[PATCH AUTOSEL 4.9 1/7] drm/amdkfd: Check for potential null return of kmalloc_array()

[PATCH AUTOSEL 4.9 1/7] drm/amdkfd: Check for potential null return of kmalloc_array()

[Sasha Levin]

From: QintaoShen <unSimple1993@163.com>

[ Upstream commit ebbb7bb9e80305820dc2328a371c1b35679f2667 ]

As the kmalloc_array() may return null, the 'event_waiters[i].wait' would lead to null-pointer dereference.
Therefore, it is better to check the return value of kmalloc_array() to avoid this confusion.

Signed-off-by: QintaoShen <unSimple1993@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_events.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_events.c b/drivers/gpu/drm/amd/amdkfd/kfd_events.c
index 6a3470f84998..732713ff3190 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_events.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_events.c
@@ -607,6 +607,8 @@ static struct kfd_event_waiter *alloc_event_waiters(uint32_t num_events)
 	event_waiters = kmalloc_array(num_events,
 					sizeof(struct kfd_event_waiter),
 					GFP_KERNEL);
+	if (!event_waiters)
+		return NULL;
 
 	for (i = 0; (event_waiters) && (i < num_events) ; i++) {
 		INIT_LIST_HEAD(&event_waiters[i].waiters);
-- 
2.35.1

[PATCH AUTOSEL 4.9 1/7] drm/amdkfd: Check for potential null return of kmalloc_array()

[Sasha Levin]

From: QintaoShen <unSimple1993@163.com>

[ Upstream commit ebbb7bb9e80305820dc2328a371c1b35679f2667 ]

As the kmalloc_array() may return null, the 'event_waiters[i].wait' would lead to null-pointer dereference.
Therefore, it is better to check the return value of kmalloc_array() to avoid this confusion.

Signed-off-by: QintaoShen <unSimple1993@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_events.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_events.c b/drivers/gpu/drm/amd/amdkfd/kfd_events.c
index 6a3470f84998..732713ff3190 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_events.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_events.c
@@ -607,6 +607,8 @@ static struct kfd_event_waiter *alloc_event_waiters(uint32_t num_events)
 	event_waiters = kmalloc_array(num_events,
 					sizeof(struct kfd_event_waiter),
 					GFP_KERNEL);
+	if (!event_waiters)
+		return NULL;
 
 	for (i = 0; (event_waiters) && (i < num_events) ; i++) {
 		INIT_LIST_HEAD(&event_waiters[i].waiters);
-- 
2.35.1

[PATCH AUTOSEL 4.9 1/7] drm/amdkfd: Check for potential null return of kmalloc_array()

[Sasha Levin]

From: QintaoShen <unSimple1993@163.com>

[ Upstream commit ebbb7bb9e80305820dc2328a371c1b35679f2667 ]

As the kmalloc_array() may return null, the 'event_waiters[i].wait' would lead to null-pointer dereference.
Therefore, it is better to check the return value of kmalloc_array() to avoid this confusion.

Signed-off-by: QintaoShen <unSimple1993@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_events.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_events.c b/drivers/gpu/drm/amd/amdkfd/kfd_events.c
index 6a3470f84998..732713ff3190 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_events.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_events.c
@@ -607,6 +607,8 @@ static struct kfd_event_waiter *alloc_event_waiters(uint32_t num_events)
 	event_waiters = kmalloc_array(num_events,
 					sizeof(struct kfd_event_waiter),
 					GFP_KERNEL);
+	if (!event_waiters)
+		return NULL;
 
 	for (i = 0; (event_waiters) && (i < num_events) ; i++) {
 		INIT_LIST_HEAD(&event_waiters[i].waiters);
-- 
2.35.1

[PATCH AUTOSEL 4.9 2/7] scsi: lpfc: Fix queue failures when recovering from PCI parity error

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit df0101197c4d9596682901631f3ee193ed354873 ]

When recovering from a pci-parity error the driver is failing to re-create
queues, causing recovery to fail. Looking deeper, it was found that the
interrupt vector count allocated on the recovery was fewer than the vectors
originally allocated. This disparity resulted in CPU map entries with stale
information. When the driver tries to re-create the queues, it attempts to
use the stale information which indicates an eq/interrupt vector that was
no longer created.

