All of lore.kernel.org
 help / color / mirror / Atom feed
From: cgel.zte@gmail.com
To: grygorii.strashko@ti.com
Cc: davem@davemloft.net, kuba@kernel.org, linux-omap@vger.kernel.org,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	Minghao Chi <chi.minghao@zte.com.cn>,
	Zeal Robot <zealci@zte.com.cn>
Subject: [PATCH] net: ethernet: ti: cpsw_new: use pm_runtime_resume_and_get() instead of pm_runtime_get_sync()
Date: Wed, 13 Apr 2022 09:35:29 +0000	[thread overview]
Message-ID: <20220413093529.2538378-1-chi.minghao@zte.com.cn> (raw)

From: Minghao Chi <chi.minghao@zte.com.cn>

Using pm_runtime_resume_and_get is more appropriate
for simplifing code

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
---
 drivers/net/ethernet/ti/cpsw_new.c | 33 ++++++++++--------------------
 1 file changed, 11 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw_new.c b/drivers/net/ethernet/ti/cpsw_new.c
index bd4b1528cf99..13e54b05953c 100644
--- a/drivers/net/ethernet/ti/cpsw_new.c
+++ b/drivers/net/ethernet/ti/cpsw_new.c
@@ -449,11 +449,9 @@ static int cpsw_ndo_vlan_rx_add_vid(struct net_device *ndev,
 	if (vid == cpsw->data.default_vlan)
 		return 0;
 
-	ret = pm_runtime_get_sync(cpsw->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(cpsw->dev);
+	ret = pm_runtime_resume_and_get(cpsw->dev);
+	if (ret < 0)
 		return ret;
-	}
 
 	/* In dual EMAC, reserved VLAN id should not be used for
 	 * creating VLAN interfaces as this can break the dual
@@ -829,11 +827,9 @@ static int cpsw_ndo_open(struct net_device *ndev)
 
 	dev_info(priv->dev, "starting ndev. mode: %s\n",
 		 cpsw_is_switch_en(cpsw) ? "switch" : "dual_mac");
-	ret = pm_runtime_get_sync(cpsw->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(cpsw->dev);
+	ret = pm_runtime_resume_and_get(cpsw->dev);
+	if (ret < 0)
 		return ret;
-	}
 
 	/* Notify the stack of the actual queue counts. */
 	ret = netif_set_real_num_tx_queues(ndev, cpsw->tx_ch_num);
@@ -985,11 +981,9 @@ static int cpsw_ndo_set_mac_address(struct net_device *ndev, void *p)
 	if (!is_valid_ether_addr(addr->sa_data))
 		return -EADDRNOTAVAIL;
 
-	ret = pm_runtime_get_sync(cpsw->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(cpsw->dev);
+	ret = pm_runtime_resume_and_get(cpsw->dev);
+	if (ret < 0)
 		return ret;
-	}
 
 	vid = cpsw->slaves[slave_no].port_vlan;
 	flags = ALE_VLAN | ALE_SECURE;
@@ -1024,11 +1018,9 @@ static int cpsw_ndo_vlan_rx_kill_vid(struct net_device *ndev,
 	if (vid == cpsw->data.default_vlan)
 		return 0;
 
-	ret = pm_runtime_get_sync(cpsw->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(cpsw->dev);
+	ret = pm_runtime_resume_and_get(cpsw->dev);
+	if (ret < 0)
 		return ret;
-	}
 
 	/* reset the return code as pm_runtime_get_sync() can return
 	 * non zero values as well.
@@ -1918,9 +1910,8 @@ static int cpsw_probe(struct platform_device *pdev)
 	/* Need to enable clocks with runtime PM api to access module
 	 * registers
 	 */
-	ret = pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0) {
-		pm_runtime_put_noidle(dev);
 		pm_runtime_disable(dev);
 		return ret;
 	}
@@ -2045,11 +2036,9 @@ static int cpsw_remove(struct platform_device *pdev)
 	struct cpsw_common *cpsw = platform_get_drvdata(pdev);
 	int ret;
 
-	ret = pm_runtime_get_sync(&pdev->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(&pdev->dev);
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret < 0)
 		return ret;
-	}
 
 	cpsw_unregister_notifiers(cpsw);
 	cpsw_unregister_devlink(cpsw);
-- 
2.25.1



             reply	other threads:[~2022-04-13  9:35 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-13  9:35 cgel.zte [this message]
2022-04-15 10:20 ` [PATCH] net: ethernet: ti: cpsw_new: use pm_runtime_resume_and_get() instead of pm_runtime_get_sync() patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220413093529.2538378-1-chi.minghao@zte.com.cn \
    --to=cgel.zte@gmail.com \
    --cc=chi.minghao@zte.com.cn \
    --cc=davem@davemloft.net \
    --cc=grygorii.strashko@ti.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=zealci@zte.com.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.