All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jane Malalane <jane.malalane@citrix.com>
To: Xen-devel <xen-devel@lists.xenproject.org>
Cc: "Jane Malalane" <jane.malalane@citrix.com>,
	"Wei Liu" <wl@xen.org>,
	"Anthony PERARD" <anthony.perard@citrix.com>,
	"Juergen Gross" <jgross@suse.com>,
	"Andrew Cooper" <andrew.cooper3@citrix.com>,
	"George Dunlap" <george.dunlap@citrix.com>,
	"Jan Beulich" <jbeulich@suse.com>,
	"Julien Grall" <julien@xen.org>,
	"Stefano Stabellini" <sstabellini@kernel.org>,
	"Volodymyr Babchuk" <Volodymyr_Babchuk@epam.com>,
	"Bertrand Marquis" <bertrand.marquis@arm.com>,
	"Jun Nakajima" <jun.nakajima@intel.com>,
	"Kevin Tian" <kevin.tian@intel.com>,
	"Roger Pau Monné" <roger.pau@citrix.com>
Subject: [PATCH v8 1/2] xen+tools: Report Interrupt Controller Virtualization capabilities on x86
Date: Wed, 16 Mar 2022 09:13:14 +0000	[thread overview]
Message-ID: <20220316091315.19281-2-jane.malalane@citrix.com> (raw)
In-Reply-To: <20220316091315.19281-1-jane.malalane@citrix.com>

Add XEN_SYSCTL_PHYSCAP_X86_ASSISTED_XAPIC and
XEN_SYSCTL_PHYSCAP_X86_ASSISTED_X2APIC to report accelerated xAPIC and
x2APIC, on x86 hardware. This is so that xAPIC and x2APIC virtualization
can subsequently be enabled on a per-domain basis.
No such features are currently implemented on AMD hardware.

HW assisted xAPIC virtualization will be reported if HW, at the
minimum, supports virtualize_apic_accesses as this feature alone means
that an access to the APIC page will cause an APIC-access VM exit. An
APIC-access VM exit provides a VMM with information about the access
causing the VM exit, unlike a regular EPT fault, thus simplifying some
internal handling.

HW assisted x2APIC virtualization will be reported if HW supports
virtualize_x2apic_mode and, at least, either apic_reg_virt or
virtual_intr_delivery. This also means that
sysctl follows the conditionals in vmx_vlapic_msr_changed().

For that purpose, also add an arch-specific "capabilities" parameter
to struct xen_sysctl_physinfo.

Note that this interface is intended to be compatible with AMD so that
AVIC support can be introduced in a future patch. Unlike Intel that
has multiple controls for APIC Virtualization, AMD has one global
'AVIC Enable' control bit, so fine-graining of APIC virtualization
control cannot be done on a common interface.

Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
---
CC: Wei Liu <wl@xen.org>
CC: Anthony PERARD <anthony.perard@citrix.com>
CC: Juergen Gross <jgross@suse.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
CC: George Dunlap <george.dunlap@citrix.com>
CC: Jan Beulich <jbeulich@suse.com>
CC: Julien Grall <julien@xen.org>
CC: Stefano Stabellini <sstabellini@kernel.org>
CC: Volodymyr Babchuk <Volodymyr_Babchuk@epam.com>
CC: Bertrand Marquis <bertrand.marquis@arm.com>
CC: Jun Nakajima <jun.nakajima@intel.com>
CC: Kevin Tian <kevin.tian@intel.com>
CC: "Roger Pau Monné" <roger.pau@citrix.com>

v8:
 * Improve commit message

v7:
 * Make sure assisted_x{2}apic_available evaluates to false, to ensure
   Xen builds, when !CONFIG_HVM
 * Fix coding style issues

