All of lore.kernel.org
 help / color / mirror / Atom feed
From: Felix Matouschek <felix@matouschek.org>
To: linux-mtd@lists.infradead.org
Subject: [PATCH] mtd: spinand: Add support for XTX XT26G0xA
Date: Fri,  1 Apr 2022 23:29:51 +0200	[thread overview]
Message-ID: <20220401212951.1133780-1-felix@matouschek.org> (raw)

Add support for XTX Technology XT26G01AXXXXX, XTX26G02AXXXXX and
XTX26G04AXXXXX SPI NAND.

These are 3V, 1G/2G/4Gbit serial SLC NAND flash devices with on-die ECC
(8bit strength per 512bytes).

Tested on Teltonika RUTX10 flashed with OpenWrt.

Datasheets available at
http://www.xtxtech.com/download/?AId=225
https://datasheet.lcsc.com/szlcsc/2005251034_XTX-XT26G01AWSEGA_C558841.pdf

Signed-off-by: Felix Matouschek <felix@matouschek.org>
---
 drivers/mtd/nand/spi/Makefile |   2 +-
 drivers/mtd/nand/spi/core.c   |   1 +
 drivers/mtd/nand/spi/xtx.c    | 122 ++++++++++++++++++++++++++++++++++
 include/linux/mtd/spinand.h   |   1 +
 4 files changed, 125 insertions(+), 1 deletion(-)
 create mode 100644 drivers/mtd/nand/spi/xtx.c

diff --git a/drivers/mtd/nand/spi/Makefile b/drivers/mtd/nand/spi/Makefile
index 9662b9c1d5a9..80dabe6ff0f3 100644
--- a/drivers/mtd/nand/spi/Makefile
+++ b/drivers/mtd/nand/spi/Makefile
@@ -1,3 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
-spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o
+spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o
 obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index ff8336870bc0..d5b685d1605e 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -933,6 +933,7 @@ static const struct spinand_manufacturer *spinand_manufacturers[] = {
 	&paragon_spinand_manufacturer,
 	&toshiba_spinand_manufacturer,
 	&winbond_spinand_manufacturer,
+	&xtx_spinand_manufacturer,
 };
 
 static int spinand_manufacturer_match(struct spinand_device *spinand,
diff --git a/drivers/mtd/nand/spi/xtx.c b/drivers/mtd/nand/spi/xtx.c
new file mode 100644
index 000000000000..95fe37790f87
--- /dev/null
+++ b/drivers/mtd/nand/spi/xtx.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Author:
+ * Felix Matouschek <felix@matouschek.org>
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/mtd/spinand.h>
+
+#define SPINAND_MFR_XTX	0x0B
+
+#define XT26G0XA_STATUS_ECC_MASK	GENMASK(5, 2)
+#define XT26G0XA_STATUS_ECC_NO_DETECTED	(0 << 2)
+#define XT26G0XA_STATUS_ECC_8_CORRECTED	(3 << 4)
+#define XT26G0XA_STATUS_ECC_UNCOR_ERROR	(2 << 4)
+
+static SPINAND_OP_VARIANTS(read_cache_variants,
+		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+
+static SPINAND_OP_VARIANTS(write_cache_variants,
+		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
+		SPINAND_PROG_LOAD(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_variants,
+		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
+		SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
+static int xt26g0xa_ooblayout_ecc(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *region)
+{
+	if (section)
+		return -ERANGE;
+
+	region->offset = 8;
+	region->length = 40;
+
+	return 0;
+}
+
+static int xt26g0xa_ooblayout_free(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *region)
+{
+	if (section)
+		return -ERANGE;
+
+	region->offset = 1;
+	region->length = 7;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops xt26g0xa_ooblayout = {
+	.ecc = xt26g0xa_ooblayout_ecc,
+	.free = xt26g0xa_ooblayout_free,
+};
+
+static int xt26g0xa_ecc_get_status(struct spinand_device *spinand,
+					 u8 status)
+{
+	switch (status & XT26G0XA_STATUS_ECC_MASK) {
+	case XT26G0XA_STATUS_ECC_NO_DETECTED:
+		return 0;
+	case XT26G0XA_STATUS_ECC_8_CORRECTED:
+		return 8;
+	case XT26G0XA_STATUS_ECC_UNCOR_ERROR:
+		return -EBADMSG;
+	default: /* (1 << 2) through (7 << 2) are 1-7 corrected errors */
+		return (status & XT26G0XA_STATUS_ECC_MASK) >> 2;
+	}
+
+	return -EINVAL;
+}
+
+static const struct spinand_info xtx_spinand_table[] = {
+	SPINAND_INFO("XT26G01A",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xE1),
+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&xt26g0xa_ooblayout,
+				     xt26g0xa_ecc_get_status)),
+	SPINAND_INFO("XT26G02A",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xE2),
+		     NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&xt26g0xa_ooblayout,
+				     xt26g0xa_ecc_get_status)),
+	SPINAND_INFO("XT26G04A",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xE3),
+		     NAND_MEMORG(1, 2048, 64, 128, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&xt26g0xa_ooblayout,
+				     xt26g0xa_ecc_get_status)),
+};
+
+static const struct spinand_manufacturer_ops xtx_spinand_manuf_ops = {
+};
+
+const struct spinand_manufacturer xtx_spinand_manufacturer = {
+	.id = SPINAND_MFR_XTX,
+	.name = "XTX",
+	.chips = xtx_spinand_table,
+	.nchips = ARRAY_SIZE(xtx_spinand_table),
+	.ops = &xtx_spinand_manuf_ops,
+};
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 3aa28240a77f..5584d3bb6556 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -266,6 +266,7 @@ extern const struct spinand_manufacturer micron_spinand_manufacturer;
 extern const struct spinand_manufacturer paragon_spinand_manufacturer;
 extern const struct spinand_manufacturer toshiba_spinand_manufacturer;
 extern const struct spinand_manufacturer winbond_spinand_manufacturer;
+extern const struct spinand_manufacturer xtx_spinand_manufacturer;
 
 /**
  * struct spinand_op_variants - SPI NAND operation variants
-- 
2.35.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

             reply	other threads:[~2022-04-01 21:38 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-01 21:29 Felix Matouschek [this message]
2022-04-04  8:41 ` [PATCH] mtd: spinand: Add support for XTX XT26G0xA Miquel Raynal
2022-04-06 16:16   ` Felix Matouschek
2022-04-07  7:09     ` Chuanhong Guo
2022-04-07  7:50       ` Miquel Raynal
2022-04-08 16:22       ` Felix Matouschek
  -- strict thread matches above, loose matches on Subject: below --
2021-07-02 19:52 Felix Matouschek
2021-12-22 11:27 ` Felix Matouschek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220401212951.1133780-1-felix@matouschek.org \
    --to=felix@matouschek.org \
    --cc=linux-mtd@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.