[PATCH v4 0/4] Add support for Silicon Mitus SM5703 MFD

[PATCH v4 0/4] Add support for Silicon Mitus SM5703 MFD

[Markuss Broks]

This series adds support for Silicon Mitus SM5703 MFD and the
appropriate device-tree bindings. This only adds support for the
regulator module, leaving room for other modules implemented in
future (code for other modules is really not ready for submission
right now). Silicon Mitus SM5703 is used on various mobile phones,
mostly Samsung Galaxy (J5 (2015, 2016), On7, J7 (2015, 2016) ...).

v2:
- mfd bindings: add "SM5703" to the title
- mfd bindings: indent the example
- regulators/Makefile: sort alphabetically
v3:
- mfd bindings: fix an error in example: there should be no
newline between #size-cells and #address-cells and the node
v4:
mfd bindings:
- drop the -mfd in the compatible
- change reference path to the regulator yaml to an absolute one
- use -gpios for the reset GPIO
- make reset-gpios a required property
- correct the example node name
- correct the example compatible
regulator bindings:
- add unevaluatedProperties: false to all four types of regulators

Markuss Broks (4):
  dt-bindings: regulator: Add bindings for Silicon Mitus SM5703
    regulators
  dt-bindings: mfd: Add bindings for Silicon Mitus SM5703 MFD
  mfd: sm5703: Add support for SM5703 MFD
  regulator: sm5703-regulator: Add regulators support for SM5703 MFD

 .../bindings/mfd/siliconmitus,sm5703.yaml     |  91 ++++++++++
 .../siliconmitus,sm5703-regulator.yaml        |  48 ++++++
 MAINTAINERS                                   |   8 +
 drivers/mfd/Kconfig                           |  12 ++
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/sm5703.c                          |  81 +++++++++
 drivers/regulator/Kconfig                     |   7 +
 drivers/regulator/Makefile                    |   1 +
 drivers/regulator/sm5703-regulator.c          | 162 ++++++++++++++++++
 include/linux/mfd/sm5703.h                    | 105 ++++++++++++
 10 files changed, 516 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/siliconmitus,sm5703.yaml
 create mode 100644 Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml
 create mode 100644 drivers/mfd/sm5703.c
 create mode 100644 drivers/regulator/sm5703-regulator.c
 create mode 100644 include/linux/mfd/sm5703.h

-- 
2.35.1

[PATCH v4 1/4] dt-bindings: regulator: Add bindings for Silicon Mitus SM5703 regulators

[Markuss Broks]

This patch adds device-tree bindings for regulators on Silicon Mitus
SM5703 MFD.

Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
---
 .../siliconmitus,sm5703-regulator.yaml        | 52 +++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml

diff --git a/Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml b/Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml
new file mode 100644
index 000000000000..a8ffd3ecf3a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/siliconmitus,sm5703-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Mitus SM5703 multi function device regulators
+
+maintainers:
+  - Markuss Broks <markuss.broks@gmail.com>
+
+description: |
+  SM5703 regulators node should be a sub node of the SM5703 MFD node. See SM5703 MFD
+  bindings at Documentation/devicetree/bindings/mfd/siliconmitus,sm5703.yaml
+  Regulator nodes should be named as USBLDO_<number>, BUCK, VBUS, LDO_<number>.
+  The definition for each of these nodes is defined using the standard
+  binding for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
+
+properties:
+  compatible:
+    const: siliconmitus,sm5703-regulator
+
+  buck:
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for the BUCK regulator.
+
+  vbus:
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for the VBUS regulator.
+
+patternProperties:
+  "^ldo[1-3]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+  "^usbldo[1-2]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for a single USBLDO regulator.
+
+additionalProperties: false
-- 
2.35.1

[PATCH v4 2/4] dt-bindings: mfd: Add bindings for Silicon Mitus SM5703 MFD

[Markuss Broks]

This patch adds device-tree bindings for the Silicon Mitus
SM5703 MFD.

Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
---
 .../bindings/mfd/siliconmitus,sm5703.yaml     | 96 +++++++++++++++++++
 1 file changed, 96 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/siliconmitus,sm5703.yaml

diff --git a/Documentation/devicetree/bindings/mfd/siliconmitus,sm5703.yaml b/Documentation/devicetree/bindings/mfd/siliconmitus,sm5703.yaml
new file mode 100644
index 000000000000..0d9de057a63b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/siliconmitus,sm5703.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/siliconmitus,sm5703.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Mitus SM5703 multi-function device bindings
+
+maintainers:
+  - Markuss Broks <markuss.broks@gmail.com>
+
+description: |
+  Silicon Mitus SM5703 is a multi-function device, that consists of several
+  modules, designed for a mobile phone use. It consists of
+  LDO, Buck, USBLDO and VBUS regulators, a flash LED driver, a MUIC unit,
+  a fuel gauge and a battery charger circuit. The MUIC and Fuel-Gauge units
+  are separate from the main MFD, having their own i2c lines, while the
+  LED driver, regulators and charger are sharing the main i2c bus of the MFD.
+
+properties:
+  compatible:
+    const: siliconmitus,sm5703
+
+  reg:
+    description:
+      I2C slave address.
+    maxItems: 1
+
+  regulators:
+    $ref: /schemas/regulator/siliconmitus,sm5703-regulator.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  reset-gpios:
+    description:
+      GPIO which is connected to the MRSTB pin.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - regulators
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@49 {
+        compatible = "siliconmitus,sm5703";
+        reg = <0x49>;
+
+        reset-gpios = <&msmgpio 24 GPIO_ACTIVE_HIGH>;
+        pinctrl-0 = <&mrstb_default>;
+
+        regulator {
+          compatible = "siliconmitus,sm5703-regulator";
+
+          regulators {
+            sm5703_ldo1: ldo1 {
+              regulator-min-microvolt = <2800000>;
+              regulator-max-microvolt = <2800000>;
+            };
+
+            sm5703_ldo2: ldo2 {
+              regulator-min-microvolt = <1500000>;
+              regulator-max-microvolt = <3300000>;
+            };
+
+            sm5703_ldo3: ldo3 {
+              regulator-min-microvolt = <3300000>;
+              regulator-max-microvolt = <3300000>;
+            };
+
+            sm5703_usbldo1: usbldo1 {
+              regulator-min-microvolt = <4800000>;
+              regulator-max-microvolt = <4800000>;
+            };
+
+            sm5703_usbldo2: usbldo2 {
+              regulator-min-microvolt = <4800000>;
+              regulator-max-microvolt = <4800000>;
+            };
+
+            sm5703_vbus: vbus {
+              regulator-min-microvolt = <5000000>;
+              regulator-max-microvolt = <5000000>;
+            };
+          };
+        };
+      };
+    };
+...
-- 
2.35.1

[PATCH v4 3/4] mfd: sm5703: Add support for SM5703 MFD

[Markuss Broks]

Silicon Mitus SM5703 is a multi-function device, meant to be
used in mobile devices. It has several modules: LDO, BUCK regulators,
charger circuit, flash LED driver, a fuel gauge for monitoring the battery
and a MUIC USB switcher. The MUIC and fuel gauge parts are separate in that
they use separate i2c lines to communicate with the device, while charger
circuit, LED driver and regulators are on the main i2c line the device is
controlled with.

Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
---
 MAINTAINERS                |   8 +++
 drivers/mfd/Kconfig        |  12 +++++
 drivers/mfd/Makefile       |   1 +
 drivers/mfd/sm5703.c       |  81 ++++++++++++++++++++++++++++
 include/linux/mfd/sm5703.h | 105 +++++++++++++++++++++++++++++++++++++
 5 files changed, 207 insertions(+)
 create mode 100644 drivers/mfd/sm5703.c
 create mode 100644 include/linux/mfd/sm5703.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 2a83ac6bfa4d..d3eef171eb8c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17886,6 +17886,14 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git dev
 F:	include/linux/srcu*.h
 F:	kernel/rcu/srcu*.c
 
+SM5703 MFD DRIVER
+M:	Markuss Broks <markuss.broks@gmail.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/mfd/siliconmitus,sm5703.yaml
+F:	Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml
+F:	drivers/mfd/sm5703.c
+F:	drivers/regulator/sm5703-regulator.c
+
 SMACK SECURITY MODULE
 M:	Casey Schaufler <casey@schaufler-ca.com>
 L:	linux-security-module@vger.kernel.org
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index e0d2fcb10a0c..e553a8db24c2 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1223,6 +1223,18 @@ config MFD_SM501
 	  interface. The device may be connected by PCI or local bus with
 	  varying functions enabled.
 
