All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Alistair Francis <alistair@alistair23.me>
Cc: shawnguo@kernel.org, linux@roeck-us.net,
	linux-watchdog@vger.kernel.org, wim@linux-watchdog.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	kernel@pengutronix.de, linux-imx@nxp.com, festevam@gmail.com,
	robh+dt@kernel.org
Subject: Re: [PATCH v4] watchdog: imx2_wdg: Allow ping on suspend
Date: Mon, 28 Mar 2022 10:01:11 +0200	[thread overview]
Message-ID: <20220328080111.GD12181@pengutronix.de> (raw)
In-Reply-To: <20220323115752.360409-1-alistair@alistair23.me>

Hi,

On Wed, Mar 23, 2022 at 09:57:52PM +1000, Alistair Francis wrote:
> The i.MX watchdog cannot be disabled by software once it has been
> enabled. This means that it can't be stopped before suspend.
> 
> For systems that enter low power mode this is fine, as the watchdog will
> be automatically stopped by hardware in low power mode. Not all i.MX
> platforms support low power mode in the mainline kernel. For example the
> i.MX7D does not enter low power mode and so will be rebooted 2 minutes
> after entering sleep states.
> 
> This patch introduces a device tree property "fsl,ping-during-suspend"
> that can be used to enable ping on suspend support for these systems.

This doesn't match the code anymore.

Sascha

> 
> Signed-off-by: Alistair Francis <alistair@alistair23.me>
> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
>  drivers/watchdog/imx2_wdt.c | 27 ++++++++++++++++++++-------
>  1 file changed, 20 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
> index 51bfb796898b..d0c5d47ddede 100644
> --- a/drivers/watchdog/imx2_wdt.c
> +++ b/drivers/watchdog/imx2_wdt.c
> @@ -66,6 +66,7 @@ struct imx2_wdt_device {
>  	struct watchdog_device wdog;
>  	bool ext_reset;
>  	bool clk_is_on;
> +	bool no_ping;
>  };
>  
>  static bool nowayout = WATCHDOG_NOWAYOUT;
> @@ -312,12 +313,18 @@ static int __init imx2_wdt_probe(struct platform_device *pdev)
>  
>  	wdev->ext_reset = of_property_read_bool(dev->of_node,
>  						"fsl,ext-reset-output");
> +	/*
> +	 * The i.MX7D doesn't support low power mode, so we need to ping the watchdog
> +	 * during suspend.
> +	 */
> +	wdev->no_ping = !of_device_is_compatible(dev->of_node, "fsl,imx7d-wdt");
>  	platform_set_drvdata(pdev, wdog);
>  	watchdog_set_drvdata(wdog, wdev);
>  	watchdog_set_nowayout(wdog, nowayout);
>  	watchdog_set_restart_priority(wdog, 128);
>  	watchdog_init_timeout(wdog, timeout, dev);
> -	watchdog_stop_ping_on_suspend(wdog);
> +	if (wdev->no_ping)
> +		watchdog_stop_ping_on_suspend(wdog);
>  
>  	if (imx2_wdt_is_running(wdev)) {
>  		imx2_wdt_set_timeout(wdog, wdog->timeout);
> @@ -366,9 +373,11 @@ static int __maybe_unused imx2_wdt_suspend(struct device *dev)
>  		imx2_wdt_ping(wdog);
>  	}
>  
> -	clk_disable_unprepare(wdev->clk);
> +	if (wdev->no_ping) {
> +		clk_disable_unprepare(wdev->clk);
>  
> -	wdev->clk_is_on = false;
> +		wdev->clk_is_on = false;
> +	}
>  
>  	return 0;
>  }
> @@ -380,11 +389,14 @@ static int __maybe_unused imx2_wdt_resume(struct device *dev)
>  	struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
>  	int ret;
>  
> -	ret = clk_prepare_enable(wdev->clk);
> -	if (ret)
> -		return ret;
> +	if (wdev->no_ping) {
> +		ret = clk_prepare_enable(wdev->clk);
>  
> -	wdev->clk_is_on = true;
> +		if (ret)
> +			return ret;
> +
> +		wdev->clk_is_on = true;
> +	}
>  
>  	if (watchdog_active(wdog) && !imx2_wdt_is_running(wdev)) {
>  		/*
> @@ -407,6 +419,7 @@ static SIMPLE_DEV_PM_OPS(imx2_wdt_pm_ops, imx2_wdt_suspend,
>  
>  static const struct of_device_id imx2_wdt_dt_ids[] = {
>  	{ .compatible = "fsl,imx21-wdt", },
> +	{ .compatible = "fsl,imx7d-wdt", },
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, imx2_wdt_dt_ids);
> -- 
> 2.35.1
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

