From: "José Roberto de Souza" <jose.souza@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH] drm/i915/display/adlp: More voltage swing table updates
Date: Tue, 15 Mar 2022 13:51:22 -0700 [thread overview]
Message-ID: <20220315205122.202701-1-jose.souza@intel.com> (raw)
A few more updates in the alderlake-P voltage swing tables.
eDP HBR3 table was the same as icelake one but now it has changes for
voltage 0 and pre-emphasis 2 line.
And DP tables also had one line change in each.
Bspec: 49291
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
.../drm/i915/display/intel_ddi_buf_trans.c | 22 +++++++++++++++----
1 file changed, 18 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
index 9a2b14927895e..94e64661b4fdb 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
@@ -907,7 +907,7 @@ static const union intel_ddi_buf_trans_entry _adlp_combo_phy_trans_dp_hbr[] = {
{ .icl = { 0xA, 0x4C, 0x3F, 0x00, 0x00 } }, /* 500 500 0.0 */
{ .icl = { 0xC, 0x73, 0x34, 0x00, 0x0B } }, /* 500 700 2.9 */
{ .icl = { 0x6, 0x7F, 0x2F, 0x00, 0x10 } }, /* 500 900 5.1 */
- { .icl = { 0xC, 0x73, 0x3E, 0x00, 0x01 } }, /* 650 700 0.6 */
+ { .icl = { 0xC, 0x7C, 0x3C, 0x00, 0x03 } }, /* 650 700 0.6 */
{ .icl = { 0x6, 0x7F, 0x35, 0x00, 0x0A } }, /* 600 900 3.5 */
{ .icl = { 0x6, 0x7F, 0x3F, 0x00, 0x00 } }, /* 900 900 0.0 */
};
@@ -921,7 +921,7 @@ static const union intel_ddi_buf_trans_entry _adlp_combo_phy_trans_dp_hbr2_hbr3[
/* NT mV Trans mV db */
{ .icl = { 0xA, 0x35, 0x3F, 0x00, 0x00 } }, /* 350 350 0.0 */
{ .icl = { 0xA, 0x4F, 0x37, 0x00, 0x08 } }, /* 350 500 3.1 */
- { .icl = { 0xC, 0x71, 0x2F, 0x00, 0x10 } }, /* 350 700 6.0 */
+ { .icl = { 0xC, 0x71, 0x30, 0x00, 0x0F } }, /* 350 700 6.0 */
{ .icl = { 0x6, 0x7F, 0x2B, 0x00, 0x14 } }, /* 350 900 8.2 */
{ .icl = { 0xA, 0x4C, 0x3F, 0x00, 0x00 } }, /* 500 500 0.0 */
{ .icl = { 0xC, 0x73, 0x34, 0x00, 0x0B } }, /* 500 700 2.9 */
@@ -945,14 +945,28 @@ static const union intel_ddi_buf_trans_entry _adlp_combo_phy_trans_edp_hbr2[] =
{ .icl = { 0x4, 0x7A, 0x38, 0x00, 0x07 } }, /* 350 350 0.0 */
};
+static const union intel_ddi_buf_trans_entry _adlp_combo_phy_trans_dp_hbr2_edp_hbr3[] = {
+ /* NT mV Trans mV db */
+ { .icl = { 0xA, 0x35, 0x3F, 0x00, 0x00 } }, /* 350 350 0.0 */
+ { .icl = { 0xA, 0x4F, 0x37, 0x00, 0x08 } }, /* 350 500 3.1 */
+ { .icl = { 0xC, 0x71, 0x30, 0x00, 0x0f } }, /* 350 700 6.0 */
+ { .icl = { 0x6, 0x7F, 0x2B, 0x00, 0x14 } }, /* 350 900 8.2 */
+ { .icl = { 0xA, 0x4C, 0x3F, 0x00, 0x00 } }, /* 500 500 0.0 */
+ { .icl = { 0xC, 0x73, 0x34, 0x00, 0x0B } }, /* 500 700 2.9 */
+ { .icl = { 0x6, 0x7F, 0x2F, 0x00, 0x10 } }, /* 500 900 5.1 */
+ { .icl = { 0xC, 0x6C, 0x3C, 0x00, 0x03 } }, /* 650 700 0.6 */
+ { .icl = { 0x6, 0x7F, 0x35, 0x00, 0x0A } }, /* 600 900 3.5 */
+ { .icl = { 0x6, 0x7F, 0x3F, 0x00, 0x00 } }, /* 900 900 0.0 */
+};
+
static const struct intel_ddi_buf_trans adlp_combo_phy_trans_dp_hbr2_hbr3 = {
.entries = _adlp_combo_phy_trans_dp_hbr2_hbr3,
.num_entries = ARRAY_SIZE(_adlp_combo_phy_trans_dp_hbr2_hbr3),
};
static const struct intel_ddi_buf_trans adlp_combo_phy_trans_edp_hbr3 = {
- .entries = _icl_combo_phy_trans_dp_hbr2_edp_hbr3,
- .num_entries = ARRAY_SIZE(_icl_combo_phy_trans_dp_hbr2_edp_hbr3),
+ .entries = _adlp_combo_phy_trans_dp_hbr2_edp_hbr3,
+ .num_entries = ARRAY_SIZE(_adlp_combo_phy_trans_dp_hbr2_edp_hbr3),
};
static const struct intel_ddi_buf_trans adlp_combo_phy_trans_edp_up_to_hbr2 = {
--
2.35.1
next reply other threads:[~2022-03-15 20:50 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-15 20:51 José Roberto de Souza [this message]
2022-03-15 21:42 ` [Intel-gfx] ✓ Fi.CI.BAT: success for drm/i915/display/adlp: More voltage swing table updates Patchwork
2022-03-16 1:18 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2022-03-18 15:48 ` [Intel-gfx] [PATCH] " Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220315205122.202701-1-jose.souza@intel.com \
--to=jose.souza@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.