All of lore.kernel.org
 help / color / mirror / Atom feed
From: Arnd Bergmann <arnd@kernel.org>
To: linux-omap@vger.kernel.org, tony@atomide.com,
	aaro.koskinen@iki.fi, jmkrzyszt@gmail.com
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	linux-fbdev@vger.kernel.org,
	Dominik Brodowski <linux@dominikbrodowski.net>,
	Lee Jones <lee.jones@linaro.org>,
	Daniel Thompson <daniel.thompson@linaro.org>,
	Kevin Hilman <khilman@kernel.org>,
	Peter Ujfalusi <peter.ujfalusi@gmail.com>,
	Helge Deller <deller@gmx.de>,
	Russell King <linux@armlinux.org.uk>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Alan Stern <stern@rowland.harvard.edu>,
	linux-serial@vger.kernel.org, linux-input@vger.kernel.org,
	Arnd Bergmann <arnd@arndb.de>, Mark Brown <broonie@kernel.org>,
	dri-devel@lists.freedesktop.org,
	linux-arm-kernel@lists.infradead.org,
	Felipe Balbi <balbi@kernel.org>, Paul Walmsley <paul@pwsan.com>,
	Jingoo Han <jingoohan1@gmail.com>,
	linux-usb@vger.kernel.org, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
	dmaengine@vger.kernel.org, alsa-devel@alsa-project.org
Subject: [PATCH 10/41] ARM: omap1: move CF chipselect setup to board file
Date: Tue, 19 Apr 2022 15:36:52 +0200	[thread overview]
Message-ID: <20220419133723.1394715-11-arnd@kernel.org> (raw)
In-Reply-To: <20220419133723.1394715-1-arnd@kernel.org>

From: Arnd Bergmann <arnd@arndb.de>

There is only one board that uses the omap_cf driver, so
moving the chipselect configuration there does not lead
to code duplication but avoids the use of mach/tc.h
in drivers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-omap1/board-osk.c | 38 ++++++++++++++++++++++++++++-----
 drivers/pcmcia/Kconfig          |  3 ++-
 drivers/pcmcia/omap_cf.c        | 38 ++++++---------------------------
 3 files changed, 42 insertions(+), 37 deletions(-)

diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index b627a4351cf0..5dbc8f109aa7 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -153,14 +153,14 @@ static struct resource osk5912_cf_resources[] = {
 	[0] = {
 		.flags	= IORESOURCE_IRQ,
 	},
+	[1] = {
+		.flags = IORESOURCE_MEM,
+	},
 };
 
 static struct platform_device osk5912_cf_device = {
 	.name		= "omap_cf",
 	.id		= -1,
-	.dev = {
-		.platform_data	= (void *) 2 /* CS2 */,
-	},
 	.num_resources	= ARRAY_SIZE(osk5912_cf_resources),
 	.resource	= osk5912_cf_resources,
 };
@@ -275,13 +275,41 @@ static void __init osk_init_smc91x(void)
 	omap_writel(l, EMIFS_CCS(1));
 }
 
-static void __init osk_init_cf(void)
+static void __init osk_init_cf(int seg)
 {
+	struct resource *res = &osk5912_cf_resources[1];
+
 	omap_cfg_reg(M7_1610_GPIO62);
 	if ((gpio_request(62, "cf_irq")) < 0) {
 		printk("Error requesting gpio 62 for CF irq\n");
 		return;
 	}
+
+	switch (seg) {
+	/* NOTE: CS0 could be configured too ... */
+	case 1:
+		res->start = OMAP_CS1_PHYS;
+		break;
+	case 2:
+		res->start = OMAP_CS2_PHYS;
+		break;
+	case 3:
+		res->start = omap_cs3_phys();
+		break;
+	}
+
+	res->end = res->start + SZ_8K - 1;
+	osk5912_cf_device.dev.platform_data = (void *)(uintptr_t)seg;
+
+	/* NOTE:  better EMIFS setup might support more cards; but the
+	 * TRM only shows how to affect regular flash signals, not their
+	 * CF/PCMCIA variants...
+	 */
+	pr_debug("%s: cs%d, previous ccs %08x acs %08x\n", __func__,
+		seg, omap_readl(EMIFS_CCS(seg)), omap_readl(EMIFS_ACS(seg)));
+	omap_writel(0x0004a1b3, EMIFS_CCS(seg));	/* synch mode 4 etc */
+	omap_writel(0x00000000, EMIFS_ACS(seg));	/* OE hold/setup */
+
 	/* the CF I/O IRQ is really active-low */
 	irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
 }
@@ -580,7 +608,7 @@ static void __init osk_init(void)
 	u32 l;
 
 	osk_init_smc91x();
-	osk_init_cf();
+	osk_init_cf(2); /* CS2 */
 
 	/* Workaround for wrong CS3 (NOR flash) timing
 	 * There are some U-Boot versions out there which configure
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 2ce261cfff8e..ec977f031bc2 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -246,7 +246,8 @@ config PCMCIA_VRC4171
 
 config OMAP_CF
 	tristate "OMAP CompactFlash Controller"
-	depends on PCMCIA && ARCH_OMAP16XX
+	depends on PCMCIA
+	depends on ARCH_OMAP16XX || (ARM && COMPILE_TEST)
 	help
 	  Say Y here to support the CompactFlash controller on OMAP.
 	  Note that this doesn't support "True IDE" mode.
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index f0b2c2d03469..093022ce7d91 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -16,13 +16,12 @@
 
