All of lore.kernel.org
 help / color / mirror / Atom feed
From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de, zhangqing@rock-chips.com
Cc: robh+dt@kernel.org, krzk+dt@kernel.org, mturquette@baylibre.com,
	sboyd@kernel.org, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/2] dt-bindings: clock: convert rockchip,rk3288-cru.txt to YAML
Date: Tue, 29 Mar 2022 13:36:56 +0200	[thread overview]
Message-ID: <20220329113657.4567-1-jbx6244@gmail.com> (raw)

Current dts files with RK3288 'cru' nodes are manually verified.
In order to automate this process rockchip,rk3288-cru.txt has to be
converted to YAML.

Changed:
  Add properties to fix notifications by clocks.yaml for example:
    clocks
    clock-names

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---

Changed V2:
  add Rockchip maintainer on her request
  fix yamllint line too long
  restyle
---
 .../bindings/clock/rockchip,rk3288-cru.txt    | 67 ---------------
 .../bindings/clock/rockchip,rk3288-cru.yaml   | 85 +++++++++++++++++++
 2 files changed, 85 insertions(+), 67 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
 create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml

diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
deleted file mode 100644
index bf3a9ec19..000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-* Rockchip RK3288 Clock and Reset Unit
-
-The RK3288 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-A revision of this SoC is available: rk3288w. The clock tree is a bit
-different so another dt-compatible is available. Noticed that it is only
-setting the difference but there is no automatic revision detection. This
-should be performed by bootloaders.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3288-cru" or "rockchip,rk3288w-cru" in
-  case of this revision of Rockchip rk3288.
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "ext_i2s" - external I2S clock - optional,
- - "ext_hsadc" - external HSADC clock - optional,
- - "ext_edp_24m" - external display port clock - optional,
- - "ext_vip" - external VIP clock - optional,
- - "ext_isp" - external ISP clock - optional,
- - "ext_jtag" - external JTAG clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3188-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10124000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10124000 0x400>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml
new file mode 100644
index 000000000..96bc05749
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3288-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3288 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3288 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+
+  A revision of this SoC is available: rk3288w. The clock tree is a bit
+  different so another dt-compatible is available. Noticed that it is only
+  setting the difference but there is no automatic revision detection. This
+  should be performed by boot loaders.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"      - crystal input               - required,
+    - "xin32k"      - rtc clock                   - optional,
+    - "ext_i2s"     - external I2S clock          - optional,
+    - "ext_hsadc"   - external HSADC clock        - optional,
+    - "ext_edp_24m" - external display port clock - optional,
+    - "ext_vip"     - external VIP clock          - optional,
+    - "ext_isp"     - external ISP clock          - optional,
+    - "ext_jtag"    - external JTAG clock         - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3288-cru
+      - rockchip,rk3288w-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff760000 {
+      compatible = "rockchip,rk3288-cru";
+      reg = <0xff760000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
-- 
2.20.1


WARNING: multiple messages have this Message-ID
From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de, zhangqing@rock-chips.com
Cc: robh+dt@kernel.org, krzk+dt@kernel.org, mturquette@baylibre.com,
	sboyd@kernel.org, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/2] dt-bindings: clock: convert rockchip, rk3288-cru.txt to YAML
Date: Tue, 29 Mar 2022 13:36:56 +0200	[thread overview]
Message-ID: <20220329113657.4567-1-jbx6244@gmail.com> (raw)

Current dts files with RK3288 'cru' nodes are manually verified.
In order to automate this process rockchip,rk3288-cru.txt has to be
converted to YAML.

Changed:
  Add properties to fix notifications by clocks.yaml for example:
    clocks
    clock-names

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---

Changed V2:
  add Rockchip maintainer on her request
  fix yamllint line too long
  restyle
---
 .../bindings/clock/rockchip,rk3288-cru.txt    | 67 ---------------
 .../bindings/clock/rockchip,rk3288-cru.yaml   | 85 +++++++++++++++++++
 2 files changed, 85 insertions(+), 67 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
 create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml

diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
deleted file mode 100644
index bf3a9ec19..000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-* Rockchip RK3288 Clock and Reset Unit
-
-The RK3288 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-A revision of this SoC is available: rk3288w. The clock tree is a bit
-different so another dt-compatible is available. Noticed that it is only
-setting the difference but there is no automatic revision detection. This
-should be performed by bootloaders.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3288-cru" or "rockchip,rk3288w-cru" in
-  case of this revision of Rockchip rk3288.
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "ext_i2s" - external I2S clock - optional,
- - "ext_hsadc" - external HSADC clock - optional,
- - "ext_edp_24m" - external display port clock - optional,
- - "ext_vip" - external VIP clock - optional,
- - "ext_isp" - external ISP clock - optional,
- - "ext_jtag" - external JTAG clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3188-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10124000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10124000 0x400>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml
new file mode 100644
index 000000000..96bc05749
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3288-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3288 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3288 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+
+  A revision of this SoC is available: rk3288w. The clock tree is a bit
+  different so another dt-compatible is available. Noticed that it is only
+  setting the difference but there is no automatic revision detection. This
+  should be performed by boot loaders.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"      - crystal input               - required,
+    - "xin32k"      - rtc clock                   - optional,
+    - "ext_i2s"     - external I2S clock          - optional,
+    - "ext_hsadc"   - external HSADC clock        - optional,
+    - "ext_edp_24m" - external display port clock - optional,
+    - "ext_vip"     - external VIP clock          - optional,
+    - "ext_isp"     - external ISP clock          - optional,
+    - "ext_jtag"    - external JTAG clock         - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3288-cru
+      - rockchip,rk3288w-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff760000 {
+      compatible = "rockchip,rk3288-cru";
+      reg = <0xff760000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
-- 
2.20.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

