All of lore.kernel.org
 help / color / mirror / Atom feed
From: Cosmin Tanislav <demonsingur@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Jonathan Cameron <jic23@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	linux-iio@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	Cosmin Tanislav <cosmin.tanislav@analog.com>
Subject: [PATCH v3 2/2] iio: adc: ad4130: add AD4130 driver
Date: Tue, 19 Apr 2022 18:08:28 +0300	[thread overview]
Message-ID: <20220419150828.191933-3-cosmin.tanislav@analog.com> (raw)
In-Reply-To: <20220419150828.191933-1-cosmin.tanislav@analog.com>

AD4130-8 is an ultra-low power, high precision, measurement solution for
low bandwidth battery operated applications.

The fully integrated AFE (Analog Front-End) includes a multiplexer for up
to 16 single-ended or 8 differential inputs, PGA (Programmable Gain
Amplifier), 24-bit Sigma-Delta ADC, on-chip reference and oscillator,
selectable filter options, smart sequencer, sensor biasing and excitation
options, diagnostics, and a FIFO buffer.

Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
---
 .../ABI/testing/sysfs-bus-iio-adc-ad4130      |   36 +
 MAINTAINERS                                   |    8 +
 drivers/iio/adc/Kconfig                       |   13 +
 drivers/iio/adc/Makefile                      |    1 +
 drivers/iio/adc/ad4130.c                      | 2078 +++++++++++++++++
 5 files changed, 2136 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130
 create mode 100644 drivers/iio/adc/ad4130.c

diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130 b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130
new file mode 100644
index 000000000000..09857dbcac32
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130
@@ -0,0 +1,36 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_filter_mode_available
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reading returns a list with the possible filter modes.
+		"sinc4"       - Sinc 4. Excellent noise performance. Long 1st
+				conversion time. No natural 50/60Hz rejection.
+		"sinc4+sinc1" - Sinc4 + averaging by 8. Low 1st conversion time.
+		"sinc3"	      - Sinc3. Moderate 1st conversion time. Good noise
+				performance.
+		"sinc3+rej60" - Sinc3 + 60Hz rejection. At a sampling frequency
+				of 50Hz, achieves simultaneous 50Hz and 60Hz
+				rejection.
+		"sinc3+sinc1" - Sinc3 + averaging by 8. Low 1st conversion time.
+				Best used with a sampling frequency of at least
+				216.19Hz.
+		"sinc3+pf1"   - Sinc3 + Post Filter 1.
+				53dB rejection @ 50Hz, 58dB rejection @ 60Hz.
+		"sinc3+pf2"   - Sinc3 + Post Filter 2.
+				70dB rejection @ 50Hz, 70dB rejection @ 60Hz.
+		"sinc3+pf3"   - Sinc3 + Post Filter 3.
+				99dB rejection @ 50Hz, 103dB rejection @ 60Hz.
+		"sinc3+pf4"   - Sinc3 + Post Filter 4.
+				103dB rejection @ 50Hz, 109dB rejection @ 60Hz.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_filter_mode
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Set the filter mode of the differential channel. When the filter
+		mode changes, the in_voltageY-voltageZ_sampling_frequency and
+		in_voltageY-voltageZ_sampling_frequency_available attributes
+		might also change to accommodate the new filter mode.
+		If the current sampling frequency is out of range for the new
+		filter mode, the sampling frequency will be changed to the
+		closest valid one.
diff --git a/MAINTAINERS b/MAINTAINERS
index b2840da5ce1f..a28dcbbeae34 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1074,6 +1074,14 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
 F:	drivers/net/amt.c
 
+ANALOG DEVICES INC AD4130 DRIVER
+M:	Cosmin Tanislav <cosmin.tanislav@analog.com>
+L:	linux-iio@vger.kernel.org
+S:	Supported
+W:	http://ez.analog.com/community/linux-device-drivers
+F:	Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml
+F:	drivers/iio/adc/ad4130.c
+
 ANALOG DEVICES INC AD7192 DRIVER
 M:	Alexandru Tachici <alexandru.tachici@analog.com>
 L:	linux-iio@vger.kernel.org
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 48ace7412874..3599608afcf2 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -21,6 +21,19 @@ config AD_SIGMA_DELTA
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 
+config AD4130
+	tristate "Analog Device AD4130 ADC Driver"
+	depends on SPI
+	select IIO_BUFFER
+	select IIO_KFIFO_BUF
+	select REGMAP_SPI
+	help
+	  Say yes here to build support for Analog Devices AD4130-8 SPI analog
+	  to digital converters (ADC).
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ad4130.
+
 config AD7091R5
 	tristate "Analog Devices AD7091R5 ADC Driver"
 	depends on I2C
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 39d806f6d457..c3aa7e4eca2f 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -6,6 +6,7 @@
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o
 obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o
+obj-$(CONFIG_AD4130) += ad4130.o
 obj-$(CONFIG_AD7091R5) += ad7091r5.o ad7091r-base.o
 obj-$(CONFIG_AD7124) += ad7124.o
 obj-$(CONFIG_AD7192) += ad7192.o
diff --git a/drivers/iio/adc/ad4130.c b/drivers/iio/adc/ad4130.c
new file mode 100644
index 000000000000..dd2f18734cba
--- /dev/null
+++ b/drivers/iio/adc/ad4130.c
@@ -0,0 +1,2078 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 Analog Devices, Inc.
+ * Author: Cosmin Tanislav <cosmin.tanislav@analog.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+#include <linux/units.h>
+
+#include <asm/div64.h>
+#include <asm/unaligned.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/sysfs.h>
+
+#define AD4130_8_NAME			"ad4130-8"
+
+#define AD4130_COMMS_READ_MASK		BIT(6)
+
+#define AD4130_REG_STATUS		0x00
+#define AD4130_STATUS_POR_FLAG_MASK	BIT(4)
+
+#define AD4130_REG_ADC_CONTROL		0x01
+#define AD4130_BIPOLAR_MASK		BIT(14)
+#define AD4130_INT_REF_VAL_MASK		BIT(13)
+#define AD4130_INT_REF_2_5V		2500000
+#define AD4130_INT_REF_1_25V		1250000
+#define AD4130_CSB_EN_MASK		BIT(9)
+#define AD4130_INT_REF_EN_MASK		BIT(8)
+#define AD4130_MODE_MASK		GENMASK(5, 2)
+#define AD4130_MCLK_SEL_MASK		GENMASK(1, 0)
+
+#define AD4130_REG_DATA			0x02
+
+#define AD4130_REG_IO_CONTROL		0x03
+#define AD4130_INT_PIN_SEL_MASK		GENMASK(9, 8)
+#define AD4130_GPIO_DATA_MASK		GENMASK(7, 4)
+#define AD4130_GPIO_CTRL_MASK		GENMASK(3, 0)
+
+#define AD4130_REG_VBIAS		0x04
+
+#define AD4130_REG_ID			0x05
+
+#define AD4130_REG_ERROR		0x06
+
+#define AD4130_REG_ERROR_EN		0x07
+
+#define AD4130_REG_CHANNEL_X(x)		(0x09 + (x))
+#define AD4130_CHANNEL_EN_MASK		BIT(23)
+#define AD4130_SETUP_MASK		GENMASK(22, 20)
+#define AD4130_AINP_MASK		GENMASK(17, 13)
+#define AD4130_AINM_MASK		GENMASK(12, 8)
+#define AD4130_IOUT1_MASK		GENMASK(7, 4)
+#define AD4130_IOUT2_MASK		GENMASK(3, 0)
+
+#define AD4130_REG_CONFIG_X(x)		(0x19 + (x))
+#define AD4130_IOUT1_VAL_MASK		GENMASK(15, 13)
+#define AD4130_IOUT2_VAL_MASK		GENMASK(12, 10)
+#define AD4130_BURNOUT_MASK		GENMASK(9, 8)
+#define AD4130_REF_BUFP_MASK		BIT(7)
+#define AD4130_REF_BUFM_MASK		BIT(6)
+#define AD4130_REF_SEL_MASK		GENMASK(5, 4)
+#define AD4130_PGA_MASK			GENMASK(3, 1)
+#define AD4130_PGA_NUM			8
+
+#define AD4130_REG_FILTER_X(x)		(0x21 + (x))
+#define AD4130_FILTER_MODE_MASK		GENMASK(15, 12)
+#define AD4130_FILTER_SELECT_MASK	GENMASK(10, 0)
+#define AD4130_FS_MIN			1
+#define AD4130_MAX_ODR			2400
+
+#define AD4130_REG_FIFO_CONTROL		0x3a
+#define AD4130_ADD_FIFO_HEADER_MASK	BIT(18)
+#define AD4130_FIFO_MODE_MASK		GENMASK(17, 16)
+#define AD4130_WATERMARK_INT_EN_MASK	BIT(9)
+#define AD4130_WATERMARK_MASK		GENMASK(7, 0)
+#define AD4130_WATERMARK_256		0
+
+#define AD4130_REG_FIFO_STATUS		0x3b
+
+#define AD4130_REG_FIFO_DATA		0x3d
+#define AD4130_FIFO_SIZE		256
+#define AD4130_FIFO_MAX_SAMPLE_SIZE	3
+
+#define AD4130_MAX_GPIOS		4
+#define AD4130_MAX_SETUPS		8
+#define AD4130_MAX_CHANNELS		16
+#define AD4130_MAX_ANALOG_PINS		16
+#define AD4130_MAX_DIFF_INPUTS		30
+
+#define AD4130_AIN2_P1			0x2
+#define AD4130_AIN3_P2			0x3
+
+#define AD4130_MCLK_FREQ_76_8KHZ	76800
+#define AD4130_MCLK_FREQ_153_6KHZ	153600
+
+#define AD4130_RESET_BUF_SIZE		8
+
+#define AD4130_SOFT_RESET_SLEEP_US	(160 * MICRO / AD4130_MCLK_FREQ_76_8KHZ)
+
+#define AD4130_INVALID_SLOT		-1
+
+static const unsigned int ad4130_reg_size[] = {
+	[AD4130_REG_STATUS] = 1,
+	[AD4130_REG_ADC_CONTROL] = 2,
+	[AD4130_REG_IO_CONTROL] = 2,
+	[AD4130_REG_VBIAS] = 2,
+	[AD4130_REG_ID] = 1,
+	[AD4130_REG_ERROR] = 2,
+	[AD4130_REG_ERROR_EN] = 2,
+	[AD4130_REG_CHANNEL_X(0) ...