v6:
 * Limit abi check to x86
 * Fix coding style issue

v5:
 * Have assisted_xapic_available solely depend on
   cpu_has_vmx_virtualize_apic_accesses and assisted_x2apic_available
   depend on cpu_has_vmx_virtualize_x2apic_mode and
   cpu_has_vmx_apic_reg_virt OR cpu_has_vmx_virtual_intr_delivery

v4:
 * Fallback to the original v2/v1 conditions for setting
   assisted_xapic_available and assisted_x2apic_available so that in
   the future APIC virtualization can be exposed on AMD hardware
   since fine-graining of "AVIC" is not supported, i.e., AMD solely
   uses "AVIC Enable". This also means that sysctl mimics what's
   exposed in CPUID

v3:
 * Define XEN_SYSCTL_PHYSCAP_ARCH_MAX for ABI checking and actually
   set "arch_capbilities", via a call to c_bitmap_to_ocaml_list()
 * Have assisted_x2apic_available only depend on
   cpu_has_vmx_virtualize_x2apic_mode

v2:
 * Use one macro LIBXL_HAVE_PHYSINFO_ASSISTED_APIC instead of two
 * Pass xcpyshinfo as a pointer in libxl__arch_get_physinfo
 * Set assisted_x{2}apic_available to be conditional upon "bsp" and
   annotate it with __ro_after_init
 * Change XEN_SYSCTL_PHYSCAP_ARCH_ASSISTED_X{2}APIC to
   _X86_ASSISTED_X{2}APIC
 * Keep XEN_SYSCTL_PHYSCAP_X86_ASSISTED_X{2}APIC contained within
   sysctl.h
 * Fix padding introduced in struct xen_sysctl_physinfo and bump
   XEN_SYSCTL_INTERFACE_VERSION
---
 tools/golang/xenlight/helpers.gen.go |  4 ++++
 tools/golang/xenlight/types.gen.go   |  2 ++
 tools/include/libxl.h                |  7 +++++++
 tools/libs/light/libxl.c             |  3 +++
 tools/libs/light/libxl_arch.h        |  4 ++++
 tools/libs/light/libxl_arm.c         |  5 +++++
 tools/libs/light/libxl_types.idl     |  2 ++
 tools/libs/light/libxl_x86.c         | 11 +++++++++++
 tools/ocaml/libs/xc/xenctrl.ml       |  5 +++++
 tools/ocaml/libs/xc/xenctrl.mli      |  5 +++++
 tools/ocaml/libs/xc/xenctrl_stubs.c  | 15 +++++++++++++--
 tools/xl/xl_info.c                   |  6 ++++--
 xen/arch/x86/hvm/hvm.c               |  3 +++
 xen/arch/x86/hvm/vmx/vmcs.c          |  9 +++++++++
 xen/arch/x86/include/asm/hvm/hvm.h   |  5 +++++
 xen/arch/x86/sysctl.c                |  4 ++++
 xen/include/public/sysctl.h          | 11 ++++++++++-
 17 files changed, 96 insertions(+), 5 deletions(-)

diff --git a/tools/golang/xenlight/helpers.gen.go b/tools/golang/xenlight/helpers.gen.go
index b746ff1081..dd4e6c9f14 100644
--- a/tools/golang/xenlight/helpers.gen.go
+++ b/tools/golang/xenlight/helpers.gen.go
@@ -3373,6 +3373,8 @@ x.CapVmtrace = bool(xc.cap_vmtrace)
 x.CapVpmu = bool(xc.cap_vpmu)
 x.CapGnttabV1 = bool(xc.cap_gnttab_v1)
 x.CapGnttabV2 = bool(xc.cap_gnttab_v2)
+x.CapAssistedXapic = bool(xc.cap_assisted_xapic)
+x.CapAssistedX2Apic = bool(xc.cap_assisted_x2apic)
 
