All of lore.kernel.org
 help / color / mirror / Atom feed
From: Arnd Bergmann <arnd@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>,
	Russell King <linux@armlinux.org.uk>,
	Hartley Sweeten <hsweeten@visionengravers.com>,
	Alexander Sverdlin <alexander.sverdlin@gmail.com>,
	Hubert Feurstein <hubert.feurstein@contec.at>,
	Lukasz Majewski <lukma@denx.de>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Alim Akhtar <alim.akhtar@samsung.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Imre Kaloz <kaloz@openwrt.org>,
	Krzysztof Halasa <khalasa@piap.pl>, Andrew Lunn <andrew@lunn.ch>,
	Gregory Clement <gregory.clement@bootlin.com>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Simtec Linux Team <linux@simtec.co.uk>,
	Liviu Dudau <liviu.dudau@arm.com>,
	Sudeep Holla <sudeep.holla@arm.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Ard Biesheuvel <ardb@kernel.org>, Stephen Boyd <sboyd@kernel.org>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, patches@opensource.cirrus.com
Subject: [PATCH 03/12] ARM: ep93xx: enable SPARSE_IRQ
Date: Tue,  5 Apr 2022 11:17:41 +0200	[thread overview]
Message-ID: <20220405091750.3076973-4-arnd@kernel.org> (raw)
In-Reply-To: <20220405091750.3076973-1-arnd@kernel.org>

From: Arnd Bergmann <arnd@arndb.de>

Without CONFIG_SPARSE_IRQ, we rely on mach/irqs.h to define NR_IRQS
globally. Do the minimal conversion by setting .nr_irqs in each
machine descriptor.

Only the vision_ep9307 machine has extra IRQs for GPIOs, so make
.nr_irqs the original value there, while using the plain NR_EP93XX_IRQS
everywhere else.

Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Hubert Feurstein <hubert.feurstein@contec.at>
Cc: Lukasz Majewski <lukma@denx.de>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/Kconfig                               | 2 ++
 arch/arm/mach-ep93xx/adssphere.c               | 1 +
 arch/arm/mach-ep93xx/core.c                    | 1 +
 arch/arm/mach-ep93xx/edb93xx.c                 | 8 ++++++++
 arch/arm/mach-ep93xx/gesbc9312.c               | 1 +
 arch/arm/mach-ep93xx/{include/mach => }/irqs.h | 7 -------
 arch/arm/mach-ep93xx/micro9.c                  | 4 ++++
 arch/arm/mach-ep93xx/simone.c                  | 1 +
 arch/arm/mach-ep93xx/snappercl15.c             | 1 +
 arch/arm/mach-ep93xx/soc.h                     | 1 +
 arch/arm/mach-ep93xx/ts72xx.c                  | 3 ++-
 arch/arm/mach-ep93xx/vision_ep9307.c           | 1 +
 12 files changed, 23 insertions(+), 8 deletions(-)
 rename arch/arm/mach-ep93xx/{include/mach => }/irqs.h (96%)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 31f024e6e925..5177e54cc14c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -358,6 +358,8 @@ config ARCH_EP93XX
 	select CPU_ARM920T
 	select GPIOLIB
 	select COMMON_CLK
+	select IRQ_DOMAIN
+	select SPARSE_IRQ
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 8d5e349a7a6d..0c48d3c5b8e7 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -32,6 +32,7 @@ static void __init adssphere_init_machine(void)
 MACHINE_START(ADSSPHERE, "ADS Sphere board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index e4569a5acc3f..2d58e273c96d 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -47,6 +47,7 @@
 #include <asm/mach/map.h>
 
 #include "soc.h"
+#include "irqs.h"
 
