From: Jakub Kicinski <kuba@kernel.org>
To: davem@davemloft.net, pabeni@redhat.com
Cc: netdev@vger.kernel.org, Jakub Kicinski <kuba@kernel.org>,
Chas Williams <3chas3@gmail.com>,
linux-atm-general@lists.sourceforge.net,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
linux-mips@vger.kernel.org, arnd@arndb.de
Subject: [PATCH net-next 3/6] net: atm: remove support for ZeitNet ZN122x ATM devices
Date: Tue, 26 Apr 2022 10:54:33 -0700 [thread overview]
Message-ID: <20220426175436.417283-4-kuba@kernel.org> (raw)
In-Reply-To: <20220426175436.417283-1-kuba@kernel.org>
This driver received nothing but automated fixes in the last 15 years.
Since it's using virt_to_bus it's unlikely to be used on any modern
platform.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
CC: Chas Williams <3chas3@gmail.com>
CC: linux-atm-general@lists.sourceforge.net
CC: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CC: linux-mips@vger.kernel.org
CC: arnd@arndb.de
---
arch/mips/configs/gpr_defconfig | 1 -
arch/mips/configs/mtx1_defconfig | 1 -
drivers/atm/Kconfig | 20 -
drivers/atm/Makefile | 1 -
drivers/atm/uPD98401.h | 293 ------
drivers/atm/uPD98402.c | 266 -----
drivers/atm/uPD98402.h | 107 --
drivers/atm/zatm.c | 1652 ------------------------------
drivers/atm/zatm.h | 104 --
include/uapi/linux/atm_zatm.h | 47 -
10 files changed, 2492 deletions(-)
delete mode 100644 drivers/atm/uPD98401.h
delete mode 100644 drivers/atm/uPD98402.c
delete mode 100644 drivers/atm/uPD98402.h
delete mode 100644 drivers/atm/zatm.c
delete mode 100644 drivers/atm/zatm.h
delete mode 100644 include/uapi/linux/atm_zatm.h
diff --git a/arch/mips/configs/gpr_defconfig b/arch/mips/configs/gpr_defconfig
index 7ed202db9ef0..d82f4ebf687f 100644
--- a/arch/mips/configs/gpr_defconfig
+++ b/arch/mips/configs/gpr_defconfig
@@ -178,7 +178,6 @@ CONFIG_NETCONSOLE=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
-CONFIG_ATM_ZATM=m
CONFIG_ATM_NICSTAR=m
CONFIG_ATM_IDT77252=m
CONFIG_ATM_IA=m
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index f46ad2e294fa..0cb4d9aa14d1 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -255,7 +255,6 @@ CONFIG_ARCNET_COM20020_CS=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
-CONFIG_ATM_ZATM=m
CONFIG_ATM_NICSTAR=m
CONFIG_ATM_IDT77252=m
CONFIG_ATM_IA=m
diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig
index 9c778308722a..63cdb46a3439 100644
--- a/drivers/atm/Kconfig
+++ b/drivers/atm/Kconfig
@@ -146,26 +146,6 @@ config ATM_ENI_BURST_RX_2W
try this if you have disabled 4W and 8W bursts. Enabling 2W if 4W or
8W are also set may or may not improve throughput.
-config ATM_ZATM
- tristate "ZeitNet ZN1221/ZN1225"
- depends on PCI && VIRT_TO_BUS
- help
- Driver for the ZeitNet ZN1221 (MMF) and ZN1225 (UTP-5) 155 Mbps ATM
- adapters.
-
- To compile this driver as a module, choose M here: the module will
- be called zatm.
-
-config ATM_ZATM_DEBUG
- bool "Enable extended debugging"
- depends on ATM_ZATM
- help
- Extended debugging records various events and displays that list
- when an inconsistency is detected. This mechanism is faster than
- generally using printks, but still has some impact on performance.
- Note that extended debugging may create certain race conditions
- itself. Enable this ONLY if you suspect problems with the driver.
-
config ATM_NICSTAR
tristate "IDT 77201 (NICStAR) (ForeRunnerLE)"
depends on PCI
diff --git a/drivers/atm/Makefile b/drivers/atm/Makefile
index 1b6a8ddaf007..c9eade92019b 100644
--- a/drivers/atm/Makefile
+++ b/drivers/atm/Makefile
@@ -5,7 +5,6 @@
fore_200e-y := fore200e.o
-obj-$(CONFIG_ATM_ZATM) += zatm.o uPD98402.o
obj-$(CONFIG_ATM_NICSTAR) += nicstar.o
obj-$(CONFIG_ATM_IA) += iphase.o suni.o
obj-$(CONFIG_ATM_FORE200E) += fore_200e.o
diff --git a/drivers/atm/uPD98401.h b/drivers/atm/uPD98401.h
deleted file mode 100644
index f766a5ef0c5d..000000000000
--- a/drivers/atm/uPD98401.h
+++ /dev/null
@@ -1,293 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* drivers/atm/uPD98401.h - NEC uPD98401 (SAR) declarations */
-
-/* Written 1995 by Werner Almesberger, EPFL LRC */
-
-
-#ifndef DRIVERS_ATM_uPD98401_H
-#define DRIVERS_ATM_uPD98401_H
-
-
-#define MAX_CRAM_SIZE (1 << 18) /* 2^18 words */