 #include <pcmcia/ss.h>
 
-#include <mach/hardware.h>
 #include <asm/io.h>
 #include <linux/sizes.h>
 
-#include <mach/mux.h>
-#include <mach/tc.h>
-
+#include <linux/soc/ti/omap1-io.h>
+#include <linux/soc/ti/omap1-soc.h>
+#include <linux/soc/ti/omap1-mux.h>
 
 /* NOTE:  don't expect this to support many I/O cards.  The 16xx chips have
  * hard-wired timings to support Compact Flash memory cards; they won't work
@@ -205,6 +204,7 @@ static int __init omap_cf_probe(struct platform_device *pdev)
 	struct omap_cf_socket	*cf;
 	int			irq;
 	int			status;
+	struct resource		*res;
 
 	seg = (int) pdev->dev.platform_data;
 	if (seg == 0 || seg > 3)
@@ -215,6 +215,8 @@ static int __init omap_cf_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return -EINVAL;
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
 	cf = kzalloc(sizeof *cf, GFP_KERNEL);
 	if (!cf)
 		return -ENOMEM;
@@ -230,24 +232,7 @@ static int __init omap_cf_probe(struct platform_device *pdev)
 		goto fail0;
 	cf->irq = irq;
 	cf->socket.pci_irq = irq;
-
-	switch (seg) {
-	/* NOTE: CS0 could be configured too ... */
-	case 1:
-		cf->phys_cf = OMAP_CS1_PHYS;
-		break;
-	case 2:
-		cf->phys_cf = OMAP_CS2_PHYS;
-		break;
-	case 3:
-		cf->phys_cf = omap_cs3_phys();
-		break;
-	default:
-		goto  fail1;
-	}
-	cf->iomem.start = cf->phys_cf;
-	cf->iomem.end = cf->iomem.end + SZ_8K - 1;
-	cf->iomem.flags = IORESOURCE_MEM;
+	cf->phys_cf = res->start;
 
 	/* pcmcia layer only remaps "real" memory */
 	cf->socket.io_offset = (unsigned long)
@@ -273,15 +258,6 @@ static int __init omap_cf_probe(struct platform_device *pdev)
 
 	pr_info("%s: cs%d on irq %d\n", driver_name, seg, irq);
 
-	/* NOTE:  better EMIFS setup might support more cards; but the
-	 * TRM only shows how to affect regular flash signals, not their
-	 * CF/PCMCIA variants...
-	 */
-	pr_debug("%s: cs%d, previous ccs %08x acs %08x\n", driver_name,
-		seg, omap_readl(EMIFS_CCS(seg)), omap_readl(EMIFS_ACS(seg)));
-	omap_writel(0x0004a1b3, EMIFS_CCS(seg));	/* synch mode 4 etc */
-	omap_writel(0x00000000, EMIFS_ACS(seg));	/* OE hold/setup */
-
 	/* CF uses armxor_ck, which is "always" available */
 
 	pr_debug("%s: sts %04x cfg %04x control %04x %s\n", driver_name,
-- 
2.29.2


WARNING: multiple messages have this Message-ID
From: Arnd Bergmann <arnd@kernel.org>
To: linux-omap@vger.kernel.org, tony@atomide.com,
	aaro.koskinen@iki.fi, jmkrzyszt@gmail.com
Cc: Arnd Bergmann <arnd@arndb.de>,
	Russell King <linux@armlinux.org.uk>,
	Paul Walmsley <paul@pwsan.com>, Kevin Hilman <khilman@kernel.org>,
	Peter Ujfalusi <peter.ujfalusi@gmail.com>,
	Vinod Koul <vkoul@kernel.org>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Dominik Brodowski <linux@dominikbrodowski.net>,
	Mark Brown <broonie@kernel.org>, Felipe Balbi <balbi@kernel.org>,
	Alan Stern <stern@rowland.harvard.edu>,
	Lee Jones <lee.jones@linaro.org>,
	Daniel Thompson <daniel.thompson@linaro.org>,
	Jingoo Han <jingoohan1@gmail.com>, Helge Deller <deller@gmx.de>,
	Linus Walleij <linus.walleij@linaro.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
	dmaengine@vger.kernel.org, linux-input@vger.kernel.org,
	linux-mmc@vger.kernel.org, linux-serial@vger.kernel.org,
	dri-devel@lists.freedesktop.org, linux-fbdev@vger.kernel.org,
	alsa-devel@alsa-project.org
Subject: [PATCH 10/41] ARM: omap1: move CF chipselect setup to board file
Date: Tue, 19 Apr 2022 15:36:52 +0200	[thread overview]
Message-ID: <20220419133723.1394715-11-arnd@kernel.org> (raw)
In-Reply-To: <20220419133723.1394715-1-arnd@kernel.org>