  return nil}
 
@@ -3407,6 +3409,8 @@ xc.cap_vmtrace = C.bool(x.CapVmtrace)
 xc.cap_vpmu = C.bool(x.CapVpmu)
 xc.cap_gnttab_v1 = C.bool(x.CapGnttabV1)
 xc.cap_gnttab_v2 = C.bool(x.CapGnttabV2)
+xc.cap_assisted_xapic = C.bool(x.CapAssistedXapic)
+xc.cap_assisted_x2apic = C.bool(x.CapAssistedX2Apic)
 
  return nil
  }
diff --git a/tools/golang/xenlight/types.gen.go b/tools/golang/xenlight/types.gen.go
index b1e84d5258..87be46c745 100644
--- a/tools/golang/xenlight/types.gen.go
+++ b/tools/golang/xenlight/types.gen.go
@@ -1014,6 +1014,8 @@ CapVmtrace bool
 CapVpmu bool
 CapGnttabV1 bool
 CapGnttabV2 bool
+CapAssistedXapic bool
+CapAssistedX2Apic bool
 }
 
 type Connectorinfo struct {
diff --git a/tools/include/libxl.h b/tools/include/libxl.h
index 51a9b6cfac..94e6355822 100644
--- a/tools/include/libxl.h
+++ b/tools/include/libxl.h
@@ -528,6 +528,13 @@
 #define LIBXL_HAVE_MAX_GRANT_VERSION 1
 
 /*
+ * LIBXL_HAVE_PHYSINFO_ASSISTED_APIC indicates that libxl_physinfo has
+ * cap_assisted_xapic and cap_assisted_x2apic fields, which indicates
+ * the availability of x{2}APIC hardware assisted virtualization.
+ */
+#define LIBXL_HAVE_PHYSINFO_ASSISTED_APIC 1
+
+/*
  * libxl ABI compatibility
  *
  * The only guarantee which libxl makes regarding ABI compatibility
diff --git a/tools/libs/light/libxl.c b/tools/libs/light/libxl.c
index a0bf7d186f..6d699951e2 100644
--- a/tools/libs/light/libxl.c
+++ b/tools/libs/light/libxl.c
@@ -15,6 +15,7 @@
 #include "libxl_osdeps.h"
 
 #include "libxl_internal.h"
+#include "libxl_arch.h"
 
 int libxl_ctx_alloc(libxl_ctx **pctx, int version,
                     unsigned flags, xentoollog_logger * lg)
@@ -410,6 +411,8 @@ int libxl_get_physinfo(libxl_ctx *ctx, libxl_physinfo *physinfo)
     physinfo->cap_gnttab_v2 =
         !!(xcphysinfo.capabilities & XEN_SYSCTL_PHYSCAP_gnttab_v2);
 
+    libxl__arch_get_physinfo(physinfo, &xcphysinfo);
+
     GC_FREE;
     return 0;
 }
diff --git a/tools/libs/light/libxl_arch.h b/tools/libs/light/libxl_arch.h
index 1522ecb97f..207ceac6a1 100644
--- a/tools/libs/light/libxl_arch.h
+++ b/tools/libs/light/libxl_arch.h
@@ -86,6 +86,10 @@ int libxl__arch_extra_memory(libxl__gc *gc,
                              uint64_t *out);
 
 _hidden
+void libxl__arch_get_physinfo(libxl_physinfo *physinfo,
+                              const xc_physinfo_t *xcphysinfo);
+
+_hidden
 void libxl__arch_update_domain_config(libxl__gc *gc,
                                       libxl_domain_config *dst,
                                       const libxl_domain_config *src);
diff --git a/tools/libs/light/libxl_arm.c b/tools/libs/light/libxl_arm.c
index eef1de0939..39fdca1b49 100644
--- a/tools/libs/light/libxl_arm.c
+++ b/tools/libs/light/libxl_arm.c
@@ -1431,6 +1431,11 @@ int libxl__arch_passthrough_mode_setdefault(libxl__gc *gc,
     return rc;
 }
 