-#define RAM_INCREMENT 1024 /* check in 4 kB increments */
-
-#define uPD98401_PORTS 0x24 /* probably more ? */
-
-
-/*
- * Commands
- */
-
-#define uPD98401_OPEN_CHAN 0x20000000 /* open channel */
-#define uPD98401_CHAN_ADDR 0x0003fff8 /* channel address */
-#define uPD98401_CHAN_ADDR_SHIFT 3
-#define uPD98401_CLOSE_CHAN 0x24000000 /* close channel */
-#define uPD98401_CHAN_RT 0x02000000 /* RX/TX (0 TX, 1 RX) */
-#define uPD98401_DEACT_CHAN 0x28000000 /* deactivate channel */
-#define uPD98401_TX_READY 0x30000000 /* TX ready */
-#define uPD98401_ADD_BAT 0x34000000 /* add batches */
-#define uPD98401_POOL 0x000f0000 /* pool number */
-#define uPD98401_POOL_SHIFT 16
-#define uPD98401_POOL_NUMBAT 0x0000ffff /* number of batches */
-#define uPD98401_NOP 0x3f000000 /* NOP */
-#define uPD98401_IND_ACC 0x00000000 /* Indirect Access */
-#define uPD98401_IA_RW 0x10000000 /* Read/Write (0 W, 1 R) */
-#define uPD98401_IA_B3 0x08000000 /* Byte select, 1 enable */
-#define uPD98401_IA_B2 0x04000000
-#define uPD98401_IA_B1 0x02000000
-#define uPD98401_IA_B0 0x01000000
-#define uPD98401_IA_BALL 0x0f000000 /* whole longword */
-#define uPD98401_IA_TGT 0x000c0000 /* Target */
-#define uPD98401_IA_TGT_SHIFT 18
-#define uPD98401_IA_TGT_CM 0 /* - Control Memory */
-#define uPD98401_IA_TGT_SAR 1 /* - uPD98401 registers */
-#define uPD98401_IA_TGT_PHY 3 /* - PHY device */
-#define uPD98401_IA_ADDR 0x0003ffff
-
-/*
- * Command Register Status
- */
-
-#define uPD98401_BUSY 0x80000000 /* SAR is busy */
-#define uPD98401_LOCKED 0x40000000 /* SAR is locked by other CPU */
-
-/*
- * Indications
- */
-
-/* Normal (AAL5) Receive Indication */
-#define uPD98401_AAL5_UINFO 0xffff0000 /* user-supplied information */
-#define uPD98401_AAL5_UINFO_SHIFT 16
-#define uPD98401_AAL5_SIZE 0x0000ffff /* PDU size (in _CELLS_ !!) */
-#define uPD98401_AAL5_CHAN 0x7fff0000 /* Channel number */
-#define uPD98401_AAL5_CHAN_SHIFT 16
-#define uPD98401_AAL5_ERR 0x00008000 /* Error indication */
-#define uPD98401_AAL5_CI 0x00004000 /* Congestion Indication */
-#define uPD98401_AAL5_CLP 0x00002000 /* CLP (>= 1 cell had CLP=1) */
-#define uPD98401_AAL5_ES 0x00000f00 /* Error Status */
-#define uPD98401_AAL5_ES_SHIFT 8
-#define uPD98401_AAL5_ES_NONE 0 /* No error */
-#define uPD98401_AAL5_ES_FREE 1 /* Receiver free buf underflow */
-#define uPD98401_AAL5_ES_FIFO 2 /* Receiver FIFO overrun */
-#define uPD98401_AAL5_ES_TOOBIG 3 /* Maximum length violation */
-#define uPD98401_AAL5_ES_CRC 4 /* CRC error */
-#define uPD98401_AAL5_ES_ABORT 5 /* User abort */
-#define uPD98401_AAL5_ES_LENGTH 6 /* Length violation */
-#define uPD98401_AAL5_ES_T1 7 /* T1 error (timeout) */
-#define uPD98401_AAL5_ES_DEACT 8 /* Deactivated with DEACT_CHAN */
-#define uPD98401_AAL5_POOL 0x0000001f /* Free buffer pool number */
-
-/* Raw Cell Indication */
-#define uPD98401_RAW_UINFO uPD98401_AAL5_UINFO
-#define uPD98401_RAW_UINFO_SHIFT uPD98401_AAL5_UINFO_SHIFT
-#define uPD98401_RAW_HEC 0x000000ff /* HEC */
-#define uPD98401_RAW_CHAN uPD98401_AAL5_CHAN
-#define uPD98401_RAW_CHAN_SHIFT uPD98401_AAL5_CHAN_SHIFT
-
-/* Transmit Indication */
-#define uPD98401_TXI_CONN 0x7fff0000 /* Connection Number */
-#define uPD98401_TXI_CONN_SHIFT 16
-#define uPD98401_TXI_ACTIVE 0x00008000 /* Channel remains active */
-#define uPD98401_TXI_PQP 0x00007fff /* Packet Queue Pointer */
-
-/*
- * Directly Addressable Registers
- */
-
-#define uPD98401_GMR 0x00 /* General Mode Register */
-#define uPD98401_GSR 0x01 /* General Status Register */
-#define uPD98401_IMR 0x02 /* Interrupt Mask Register */
-#define uPD98401_RQU 0x03 /* Receive Queue Underrun */
-#define uPD98401_RQA 0x04 /* Receive Queue Alert */
-#define uPD98401_ADDR 0x05 /* Last Burst Address */
-#define uPD98401_VER 0x06 /* Version Number */
-#define uPD98401_SWR 0x07 /* Software Reset */
-#define uPD98401_CMR 0x08 /* Command Register */
-#define uPD98401_CMR_L 0x09 /* Command Register and Lock/Unlock */
-#define uPD98401_CER 0x0a /* Command Extension Register */
-#define uPD98401_CER_L 0x0b /* Command Ext Reg and Lock/Unlock */
-
-#define uPD98401_MSH(n) (0x10+(n)) /* Mailbox n Start Address High */
-#define uPD98401_MSL(n) (0x14+(n)) /* Mailbox n Start Address High */