 /*************************************************************************
  * Static I/O mappings that are needed for all EP93xx platforms
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index af0e22471ebd..4b90899a66e9 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -243,6 +243,7 @@ static void __init edb93xx_init_machine(void)
 MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -255,6 +256,7 @@ MACHINE_END
 MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
 	/* Maintainer: George Kashperko <george@chas.com.ua> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -267,6 +269,7 @@ MACHINE_END
 MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -279,6 +282,7 @@ MACHINE_END
 MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
 	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -291,6 +295,7 @@ MACHINE_END
 MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -303,6 +308,7 @@ MACHINE_END
 MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
 	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -315,6 +321,7 @@ MACHINE_END
 MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -327,6 +334,7 @@ MACHINE_END
 MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index d7f9890321eb..0b7043e3e178 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -32,6 +32,7 @@ static void __init gesbc9312_init_machine(void)
 MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/include/mach/irqs.h b/arch/arm/mach-ep93xx/irqs.h
similarity index 96%
rename from arch/arm/mach-ep93xx/include/mach/irqs.h
rename to arch/arm/mach-ep93xx/irqs.h
index 60c69c4ed7e1..353201b90c66 100644
--- a/arch/arm/mach-ep93xx/include/mach/irqs.h
+++ b/arch/arm/mach-ep93xx/irqs.h
@@ -1,8 +1,4 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ep93xx/include/mach/irqs.h
- */
-
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
 
@@ -77,7 +73,4 @@
 #define EP93XX_BOARD_IRQ(x)		(NR_EP93XX_IRQS + (x))
 #define EP93XX_BOARD_IRQS		32
 
-#define NR_IRQS				(NR_EP93XX_IRQS + EP93XX_BOARD_IRQS)
-
-
 #endif
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index e6ead8ded6ee..c121c459aa17 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -76,6 +76,7 @@ static void __init micro9_init_machine(void)
 MACHINE_START(MICRO9, "Contec Micro9-High")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -88,6 +89,7 @@ MACHINE_END
 MACHINE_START(MICRO9M, "Contec Micro9-Mid")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -100,6 +102,7 @@ MACHINE_END
 MACHINE_START(MICRO9L, "Contec Micro9-Lite")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -112,6 +115,7 @@ MACHINE_END
 MACHINE_START(MICRO9S, "Contec Micro9-Slim")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 5291053023b2..569e72413561 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -119,6 +119,7 @@ static void __init simone_init_machine(void)
 MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
 	/* Maintainer: Ryan Mallon */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index e200d69471e9..1dfb725671b1 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -153,6 +153,7 @@ static void __init snappercl15_init_machine(void)
 MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
 	/* Maintainer: Ryan Mallon */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h
index 94ef7f275f94..f0986e288d19 100644
--- a/arch/arm/mach-ep93xx/soc.h
+++ b/arch/arm/mach-ep93xx/soc.h
@@ -10,6 +10,7 @@
 #define _EP93XX_SOC_H
 
 #include <mach/ep93xx-regs.h>
+#include "irqs.h"
 
 /*
  * EP93xx Physical Memory Map:
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 12eff8c8074d..e70bac011407 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -22,7 +22,6 @@
 
 #include "gpio-ep93xx.h"
 #include "hardware.h"
-#include <mach/irqs.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -350,6 +349,7 @@ static void __init ts72xx_init_machine(void)
 MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ts72xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -413,6 +413,7 @@ static void __init bk3_init_machine(void)
 MACHINE_START(BK3, "Liebherr controller BK3.1")
 	/* Maintainer: Lukasz Majewski <lukma@denx.de> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ts72xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index e46281e60bf7..30d9cf3791eb 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -302,6 +302,7 @@ static void __init vision_init_machine(void)
 MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS + EP93XX_BOARD_IRQS,
 	.map_io		= vision_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
-- 
2.29.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID
From: Arnd Bergmann <arnd@kernel.org>
To: unlisted-recipients:; (no To-header on input)
Cc: Arnd Bergmann <arnd@arndb.de>,
	Russell King <linux@armlinux.org.uk>,
	Hartley Sweeten <hsweeten@visionengravers.com>,
	Alexander Sverdlin <alexander.sverdlin@gmail.com>,
	Hubert Feurstein <hubert.feurstein@contec.at>,
	Lukasz Majewski <lukma@denx.de>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Alim Akhtar <alim.akhtar@samsung.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Imre Kaloz <kaloz@openwrt.org>,
	Krzysztof Halasa <khalasa@piap.pl>, Andrew Lunn <andrew@lunn.ch>,
	Gregory Clement <gregory.clement@bootlin.com>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Simtec Linux Team <linux@simtec.co.uk>,
	Liviu Dudau <liviu.dudau@arm.com>,
	Sudeep Holla <sudeep.holla@arm.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Ard Biesheuvel <ardb@kernel.org>, Stephen Boyd <sboyd@kernel.org>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, patches@opensource.cirrus.com
Subject: [PATCH 03/12] ARM: ep93xx: enable SPARSE_IRQ
Date: Tue,  5 Apr 2022 11:17:41 +0200	[thread overview]
Message-ID: <20220405091750.3076973-4-arnd@kernel.org> (raw)
In-Reply-To: <20220405091750.3076973-1-arnd@kernel.org>

