All of lore.kernel.org
 help / color / mirror / Atom feed
From: Johan Jonker <jbx6244@gmail.com>
To: kever.yang@rock-chips.com
Cc: sjg@chromium.org, philipp.tomsich@vrull.eu, lukma@denx.de,
	seanga2@gmail.com, u-boot@lists.denx.de
Subject: [PATCH v9 09/16] arm: dts: rockchip: add rk3066a-mk808.dts
Date: Mon,  4 Apr 2022 16:19:19 +0200	[thread overview]
Message-ID: <20220404141926.6085-10-jbx6244@gmail.com> (raw)
In-Reply-To: <20220404141926.6085-1-jbx6244@gmail.com>

MK808 is a RK3066-based board with 1 USB host and 1 USB OTG port,
HDMI and a micro-SD card slot. It also includes on-board NAND
and 1GB of SDRAM. Add rk3066a-mk808.dts. Move U-boot specific
things in a rk3066a-mk808-u-boot.dtsi file.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---

Changed V9:
  add led config
  move dtb-$() in Makefile

Changed V8:
  update dts
---
 arch/arm/dts/Makefile                  |   3 +
 arch/arm/dts/rk3066a-mk808-u-boot.dtsi |  48 ++++++
 arch/arm/dts/rk3066a-mk808.dts         | 216 +++++++++++++++++++++++++
 3 files changed, 267 insertions(+)
 create mode 100644 arch/arm/dts/rk3066a-mk808-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3066a-mk808.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 99dc7bc777..e8657bed09 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -90,6 +90,9 @@ dtb-$(CONFIG_ROCKCHIP_PX30) += \
 dtb-$(CONFIG_ROCKCHIP_RK3036) += \
 	rk3036-sdk.dtb
 
+dtb-$(CONFIG_ROCKCHIP_RK3066) += \
+	rk3066a-mk808.dtb
+
 dtb-$(CONFIG_ROCKCHIP_RK3128) += \
 	rk3128-evb.dtb
 
diff --git a/arch/arm/dts/rk3066a-mk808-u-boot.dtsi b/arch/arm/dts/rk3066a-mk808-u-boot.dtsi
new file mode 100644
index 0000000000..3ea5fd9511
--- /dev/null
+++ b/arch/arm/dts/rk3066a-mk808-u-boot.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include "rk3066a-u-boot.dtsi"
+
+/ {
+	config {
+		u-boot,boot-led = "mk808:blue:power";
+	};
+};
+
+&cru {
+	u-boot,dm-pre-reloc;
+};
+
+&dmc {
+	compatible = "rockchip,rk3066-dmc", "syscon";
+	rockchip,pctl-timing = <0x12c 0xc8 0x1f4 0x1e 0x4e 0x4 0x69 0x6
+				0x3 0x0 0x6 0x5 0xc 0x10 0x6 0x4
+				0x4 0x5 0x4 0x200 0x3 0xa 0x40 0x0
+				0x1 0x5 0x5 0x3 0xc 0x1e 0x100 0x0
+				0x4 0x0>;
+	rockchip,phy-timing = <0x208c6690 0x690878 0x10022a00
+			       0x220 0x40 0x0 0x0>;
+	rockchip,sdram-params = <0x24716310 0 2 300000000 3 9 0>;
+};
+
+&mmc0 {
+	fifo-mode;
+	max-frequency = <4000000>;
+	u-boot,dm-spl;
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&noc {
+	compatible = "rockchip,rk3066-noc", "syscon";
+};
+
+&timer2 {
+	clock-frequency = <24000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/rk3066a-mk808.dts b/arch/arm/dts/rk3066a-mk808.dts
new file mode 100644
index 0000000000..667d57a4ff
--- /dev/null
+++ b/arch/arm/dts/rk3066a-mk808.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Paweł Jarosz <paweljarosz3691@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3066a.dtsi"
+
+/ {
+	model = "Rikomagic MK808";
+	compatible = "rikomagic,mk808", "rockchip,rk3066a";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@60000000 {
+		reg = <0x60000000 0x40000000>;
+		device_type = "memory";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <2500000>;
+		poll-interval = <100>;
+
+		recovery {
+			label = "recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		blue_led: led-0 {
+			label = "mk808:blue:power";
+			gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	hdmi_con {
+		compatible = "hdmi-connector";
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	vcc_2v5: vcc-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_2v5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_host: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&host_drv>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-name = "host-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_otg: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&otg_drv>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-name = "vcc_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&sdmmc_pwr>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_wifi: sdio-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&wifi_pwr>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_in_vop1 {
+	status = "disabled";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	non-removable;
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_wifi>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb-host {
+		host_drv: host-drv {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	usb-otg {
+		otg_drv: otg-drv {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	sdio {
+		wifi_pwr: wifi-pwr {
+			rockchip,pins = <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_2v5>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&vop0 {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
-- 
2.20.1


