write them again. */
+		if (features != dev->features) {
+			err = dev->config->finalize_features(dev);
+			if (err)
+				goto err;
+		}
 	}
 
-	err = virtio_finalize_features(dev);
+	err = virtio_features_ok(dev);
 	if (err)
 		goto err;
 
@@ -400,7 +399,11 @@ int virtio_device_restore(struct virtio_
 	/* We have a driver! */
 	virtio_add_status(dev, VIRTIO_CONFIG_S_DRIVER);
 
-	ret = virtio_finalize_features(dev);
+	ret = dev->config->finalize_features(dev);
+	if (ret)
+		goto err;
+
+	ret = virtio_features_ok(dev);
 	if (ret)
 		goto err;
 
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -51,8 +51,9 @@ struct irq_affinity;
  *	Returns the first 32 feature bits (all we currently need).
  * @finalize_features: confirm what device features we'll be using.
  *	vdev: the virtio_device
- *	This gives the final feature bits for the device: it can change
+ *	This sends the driver feature bits to the device: it can change
  *	the dev->feature bits if it wants.
+ * Note: despite the name this can be called any number of times.
  *	Returns 0 on success or error status
  * @bus_name: return the bus name associated with the device
  *	vdev: the virtio_device

[PATCH 4.14 21/23] ARM: fix Thumb2 regression with Spectre BHB

[Greg Kroah-Hartman]

From: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

commit 6c7cb60bff7aec24b834343ff433125f469886a3 upstream.

When building for Thumb2, the vectors make use of a local label. Sadly,
the Spectre BHB code also uses a local label with the same number which
results in the Thumb2 reference pointing at the wrong place. Fix this
by changing the number used for the Spectre BHB local label.

Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/kernel/entry-armv.S |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -1071,9 +1071,9 @@ vector_bhb_loop8_\name:
 
 	@ bhb workaround
 	mov	r0, #8
-1:	b	. + 4
+3:	b	. + 4
 	subs	r0, r0, #1
-	bne	1b
+	bne	3b
 	dsb
 	isb
 	b	2b

[PATCH 4.14 22/23] ext4: add check to prevent attempting to resize an fs with sparse_super2

[Greg Kroah-Hartman]

From: Josh Triplett <josh@joshtriplett.org>

commit b1489186cc8391e0c1e342f9fbc3eedf6b944c61 upstream.

The in-kernel ext4 resize code doesn't support filesystem with the
sparse_super2 feature. It fails with errors like this and doesn't finish
the resize:
EXT4-fs (loop0): resizing filesystem from 16640 to 7864320 blocks
EXT4-fs warning (device loop0): verify_reserved_gdb:760: reserved GDT 2 missing grp 1 (32770)
EXT4-fs warning (device loop0): ext4_resize_fs:2111: error (-22) occurred during file system resize
EXT4-fs (loop0): resized filesystem to 2097152

To reproduce:
mkfs.ext4 -b 4096 -I 256 -J size=32 -E resize=$((256*1024*1024)) -O sparse_super2 ext4.img 65M
truncate -s 30G ext4.img
mount ext4.img /mnt
python3 -c 'import fcntl, os, struct ; fd = os.open("/mnt", os.O_RDONLY | os.O_DIRECTORY) ; fcntl.ioctl(fd, 0x40086610, struct.pack("Q", 30 * 1024 * 1024 * 1024 // 4096), False) ; os.close(fd)'
dmesg | tail
e2fsck ext4.img

The userspace resize2fs tool has a check for this case: it checks if the
filesystem has sparse_super2 set and if the kernel provides
/sys/fs/ext4/features/sparse_super2. However, the former check requires
manually reading and parsing the filesystem superblock.

Detect this case in ext4_resize_begin and error out early with a clear
error message.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Link: https://lore.kernel.org/r/74b8ae78405270211943cd7393e65586c5faeed1.1623093259.git.josh@joshtriplett.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/resize.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -74,6 +74,11 @@ int ext4_resize_begin(struct super_block
 		return -EPERM;
 	}
 
+	if (ext4_has_feature_sparse_super2(sb)) {
+		ext4_msg(sb, KERN_ERR, "Online resizing not supported with sparse_super2");
+		return -EOPNOTSUPP;
+	}
+
 	if (test_and_set_bit_lock(EXT4_FLAGS_RESIZING,
 				  &EXT4_SB(sb)->s_ext4_flags))
 		ret = -EBUSY;

[PATCH 4.14 23/23] btrfs: unlock newly allocated extent buffer after error

[Greg Kroah-Hartman]

From: Qu Wenruo <wqu@suse.com>

commit 19ea40dddf1833db868533958ca066f368862211 upstream.