-#define uPD98401_MBA(n) (0x18+(n)) /* Mailbox n Bottom Address */
-#define uPD98401_MTA(n) (0x1c+(n)) /* Mailbox n Tail Address */
-#define uPD98401_MWA(n) (0x20+(n)) /* Mailbox n Write Address */
-
-/* GMR is at 0x00 */
-#define uPD98401_GMR_ONE 0x80000000 /* Must be set to one */
-#define uPD98401_GMR_SLM 0x40000000 /* Address mode (0 word, 1 byte) */
-#define uPD98401_GMR_CPE 0x00008000 /* Control Memory Parity Enable */
-#define uPD98401_GMR_LP 0x00004000 /* Loopback */
-#define uPD98401_GMR_WA 0x00002000 /* Early Bus Write Abort/RDY */
-#define uPD98401_GMR_RA 0x00001000 /* Early Read Abort/RDY */
-#define uPD98401_GMR_SZ 0x00000f00 /* Burst Size Enable */
-#define uPD98401_BURST16 0x00000800 /* 16-word burst */
-#define uPD98401_BURST8 0x00000400 /* 8-word burst */
-#define uPD98401_BURST4 0x00000200 /* 4-word burst */
-#define uPD98401_BURST2 0x00000100 /* 2-word burst */
-#define uPD98401_GMR_AD 0x00000080 /* Address (burst resolution) Disable */
-#define uPD98401_GMR_BO 0x00000040 /* Byte Order (0 little, 1 big) */
-#define uPD98401_GMR_PM 0x00000020 /* Bus Parity Mode (0 byte, 1 word)*/
-#define uPD98401_GMR_PC 0x00000010 /* Bus Parity Control (0even,1odd) */
-#define uPD98401_GMR_BPE 0x00000008 /* Bus Parity Enable */
-#define uPD98401_GMR_DR 0x00000004 /* Receive Drop Mode (0drop,1don't)*/
-#define uPD98401_GMR_SE 0x00000002 /* Shapers Enable */
-#define uPD98401_GMR_RE 0x00000001 /* Receiver Enable */
-
-/* GSR is at 0x01, IMR is at 0x02 */
-#define uPD98401_INT_PI 0x80000000 /* PHY interrupt */
-#define uPD98401_INT_RQA 0x40000000 /* Receive Queue Alert */
-#define uPD98401_INT_RQU 0x20000000 /* Receive Queue Underrun */
-#define uPD98401_INT_RD 0x10000000 /* Receiver Deactivated */
-#define uPD98401_INT_SPE 0x08000000 /* System Parity Error */
-#define uPD98401_INT_CPE 0x04000000 /* Control Memory Parity Error */
-#define uPD98401_INT_SBE 0x02000000 /* System Bus Error */
-#define uPD98401_INT_IND 0x01000000 /* Initialization Done */
-#define uPD98401_INT_RCR 0x0000ff00 /* Raw Cell Received */
-#define uPD98401_INT_RCR_SHIFT 8
-#define uPD98401_INT_MF 0x000000f0 /* Mailbox Full */
-#define uPD98401_INT_MF_SHIFT 4
-#define uPD98401_INT_MM 0x0000000f /* Mailbox Modified */
-
-/* VER is at 0x06 */
-#define uPD98401_MAJOR 0x0000ff00 /* Major revision */
-#define uPD98401_MAJOR_SHIFT 8
-#define uPD98401_MINOR 0x000000ff /* Minor revision */
-
-/*
- * Indirectly Addressable Registers
- */
-
-#define uPD98401_IM(n) (0x40000+(n)) /* Scheduler n I and M */
-#define uPD98401_X(n) (0x40010+(n)) /* Scheduler n X */
-#define uPD98401_Y(n) (0x40020+(n)) /* Scheduler n Y */
-#define uPD98401_PC(n) (0x40030+(n)) /* Scheduler n P, C, p and c */
-#define uPD98401_PS(n) (0x40040+(n)) /* Scheduler n priority and status */
-
-/* IM contents */
-#define uPD98401_IM_I 0xff000000 /* I */
-#define uPD98401_IM_I_SHIFT 24
-#define uPD98401_IM_M 0x00ffffff /* M */
-
-/* PC contents */
-#define uPD98401_PC_P 0xff000000 /* P */
-#define uPD98401_PC_P_SHIFT 24
-#define uPD98401_PC_C 0x00ff0000 /* C */
-#define uPD98401_PC_C_SHIFT 16
-#define uPD98401_PC_p 0x0000ff00 /* p */
-#define uPD98401_PC_p_SHIFT 8
-#define uPD98401_PC_c 0x000000ff /* c */
-
-/* PS contents */
-#define uPD98401_PS_PRIO 0xf0 /* Priority level (0 high, 15 low) */
-#define uPD98401_PS_PRIO_SHIFT 4
-#define uPD98401_PS_S 0x08 /* Scan - must be 0 (internal) */
-#define uPD98401_PS_R 0x04 /* Round Robin (internal) */
-#define uPD98401_PS_A 0x02 /* Active (internal) */
-#define uPD98401_PS_E 0x01 /* Enabled */
-
-#define uPD98401_TOS 0x40100 /* Top of Stack Control Memory Address */
-#define uPD98401_SMA 0x40200 /* Shapers Control Memory Start Address */
-#define uPD98401_PMA 0x40201 /* Receive Pool Control Memory Start Address */
-#define uPD98401_T1R 0x40300 /* T1 Register */
-#define uPD98401_VRR 0x40301 /* VPI/VCI Reduction Register/Recv. Shutdown */
-#define uPD98401_TSR 0x40302 /* Time-Stamp Register */
-
-/* VRR is at 0x40301 */
-#define uPD98401_VRR_SDM 0x80000000 /* Shutdown Mode */
-#define uPD98401_VRR_SHIFT 0x000f0000 /* VPI/VCI Shift */
-#define uPD98401_VRR_SHIFT_SHIFT 16
-#define uPD98401_VRR_MASK 0x0000ffff /* VPI/VCI mask */