+config MFD_SM5703
+	tristate "Silicon Mitus SM5703 MFD"
+	depends on I2C
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  This is the core driver for the Silicon Mitus SM5703 multi-function
+	  device. This device is meant to be used in phones and it has numerous
+	  modules, including LED controller, regulators, fuel gauge, MUIC and
+	  charger circuit. It also support muxing a serial interface over USB
+	  data lines.
+
 config MFD_SM501_GPIO
 	bool "Export GPIO via GPIO layer"
 	depends on MFD_SM501 && GPIOLIB
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index df1ecc4a4c95..3278069d3461 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -275,3 +275,4 @@ rsmu-i2c-objs			:= rsmu_core.o rsmu_i2c.o
 rsmu-spi-objs			:= rsmu_core.o rsmu_spi.o
 obj-$(CONFIG_MFD_RSMU_I2C)	+= rsmu-i2c.o
 obj-$(CONFIG_MFD_RSMU_SPI)	+= rsmu-spi.o
+obj-$(CONFIG_MFD_SM5703)	+= sm5703.o
diff --git a/drivers/mfd/sm5703.c b/drivers/mfd/sm5703.c
new file mode 100644
index 000000000000..0eb6f257f109
--- /dev/null
+++ b/drivers/mfd/sm5703.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/sm5703.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+static const struct mfd_cell sm5703_devs[] = {
+	{
+		.name = "sm5703-regulator",
+		.of_compatible = "siliconmitus,sm5703-regulator",
+	},
+};
+
+static const struct regmap_config sm5703_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+};
+
+static int sm5703_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
+{
+	struct sm5703_dev *sm5703;
+	struct device *dev = &i2c->dev;
+	unsigned int dev_id;
+	int ret;
+
+	sm5703 = devm_kzalloc(dev, sizeof(*sm5703), GFP_KERNEL);
+	if (!sm5703)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, sm5703);
+	sm5703->dev = dev;
+
+	sm5703->regmap = devm_regmap_init_i2c(i2c, &sm5703_regmap_config);
+	if (IS_ERR(sm5703->regmap))
+		return dev_err_probe(dev, PTR_ERR(sm5703->regmap),
+				     "Failed to allocate the register map\n");
+
+	sm5703->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(sm5703->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(sm5703->reset_gpio), "Cannot get reset GPIO\n");
+
+	gpiod_set_value_cansleep(sm5703->reset_gpio, 1);
+	msleep(20);
+
+	ret = regmap_read(sm5703->regmap, SM5703_DEVICE_ID, &dev_id);
+	if (ret)
+		return dev_err_probe(dev, -ENODEV, "Device not found\n");
+
+	ret = devm_mfd_add_devices(sm5703->dev, -1, sm5703_devs,
+				   ARRAY_SIZE(sm5703_devs), NULL, 0, NULL);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to add child devices\n");
+
+	return 0;
+}
+
+static const struct of_device_id sm5703_of_match[] = {
+	{ .compatible = "siliconmitus,sm5703-mfd", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sm5703_of_match);
+
+static struct i2c_driver sm5703_driver = {
+	.driver = {
+		.name = "sm5703",
+		.of_match_table = sm5703_of_match,
+	},
+	.probe = sm5703_i2c_probe,
+};
+module_i2c_driver(sm5703_driver);
+
+MODULE_DESCRIPTION("Silicon Mitus SM5703 multi-function device driver");
+MODULE_AUTHOR("Markuss Broks <markuss.broks@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/sm5703.h b/include/linux/mfd/sm5703.h
new file mode 100644
index 000000000000..c62affa0d3f1