WARNING: multiple messages have this Message-ID (diff)
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Alistair Francis <alistair@alistair23.me>
Cc: shawnguo@kernel.org, linux@roeck-us.net,
	linux-watchdog@vger.kernel.org, wim@linux-watchdog.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	kernel@pengutronix.de, linux-imx@nxp.com, festevam@gmail.com,
	robh+dt@kernel.org
Subject: Re: [PATCH v4] watchdog: imx2_wdg: Allow ping on suspend
Date: Mon, 28 Mar 2022 10:01:11 +0200	[thread overview]
Message-ID: <20220328080111.GD12181@pengutronix.de> (raw)
In-Reply-To: <20220323115752.360409-1-alistair@alistair23.me>

Hi,

On Wed, Mar 23, 2022 at 09:57:52PM +1000, Alistair Francis wrote:
> The i.MX watchdog cannot be disabled by software once it has been
> enabled. This means that it can't be stopped before suspend.
> 
> For systems that enter low power mode this is fine, as the watchdog will
> be automatically stopped by hardware in low power mode. Not all i.MX
> platforms support low power mode in the mainline kernel. For example the
> i.MX7D does not enter low power mode and so will be rebooted 2 minutes
> after entering sleep states.
> 
> This patch introduces a device tree property "fsl,ping-during-suspend"
> that can be used to enable ping on suspend support for these systems.

This doesn't match the code anymore.

Sascha

> 
> Signed-off-by: Alistair Francis <alistair@alistair23.me>
> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
>  drivers/watchdog/imx2_wdt.c | 27 ++++++++++++++++++++-------
>  1 file changed, 20 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
> index 51bfb796898b..d0c5d47ddede 100644
> --- a/drivers/watchdog/imx2_wdt.c
> +++ b/drivers/watchdog/imx2_wdt.c
> @@ -66,6 +66,7 @@ struct imx2_wdt_device {
>  	struct watchdog_device wdog;
>  	bool ext_reset;
>  	bool clk_is_on;
> +	bool no_ping;
>  };
>  
>  static bool nowayout = WATCHDOG_NOWAYOUT;
> @@ -312,12 +313,18 @@ static int __init imx2_wdt_probe(struct platform_device *pdev)
>  
>  	wdev->ext_reset = of_property_read_bool(dev->of_node,
>  						"fsl,ext-reset-output");
> +	/*
> +	 * The i.MX7D doesn't support low power mode, so we need to ping the watchdog
> +	 * during suspend.
> +	 */
> +	wdev->no_ping = !of_device_is_compatible(dev->of_node, "fsl,imx7d-wdt");
>  	platform_set_drvdata(pdev, wdog);
>  	watchdog_set_drvdata(wdog, wdev);
>  	watchdog_set_nowayout(wdog, nowayout);
>  	watchdog_set_restart_priority(wdog, 128);
>  	watchdog_init_timeout(wdog, timeout, dev);
> -	watchdog_stop_ping_on_suspend(wdog);
> +	if (wdev->no_ping)
> +		watchdog_stop_ping_on_suspend(wdog);
>  
>  	if (imx2_wdt_is_running(wdev)) {
>  		imx2_wdt_set_timeout(wdog, wdog->timeout);
> @@ -366,9 +373,11 @@ static int __maybe_unused imx2_wdt_suspend(struct device *dev)
>  		imx2_wdt_ping(wdog);
>  	}
>  
> -	clk_disable_unprepare(wdev->clk);
> +	if (wdev->no_ping) {
> +		clk_disable_unprepare(wdev->clk);
>  
> -	wdev->clk_is_on = false;
> +		wdev->clk_is_on = false;
> +	}
>  
>  	return 0;
>  }
> @@ -380,11 +389,14 @@ static int __maybe_unused imx2_wdt_resume(struct device *dev)
>  	struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
>  	int ret;
>  
> -	ret = clk_prepare_enable(wdev->clk);
> -	if (ret)
> -		return ret;
> +	if (wdev->no_ping) {
> +		ret = clk_prepare_enable(wdev->clk);
>  
> -	wdev->clk_is_on = true;
> +		if (ret)
> +			return ret;
> +
> +		wdev->clk_is_on = true;
> +	}
>  
>  	if (watchdog_active(wdog) && !imx2_wdt_is_running(wdev)) {
>  		/*
> @@ -407,6 +419,7 @@ static SIMPLE_DEV_PM_OPS(imx2_wdt_pm_ops, imx2_wdt_suspend,
>  
>  static const struct of_device_id imx2_wdt_dt_ids[] = {
>  	{ .compatible = "fsl,imx21-wdt", },
> +	{ .compatible = "fsl,imx7d-wdt", },
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, imx2_wdt_dt_ids);
> -- 
> 2.35.1
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-03-28  8:01 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-23 11:57 [PATCH v4] watchdog: imx2_wdg: Allow ping on suspend Alistair Francis
2022-03-23 11:57 ` Alistair Francis
2022-03-23 13:07 ` Guenter Roeck
2022-03-23 13:07   ` Guenter Roeck
2022-03-23 21:08   ` Alistair
2022-03-23 21:08     ` Alistair
2022-03-28  8:01 ` Sascha Hauer [this message]
2022-03-28  8:01   ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220328080111.GD12181@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=alistair@alistair23.me \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.