[PATCH v2] can: m_can: m_can_tx_handler(): fix use after free of skb

[Marc Kleine-Budde <mkl@pengutronix.de>]

can_put_echo_skb() will clone skb then free the skb. Move the
can_put_echo_skb() for the m_can version 3.0.x directly before the
start of the xmit in hardware, similar to the 3.1.x branch.

Reported-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---

Hello,

picking up Hangyu Hua's work from:

| https://lore.kernel.org/all/20220317030143.14668-1-hbh25y@gmail.com/

Instead of using a temporary variable, move the can_put_echo_skb() instead.

regads,
Marc

 drivers/net/can/m_can/m_can.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 1a4b56f6fa8c..b3b5bc1c803b 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1637,8 +1637,6 @@ static netdev_tx_t m_can_tx_handler(struct m_can_classdev *cdev)
 		if (err)
 			goto out_fail;
 
-		can_put_echo_skb(skb, dev, 0, 0);
-
 		if (cdev->can.ctrlmode & CAN_CTRLMODE_FD) {
 			cccr = m_can_read(cdev, M_CAN_CCCR);
 			cccr &= ~CCCR_CMR_MASK;
@@ -1655,6 +1653,9 @@ static netdev_tx_t m_can_tx_handler(struct m_can_classdev *cdev)
 			m_can_write(cdev, M_CAN_CCCR, cccr);
 		}
 		m_can_write(cdev, M_CAN_TXBTIE, 0x1);
+
+		can_put_echo_skb(skb, dev, 0, 0);
+
 		m_can_write(cdev, M_CAN_TXBAR, 0x1);
 		/* End of xmit function for version 3.0.x */
 	} else {
-- 
2.35.1