-
-/*
- * TX packet descriptor
- */
-
-#define uPD98401_TXPD_SIZE 16 /* descriptor size (in bytes) */
-
-#define uPD98401_TXPD_V 0x80000000 /* Valid bit */
-#define uPD98401_TXPD_DP 0x40000000 /* Descriptor (1) or Pointer (0) */
-#define uPD98401_TXPD_SM 0x20000000 /* Single (1) or Multiple (0) */
-#define uPD98401_TXPD_CLPM 0x18000000 /* CLP mode */
-#define uPD98401_CLPM_0 0 /* 00 CLP = 0 */
-#define uPD98401_CLPM_1 3 /* 11 CLP = 1 */
-#define uPD98401_CLPM_LAST 1 /* 01 CLP unless last cell */
-#define uPD98401_TXPD_CLPM_SHIFT 27
-#define uPD98401_TXPD_PTI 0x07000000 /* PTI pattern */
-#define uPD98401_TXPD_PTI_SHIFT 24
-#define uPD98401_TXPD_GFC 0x00f00000 /* GFC pattern */
-#define uPD98401_TXPD_GFC_SHIFT 20
-#define uPD98401_TXPD_C10 0x00040000 /* insert CRC-10 */
-#define uPD98401_TXPD_AAL5 0x00020000 /* AAL5 processing */
-#define uPD98401_TXPD_MB 0x00010000 /* TX mailbox number */
-#define uPD98401_TXPD_UU 0x0000ff00 /* CPCS-UU */
-#define uPD98401_TXPD_UU_SHIFT 8
-#define uPD98401_TXPD_CPI 0x000000ff /* CPI */
-
-/*
- * TX buffer descriptor
- */
-
-#define uPD98401_TXBD_SIZE 8 /* descriptor size (in bytes) */
-
-#define uPD98401_TXBD_LAST 0x80000000 /* last buffer in packet */
-
-/*
- * TX VC table
- */
-
-/* 1st word has the same structure as in a TX packet descriptor */
-#define uPD98401_TXVC_L 0x80000000 /* last buffer */
-#define uPD98401_TXVC_SHP 0x0f000000 /* shaper number */
-#define uPD98401_TXVC_SHP_SHIFT 24
-#define uPD98401_TXVC_VPI 0x00ff0000 /* VPI */
-#define uPD98401_TXVC_VPI_SHIFT 16
-#define uPD98401_TXVC_VCI 0x0000ffff /* VCI */
-#define uPD98401_TXVC_QRP 6 /* Queue Read Pointer is in word 6 */
-
-/*
- * RX free buffer pools descriptor
- */
-
-#define uPD98401_RXFP_ALERT 0x70000000 /* low water mark */
-#define uPD98401_RXFP_ALERT_SHIFT 28
-#define uPD98401_RXFP_BFSZ 0x0f000000 /* buffer size, 64*2^n */
-#define uPD98401_RXFP_BFSZ_SHIFT 24
-#define uPD98401_RXFP_BTSZ 0x00ff0000 /* batch size, n+1 */
-#define uPD98401_RXFP_BTSZ_SHIFT 16
-#define uPD98401_RXFP_REMAIN 0x0000ffff /* remaining batches in pool */
-
-/*
- * RX VC table
- */
-
-#define uPD98401_RXVC_BTSZ 0xff000000 /* remaining free buffers in batch */
-#define uPD98401_RXVC_BTSZ_SHIFT 24
-#define uPD98401_RXVC_MB 0x00200000 /* RX mailbox number */
-#define uPD98401_RXVC_POOL 0x001f0000 /* free buffer pool number */
-#define uPD98401_RXVC_POOL_SHIFT 16
-#define uPD98401_RXVC_UINFO 0x0000ffff /* user-supplied information */
-#define uPD98401_RXVC_T1 0xffff0000 /* T1 timestamp */
-#define uPD98401_RXVC_T1_SHIFT 16
-#define uPD98401_RXVC_PR 0x00008000 /* Packet Reception, 1 if busy */
-#define uPD98401_RXVC_DR 0x00004000 /* FIFO Drop */
-#define uPD98401_RXVC_OD 0x00001000 /* Drop OAM cells */
-#define uPD98401_RXVC_AR 0x00000800 /* AAL5 or raw cell; 1 if AAL5 */
-#define uPD98401_RXVC_MAXSEG 0x000007ff /* max number of segments per PDU */
-#define uPD98401_RXVC_REM 0xfffe0000 /* remaining words in curr buffer */
-#define uPD98401_RXVC_REM_SHIFT 17
-#define uPD98401_RXVC_CLP 0x00010000 /* CLP received */
-#define uPD98401_RXVC_BFA 0x00008000 /* Buffer Assigned */
-#define uPD98401_RXVC_BTA 0x00004000 /* Batch Assigned */
-#define uPD98401_RXVC_CI 0x00002000 /* Congestion Indication */
-#define uPD98401_RXVC_DD 0x00001000 /* Dropping incoming cells */
-#define uPD98401_RXVC_DP 0x00000800 /* like PR ? */
-#define uPD98401_RXVC_CURSEG 0x000007ff /* Current Segment count */
-
-/*
- * RX lookup table
- */
-
-#define uPD98401_RXLT_ENBL 0x8000 /* Enable */
-
-#endif
diff --git a/drivers/atm/uPD98402.c b/drivers/atm/uPD98402.c
deleted file mode 100644
index 239852d85558..000000000000
--- a/drivers/atm/uPD98402.c
+++ /dev/null
@@ -1,266 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/* drivers/atm/uPD98402.c - NEC uPD98402 (PHY) declarations */
-
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
-
-
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/atmdev.h>
-#include <linux/sonet.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/uaccess.h>
-#include <linux/atomic.h>
-
-#include "uPD98402.h"
-
-
-#if 0
-#define DPRINTK(format,args...) printk(KERN_DEBUG format,##args)
-#else
-#define DPRINTK(format,args...)
