All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2] staging: r8188eu: correct multiple misspellings in the source driver
@ 2022-04-12 21:54 Mahak Gupta
  2022-04-13  6:14 ` Julia Lawall
  0 siblings, 1 reply; 3+ messages in thread
From: Mahak Gupta @ 2022-04-12 21:54 UTC (permalink / raw)
  To: Larry.Finger, phil, gregkh, linux-staging, linux-kernel, outreachy
  Cc: Mahak Gupta

Fix multiple spelling errors reported by checkpatch.

Signed-off-by: Mahak Gupta <mahak_g@cs.iitr.ac.in>
---
v1 -> v2: Updated the subject and description of the patch
---
 drivers/staging/r8188eu/core/rtw_ioctl_set.c |  2 +-
 drivers/staging/r8188eu/core/rtw_mlme.c      | 10 +++---
 drivers/staging/r8188eu/core/rtw_mlme_ext.c  | 36 ++++++++++----------
 drivers/staging/r8188eu/core/rtw_recv.c      |  8 ++---
 drivers/staging/r8188eu/core/rtw_xmit.c      |  8 ++---
 5 files changed, 32 insertions(+), 32 deletions(-)

diff --git a/drivers/staging/r8188eu/core/rtw_ioctl_set.c b/drivers/staging/r8188eu/core/rtw_ioctl_set.c
index 4b78e42d180d..9df6fb122bc5 100644
--- a/drivers/staging/r8188eu/core/rtw_ioctl_set.c
+++ b/drivers/staging/r8188eu/core/rtw_ioctl_set.c
@@ -290,7 +290,7 @@ u8 rtw_set_802_11_infrastructure_mode(struct adapter *padapter,
 
 		if ((*pold_state == Ndis802_11Infrastructure) || (*pold_state == Ndis802_11IBSS)) {
 			if (check_fwstate(pmlmepriv, _FW_LINKED))
-				rtw_indicate_disconnect(padapter); /* will clr Linked_state; before this function, we must have chked whether  issue dis-assoc_cmd or not */
+				rtw_indicate_disconnect(padapter); /* will clr Linked_state; before this function, we must have checked whether  issue dis-assoc_cmd or not */
 	       }
 
 		*pold_state = networktype;
diff --git a/drivers/staging/r8188eu/core/rtw_mlme.c b/drivers/staging/r8188eu/core/rtw_mlme.c
index c90f36dee1ea..a2b42779bc87 100644
--- a/drivers/staging/r8188eu/core/rtw_mlme.c
+++ b/drivers/staging/r8188eu/core/rtw_mlme.c
@@ -193,7 +193,7 @@ void _rtw_free_network_nolock(struct	mlme_priv *pmlmepriv, struct wlan_network *
 /*
 	return the wlan_network with the matching addr
 
-	Shall be calle under atomic context... to avoid possible racing condition...
+	Shall be called under atomic context... to avoid possible racing condition...
 */
 struct wlan_network *_rtw_find_network(struct __queue *scanned_queue, u8 *addr)
 {
@@ -329,7 +329,7 @@ void rtw_free_network_queue(struct adapter *dev, u8 isfreeall)
 /*
 	return the wlan_network with the matching addr
 
-	Shall be calle under atomic context... to avoid possible racing condition...
+	Shall be called under atomic context... to avoid possible racing condition...
 */
 struct	wlan_network *rtw_find_network(struct __queue *scanned_queue, u8 *addr)
 {
@@ -912,7 +912,7 @@ static struct sta_info *rtw_joinbss_update_stainfo(struct adapter *padapter, str
 		}
 		/* 	Commented by Albert 2012/07/21 */
 		/* 	When doing the WPS, the wps_ie_len won't equal to 0 */
-		/* 	And the Wi-Fi driver shouldn't allow the data packet to be tramsmitted. */
+		/* 	And the Wi-Fi driver shouldn't allow the data packet to be transmitted. */
 		if (padapter->securitypriv.wps_ie_len != 0) {
 			psta->ieee8021x_blocked = true;
 			padapter->securitypriv.wps_ie_len = 0;
@@ -1304,7 +1304,7 @@ void rtw_stadel_event_callback(struct adapter *adapter, u8 *pbuf)
 }
 
 /*
-* _rtw_join_timeout_handler - Timeout/faliure handler for CMD JoinBss
+* _rtw_join_timeout_handler - Timeout/failure handler for CMD JoinBss
 * @adapter: pointer to struct adapter structure
 */
 void _rtw_join_timeout_handler (struct adapter *adapter)
@@ -1339,7 +1339,7 @@ void _rtw_join_timeout_handler (struct adapter *adapter)
 }
 
 /*
-* rtw_scan_timeout_handler - Timeout/Faliure handler for CMD SiteSurvey
+* rtw_scan_timeout_handler - Timeout/Failure handler for CMD SiteSurvey
 * @adapter: pointer to struct adapter structure
 */
 void rtw_scan_timeout_handler (struct adapter *adapter)
diff --git a/drivers/staging/r8188eu/core/rtw_mlme_ext.c b/drivers/staging/r8188eu/core/rtw_mlme_ext.c
index 474391bf7cb5..fd445aa09377 100644
--- a/drivers/staging/r8188eu/core/rtw_mlme_ext.c
+++ b/drivers/staging/r8188eu/core/rtw_mlme_ext.c
@@ -156,7 +156,7 @@ static struct rt_channel_plan_map	RTW_ChannelPlanMap[RT_CHANNEL_DOMAIN_MAX] = {
 	{0x03},	/* 0x41, RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN_2G */
 };
 
-static struct rt_channel_plan_map RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE = {0x03}; /* use the conbination for max channel numbers */
+static struct rt_channel_plan_map RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE = {0x03}; /* use the combination for max channel numbers */
 
 /*
  * Search the @param channel_num in given @param channel_set
@@ -1733,7 +1733,7 @@ void issue_p2p_GO_request(struct adapter *padapter, u8 *raddr)
 	p2pie[p2pielen++] = 0x09;	/*	WFA P2P v1.0 */
 
 	/*	Commented by Albert 20110306 */
-	/*	According to the P2P Specification, the group negoitation request frame should contain 9 P2P attributes */
+	/*	According to the P2P Specification, the group negotiation request frame should contain 9 P2P attributes */
 	/*	1. P2P Capability */
 	/*	2. Group Owner Intent */
 	/*	3. Configuration Timeout */
@@ -2088,7 +2088,7 @@ static void issue_p2p_GO_response(struct adapter *padapter, u8 *raddr, u8 *frame
 	p2pie[p2pielen++] = 0x09;	/*	WFA P2P v1.0 */
 
 	/*	Commented by Albert 20100908 */
-	/*	According to the P2P Specification, the group negoitation response frame should contain 9 P2P attributes */
+	/*	According to the P2P Specification, the group negotiation response frame should contain 9 P2P attributes */
 	/*	1. Status */
 	/*	2. P2P Capability */
 	/*	3. Group Owner Intent */
@@ -2384,7 +2384,7 @@ static void issue_p2p_GO_confirm(struct adapter *padapter, u8 *raddr, u8 result)
 	p2pie[p2pielen++] = 0x09;	/*	WFA P2P v1.0 */
 