+	 AD4130_REG_CHANNEL_X(AD4130_MAX_CHANNELS)] = 3,
+	[AD4130_REG_CONFIG_X(0) ...
+	 AD4130_REG_CONFIG_X(AD4130_MAX_SETUPS)] = 2,
+	[AD4130_REG_FILTER_X(0) ...
+	 AD4130_REG_FILTER_X(AD4130_MAX_SETUPS)] = 3,
+	[AD4130_REG_FIFO_CONTROL] = 3,
+	[AD4130_REG_FIFO_STATUS] = 1,
+};
+
+enum ad4130_id {
+	ID_AD4130_8_24_WLCSP,
+	ID_AD4130_8_24_LFCSP,
+	ID_AD4130_8_16_WLCSP,
+	ID_AD4130_8_16_LFCSP,
+};
+
+enum ad4130_int_ref_val {
+	AD4130_INT_REF_VAL_2_5V,
+	AD4130_INT_REF_VAL_1_25V,
+};
+
+enum ad4130_mclk_sel {
+	AD4130_MCLK_76_8KHZ,
+	AD4130_MCLK_76_8KHZ_OUT,
+	AD4130_MCLK_76_8KHZ_EXT,
+	AD4130_MCLK_153_6KHZ_EXT,
+	AD4130_MCLK_SEL_MAX
+};
+
+enum ad4130_int_pin_sel {
+	AD4130_INT_PIN_DOUT_OR_INT,
+	AD4130_INT_PIN_CLK,
+	AD4130_INT_PIN_P2,
+	AD4130_INT_PIN_DOUT,
+};
+
+enum ad4130_iout {
+	AD4130_IOUT_OFF,
+	AD4130_IOUT_10000NA,
+	AD4130_IOUT_20000NA,
+	AD4130_IOUT_50000NA,
+	AD4130_IOUT_100000NA,
+	AD4130_IOUT_150000NA,
+	AD4130_IOUT_200000NA,
+	AD4130_IOUT_100NA,
+	AD4130_IOUT_MAX,
+};
+
+enum ad4130_burnout {
+	AD4130_BURNOUT_OFF,
+	AD4130_BURNOUT_500NA,
+	AD4130_BURNOUT_2000NA,
+	AD4130_BURNOUT_4000NA,
+	AD4130_BURNOUT_MAX
+};
+
+enum ad4130_ref_sel {
+	AD4130_REF_REFIN1,
+	AD4130_REF_REFIN2,
+	AD4130_REF_REFOUT_AVSS,
+	AD4130_REF_AVDD_AVSS,
+	AD4130_REF_SEL_MAX
+};
+
+enum ad4130_fifo_mode {
+	AD4130_FIFO_MODE_DISABLED = 0b00,
+	AD4130_FIFO_MODE_WATERMARK = 0b01,
+};
+
+enum ad4130_mode {
+	AD4130_MODE_CONTINUOUS = 0b0000,
+	AD4130_MODE_IDLE = 0b0100,
+};
+
+enum ad4130_filter_mode {
+	AD4130_FILTER_SINC4,
+	AD4130_FILTER_SINC4_SINC1,
+	AD4130_FILTER_SINC3,
+	AD4130_FILTER_SINC3_REJ60,
+	AD4130_FILTER_SINC3_SINC1,
+	AD4130_FILTER_SINC3_PF1,
+	AD4130_FILTER_SINC3_PF2,
+	AD4130_FILTER_SINC3_PF3,
+	AD4130_FILTER_SINC3_PF4,
+};
+
+enum ad4130_pin_function {
+	AD4130_PIN_FN_NONE,
+	AD4130_PIN_FN_SPECIAL = BIT(0),
+	AD4130_PIN_FN_DIFF = BIT(1),
+	AD4130_PIN_FN_EXCITATION = BIT(2),
+	AD4130_PIN_FN_VBIAS = BIT(3),
+};
+
+struct ad4130_chip_info {
+	const char	*name;
+	u8		resolution;
+	bool		has_int_pin;
+};
+
+struct ad4130_setup_info {
+	unsigned int			iout0_val;
+	unsigned int			iout1_val;
+	unsigned int			burnout;
+	unsigned int			pga;
+	unsigned int			fs;
+	bool				ref_bufp;
+	bool				ref_bufm;
+	u32				ref_sel;
+	enum ad4130_filter_mode		filter_mode;
+};
+
+struct ad4130_slot_info {
+	struct ad4130_setup_info	setup;
+	unsigned int			enabled_channels;
+	unsigned int			channels;
+};
+
+struct ad4130_chan_info {
+	struct ad4130_setup_info	setup;
+	u32				iout0;
+	u32				iout1;
+	int				slot;
+	bool				enabled;
+	bool				initialized;
+};
+
+struct ad4130_filter_config {
+	enum ad4130_filter_mode		filter_mode;
+	unsigned int			odr_div;
+	unsigned int			fs_max;
+	unsigned int			db3_div;
+	enum iio_available_type		samp_freq_avail_type;
+	int				samp_freq_avail_len;
+	int				samp_freq_avail[3][2];
+	enum iio_available_type		db3_freq_avail_type;
+	int				db3_freq_avail_len;
+	int				db3_freq_avail[3][2];
+};
+
+struct ad4130_state {
+	const struct ad4130_chip_info	*chip_info;
+	struct spi_device		*spi;
+	struct regmap			*regmap;
+	struct clk			*mclk;
+	struct regulator_bulk_data	regulators[4];
+	u32				irq_trigger;
+	u32				inv_irq_trigger;
+
+	/*
+	 * Synchronize access to members of driver state, and ensure atomicity
+	 * of consecutive regmap operations.
+	 */
+	struct mutex			lock;
+	struct completion		completion;
+
+	struct iio_chan_spec		chans[AD4130_MAX_CHANNELS];
+	struct ad4130_chan_info		chans_info[AD4130_MAX_CHANNELS];
+	struct ad4130_slot_info		slots_info[AD4130_MAX_SETUPS];
+	enum ad4130_pin_function	pins_fn[AD4130_MAX_ANALOG_PINS];
+	u32				vbias_pins[AD4130_MAX_ANALOG_PINS];
+	u32				num_vbias_pins;
+	int				scale_tbls[AD4130_REF_SEL_MAX][AD4130_PGA_NUM][2];
+	struct gpio_chip		gc;
+	unsigned int			gpio_offsets[AD4130_MAX_GPIOS];
+	unsigned int			num_gpios;
+
+	u32			int_pin_sel;
+	u32			int_ref_uv;
+	u32			mclk_sel;
+	bool			int_ref_en;
+	bool			bipolar;
+
+	unsigned int		num_enabled_channels;
+	unsigned int		effective_watermark;
+	unsigned int		watermark;
+
+	struct spi_message	fifo_msg;
+	struct spi_transfer	fifo_xfer[2];
+
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	u8			reset_buf[AD4130_RESET_BUF_SIZE] ____cacheline_aligned;
+	u8			reg_write_tx_buf[4];
+	u8			reg_read_tx_buf[1];
+	u8			reg_read_rx_buf[3];
+	u8			fifo_tx_buf[2];
+	u8			fifo_rx_buf[AD4130_FIFO_SIZE *
+					    AD4130_FIFO_MAX_SAMPLE_SIZE];
+};
+
+static const char * const ad4130_int_pin_names[] = {
+	[AD4130_INT_PIN_DOUT_OR_INT] = "dout-int",
+	[AD4130_INT_PIN_CLK] = "clk",
+	[AD4130_INT_PIN_P2] = "p2",
+	[AD4130_INT_PIN_DOUT] = "dout",
+};
+
+static const unsigned int ad4130_iout_current_na_tbl[AD4130_IOUT_MAX] = {
+	[AD4130_IOUT_OFF] = 0,
+	[AD4130_IOUT_100NA] = 100,
+	[AD4130_IOUT_10000NA] = 10000,
+	[AD4130_IOUT_20000NA] = 20000,
+	[AD4130_IOUT_50000NA] = 50000,
+	[AD4130_IOUT_100000NA] = 100000,
+	[AD4130_IOUT_150000NA] = 150000,
+	[AD4130_IOUT_200000NA] = 200000,
+};
+
+static const unsigned int ad4130_burnout_current_na_tbl[AD4130_BURNOUT_MAX] = {
+	[AD4130_BURNOUT_OFF] = 0,
+	[AD4130_BURNOUT_500NA] = 500,
+	[AD4130_BURNOUT_2000NA] = 2000,
+	[AD4130_BURNOUT_4000NA] = 4000,
+};
+
+#define AD4130_VARIABLE_ODR_CONFIG(_filter_mode, _odr_div, _fs_max, _db3_div)	\
+{										\
+		.filter_mode = (_filter_mode),					\
+		.odr_div = (_odr_div),						\
+		.fs_max = (_fs_max),						\
+		.db3_div = (_db3_div),						\
+		.samp_freq_avail_type = IIO_AVAIL_RANGE,			\
+		.samp_freq_avail = {						\
+			{ AD4130_MAX_ODR, (_odr_div) * (_fs_max) },		\
+			{ AD4130_MAX_ODR, (_odr_div) * (_fs_max) },		\
+			{ AD4130_MAX_ODR, (_odr_div) },				\
+		},								\
+		.db3_freq_avail_type = IIO_AVAIL_RANGE,				\
+		.db3_freq_avail = {						\
+			{							\
+				AD4130_MAX_ODR * (_db3_div),			\
+				(_odr_div) * (_fs_max) * MILLI,			\
+			},							\
+			{							\
+				AD4130_MAX_ODR * (_db3_div),			\
+				(_odr_div) * (_fs_max) * MILLI,			\
+			},							\
+			{							\
+				AD4130_MAX_ODR * (_db3_div),			\
+				(_odr_div) * MILLI,				\
+			},							\
+		},								\
+}
+
+#define AD4130_FIXED_ODR_CONFIG(_filter_mode, _odr_div, _db3_div)	\
+{									\
+		.filter_mode = (_filter_mode),				\
+		.odr_div = (_odr_div),					\
+		.fs_max = AD4130_FS_MIN,				\
+		.db3_div = (_db3_div),					\
+		.samp_freq_avail_type = IIO_AVAIL_LIST,			\
+		.samp_freq_avail_len = 1,				\
+		.samp_freq_avail = {					\
+			{ AD4130_MAX_ODR, (_odr_div) },			\
+		},							\
+		.db3_freq_avail_type = IIO_AVAIL_LIST,			\
+		.db3_freq_avail_len = 1,				\
+		.db3_freq_avail = {					\
+			{						\
+				AD4130_MAX_ODR * MILLI,			\
+				(_odr_div) * (_db3_div),		\
+			},						\
+		},							\
+}
+
+static const struct ad4130_filter_config ad4130_filter_configs[] = {
+	AD4130_VARIABLE_ODR_CONFIG(AD4130_FILTER_SINC4,       1,  10,   234),
+	AD4130_VARIABLE_ODR_CONFIG(AD4130_FILTER_SINC4_SINC1, 11, 10,   590),
+	AD4130_VARIABLE_ODR_CONFIG(AD4130_FILTER_SINC3,       1,  2047, 268),
+	AD4130_VARIABLE_ODR_CONFIG(AD4130_FILTER_SINC3_REJ60, 1,  2047, 268),
+	AD4130_VARIABLE_ODR_CONFIG(AD4130_FILTER_SINC3_SINC1, 10, 2047, 545),
+	AD4130_FIXED_ODR_CONFIG(AD4130_FILTER_SINC3_PF1,      92,       675),
+	AD4130_FIXED_ODR_CONFIG(AD4130_FILTER_SINC3_PF2,      100,      675),
+	AD4130_FIXED_ODR_CONFIG(AD4130_FILTER_SINC3_PF3,      124,      675),
+	AD4130_FIXED_ODR_CONFIG(AD4130_FILTER_SINC3_PF4,      148,      675),
+};
+
+static const char * const ad4130_filter_modes_str[] = {