[BUG]
There is a bug report that injected ENOMEM error could leave a tree
block locked while we return to user-space:

  BTRFS info (device loop0): enabling ssd optimizations
  FAULT_INJECTION: forcing a failure.
  name failslab, interval 1, probability 0, space 0, times 0
  CPU: 0 PID: 7579 Comm: syz-executor Not tainted 5.15.0-rc1 #16
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
  rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
  Call Trace:
   __dump_stack lib/dump_stack.c:88 [inline]
   dump_stack_lvl+0x8d/0xcf lib/dump_stack.c:106
   fail_dump lib/fault-inject.c:52 [inline]
   should_fail+0x13c/0x160 lib/fault-inject.c:146
   should_failslab+0x5/0x10 mm/slab_common.c:1328
   slab_pre_alloc_hook.constprop.99+0x4e/0xc0 mm/slab.h:494
   slab_alloc_node mm/slub.c:3120 [inline]
   slab_alloc mm/slub.c:3214 [inline]
   kmem_cache_alloc+0x44/0x280 mm/slub.c:3219
   btrfs_alloc_delayed_extent_op fs/btrfs/delayed-ref.h:299 [inline]
   btrfs_alloc_tree_block+0x38c/0x670 fs/btrfs/extent-tree.c:4833
   __btrfs_cow_block+0x16f/0x7d0 fs/btrfs/ctree.c:415
   btrfs_cow_block+0x12a/0x300 fs/btrfs/ctree.c:570
   btrfs_search_slot+0x6b0/0xee0 fs/btrfs/ctree.c:1768
   btrfs_insert_empty_items+0x80/0xf0 fs/btrfs/ctree.c:3905
   btrfs_new_inode+0x311/0xa60 fs/btrfs/inode.c:6530
   btrfs_create+0x12b/0x270 fs/btrfs/inode.c:6783
   lookup_open+0x660/0x780 fs/namei.c:3282
   open_last_lookups fs/namei.c:3352 [inline]
   path_openat+0x465/0xe20 fs/namei.c:3557
   do_filp_open+0xe3/0x170 fs/namei.c:3588
   do_sys_openat2+0x357/0x4a0 fs/open.c:1200
   do_sys_open+0x87/0xd0 fs/open.c:1216
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x34/0xb0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x44/0xae
  RIP: 0033:0x46ae99
  Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48
  89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d
  01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
  RSP: 002b:00007f46711b9c48 EFLAGS: 00000246 ORIG_RAX: 0000000000000055
  RAX: ffffffffffffffda RBX: 000000000078c0a0 RCX: 000000000046ae99
  RDX: 0000000000000000 RSI: 00000000000000a1 RDI: 0000000020005800
  RBP: 00007f46711b9c80 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000017
  R13: 0000000000000000 R14: 000000000078c0a0 R15: 00007ffc129da6e0

  ================================================
  WARNING: lock held when returning to user space!
  5.15.0-rc1 #16 Not tainted
  ------------------------------------------------
  syz-executor/7579 is leaving the kernel with locks still held!
  1 lock held by syz-executor/7579:
   #0: ffff888104b73da8 (btrfs-tree-01/1){+.+.}-{3:3}, at:
  __btrfs_tree_lock+0x2e/0x1a0 fs/btrfs/locking.c:112

[CAUSE]
In btrfs_alloc_tree_block(), after btrfs_init_new_buffer(), the new
extent buffer @buf is locked, but if later operations like adding
delayed tree ref fail, we just free @buf without unlocking it,
resulting above warning.

[FIX]
Unlock @buf in out_free_buf: label.

Reported-by: Hao Sun <sunhao.th@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CACkBjsZ9O6Zr0KK1yGn=1rQi6Crh1yeCRdTSBxx9R99L4xdn-Q@mail.gmail.com/
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Denis Efremov <denis.e.efremov@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/extent-tree.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -8595,6 +8595,7 @@ struct extent_buffer *btrfs_alloc_tree_b
 out_free_delayed:
 	btrfs_free_delayed_extent_op(extent_op);
 out_free_buf:
+	btrfs_tree_unlock(buf);
 	free_extent_buffer(buf);
 out_free_reserved:
 	btrfs_free_reserved_extent(fs_info, ins.objectid, ins.offset, 0);