 	/*	Commented by Albert 20110306 */
-	/*	According to the P2P Specification, the group negoitation request frame should contain 5 P2P attributes */
+	/*	According to the P2P Specification, the group negotiation request frame should contain 5 P2P attributes */
 	/*	1. Status */
 	/*	2. P2P Capability */
 	/*	3. Operating Channel */
@@ -4009,7 +4009,7 @@ struct xmit_frame *alloc_mgtxmitframe(struct xmit_priv *pxmitpriv)
 
 /****************************************************************************
 
-Following are some TX fuctions for WiFi MLME
+Following are some TX functions for WiFi MLME
 
 *****************************************************************************/
 
@@ -4611,7 +4611,7 @@ int issue_probereq_ex(struct adapter *padapter, struct ndis_802_11_ssid *pssid,
 	return ret;
 }
 
-/*  if psta == NULL, indiate we are station(client) now... */
+/*  if psta == NULL, indicate we are station(client) now... */
 void issue_auth(struct adapter *padapter, struct sta_info *psta, unsigned short status)
 {
 	struct xmit_frame *pmgntframe;
@@ -5010,7 +5010,7 @@ void issue_assocreq(struct adapter *padapter)
 				if (!padapter->registrypriv.wifi_spec) {
 					/* Commented by Kurt 20110629 */
 					/* In some older APs, WPS handshake */
-					/* would be fail if we append vender extensions informations to AP */
+					/* would be fail if we append vender extensions information to AP */
 					if (!memcmp(pIE->data, WPS_OUI, 4))
 						pIE->Length = 14;
 				}
@@ -5165,7 +5165,7 @@ void issue_assocreq(struct adapter *padapter)
 		kfree(pmlmepriv->assoc_req);
 }
 
-/* when wait_ack is ture, this function shoule be called at process context */
+/* when wait_ack is true, this function should be called at process context */
 static int _issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned int power_mode, int wait_ack)
 {
 	int ret = _FAIL;
@@ -5234,7 +5234,7 @@ static int _issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned
 	return ret;
 }
 
-/* when wait_ms > 0 , this function shoule be called at process context */
+/* when wait_ms > 0 , this function should be called at process context */
 /* da == NULL for station mode */
 int issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned int power_mode, int try_cnt, int wait_ms)
 {
@@ -5243,7 +5243,7 @@ int issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned int pow
 	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
 	struct mlme_ext_info	*pmlmeinfo = &pmlmeext->mlmext_info;
 
-	/* da == NULL, assum it's null data for sta to ap*/
+	/* da == NULL, assume it's null data for sta to ap*/
 	if (!da)
 		da = get_my_bssid(&pmlmeinfo->network);
 
@@ -5267,7 +5267,7 @@ int issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned int pow
 	return ret;
 }
 
-/* when wait_ack is ture, this function shoule be called at process context */
+/* when wait_ack is true, this function should be called at process context */
 static int _issue_qos_nulldata(struct adapter *padapter, unsigned char *da, u16 tid, int wait_ack)
 {
 	int ret = _FAIL;
@@ -5340,7 +5340,7 @@ static int _issue_qos_nulldata(struct adapter *padapter, unsigned char *da, u16
 	return ret;
 }
 
-/* when wait_ms > 0 , this function shoule be called at process context */
+/* when wait_ms > 0 , this function should be called at process context */
 /* da == NULL for station mode */
 int issue_qos_nulldata(struct adapter *padapter, unsigned char *da, u16 tid, int try_cnt, int wait_ms)
 {
@@ -5349,7 +5349,7 @@ int issue_qos_nulldata(struct adapter *padapter, unsigned char *da, u16 tid, int
 	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
 	struct mlme_ext_info	*pmlmeinfo = &pmlmeext->mlmext_info;
 
-	/* da == NULL, assum it's null data for sta to ap*/
+	/* da == NULL, assume it's null data for sta to ap*/
 	if (!da)
 		da = get_my_bssid(&pmlmeinfo->network);
 
@@ -5790,7 +5790,7 @@ void clear_beacon_valid_bit(struct adapter *adapter)
 
 /****************************************************************************
 
-Following are some utitity fuctions for WiFi MLME
+Following are some utility functions for WiFi MLME
 
 *****************************************************************************/
 
@@ -5888,7 +5888,7 @@ void site_survey(struct adapter *padapter)
 		} else {
 			/*  20100721:Interrupt scan operation here. */
 			/*  For SW antenna diversity before link, it needs to switch to another antenna and scan again. */
-			/*  It compares the scan result and select beter one to do connection. */
+			/*  It compares the scan result and select better one to do connection. */
 			if (AntDivBeforeLink8188E(padapter)) {
 				pmlmeext->sitesurvey_res.bss_cnt = 0;
 				pmlmeext->sitesurvey_res.channel_idx = -1;
@@ -6109,7 +6109,7 @@ void start_create_ibss(struct adapter *padapter)
 	/* update wireless mode */
 	update_wireless_mode(padapter);
 
-	/* udpate capability */
+	/* update capability */
 	caps = rtw_get_capability((struct wlan_bssid_ex *)pnetwork);
 	update_capinfo(padapter, caps);
 	if (caps & cap_IBSS) {/* adhoc master */
@@ -6160,7 +6160,7 @@ void start_clnt_join(struct adapter *padapter)
 	/* update wireless mode */
 	update_wireless_mode(padapter);
 
-	/* udpate capability */
+	/* update capability */
 	caps = rtw_get_capability((struct wlan_bssid_ex *)pnetwork);
 	update_capinfo(padapter, caps);
 	if (caps & cap_ESS) {
@@ -6740,7 +6740,7 @@ void mlmeext_joinbss_event_callback(struct adapter *padapter, int join_res)
 	/* BCN interval */
 	rtw_write16(padapter, REG_BCN_INTERVAL, pmlmeinfo->bcn_interval);
 
-	/* udpate capability */
+	/* update capability */
 	update_capinfo(padapter, pmlmeinfo->capability);
 
 	/* WMM, Update EDCA param */
diff --git a/drivers/staging/r8188eu/core/rtw_recv.c b/drivers/staging/r8188eu/core/rtw_recv.c
index 91a6e0f035f4..a3f71697f6d7 100644
--- a/drivers/staging/r8188eu/core/rtw_recv.c
+++ b/drivers/staging/r8188eu/core/rtw_recv.c
@@ -877,7 +877,7 @@ static void validate_recv_ctrl_frame(struct adapter *padapter,
 			if (psta->sleepq_len == 0) {
 				pstapriv->tim_bitmap &= ~BIT(psta->aid);
 
-				/* upate BCN for TIM IE */
+				/* update BCN for TIM IE */
 				/* update_BCNTIM(padapter); */
 				update_beacon(padapter, _TIM_IE_, NULL, false);
 			}
@@ -891,7 +891,7 @@ static void validate_recv_ctrl_frame(struct adapter *padapter,
 
 				pstapriv->tim_bitmap &= ~BIT(psta->aid);
 