+	[AD4130_FILTER_SINC4] = "sinc4",
+	[AD4130_FILTER_SINC4_SINC1] = "sinc4+sinc1",
+	[AD4130_FILTER_SINC3] = "sinc3",
+	[AD4130_FILTER_SINC3_REJ60] = "sinc3+rej60",
+	[AD4130_FILTER_SINC3_SINC1] = "sinc3+sinc1",
+	[AD4130_FILTER_SINC3_PF1] = "sinc3+pf1",
+	[AD4130_FILTER_SINC3_PF2] = "sinc3+pf2",
+	[AD4130_FILTER_SINC3_PF3] = "sinc3+pf3",
+	[AD4130_FILTER_SINC3_PF4] = "sinc3+pf4",
+};
+
+static unsigned int ad4130_data_reg_size(struct ad4130_state *st)
+{
+	return st->chip_info->resolution / 8;
+}
+
+static int ad4130_get_reg_size(struct ad4130_state *st, unsigned int reg,
+			       unsigned int *size)
+{
+	if (reg >= ARRAY_SIZE(ad4130_reg_size))
+		return -EINVAL;
+
+	if (reg == AD4130_REG_DATA) {
+		*size = ad4130_data_reg_size(st);
+		return 0;
+	}
+
+	*size = ad4130_reg_size[reg];
+	if (!*size)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int ad4130_reg_write(void *context, unsigned int reg, unsigned int val)
+{
+	struct ad4130_state *st = context;
+	unsigned int size;
+	int ret;
+
+	ret = ad4130_get_reg_size(st, reg, &size);
+	if (ret)
+		return ret;
+
+	st->reg_write_tx_buf[0] = reg;
+
+	switch (size) {
+	case 3:
+		put_unaligned_be24(val, &st->reg_write_tx_buf[1]);
+		break;
+	case 2:
+		put_unaligned_be16(val, &st->reg_write_tx_buf[1]);
+		break;
+	case 1:
+		st->reg_write_tx_buf[1] = val;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return spi_write(st->spi, st->reg_write_tx_buf, size + 1);
+}
+
+static int ad4130_reg_read(void *context, unsigned int reg, unsigned int *val)
+{
+	struct ad4130_state *st = context;
+	struct spi_transfer t[] = {
+		{
+			.tx_buf = st->reg_read_tx_buf,
+			.len = sizeof(st->reg_read_tx_buf),
+		},
+		{
+			.rx_buf = st->reg_read_rx_buf,
+		},
+	};
+	unsigned int size;
+	int ret;
+
+	ret = ad4130_get_reg_size(st, reg, &size);
+	if (ret)
+		return ret;
+
+	st->reg_read_tx_buf[0] = AD4130_COMMS_READ_MASK | reg;
+	t[1].len = size;
+
+	ret = spi_sync_transfer(st->spi, t, ARRAY_SIZE(t));
+	if (ret)
+		return ret;
+
+	switch (size) {
+	case 3:
+		*val = get_unaligned_be24(st->reg_read_rx_buf);
+		break;
+	case 2:
+		*val = get_unaligned_be16(st->reg_read_rx_buf);
+		break;
+	case 1:
+		*val = st->reg_read_rx_buf[0];
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return 0;
+}
+
+static const struct regmap_config ad4130_regmap_config = {
+	.reg_read = ad4130_reg_read,
+	.reg_write = ad4130_reg_write,
+};
+
+static int ad4130_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
+{
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static void ad4130_gpio_set(struct gpio_chip *gc, unsigned int offset,
+			    int value)
+{
+	struct ad4130_state *st = gpiochip_get_data(gc);
+	unsigned int real_offset = st->gpio_offsets[offset];
+	unsigned int mask = FIELD_PREP(AD4130_GPIO_DATA_MASK, BIT(real_offset));
+
+	regmap_update_bits(st->regmap, AD4130_REG_IO_CONTROL, mask,
+			   value ? mask : 0);
+}
+
+static int ad4130_set_mode(struct ad4130_state *st, enum ad4130_mode mode)
+{
+	return regmap_update_bits(st->regmap, AD4130_REG_ADC_CONTROL,
+				  AD4130_MODE_MASK,
+				  FIELD_PREP(AD4130_MODE_MASK, mode));
+}
+
+static int ad4130_set_watermark_interrupt_en(struct ad4130_state *st, bool en)
+{
+	unsigned int mask = AD4130_WATERMARK_INT_EN_MASK;
+
+	return regmap_update_bits(st->regmap, AD4130_REG_FIFO_CONTROL,
+				  mask, en ? mask : 0);
+}
+
+static unsigned int ad4130_watermark_reg_val(unsigned int val)
+{
+	if (val == AD4130_FIFO_SIZE)
+		val = AD4130_WATERMARK_256;
+
+	return val;
+}
+
+static int ad4130_set_fifo_mode(struct ad4130_state *st,
+				enum ad4130_fifo_mode mode)
+{
+	return regmap_update_bits(st->regmap, AD4130_REG_FIFO_CONTROL,
+				  AD4130_FIFO_MODE_MASK,
+				  FIELD_PREP(AD4130_FIFO_MODE_MASK, mode));
+}
+
+static void ad4130_push_fifo_data(struct iio_dev *indio_dev)
+{
+	struct ad4130_state *st = iio_priv(indio_dev);
+	unsigned int data_reg_size = ad4130_data_reg_size(st);
+	unsigned int transfer_len = st->effective_watermark * data_reg_size;
+	unsigned int set_size = st->num_enabled_channels * data_reg_size;
+	unsigned int i;
+	int ret;
+
+	st->fifo_tx_buf[1] = ad4130_watermark_reg_val(st->effective_watermark);
+	st->fifo_xfer[1].len = transfer_len;
+
+	ret = spi_sync(st->spi, &st->fifo_msg);
+	if (ret)
+		return;
+
+	for (i = 0; i < transfer_len; i += set_size)
+		iio_push_to_buffers(indio_dev, &st->fifo_rx_buf[i]);
+}
+
+static irqreturn_t ad4130_irq_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct ad4130_state *st = iio_priv(indio_dev);
+
+	if (iio_buffer_enabled(indio_dev))
+		ad4130_push_fifo_data(indio_dev);
+	else
+		complete(&st->completion);
+
+	return IRQ_HANDLED;
+}
+
+static int ad4130_find_slot(struct ad4130_state *st,
+			    struct ad4130_setup_info *target_setup_info,
+			    unsigned int *slot, bool *overwrite)
+{
+	unsigned int i;
+
+	*slot = AD4130_INVALID_SLOT;
+	*overwrite = false;
+
+	for (i = 0; i < AD4130_MAX_SETUPS; i++) {
+		struct ad4130_slot_info *slot_info = &st->slots_info[i];
+
+		/* Immediately accept a matching setup info. */
+		if (!memcmp(target_setup_info, &slot_info->setup,
+			    sizeof(*target_setup_info))) {
+			*slot = i;
+			return 0;
+		}
+
+		/* Ignore all setups which are used by enabled channels. */
+		if (slot_info->enabled_channels)
+			continue;
+
+		/* Find the least used slot. */
+		if (*slot == AD4130_INVALID_SLOT ||
+		    slot_info->channels < st->slots_info[*slot].channels)
+			*slot = i;
+	}
+
+	if (*slot == AD4130_INVALID_SLOT)
+		return -EINVAL;
+
+	*overwrite = true;
+
+	return 0;
+}
+
+static void ad4130_unlink_channel(struct ad4130_state *st, unsigned int channel)
+{
+	struct ad4130_chan_info *chan_info = &st->chans_info[channel];
+	struct ad4130_slot_info *slot_info = &st->slots_info[chan_info->slot];
+
+	chan_info->slot = AD4130_INVALID_SLOT;
+	slot_info->channels--;
+}
+
+static int ad4130_unlink_slot(struct ad4130_state *st, unsigned int slot)
+{
+	unsigned int i;
+
+	for (i = 0; i < AD4130_MAX_CHANNELS; i++) {
+		struct ad4130_chan_info *chan_info = &st->chans_info[i];
+
+		if (!chan_info->initialized || chan_info->slot != slot)
+			continue;
+
+		ad4130_unlink_channel(st, i);
+	}
+
+	return 0;
+}
+
+static int ad4130_link_channel_slot(struct ad4130_state *st,
+				    unsigned int channel, unsigned int slot)
+{
+	struct ad4130_slot_info *slot_info = &st->slots_info[slot];
+	struct ad4130_chan_info *chan_info = &st->chans_info[channel];
+	int ret;
+
+	ret = regmap_update_bits(st->regmap, AD4130_REG_CHANNEL_X(channel),
+				 AD4130_SETUP_MASK,
+				 FIELD_PREP(AD4130_SETUP_MASK, slot));
+	if (ret)
+		return ret;
+
+	chan_info->slot = slot;
+	slot_info->channels++;
+
+	return 0;
+}
+
+static int ad4130_write_slot_setup(struct ad4130_state *st,
+				   unsigned int slot,
+				   struct ad4130_setup_info *setup_info)
+{
+	unsigned int val;
+	int ret;
+
+	val = FIELD_PREP(AD4130_IOUT1_VAL_MASK, setup_info->iout0_val) |
+	      FIELD_PREP(AD4130_IOUT1_VAL_MASK, setup_info->iout1_val) |
+	      FIELD_PREP(AD4130_BURNOUT_MASK, setup_info->burnout) |
+	      FIELD_PREP(AD4130_REF_BUFP_MASK, setup_info->ref_bufp) |
+	      FIELD_PREP(AD4130_REF_BUFM_MASK, setup_info->ref_bufm) |
+	      FIELD_PREP(AD4130_REF_SEL_MASK, setup_info->ref_sel) |
+	      FIELD_PREP(AD4130_PGA_MASK, setup_info->pga);
+
+	ret = regmap_write(st->regmap, AD4130_REG_CONFIG_X(slot), val);
+	if (ret)
+		return ret;
+
+	val = FIELD_PREP(AD4130_FILTER_MODE_MASK, setup_info->filter_mode) |