Fix by clearng the cpup map array before enabling and requesting the IRQs
in the lpfc_sli_reset_slot_s4 routine().

Link: https://lore.kernel.org/r/20220317032737.45308-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_init.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 8c640bcf107b..985f733719d7 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -10921,6 +10921,8 @@ lpfc_io_slot_reset_s4(struct pci_dev *pdev)
 	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
 	spin_unlock_irq(&phba->hbalock);
 
+	/* Init cpu_map array */
+	lpfc_cpu_map_array_init(phba);
 	/* Configure and enable interrupt */
 	intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode);
 	if (intr_mode == LPFC_INTR_ERROR) {
-- 
2.35.1

[PATCH AUTOSEL 4.9 3/7] scsi: ibmvscsis: Increase INITIAL_SRP_LIMIT to 1024

[Sasha Levin]

From: Tyrel Datwyler <tyreld@linux.ibm.com>

[ Upstream commit 0bade8e53279157c7cc9dd95d573b7e82223d78a ]

The adapter request_limit is hardcoded to be INITIAL_SRP_LIMIT which is
currently an arbitrary value of 800. Increase this value to 1024 which
better matches the characteristics of the typical IBMi Initiator that
supports 32 LUNs and a queue depth of 32.

This change also has the secondary benefit of being a power of two as
required by the kfifo API. Since, Commit ab9bb6318b09 ("Partially revert
"kfifo: fix kfifo_alloc() and kfifo_init()"") the size of IU pool for each
target has been rounded down to 512 when attempting to kfifo_init() those
pools with the current request_limit size of 800.

Link: https://lore.kernel.org/r/20220322194443.678433-1-tyreld@linux.ibm.com
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c
index 5ed28111c3c3..569b662e19e7 100644
--- a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c
+++ b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c
@@ -43,7 +43,7 @@
 
 #define IBMVSCSIS_VERSION	"v0.2"
 
-#define	INITIAL_SRP_LIMIT	800
+#define	INITIAL_SRP_LIMIT	1024
 #define	DEFAULT_MAX_SECTORS	256
 #define MAX_TXU			1024 * 1024
 
-- 
2.35.1

[PATCH AUTOSEL 4.9 4/7] net: micrel: fix KS8851_MLL Kconfig

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit c3efcedd272aa6dd5929e20cf902a52ddaa1197a ]

KS8851_MLL selects MICREL_PHY, which depends on PTP_1588_CLOCK_OPTIONAL,
so make KS8851_MLL also depend on PTP_1588_CLOCK_OPTIONAL since
'select' does not follow any dependency chains.

Fixes kconfig warning and build errors:

WARNING: unmet direct dependencies detected for MICREL_PHY
  Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m]
  Selected by [y]:
  - KS8851_MLL [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICREL [=y] && HAS_IOMEM [=y]

ld: drivers/net/phy/micrel.o: in function `lan8814_ts_info':
micrel.c:(.text+0xb35): undefined reference to `ptp_clock_index'
ld: drivers/net/phy/micrel.o: in function `lan8814_probe':
micrel.c:(.text+0x2586): undefined reference to `ptp_clock_register'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/micrel/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/micrel/Kconfig b/drivers/net/ethernet/micrel/Kconfig
index b7e2f49696b7..aa12bace8673 100644
--- a/drivers/net/ethernet/micrel/Kconfig
+++ b/drivers/net/ethernet/micrel/Kconfig
@@ -45,6 +45,7 @@ config KS8851
 config KS8851_MLL
 	tristate "Micrel KS8851 MLL"
 	depends on HAS_IOMEM
+	depends on PTP_1588_CLOCK_OPTIONAL
 	select MII
 	---help---
 	  This platform driver is for Micrel KS8851 Address/data bus
-- 
2.35.1