-				/* upate BCN for TIM IE */
+				/* update BCN for TIM IE */
 				/* update_BCNTIM(padapter); */
 				update_beacon(padapter, _TIM_IE_, NULL, false);
 			}
@@ -1810,13 +1810,13 @@ void rtw_signal_stat_timer_hdl(struct timer_list *t)
 	} else {
 		if (recvpriv->signal_strength_data.update_req == 0) {/*  update_req is clear, means we got rx */
 			avg_signal_strength = recvpriv->signal_strength_data.avg_val;
-			/*  after avg_vals are accquired, we can re-stat the signal values */
+			/*  after avg_vals are acquired, we can re-stat the signal values */
 			recvpriv->signal_strength_data.update_req = 1;
 		}
 
 		if (recvpriv->signal_qual_data.update_req == 0) {/*  update_req is clear, means we got rx */
 			avg_signal_qual = recvpriv->signal_qual_data.avg_val;
-			/*  after avg_vals are accquired, we can re-stat the signal values */
+			/*  after avg_vals are acquired, we can re-stat the signal values */
 			recvpriv->signal_qual_data.update_req = 1;
 		}
 
diff --git a/drivers/staging/r8188eu/core/rtw_xmit.c b/drivers/staging/r8188eu/core/rtw_xmit.c
index 029b994e1b71..2a686b5c65b1 100644
--- a/drivers/staging/r8188eu/core/rtw_xmit.c
+++ b/drivers/staging/r8188eu/core/rtw_xmit.c
@@ -958,7 +958,7 @@ s32 rtw_xmitframe_coalesce(struct adapter *padapter, struct sk_buff *pkt, struct
 		}
 
 		if (bmcst) {
-			/*  don't do fragment to broadcat/multicast packets */
+			/*  don't do fragment to broadcast/multicast packets */
 			mem_sz = _rtw_pktfile_read(&pktfile, pframe, pattrib->pktlen);
 		} else {
 			mem_sz = _rtw_pktfile_read(&pktfile, pframe, mpdu_len);
@@ -1768,7 +1768,7 @@ int xmitframe_enqueue_for_sleeping_sta(struct adapter *padapter, struct xmit_fra
 			pstapriv->tim_bitmap |= BIT(0);/*  */
 			pstapriv->sta_dz_bitmap |= BIT(0);
 
-			update_beacon(padapter, _TIM_IE_, NULL, false);/* tx bc/mc packets after upate bcn */
+			update_beacon(padapter, _TIM_IE_, NULL, false);/* tx bc/mc packets after update bcn */
 
 			ret = true;
 		}
@@ -1818,7 +1818,7 @@ int xmitframe_enqueue_for_sleeping_sta(struct adapter *padapter, struct xmit_fra
 				pstapriv->tim_bitmap |= BIT(psta->aid);
 
 				if (psta->sleepq_len == 1) {
-					/* upate BCN for TIM IE */
+					/* update BCN for TIM IE */
 					update_beacon(padapter, _TIM_IE_, NULL, false);
 				}
 			}
@@ -2087,7 +2087,7 @@ void xmit_delivery_enabled_frames(struct adapter *padapter, struct sta_info *pst
 		if ((psta->sleepq_ac_len == 0) && (!psta->has_legacy_ac) && (wmmps_ac)) {
 			pstapriv->tim_bitmap &= ~BIT(psta->aid);
 
-			/* upate BCN for TIM IE */
+			/* update BCN for TIM IE */
 			update_beacon(padapter, _TIM_IE_, NULL, false);
 		}
 	}
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH v2] staging: r8188eu: correct multiple misspellings in the source driver
  2022-04-12 21:54 [PATCH v2] staging: r8188eu: correct multiple misspellings in the source driver Mahak Gupta
@ 2022-04-13  6:14 ` Julia Lawall
  2022-04-13  6:58   ` MAHAK GUPTA
  0 siblings, 1 reply; 3+ messages in thread
From: Julia Lawall @ 2022-04-13  6:14 UTC (permalink / raw)
  To: Mahak Gupta
  Cc: Larry.Finger, phil, gregkh, linux-staging, linux-kernel, outreachy

When you send a change to a patch, the version number has to increase.
Greg will take the patch with the largest version.  He wants there to be
only one.

In the source driver is not any more useful than in r8188eu.  Just drop
that part.

On Wed, 13 Apr 2022, Mahak Gupta wrote:

> Fix multiple spelling errors reported by checkpatch.

Here you could say that all the errors are in comments.  That would remove
any concern that the behavior of the code is changed.