+	      FIELD_PREP(AD4130_FILTER_SELECT_MASK, setup_info->fs);
+
+	ret = regmap_write(st->regmap, AD4130_REG_FILTER_X(slot), val);
+	if (ret)
+		return ret;
+
+	memcpy(&st->slots_info[slot].setup, setup_info, sizeof(*setup_info));
+
+	return 0;
+}
+
+static int ad4130_write_channel_setup(struct ad4130_state *st,
+				      unsigned int channel, bool on_enable)
+{
+	struct ad4130_chan_info *chan_info = &st->chans_info[channel];
+	struct ad4130_setup_info *setup_info = &chan_info->setup;
+	bool overwrite;
+	int slot;
+	int ret;
+
+	/*
+	 * The following cases need to be handled.
+	 *
+	 * 1. Enabled and linked channel with setup changes:
+	 *    - Find slot. If not possible, return error.
+	 *    - Unlink channel from current slot.
+	 *    - If slot has channels linked to it, unlink all channels, and
+	 *      write the new setup to it.
+	 *    - Link channel to new slot.
+	 *
+	 * 2. Soon to be enabled and unlinked channel:
+	 *    - Find slot. If not possible, return error.
+	 *    - If slot has channels linked to it, unlink all channels, and
+	 *      write the new setup to it.
+	 *    - Link channel to slot.
+	 *
+	 * 3. Disabled and linked channel with setup changes:
+	 *    - Unlink channel from current slot.
+	 *
+	 * 4. Soon to be enabled and linked channel:
+	 * 5. Disabled and unlinked channel with setup changes:
+	 *    - Do nothing.
+	 */
+
+	/* Case 4 */
+	if (on_enable && chan_info->slot != AD4130_INVALID_SLOT)
+		return 0;
+
+	if (!on_enable && !chan_info->enabled) {
+		if (chan_info->slot != AD4130_INVALID_SLOT)
+			/* Case 3 */
+			ad4130_unlink_channel(st, channel);
+
+		/* Case 3 & 5 */
+		return 0;
+	}
+
+	/* Case 1 & 2 */
+	ret = ad4130_find_slot(st, setup_info, &slot, &overwrite);
+	if (ret)
+		return ret;
+
+	if (chan_info->slot != AD4130_INVALID_SLOT)
+		/* Case 1 only */
+		ad4130_unlink_channel(st, channel);
+
+	if (overwrite) {
+		ret = ad4130_unlink_slot(st, slot);
+		if (ret)
+			return ret;
+
+		ret = ad4130_write_slot_setup(st, slot, setup_info);
+		if (ret)
+			return ret;
+	}
+
+	return ad4130_link_channel_slot(st, channel, slot);
+}
+
+static int ad4130_set_channel_enable(struct ad4130_state *st,
+				     unsigned int channel, bool status)
+{
+	struct ad4130_chan_info *chan_info = &st->chans_info[channel];
+	struct ad4130_slot_info *slot_info;
+	unsigned int mask = AD4130_CHANNEL_EN_MASK;
+	int ret;
+
+	if (chan_info->enabled == status)
+		return 0;
+
+	if (status) {
+		ret = ad4130_write_channel_setup(st, channel, true);
+		if (ret)
+			return ret;
+	}
+
+	slot_info = &st->slots_info[chan_info->slot];
+
+	ret = regmap_update_bits(st->regmap, AD4130_REG_CHANNEL_X(channel),
+				 mask, status ? mask : 0);
+	if (ret)
+		return ret;
+
+	slot_info->enabled_channels += status ? 1 : -1;
+	chan_info->enabled = status;
+
+	return 0;
+}
+
+static void ad4130_freq_to_fs(enum ad4130_filter_mode filter_mode,
+			      int val, int val2, unsigned int *fs, bool db3)
+{
+	const struct ad4130_filter_config *filter_config =
+		&ad4130_filter_configs[filter_mode];
+	u64 dividend, divisor;
+	int temp;
+
+	dividend = filter_config->fs_max * filter_config->odr_div *
+		   ((u64)val * NANO + val2);
+	divisor = (u64)AD4130_MAX_ODR * NANO;
+
+	if (db3) {
+		dividend *= MILLI;
+		divisor *= filter_config->db3_div;
+	}
+
+	temp = AD4130_FS_MIN + filter_config->fs_max -
+	       DIV64_U64_ROUND_CLOSEST(dividend, divisor);
+
+	if (temp < AD4130_FS_MIN)
+		temp = AD4130_FS_MIN;
+	else if (temp > filter_config->fs_max)
+		temp = filter_config->fs_max;
+
+	*fs = temp;
+}
+
+static void ad4130_fs_to_freq(enum ad4130_filter_mode filter_mode,
+			      unsigned int fs, int *val, int *val2, bool db3)
+{
+	const struct ad4130_filter_config *filter_config =
+		&ad4130_filter_configs[filter_mode];
+	unsigned int dividend, divisor;
+	u64 temp;
+
+	dividend = (filter_config->fs_max - fs + AD4130_FS_MIN) *
+		   AD4130_MAX_ODR;
+	divisor = filter_config->fs_max * filter_config->odr_div;
+
+	if (db3) {
+		dividend *= filter_config->db3_div;
+		divisor *= MILLI;
+	}
+
+	temp = div_u64((u64)dividend * NANO, divisor);
+	*val = div_u64_rem(temp, NANO, val2);
+}
+
+static int ad4130_set_filter_mode(struct iio_dev *indio_dev,
+				  const struct iio_chan_spec *chan,
+				  unsigned int val)
+{
+	struct ad4130_state *st = iio_priv(indio_dev);
+	unsigned int channel = chan->scan_index;
+	struct ad4130_chan_info *chan_info = &st->chans_info[channel];
+	struct ad4130_setup_info *setup_info = &chan_info->setup;
+	enum ad4130_filter_mode old_filter_mode;
+	int freq_val, freq_val2;
+	unsigned int old_fs;
+	int ret = 0;
+
+	mutex_lock(&st->lock);
+	if (setup_info->filter_mode == val)
+		goto out;
+
+	old_fs = setup_info->fs;
+	old_filter_mode = setup_info->filter_mode;
+
+	ad4130_fs_to_freq(setup_info->filter_mode, setup_info->fs,
+			  &freq_val, &freq_val2, false);
+
+	ad4130_freq_to_fs(val, freq_val, freq_val2, &setup_info->fs, false);
+
+	setup_info->filter_mode = val;
+
+	ret = ad4130_write_channel_setup(st, channel, false);
+	if (ret) {
+		setup_info->fs = old_fs;
+		setup_info->filter_mode = old_filter_mode;
+	}
+
+ out:
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static int ad4130_get_filter_mode(struct iio_dev *indio_dev,
+				  const struct iio_chan_spec *chan)
+{
+	struct ad4130_state *st = iio_priv(indio_dev);
+	unsigned int channel = chan->scan_index;
+	struct ad4130_setup_info *setup_info = &st->chans_info[channel].setup;
+	enum ad4130_filter_mode filter_mode;
+
+	mutex_lock(&st->lock);
+	filter_mode = setup_info->filter_mode;
+	mutex_unlock(&st->lock);
+
+	return filter_mode;
+}
+
+static const struct iio_enum ad4130_filter_mode_enum = {
+	.items = ad4130_filter_modes_str,
+	.num_items = ARRAY_SIZE(ad4130_filter_modes_str),
+	.set = ad4130_set_filter_mode,
+	.get = ad4130_get_filter_mode,
+};
+
+static const struct iio_chan_spec_ext_info ad4130_filter_mode_ext_info[] = {
+	IIO_ENUM("filter_mode", IIO_SEPARATE, &ad4130_filter_mode_enum),
+	IIO_ENUM_AVAILABLE("filter_mode", IIO_SHARED_BY_TYPE,
+			   &ad4130_filter_mode_enum),
+	{ }
+};
+
+static const struct iio_chan_spec ad4130_channel_template = {
+	.type = IIO_VOLTAGE,
+	.indexed = 1,
+	.differential = 1,
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			      BIT(IIO_CHAN_INFO_SCALE) |
+			      BIT(IIO_CHAN_INFO_OFFSET) |
+			      BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+			      BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+	.info_mask_separate_available = BIT(IIO_CHAN_INFO_SCALE) |
+					BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+					BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+	.ext_info = ad4130_filter_mode_ext_info,
+	.scan_type = {
+		.sign = 'u',
+		.endianness = IIO_BE,
+	},
+};
+
+static int ad4130_set_channel_pga(struct ad4130_state *st, unsigned int channel,
+				  int val, int val2)
+{
+	struct ad4130_chan_info *chan_info = &st->chans_info[channel];
+	struct ad4130_setup_info *setup_info = &chan_info->setup;
+	unsigned int pga, old_pga;
+	int ret = 0;
+
+	for (pga = 0; pga < AD4130_PGA_NUM; pga++)
+		if (val == st->scale_tbls[setup_info->ref_sel][pga][0] &&
+		    val2 == st->scale_tbls[setup_info->ref_sel][pga][1])
+			break;
+
+	if (pga == AD4130_PGA_NUM)
+		return -EINVAL;
+
+	mutex_lock(&st->lock);
+	if (pga == setup_info->pga)
+		goto out;
+
+	old_pga = setup_info->pga;
+	setup_info->pga = pga;
+
+	ret = ad4130_write_channel_setup(st, channel, false);
+	if (ret)
+		setup_info->pga = old_pga;
+
+out:
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static int ad4130_set_channel_freq(struct ad4130_state *st,
+				   unsigned int channel,
+				   int val, int val2, bool db3)
+{
+	struct ad4130_chan_info *chan_info = &st->chans_info[channel];
+	struct ad4130_setup_info *setup_info = &chan_info->setup;
+	unsigned int fs, old_fs;
+	int ret = 0;
+
+	mutex_lock(&st->lock);
+	old_fs = setup_info->fs;
+
+	ad4130_freq_to_fs(setup_info->filter_mode, val, val2, &fs, db3);
+
+	if (fs == setup_info->fs)
+		goto out;
+
+	setup_info->fs = fs;
+
+	ret = ad4130_write_channel_setup(st, channel, false);
+	if (ret)
+		setup_info->fs = old_fs;
+
+out:
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static int _ad4130_read_sample(struct iio_dev *indio_dev, unsigned int channel,
+			       int *val)
+{
+	struct ad4130_state *st = iio_priv(indio_dev);
+	int ret;
+
+	ret = ad4130_set_channel_enable(st, channel, true);
+	if (ret)
+		return ret;
+
+	reinit_completion(&st->completion);
+
+	ret = ad4130_set_mode(st, AD4130_MODE_CONTINUOUS);
+	if (ret)
+		return ret;
+
+	ret = wait_for_completion_timeout(&st->completion,
+					  msecs_to_jiffies(1000));
+	if (!ret)
+		return -ETIMEDOUT;
+
+	ret = ad4130_set_mode(st, AD4130_MODE_IDLE);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(st->regmap, AD4130_REG_DATA, val);
+	if (ret)
+		return ret;
+
+	ret = ad4130_set_channel_enable(st, channel, false);
+	if (ret)
+		return ret;
+
+	return IIO_VAL_INT;
+}
+
+static int ad4130_read_sample(struct iio_dev *indio_dev, unsigned int channel,
+			      int *val)
+{
+	struct ad4130_state *st = iio_priv(indio_dev);
+	int ret;
+
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
+
+	mutex_lock(&st->lock);
+	ret = _ad4130_read_sample(indio_dev, channel, val);
+	mutex_unlock(&st->lock);
+
+	iio_device_release_direct_mode(indio_dev);
+
+	return ret;
+}
+
+static int ad4130_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long info)
+{
+	struct ad4130_state *st = iio_priv(indio_dev);
+	unsigned int channel = chan->scan_index;
+	struct ad4130_setup_info *setup_info = &st->chans_info[channel].setup;
+
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		return ad4130_read_sample(indio_dev, channel, val);
+	case IIO_CHAN_INFO_SCALE:
+		mutex_lock(&st->lock);
+		*val = st->scale_tbls[setup_info->ref_sel][setup_info->pga][0];
+		*val2 = st->scale_tbls[setup_info->ref_sel][setup_info->pga][1];
+		mutex_unlock(&st->lock);
+
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_OFFSET:
+		*val = st->bipolar ? -(1 << (chan->scan_type.realbits - 1)) : 0;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		mutex_lock(&st->lock);
+		ad4130_fs_to_freq(setup_info->filter_mode, setup_info->fs,
+				  val, val2, false);
+		mutex_unlock(&st->lock);
+
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		mutex_lock(&st->lock);
+		ad4130_fs_to_freq(setup_info->filter_mode, setup_info->fs,
+				  val, val2, true);
+		mutex_unlock(&st->lock);
+
+		return IIO_VAL_INT_PLUS_NANO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ad4130_read_avail(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     const int **vals, int *type, int *length,
+			     long info)
+{
+	struct ad4130_state *st = iio_priv(indio_dev);
+	unsigned int channel = chan->scan_index;
+	struct ad4130_setup_info *setup_info = &st->chans_info[channel].setup;
+	const struct ad4130_filter_config *filter_config;
+
+	switch (info) {
+	case IIO_CHAN_INFO_SCALE:
+		*vals = (int *)st->scale_tbls[setup_info->ref_sel];
+		*length = ARRAY_SIZE(st->scale_tbls[setup_info->ref_sel]) * 2;
+
+		*type = IIO_VAL_INT_PLUS_NANO;
+
+		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		mutex_lock(&st->lock);
+		filter_config = &ad4130_filter_configs[setup_info->filter_mode];
+		mutex_unlock(&st->lock);
+
+		*vals = (int *)filter_config->samp_freq_avail;
+		*length = filter_config->samp_freq_avail_len * 2;
+		*type = IIO_VAL_FRACTIONAL;
+
+		return filter_config->samp_freq_avail_type;
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		mutex_lock(&st->lock);
+		filter_config = &ad4130_filter_configs[setup_info->filter_mode];
+		mutex_unlock(&st->lock);
+
+		*vals = (int *)filter_config->db3_freq_avail;
+		*length = filter_config->db3_freq_avail_len * 2;
+		*type = IIO_VAL_FRACTIONAL;
+
+		return filter_config->db3_freq_avail_type;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ad4130_write_raw_get_fmt(struct iio_dev *indio_dev,
+				    struct iio_chan_spec const *chan,
+				    long info)
+{
+	switch (info) {
+	case IIO_CHAN_INFO_SCALE:
+	case IIO_CHAN_INFO_SAMP_FREQ:
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		return IIO_VAL_INT_PLUS_NANO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ad4130_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long info)
+{
+	struct ad4130_state *st = iio_priv(indio_dev);
+	unsigned int channel = chan->scan_index;
+
+	switch (info) {
+	case IIO_CHAN_INFO_SCALE:
+		return ad4130_set_channel_pga(st, channel, val, val2);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return ad4130_set_channel_freq(st, channel, val, val2, false);
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		return ad4130_set_channel_freq(st, channel, val, val2, true);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ad4130_reg_access(struct iio_dev *indio_dev, unsigned int reg,
+			     unsigned int writeval, unsigned int *readval)
+{
+	struct ad4130_state *st = iio_priv(indio_dev);
+
+	if (readval)
+		return regmap_read(st->regmap, reg, readval);
+
+	return regmap_write(st->regmap, reg, writeval);
+}
+
+static int ad4130_update_scan_mode(struct iio_dev *indio_dev,
+				   const unsigned long *scan_mask)
+{
+	struct ad4130_state *st = iio_priv(indio_dev);
+	unsigned int channel;
+	unsigned int val = 0;
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	for_each_set_bit(channel, scan_mask, indio_dev->num_channels) {
+		ret = ad4130_set_channel_enable(st, channel, true);
+		if (ret)
+			goto out;
+
+		val++;
+	}
+
+	st->num_enabled_channels = val;
+
+out:
+	mutex_unlock(&st->lock);
+
+	return 0;
+}
+
+static int ad4130_set_fifo_watermark(struct iio_dev *indio_dev, unsigned int val)
+{
+	struct ad4130_state *st = iio_priv(indio_dev);
+	unsigned int eff;
+	int ret;
+
+	if (val > AD4130_FIFO_SIZE)
+		return -EINVAL;
+
+	/*
+	 * Always set watermark to a multiple of the number of enabled channels
+	 * to avoid making the FIFO unaligned.
+	 */
+	eff = rounddown(val, st->num_enabled_channels);
+
+	mutex_lock(&st->lock);
+
+	ret = regmap_update_bits(st->regmap, AD4130_REG_FIFO_CONTROL,
+				 AD4130_WATERMARK_MASK,
+				 FIELD_PREP(AD4130_WATERMARK_MASK,
+					    ad4130_watermark_reg_val(eff)));
+	if (ret)
+		goto out;
+
+	st->effective_watermark = eff;
+	st->watermark = val;
+
+out:
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static const struct iio_info ad4130_info = {
+	.read_raw = ad4130_read_raw,
+	.read_avail = ad4130_read_avail,
+	.write_raw_get_fmt = ad4130_write_raw_get_fmt,
+	.write_raw = ad4130_write_raw,
+	.update_scan_mode = ad4130_update_scan_mode,
+	.hwfifo_set_watermark = ad4130_set_fifo_watermark,
+	.debugfs_reg_access = ad4130_reg_access,
+};
+
+static int ad4130_buffer_postenable(struct iio_dev *indio_dev)
+{
+	struct ad4130_state *st = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	ret = ad4130_set_watermark_interrupt_en(st, true);
+	if (ret)
+		goto out;
+
+	/*
+	 * When the chip enters FIFO mode, IRQ polarity is inversed.