--- /dev/null
+++ b/include/linux/mfd/sm5703.h
@@ -0,0 +1,105 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _SM5703_H
+#define _SM5703_H
+
+struct sm5703_dev {
+	struct device *dev;
+	struct regmap *regmap;
+	struct gpio_desc *reset_gpio;
+};
+
+// Regulator-related defines
+
+#define SM5703_REG_LDO1				0x1A
+#define SM5703_REG_LDO2				0x1B
+#define SM5703_REG_LDO3				0x1C
+#define SM5703_LDO_EN				BIT(3)
+#define SM5703_LDO_VOLT_MASK			0x7
+#define SM5703_BUCK_VOLT_MASK			0x1F
+#define SM5703_REG_USBLDO12			0x1C
+#define SM5703_REG_EN_USBLDO1			BIT(6)
+#define SM5703_REG_EN_USBLDO2			BIT(7)
+#define SM5703_REG_BUCK				0x1D
+#define SM5703_REG_EN_BUCK			BIT(6)
+#define SM5703_USBLDO_MICROVOLT			4800000
+#define SM5703_VBUS_MICROVOLT			5000000
+
+// Fuel-Gauge-related defines
+
+#define SM5703_FG_REG_DEVICE_ID			0x00
+#define SM5703_FG_REG_CNTL			0x01
+#define SM5703_FG_REG_INTFG			0x02
+#define SM5703_FG_REG_INTFG_MASK		0x03
+#define SM5703_FG_REG_STATUS			0x04
+#define SM5703_FG_REG_SOC			0x05
+#define SM5703_FG_REG_OCV			0x06
+#define SM5703_FG_REG_VOLTAGE			0x07
+#define SM5703_FG_REG_CURRENT			0x08
+#define SM5703_FG_REG_TEMPERATURE		0x09
+#define SM5703_FG_REG_CURRENT_EST		0x85
+#define SM5703_FG_REG_FG_OP_STATUS		0x10
+
+// Flash LED driver-related defines
+
+#define SM5703_FLEDCNTL1			0x14
+#define SM5703_FLEDCNTL2			0x15
+#define SM5703_FLEDCNTL3			0x16
+#define SM5703_FLEDCNTL4			0x17
+#define SM5703_FLEDCNTL5			0x18
+#define SM5703_FLEDCNTL6			0x19
+
+#define SM5703_FLEDEN_MASK			0x03
+#define SM5703_FLEDEN_DISABLE			0x00
+#define SM5703_FLEDEN_MOVIE_MODE		0x01
+#define SM5703_FLEDEN_FLASH_MODE		0x02
+#define SM5703_FLEDEN_EXTERNAL			0x03
+
+#define SM5703_IFLED_MASK			0x1F
+#define SM5703_IMLED_MASK			0x1F
+
+// Charger-related, IRQ and device ID defines
+
+#define SM5703_REG_CNTL				0x0C
+#define SM5703_VBUSCNTL				0x0D
+#define SM5703_CHGCNTL1				0x0E
+#define SM5703_CHGCNTL2				0x0F
+#define SM5703_CHGCNTL3				0x10
+#define SM5703_CHGCNTL4				0x11
+#define SM5703_CHGCNTL5				0x12
+#define SM5703_CHGCNTL6				0x13
+#define SM5703_OTGCURRENTCNTL			0x60
+#define SM5703_Q3LIMITCNTL			0x66
+#define SM5703_DEVICE_ID			0x1E
+#define SM5703_OPERATION_MODE			0x07
+#define SM5703_OPERATION_MODE_MASK		0x07
+
+#define SM5703_OPERATION_MODE_SUSPEND		0x00
+#define SM5703_OPERATION_MODE_CHARGING_OFF	0x04
+#define SM5703_OPERATION_MODE_CHARGING_ON	0x05
+#define SM5703_OPERATION_MODE_FLASH_BOOST_MODE	0x06
+#define SM5703_OPERATION_MODE_USB_OTG_MODE	0x07
+
+#define SM5703_BSTOUT				0x0F
+#define SM5703_BSTOUT_MASK			0x0F
+#define SM5703_BSTOUT_SHIFT			0
+
+#define SM5703_BSTOUT_4P5			0x05
+#define SM5703_BSTOUT_5P0			0x0A
+#define SM5703_BSTOUT_5P1			0x0B
+
+#define SM5703_IRQ_STATUS1			0x08
+#define SM5703_IRQ_STATUS2			0x09
+#define SM5703_IRQ_STATUS3			0x0A
+#define SM5703_IRQ_STATUS4			0x0B
+#define SM5703_IRQ_STATUS5			0x6B
+
+#define SM5703_STATUS1_OTGFAIL			0x80
+#define SM5703_STATUS3_DONE			0x08
+#define SM5703_STATUS3_TOPOFF			0x04
+#define SM5703_STATUS3_CHGON			0x01
+#define SM5703_STATUS5_VBUSOVP			0x80
+#define SM5703_STATUS5_VBUSUVLO			0x40
+#define SM5703_STATUS5_VBUSOK			0x20
+
+#endif
-- 
2.35.1

