[PATCH v3 0/2] soc: ti: wkup_m3_ipc: Add support for IO Isolation

From: Drew Fustini <dfustini@baylibre.com>
To: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Nishanth Menon <nm@ti.com>,
	Santosh Shilimkar <ssantosh@kernel.org>,
	Dave Gerlach <d-gerlach@ti.com>, Tony Lindgren <tony@atomide.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Drew Fustini <dfustini@baylibre.com>
Subject: [PATCH v3 0/2] soc: ti: wkup_m3_ipc: Add support for IO Isolation
Date: Thu, 14 Apr 2022 12:27:22 -0700	[thread overview]
Message-ID: <20220414192722.2978837-1-dfustini@baylibre.com> (raw)

TI AM437x SoCs support isolation of the IOs so that control is taken
from the peripheral they are connected to and overridden by values
present in the control register for that pad. This series documents a
new property 'ti,set-io-isolation' and updates the wkup_m3_ipc driver to
inform the CM3 firmware when that property is set.

A prerequisite for this series is:
[PATCH v2 0/2] soc: ti: wkup_m3_ipc: support vtt toggle
https://lore.kernel.org/lkml/20220409211215.2529387-1-dfustini@baylibre.com/T/

Changes from v2:
- correct indentation of the 'allOf:' block in binding patch

Changes from v1:
- correct typo of 'ti,set-io-isolation' property
- make 'ti,set-io-isolation' only valid for 'ti,am4372-wkup-m3-ipc'

Dave Gerlach (1):
  soc: ti: wkup_m3_ipc: Add support for IO Isolation

Drew Fustini (1):
  dt-bindings: wkup-m3-ipc: Add ti,set-io-isolation property

 .../bindings/soc/ti/wkup-m3-ipc.yaml          | 78 +++++++++++++++++--
 drivers/soc/ti/wkup_m3_ipc.c                  | 14 +++-
 include/linux/wkup_m3_ipc.h                   |  1 +
 3 files changed, 86 insertions(+), 7 deletions(-)

-- 
2.32.0