+	 * See datasheet pages: 65, FIFO Watermark Interrupt section,
+	 * and 71, Bit Descriptions for STATUS Register, RDYB.
+	 */
+	ret = irq_set_irq_type(st->spi->irq, st->inv_irq_trigger);
+	if (ret)
+		goto out;
+
+	ret = ad4130_set_fifo_mode(st, AD4130_FIFO_MODE_WATERMARK);
+	if (ret)
+		goto out;
+
+	ret = ad4130_set_mode(st, AD4130_MODE_CONTINUOUS);
+
+out:
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static int ad4130_buffer_predisable(struct iio_dev *indio_dev)
+{
+	struct ad4130_state *st = iio_priv(indio_dev);
+	unsigned int i;
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	ret = ad4130_set_mode(st, AD4130_MODE_IDLE);
+	if (ret)
+		goto out;
+
+	/* When the chip exits FIFO mode, IRQ polarity returns to normal. */
+	ret = irq_set_irq_type(st->spi->irq, st->irq_trigger);
+	if (ret)
+		goto out;
+
+	ret = ad4130_set_fifo_mode(st, AD4130_FIFO_MODE_DISABLED);
+	if (ret)
+		goto out;
+
+	ret = ad4130_set_watermark_interrupt_en(st, false);
+	if (ret)
+		goto out;
+
+	/*
+	 * update_scan_mode is not called in the disable path, disable all
+	 * channels here.
+	 */
+	for (i = 0; i < indio_dev->num_channels; i++) {
+		ret = ad4130_set_channel_enable(st, i, false);
+		if (ret)
+			goto out;
+	}
+
+out:
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static const struct iio_buffer_setup_ops ad4130_buffer_ops = {
+	.postenable = ad4130_buffer_postenable,
+	.predisable = ad4130_buffer_predisable,
+};
+
+static ssize_t ad4130_get_fifo_watermark(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct ad4130_state *st = iio_priv(dev_to_iio_dev(dev));
+	unsigned int val;
+
+	mutex_lock(&st->lock);
+	val = st->watermark;
+	mutex_unlock(&st->lock);
+
+	return sysfs_emit(buf, "%d\n", val);
+}
+
+static ssize_t ad4130_get_fifo_enabled(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	struct ad4130_state *st = iio_priv(dev_to_iio_dev(dev));
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(st->regmap, AD4130_REG_FIFO_CONTROL, &val);
+	if (ret)
+		return ret;
+
+	val = FIELD_GET(AD4130_FIFO_MODE_MASK, val);
+
+	return sysfs_emit(buf, "%d\n", val != AD4130_FIFO_MODE_DISABLED);
+}
+
+static IIO_CONST_ATTR(hwfifo_watermark_min, "1");
+static IIO_CONST_ATTR(hwfifo_watermark_max, __stringify(AD4130_FIFO_SIZE));
+static IIO_DEVICE_ATTR(hwfifo_watermark, 0444, ad4130_get_fifo_watermark, NULL, 0);
+static IIO_DEVICE_ATTR(hwfifo_enabled, 0444, ad4130_get_fifo_enabled, NULL, 0);
+
+static const struct attribute *ad4130_fifo_attributes[] = {
+	&iio_const_attr_hwfifo_watermark_min.dev_attr.attr,
+	&iio_const_attr_hwfifo_watermark_max.dev_attr.attr,
+	&iio_dev_attr_hwfifo_watermark.dev_attr.attr,
+	&iio_dev_attr_hwfifo_enabled.dev_attr.attr,
+	NULL
+};
+
+static int ad4130_find_table_index(const unsigned int *tbl, size_t len,
+				   unsigned int val)
+{
+	unsigned int i;
+
+	for (i = 0; i < len; i++)
+		if (tbl[i] == val)
+			return i;
+
+	return -EINVAL;
+}
+
+static int ad4130_get_ref_voltage(struct ad4130_state *st,
+				  enum ad4130_ref_sel ref_sel)
+{
+	struct device *dev = &st->spi->dev;
+	int ret;
+
+	switch (ref_sel) {
+	case AD4130_REF_REFIN1:
+		ret = regulator_get_voltage(st->regulators[2].consumer);
+		break;
+	case AD4130_REF_REFIN2:
+		ret = regulator_get_voltage(st->regulators[3].consumer);
+		break;
+	case AD4130_REF_AVDD_AVSS:
+		ret = regulator_get_voltage(st->regulators[0].consumer);
+		break;
+	case AD4130_REF_REFOUT_AVSS:
+		ret = st->int_ref_uv;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Cannot use reference %u\n",
+				     ref_sel);
+
+	return ret;
+}
+
+static int ad4130_parse_fw_setup(struct ad4130_state *st,
+				 struct fwnode_handle *child,
+				 struct ad4130_setup_info *setup_info)
+{
+	struct device *dev = &st->spi->dev;
+	u32 current_na;
+	int ret;
+
+	current_na = 0;
+	fwnode_property_read_u32(child, "adi,excitation-current-0-nanoamps",
+				 &current_na);
+	ret = ad4130_find_table_index(ad4130_iout_current_na_tbl,
+				      AD4130_IOUT_MAX, current_na);
+	if (ret < 0)
+		return dev_err_probe(dev, ret,
+				     "Invalid excitation current %unA\n",
+				     current_na);
+	setup_info->iout0_val = ret;
+
+	current_na = 0;
+	fwnode_property_read_u32(child, "adi,excitation-current-1-nanoamps",
+				 &current_na);
+	ret = ad4130_find_table_index(ad4130_iout_current_na_tbl,
+				      AD4130_IOUT_MAX, current_na);
+	if (ret < 0)
+		return dev_err_probe(dev, ret,
+				     "Invalid excitation current %unA\n",
+				     current_na);
+	setup_info->iout1_val = ret;
+
+	current_na = 0;
+	fwnode_property_read_u32(child, "adi,burnout-current-nanoamps",
+				 &current_na);
+	ret = ad4130_find_table_index(ad4130_burnout_current_na_tbl,
+				      AD4130_BURNOUT_MAX, current_na);
+	if (ret < 0)
+		return dev_err_probe(dev, ret,
+				     "Invalid burnout current %unA\n",
+				     current_na);
+	setup_info->burnout = ret;
+
+	setup_info->ref_bufp = fwnode_property_read_bool(child, "adi,buffered-positive");
+	setup_info->ref_bufm = fwnode_property_read_bool(child, "adi,buffered-negative");
+
+	setup_info->ref_sel = AD4130_REF_REFIN1;
+	fwnode_property_read_u32(child, "adi,reference-select",
+				 &setup_info->ref_sel);
+	if (setup_info->ref_sel >= AD4130_REF_SEL_MAX)
+		return dev_err_probe(dev, -EINVAL,
+				     "Invalid reference selected %u\n",
+				     setup_info->ref_sel);
+
+	if (setup_info->ref_sel == AD4130_REF_REFOUT_AVSS)
+		st->int_ref_en = true;
+
+	ret = ad4130_get_ref_voltage(st, setup_info->ref_sel);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int ad4130_validate_diff_channel(struct ad4130_state *st, u32 pin)
+{
+	struct device *dev = &st->spi->dev;
+
+	if (pin >= AD4130_MAX_DIFF_INPUTS)
+		return dev_err_probe(dev, -EINVAL,
+				     "Invalid diffreential channel %u\n", pin);
+
+	if (pin >= AD4130_MAX_ANALOG_PINS)
+		return 0;
+
+	if (st->pins_fn[pin] == AD4130_PIN_FN_SPECIAL)
+		return dev_err_probe(dev, -EINVAL,
+				     "Pin %u already used with fn %u\n", pin,
+				     st->pins_fn[pin]);
+
+	st->pins_fn[pin] |= AD4130_PIN_FN_DIFF;
+
+	return 0;
+}
+
+static int ad4130_validate_diff_channels(struct ad4130_state *st,
+					 u32 *pins, unsigned int len)
+{
+	unsigned int i;
+	int ret = 0;
+
+	for (i = 0; i < len; i++) {
+		ret = ad4130_validate_diff_channel(st, pins[i]);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+static int ad4130_validate_excitation_pin(struct ad4130_state *st, u32 pin)
+{
+	struct device *dev = &st->spi->dev;