+void libxl__arch_get_physinfo(libxl_physinfo *physinfo,
+                              const xc_physinfo_t *xcphysinfo)
+{
+}
+
 void libxl__arch_update_domain_config(libxl__gc *gc,
                                       libxl_domain_config *dst,
                                       const libxl_domain_config *src)
diff --git a/tools/libs/light/libxl_types.idl b/tools/libs/light/libxl_types.idl
index 2a42da2f7d..42ac6c357b 100644
--- a/tools/libs/light/libxl_types.idl
+++ b/tools/libs/light/libxl_types.idl
@@ -1068,6 +1068,8 @@ libxl_physinfo = Struct("physinfo", [
     ("cap_vpmu", bool),
     ("cap_gnttab_v1", bool),
     ("cap_gnttab_v2", bool),
+    ("cap_assisted_xapic", bool),
+    ("cap_assisted_x2apic", bool),
     ], dir=DIR_OUT)
 
 libxl_connectorinfo = Struct("connectorinfo", [
diff --git a/tools/libs/light/libxl_x86.c b/tools/libs/light/libxl_x86.c
index 1feadebb18..e0a06ecfe3 100644
--- a/tools/libs/light/libxl_x86.c
+++ b/tools/libs/light/libxl_x86.c
@@ -866,6 +866,17 @@ int libxl__arch_passthrough_mode_setdefault(libxl__gc *gc,
     return rc;
 }
 
+void libxl__arch_get_physinfo(libxl_physinfo *physinfo,
+                              const xc_physinfo_t *xcphysinfo)
+{
+    physinfo->cap_assisted_xapic =
+        !!(xcphysinfo->arch_capabilities &
+           XEN_SYSCTL_PHYSCAP_X86_ASSISTED_XAPIC);
+    physinfo->cap_assisted_x2apic =
+        !!(xcphysinfo->arch_capabilities &
+           XEN_SYSCTL_PHYSCAP_X86_ASSISTED_X2APIC);
+}
+
 void libxl__arch_update_domain_config(libxl__gc *gc,
                                       libxl_domain_config *dst,
                                       const libxl_domain_config *src)
diff --git a/tools/ocaml/libs/xc/xenctrl.ml b/tools/ocaml/libs/xc/xenctrl.ml
index 7503031d8f..712456e098 100644
--- a/tools/ocaml/libs/xc/xenctrl.ml
+++ b/tools/ocaml/libs/xc/xenctrl.ml
@@ -127,6 +127,10 @@ type physinfo_cap_flag =
 	| CAP_Gnttab_v1
 	| CAP_Gnttab_v2
 
+type physinfo_arch_cap_flag =
+	| CAP_X86_ASSISTED_XAPIC
+	| CAP_X86_ASSISTED_X2APIC
+
 type physinfo =
 {
 	threads_per_core : int;
@@ -140,6 +144,7 @@ type physinfo =
 	(* XXX hw_cap *)
 	capabilities     : physinfo_cap_flag list;
 	max_nr_cpus      : int;
+	arch_capabilities : physinfo_arch_cap_flag list;
 }
 
 type version =
diff --git a/tools/ocaml/libs/xc/xenctrl.mli b/tools/ocaml/libs/xc/xenctrl.mli
index d1d9c9247a..b034434f68 100644
--- a/tools/ocaml/libs/xc/xenctrl.mli
+++ b/tools/ocaml/libs/xc/xenctrl.mli
@@ -112,6 +112,10 @@ type physinfo_cap_flag =
   | CAP_Gnttab_v1
   | CAP_Gnttab_v2
 