julia

> Signed-off-by: Mahak Gupta <mahak_g@cs.iitr.ac.in>
> ---
> v1 -> v2: Updated the subject and description of the patch
> ---
>  drivers/staging/r8188eu/core/rtw_ioctl_set.c |  2 +-
>  drivers/staging/r8188eu/core/rtw_mlme.c      | 10 +++---
>  drivers/staging/r8188eu/core/rtw_mlme_ext.c  | 36 ++++++++++----------
>  drivers/staging/r8188eu/core/rtw_recv.c      |  8 ++---
>  drivers/staging/r8188eu/core/rtw_xmit.c      |  8 ++---
>  5 files changed, 32 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/staging/r8188eu/core/rtw_ioctl_set.c b/drivers/staging/r8188eu/core/rtw_ioctl_set.c
> index 4b78e42d180d..9df6fb122bc5 100644
> --- a/drivers/staging/r8188eu/core/rtw_ioctl_set.c
> +++ b/drivers/staging/r8188eu/core/rtw_ioctl_set.c
> @@ -290,7 +290,7 @@ u8 rtw_set_802_11_infrastructure_mode(struct adapter *padapter,
>
>  		if ((*pold_state == Ndis802_11Infrastructure) || (*pold_state == Ndis802_11IBSS)) {
>  			if (check_fwstate(pmlmepriv, _FW_LINKED))
> -				rtw_indicate_disconnect(padapter); /* will clr Linked_state; before this function, we must have chked whether  issue dis-assoc_cmd or not */
> +				rtw_indicate_disconnect(padapter); /* will clr Linked_state; before this function, we must have checked whether  issue dis-assoc_cmd or not */
>  	       }
>
>  		*pold_state = networktype;
> diff --git a/drivers/staging/r8188eu/core/rtw_mlme.c b/drivers/staging/r8188eu/core/rtw_mlme.c
> index c90f36dee1ea..a2b42779bc87 100644
> --- a/drivers/staging/r8188eu/core/rtw_mlme.c
> +++ b/drivers/staging/r8188eu/core/rtw_mlme.c
> @@ -193,7 +193,7 @@ void _rtw_free_network_nolock(struct	mlme_priv *pmlmepriv, struct wlan_network *
>  /*
>  	return the wlan_network with the matching addr
>
> -	Shall be calle under atomic context... to avoid possible racing condition...
> +	Shall be called under atomic context... to avoid possible racing condition...
>  */
>  struct wlan_network *_rtw_find_network(struct __queue *scanned_queue, u8 *addr)
>  {
> @@ -329,7 +329,7 @@ void rtw_free_network_queue(struct adapter *dev, u8 isfreeall)
>  /*
>  	return the wlan_network with the matching addr
>
> -	Shall be calle under atomic context... to avoid possible racing condition...
> +	Shall be called under atomic context... to avoid possible racing condition...
>  */
>  struct	wlan_network *rtw_find_network(struct __queue *scanned_queue, u8 *addr)
>  {
> @@ -912,7 +912,7 @@ static struct sta_info *rtw_joinbss_update_stainfo(struct adapter *padapter, str
>  		}
>  		/* 	Commented by Albert 2012/07/21 */
>  		/* 	When doing the WPS, the wps_ie_len won't equal to 0 */
> -		/* 	And the Wi-Fi driver shouldn't allow the data packet to be tramsmitted. */
> +		/* 	And the Wi-Fi driver shouldn't allow the data packet to be transmitted. */
>  		if (padapter->securitypriv.wps_ie_len != 0) {
>  			psta->ieee8021x_blocked = true;
>  			padapter->securitypriv.wps_ie_len = 0;
> @@ -1304,7 +1304,7 @@ void rtw_stadel_event_callback(struct adapter *adapter, u8 *pbuf)
>  }
>
>  /*
> -* _rtw_join_timeout_handler - Timeout/faliure handler for CMD JoinBss
> +* _rtw_join_timeout_handler - Timeout/failure handler for CMD JoinBss
>  * @adapter: pointer to struct adapter structure
>  */
>  void _rtw_join_timeout_handler (struct adapter *adapter)
> @@ -1339,7 +1339,7 @@ void _rtw_join_timeout_handler (struct adapter *adapter)
>  }
>
>  /*
> -* rtw_scan_timeout_handler - Timeout/Faliure handler for CMD SiteSurvey
> +* rtw_scan_timeout_handler - Timeout/Failure handler for CMD SiteSurvey
>  * @adapter: pointer to struct adapter structure
>  */
>  void rtw_scan_timeout_handler (struct adapter *adapter)
> diff --git a/drivers/staging/r8188eu/core/rtw_mlme_ext.c b/drivers/staging/r8188eu/core/rtw_mlme_ext.c
> index 474391bf7cb5..fd445aa09377 100644
> --- a/drivers/staging/r8188eu/core/rtw_mlme_ext.c
> +++ b/drivers/staging/r8188eu/core/rtw_mlme_ext.c
> @@ -156,7 +156,7 @@ static struct rt_channel_plan_map	RTW_ChannelPlanMap[RT_CHANNEL_DOMAIN_MAX] = {
>  	{0x03},	/* 0x41, RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN_2G */
>  };
>
> -static struct rt_channel_plan_map RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE = {0x03}; /* use the conbination for max channel numbers */
> +static struct rt_channel_plan_map RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE = {0x03}; /* use the combination for max channel numbers */
>
>  /*
>   * Search the @param channel_num in given @param channel_set
> @@ -1733,7 +1733,7 @@ void issue_p2p_GO_request(struct adapter *padapter, u8 *raddr)
>  	p2pie[p2pielen++] = 0x09;	/*	WFA P2P v1.0 */
>
>  	/*	Commented by Albert 20110306 */
> -	/*	According to the P2P Specification, the group negoitation request frame should contain 9 P2P attributes */
> +	/*	According to the P2P Specification, the group negotiation request frame should contain 9 P2P attributes */
>  	/*	1. P2P Capability */
>  	/*	2. Group Owner Intent */
>  	/*	3. Configuration Timeout */
> @@ -2088,7 +2088,7 @@ static void issue_p2p_GO_response(struct adapter *padapter, u8 *raddr, u8 *frame
>  	p2pie[p2pielen++] = 0x09;	/*	WFA P2P v1.0 */
>
>  	/*	Commented by Albert 20100908 */
> -	/*	According to the P2P Specification, the group negoitation response frame should contain 9 P2P attributes */
> +	/*	According to the P2P Specification, the group negotiation response frame should contain 9 P2P attributes */
>  	/*	1. Status */
>  	/*	2. P2P Capability */
>  	/*	3. Group Owner Intent */
> @@ -2384,7 +2384,7 @@ static void issue_p2p_GO_confirm(struct adapter *padapter, u8 *raddr, u8 result)
>  	p2pie[p2pielen++] = 0x09;	/*	WFA P2P v1.0 */
>
>  	/*	Commented by Albert 20110306 */
> -	/*	According to the P2P Specification, the group negoitation request frame should contain 5 P2P attributes */
> +	/*	According to the P2P Specification, the group negotiation request frame should contain 5 P2P attributes */
>  	/*	1. Status */
>  	/*	2. P2P Capability */
>  	/*	3. Operating Channel */
> @@ -4009,7 +4009,7 @@ struct xmit_frame *alloc_mgtxmitframe(struct xmit_priv *pxmitpriv)
>
>  /****************************************************************************
>
> -Following are some TX fuctions for WiFi MLME
> +Following are some TX functions for WiFi MLME
>
>  *****************************************************************************/
>
> @@ -4611,7 +4611,7 @@ int issue_probereq_ex(struct adapter *padapter, struct ndis_802_11_ssid *pssid,
>  	return ret;
>  }
>
> -/*  if psta == NULL, indiate we are station(client) now... */
> +/*  if psta == NULL, indicate we are station(client) now... */
>  void issue_auth(struct adapter *padapter, struct sta_info *psta, unsigned short status)
>  {
>  	struct xmit_frame *pmgntframe;
> @@ -5010,7 +5010,7 @@ void issue_assocreq(struct adapter *padapter)
>  				if (!padapter->registrypriv.wifi_spec) {
>  					/* Commented by Kurt 20110629 */
>  					/* In some older APs, WPS handshake */
> -					/* would be fail if we append vender extensions informations to AP */
> +					/* would be fail if we append vender extensions information to AP */
>  					if (!memcmp(pIE->data, WPS_OUI, 4))
>  						pIE->Length = 14;
>  				}
> @@ -5165,7 +5165,7 @@ void issue_assocreq(struct adapter *padapter)
>  		kfree(pmlmepriv->assoc_req);
>  }
>
> -/* when wait_ack is ture, this function shoule be called at process context */
> +/* when wait_ack is true, this function should be called at process context */
>  static int _issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned int power_mode, int wait_ack)