From: Arnd Bergmann <arnd@arndb.de>

There is only one board that uses the omap_cf driver, so
moving the chipselect configuration there does not lead
to code duplication but avoids the use of mach/tc.h
in drivers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-omap1/board-osk.c | 38 ++++++++++++++++++++++++++++-----
 drivers/pcmcia/Kconfig          |  3 ++-
 drivers/pcmcia/omap_cf.c        | 38 ++++++---------------------------
 3 files changed, 42 insertions(+), 37 deletions(-)

diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index b627a4351cf0..5dbc8f109aa7 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -153,14 +153,14 @@ static struct resource osk5912_cf_resources[] = {
 	[0] = {
 		.flags	= IORESOURCE_IRQ,
 	},
+	[1] = {
+		.flags = IORESOURCE_MEM,
+	},
 };
 
 static struct platform_device osk5912_cf_device = {
 	.name		= "omap_cf",
 	.id		= -1,
-	.dev = {
-		.platform_data	= (void *) 2 /* CS2 */,
-	},
 	.num_resources	= ARRAY_SIZE(osk5912_cf_resources),
 	.resource	= osk5912_cf_resources,
 };
@@ -275,13 +275,41 @@ static void __init osk_init_smc91x(void)
 	omap_writel(l, EMIFS_CCS(1));
 }
 
-static void __init osk_init_cf(void)
+static void __init osk_init_cf(int seg)
 {
+	struct resource *res = &osk5912_cf_resources[1];
+
 	omap_cfg_reg(M7_1610_GPIO62);
 	if ((gpio_request(62, "cf_irq")) < 0) {
 		printk("Error requesting gpio 62 for CF irq\n");
 		return;
 	}
+
+	switch (seg) {
+	/* NOTE: CS0 could be configured too ... */
+	case 1:
+		res->start = OMAP_CS1_PHYS;
+		break;
+	case 2:
+		res->start = OMAP_CS2_PHYS;
+		break;
+	case 3:
+		res->start = omap_cs3_phys();
+		break;
+	}
+
+	res->end = res->start + SZ_8K - 1;
+	osk5912_cf_device.dev.platform_data = (void *)(uintptr_t)seg;
+
+	/* NOTE:  better EMIFS setup might support more cards; but the
+	 * TRM only shows how to affect regular flash signals, not their
+	 * CF/PCMCIA variants...
+	 */
+	pr_debug("%s: cs%d, previous ccs %08x acs %08x\n", __func__,
+		seg, omap_readl(EMIFS_CCS(seg)), omap_readl(EMIFS_ACS(seg)));
+	omap_writel(0x0004a1b3, EMIFS_CCS(seg));	/* synch mode 4 etc */
+	omap_writel(0x00000000, EMIFS_ACS(seg));	/* OE hold/setup */
+
 	/* the CF I/O IRQ is really active-low */
 	irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
 }
@@ -580,7 +608,7 @@ static void __init osk_init(void)
 	u32 l;
 
 	osk_init_smc91x();
-	osk_init_cf();
+	osk_init_cf(2); /* CS2 */
 
 	/* Workaround for wrong CS3 (NOR flash) timing
 	 * There are some U-Boot versions out there which configure
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 2ce261cfff8e..ec977f031bc2 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -246,7 +246,8 @@ config PCMCIA_VRC4171
 
 config OMAP_CF
 	tristate "OMAP CompactFlash Controller"
-	depends on PCMCIA && ARCH_OMAP16XX
+	depends on PCMCIA
+	depends on ARCH_OMAP16XX || (ARM && COMPILE_TEST)
 	help
 	  Say Y here to support the CompactFlash controller on OMAP.
 	  Note that this doesn't support "True IDE" mode.
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index f0b2c2d03469..093022ce7d91 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -16,13 +16,12 @@
 
 #include <pcmcia/ss.h>
 
-#include <mach/hardware.h>
 #include <asm/io.h>
 #include <linux/sizes.h>
 
-#include <mach/mux.h>
-#include <mach/tc.h>
-
+#include <linux/soc/ti/omap1-io.h>
+#include <linux/soc/ti/omap1-soc.h>
+#include <linux/soc/ti/omap1-mux.h>
 
 /* NOTE:  don't expect this to support many I/O cards.  The 16xx chips have
  * hard-wired timings to support Compact Flash memory cards; they won't work
@@ -205,6 +204,7 @@ static int __init omap_cf_probe(struct platform_device *pdev)
 	struct omap_cf_socket	*cf;
 	int			irq;
 	int			status;
+	struct resource		*res;
 
 	seg = (int) pdev->dev.platform_data;
 	if (seg == 0 || seg > 3)
@@ -215,6 +215,8 @@ static int __init omap_cf_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return -EINVAL;
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
 	cf = kzalloc(sizeof *cf, GFP_KERNEL);
 	if (!cf)
 		return -ENOMEM;
@@ -230,24 +232,7 @@ static int __init omap_cf_probe(struct platform_device *pdev)
 		goto fail0;
 	cf->irq = irq;
 	cf->socket.pci_irq = irq;
-
-	switch (seg) {
-	/* NOTE: CS0 could be configured too ... */
-	case 1:
-		cf->phys_cf = OMAP_CS1_PHYS;
-		break;
-	case 2:
-		cf->phys_cf = OMAP_CS2_PHYS;
-		break;
-	case 3:
-		cf->phys_cf = omap_cs3_phys();
-		break;
-	default:
-		goto  fail1;
-	}
-	cf->iomem.start = cf->phys_cf;
-	cf->iomem.end = cf->iomem.end + SZ_8K - 1;
-	cf->iomem.flags = IORESOURCE_MEM;
+	cf->phys_cf = res->start;
 