+type physinfo_arch_cap_flag =
+  | CAP_X86_ASSISTED_XAPIC
+  | CAP_X86_ASSISTED_X2APIC
+
 type physinfo = {
   threads_per_core : int;
   cores_per_socket : int;
@@ -123,6 +127,7 @@ type physinfo = {
   scrub_pages      : nativeint;
   capabilities     : physinfo_cap_flag list;
   max_nr_cpus      : int; (** compile-time max possible number of nr_cpus *)
+  arch_capabilities : physinfo_arch_cap_flag list;
 }
 type version = { major : int; minor : int; extra : string; }
 type compile_info = {
diff --git a/tools/ocaml/libs/xc/xenctrl_stubs.c b/tools/ocaml/libs/xc/xenctrl_stubs.c
index 5b4fe72c8d..7e9c32ad1b 100644
--- a/tools/ocaml/libs/xc/xenctrl_stubs.c
+++ b/tools/ocaml/libs/xc/xenctrl_stubs.c
@@ -712,7 +712,7 @@ CAMLprim value stub_xc_send_debug_keys(value xch, value keys)
 CAMLprim value stub_xc_physinfo(value xch)
 {
 	CAMLparam1(xch);
-	CAMLlocal2(physinfo, cap_list);
+	CAMLlocal3(physinfo, cap_list, arch_cap_list);
 	xc_physinfo_t c_physinfo;
 	int r;
 
@@ -731,7 +731,7 @@ CAMLprim value stub_xc_physinfo(value xch)
 		/* ! XEN_SYSCTL_PHYSCAP_ XEN_SYSCTL_PHYSCAP_MAX max */
 		(c_physinfo.capabilities);
 
-	physinfo = caml_alloc_tuple(10);
+	physinfo = caml_alloc_tuple(11);
 	Store_field(physinfo, 0, Val_int(c_physinfo.threads_per_core));
 	Store_field(physinfo, 1, Val_int(c_physinfo.cores_per_socket));
 	Store_field(physinfo, 2, Val_int(c_physinfo.nr_cpus));
@@ -743,6 +743,17 @@ CAMLprim value stub_xc_physinfo(value xch)
 	Store_field(physinfo, 8, cap_list);
 	Store_field(physinfo, 9, Val_int(c_physinfo.max_cpu_id + 1));
 
+#if defined(__i386__) || defined(__x86_64__)
+	/*
+	 * arch_capabilities: physinfo_arch_cap_flag list;
+	 */
+	arch_cap_list = c_bitmap_to_ocaml_list
+		/* ! physinfo_arch_cap_flag CAP_ none */
+		/* ! XEN_SYSCTL_PHYSCAP_ XEN_SYSCTL_PHYSCAP_X86_MAX max */
+		(c_physinfo.arch_capabilities);
+	Store_field(physinfo, 10, arch_cap_list);
+#endif
+
 	CAMLreturn(physinfo);
 }
 
diff --git a/tools/xl/xl_info.c b/tools/xl/xl_info.c
index 712b7638b0..3205270754 100644
--- a/tools/xl/xl_info.c
+++ b/tools/xl/xl_info.c
@@ -210,7 +210,7 @@ static void output_physinfo(void)
          info.hw_cap[4], info.hw_cap[5], info.hw_cap[6], info.hw_cap[7]
         );
 
-    maybe_printf("virt_caps              :%s%s%s%s%s%s%s%s%s%s%s\n",
+    maybe_printf("virt_caps              :%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
          info.cap_pv ? " pv" : "",
          info.cap_hvm ? " hvm" : "",
          info.cap_hvm && info.cap_hvm_directio ? " hvm_directio" : "",
@@ -221,7 +221,9 @@ static void output_physinfo(void)
          info.cap_vmtrace ? " vmtrace" : "",
          info.cap_vpmu ? " vpmu" : "",
          info.cap_gnttab_v1 ? " gnttab-v1" : "",
-         info.cap_gnttab_v2 ? " gnttab-v2" : ""
+         info.cap_gnttab_v2 ? " gnttab-v2" : "",
+         info.cap_assisted_xapic ? " assisted_xapic" : "",
+         info.cap_assisted_x2apic ? " assisted_x2apic" : ""
         );
 
     vinfo = libxl_get_version_info(ctx);
diff --git a/xen/arch/x86/hvm/hvm.c b/xen/arch/x86/hvm/hvm.c
index 709a4191ef..e5dde9f8ce 100644
--- a/xen/arch/x86/hvm/hvm.c
+++ b/xen/arch/x86/hvm/hvm.c
@@ -117,6 +117,9 @@ static const char __initconst warning_hvm_fep[] =
 static bool_t __initdata opt_altp2m_enabled = 0;
 boolean_param("altp2m", opt_altp2m_enabled);
 
