[PATCH RFC net-next 3/3] net: phy: mscc-miim: add support to set MDIO bus frequency

[Michael Walle <michael@walle.cc>]

Until now, the MDIO bus will have the hardware default bus frequency.
Read the desired frequency of the bus from the device tree and configure
it.

Signed-off-by: Michael Walle <michael@walle.cc>
---
 drivers/net/mdio/mdio-mscc-miim.c | 52 +++++++++++++++++++++++++++++--
 1 file changed, 50 insertions(+), 2 deletions(-)

diff --git a/drivers/net/mdio/mdio-mscc-miim.c b/drivers/net/mdio/mdio-mscc-miim.c
index c9efcfa2a1ce..3793c154bd0d 100644
--- a/drivers/net/mdio/mdio-mscc-miim.c
+++ b/drivers/net/mdio/mdio-mscc-miim.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/bitops.h>
+#include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
 #include <linux/kernel.h>
@@ -30,6 +31,8 @@
 #define		MSCC_MIIM_CMD_VLD		BIT(31)
 #define MSCC_MIIM_REG_DATA		0xC
 #define		MSCC_MIIM_DATA_ERROR		(BIT(16) | BIT(17))
+#define MSCC_MIIM_REG_CFG		0x10
+#define		MSCC_MIIM_CFG_PRESCALE_MASK	GENMASK(7, 0)
 
 #define MSCC_PHY_REG_PHY_CFG	0x0
 #define		PHY_CFG_PHY_ENA		(BIT(0) | BIT(1) | BIT(2) | BIT(3))
@@ -50,6 +53,8 @@ struct mscc_miim_dev {
 	int mii_status_offset;
 	struct regmap *phy_regs;
 	const struct mscc_miim_info *info;
+	struct clk *clk;
+	u32 clk_freq;
 };
 
 /* When high resolution timers aren't built-in: we can't use usleep_range() as
@@ -242,9 +247,32 @@ int mscc_miim_setup(struct device *dev, struct mii_bus **pbus, const char *name,
 }
 EXPORT_SYMBOL(mscc_miim_setup);
 
+static int mscc_miim_clk_set(struct mii_bus *bus)
+{
+	struct mscc_miim_dev *miim = bus->priv;
+	unsigned long rate;
+	u32 div;
+
+	/* Keep the current settings */
+	if (!miim->clk || !miim->clk_freq)
+		return 0;
+
+	rate = clk_get_rate(miim->clk);
+
+	div = DIV_ROUND_UP(rate, 2 * miim->clk_freq) - 1;
+	if (div == 0 || div & ~MSCC_MIIM_CFG_PRESCALE_MASK) {
+		dev_err(&bus->dev, "Incorrect MDIO clock frequency\n");
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(miim->regs, MSCC_MIIM_REG_CFG,
+				  MSCC_MIIM_CFG_PRESCALE_MASK, div);
+}
+
 static int mscc_miim_probe(struct platform_device *pdev)
 {
 	struct regmap *mii_regmap, *phy_regmap = NULL;
+	struct device_node *np = pdev->dev.of_node;
 	void __iomem *regs, *phy_regs;
 	struct mscc_miim_dev *miim;
 	struct resource *res;
@@ -295,21 +323,41 @@ static int mscc_miim_probe(struct platform_device *pdev)
 	if (!miim->info)
 		return -EINVAL;
 
-	ret = of_mdiobus_register(bus, pdev->dev.of_node);
+	miim->clk = devm_clk_get_optional(&pdev->dev, NULL);
+	if (IS_ERR(miim->clk))
+		return PTR_ERR(miim->clk);
+
+	ret = clk_prepare_enable(miim->clk);
+	if (ret)
+		return ret;
+
+	of_property_read_u32(np, "clock-frequency", &miim->clk_freq);
+
+	ret = mscc_miim_clk_set(bus);
+	if (ret)
+		goto out_disable_clk;
+
+	ret = of_mdiobus_register(bus, np);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Cannot register MDIO bus (%d)\n", ret);
-		return ret;
+		goto out_disable_clk;
 	}
 
 	platform_set_drvdata(pdev, bus);
 
 	return 0;
+
+out_disable_clk:
+	clk_disable_unprepare(miim->clk);
+	return ret;
 }
 
 static int mscc_miim_remove(struct platform_device *pdev)
 {
 	struct mii_bus *bus = platform_get_drvdata(pdev);
+	struct mscc_miim_dev *miim = bus->priv;
 
+	clk_disable_unprepare(miim->clk);
 	mdiobus_unregister(bus);
 
 	return 0;
-- 
2.30.2