All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chen Yu <yu.c.chen@intel.com>
To: linux-pm@vger.kernel.org
Cc: "Rafael J. Wysocki" <rafael@kernel.org>,
	Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
	Vincent Guittot <vincent.guittot@linaro.org>,
	Peter Zijlstra <peterz@infradead.org>,
	Len Brown <len.brown@intel.com>, Tim Chen <tim.c.chen@intel.com>,
	Giovanni Gherdovich <ggherdovich@suse.cz>,
	Chen Yu <yu.chen.surf@gmail.com>,
	linux-kernel@vger.kernel.org, Zhang Rui <rui.zhang@intel.com>,
	Chen Yu <yu.c.chen@intel.com>
Subject: [PATCH] cpufreq: intel_pstate: Handle no_turbo in frequency invariance
Date: Fri,  8 Apr 2022 07:42:58 +0800	[thread overview]
Message-ID: <20220407234258.569681-1-yu.c.chen@intel.com> (raw)

Problem statement:
Once the user has disabled turbo frequency by
echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo,
the cfs_rq's util_avg becomes quite small when compared with
CPU capacity.

Step to reproduce:

echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo

./x86_cpuload --count 1 --start 3 --timeout 100 --busy 99
would launch 1 thread and bind it to CPU3, lasting for 100 seconds,
with a CPU utilization of 99%. [1]

top result:
%Cpu3  : 98.4 us,  0.0 sy,  0.0 ni,  1.6 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st

check util_avg:
cat /sys/kernel/debug/sched/debug | grep "cfs_rq\[3\]" -A 20 | grep util_avg
  .util_avg                      : 611

So the util_avg/cpu capacity is 611/1024, which is much smaller than
98.4% shown in the top result.

This might impact some logic in the scheduler. For example, group_is_overloaded()
would compare the group_capacity and group_util in the sched group, to
check if this sched group is overloaded or not. With this gap, even
when there is a nearly 100% workload, the sched group will not be regarded
as overloaded. Besides group_is_overloaded(), there are also other victims.
There is a ongoing work that aims to optimize the task wakeup in a LLC domain.
The main idea is to stop searching idle CPUs if the sched domain is overloaded[2].
This proposal also relies on the util_avg/CPU capacity to decide whether the LLC
domain is overloaded.

Analysis:
CPU frequency invariance has caused this difference. In summary,
the util_sum of cfs rq would decay quite fast when the CPU is in
idle, when the CPU frequency invariance is enabled.

The detail is as followed:

As depicted in update_rq_clock_pelt(), when the frequency invariance
is enabled, there would be two clock variables on each rq, clock_task
and clock_pelt:

   The clock_pelt scales the time to reflect the effective amount of
   computation done during the running delta time but then syncs back to
   clock_task when rq is idle.

   absolute time    | 1| 2| 3| 4| 5| 6| 7| 8| 9|10|11|12|13|14|15|16
   @ max frequency  ------******---------------******---------------
   @ half frequency ------************---------************---------
   clock pelt       | 1| 2|    3|    4| 7| 8| 9|   10|   11|14|15|16

The fast decay of util_sum during idle is due to:
1. rq->clock_pelt is always behind rq->clock_task
2. rq->last_update is updated to rq->clock_pelt' after invoking ___update_load_sum()
3. Then the CPU becomes idle, the rq->clock_pelt' would be suddenly increased
   a lot to rq->clock_task
4. Enters ___update_load_sum() again, the idle period is calculated by
   rq->clock_task - rq->last_update, AKA, rq->clock_task - rq->clock_pelt'.
   The lower the CPU frequency is, the larger the delta =
   rq->clock_task - rq->clock_pelt' will be. Since the idle period will be
   used to decay the util_sum only, the util_sum drops significantly during
   idle period.

Proposal:
This symptom is not only caused by disabling turbo frequency, but it
would also appear if the user limits the max frequency at runtime. Because
if the frequency is always lower than the max frequency,
CPU frequency invariance would decay the util_sum quite fast during idle.

As some end users would disable turbo after boot up, this patch aims to
present this symptom and deals with turbo scenarios for now. It might
be ideal if CPU frequency invariance is aware of the max CPU frequency
(user specified) at runtime in the future.

[Previous patch seems to be lost on LKML, this is a resend, sorry for any
inconvenience]

Link: https://github.com/yu-chen-surf/x86_cpuload.git #1
Link: https://lore.kernel.org/lkml/20220310005228.11737-1-yu.c.chen@intel.com/ #2
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
---
 drivers/cpufreq/intel_pstate.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 846bb3a78788..2216b24b6f84 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -1322,6 +1322,7 @@ static ssize_t store_no_turbo(struct kobject *a, struct kobj_attribute *b,
 	mutex_unlock(&intel_pstate_limits_lock);
 
 	intel_pstate_update_policies();
+	arch_set_max_freq_ratio(global.no_turbo);
 
 	mutex_unlock(&intel_pstate_driver_lock);
 
-- 
2.25.1


             reply	other threads:[~2022-04-07 15:44 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-07 23:42 Chen Yu [this message]
2022-04-08  8:22 ` [PATCH] cpufreq: intel_pstate: Handle no_turbo in frequency invariance Peter Zijlstra
2022-04-08 14:22 ` Giovanni Gherdovich
2022-04-13 15:39   ` Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220407234258.569681-1-yu.c.chen@intel.com \
    --to=yu.c.chen@intel.com \
    --cc=ggherdovich@suse.cz \
    --cc=len.brown@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=peterz@infradead.org \
    --cc=rafael@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=srinivas.pandruvada@linux.intel.com \
    --cc=tim.c.chen@intel.com \
    --cc=vincent.guittot@linaro.org \
    --cc=yu.chen.surf@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.