From: Arnd Bergmann <arnd@arndb.de>

Without CONFIG_SPARSE_IRQ, we rely on mach/irqs.h to define NR_IRQS
globally. Do the minimal conversion by setting .nr_irqs in each
machine descriptor.

Only the vision_ep9307 machine has extra IRQs for GPIOs, so make
.nr_irqs the original value there, while using the plain NR_EP93XX_IRQS
everywhere else.

Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Hubert Feurstein <hubert.feurstein@contec.at>
Cc: Lukasz Majewski <lukma@denx.de>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/Kconfig                               | 2 ++
 arch/arm/mach-ep93xx/adssphere.c               | 1 +
 arch/arm/mach-ep93xx/core.c                    | 1 +
 arch/arm/mach-ep93xx/edb93xx.c                 | 8 ++++++++
 arch/arm/mach-ep93xx/gesbc9312.c               | 1 +
 arch/arm/mach-ep93xx/{include/mach => }/irqs.h | 7 -------
 arch/arm/mach-ep93xx/micro9.c                  | 4 ++++
 arch/arm/mach-ep93xx/simone.c                  | 1 +
 arch/arm/mach-ep93xx/snappercl15.c             | 1 +
 arch/arm/mach-ep93xx/soc.h                     | 1 +
 arch/arm/mach-ep93xx/ts72xx.c                  | 3 ++-
 arch/arm/mach-ep93xx/vision_ep9307.c           | 1 +
 12 files changed, 23 insertions(+), 8 deletions(-)
 rename arch/arm/mach-ep93xx/{include/mach => }/irqs.h (96%)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 31f024e6e925..5177e54cc14c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -358,6 +358,8 @@ config ARCH_EP93XX
 	select CPU_ARM920T
 	select GPIOLIB
 	select COMMON_CLK
+	select IRQ_DOMAIN
+	select SPARSE_IRQ
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 8d5e349a7a6d..0c48d3c5b8e7 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -32,6 +32,7 @@ static void __init adssphere_init_machine(void)
 MACHINE_START(ADSSPHERE, "ADS Sphere board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index e4569a5acc3f..2d58e273c96d 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -47,6 +47,7 @@
 #include <asm/mach/map.h>
 
 #include "soc.h"
+#include "irqs.h"
 
 /*************************************************************************
  * Static I/O mappings that are needed for all EP93xx platforms
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index af0e22471ebd..4b90899a66e9 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -243,6 +243,7 @@ static void __init edb93xx_init_machine(void)
 MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -255,6 +256,7 @@ MACHINE_END
 MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
 	/* Maintainer: George Kashperko <george@chas.com.ua> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -267,6 +269,7 @@ MACHINE_END
 MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -279,6 +282,7 @@ MACHINE_END
 MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
 	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -291,6 +295,7 @@ MACHINE_END
 MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -303,6 +308,7 @@ MACHINE_END
 MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
 	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -315,6 +321,7 @@ MACHINE_END
 MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -327,6 +334,7 @@ MACHINE_END
 MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index d7f9890321eb..0b7043e3e178 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -32,6 +32,7 @@ static void __init gesbc9312_init_machine(void)
 MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/include/mach/irqs.h b/arch/arm/mach-ep93xx/irqs.h
similarity index 96%
rename from arch/arm/mach-ep93xx/include/mach/irqs.h
rename to arch/arm/mach-ep93xx/irqs.h
index 60c69c4ed7e1..353201b90c66 100644
--- a/arch/arm/mach-ep93xx/include/mach/irqs.h
+++ b/arch/arm/mach-ep93xx/irqs.h
@@ -1,8 +1,4 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ep93xx/include/mach/irqs.h
- */
-
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
 