>  {
>  	int ret = _FAIL;
> @@ -5234,7 +5234,7 @@ static int _issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned
>  	return ret;
>  }
>
> -/* when wait_ms > 0 , this function shoule be called at process context */
> +/* when wait_ms > 0 , this function should be called at process context */
>  /* da == NULL for station mode */
>  int issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned int power_mode, int try_cnt, int wait_ms)
>  {
> @@ -5243,7 +5243,7 @@ int issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned int pow
>  	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
>  	struct mlme_ext_info	*pmlmeinfo = &pmlmeext->mlmext_info;
>
> -	/* da == NULL, assum it's null data for sta to ap*/
> +	/* da == NULL, assume it's null data for sta to ap*/
>  	if (!da)
>  		da = get_my_bssid(&pmlmeinfo->network);
>
> @@ -5267,7 +5267,7 @@ int issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned int pow
>  	return ret;
>  }
>
> -/* when wait_ack is ture, this function shoule be called at process context */
> +/* when wait_ack is true, this function should be called at process context */
>  static int _issue_qos_nulldata(struct adapter *padapter, unsigned char *da, u16 tid, int wait_ack)
>  {
>  	int ret = _FAIL;
> @@ -5340,7 +5340,7 @@ static int _issue_qos_nulldata(struct adapter *padapter, unsigned char *da, u16
>  	return ret;
>  }
>
> -/* when wait_ms > 0 , this function shoule be called at process context */
> +/* when wait_ms > 0 , this function should be called at process context */
>  /* da == NULL for station mode */
>  int issue_qos_nulldata(struct adapter *padapter, unsigned char *da, u16 tid, int try_cnt, int wait_ms)
>  {
> @@ -5349,7 +5349,7 @@ int issue_qos_nulldata(struct adapter *padapter, unsigned char *da, u16 tid, int
>  	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
>  	struct mlme_ext_info	*pmlmeinfo = &pmlmeext->mlmext_info;
>
> -	/* da == NULL, assum it's null data for sta to ap*/
> +	/* da == NULL, assume it's null data for sta to ap*/
>  	if (!da)
>  		da = get_my_bssid(&pmlmeinfo->network);
>
> @@ -5790,7 +5790,7 @@ void clear_beacon_valid_bit(struct adapter *adapter)
>
>  /****************************************************************************
>
> -Following are some utitity fuctions for WiFi MLME
> +Following are some utility functions for WiFi MLME
>
>  *****************************************************************************/
>
> @@ -5888,7 +5888,7 @@ void site_survey(struct adapter *padapter)
>  		} else {
>  			/*  20100721:Interrupt scan operation here. */
>  			/*  For SW antenna diversity before link, it needs to switch to another antenna and scan again. */
> -			/*  It compares the scan result and select beter one to do connection. */
> +			/*  It compares the scan result and select better one to do connection. */
>  			if (AntDivBeforeLink8188E(padapter)) {
>  				pmlmeext->sitesurvey_res.bss_cnt = 0;
>  				pmlmeext->sitesurvey_res.channel_idx = -1;
> @@ -6109,7 +6109,7 @@ void start_create_ibss(struct adapter *padapter)
>  	/* update wireless mode */
>  	update_wireless_mode(padapter);
>
> -	/* udpate capability */
> +	/* update capability */
>  	caps = rtw_get_capability((struct wlan_bssid_ex *)pnetwork);
>  	update_capinfo(padapter, caps);
>  	if (caps & cap_IBSS) {/* adhoc master */
> @@ -6160,7 +6160,7 @@ void start_clnt_join(struct adapter *padapter)
>  	/* update wireless mode */
>  	update_wireless_mode(padapter);
>
> -	/* udpate capability */
> +	/* update capability */
>  	caps = rtw_get_capability((struct wlan_bssid_ex *)pnetwork);
>  	update_capinfo(padapter, caps);
>  	if (caps & cap_ESS) {
> @@ -6740,7 +6740,7 @@ void mlmeext_joinbss_event_callback(struct adapter *padapter, int join_res)
>  	/* BCN interval */
>  	rtw_write16(padapter, REG_BCN_INTERVAL, pmlmeinfo->bcn_interval);
>
> -	/* udpate capability */
> +	/* update capability */
>  	update_capinfo(padapter, pmlmeinfo->capability);
>
>  	/* WMM, Update EDCA param */
> diff --git a/drivers/staging/r8188eu/core/rtw_recv.c b/drivers/staging/r8188eu/core/rtw_recv.c
> index 91a6e0f035f4..a3f71697f6d7 100644
> --- a/drivers/staging/r8188eu/core/rtw_recv.c
> +++ b/drivers/staging/r8188eu/core/rtw_recv.c
> @@ -877,7 +877,7 @@ static void validate_recv_ctrl_frame(struct adapter *padapter,
>  			if (psta->sleepq_len == 0) {
>  				pstapriv->tim_bitmap &= ~BIT(psta->aid);
>
> -				/* upate BCN for TIM IE */
> +				/* update BCN for TIM IE */
>  				/* update_BCNTIM(padapter); */
>  				update_beacon(padapter, _TIM_IE_, NULL, false);
>  			}
> @@ -891,7 +891,7 @@ static void validate_recv_ctrl_frame(struct adapter *padapter,
>
>  				pstapriv->tim_bitmap &= ~BIT(psta->aid);
>
> -				/* upate BCN for TIM IE */
> +				/* update BCN for TIM IE */
>  				/* update_BCNTIM(padapter); */
>  				update_beacon(padapter, _TIM_IE_, NULL, false);
>  			}
> @@ -1810,13 +1810,13 @@ void rtw_signal_stat_timer_hdl(struct timer_list *t)
>  	} else {
>  		if (recvpriv->signal_strength_data.update_req == 0) {/*  update_req is clear, means we got rx */
>  			avg_signal_strength = recvpriv->signal_strength_data.avg_val;
> -			/*  after avg_vals are accquired, we can re-stat the signal values */
> +			/*  after avg_vals are acquired, we can re-stat the signal values */
>  			recvpriv->signal_strength_data.update_req = 1;
>  		}
>
>  		if (recvpriv->signal_qual_data.update_req == 0) {/*  update_req is clear, means we got rx */
>  			avg_signal_qual = recvpriv->signal_qual_data.avg_val;
> -			/*  after avg_vals are accquired, we can re-stat the signal values */
> +			/*  after avg_vals are acquired, we can re-stat the signal values */
>  			recvpriv->signal_qual_data.update_req = 1;
>  		}
>
> diff --git a/drivers/staging/r8188eu/core/rtw_xmit.c b/drivers/staging/r8188eu/core/rtw_xmit.c
> index 029b994e1b71..2a686b5c65b1 100644
> --- a/drivers/staging/r8188eu/core/rtw_xmit.c
> +++ b/drivers/staging/r8188eu/core/rtw_xmit.c
> @@ -958,7 +958,7 @@ s32 rtw_xmitframe_coalesce(struct adapter *padapter, struct sk_buff *pkt, struct
>  		}
>
>  		if (bmcst) {
> -			/*  don't do fragment to broadcat/multicast packets */
> +			/*  don't do fragment to broadcast/multicast packets */
>  			mem_sz = _rtw_pktfile_read(&pktfile, pframe, pattrib->pktlen);
>  		} else {
>  			mem_sz = _rtw_pktfile_read(&pktfile, pframe, mpdu_len);
> @@ -1768,7 +1768,7 @@ int xmitframe_enqueue_for_sleeping_sta(struct adapter *padapter, struct xmit_fra
>  			pstapriv->tim_bitmap |= BIT(0);/*  */
>  			pstapriv->sta_dz_bitmap |= BIT(0);
>
> -			update_beacon(padapter, _TIM_IE_, NULL, false);/* tx bc/mc packets after upate bcn */
> +			update_beacon(padapter, _TIM_IE_, NULL, false);/* tx bc/mc packets after update bcn */
>
>  			ret = true;
>  		}
> @@ -1818,7 +1818,7 @@ int xmitframe_enqueue_for_sleeping_sta(struct adapter *padapter, struct xmit_fra
>  				pstapriv->tim_bitmap |= BIT(psta->aid);
>
>  				if (psta->sleepq_len == 1) {
> -					/* upate BCN for TIM IE */
> +					/* update BCN for TIM IE */
>  					update_beacon(padapter, _TIM_IE_, NULL, false);
>  				}
>  			}
> @@ -2087,7 +2087,7 @@ void xmit_delivery_enabled_frames(struct adapter *padapter, struct sta_info *pst
>  		if ((psta->sleepq_ac_len == 0) && (!psta->has_legacy_ac) && (wmmps_ac)) {
>  			pstapriv->tim_bitmap &= ~BIT(psta->aid);
>
> -			/* upate BCN for TIM IE */
> +			/* update BCN for TIM IE */
>  			update_beacon(padapter, _TIM_IE_, NULL, false);
>  		}
>  	}
> --
> 2.17.1
>
>
>