+bool __ro_after_init assisted_xapic_available;
+bool __ro_after_init assisted_x2apic_available;
+
 static int cf_check cpu_callback(
     struct notifier_block *nfb, unsigned long action, void *hcpu)
 {
diff --git a/xen/arch/x86/hvm/vmx/vmcs.c b/xen/arch/x86/hvm/vmx/vmcs.c
index e1e1fa14e6..77ce0b2121 100644
--- a/xen/arch/x86/hvm/vmx/vmcs.c
+++ b/xen/arch/x86/hvm/vmx/vmcs.c
@@ -343,6 +343,15 @@ static int vmx_init_vmcs_config(bool bsp)
             MSR_IA32_VMX_PROCBASED_CTLS2, &mismatch);
     }
 
+    /* Check whether hardware supports accelerated xapic and x2apic. */
+    if ( bsp )
+    {
+        assisted_xapic_available = cpu_has_vmx_virtualize_apic_accesses;
+        assisted_x2apic_available = cpu_has_vmx_virtualize_x2apic_mode &&
+                                    (cpu_has_vmx_apic_reg_virt ||
+                                     cpu_has_vmx_virtual_intr_delivery);
+    }
+
     /* The IA32_VMX_EPT_VPID_CAP MSR exists only when EPT or VPID available */
     if ( _vmx_secondary_exec_control & (SECONDARY_EXEC_ENABLE_EPT |
                                         SECONDARY_EXEC_ENABLE_VPID) )
diff --git a/xen/arch/x86/include/asm/hvm/hvm.h b/xen/arch/x86/include/asm/hvm/hvm.h
index 5b7ec0cf69..e0d9348878 100644
--- a/xen/arch/x86/include/asm/hvm/hvm.h
+++ b/xen/arch/x86/include/asm/hvm/hvm.h
@@ -373,6 +373,9 @@ int hvm_get_param(struct domain *d, uint32_t index, uint64_t *value);
 #define hvm_tsc_scaling_ratio(d) \
     ((d)->arch.hvm.tsc_scaling_ratio)
 
+extern bool assisted_xapic_available;
+extern bool assisted_x2apic_available;
+
 #define hvm_get_guest_time(v) hvm_get_guest_time_fixed(v, 0)
 
 #define hvm_paging_enabled(v) \
@@ -872,6 +875,8 @@ static inline void hvm_set_reg(struct vcpu *v, unsigned int reg, uint64_t val)
 #define hvm_tsc_scaling_supported false
 #define hap_has_1gb false
 #define hap_has_2mb false
+#define assisted_xapic_available false
+#define assisted_x2apic_available false
 
 #define hvm_paging_enabled(v) ((void)(v), false)
 #define hvm_wp_enabled(v) ((void)(v), false)
diff --git a/xen/arch/x86/sysctl.c b/xen/arch/x86/sysctl.c
index f82abc2488..716525f72f 100644
--- a/xen/arch/x86/sysctl.c
+++ b/xen/arch/x86/sysctl.c
@@ -135,6 +135,10 @@ void arch_do_physinfo(struct xen_sysctl_physinfo *pi)
         pi->capabilities |= XEN_SYSCTL_PHYSCAP_hap;
     if ( IS_ENABLED(CONFIG_SHADOW_PAGING) )
         pi->capabilities |= XEN_SYSCTL_PHYSCAP_shadow;
+    if ( assisted_xapic_available )
+        pi->arch_capabilities |= XEN_SYSCTL_PHYSCAP_X86_ASSISTED_XAPIC;
+    if ( assisted_x2apic_available )
+        pi->arch_capabilities |= XEN_SYSCTL_PHYSCAP_X86_ASSISTED_X2APIC;
 }
 