@@ -77,7 +73,4 @@
 #define EP93XX_BOARD_IRQ(x)		(NR_EP93XX_IRQS + (x))
 #define EP93XX_BOARD_IRQS		32
 
-#define NR_IRQS				(NR_EP93XX_IRQS + EP93XX_BOARD_IRQS)
-
-
 #endif
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index e6ead8ded6ee..c121c459aa17 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -76,6 +76,7 @@ static void __init micro9_init_machine(void)
 MACHINE_START(MICRO9, "Contec Micro9-High")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -88,6 +89,7 @@ MACHINE_END
 MACHINE_START(MICRO9M, "Contec Micro9-Mid")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -100,6 +102,7 @@ MACHINE_END
 MACHINE_START(MICRO9L, "Contec Micro9-Lite")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -112,6 +115,7 @@ MACHINE_END
 MACHINE_START(MICRO9S, "Contec Micro9-Slim")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 5291053023b2..569e72413561 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -119,6 +119,7 @@ static void __init simone_init_machine(void)
 MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
 	/* Maintainer: Ryan Mallon */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index e200d69471e9..1dfb725671b1 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -153,6 +153,7 @@ static void __init snappercl15_init_machine(void)
 MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
 	/* Maintainer: Ryan Mallon */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h
index 94ef7f275f94..f0986e288d19 100644
--- a/arch/arm/mach-ep93xx/soc.h
+++ b/arch/arm/mach-ep93xx/soc.h
@@ -10,6 +10,7 @@
 #define _EP93XX_SOC_H
 
 #include <mach/ep93xx-regs.h>
+#include "irqs.h"
 
 /*
  * EP93xx Physical Memory Map:
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 12eff8c8074d..e70bac011407 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -22,7 +22,6 @@
 
 #include "gpio-ep93xx.h"
 #include "hardware.h"
-#include <mach/irqs.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -350,6 +349,7 @@ static void __init ts72xx_init_machine(void)
 MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ts72xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -413,6 +413,7 @@ static void __init bk3_init_machine(void)
 MACHINE_START(BK3, "Liebherr controller BK3.1")
 	/* Maintainer: Lukasz Majewski <lukma@denx.de> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ts72xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index e46281e60bf7..30d9cf3791eb 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -302,6 +302,7 @@ static void __init vision_init_machine(void)
 MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS + EP93XX_BOARD_IRQS,
 	.map_io		= vision_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
-- 
2.29.2


  parent reply	other threads:[~2022-04-05  9:19 UTC|newest]