 	/* pcmcia layer only remaps "real" memory */
 	cf->socket.io_offset = (unsigned long)
@@ -273,15 +258,6 @@ static int __init omap_cf_probe(struct platform_device *pdev)
 
 	pr_info("%s: cs%d on irq %d\n", driver_name, seg, irq);
 
-	/* NOTE:  better EMIFS setup might support more cards; but the
-	 * TRM only shows how to affect regular flash signals, not their
-	 * CF/PCMCIA variants...
-	 */
-	pr_debug("%s: cs%d, previous ccs %08x acs %08x\n", driver_name,
-		seg, omap_readl(EMIFS_CCS(seg)), omap_readl(EMIFS_ACS(seg)));
-	omap_writel(0x0004a1b3, EMIFS_CCS(seg));	/* synch mode 4 etc */
-	omap_writel(0x00000000, EMIFS_ACS(seg));	/* OE hold/setup */
-
 	/* CF uses armxor_ck, which is "always" available */
 
 	pr_debug("%s: sts %04x cfg %04x control %04x %s\n", driver_name,
-- 
2.29.2


WARNING: multiple messages have this Message-ID
From: Arnd Bergmann <arnd@kernel.org>
To: linux-omap@vger.kernel.org, tony@atomide.com,
	aaro.koskinen@iki.fi, jmkrzyszt@gmail.com
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	linux-fbdev@vger.kernel.org,
	Dominik Brodowski <linux@dominikbrodowski.net>,
	Lee Jones <lee.jones@linaro.org>,
	Daniel Thompson <daniel.thompson@linaro.org>,
	Kevin Hilman <khilman@kernel.org>,
	Peter Ujfalusi <peter.ujfalusi@gmail.com>,
	Helge Deller <deller@gmx.de>,
	Russell King <linux@armlinux.org.uk>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Alan Stern <stern@rowland.harvard.edu>,
	linux-serial@vger.kernel.org, linux-input@vger.kernel.org,
	Arnd Bergmann <arnd@arndb.de>, Mark Brown <broonie@kernel.org>,
	dri-devel@lists.freedesktop.org,
	linux-arm-kernel@lists.infradead.org,
	Felipe Balbi <balbi@kernel.org>, Paul Walmsley <paul@pwsan.com>,
	Jingoo Han <jingoohan1@gmail.com>,
	linux-usb@vger.kernel.org, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
	dmaengine@vger.kernel.org, alsa-devel@alsa-project.org
Subject: [PATCH 10/41] ARM: omap1: move CF chipselect setup to board file
Date: Tue, 19 Apr 2022 15:36:52 +0200	[thread overview]
Message-ID: <20220419133723.1394715-11-arnd@kernel.org> (raw)
In-Reply-To: <20220419133723.1394715-1-arnd@kernel.org>

From: Arnd Bergmann <arnd@arndb.de>

There is only one board that uses the omap_cf driver, so
moving the chipselect configuration there does not lead
to code duplication but avoids the use of mach/tc.h
in drivers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-omap1/board-osk.c | 38 ++++++++++++++++++++++++++++-----
 drivers/pcmcia/Kconfig          |  3 ++-
 drivers/pcmcia/omap_cf.c        | 38 ++++++---------------------------
 3 files changed, 42 insertions(+), 37 deletions(-)

diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index b627a4351cf0..5dbc8f109aa7 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -153,14 +153,14 @@ static struct resource osk5912_cf_resources[] = {
 	[0] = {
 		.flags	= IORESOURCE_IRQ,
 	},
+	[1] = {
+		.flags = IORESOURCE_MEM,
+	},
 };
 
 static struct platform_device osk5912_cf_device = {
 	.name		= "omap_cf",
 	.id		= -1,
-	.dev = {
-		.platform_data	= (void *) 2 /* CS2 */,
-	},
 	.num_resources	= ARRAY_SIZE(osk5912_cf_resources),
 	.resource	= osk5912_cf_resources,
 };
@@ -275,13 +275,41 @@ static void __init osk_init_smc91x(void)
 	omap_writel(l, EMIFS_CCS(1));
 }
 
-static void __init osk_init_cf(void)
+static void __init osk_init_cf(int seg)
 {
+	struct resource *res = &osk5912_cf_resources[1];
+
 	omap_cfg_reg(M7_1610_GPIO62);
 	if ((gpio_request(62, "cf_irq")) < 0) {
 		printk("Error requesting gpio 62 for CF irq\n");
 		return;
 	}
+
+	switch (seg) {
+	/* NOTE: CS0 could be configured too ... */
+	case 1:
+		res->start = OMAP_CS1_PHYS;
+		break;
+	case 2:
+		res->start = OMAP_CS2_PHYS;
+		break;
+	case 3:
+		res->start = omap_cs3_phys();
+		break;
+	}
+
+	res->end = res->start + SZ_8K - 1;
+	osk5912_cf_device.dev.platform_data = (void *)(uintptr_t)seg;
+
+	/* NOTE:  better EMIFS setup might support more cards; but the
+	 * TRM only shows how to affect regular flash signals, not their
+	 * CF/PCMCIA variants...
+	 */
+	pr_debug("%s: cs%d, previous ccs %08x acs %08x\n", __func__,
+		seg, omap_readl(EMIFS_CCS(seg)), omap_readl(EMIFS_ACS(seg)));
+	omap_writel(0x0004a1b3, EMIFS_CCS(seg));	/* synch mode 4 etc */
+	omap_writel(0x00000000, EMIFS_ACS(seg));	/* OE hold/setup */
+
 	/* the CF I/O IRQ is really active-low */
 	irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
 }
@@ -580,7 +608,7 @@ static void __init osk_init(void)
 	u32 l;
 