[PATCH AUTOSEL 4.9 5/7] gpu: ipu-v3: Fix dev_dbg frequency output

[Sasha Levin]

From: Leo Ruan <tingquan.ruan@cn.bosch.com>

[ Upstream commit 070a88fd4a03f921b73a2059e97d55faaa447dab ]

This commit corrects the printing of the IPU clock error percentage if
it is between -0.1% to -0.9%. For example, if the pixel clock requested
is 27.2 MHz but only 27.0 MHz can be achieved the deviation is -0.8%.
But the fixed point math had a flaw and calculated error of 0.2%.

Before:
  Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz
  IPU clock can give 27000000 with divider 10, error 0.2%
  Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz

After:
  Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz
  IPU clock can give 27000000 with divider 10, error -0.8%
  Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz

Signed-off-by: Leo Ruan <tingquan.ruan@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220207151411.5009-1-mark.jonas@de.bosch.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/ipu-v3/ipu-di.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/ipu-v3/ipu-di.c b/drivers/gpu/ipu-v3/ipu-di.c
index a8d87ddd8a17..dc0511b22600 100644
--- a/drivers/gpu/ipu-v3/ipu-di.c
+++ b/drivers/gpu/ipu-v3/ipu-di.c
@@ -460,8 +460,9 @@ static void ipu_di_config_clock(struct ipu_di *di,
 
 		error = rate / (sig->mode.pixelclock / 1000);
 
-		dev_dbg(di->ipu->dev, "  IPU clock can give %lu with divider %u, error %d.%u%%\n",
-			rate, div, (signed)(error - 1000) / 10, error % 10);
+		dev_dbg(di->ipu->dev, "  IPU clock can give %lu with divider %u, error %c%d.%d%%\n",
+			rate, div, error < 1000 ? '-' : '+',
+			abs(error - 1000) / 10, abs(error - 1000) % 10);
 
 		/* Allow a 1% error */
 		if (error < 1010 && error >= 990) {
-- 
2.35.1

[PATCH AUTOSEL 4.9 5/7] gpu: ipu-v3: Fix dev_dbg frequency output

[Sasha Levin]

From: Leo Ruan <tingquan.ruan@cn.bosch.com>

[ Upstream commit 070a88fd4a03f921b73a2059e97d55faaa447dab ]

This commit corrects the printing of the IPU clock error percentage if
it is between -0.1% to -0.9%. For example, if the pixel clock requested
is 27.2 MHz but only 27.0 MHz can be achieved the deviation is -0.8%.
But the fixed point math had a flaw and calculated error of 0.2%.

Before:
  Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz
  IPU clock can give 27000000 with divider 10, error 0.2%
  Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz

After:
  Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz
  IPU clock can give 27000000 with divider 10, error -0.8%
  Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz

Signed-off-by: Leo Ruan <tingquan.ruan@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220207151411.5009-1-mark.jonas@de.bosch.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/ipu-v3/ipu-di.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/ipu-v3/ipu-di.c b/drivers/gpu/ipu-v3/ipu-di.c
index a8d87ddd8a17..dc0511b22600 100644
--- a/drivers/gpu/ipu-v3/ipu-di.c
+++ b/drivers/gpu/ipu-v3/ipu-di.c
@@ -460,8 +460,9 @@ static void ipu_di_config_clock(struct ipu_di *di,
 
 		error = rate / (sig->mode.pixelclock / 1000);
 
-		dev_dbg(di->ipu->dev, "  IPU clock can give %lu with divider %u, error %d.%u%%\n",
-			rate, div, (signed)(error - 1000) / 10, error % 10);
+		dev_dbg(di->ipu->dev, "  IPU clock can give %lu with divider %u, error %c%d.%d%%\n",
+			rate, div, error < 1000 ? '-' : '+',
+			abs(error - 1000) / 10, abs(error - 1000) % 10);
 
 		/* Allow a 1% error */
 		if (error < 1010 && error >= 990) {
-- 
2.35.1

[PATCH AUTOSEL 4.9 6/7] scsi: mvsas: Add PCI ID of RocketRaid 2640

[Sasha Levin]

From: Alexey Galakhov <agalakhov@gmail.com>

[ Upstream commit 5f2bce1e222028dc1c15f130109a17aa654ae6e8 ]

The HighPoint RocketRaid 2640 is a low-cost SAS controller based on Marvell
chip. The chip in question was already supported by the kernel, just the
PCI ID of this particular board was missing.