-#endif
-
-
-struct uPD98402_priv {
- struct k_sonet_stats sonet_stats;/* link diagnostics */
- unsigned char framing; /* SONET/SDH framing */
- int loop_mode; /* loopback mode */
- spinlock_t lock;
-};
-
-
-#define PRIV(dev) ((struct uPD98402_priv *) dev->phy_data)
-
-#define PUT(val,reg) dev->ops->phy_put(dev,val,uPD98402_##reg)
-#define GET(reg) dev->ops->phy_get(dev,uPD98402_##reg)
-
-
-static int fetch_stats(struct atm_dev *dev,struct sonet_stats __user *arg,int zero)
-{
- struct sonet_stats tmp;
- int error = 0;
-
- atomic_add(GET(HECCT),&PRIV(dev)->sonet_stats.uncorr_hcs);
- sonet_copy_stats(&PRIV(dev)->sonet_stats,&tmp);
- if (arg) error = copy_to_user(arg,&tmp,sizeof(tmp));
- if (zero && !error) {
- /* unused fields are reported as -1, but we must not "adjust"
- them */
- tmp.corr_hcs = tmp.tx_cells = tmp.rx_cells = 0;
- sonet_subtract_stats(&PRIV(dev)->sonet_stats,&tmp);
- }
- return error ? -EFAULT : 0;
-}
-
-
-static int set_framing(struct atm_dev *dev,unsigned char framing)
-{
- static const unsigned char sonet[] = { 1,2,3,0 };
- static const unsigned char sdh[] = { 1,0,0,2 };
- const char *set;
- unsigned long flags;
-
- switch (framing) {
- case SONET_FRAME_SONET:
- set = sonet;
- break;
- case SONET_FRAME_SDH:
- set = sdh;
- break;
- default:
- return -EINVAL;
- }
- spin_lock_irqsave(&PRIV(dev)->lock, flags);
- PUT(set[0],C11T);
- PUT(set[1],C12T);
- PUT(set[2],C13T);
- PUT((GET(MDR) & ~uPD98402_MDR_SS_MASK) | (set[3] <<
- uPD98402_MDR_SS_SHIFT),MDR);
- spin_unlock_irqrestore(&PRIV(dev)->lock, flags);
- return 0;
-}
-
-
-static int get_sense(struct atm_dev *dev,u8 __user *arg)
-{
- unsigned long flags;
- unsigned char s[3];
-
- spin_lock_irqsave(&PRIV(dev)->lock, flags);
- s[0] = GET(C11R);
- s[1] = GET(C12R);
- s[2] = GET(C13R);
- spin_unlock_irqrestore(&PRIV(dev)->lock, flags);
- return (put_user(s[0], arg) || put_user(s[1], arg+1) ||
- put_user(s[2], arg+2) || put_user(0xff, arg+3) ||
- put_user(0xff, arg+4) || put_user(0xff, arg+5)) ? -EFAULT : 0;
-}
-
-
-static int set_loopback(struct atm_dev *dev,int mode)
-{
- unsigned char mode_reg;
-
- mode_reg = GET(MDR) & ~(uPD98402_MDR_TPLP | uPD98402_MDR_ALP |
- uPD98402_MDR_RPLP);
- switch (__ATM_LM_XTLOC(mode)) {
- case __ATM_LM_NONE:
- break;
- case __ATM_LM_PHY:
- mode_reg |= uPD98402_MDR_TPLP;
- break;
- case __ATM_LM_ATM:
- mode_reg |= uPD98402_MDR_ALP;
- break;
- default:
- return -EINVAL;
- }
- switch (__ATM_LM_XTRMT(mode)) {
- case __ATM_LM_NONE:
- break;
- case __ATM_LM_PHY:
- mode_reg |= uPD98402_MDR_RPLP;
- break;
- default:
- return -EINVAL;
- }
- PUT(mode_reg,MDR);
- PRIV(dev)->loop_mode = mode;
- return 0;
-}
-
-
-static int uPD98402_ioctl(struct atm_dev *dev,unsigned int cmd,void __user *arg)
-{
- switch (cmd) {
-
- case SONET_GETSTATZ:
- case SONET_GETSTAT:
- return fetch_stats(dev,arg, cmd == SONET_GETSTATZ);
- case SONET_SETFRAMING:
- return set_framing(dev, (int)(unsigned long)arg);
- case SONET_GETFRAMING:
- return put_user(PRIV(dev)->framing,(int __user *)arg) ?
- -EFAULT : 0;
- case SONET_GETFRSENSE:
- return get_sense(dev,arg);
- case ATM_SETLOOP:
- return set_loopback(dev, (int)(unsigned long)arg);
- case ATM_GETLOOP:
- return put_user(PRIV(dev)->loop_mode,(int __user *)arg) ?