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH v2] staging: r8188eu: correct multiple misspellings in the source driver
  2022-04-13  6:14 ` Julia Lawall
@ 2022-04-13  6:58   ` MAHAK GUPTA
  0 siblings, 0 replies; 3+ messages in thread
From: MAHAK GUPTA @ 2022-04-13  6:58 UTC (permalink / raw)
  To: Julia Lawall
  Cc: Larry Finger, Phillip Potter, gregkh, linux-staging,
	linux-kernel, outreachy

On Wed, Apr 13, 2022 at 11:44 AM Julia Lawall <julia.lawall@inria.fr> wrote:
>
> When you send a change to a patch, the version number has to increase.
> Greg will take the patch with the largest version.  He wants there to be
> only one.
I mentioned patch v2 in the subject. Do I need to do anything else too?
>
> In the source driver is not any more useful than in r8188eu.  Just drop
> that part.
Will do that in v3.
>
> On Wed, 13 Apr 2022, Mahak Gupta wrote:
>
> > Fix multiple spelling errors reported by checkpatch.
>
> Here you could say that all the errors are in comments.  That would remove
> any concern that the behavior of the code is changed.
Will do that in v3.
>
> julia
>
> > Signed-off-by: Mahak Gupta <mahak_g@cs.iitr.ac.in>
> > ---
> > v1 -> v2: Updated the subject and description of the patch
> > ---
> >  drivers/staging/r8188eu/core/rtw_ioctl_set.c |  2 +-
> >  drivers/staging/r8188eu/core/rtw_mlme.c      | 10 +++---
> >  drivers/staging/r8188eu/core/rtw_mlme_ext.c  | 36 ++++++++++----------
> >  drivers/staging/r8188eu/core/rtw_recv.c      |  8 ++---
> >  drivers/staging/r8188eu/core/rtw_xmit.c      |  8 ++---
> >  5 files changed, 32 insertions(+), 32 deletions(-)
> >
> > diff --git a/drivers/staging/r8188eu/core/rtw_ioctl_set.c b/drivers/staging/r8188eu/core/rtw_ioctl_set.c
> > index 4b78e42d180d..9df6fb122bc5 100644
> > --- a/drivers/staging/r8188eu/core/rtw_ioctl_set.c
> > +++ b/drivers/staging/r8188eu/core/rtw_ioctl_set.c
> > @@ -290,7 +290,7 @@ u8 rtw_set_802_11_infrastructure_mode(struct adapter *padapter,
> >
> >               if ((*pold_state == Ndis802_11Infrastructure) || (*pold_state == Ndis802_11IBSS)) {
> >                       if (check_fwstate(pmlmepriv, _FW_LINKED))
> > -                             rtw_indicate_disconnect(padapter); /* will clr Linked_state; before this function, we must have chked whether  issue dis-assoc_cmd or not */
> > +                             rtw_indicate_disconnect(padapter); /* will clr Linked_state; before this function, we must have checked whether  issue dis-assoc_cmd or not */
> >              }
> >
> >               *pold_state = networktype;
> > diff --git a/drivers/staging/r8188eu/core/rtw_mlme.c b/drivers/staging/r8188eu/core/rtw_mlme.c
> > index c90f36dee1ea..a2b42779bc87 100644
> > --- a/drivers/staging/r8188eu/core/rtw_mlme.c
> > +++ b/drivers/staging/r8188eu/core/rtw_mlme.c
> > @@ -193,7 +193,7 @@ void _rtw_free_network_nolock(struct      mlme_priv *pmlmepriv, struct wlan_network *
> >  /*
> >       return the wlan_network with the matching addr
> >
> > -     Shall be calle under atomic context... to avoid possible racing condition...
> > +     Shall be called under atomic context... to avoid possible racing condition...
> >  */
> >  struct wlan_network *_rtw_find_network(struct __queue *scanned_queue, u8 *addr)
> >  {
> > @@ -329,7 +329,7 @@ void rtw_free_network_queue(struct adapter *dev, u8 isfreeall)
> >  /*
> >       return the wlan_network with the matching addr
> >
> > -     Shall be calle under atomic context... to avoid possible racing condition...
> > +     Shall be called under atomic context... to avoid possible racing condition...
> >  */
> >  struct       wlan_network *rtw_find_network(struct __queue *scanned_queue, u8 *addr)
> >  {
> > @@ -912,7 +912,7 @@ static struct sta_info *rtw_joinbss_update_stainfo(struct adapter *padapter, str
> >               }
> >               /*      Commented by Albert 2012/07/21 */
> >               /*      When doing the WPS, the wps_ie_len won't equal to 0 */
> > -             /*      And the Wi-Fi driver shouldn't allow the data packet to be tramsmitted. */
> > +             /*      And the Wi-Fi driver shouldn't allow the data packet to be transmitted. */
> >               if (padapter->securitypriv.wps_ie_len != 0) {
> >                       psta->ieee8021x_blocked = true;
> >                       padapter->securitypriv.wps_ie_len = 0;
> > @@ -1304,7 +1304,7 @@ void rtw_stadel_event_callback(struct adapter *adapter, u8 *pbuf)
> >  }
> >
> >  /*
> > -* _rtw_join_timeout_handler - Timeout/faliure handler for CMD JoinBss
> > +* _rtw_join_timeout_handler - Timeout/failure handler for CMD JoinBss
> >  * @adapter: pointer to struct adapter structure
> >  */
> >  void _rtw_join_timeout_handler (struct adapter *adapter)
> > @@ -1339,7 +1339,7 @@ void _rtw_join_timeout_handler (struct adapter *adapter)
> >  }
> >
> >  /*
> > -* rtw_scan_timeout_handler - Timeout/Faliure handler for CMD SiteSurvey
> > +* rtw_scan_timeout_handler - Timeout/Failure handler for CMD SiteSurvey
> >  * @adapter: pointer to struct adapter structure
> >  */
> >  void rtw_scan_timeout_handler (struct adapter *adapter)
> > diff --git a/drivers/staging/r8188eu/core/rtw_mlme_ext.c b/drivers/staging/r8188eu/core/rtw_mlme_ext.c
> > index 474391bf7cb5..fd445aa09377 100644
> > --- a/drivers/staging/r8188eu/core/rtw_mlme_ext.c
> > +++ b/drivers/staging/r8188eu/core/rtw_mlme_ext.c
> > @@ -156,7 +156,7 @@ static struct rt_channel_plan_map RTW_ChannelPlanMap[RT_CHANNEL_DOMAIN_MAX] = {
> >       {0x03}, /* 0x41, RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN_2G */
> >  };
> >
> > -static struct rt_channel_plan_map RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE = {0x03}; /* use the conbination for max channel numbers */
> > +static struct rt_channel_plan_map RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE = {0x03}; /* use the combination for max channel numbers */
> >
> >  /*
> >   * Search the @param channel_num in given @param channel_set
> > @@ -1733,7 +1733,7 @@ void issue_p2p_GO_request(struct adapter *padapter, u8 *raddr)
> >       p2pie[p2pielen++] = 0x09;       /*      WFA P2P v1.0 */
> >
> >       /*      Commented by Albert 20110306 */
> > -     /*      According to the P2P Specification, the group negoitation request frame should contain 9 P2P attributes */
> > +     /*      According to the P2P Specification, the group negotiation request frame should contain 9 P2P attributes */
