All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Amit Kucheria <amitk@kernel.org>,
	Thara Gopinath <thara.gopinath@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-clk@vger.kernel.org
Subject: [PATCH 4/4] arm: dts: qcom-apq8064: create tsens device node
Date: Wed,  6 Apr 2022 02:59:10 +0300	[thread overview]
Message-ID: <20220405235910.373107-5-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20220405235910.373107-1-dmitry.baryshkov@linaro.org>

Create separate device node for thermal sensors on apq8064 platform.
Move related properties to the newly created device tree node.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064.dtsi | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index b9e9a9f9d3e2..87e8861d647c 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -105,7 +105,7 @@ cpu0-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
-			thermal-sensors = <&gcc 7>;
+			thermal-sensors = <&tsens 7>;
 			coefficients = <1199 0>;
 
 			trips {
@@ -126,7 +126,7 @@ cpu1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
-			thermal-sensors = <&gcc 8>;
+			thermal-sensors = <&tsens 8>;
 			coefficients = <1132 0>;
 
 			trips {
@@ -147,7 +147,7 @@ cpu2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
-			thermal-sensors = <&gcc 9>;
+			thermal-sensors = <&tsens 9>;
 			coefficients = <1199 0>;
 
 			trips {
@@ -168,7 +168,7 @@ cpu3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
-			thermal-sensors = <&gcc 10>;
+			thermal-sensors = <&tsens 10>;
 			coefficients = <1132 0>;
 
 			trips {
@@ -812,12 +812,21 @@ tsens_backup: backup_calib {
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-apq8064";
 			reg = <0x00900000 0x4000>;
-			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-			nvmem-cell-names = "calib", "calib_backup";
 			#clock-cells = <1>;
 			#power-domain-cells = <1>;
 			#reset-cells = <1>;
-			#thermal-sensor-cells = <1>;
+
+			tsens: thermal-sensor@900000 {
+				compatible = "qcom,msm8960-tsens";
+
+				nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+				nvmem-cell-names = "calib", "calib_backup";
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "uplow";
+
+				#qcom,sensors = <11>;
+				#thermal-sensor-cells = <1>;
+			};
 		};
 
 		lcc: clock-controller@28000000 {
-- 
2.35.1


      parent reply	other threads:[~2022-04-06  5:41 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-05 23:59 [PATCH 0/4] arm: qcom: qcom-apq8064: add separate device node for tsens Dmitry Baryshkov
2022-04-05 23:59 ` [PATCH 1/4] dt-bindings: thermal: qcom-tsens.yaml: add msm8960 compat string Dmitry Baryshkov
2022-04-05 23:59 ` [PATCH 2/4] thermal/drivers/tsens: add compat string for the qcom,msm8960 Dmitry Baryshkov
2022-04-05 23:59 ` [PATCH 3/4] clk: qcom: gcc-msm8960: create tsens device if there are no child nodes Dmitry Baryshkov
2022-04-05 23:59 ` Dmitry Baryshkov [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220405235910.373107-5-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=agross@kernel.org \
    --cc=amitk@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=thara.gopinath@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.