- -EFAULT : 0;
- case ATM_QUERYLOOP:
- return put_user(ATM_LM_LOC_PHY | ATM_LM_LOC_ATM |
- ATM_LM_RMT_PHY,(int __user *)arg) ? -EFAULT : 0;
- default:
- return -ENOIOCTLCMD;
- }
-}
-
-
-#define ADD_LIMITED(s,v) \
- { atomic_add(GET(v),&PRIV(dev)->sonet_stats.s); \
- if (atomic_read(&PRIV(dev)->sonet_stats.s) < 0) \
- atomic_set(&PRIV(dev)->sonet_stats.s,INT_MAX); }
-
-
-static void stat_event(struct atm_dev *dev)
-{
- unsigned char events;
-
- events = GET(PCR);
- if (events & uPD98402_PFM_PFEB) ADD_LIMITED(path_febe,PFECB);
- if (events & uPD98402_PFM_LFEB) ADD_LIMITED(line_febe,LECCT);
- if (events & uPD98402_PFM_B3E) ADD_LIMITED(path_bip,B3ECT);
- if (events & uPD98402_PFM_B2E) ADD_LIMITED(line_bip,B2ECT);
- if (events & uPD98402_PFM_B1E) ADD_LIMITED(section_bip,B1ECT);
-}
-
-
-#undef ADD_LIMITED
-
-
-static void uPD98402_int(struct atm_dev *dev)
-{
- static unsigned long silence = 0;
- unsigned char reason;
-
- while ((reason = GET(PICR))) {
- if (reason & uPD98402_INT_LOS)
- printk(KERN_NOTICE "%s(itf %d): signal lost\n",
- dev->type,dev->number);
- if (reason & uPD98402_INT_PFM) stat_event(dev);
- if (reason & uPD98402_INT_PCO) {
- (void) GET(PCOCR); /* clear interrupt cause */
- atomic_add(GET(HECCT),
- &PRIV(dev)->sonet_stats.uncorr_hcs);
- }
- if ((reason & uPD98402_INT_RFO) &&
- (time_after(jiffies, silence) || silence == 0)) {
- printk(KERN_WARNING "%s(itf %d): uPD98402 receive "
- "FIFO overflow\n",dev->type,dev->number);
- silence = (jiffies+HZ/2)|1;
- }
- }
-}
-
-
-static int uPD98402_start(struct atm_dev *dev)
-{
- DPRINTK("phy_start\n");
- if (!(dev->phy_data = kmalloc(sizeof(struct uPD98402_priv),GFP_KERNEL)))
- return -ENOMEM;
- spin_lock_init(&PRIV(dev)->lock);
- memset(&PRIV(dev)->sonet_stats,0,sizeof(struct k_sonet_stats));
- (void) GET(PCR); /* clear performance events */
- PUT(uPD98402_PFM_FJ,PCMR); /* ignore frequency adj */
- (void) GET(PCOCR); /* clear overflows */
- PUT(~uPD98402_PCO_HECC,PCOMR);
- (void) GET(PICR); /* clear interrupts */
- PUT(~(uPD98402_INT_PFM | uPD98402_INT_ALM | uPD98402_INT_RFO |
- uPD98402_INT_LOS),PIMR); /* enable them */
- (void) fetch_stats(dev,NULL,1); /* clear kernel counters */
- atomic_set(&PRIV(dev)->sonet_stats.corr_hcs,-1);
- atomic_set(&PRIV(dev)->sonet_stats.tx_cells,-1);
- atomic_set(&PRIV(dev)->sonet_stats.rx_cells,-1);
- return 0;
-}
-
-
-static int uPD98402_stop(struct atm_dev *dev)
-{
- /* let SAR driver worry about stopping interrupts */
- kfree(PRIV(dev));
- return 0;
-}
-
-
-static const struct atmphy_ops uPD98402_ops = {
- .start = uPD98402_start,
- .ioctl = uPD98402_ioctl,
- .interrupt = uPD98402_int,
- .stop = uPD98402_stop,
-};
-
-
-int uPD98402_init(struct atm_dev *dev)
-{
-DPRINTK("phy_init\n");
- dev->phy = &uPD98402_ops;
- return 0;
-}
-
-
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(uPD98402_init);
-
-static __init int uPD98402_module_init(void)
-{
- return 0;
-}
-module_init(uPD98402_module_init);
-/* module_exit not defined so not unloadable */
diff --git a/drivers/atm/uPD98402.h b/drivers/atm/uPD98402.h
deleted file mode 100644
index 437cfaa20c96..000000000000
--- a/drivers/atm/uPD98402.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* drivers/atm/uPD98402.h - NEC uPD98402 (PHY) declarations */
-
-/* Written 1995 by Werner Almesberger, EPFL LRC */
-
-
-#ifndef DRIVERS_ATM_uPD98402_H
-#define DRIVERS_ATM_uPD98402_H
-
-/*
- * Registers
- */
-
-#define uPD98402_CMR 0x00 /* Command Register */
-#define uPD98402_MDR 0x01 /* Mode Register */
-#define uPD98402_PICR 0x02 /* PHY Interrupt Cause Register */
-#define uPD98402_PIMR 0x03 /* PHY Interrupt Mask Register */
-#define uPD98402_ACR 0x04 /* Alarm Cause Register */
-#define uPD98402_ACMR 0x05 /* Alarm Cause Mask Register */
-#define uPD98402_PCR 0x06 /* Performance Cause Register */
-#define uPD98402_PCMR 0x07 /* Performance Cause Mask Register */
-#define uPD98402_IACM 0x08 /* Internal Alarm Cause Mask Register */
-#define uPD98402_B1ECT 0x09 /* B1 Error Count Register */
-#define uPD98402_B2ECT 0x0a /* B2 Error Count Register */
-#define uPD98402_B3ECT 0x0b /* B3 Error Count Regster */
-#define uPD98402_PFECB 0x0c /* Path FEBE Count Register */
-#define uPD98402_LECCT 0x0d /* Line FEBE Count Register */
-#define uPD98402_HECCT 0x0e /* HEC Error Count Register */
-#define uPD98402_FJCT 0x0f /* Frequence Justification Count Reg */
-#define uPD98402_PCOCR 0x10 /* Perf. Counter Overflow Cause Reg */
-#define uPD98402_PCOMR 0x11 /* Perf. Counter Overflow Mask Reg */
-#define uPD98402_C11T 0x20 /* C11T Data Register */