> >       /*      1. P2P Capability */
> >       /*      2. Group Owner Intent */
> >       /*      3. Configuration Timeout */
> > @@ -2088,7 +2088,7 @@ static void issue_p2p_GO_response(struct adapter *padapter, u8 *raddr, u8 *frame
> >       p2pie[p2pielen++] = 0x09;       /*      WFA P2P v1.0 */
> >
> >       /*      Commented by Albert 20100908 */
> > -     /*      According to the P2P Specification, the group negoitation response frame should contain 9 P2P attributes */
> > +     /*      According to the P2P Specification, the group negotiation response frame should contain 9 P2P attributes */
> >       /*      1. Status */
> >       /*      2. P2P Capability */
> >       /*      3. Group Owner Intent */
> > @@ -2384,7 +2384,7 @@ static void issue_p2p_GO_confirm(struct adapter *padapter, u8 *raddr, u8 result)
> >       p2pie[p2pielen++] = 0x09;       /*      WFA P2P v1.0 */
> >
> >       /*      Commented by Albert 20110306 */
> > -     /*      According to the P2P Specification, the group negoitation request frame should contain 5 P2P attributes */
> > +     /*      According to the P2P Specification, the group negotiation request frame should contain 5 P2P attributes */
> >       /*      1. Status */
> >       /*      2. P2P Capability */
> >       /*      3. Operating Channel */
> > @@ -4009,7 +4009,7 @@ struct xmit_frame *alloc_mgtxmitframe(struct xmit_priv *pxmitpriv)
> >
> >  /****************************************************************************
> >
> > -Following are some TX fuctions for WiFi MLME
> > +Following are some TX functions for WiFi MLME
> >
> >  *****************************************************************************/
> >
> > @@ -4611,7 +4611,7 @@ int issue_probereq_ex(struct adapter *padapter, struct ndis_802_11_ssid *pssid,
> >       return ret;
> >  }
> >
> > -/*  if psta == NULL, indiate we are station(client) now... */
> > +/*  if psta == NULL, indicate we are station(client) now... */
> >  void issue_auth(struct adapter *padapter, struct sta_info *psta, unsigned short status)
> >  {
> >       struct xmit_frame *pmgntframe;
> > @@ -5010,7 +5010,7 @@ void issue_assocreq(struct adapter *padapter)
> >                               if (!padapter->registrypriv.wifi_spec) {
> >                                       /* Commented by Kurt 20110629 */
> >                                       /* In some older APs, WPS handshake */
> > -                                     /* would be fail if we append vender extensions informations to AP */
> > +                                     /* would be fail if we append vender extensions information to AP */
> >                                       if (!memcmp(pIE->data, WPS_OUI, 4))
> >                                               pIE->Length = 14;
> >                               }
> > @@ -5165,7 +5165,7 @@ void issue_assocreq(struct adapter *padapter)
> >               kfree(pmlmepriv->assoc_req);
> >  }
> >
> > -/* when wait_ack is ture, this function shoule be called at process context */
> > +/* when wait_ack is true, this function should be called at process context */
> >  static int _issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned int power_mode, int wait_ack)
> >  {
> >       int ret = _FAIL;
> > @@ -5234,7 +5234,7 @@ static int _issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned
> >       return ret;
> >  }
> >
> > -/* when wait_ms > 0 , this function shoule be called at process context */
> > +/* when wait_ms > 0 , this function should be called at process context */
> >  /* da == NULL for station mode */
> >  int issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned int power_mode, int try_cnt, int wait_ms)
> >  {
> > @@ -5243,7 +5243,7 @@ int issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned int pow
> >       struct mlme_ext_priv    *pmlmeext = &padapter->mlmeextpriv;
> >       struct mlme_ext_info    *pmlmeinfo = &pmlmeext->mlmext_info;
> >
> > -     /* da == NULL, assum it's null data for sta to ap*/
> > +     /* da == NULL, assume it's null data for sta to ap*/
> >       if (!da)
> >               da = get_my_bssid(&pmlmeinfo->network);
> >
> > @@ -5267,7 +5267,7 @@ int issue_nulldata(struct adapter *padapter, unsigned char *da, unsigned int pow
> >       return ret;
> >  }
> >
> > -/* when wait_ack is ture, this function shoule be called at process context */
> > +/* when wait_ack is true, this function should be called at process context */
> >  static int _issue_qos_nulldata(struct adapter *padapter, unsigned char *da, u16 tid, int wait_ack)
> >  {
> >       int ret = _FAIL;
> > @@ -5340,7 +5340,7 @@ static int _issue_qos_nulldata(struct adapter *padapter, unsigned char *da, u16
> >       return ret;
> >  }
> >
> > -/* when wait_ms > 0 , this function shoule be called at process context */
> > +/* when wait_ms > 0 , this function should be called at process context */
> >  /* da == NULL for station mode */
> >  int issue_qos_nulldata(struct adapter *padapter, unsigned char *da, u16 tid, int try_cnt, int wait_ms)
> >  {
> > @@ -5349,7 +5349,7 @@ int issue_qos_nulldata(struct adapter *padapter, unsigned char *da, u16 tid, int
> >       struct mlme_ext_priv    *pmlmeext = &padapter->mlmeextpriv;
> >       struct mlme_ext_info    *pmlmeinfo = &pmlmeext->mlmext_info;
> >
> > -     /* da == NULL, assum it's null data for sta to ap*/
> > +     /* da == NULL, assume it's null data for sta to ap*/
> >       if (!da)
> >               da = get_my_bssid(&pmlmeinfo->network);
> >
> > @@ -5790,7 +5790,7 @@ void clear_beacon_valid_bit(struct adapter *adapter)
> >
> >  /****************************************************************************
> >
> > -Following are some utitity fuctions for WiFi MLME
> > +Following are some utility functions for WiFi MLME
> >
> >  *****************************************************************************/
> >
> > @@ -5888,7 +5888,7 @@ void site_survey(struct adapter *padapter)
> >               } else {
> >                       /*  20100721:Interrupt scan operation here. */
> >                       /*  For SW antenna diversity before link, it needs to switch to another antenna and scan again. */
> > -                     /*  It compares the scan result and select beter one to do connection. */
> > +                     /*  It compares the scan result and select better one to do connection. */