 	osk_init_smc91x();
-	osk_init_cf();
+	osk_init_cf(2); /* CS2 */
 
 	/* Workaround for wrong CS3 (NOR flash) timing
 	 * There are some U-Boot versions out there which configure
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 2ce261cfff8e..ec977f031bc2 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -246,7 +246,8 @@ config PCMCIA_VRC4171
 
 config OMAP_CF
 	tristate "OMAP CompactFlash Controller"
-	depends on PCMCIA && ARCH_OMAP16XX
+	depends on PCMCIA
+	depends on ARCH_OMAP16XX || (ARM && COMPILE_TEST)
 	help
 	  Say Y here to support the CompactFlash controller on OMAP.
 	  Note that this doesn't support "True IDE" mode.
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index f0b2c2d03469..093022ce7d91 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -16,13 +16,12 @@
 
 #include <pcmcia/ss.h>
 
-#include <mach/hardware.h>
 #include <asm/io.h>
 #include <linux/sizes.h>
 
-#include <mach/mux.h>
-#include <mach/tc.h>
-
+#include <linux/soc/ti/omap1-io.h>
+#include <linux/soc/ti/omap1-soc.h>
+#include <linux/soc/ti/omap1-mux.h>
 
 /* NOTE:  don't expect this to support many I/O cards.  The 16xx chips have
  * hard-wired timings to support Compact Flash memory cards; they won't work
@@ -205,6 +204,7 @@ static int __init omap_cf_probe(struct platform_device *pdev)
 	struct omap_cf_socket	*cf;
 	int			irq;
 	int			status;
+	struct resource		*res;
 
 	seg = (int) pdev->dev.platform_data;
 	if (seg == 0 || seg > 3)
@@ -215,6 +215,8 @@ static int __init omap_cf_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return -EINVAL;
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
 	cf = kzalloc(sizeof *cf, GFP_KERNEL);
 	if (!cf)
 		return -ENOMEM;
@@ -230,24 +232,7 @@ static int __init omap_cf_probe(struct platform_device *pdev)
 		goto fail0;
 	cf->irq = irq;
 	cf->socket.pci_irq = irq;
-
-	switch (seg) {
-	/* NOTE: CS0 could be configured too ... */
-	case 1:
-		cf->phys_cf = OMAP_CS1_PHYS;
-		break;
-	case 2:
-		cf->phys_cf = OMAP_CS2_PHYS;
-		break;
-	case 3:
-		cf->phys_cf = omap_cs3_phys();
-		break;
-	default:
-		goto  fail1;
-	}
-	cf->iomem.start = cf->phys_cf;
-	cf->iomem.end = cf->iomem.end + SZ_8K - 1;
-	cf->iomem.flags = IORESOURCE_MEM;
+	cf->phys_cf = res->start;
 
 	/* pcmcia layer only remaps "real" memory */
 	cf->socket.io_offset = (unsigned long)
@@ -273,15 +258,6 @@ static int __init omap_cf_probe(struct platform_device *pdev)
 
 	pr_info("%s: cs%d on irq %d\n", driver_name, seg, irq);
 
-	/* NOTE:  better EMIFS setup might support more cards; but the
-	 * TRM only shows how to affect regular flash signals, not their
-	 * CF/PCMCIA variants...
-	 */
-	pr_debug("%s: cs%d, previous ccs %08x acs %08x\n", driver_name,
-		seg, omap_readl(EMIFS_CCS(seg)), omap_readl(EMIFS_ACS(seg)));
-	omap_writel(0x0004a1b3, EMIFS_CCS(seg));	/* synch mode 4 etc */
-	omap_writel(0x00000000, EMIFS_ACS(seg));	/* OE hold/setup */
-
 	/* CF uses armxor_ck, which is "always" available */
 
 	pr_debug("%s: sts %04x cfg %04x control %04x %s\n", driver_name,
-- 
2.29.2


WARNING: multiple messages have this Message-ID
From: Arnd Bergmann <arnd@kernel.org>
To: linux-omap@vger.kernel.org, tony@atomide.com,
	aaro.koskinen@iki.fi, jmkrzyszt@gmail.com
Cc: Arnd Bergmann <arnd@arndb.de>,
	Russell King <linux@armlinux.org.uk>,
	Paul Walmsley <paul@pwsan.com>, Kevin Hilman <khilman@kernel.org>,
	Peter Ujfalusi <peter.ujfalusi@gmail.com>,
	Vinod Koul <vkoul@kernel.org>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Dominik Brodowski <linux@dominikbrodowski.net>,
	Mark Brown <broonie@kernel.org>, Felipe Balbi <balbi@kernel.org>,
	Alan Stern <stern@rowland.harvard.edu>,
	Lee Jones <lee.jones@linaro.org>,
	Daniel Thompson <daniel.thompson@linaro.org>,
	Jingoo Han <jingoohan1@gmail.com>, Helge Deller <deller@gmx.de>,
	Linus Walleij <linus.walleij@linaro.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
	dmaengine@vger.kernel.org, linux-input@vger.kernel.org,
	linux-mmc@vger.kernel.org, linux-serial@vger.kernel.org,
	dri-devel@lists.freedesktop.org, linux-fbdev@vger.kernel.org,
	alsa-devel@alsa-project.org
Subject: [PATCH 10/41] ARM: omap1: move CF chipselect setup to board file
Date: Tue, 19 Apr 2022 15:36:52 +0200	[thread overview]
Message-ID: <20220419133723.1394715-11-arnd@kernel.org> (raw)
In-Reply-To: <20220419133723.1394715-1-arnd@kernel.org>