Thread overview: 68+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-05  9:17 [PATCH 00/12] ARM: ARMv5 multiplatform conversions Arnd Bergmann
2022-04-05  9:17 ` Arnd Bergmann
2022-04-05  9:17 ` [PATCH 01/12] ARM: versatile: move integrator/realview/vexpress to versatile Arnd Bergmann
2022-04-05  9:17   ` Arnd Bergmann
2022-04-05 14:15   ` Sudeep Holla
2022-04-05 14:15     ` Sudeep Holla
2022-04-05 18:33     ` Arnd Bergmann
2022-04-05 18:33       ` Arnd Bergmann
2022-04-05 16:30   ` Linus Walleij
2022-04-05 16:30     ` Linus Walleij
2022-04-05  9:17 ` [PATCH 02/12] ARM: ep93xx: renumber interrupts Arnd Bergmann
2022-04-05  9:17   ` Arnd Bergmann
2022-04-05  9:42   ` Lukasz Majewski
2022-04-05  9:42     ` Lukasz Majewski
2022-04-07  8:29   ` Alexander Sverdlin
2022-04-07  8:29     ` Alexander Sverdlin
2022-04-05  9:17 ` Arnd Bergmann [this message]
2022-04-05  9:17   ` [PATCH 03/12] ARM: ep93xx: enable SPARSE_IRQ Arnd Bergmann
2022-04-05  9:42   ` Lukasz Majewski
2022-04-05  9:42     ` Lukasz Majewski
2022-04-07  8:30   ` Alexander Sverdlin
2022-04-07  8:30     ` Alexander Sverdlin
2022-04-05  9:17 ` [PATCH 04/12] ARM: ep93xx: make mach/ep93xx-regs.h local Arnd Bergmann
2022-04-05  9:17   ` Arnd Bergmann
2022-04-05  9:43   ` Lukasz Majewski
2022-04-05  9:43     ` Lukasz Majewski
2022-04-07  8:31   ` Alexander Sverdlin
2022-04-07  8:31     ` Alexander Sverdlin
2022-04-05  9:17 ` [PATCH 05/12] ARM: ep93xx: multiplatform support Arnd Bergmann
2022-04-05  9:17   ` Arnd Bergmann
2022-04-05  9:44   ` Lukasz Majewski
2022-04-05  9:44     ` Lukasz Majewski
2022-04-07  8:32   ` Alexander Sverdlin
2022-04-07  8:32     ` Alexander Sverdlin
2022-04-05  9:17 ` [PATCH 06/12] ARM: dove: " Arnd Bergmann
2022-04-05  9:17   ` Arnd Bergmann
2022-04-05  9:17 ` [PATCH 07/12] ARM: s3c24xx: remove support for ISA drivers on BAST PC/104 Arnd Bergmann
2022-04-05  9:17   ` Arnd Bergmann
2022-04-07  7:27   ` Krzysztof Kozlowski
2022-04-07  7:27     ` Krzysztof Kozlowski
2022-04-05  9:17 ` [PATCH 08/12] ARM: s3c24xx: convert to sparse-irq Arnd Bergmann
2022-04-05  9:17   ` Arnd Bergmann
2022-04-07  7:29   ` Krzysztof Kozlowski
2022-04-07  7:29     ` Krzysztof Kozlowski
2022-04-05  9:17 ` [PATCH 09/12] ARM: s3c: enable s3c24xx multiplatform support Arnd Bergmann
2022-04-05  9:17   ` Arnd Bergmann
2022-04-07  7:30   ` Krzysztof Kozlowski
2022-04-07  7:30     ` Krzysztof Kozlowski
2022-04-05  9:17 ` [PATCH 10/12] ARM: iop32x: enable " Arnd Bergmann
2022-04-05  9:17   ` Arnd Bergmann
2022-04-05  9:17 ` [PATCH 11/12] ARM: rework endianess selection Arnd Bergmann
2022-04-05  9:17   ` Arnd Bergmann
2022-04-05  9:17 ` [PATCH 12/12] ARM: ixp4xx: enable multiplatform support Arnd Bergmann
2022-04-05  9:17   ` Arnd Bergmann
2022-04-07  7:07 ` [PATCH 00/12] ARM: ARMv5 multiplatform conversions Krzysztof Kozlowski
2022-04-07  7:07   ` Krzysztof Kozlowski
2022-04-07  7:31   ` Arnd Bergmann
2022-04-07  7:31     ` Arnd Bergmann
2022-04-07  9:23 ` Alexander Sverdlin
2022-04-07  9:23   ` Alexander Sverdlin
2022-04-07 10:08   ` Arnd Bergmann
2022-04-07 10:08     ` Arnd Bergmann
2022-04-07 10:37     ` Alexander Sverdlin
2022-04-07 10:37       ` Alexander Sverdlin
2022-04-07 20:42 ` Linus Walleij
2022-04-07 20:42   ` Linus Walleij
2022-04-08 15:12   ` Arnd Bergmann
2022-04-08 15:12     ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220405091750.3076973-4-arnd@kernel.org \
    --to=arnd@kernel.org \
    --cc=alexander.sverdlin@gmail.com \
    --cc=alim.akhtar@samsung.com \
    --cc=andrew@lunn.ch \
    --cc=ardb@kernel.org \
    --cc=arnd@arndb.de \
    --cc=geert+renesas@glider.be \
    --cc=gregory.clement@bootlin.com \
    --cc=hsweeten@visionengravers.com \
    --cc=hubert.feurstein@contec.at \
    --cc=kaloz@openwrt.org \
    --cc=khalasa@piap.pl \
    --cc=krzk@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=linux@simtec.co.uk \
    --cc=liviu.dudau@arm.com \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=lukma@denx.de \
    --cc=patches@opensource.cirrus.com \
    --cc=sboyd@kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=sudeep.holla@arm.com \
    --subject='Re: [PATCH 03/12] ARM: ep93xx: enable SPARSE_IRQ' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.