From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id DD930C4332F for ; Thu, 31 Mar 2022 15:54:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239406AbiCaP4X (ORCPT ); Thu, 31 Mar 2022 11:56:23 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:36332 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239382AbiCaP4X (ORCPT ); Thu, 31 Mar 2022 11:56:23 -0400 Received: from mail-ej1-x62c.google.com (mail-ej1-x62c.google.com [IPv6:2a00:1450:4864:20::62c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 22A9C8B6E5 for ; Thu, 31 Mar 2022 08:54:35 -0700 (PDT) Received: by mail-ej1-x62c.google.com with SMTP id bh17so221729ejb.8 for ; Thu, 31 Mar 2022 08:54:35 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=+0kj1VHuVCuTwIUYn8MksZLIxUzbITlQbSkk6fjy+L8=; b=BI0/elhBlkqq1bXeh98Jmnkak4uRmVNbtBS92xsTZIFEgQeNnvVW/gAU/YtygYOuGG LRmWiqTqhjNb63sA4Q3pXrOuGQFXIpJgZ+BqSV6zQP2gQW8l/kw+5jjmQyj+ZH8wl6gP E4bD8MG+cEKcM7RfnqKOlhvGbNPm5/gemMG5kL7scc9uWrxqaZchZjWgP85bH9wlORVg 5WD0xP23siv/bqF4dqgZzeM4JrhlKgv9KnP9i7+KRhfkj8/JKWSJ9twwyPpDaM3QikLs rRCubL85cVCZ3U2MSl1yryN4IMAxjmSv2O9AM3VVhXm4wumRQ71Wo/k42Cy4uX5Wpnqt vryw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=+0kj1VHuVCuTwIUYn8MksZLIxUzbITlQbSkk6fjy+L8=; b=gQ8KkJ9TsjXmMfcwb6S+hXnfdyc7sgvXLX0t2G4uiX8b0DSfDGNv9iMnLyionL/tnU uAJXjZDXX6Vna7dfeyxVmQip7LlJScdirC9pzLMx3hm0ICVV9vazaUka1yXMgC2bvjar 1fkvLT6NetRgVI/JNd44Ux/84RUwIuBCZG7d6dwE33wI4cjEun8KAT7mv6sHkzjwI9RW uO8ViAmIPFvldBFAxYKt6NPVJeE8xvUnLK/neV1wrRutWGHjy/vI008kk+nDHf5hQZgp tVf0GPbTPxk/nXOmbWJMcmwxzG448svAc727/le30UrBPjCDf68TRSRzRyNxelhpp+sA LYoA== X-Gm-Message-State: AOAM530GFkCOyf3TJOQ4LqfokRvgnRt6SrgE2s4MmavvNIEvy2mCReRP pfCI96PD4Vu8pVcJlTXLOL2w/Q== X-Google-Smtp-Source: ABdhPJzbxxi0je/17ReZeqypHNjqLc2e1+penHcUTMbi3GgRqWcyE7J/sUJKHoETqHY+ohqEaTBKEA== X-Received: by 2002:a17:907:a0c8:b0:6df:ef3c:5eb6 with SMTP id hw8-20020a170907a0c800b006dfef3c5eb6mr5689683ejc.646.1648742073481; Thu, 31 Mar 2022 08:54:33 -0700 (PDT) Received: from localhost.localdomain (xdsl-188-155-201-27.adslplus.ch. [188.155.201.27]) by smtp.gmail.com with ESMTPSA id g10-20020a056402090a00b004196250baeasm11584077edz.95.2022.03.31.08.54.32 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 31 Mar 2022 08:54:33 -0700 (PDT) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Mark Brown , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org Cc: Kuldeep Singh , Krzysztof Kozlowski Subject: [PATCH v2 4/4] spi: dt-bindings: qcom,spi-qup: convert to dtschema Date: Thu, 31 Mar 2022 17:54:25 +0200 Message-Id: <20220331155425.714946-4-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20220331155320.714754-1-krzysztof.kozlowski@linaro.org> References: <20220331155320.714754-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Convert the Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI) bindings to DT Schema. Signed-off-by: Krzysztof Kozlowski --- .../bindings/soc/qcom/qcom,gsbi.txt | 2 +- .../devicetree/bindings/spi/qcom,spi-qup.txt | 103 ------------------ .../devicetree/bindings/spi/qcom,spi-qup.yaml | 81 ++++++++++++++ 3 files changed, 82 insertions(+), 104 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qup.txt create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt index fe1855f09dcc..c443f1416a0a 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt @@ -33,7 +33,7 @@ controller, or some combination of aforementioned devices. See the following for child node definitions: Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt -Documentation/devicetree/bindings/spi/qcom,spi-qup.txt +Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt Example for APQ8064: diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt deleted file mode 100644 index 5c090771c016..000000000000 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt +++ /dev/null @@ -1,103 +0,0 @@ -Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI) - -The QUP core is an AHB slave that provides a common data path (an output FIFO -and an input FIFO) for serial peripheral interface (SPI) mini-core. - -SPI in master mode supports up to 50MHz, up to four chip selects, programmable -data path from 4 bits to 32 bits and numerous protocol variants. - -Required properties: -- compatible: Should contain: - "qcom,spi-qup-v1.1.1" for 8660, 8960 and 8064. - "qcom,spi-qup-v2.1.1" for 8974 and later - "qcom,spi-qup-v2.2.1" for 8974 v2 and later. - -- reg: Should contain base register location and length -- interrupts: Interrupt number used by this controller - -- clocks: Should contain the core clock and the AHB clock. -- clock-names: Should be "core" for the core clock and "iface" for the - AHB clock. - -- #address-cells: Number of cells required to define a chip select - address on the SPI bus. Should be set to 1. -- #size-cells: Should be zero. - -Optional properties: -- spi-max-frequency: Specifies maximum SPI clock frequency, - Units - Hz. Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt -- num-cs: total number of chipselects -- cs-gpios: should specify GPIOs used for chipselects. - The gpios will be referred to as reg = in the SPI child - nodes. If unspecified, a single SPI device without a chip - select can be used. - -- dmas: Two DMA channel specifiers following the convention outlined - in bindings/dma/dma.txt -- dma-names: Names for the dma channels, if present. There must be at - least one channel named "tx" for transmit and named "rx" for - receive. - -SPI slave nodes must be children of the SPI master node and can contain -properties described in Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: - - spi_8: spi@f9964000 { /* BLSP2 QUP2 */ - - compatible = "qcom,spi-qup-v2"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xf9964000 0x1000>; - interrupts = <0 102 0>; - spi-max-frequency = <19200000>; - - clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - - dmas = <&blsp1_bam 13>, <&blsp1_bam 12>; - dma-names = "rx", "tx"; - - pinctrl-names = "default"; - pinctrl-0 = <&spi8_default>; - - device@0 { - compatible = "arm,pl022-dummy"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <19200000>; - spi-cpol; - }; - - device@1 { - compatible = "arm,pl022-dummy"; - #address-cells = <1>; - #size-cells = <1>; - reg = <1>; /* Chip select 1 */ - spi-max-frequency = <9600000>; - spi-cpha; - }; - - device@2 { - compatible = "arm,pl022-dummy"; - #address-cells = <1>; - #size-cells = <1>; - reg = <2>; /* Chip select 2 */ - spi-max-frequency = <19200000>; - spi-cpol; - spi-cpha; - }; - - device@3 { - compatible = "arm,pl022-dummy"; - #address-cells = <1>; - #size-cells = <1>; - reg = <3>; /* Chip select 3 */ - spi-max-frequency = <19200000>; - spi-cpol; - spi-cpha; - spi-cs-high; - }; - }; diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml new file mode 100644 index 000000000000..93f14dd01afc --- /dev/null +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/qcom,spi-qup.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI) + +maintainers: + - Andy Gross + - Bjorn Andersson + - Krzysztof Kozlowski + +description: + The QUP core is an AHB slave that provides a common data path (an output FIFO + and an input FIFO) for serial peripheral interface (SPI) mini-core. + + SPI in master mode supports up to 50MHz, up to four chip selects, + programmable data path from 4 bits to 32 bits and numerous protocol variants. + +allOf: + - $ref: /schemas/spi/spi-controller.yaml# + +properties: + compatible: + enum: + - qcom,spi-qup-v1.1.1 # for 8660, 8960 and 8064 + - qcom,spi-qup-v2.1.1 # for 8974 and later + - qcom,spi-qup-v2.2.1 # for 8974 v2 and later + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: iface + + dmas: + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - interrupts + - reg + +unevaluatedProperties: false + +examples: + - | + #include + #include + + spi@7575000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x07575000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_spi1_default>; + pinctrl-1 = <&blsp1_spi1_sleep>; + dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + }; -- 2.32.0