-#define uPD98402_C12T 0x21 /* C12T Data Register */
-#define uPD98402_C13T 0x22 /* C13T Data Register */
-#define uPD98402_F1T 0x23 /* F1T Data Register */
-#define uPD98402_K2T 0x25 /* K2T Data Register */
-#define uPD98402_C2T 0x26 /* C2T Data Register */
-#define uPD98402_F2T 0x27 /* F2T Data Register */
-#define uPD98402_C11R 0x30 /* C11T Data Register */
-#define uPD98402_C12R 0x31 /* C12T Data Register */
-#define uPD98402_C13R 0x32 /* C13T Data Register */
-#define uPD98402_F1R 0x33 /* F1T Data Register */
-#define uPD98402_K2R 0x35 /* K2T Data Register */
-#define uPD98402_C2R 0x36 /* C2T Data Register */
-#define uPD98402_F2R 0x37 /* F2T Data Register */
-
-/* CMR is at 0x00 */
-#define uPD98402_CMR_PFRF 0x01 /* Send path FERF */
-#define uPD98402_CMR_LFRF 0x02 /* Send line FERF */
-#define uPD98402_CMR_PAIS 0x04 /* Send path AIS */
-#define uPD98402_CMR_LAIS 0x08 /* Send line AIS */
-
-/* MDR is at 0x01 */
-#define uPD98402_MDR_ALP 0x01 /* ATM layer loopback */
-#define uPD98402_MDR_TPLP 0x02 /* PMD loopback, to host */
-#define uPD98402_MDR_RPLP 0x04 /* PMD loopback, to network */
-#define uPD98402_MDR_SS0 0x08 /* SS0 */
-#define uPD98402_MDR_SS1 0x10 /* SS1 */
-#define uPD98402_MDR_SS_MASK 0x18 /* mask */
-#define uPD98402_MDR_SS_SHIFT 3 /* shift */
-#define uPD98402_MDR_HEC 0x20 /* disable HEC inbound processing */
-#define uPD98402_MDR_FSR 0x40 /* disable frame scrambler */
-#define uPD98402_MDR_CSR 0x80 /* disable cell scrambler */
-
-/* PICR is at 0x02, PIMR is at 0x03 */
-#define uPD98402_INT_PFM 0x01 /* performance counter has changed */
-#define uPD98402_INT_ALM 0x02 /* line fault */
-#define uPD98402_INT_RFO 0x04 /* receive FIFO overflow */
-#define uPD98402_INT_PCO 0x08 /* performance counter overflow */
-#define uPD98402_INT_OTD 0x20 /* OTD has occurred */
-#define uPD98402_INT_LOS 0x40 /* Loss Of Signal */
-#define uPD98402_INT_LOF 0x80 /* Loss Of Frame */
-
-/* ACR is as 0x04, ACMR is at 0x05 */
-#define uPD98402_ALM_PFRF 0x01 /* path FERF */
-#define uPD98402_ALM_LFRF 0x02 /* line FERF */
-#define uPD98402_ALM_PAIS 0x04 /* path AIS */
-#define uPD98402_ALM_LAIS 0x08 /* line AIS */
-#define uPD98402_ALM_LOD 0x10 /* loss of delineation */
-#define uPD98402_ALM_LOP 0x20 /* loss of pointer */
-#define uPD98402_ALM_OOF 0x40 /* out of frame */
-
-/* PCR is at 0x06, PCMR is at 0x07 */
-#define uPD98402_PFM_PFEB 0x01 /* path FEBE */
-#define uPD98402_PFM_LFEB 0x02 /* line FEBE */
-#define uPD98402_PFM_B3E 0x04 /* B3 error */
-#define uPD98402_PFM_B2E 0x08 /* B2 error */
-#define uPD98402_PFM_B1E 0x10 /* B1 error */
-#define uPD98402_PFM_FJ 0x20 /* frequency justification */
-
-/* IACM is at 0x08 */
-#define uPD98402_IACM_PFRF 0x01 /* don't generate path FERF */
-#define uPD98402_IACM_LFRF 0x02 /* don't generate line FERF */
-
-/* PCOCR is at 0x010, PCOMR is at 0x11 */
-#define uPD98402_PCO_B1EC 0x01 /* B1ECT overflow */
-#define uPD98402_PCO_B2EC 0x02 /* B2ECT overflow */
-#define uPD98402_PCO_B3EC 0x04 /* B3ECT overflow */
-#define uPD98402_PCO_PFBC 0x08 /* PFEBC overflow */
-#define uPD98402_PCO_LFBC 0x10 /* LFEVC overflow */
-#define uPD98402_PCO_HECC 0x20 /* HECCT overflow */
-#define uPD98402_PCO_FJC 0x40 /* FJCT overflow */
-
-
-int uPD98402_init(struct atm_dev *dev);
-
-#endif
diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c
deleted file mode 100644
index cf5fffcf98a1..000000000000
--- a/drivers/atm/zatm.c
+++ /dev/null
@@ -1,1652 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/* drivers/atm/zatm.c - ZeitNet ZN122x device driver */
-
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
-
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/errno.h>
-#include <linux/atm.h>
-#include <linux/atmdev.h>
-#include <linux/sonet.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/delay.h>
-#include <linux/uio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/atm_zatm.h>
-#include <linux/capability.h>
-#include <linux/bitops.h>
-#include <linux/wait.h>
-#include <linux/slab.h>
-#include <asm/byteorder.h>
-#include <asm/string.h>
-#include <asm/io.h>
-#include <linux/atomic.h>
-#include <linux/uaccess.h>
-#include <linux/nospec.h>
-
-#include "uPD98401.h"
-#include "uPD98402.h"
-#include "zeprom.h"
-#include "zatm.h"
-
-
-/*
- * TODO:
- *
- * Minor features
- * - support 64 kB SDUs (will have to use multibuffer batches then :-( )
- * - proper use of CDV, credit = max(1,CDVT*PCR)
- * - AAL0
- * - better receive timestamps
- * - OAM
- */
-
-#define ZATM_COPPER 1
-
-#if 0
-#define DPRINTK(format,args...) printk(KERN_DEBUG format,##args)
-#else
-#define DPRINTK(format,args...)