> >                       if (AntDivBeforeLink8188E(padapter)) {
> >                               pmlmeext->sitesurvey_res.bss_cnt = 0;
> >                               pmlmeext->sitesurvey_res.channel_idx = -1;
> > @@ -6109,7 +6109,7 @@ void start_create_ibss(struct adapter *padapter)
> >       /* update wireless mode */
> >       update_wireless_mode(padapter);
> >
> > -     /* udpate capability */
> > +     /* update capability */
> >       caps = rtw_get_capability((struct wlan_bssid_ex *)pnetwork);
> >       update_capinfo(padapter, caps);
> >       if (caps & cap_IBSS) {/* adhoc master */
> > @@ -6160,7 +6160,7 @@ void start_clnt_join(struct adapter *padapter)
> >       /* update wireless mode */
> >       update_wireless_mode(padapter);
> >
> > -     /* udpate capability */
> > +     /* update capability */
> >       caps = rtw_get_capability((struct wlan_bssid_ex *)pnetwork);
> >       update_capinfo(padapter, caps);
> >       if (caps & cap_ESS) {
> > @@ -6740,7 +6740,7 @@ void mlmeext_joinbss_event_callback(struct adapter *padapter, int join_res)
> >       /* BCN interval */
> >       rtw_write16(padapter, REG_BCN_INTERVAL, pmlmeinfo->bcn_interval);
> >
> > -     /* udpate capability */
> > +     /* update capability */
> >       update_capinfo(padapter, pmlmeinfo->capability);
> >
> >       /* WMM, Update EDCA param */
> > diff --git a/drivers/staging/r8188eu/core/rtw_recv.c b/drivers/staging/r8188eu/core/rtw_recv.c
> > index 91a6e0f035f4..a3f71697f6d7 100644
> > --- a/drivers/staging/r8188eu/core/rtw_recv.c
> > +++ b/drivers/staging/r8188eu/core/rtw_recv.c
> > @@ -877,7 +877,7 @@ static void validate_recv_ctrl_frame(struct adapter *padapter,
> >                       if (psta->sleepq_len == 0) {
> >                               pstapriv->tim_bitmap &= ~BIT(psta->aid);
> >
> > -                             /* upate BCN for TIM IE */
> > +                             /* update BCN for TIM IE */
> >                               /* update_BCNTIM(padapter); */
> >                               update_beacon(padapter, _TIM_IE_, NULL, false);
> >                       }
> > @@ -891,7 +891,7 @@ static void validate_recv_ctrl_frame(struct adapter *padapter,
> >
> >                               pstapriv->tim_bitmap &= ~BIT(psta->aid);
> >
> > -                             /* upate BCN for TIM IE */
> > +                             /* update BCN for TIM IE */
> >                               /* update_BCNTIM(padapter); */
> >                               update_beacon(padapter, _TIM_IE_, NULL, false);
> >                       }
> > @@ -1810,13 +1810,13 @@ void rtw_signal_stat_timer_hdl(struct timer_list *t)
> >       } else {
> >               if (recvpriv->signal_strength_data.update_req == 0) {/*  update_req is clear, means we got rx */
> >                       avg_signal_strength = recvpriv->signal_strength_data.avg_val;
> > -                     /*  after avg_vals are accquired, we can re-stat the signal values */
> > +                     /*  after avg_vals are acquired, we can re-stat the signal values */
> >                       recvpriv->signal_strength_data.update_req = 1;
> >               }
> >
> >               if (recvpriv->signal_qual_data.update_req == 0) {/*  update_req is clear, means we got rx */
> >                       avg_signal_qual = recvpriv->signal_qual_data.avg_val;
> > -                     /*  after avg_vals are accquired, we can re-stat the signal values */
> > +                     /*  after avg_vals are acquired, we can re-stat the signal values */
> >                       recvpriv->signal_qual_data.update_req = 1;
> >               }
> >
> > diff --git a/drivers/staging/r8188eu/core/rtw_xmit.c b/drivers/staging/r8188eu/core/rtw_xmit.c
> > index 029b994e1b71..2a686b5c65b1 100644
> > --- a/drivers/staging/r8188eu/core/rtw_xmit.c
> > +++ b/drivers/staging/r8188eu/core/rtw_xmit.c
> > @@ -958,7 +958,7 @@ s32 rtw_xmitframe_coalesce(struct adapter *padapter, struct sk_buff *pkt, struct
> >               }
> >
> >               if (bmcst) {
> > -                     /*  don't do fragment to broadcat/multicast packets */
> > +                     /*  don't do fragment to broadcast/multicast packets */
> >                       mem_sz = _rtw_pktfile_read(&pktfile, pframe, pattrib->pktlen);
> >               } else {
> >                       mem_sz = _rtw_pktfile_read(&pktfile, pframe, mpdu_len);
> > @@ -1768,7 +1768,7 @@ int xmitframe_enqueue_for_sleeping_sta(struct adapter *padapter, struct xmit_fra
> >                       pstapriv->tim_bitmap |= BIT(0);/*  */
> >                       pstapriv->sta_dz_bitmap |= BIT(0);
> >
> > -                     update_beacon(padapter, _TIM_IE_, NULL, false);/* tx bc/mc packets after upate bcn */
> > +                     update_beacon(padapter, _TIM_IE_, NULL, false);/* tx bc/mc packets after update bcn */
> >
> >                       ret = true;
> >               }
> > @@ -1818,7 +1818,7 @@ int xmitframe_enqueue_for_sleeping_sta(struct adapter *padapter, struct xmit_fra
> >                               pstapriv->tim_bitmap |= BIT(psta->aid);
> >
> >                               if (psta->sleepq_len == 1) {
> > -                                     /* upate BCN for TIM IE */
> > +                                     /* update BCN for TIM IE */
> >                                       update_beacon(padapter, _TIM_IE_, NULL, false);
> >                               }
> >                       }
> > @@ -2087,7 +2087,7 @@ void xmit_delivery_enabled_frames(struct adapter *padapter, struct sta_info *pst
> >               if ((psta->sleepq_ac_len == 0) && (!psta->has_legacy_ac) && (wmmps_ac)) {
> >                       pstapriv->tim_bitmap &= ~BIT(psta->aid);
> >
> > -                     /* upate BCN for TIM IE */
> > +                     /* update BCN for TIM IE */
> >                       update_beacon(padapter, _TIM_IE_, NULL, false);
> >               }
> >       }
> > --
> > 2.17.1
> >
> >
> >
>

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2022-04-13 12:28 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-04-12 21:54 [PATCH v2] staging: r8188eu: correct multiple misspellings in the source driver Mahak Gupta
2022-04-13  6:14 ` Julia Lawall
2022-04-13  6:58   ` MAHAK GUPTA

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.