From: Arnd Bergmann <arnd@arndb.de>

There is only one board that uses the omap_cf driver, so
moving the chipselect configuration there does not lead
to code duplication but avoids the use of mach/tc.h
in drivers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-omap1/board-osk.c | 38 ++++++++++++++++++++++++++++-----
 drivers/pcmcia/Kconfig          |  3 ++-
 drivers/pcmcia/omap_cf.c        | 38 ++++++---------------------------
 3 files changed, 42 insertions(+), 37 deletions(-)

diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index b627a4351cf0..5dbc8f109aa7 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -153,14 +153,14 @@ static struct resource osk5912_cf_resources[] = {
 	[0] = {
 		.flags	= IORESOURCE_IRQ,
 	},
+	[1] = {
+		.flags = IORESOURCE_MEM,
+	},
 };
 
 static struct platform_device osk5912_cf_device = {
 	.name		= "omap_cf",
 	.id		= -1,
-	.dev = {
-		.platform_data	= (void *) 2 /* CS2 */,
-	},
 	.num_resources	= ARRAY_SIZE(osk5912_cf_resources),
 	.resource	= osk5912_cf_resources,
 };
@@ -275,13 +275,41 @@ static void __init osk_init_smc91x(void)
 	omap_writel(l, EMIFS_CCS(1));
 }
 
-static void __init osk_init_cf(void)
+static void __init osk_init_cf(int seg)
 {
+	struct resource *res = &osk5912_cf_resources[1];
+
 	omap_cfg_reg(M7_1610_GPIO62);
 	if ((gpio_request(62, "cf_irq")) < 0) {
 		printk("Error requesting gpio 62 for CF irq\n");
 		return;
 	}
+
+	switch (seg) {
+	/* NOTE: CS0 could be configured too ... */
+	case 1:
+		res->start = OMAP_CS1_PHYS;
+		break;
+	case 2:
+		res->start = OMAP_CS2_PHYS;
+		break;
+	case 3:
+		res->start = omap_cs3_phys();
+		break;
+	}
+
+	res->end = res->start + SZ_8K - 1;
+	osk5912_cf_device.dev.platform_data = (void *)(uintptr_t)seg;
+
+	/* NOTE:  better EMIFS setup might support more cards; but the
+	 * TRM only shows how to affect regular flash signals, not their
+	 * CF/PCMCIA variants...
+	 */
+	pr_debug("%s: cs%d, previous ccs %08x acs %08x\n", __func__,
+		seg, omap_readl(EMIFS_CCS(seg)), omap_readl(EMIFS_ACS(seg)));
+	omap_writel(0x0004a1b3, EMIFS_CCS(seg));	/* synch mode 4 etc */
+	omap_writel(0x00000000, EMIFS_ACS(seg));	/* OE hold/setup */
+
 	/* the CF I/O IRQ is really active-low */
 	irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
 }
@@ -580,7 +608,7 @@ static void __init osk_init(void)
 	u32 l;
 
 	osk_init_smc91x();
-	osk_init_cf();
+	osk_init_cf(2); /* CS2 */
 
 	/* Workaround for wrong CS3 (NOR flash) timing
 	 * There are some U-Boot versions out there which configure
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 2ce261cfff8e..ec977f031bc2 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -246,7 +246,8 @@ config PCMCIA_VRC4171
 
 config OMAP_CF
 	tristate "OMAP CompactFlash Controller"
-	depends on PCMCIA && ARCH_OMAP16XX
+	depends on PCMCIA
+	depends on ARCH_OMAP16XX || (ARM && COMPILE_TEST)
 	help
 	  Say Y here to support the CompactFlash controller on OMAP.
 	  Note that this doesn't support "True IDE" mode.
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index f0b2c2d03469..093022ce7d91 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -16,13 +16,12 @@
 
 #include <pcmcia/ss.h>
 
-#include <mach/hardware.h>
 #include <asm/io.h>
 #include <linux/sizes.h>
 
-#include <mach/mux.h>
-#include <mach/tc.h>
-
+#include <linux/soc/ti/omap1-io.h>
+#include <linux/soc/ti/omap1-soc.h>
+#include <linux/soc/ti/omap1-mux.h>
 