+
+	if (pin >= AD4130_MAX_ANALOG_PINS)
+		return dev_err_probe(dev, -EINVAL,
+				     "Invalid excitation pin %u\n", pin);
+
+	if (st->pins_fn[pin] == AD4130_PIN_FN_SPECIAL)
+		return dev_err_probe(dev, -EINVAL,
+				     "Pin %u already used with fn %u\n", pin,
+				     st->pins_fn[pin]);
+
+	st->pins_fn[pin] |= AD4130_PIN_FN_EXCITATION;
+
+	return 0;
+}
+
+static int ad4130_validate_vbias_pin(struct ad4130_state *st, u32 pin)
+{
+	struct device *dev = &st->spi->dev;
+
+	if (pin >= AD4130_MAX_ANALOG_PINS)
+		return dev_err_probe(dev, -EINVAL, "Invalid vbias pin %u\n",
+				     pin);
+
+	if (st->pins_fn[pin] == AD4130_PIN_FN_SPECIAL)
+		return dev_err_probe(dev, -EINVAL,
+				     "Pin %u already used with fn %u\n", pin,
+				     st->pins_fn[pin]);
+
+	st->pins_fn[pin] |= AD4130_PIN_FN_VBIAS;
+
+	return 0;
+}
+
+static int ad4130_validate_vbias_pins(struct ad4130_state *st,
+				      u32 *pins, unsigned int len)
+{
+	unsigned int i;
+	int ret = 0;
+
+	for (i = 0; i < st->num_vbias_pins; i++) {
+		ret = ad4130_validate_vbias_pin(st, pins[i]);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+static int ad4130_parse_fw_channel(struct iio_dev *indio_dev,
+				   struct fwnode_handle *child)
+{
+	struct ad4130_state *st = iio_priv(indio_dev);
+	unsigned int index = indio_dev->num_channels++;
+	struct device *dev = &st->spi->dev;
+	struct ad4130_chan_info *chan_info;
+	struct iio_chan_spec *chan;
+	u32 pins[2];
+	int ret;
+
+	if (index >= AD4130_MAX_CHANNELS)
+		return dev_err_probe(dev, -EINVAL, "Too many channels\n");
+
+	chan = &st->chans[index];
+	chan_info = &st->chans_info[index];
+
+	*chan = ad4130_channel_template;
+	chan->scan_type.realbits = st->chip_info->resolution;
+	chan->scan_type.storagebits = st->chip_info->resolution;
+	chan->scan_index = index;
+
+	chan_info->slot = AD4130_INVALID_SLOT;
+	chan_info->setup.fs = AD4130_FS_MIN;
+	chan_info->initialized = true;
+
+	ret = fwnode_property_read_u32_array(child, "diff-channels", pins,
+					     ARRAY_SIZE(pins));
+	if (ret)
+		return ret;
+
+	ret = ad4130_validate_diff_channels(st, pins, ARRAY_SIZE(pins));
+	if (ret)
+		return ret;
+
+	chan->channel = pins[0];
+	chan->channel2 = pins[1];
+
+	ret = ad4130_parse_fw_setup(st, child, &chan_info->setup);
+	if (ret)
+		return ret;
+
+	fwnode_property_read_u32(child, "adi,excitation-pin-0",
+				 &chan_info->iout0);
+	if (chan_info->setup.iout0_val != AD4130_IOUT_OFF) {
+		ret = ad4130_validate_excitation_pin(st, chan_info->iout0);
+		if (ret)
+			return ret;
+	}
+
+	fwnode_property_read_u32(child, "adi,excitation-pin-1",
+				 &chan_info->iout1);
+	if (chan_info->setup.iout1_val != AD4130_IOUT_OFF) {
+		ret = ad4130_validate_excitation_pin(st, chan_info->iout1);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int ad4130_parse_fw_children(struct iio_dev *indio_dev)
+{
+	struct ad4130_state *st = iio_priv(indio_dev);
+	struct device *dev = &st->spi->dev;
+	struct fwnode_handle *child;
+	int ret;
+
+	indio_dev->channels = st->chans;
+
+	device_for_each_child_node(dev, child) {
+		ret = ad4130_parse_fw_channel(indio_dev, child);
+		if (ret) {
+			fwnode_handle_put(child);
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static int ad4310_parse_fw(struct iio_dev *indio_dev)
+{
+	struct ad4130_state *st = iio_priv(indio_dev);
+	struct device *dev = &st->spi->dev;
+	u32 ext_clk_freq = AD4130_MCLK_FREQ_76_8KHZ;
+	bool int_clk_out = false;
+	unsigned int i;
+	int avdd_uv;
+	int irq;
+	int ret;
+
+	st->mclk = devm_clk_get_optional(dev, "mclk");
+	if (IS_ERR(st->mclk))
+		return dev_err_probe(dev, PTR_ERR(st->mclk),
+				     "Failed to get mclk\n");
+
+	st->int_pin_sel = AD4130_INT_PIN_DOUT_OR_INT;
+
+	for (i = 0; i < ARRAY_SIZE(ad4130_int_pin_names); i++) {
+		irq = fwnode_irq_get_byname(dev_fwnode(dev),
+					    ad4130_int_pin_names[i]);
+		if (irq > 0) {
+			st->int_pin_sel = i;
+			break;
+		}
+	}
+
+	if (st->int_pin_sel == AD4130_INT_PIN_DOUT ||
+	    (st->int_pin_sel == AD4130_INT_PIN_DOUT_OR_INT &&
+	     !st->chip_info->has_int_pin))
+		return dev_err_probe(dev, -EINVAL,
+				     "Cannot use DOUT as interrupt pin\n");
+
+	if (st->int_pin_sel == AD4130_INT_PIN_P2)
+		st->pins_fn[AD4130_AIN3_P2] = AD4130_PIN_FN_SPECIAL;
+
+	int_clk_out = device_property_read_bool(dev, "adi,int-clk-out");
+	if (st->mclk && int_clk_out)
+		return dev_err_probe(dev, -EINVAL,
+				     "Cannot expose internal clock\n");
+
+	device_property_read_u32(dev, "adi,ext-clk-freq", &ext_clk_freq);
+	if (ext_clk_freq != AD4130_MCLK_FREQ_153_6KHZ &&
+	    ext_clk_freq != AD4130_MCLK_FREQ_76_8KHZ)
+		return dev_err_probe(dev, -EINVAL,
+				     "Invalid external clock frequency %u\n",
+				     ext_clk_freq);
+
+	if (st->mclk && ext_clk_freq == AD4130_MCLK_FREQ_153_6KHZ)
+		st->mclk_sel = AD4130_MCLK_153_6KHZ_EXT;
+	else if (st->mclk)
+		st->mclk_sel = AD4130_MCLK_76_8KHZ_EXT;
+	else if (int_clk_out)
+		st->mclk_sel = AD4130_MCLK_76_8KHZ_OUT;
+	else
+		st->mclk_sel = AD4130_MCLK_76_8KHZ;
+
+	if (st->int_pin_sel == AD4130_INT_PIN_CLK &&
+	    st->mclk_sel != AD4130_MCLK_76_8KHZ)
+		return dev_err_probe(dev, -EINVAL,
+				     "Invalid clock %u for interrupt pin %u\n",
+				     st->mclk_sel, st->int_pin_sel);
+
+	st->int_ref_uv = AD4130_INT_REF_2_5V;
+
+	/*
+	 * When the AVDD supply is set to below 2.5V the internal reference of
+	 * 1.25V should be selected.
+	 * See datasheet page 37, section ADC REFERENCE.
+	 */
+	avdd_uv = regulator_get_voltage(st->regulators[0].consumer);
+	if (avdd_uv > 0 && avdd_uv < AD4130_INT_REF_2_5V)
+		st->int_ref_uv = AD4130_INT_REF_1_25V;
+
+	st->bipolar = device_property_read_bool(dev, "adi,bipolar");
+
+	ret = device_property_count_u32(dev, "adi,vbias-pins");
+	if (ret > 0) {
+		if (ret > AD4130_MAX_ANALOG_PINS)
+			return dev_err_probe(dev, -EINVAL,
+					     "Too many vbias pins %u\n", ret);
+
+		st->num_vbias_pins = ret;
+
+		ret = device_property_read_u32_array(dev, "adi,vbias-pins",
+						     st->vbias_pins,
+						     st->num_vbias_pins);
+		if (ret)
+			return dev_err_probe(dev, ret,
+					     "Failed to read vbias pins\n");
+
+		ret = ad4130_validate_vbias_pins(st, st->vbias_pins,
+						 st->num_vbias_pins);
+		if (ret)
+			return ret;
+	}
+
+	ret = ad4130_parse_fw_children(indio_dev);
+	if (ret)
+		return ret;
+
+	/*
+	 * Output-only GPIO functionality is available on pins AIN2 through
+	 * AIN5. If these pins are used for anything else, do not expose them.