Link: https://lore.kernel.org/r/20220309212535.402987-1-agalakhov@gmail.com
Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mvsas/mv_init.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 8280046fd1f0..b29542b82c8a 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -679,6 +679,7 @@ static struct pci_device_id mvs_pci_table[] = {
 	{ PCI_VDEVICE(ARECA, PCI_DEVICE_ID_ARECA_1300), chip_1300 },
 	{ PCI_VDEVICE(ARECA, PCI_DEVICE_ID_ARECA_1320), chip_1320 },
 	{ PCI_VDEVICE(ADAPTEC2, 0x0450), chip_6440 },
+	{ PCI_VDEVICE(TTI, 0x2640), chip_6440 },
 	{ PCI_VDEVICE(TTI, 0x2710), chip_9480 },
 	{ PCI_VDEVICE(TTI, 0x2720), chip_9480 },
 	{ PCI_VDEVICE(TTI, 0x2721), chip_9480 },
-- 
2.35.1

[PATCH AUTOSEL 4.9 7/7] drivers: net: slip: fix NPD bug in sl_tx_timeout()

[Sasha Levin]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit ec4eb8a86ade4d22633e1da2a7d85a846b7d1798 ]

When a slip driver is detaching, the slip_close() will act to
cleanup necessary resources and sl->tty is set to NULL in
slip_close(). Meanwhile, the packet we transmit is blocked,
sl_tx_timeout() will be called. Although slip_close() and
sl_tx_timeout() use sl->lock to synchronize, we don`t judge
whether sl->tty equals to NULL in sl_tx_timeout() and the
null pointer dereference bug will happen.

   (Thread 1)                 |      (Thread 2)
                              | slip_close()
                              |   spin_lock_bh(&sl->lock)
                              |   ...
...                           |   sl->tty = NULL //(1)
sl_tx_timeout()               |   spin_unlock_bh(&sl->lock)
  spin_lock(&sl->lock);       |
  ...                         |   ...
  tty_chars_in_buffer(sl->tty)|
    if (tty->ops->..) //(2)   |
    ...                       |   synchronize_rcu()

We set NULL to sl->tty in position (1) and dereference sl->tty
in position (2).

This patch adds check in sl_tx_timeout(). If sl->tty equals to
NULL, sl_tx_timeout() will goto out.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20220405132206.55291-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/slip/slip.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c
index f870396e05e1..ba26fa0ceba8 100644
--- a/drivers/net/slip/slip.c
+++ b/drivers/net/slip/slip.c
@@ -471,7 +471,7 @@ static void sl_tx_timeout(struct net_device *dev)
 	spin_lock(&sl->lock);
 
 	if (netif_queue_stopped(dev)) {
-		if (!netif_running(dev))
+		if (!netif_running(dev) || !sl->tty)
 			goto out;
 
 		/* May be we must check transmitter timeout here ?
-- 
2.35.1

Re: [PATCH AUTOSEL 4.9 2/7] scsi: lpfc: Fix queue failures when recovering from PCI parity error

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 340 bytes --]

Hi!

> From: James Smart <jsmart2021@gmail.com>
> 
> [ Upstream commit df0101197c4d9596682901631f3ee193ed354873 ]

There's something strange going on with this commit. It is in autosel
for 4.9 and 5.10, but not 4.19. Mistake?

Best regards,

								Pavel
-- 
People of Russia, stop Putin before his war on Ukraine escalates.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]