WARNING: multiple messages have this Message-ID
From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de, zhangqing@rock-chips.com
Cc: robh+dt@kernel.org, krzk+dt@kernel.org, mturquette@baylibre.com,
	sboyd@kernel.org, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/2] dt-bindings: clock: convert rockchip, rk3288-cru.txt to YAML
Date: Tue, 29 Mar 2022 13:36:56 +0200	[thread overview]
Message-ID: <20220329113657.4567-1-jbx6244@gmail.com> (raw)

Current dts files with RK3288 'cru' nodes are manually verified.
In order to automate this process rockchip,rk3288-cru.txt has to be
converted to YAML.

Changed:
  Add properties to fix notifications by clocks.yaml for example:
    clocks
    clock-names

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---

Changed V2:
  add Rockchip maintainer on her request
  fix yamllint line too long
  restyle
---
 .../bindings/clock/rockchip,rk3288-cru.txt    | 67 ---------------
 .../bindings/clock/rockchip,rk3288-cru.yaml   | 85 +++++++++++++++++++
 2 files changed, 85 insertions(+), 67 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
 create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml

diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
deleted file mode 100644
index bf3a9ec19..000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-* Rockchip RK3288 Clock and Reset Unit
-
-The RK3288 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-A revision of this SoC is available: rk3288w. The clock tree is a bit
-different so another dt-compatible is available. Noticed that it is only
-setting the difference but there is no automatic revision detection. This
-should be performed by bootloaders.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3288-cru" or "rockchip,rk3288w-cru" in
-  case of this revision of Rockchip rk3288.
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "ext_i2s" - external I2S clock - optional,
- - "ext_hsadc" - external HSADC clock - optional,
- - "ext_edp_24m" - external display port clock - optional,
- - "ext_vip" - external VIP clock - optional,
- - "ext_isp" - external ISP clock - optional,
- - "ext_jtag" - external JTAG clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3188-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10124000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10124000 0x400>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml
new file mode 100644
index 000000000..96bc05749
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3288-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3288 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3288 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+
+  A revision of this SoC is available: rk3288w. The clock tree is a bit
+  different so another dt-compatible is available. Noticed that it is only
+  setting the difference but there is no automatic revision detection. This
+  should be performed by boot loaders.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"      - crystal input               - required,
+    - "xin32k"      - rtc clock                   - optional,
+    - "ext_i2s"     - external I2S clock          - optional,
+    - "ext_hsadc"   - external HSADC clock        - optional,
+    - "ext_edp_24m" - external display port clock - optional,
+    - "ext_vip"     - external VIP clock          - optional,
+    - "ext_isp"     - external ISP clock          - optional,
+    - "ext_jtag"    - external JTAG clock         - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3288-cru
+      - rockchip,rk3288w-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff760000 {
+      compatible = "rockchip,rk3288-cru";
+      reg = <0xff760000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2022-03-29 11:37 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-29 11:36 Johan Jonker [this message]
2022-03-29 11:36 ` [PATCH v2 1/2] dt-bindings: clock: convert rockchip, rk3288-cru.txt to YAML Johan Jonker
2022-03-29 11:36 ` Johan Jonker
2022-03-29 11:36 ` [PATCH v2 2/2] ARM: dts: rockchip: add clocks property to cru node rk3288 Johan Jonker
2022-03-29 11:36   ` Johan Jonker
2022-03-29 11:36   ` Johan Jonker
2022-03-29 11:42 ` [PATCH v2 1/2] dt-bindings: clock: convert rockchip, rk3288-cru.txt to YAML Krzysztof Kozlowski
2022-03-29 11:42   ` Krzysztof Kozlowski
2022-03-29 11:42   ` Krzysztof Kozlowski
2022-03-31 22:54 ` [PATCH v2 1/2] dt-bindings: clock: convert rockchip,rk3288-cru.txt " Stephen Boyd
2022-03-31 22:54   ` [PATCH v2 1/2] dt-bindings: clock: convert rockchip, rk3288-cru.txt " Stephen Boyd
2022-03-31 22:54   ` Stephen Boyd
2022-05-17 19:11 ` [PATCH v2 1/2] dt-bindings: clock: convert rockchip,rk3288-cru.txt " Heiko Stuebner
2022-05-17 19:11   ` [PATCH v2 1/2] dt-bindings: clock: convert rockchip, rk3288-cru.txt " Heiko Stuebner
2022-05-17 19:11   ` Heiko Stuebner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220329113657.4567-1-jbx6244@gmail.com \
    --to=jbx6244@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=zhangqing@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.