 long arch_do_sysctl(
diff --git a/xen/include/public/sysctl.h b/xen/include/public/sysctl.h
index 55252e97f2..fbb9912067 100644
--- a/xen/include/public/sysctl.h
+++ b/xen/include/public/sysctl.h
@@ -35,7 +35,7 @@
 #include "domctl.h"
 #include "physdev.h"
 
-#define XEN_SYSCTL_INTERFACE_VERSION 0x00000014
+#define XEN_SYSCTL_INTERFACE_VERSION 0x00000015
 
 /*
  * Read console content from Xen buffer ring.
@@ -111,6 +111,13 @@ struct xen_sysctl_tbuf_op {
 /* Max XEN_SYSCTL_PHYSCAP_* constant.  Used for ABI checking. */
 #define XEN_SYSCTL_PHYSCAP_MAX XEN_SYSCTL_PHYSCAP_gnttab_v2
 
+/* The platform supports x{2}apic hardware assisted emulation. */
+#define XEN_SYSCTL_PHYSCAP_X86_ASSISTED_XAPIC  (1u << 0)
+#define XEN_SYSCTL_PHYSCAP_X86_ASSISTED_X2APIC (1u << 1)
+
+/* Max XEN_SYSCTL_PHYSCAP_X86__* constant. Used for ABI checking. */
+#define XEN_SYSCTL_PHYSCAP_X86_MAX XEN_SYSCTL_PHYSCAP_X86_ASSISTED_X2APIC
+
 struct xen_sysctl_physinfo {
     uint32_t threads_per_core;
     uint32_t cores_per_socket;
@@ -120,6 +127,8 @@ struct xen_sysctl_physinfo {
     uint32_t max_node_id; /* Largest possible node ID on this host */
     uint32_t cpu_khz;
     uint32_t capabilities;/* XEN_SYSCTL_PHYSCAP_??? */
+    uint32_t arch_capabilities;/* XEN_SYSCTL_PHYSCAP_{X86,ARM,...}_??? */
+    uint32_t pad;
     uint64_aligned_t total_pages;
     uint64_aligned_t free_pages;
     uint64_aligned_t scrub_pages;
-- 
2.11.0



  reply	other threads:[~2022-03-16  9:14 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-16  9:13 [PATCH v8 0/2] xen: Report and use hardware APIC virtualization capabilities Jane Malalane
2022-03-16  9:13 ` Jane Malalane [this message]
2022-03-17  6:12   ` [PATCH v8 1/2] xen+tools: Report Interrupt Controller Virtualization capabilities on x86 Tian, Kevin
2022-03-23 11:30   ` Roger Pau Monné
2022-03-31 10:58     ` Jane Malalane
2022-03-16  9:13 ` [PATCH v8 2/2] x86/xen: Allow per-domain usage of hardware virtualized APIC Jane Malalane
2022-03-17  8:58   ` Roger Pau Monné
2022-03-23 11:57     ` Roger Pau Monné

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220316091315.19281-2-jane.malalane@citrix.com \
    --to=jane.malalane@citrix.com \
    --cc=Volodymyr_Babchuk@epam.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=anthony.perard@citrix.com \
    --cc=bertrand.marquis@arm.com \
    --cc=george.dunlap@citrix.com \
    --cc=jbeulich@suse.com \
    --cc=jgross@suse.com \
    --cc=julien@xen.org \
    --cc=jun.nakajima@intel.com \
    --cc=kevin.tian@intel.com \
    --cc=roger.pau@citrix.com \
    --cc=sstabellini@kernel.org \
    --cc=wl@xen.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.