 /* NOTE:  don't expect this to support many I/O cards.  The 16xx chips have
  * hard-wired timings to support Compact Flash memory cards; they won't work
@@ -205,6 +204,7 @@ static int __init omap_cf_probe(struct platform_device *pdev)
 	struct omap_cf_socket	*cf;
 	int			irq;
 	int			status;
+	struct resource		*res;
 
 	seg = (int) pdev->dev.platform_data;
 	if (seg == 0 || seg > 3)
@@ -215,6 +215,8 @@ static int __init omap_cf_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return -EINVAL;
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
 	cf = kzalloc(sizeof *cf, GFP_KERNEL);
 	if (!cf)
 		return -ENOMEM;
@@ -230,24 +232,7 @@ static int __init omap_cf_probe(struct platform_device *pdev)
 		goto fail0;
 	cf->irq = irq;
 	cf->socket.pci_irq = irq;
-
-	switch (seg) {
-	/* NOTE: CS0 could be configured too ... */
-	case 1:
-		cf->phys_cf = OMAP_CS1_PHYS;
-		break;
-	case 2:
-		cf->phys_cf = OMAP_CS2_PHYS;
-		break;
-	case 3:
-		cf->phys_cf = omap_cs3_phys();
-		break;
-	default:
-		goto  fail1;
-	}
-	cf->iomem.start = cf->phys_cf;
-	cf->iomem.end = cf->iomem.end + SZ_8K - 1;
-	cf->iomem.flags = IORESOURCE_MEM;
+	cf->phys_cf = res->start;
 
 	/* pcmcia layer only remaps "real" memory */
 	cf->socket.io_offset = (unsigned long)
@@ -273,15 +258,6 @@ static int __init omap_cf_probe(struct platform_device *pdev)
 
 	pr_info("%s: cs%d on irq %d\n", driver_name, seg, irq);
 
-	/* NOTE:  better EMIFS setup might support more cards; but the
-	 * TRM only shows how to affect regular flash signals, not their
-	 * CF/PCMCIA variants...
-	 */
-	pr_debug("%s: cs%d, previous ccs %08x acs %08x\n", driver_name,
-		seg, omap_readl(EMIFS_CCS(seg)), omap_readl(EMIFS_ACS(seg)));
-	omap_writel(0x0004a1b3, EMIFS_CCS(seg));	/* synch mode 4 etc */
-	omap_writel(0x00000000, EMIFS_ACS(seg));	/* OE hold/setup */
-
 	/* CF uses armxor_ck, which is "always" available */
 
 	pr_debug("%s: sts %04x cfg %04x control %04x %s\n", driver_name,
-- 
2.29.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-04-19 13:38 UTC|newest]