[PATCH v4 4/4] regulator: sm5703-regulator: Add regulators support for SM5703 MFD

[Markuss Broks]

Regulators block of SM5703 controls several voltage regulators which
are used to power various components. There are 3 LDO outputs ranging
from 1.5 to 3.3V, a buck regulator ranging from 1V to 3V, two fixed
voltage LDO regulators for powering the USB devices and one high-power
fixed voltage LDO line (actually two lines) meant to power high-power
USB devices.

Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
---
 drivers/regulator/Kconfig            |   7 ++
 drivers/regulator/Makefile           |   1 +
 drivers/regulator/sm5703-regulator.c | 162 +++++++++++++++++++++++++++
 3 files changed, 170 insertions(+)
 create mode 100644 drivers/regulator/sm5703-regulator.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 5d0a360d7244..318bbdc27ae4 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1147,6 +1147,13 @@ config REGULATOR_SLG51000
 	  The SLG51000 is seven compact and customizable low dropout
 	  regulators.
 
+config REGULATOR_SM5703
+	tristate "Silicon Mitus SM5703 regulators"
+	depends on SM5703_MFD
+	help
+	  This driver provides support for voltage regulators of SM5703
+	  multi-function device.
+
 config REGULATOR_STM32_BOOSTER
 	tristate "STMicroelectronics STM32 BOOSTER"
 	depends on ARCH_STM32 || COMPILE_TEST
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 4b8794a73e17..c491fe528ba4 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -137,6 +137,7 @@ obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
 obj-$(CONFIG_REGULATOR_SC2731) += sc2731-regulator.o
 obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o
 obj-$(CONFIG_REGULATOR_SLG51000) += slg51000-regulator.o
+obj-$(CONFIG_REGULATOR_SM5703) += sm5703-regulator.o
 obj-$(CONFIG_REGULATOR_STM32_BOOSTER) += stm32-booster.o
 obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
 obj-$(CONFIG_REGULATOR_STM32_PWR) += stm32-pwr.o
diff --git a/drivers/regulator/sm5703-regulator.c b/drivers/regulator/sm5703-regulator.c
new file mode 100644
index 000000000000..41004de69887
--- /dev/null
+++ b/drivers/regulator/sm5703-regulator.c
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/mfd/sm5703.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+enum sm5703_regulators {
+	SM5703_BUCK,
+	SM5703_LDO1,
+	SM5703_LDO2,
+	SM5703_LDO3,
+	SM5703_USBLDO1,
+	SM5703_USBLDO2,
+	SM5703_VBUS,
+	SM5703_MAX_REGULATORS,
+};
+
+static const int sm5703_ldo_voltagemap[] = {
+	1500000, 1800000, 2600000, 2800000, 3000000, 3300000,
+};
+
+static const int sm5703_buck_voltagemap[] = {
+	1000000, 1000000, 1000000, 1000000,
+	1000000, 1000000, 1000000, 1000000,
+	1000000, 1000000, 1000000, 1100000,
+	1200000, 1300000, 1400000, 1500000,
+	1600000, 1700000, 1800000, 1900000,
+	2000000, 2100000, 2200000, 2300000,
+	2400000, 2500000, 2600000, 2700000,
+	2800000, 2900000, 3000000, 3000000,
+};
+
+#define SM5703USBLDO(_name, _id)					\
+	[SM5703_USBLDO ## _id] = {					\
+		.name = _name,						\
+		.of_match = _name,					\
+		.regulators_node = "regulators",			\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = SM5703_USBLDO ## _id,				\
+		.ops = &sm5703_regulator_ops,				\
+		.fixed_uV = SM5703_USBLDO_MICROVOLT,			\
+		.enable_reg = SM5703_REG_USBLDO12,			\
+		.enable_mask = SM5703_REG_EN_USBLDO ##_id,		\
+		.owner			= THIS_MODULE,			\
+	}
+
+#define SM5703VBUS(_name)						\
+	[SM5703_VBUS] = {						\
+		.name = _name,						\
+		.of_match = _name,					\
+		.regulators_node = "regulators",			\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = SM5703_VBUS,					\
+		.ops = &sm5703_regulator_ops,				\
+		.fixed_uV = SM5703_VBUS_MICROVOLT,			\
+		.enable_reg = SM5703_REG_CNTL,				\
+		.enable_mask = SM5703_OPERATION_MODE_MASK,		\
+		.enable_val = SM5703_OPERATION_MODE_USB_OTG_MODE,	\
+		.disable_val = SM5703_OPERATION_MODE_CHARGING_ON,	\
+		.owner			= THIS_MODULE,			\
+	}
+
+#define SM5703BUCK(_name)						\
+	[SM5703_BUCK] = {						\
+		.name = _name,						\
+		.of_match = _name,					\
+		.regulators_node = "regulators",			\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = SM5703_BUCK,					\
+		.ops = &sm5703_regulator_ops,				\
+		.n_voltages = ARRAY_SIZE(sm5703_buck_voltagemap),	\
+		.volt_table = sm5703_buck_voltagemap,			\
+		.vsel_reg = SM5703_REG_BUCK,				\
+		.vsel_mask = SM5703_BUCK_VOLT_MASK,			\
+		.enable_reg = SM5703_REG_BUCK,				\
+		.enable_mask = SM5703_REG_EN_BUCK,			\
+		.owner			= THIS_MODULE,			\
+	}
+
+#define SM5703LDO(_name, _id)						\
+	[SM5703_LDO ## _id] = {						\
+		.name = _name,						\
+		.of_match = _name,					\
+		.regulators_node = "regulators",			\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = SM5703_LDO ## _id,				\
+		.ops = &sm5703_regulator_ops,				\
+		.n_voltages = ARRAY_SIZE(sm5703_ldo_voltagemap),	\
+		.volt_table = sm5703_ldo_voltagemap,			\
+		.vsel_reg = SM5703_REG_LDO ##_id,			\
+		.vsel_mask = SM5703_LDO_VOLT_MASK,			\
+		.enable_reg = SM5703_REG_LDO ##_id,			\
+		.enable_mask = SM5703_LDO_EN,				\
+		.owner			= THIS_MODULE,			\
+	}
+
+static const struct regulator_ops sm5703_regulator_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.list_voltage		= regulator_list_voltage_table,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+};
+
+static struct regulator_desc sm5703_regulators_desc[SM5703_MAX_REGULATORS] = {
+	SM5703BUCK("buck"),
+	SM5703LDO("ldo1", 1),
+	SM5703LDO("ldo2", 2),
+	SM5703LDO("ldo3", 3),
+	SM5703USBLDO("usbldo1", 1),
+	SM5703USBLDO("usbldo2", 2),
+	SM5703VBUS("vbus"),
+};
+
+static int sm5703_regulator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct regulator_config config = { NULL, };
+	struct regulator_dev *rdev;
+	struct sm5703_dev *sm5703 = dev_get_drvdata(pdev->dev.parent);
+	int i;
+
+	config.dev = dev;
+	config.of_node = dev->of_node;
+	config.regmap = sm5703->regmap;
+
+	for (i = 0; i < SM5703_MAX_REGULATORS; i++) {
+		rdev = devm_regulator_register(dev,
+					       &sm5703_regulators_desc[i],
+					       &config);
+		if (IS_ERR(rdev))
+			return dev_err_probe(dev, PTR_ERR(rdev),
+					     "Failed to register a regulator\n");
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id sm5703_regulator_id[] = {
+	{ "sm5703-regulator", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(platform, sm5703_regulator_id);
+
+static struct platform_driver sm5703_regulator_driver = {
+	.driver = {
+		.name = "sm5703-regulator",
+	},
+	.probe	= sm5703_regulator_probe,
+	.id_table	= sm5703_regulator_id,
+};
+
+module_platform_driver(sm5703_regulator_driver);
+
+MODULE_DESCRIPTION("Silicon Mitus SM5703 LDO/Buck/USB regulator driver");
+MODULE_AUTHOR("Markuss Broks <markuss.broks@gmail.com>");
+MODULE_LICENSE("GPL");
-- 
2.35.1