+	 */
+	for (i = 0; i < AD4130_MAX_GPIOS; i++) {
+		if (st->pins_fn[i + AD4130_AIN2_P1] != AD4130_PIN_FN_NONE)
+			continue;
+
+		st->gpio_offsets[st->num_gpios++] = i;
+	}
+
+	return 0;
+}
+
+static void ad4130_fill_scale_tbls(struct ad4130_state *st)
+{
+	unsigned int i, j;
+
+	for (i = 0; i < AD4130_REF_SEL_MAX; i++) {
+		int ret;
+
+		ret = ad4130_get_ref_voltage(st, i);
+		if (ret < 0)
+			continue;
+
+		for (j = 0; j < AD4130_PGA_NUM; j++) {
+			unsigned int pow = st->chip_info->resolution + j -
+					   st->bipolar;
+			unsigned int nv = div_u64((((u64)ret * NANO) >>
+						   pow), MILLI);
+
+			st->scale_tbls[i][j][0] = 0;
+			st->scale_tbls[i][j][1] = nv;
+		}
+	}
+}
+
+static void ad4130_clk_disable_unprepare(void *clk)
+{
+	clk_disable_unprepare(clk);
+}
+
+static int ad4130_setup(struct iio_dev *indio_dev)
+{
+	struct ad4130_state *st = iio_priv(indio_dev);
+	struct device *dev = &st->spi->dev;
+	unsigned int int_ref_val;
+	unsigned long rate = AD4130_MCLK_FREQ_76_8KHZ;
+	unsigned int val;
+	unsigned int i;
+	int ret;
+
+	if (st->mclk_sel == AD4130_MCLK_153_6KHZ_EXT)
+		rate = AD4130_MCLK_FREQ_153_6KHZ;
+
+	ret = clk_set_rate(st->mclk, rate);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(st->mclk);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, ad4130_clk_disable_unprepare,
+				       st->mclk);
+	if (ret)
+		return ret;
+
+	if (st->int_ref_uv == AD4130_INT_REF_2_5V)
+		int_ref_val = AD4130_INT_REF_VAL_2_5V;
+	else
+		int_ref_val = AD4130_INT_REF_VAL_1_25V;
+
+	/* Switch to SPI 4-wire mode. */
+	val = AD4130_CSB_EN_MASK;
+	val |= FIELD_PREP(AD4130_BIPOLAR_MASK, st->bipolar);
+	val |= FIELD_PREP(AD4130_INT_REF_EN_MASK, st->int_ref_en);
+	val |= FIELD_PREP(AD4130_MODE_MASK, AD4130_MODE_IDLE);
+	val |= FIELD_PREP(AD4130_MCLK_SEL_MASK, st->mclk_sel);
+	val |= FIELD_PREP(AD4130_INT_REF_VAL_MASK, int_ref_val);
+
+	ret = regmap_write(st->regmap, AD4130_REG_ADC_CONTROL, val);
+	if (ret)
+		return ret;
+
+	val = FIELD_PREP(AD4130_INT_PIN_SEL_MASK, st->int_pin_sel);
+	for (i = 0; i < st->num_gpios; i++)
+		val |= BIT(st->gpio_offsets[i]);
+
+	ret = regmap_write(st->regmap, AD4130_REG_IO_CONTROL, val);
+	if (ret)
+		return ret;
+
+	val = 0;
+	for (i = 0; i < st->num_vbias_pins; i++)
+		val |= BIT(st->vbias_pins[i]);
+
+	ret = regmap_write(st->regmap, AD4130_REG_VBIAS, val);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(st->regmap, AD4130_REG_FIFO_CONTROL,
+				 AD4130_ADD_FIFO_HEADER_MASK, 0);
+	if (ret)
+		return ret;
+
+	/* FIFO watermark interrupt starts out as enabled, disable it. */
+	ret = ad4130_set_watermark_interrupt_en(st, false);
+	if (ret)
+		return ret;
+
+	/* Setup channels. */
+	for (i = 0; i < indio_dev->num_channels; i++) {
+		struct ad4130_chan_info *chan_info = &st->chans_info[i];
+		struct iio_chan_spec *chan = &st->chans[i];
+		unsigned int val;
+
+		val = FIELD_PREP(AD4130_AINP_MASK, chan->channel) |
+		      FIELD_PREP(AD4130_AINM_MASK, chan->channel2) |
+		      FIELD_PREP(AD4130_IOUT1_MASK, chan_info->iout0) |
+		      FIELD_PREP(AD4130_IOUT2_MASK, chan_info->iout1);
+
+		ret = regmap_write(st->regmap, AD4130_REG_CHANNEL_X(i), val);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int ad4130_soft_reset(struct ad4130_state *st)
+{
+	int ret;
+
+	ret = spi_write(st->spi, st->reset_buf, sizeof(st->reset_buf));
+	if (ret)
+		return ret;
+
+	fsleep(AD4130_SOFT_RESET_SLEEP_US);
+
+	return 0;
+}
+
+static void ad4130_disable_regulators(void *data)
+{
+	struct ad4130_state *st = data;
+
+	regulator_bulk_disable(ARRAY_SIZE(st->regulators), st->regulators);
+}
+
+static int ad4130_probe(struct spi_device *spi)
+{
+	const struct ad4130_chip_info *info;
+	struct device *dev = &spi->dev;
+	struct iio_dev *indio_dev;
+	struct ad4130_state *st;
+	int ret;
+
+	info = device_get_match_data(dev);
+	if (!info)
+		return -ENODEV;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	memset(st->reset_buf, 0xff, sizeof(st->reset_buf));
+	init_completion(&st->completion);
+	mutex_init(&st->lock);
+	st->chip_info = info;
+	st->spi = spi;
+
+	/*
+	 * Xfer:   [ XFR1 ] [         XFR2         ]
+	 * Master:  0x7D N   ......................
+	 * Slave:   ......   DATA1 DATA2 ... DATAN
+	 */
+	st->fifo_tx_buf[0] = AD4130_COMMS_READ_MASK | AD4130_REG_FIFO_DATA;
+	st->fifo_xfer[0].tx_buf = st->fifo_tx_buf;
+	st->fifo_xfer[0].len = sizeof(st->fifo_tx_buf);
+	st->fifo_xfer[1].rx_buf = st->fifo_rx_buf;
+	spi_message_init_with_transfers(&st->fifo_msg, st->fifo_xfer,
+					ARRAY_SIZE(st->fifo_xfer));
+
+	indio_dev->name = st->chip_info->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &ad4130_info;
+
+	st->regmap = devm_regmap_init(dev, NULL, st, &ad4130_regmap_config);
+	if (IS_ERR(st->regmap))
+		return PTR_ERR(st->regmap);
+
+	st->regulators[0].supply = "avdd";
+	st->regulators[1].supply = "iovdd";
+	st->regulators[2].supply = "refin1";
+	st->regulators[3].supply = "refin2";
+
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(st->regulators),
+				      st->regulators);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to get regulators\n");
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(st->regulators), st->regulators);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to enable regulators\n");
+
+	ret = devm_add_action_or_reset(dev, ad4130_disable_regulators, st);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to add regulators disable action\n");
+
+	ret = ad4130_soft_reset(st);
+	if (ret)
+		return ret;
+
+	ret = ad4310_parse_fw(indio_dev);
+	if (ret)
+		return ret;
+
+	ret = ad4130_setup(indio_dev);
+	if (ret)
+		return ret;
+
+	ad4130_fill_scale_tbls(st);
+
+	if (st->num_gpios) {
+		st->gc.owner = THIS_MODULE;
+		st->gc.label = st->chip_info->name;
+		st->gc.base = -1;
+		st->gc.ngpio = AD4130_MAX_GPIOS;
+		st->gc.parent = dev;
+		st->gc.can_sleep = true;
+		st->gc.get_direction = ad4130_gpio_get_direction;
+		st->gc.set = ad4130_gpio_set;
+
+		ret = devm_gpiochip_add_data(dev, &st->gc, st);
+		if (ret)
+			return ret;
+	}
+
+	ret = devm_iio_kfifo_buffer_setup_ext(dev, indio_dev,
+					      &ad4130_buffer_ops,
+					      ad4130_fifo_attributes);
+	if (ret)
+		return ret;
+
+	ret = devm_request_threaded_irq(dev, spi->irq, NULL,
+					ad4130_irq_handler, IRQF_ONESHOT,
+					indio_dev->name, indio_dev);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to request irq\n");
+
+	st->irq_trigger = irq_get_trigger_type(spi->irq);
+	if (st->irq_trigger & IRQF_TRIGGER_RISING)
+		st->inv_irq_trigger = IRQF_TRIGGER_FALLING;
+	else if (st->irq_trigger & IRQF_TRIGGER_FALLING)
+		st->inv_irq_trigger = IRQF_TRIGGER_RISING;
+	else
+		return dev_err_probe(dev, -EINVAL, "Invalid irq flags: %u\n",
+				     st->irq_trigger);
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct ad4130_chip_info ad4130_chip_info_tbl[] = {
+	[ID_AD4130_8_24_WLCSP] = {
+		.name = AD4130_8_NAME,
+		.resolution = 24,
+		.has_int_pin = true,
+	},
+	[ID_AD4130_8_24_LFCSP] = {
+		.name = AD4130_8_NAME,
+		.resolution = 24,
+	},
+	[ID_AD4130_8_16_WLCSP] = {
+		.name = AD4130_8_NAME,
+		.resolution = 16,
+		.has_int_pin = true,
+	},
+	[ID_AD4130_8_16_LFCSP] = {
+		.name = AD4130_8_NAME,
+		.resolution = 16,
+	},
+};
+
+static const struct of_device_id ad4130_of_match[] = {
+	{
+		.compatible = "adi,ad4130-8-16-lfcsp",
+		.data = &ad4130_chip_info_tbl[ID_AD4130_8_16_LFCSP],
+	},
+	{
+		.compatible = "adi,ad4130-8-16-wlcsp",
+		.data = &ad4130_chip_info_tbl[ID_AD4130_8_16_WLCSP],
+	},
+	{
+		.compatible = "adi,ad4130-8-24-lfcsp",
+		.data = &ad4130_chip_info_tbl[ID_AD4130_8_24_LFCSP],
+	},
+	{
+		.compatible = "adi,ad4130-8-24-wlcsp",
+		.data = &ad4130_chip_info_tbl[ID_AD4130_8_24_WLCSP],
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ad4130_of_match);
+
+static struct spi_driver ad4130_driver = {
+	.driver = {
+		.name = "ad4130",
+		.of_match_table = ad4130_of_match,
+	},
+	.probe = ad4130_probe,
+};
+module_spi_driver(ad4130_driver);
+
+MODULE_AUTHOR("Cosmin Tanislav <cosmin.tanislav@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD4130 SPI driver");
+MODULE_LICENSE("GPL");
-- 
2.35.3


  parent reply	other threads:[~2022-04-19 15:08 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-19 15:08 [PATCH v3 0/2] AD4130 Cosmin Tanislav
2022-04-19 15:08 ` [PATCH v3 1/2] dt-bindings: iio: adc: add AD4130 Cosmin Tanislav
2022-04-26  0:37   ` Rob Herring
2022-04-27 12:47     ` Cosmin Tanislav
2022-04-27 21:41       ` Rob Herring
2022-06-08  8:31     ` Cosmin Tanislav
2022-05-01 16:09   ` Jonathan Cameron
2022-04-19 15:08 ` Cosmin Tanislav [this message]
2022-05-01 16:08   ` [PATCH v3 2/2] iio: adc: ad4130: add AD4130 driver Jonathan Cameron
2022-05-02  8:53     ` Cosmin Tanislav
2022-05-07 16:35       ` Jonathan Cameron
2022-05-07 16:49         ` Cosmin Tanislav
2022-05-07 17:04           ` Jonathan Cameron
2022-05-14 13:32             ` Cosmin Tanislav
2022-05-14 16:24               ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220419150828.191933-3-cosmin.tanislav@analog.com \
    --to=demonsingur@gmail.com \
    --cc=cosmin.tanislav@analog.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.