[PATCH net] net: phy: marvell-88x2222: set proper phydev->port

From: Ivan Bornyakov <i.bornyakov@metrotek.ru>
To: unlisted-recipients:; (no To-header on input)
Cc: andrew@lunn.ch, hkallweit1@gmail.com, linux@armlinux.org.uk,
	davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	system@metrotek.ru, Ivan Bornyakov <i.bornyakov@metrotek.ru>
Subject: [PATCH net] net: phy: marvell-88x2222: set proper phydev->port
Date: Tue,  5 Apr 2022 18:03:05 +0300	[thread overview]
Message-ID: <20220405150305.151573-1-i.bornyakov@metrotek.ru> (raw)

phydev->port was not set and always reported as PORT_TP.
Set phydev->port according to inserted SFP module.

Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
---
 drivers/net/phy/marvell-88x2222.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/phy/marvell-88x2222.c b/drivers/net/phy/marvell-88x2222.c
index ec4f1407a78c..9f971b37ec35 100644
--- a/drivers/net/phy/marvell-88x2222.c
+++ b/drivers/net/phy/marvell-88x2222.c
@@ -603,6 +603,7 @@ static int mv2222_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
 	dev = &phydev->mdio.dev;
 
 	sfp_parse_support(phydev->sfp_bus, id, sfp_supported);
+	phydev->port = sfp_parse_port(phydev->sfp_bus, id, sfp_supported);
 	sfp_interface = sfp_select_interface(phydev->sfp_bus, sfp_supported);
 
 	dev_info(dev, "%s SFP module inserted\n", phy_modes(sfp_interface));
@@ -639,6 +640,7 @@ static void mv2222_sfp_remove(void *upstream)
 
 	priv->line_interface = PHY_INTERFACE_MODE_NA;
 	linkmode_zero(priv->supported);
+	phydev->port = PORT_OTHER;
 }
 
 static void mv2222_sfp_link_up(void *upstream)
-- 
2.25.1