  parent reply	other threads:[~2022-04-04 14:24 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-04 14:19 [PATCH v9 00/16] Add Rikomagic MK808 board Johan Jonker
2022-04-04 14:19 ` [PATCH v9 01/16] rockchip: rk3066-power: sync power domain dt-binding header from Linux Johan Jonker
2022-04-06 15:01   ` Kever Yang
2022-04-04 14:19 ` [PATCH v9 02/16] rockchip: rk3066: add grf header file Johan Jonker
2022-04-09  3:49   ` Kever Yang
2022-04-04 14:19 ` [PATCH v9 03/16] rockchip: rk3066: add clock driver for rk3066 soc Johan Jonker
2022-04-09  3:49   ` Kever Yang
2022-04-04 14:19 ` [PATCH v9 04/16] rockchip: rk3066: add rk3066 pinctrl driver Johan Jonker
2022-04-09  3:49   ` Kever Yang
2022-04-04 14:19 ` [PATCH v9 05/16] rockchip: rk3066: add sdram driver Johan Jonker
2022-04-09  3:50   ` Kever Yang
2022-04-04 14:19 ` [PATCH v9 06/16] arm: dts: rockchip: fix rk3xxx-u-boot.dtsi Johan Jonker
2022-04-09  3:50   ` Kever Yang
2022-04-04 14:19 ` [PATCH v9 07/16] arm: dts: rockchip: fix include rk3xxx-u-boot.dtsi Johan Jonker
2022-04-09  3:50   ` Kever Yang
2022-04-04 14:19 ` [PATCH v9 08/16] arm: dts: rockchip: add rk3066a.dtsi Johan Jonker
2022-04-09  3:52   ` Kever Yang
2022-04-04 14:19 ` Johan Jonker [this message]
2022-04-09  3:52   ` [PATCH v9 09/16] arm: dts: rockchip: add rk3066a-mk808.dts Kever Yang
2022-04-04 14:19 ` [PATCH v9 10/16] rockchip: rk3066: add include Johan Jonker
2022-04-04 14:19 ` [PATCH v9 11/16] rockchip: rk3066: add rk3066_common.h include Johan Jonker
2022-04-04 14:19 ` [PATCH v9 12/16] rockchip: rk3066: add core support Johan Jonker
2022-04-09  3:55   ` Kever Yang
2022-04-04 14:19 ` [PATCH v9 13/16] rockchip: rk3066: add Rikomagic MK808 board Johan Jonker
2022-04-09  3:57   ` Kever Yang
2022-04-04 14:19 ` [PATCH v9 14/16] rockchip: rk3066: add mk808_defconfig Johan Jonker
2022-04-09  3:57   ` Kever Yang
2022-04-04 14:19 ` [PATCH v9 15/16] rockchip: tools: add rk3066 support to rkcommon.c Johan Jonker
2022-04-09  3:56   ` Kever Yang
2022-04-04 14:19 ` [PATCH v9 16/16] doc: rockchip: add rk3066 Rikomagic MK808 Johan Jonker
2022-04-09  4:00   ` Kever Yang
2022-04-10  9:08     ` Johan Jonker
2022-04-11 10:06       ` Kever Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220404141926.6085-10-jbx6244@gmail.com \
    --to=jbx6244@gmail.com \
    --cc=kever.yang@rock-chips.com \
    --cc=lukma@denx.de \
    --cc=philipp.tomsich@vrull.eu \
    --cc=seanga2@gmail.com \
    --cc=sjg@chromium.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.