Re: [PATCH v4 1/4] dt-bindings: regulator: Add bindings for Silicon Mitus SM5703 regulators

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 469 bytes --]

On Tue, Apr 19, 2022 at 07:00:54PM +0300, Markuss Broks wrote:

> +description: |
> +  SM5703 regulators node should be a sub node of the SM5703 MFD node. See SM5703 MFD
> +  bindings at Documentation/devicetree/bindings/mfd/siliconmitus,sm5703.yaml

Why is this a separate binding with a compatible rather than just being
part of the main MFD binding?  Alternatively, why aren't the regulators
described individually in the DT (ie, one node/compatible per regulator)?

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v4 1/4] dt-bindings: regulator: Add bindings for Silicon Mitus SM5703 regulators

[Markuss Broks]

Hi Mark,

On 4/19/22 19:56, Mark Brown wrote:
> On Tue, Apr 19, 2022 at 07:00:54PM +0300, Markuss Broks wrote:
>
>> +description: |
>> +  SM5703 regulators node should be a sub node of the SM5703 MFD node. See SM5703 MFD
>> +  bindings at Documentation/devicetree/bindings/mfd/siliconmitus,sm5703.yaml
> Why is this a separate binding with a compatible rather than just being
> part of the main MFD binding?  Alternatively, why aren't the regulators
> described individually in the DT (ie, one node/compatible per regulator)?

I took an example from the rohm,bd71847-pmic.yaml MFD binding, they have 
regulators at a separate regulators { } node, with a separate dt-binding 
for it. I'm not sure what should I do, I'd be more than happy to follow 
a better example if you can show me it.