Thread overview: 245+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-19 13:36 [PATCH 00/41] OMAP1 full multiplatform conversion Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 01/41] video: fbdev: omapfb: lcd_ams_delta: fix unused variable warning Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-20  9:24   ` Sergei Shtylyov
2022-04-20  9:24     ` Sergei Shtylyov
2022-04-20  9:24     ` Sergei Shtylyov
2022-04-20  9:24     ` Sergei Shtylyov
2022-04-20 11:32     ` Arnd Bergmann
2022-04-20 11:32       ` Arnd Bergmann
2022-04-20 11:32       ` Arnd Bergmann
2022-04-20 11:32       ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 02/41] ARM: omap1: innovator: pass lcd control address as pdata Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 03/41] ARM: omap1: move lcd_dma code into omapfb driver Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 04/41] ARM: omap1: declare a dummy omap_set_dma_priority Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 05/41] fbdev: omap: pass irqs as resource Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 06/41] ARM: omap1: ams-delta: remove camera leftovers Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 07/41] ARM: omap1: move mach/usb.h to include/linux/soc Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 08/41] ARM: omap1: move some headers " Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 09/41] ARM: omap1: move perseus spi pinconf to board file Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36 ` Arnd Bergmann [this message]
2022-04-19 13:36   ` [PATCH 10/41] ARM: omap1: move CF chipselect setup " Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 11/41] fbdev: omap: avoid using mach/*.h files Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 12/41] usb: omap: avoid mach/*.h headers Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 13/41] clocksource: ti-dmtimer: avoid using mach/hardware.h Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 14/41] serial: 8250/omap1: include linux/soc/ti/omap1-soc.h Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-20 14:46   ` Greg KH
2022-04-20 14:46     ` Greg KH
2022-04-20 14:46     ` Greg KH
2022-04-20 14:46     ` Greg KH
2022-04-19 13:36 ` [PATCH 15/41] input: omap: void using mach/*.h headers Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-20 20:44   ` Dmitry Torokhov
2022-04-20 20:44     ` Dmitry Torokhov
2022-04-20 20:44     ` Dmitry Torokhov
2022-04-20 20:44     ` Dmitry Torokhov
2022-04-19 13:36 ` [PATCH 16/41] ARM: omap1: innovator: move ohci phy power handling to board file Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36 ` [PATCH 17/41] ARM: omap1: move 32k counter from plat-omap to mach-omap1 Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-19 13:36   ` Arnd Bergmann
2022-04-21  6:17   ` Tony Lindgren
2022-04-21  6:17     ` Tony Lindgren
2022-04-21  6:17     ` Tony Lindgren
2022-04-21  6:17     ` Tony Lindgren
2022-04-19 13:37 ` [PATCH 18/41] ARM: omap: remove debug-leds driver Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 19/41] ARM: omap: dma: make usb support optional Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-29 19:24   ` Péter Ujfalusi
2022-04-29 19:24     ` Péter Ujfalusi
2022-04-29 19:24     ` Péter Ujfalusi
2022-04-19 13:37 ` [PATCH 20/41] dma: omap: hide legacy interface Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-22  5:55   ` Vinod Koul
2022-04-22  5:55     ` Vinod Koul
2022-04-22  5:55     ` Vinod Koul
2022-04-22  5:55     ` Vinod Koul
2022-04-19 13:37 ` [PATCH 21/41] ARM: omap1: dma: remove omap2 specific bits Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-29 19:26   ` Péter Ujfalusi
2022-04-29 19:26     ` Péter Ujfalusi
2022-04-29 19:26     ` Péter Ujfalusi
2022-04-19 13:37 ` [PATCH 22/41] ARM: omap1: move plat/dma.c to mach/omap-dma.c Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-29 19:36   ` Péter Ujfalusi
2022-04-29 19:36     ` Péter Ujfalusi
2022-04-29 19:36     ` Péter Ujfalusi
2022-04-19 13:37 ` [PATCH 23/41] ARM: omap: split up arch/arm/plat-omap/Kconfig Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 24/41] ARM: omap: un-merge plat/sram.c Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-21  6:32   ` Tony Lindgren
2022-04-21  6:32     ` Tony Lindgren
2022-04-21  6:32     ` Tony Lindgren
2022-04-21  6:32     ` Tony Lindgren
2022-04-19 13:37 ` [PATCH 25/41] ARM: omap: remove empty plat-omap directory Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 26/41] ARM: omap1: relocate static I/O mapping Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-20 13:46   ` Aaro Koskinen
2022-04-20 13:46     ` Aaro Koskinen
2022-04-20 13:46     ` Aaro Koskinen
2022-04-20 13:46     ` Aaro Koskinen
2022-04-20 19:20     ` Arnd Bergmann
2022-04-20 19:20       ` Arnd Bergmann
2022-04-20 19:20       ` Arnd Bergmann
2022-04-20 19:20       ` Arnd Bergmann
2022-04-21  5:19       ` Tony Lindgren
2022-04-21  5:19         ` Tony Lindgren
2022-04-21  5:19         ` Tony Lindgren
2022-04-21  5:19         ` Tony Lindgren
2022-04-19 13:37 ` [PATCH 27/41] ARM: omap1: use pci_remap_iospace() for omap_cf Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 28/41] ARM: omap1: move mach/*.h into mach directory Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 29/41] ARM: omap1: fix build with no SoC selected Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 30/41] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 31/41] ARM: OMAP1: clock: Fix early UART rate issues Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 32/41] ARM: OMAP1: clock: Fix UART rate reporting algorithm Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 33/41] ARM: OMAP1: clock: Remove unused code Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 34/41] ARM: OMAP1: clock: Remove noop code Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 35/41] usb: host: ohci-omap: Make it CCF clk API compatible Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 36/41] usb: gadget: omap_udc: " Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 37/41] [MERGED] video: fbdev: omap: " Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 38/41] [MERGED] mmc: " Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 39/41] [MERGED] ASoC: ti: osk5912: " Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37 ` [PATCH 40/41] [TO BE REBASED] ARM: OMAP1: clock: Convert to CCF Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-21  6:24   ` Tony Lindgren
2022-04-21  6:24     ` Tony Lindgren
2022-04-21  6:24     ` Tony Lindgren
2022-04-21  6:24     ` Tony Lindgren
2022-04-19 13:37 ` [PATCH 41/41] [TO BE REBASED] ARM: omap1: enable multiplatform Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 13:37   ` Arnd Bergmann
2022-04-19 14:15 ` [PATCH 00/41] OMAP1 full multiplatform conversion Ulf Hansson
2022-04-19 14:15   ` Ulf Hansson
2022-04-19 14:15   ` Ulf Hansson
2022-04-19 14:15   ` Ulf Hansson
2022-04-21  6:27   ` Tony Lindgren
2022-04-21  6:27     ` Tony Lindgren
2022-04-21  6:27     ` Tony Lindgren
2022-04-21  6:27     ` Tony Lindgren
2022-04-20 17:08 ` Aaro Koskinen
2022-04-20 17:08   ` Aaro Koskinen
2022-04-20 17:08   ` Aaro Koskinen
2022-04-20 17:08   ` Aaro Koskinen
2022-04-20 20:00   ` Arnd Bergmann
2022-04-20 20:00     ` Arnd Bergmann
2022-04-20 20:00     ` Arnd Bergmann
2022-04-20 20:00     ` Arnd Bergmann
2022-04-21 13:34     ` Aaro Koskinen
2022-04-21 13:34       ` Aaro Koskinen
2022-04-21 13:34       ` Aaro Koskinen
2022-04-21 13:34       ` Aaro Koskinen
2022-04-21 14:46       ` Arnd Bergmann
2022-04-21 14:46         ` Arnd Bergmann
2022-04-21 14:46         ` Arnd Bergmann
2022-04-21 14:46         ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220419133723.1394715-11-arnd@kernel.org \
    --to=arnd@kernel.org \
    --cc=aaro.koskinen@iki.fi \
    --cc=alsa-devel@alsa-project.org \
    --cc=arnd@arndb.de \
    --cc=balbi@kernel.org \
    --cc=broonie@kernel.org \
    --cc=daniel.thompson@linaro.org \
    --cc=deller@gmx.de \
    --cc=dmaengine@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jingoohan1@gmail.com \
    --cc=jmkrzyszt@gmail.com \
    --cc=khilman@kernel.org \
    --cc=krzk@kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=linux@dominikbrodowski.net \
    --cc=paul@pwsan.com \
    --cc=peter.ujfalusi@gmail.com \
    --cc=stern@rowland.harvard.edu \
    --cc=tony@atomide.com \
    --cc=ulf.hansson@linaro.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.