- Markuss

Re: [PATCH v4 1/4] dt-bindings: regulator: Add bindings for Silicon Mitus SM5703 regulators

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 527 bytes --]

On Tue, Apr 19, 2022 at 08:45:07PM +0300, Markuss Broks wrote:

> I took an example from the rohm,bd71847-pmic.yaml MFD binding, they have
> regulators at a separate regulators { } node, with a separate dt-binding for
> it. I'm not sure what should I do, I'd be more than happy to follow a better
> example if you can show me it.

Basically either just remove the compatible and have the MFD directly
instantiate the device like sky81452 or put a separate node for each
regualtor like wm831x does (but without any DT support).

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v4 2/4] dt-bindings: mfd: Add bindings for Silicon Mitus SM5703 MFD

[Rob Herring]

On Tue, 19 Apr 2022 19:00:55 +0300, Markuss Broks wrote:
> This patch adds device-tree bindings for the Silicon Mitus
> SM5703 MFD.
> 
> Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
> ---
>  .../bindings/mfd/siliconmitus,sm5703.yaml     | 96 +++++++++++++++++++
>  1 file changed, 96 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/siliconmitus,sm5703.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
schemas/regulator/siliconmitus,sm5703-regulator.yaml: ignoring, error parsing file
Error: Documentation/devicetree/bindings/mfd/siliconmitus,sm5703.example.dts:27.40-41 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:364: Documentation/devicetree/bindings/mfd/siliconmitus,sm5703.example.dtb] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1401: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

Re: [PATCH v4 1/4] dt-bindings: regulator: Add bindings for Silicon Mitus SM5703 regulators

[Matti Vaittinen]

On Fri, Apr 22, 2022 at 8:36 PM Markuss Broks <markuss.broks@gmail.com> wrote:
>
> This patch adds device-tree bindings for regulators on Silicon Mitus
> SM5703 MFD.
>
> Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
> ---
>  .../siliconmitus,sm5703-regulator.yaml        | 52 +++++++++++++++++++
>  1 file changed, 52 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml
>
> diff --git a/Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml b/Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml
> new file mode 100644
> index 000000000000..a8ffd3ecf3a5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml
> @@ -0,0 +1,52 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/regulator/siliconmitus,sm5703-regulator.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Silicon Mitus SM5703 multi function device regulators
> +
> +maintainers:
> +  - Markuss Broks <markuss.broks@gmail.com>
> +
> +description: |
> +  SM5703 regulators node should be a sub node of the SM5703 MFD node. See SM5703 MFD
> +  bindings at Documentation/devicetree/bindings/mfd/siliconmitus,sm5703.yaml
> +  Regulator nodes should be named as USBLDO_<number>, BUCK, VBUS, LDO_<number>.
> +  The definition for each of these nodes is defined using the standard
> +  binding for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.

Maybe It'd be better to nowadays refer to the regulators.yaml

Best Regards
-- Matti Vaittinen

Re: [PATCH v4 1/4] dt-bindings: regulator: Add bindings for Silicon Mitus SM5703 regulators

[Matti Vaittinen]

On Fri, Apr 22, 2022 at 9:05 PM Mark Brown <broonie@kernel.org> wrote:
>
> On Tue, Apr 19, 2022 at 08:45:07PM +0300, Markuss Broks wrote:
>
> > I took an example from the rohm,bd71847-pmic.yaml MFD binding, they have
> > regulators at a separate regulators { } node, with a separate dt-binding for
> > it. I'm not sure what should I do, I'd be more than happy to follow a better
> > example if you can show me it.
>
> Basically either just remove the compatible and have the MFD directly
> instantiate the device like sky81452 or put a separate node for each
> regualtor like wm831x does (but without any DT support).

Just a note that the BD71847 does not have own "compatible" for the
regulators. There's only "compatible" in the MFD node - and MFD just
kicks the regulator driver. Regulators get the handle to the node from
the parent device. I think it should serve as a valid example of what
Mark described as

> Basically either just remove the compatible and have the MFD directly
> instantiate the device


Best Regards
-- Matti Vaittinen