-#endif
-
-#ifndef CONFIG_ATM_ZATM_DEBUG
-
-
-#define NULLCHECK(x)
-
-#define EVENT(s,a,b)
-
-
-static void event_dump(void)
-{
-}
-
-
-#else
-
-
-/*
- * NULL pointer checking
- */
-
-#define NULLCHECK(x) \
- if ((unsigned long) (x) < 0x30) printk(KERN_CRIT #x "==0x%x\n", (int) (x))
-
-/*
- * Very extensive activity logging. Greatly improves bug detection speed but
- * costs a few Mbps if enabled.
- */
-
-#define EV 64
-
-static const char *ev[EV];
-static unsigned long ev_a[EV],ev_b[EV];
-static int ec = 0;
-
-
-static void EVENT(const char *s,unsigned long a,unsigned long b)
-{
- ev[ec] = s;
- ev_a[ec] = a;
- ev_b[ec] = b;
- ec = (ec+1) % EV;
-}
-
-
-static void event_dump(void)
-{
- int n,i;
-
- printk(KERN_NOTICE "----- event dump follows -----\n");
- for (n = 0; n < EV; n++) {
- i = (ec+n) % EV;
- printk(KERN_NOTICE);
- printk(ev[i] ? ev[i] : "(null)",ev_a[i],ev_b[i]);
- }
- printk(KERN_NOTICE "----- event dump ends here -----\n");
-}
-
-
-#endif /* CONFIG_ATM_ZATM_DEBUG */
-
-
-#define RING_BUSY 1 /* indication from do_tx that PDU has to be
- backlogged */
-
-static struct atm_dev *zatm_boards = NULL;
-static unsigned long dummy[2] = {0,0};
-
-
-#define zin_n(r) inl(zatm_dev->base+r*4)
-#define zin(r) inl(zatm_dev->base+uPD98401_##r*4)
-#define zout(v,r) outl(v,zatm_dev->base+uPD98401_##r*4)
-#define zwait() do {} while (zin(CMR) & uPD98401_BUSY)
-
-/* RX0, RX1, TX0, TX1 */
-static const int mbx_entries[NR_MBX] = { 1024,1024,1024,1024 };
-static const int mbx_esize[NR_MBX] = { 16,16,4,4 }; /* entry size in bytes */
-
-#define MBX_SIZE(i) (mbx_entries[i]*mbx_esize[i])
-
-
-/*-------------------------------- utilities --------------------------------*/
-
-
-static void zpokel(struct zatm_dev *zatm_dev,u32 value,u32 addr)
-{
- zwait();
- zout(value,CER);
- zout(uPD98401_IND_ACC | uPD98401_IA_BALL |
- (uPD98401_IA_TGT_CM << uPD98401_IA_TGT_SHIFT) | addr,CMR);
-}
-
-
-static u32 zpeekl(struct zatm_dev *zatm_dev,u32 addr)
-{
- zwait();
- zout(uPD98401_IND_ACC | uPD98401_IA_BALL | uPD98401_IA_RW |
- (uPD98401_IA_TGT_CM << uPD98401_IA_TGT_SHIFT) | addr,CMR);
- zwait();
- return zin(CER);
-}
-
-
-/*------------------------------- free lists --------------------------------*/
-
-
-/*
- * Free buffer head structure:
- * [0] pointer to buffer (for SAR)
- * [1] buffer descr link pointer (for SAR)
- * [2] back pointer to skb (for poll_rx)
- * [3] data
- * ...
- */
-
-struct rx_buffer_head {
- u32 buffer; /* pointer to buffer (for SAR) */
- u32 link; /* buffer descriptor link pointer (for SAR) */
- struct sk_buff *skb; /* back pointer to skb (for poll_rx) */
-};
-
-
-static void refill_pool(struct atm_dev *dev,int pool)
-{
- struct zatm_dev *zatm_dev;
- struct sk_buff *skb;
- struct rx_buffer_head *first;
- unsigned long flags;
- int align,offset,free,count,size;
-
- EVENT("refill_pool\n",0,0);
- zatm_dev = ZATM_DEV(dev);
- size = (64 << (pool <= ZATM_AAL5_POOL_BASE ? 0 :
- pool-ZATM_AAL5_POOL_BASE))+sizeof(struct rx_buffer_head);
- if (size < PAGE_SIZE) {
- align = 32; /* for 32 byte alignment */
- offset = sizeof(struct rx_buffer_head);
- }
- else {
- align = 4096;
- offset = zatm_dev->pool_info[pool].offset+
- sizeof(struct rx_buffer_head);
- }
- size += align;
- spin_lock_irqsave(&zatm_dev->lock, flags);
- free = zpeekl(zatm_dev,zatm_dev->pool_base+2*pool) &
- uPD98401_RXFP_REMAIN;
- spin_unlock_irqrestore(&zatm_dev->lock, flags);
- if (free >= zatm_dev->pool_info[pool].low_water) return;
- EVENT("starting ... POOL: 0x%x, 0x%x\n",
- zpeekl(zatm_dev,zatm_dev->pool_base+2*pool),
- zpeekl(zatm_dev,zatm_dev->pool_base+2*pool+1));
- EVENT("dummy: 0x%08lx, 0x%08lx\n",dummy[0],dummy[1]);
- count = 0;
- first = NULL;
- while (free < zatm_dev->pool_info[pool].high_water) {
- struct rx_buffer_head *head;
-
- skb = alloc_skb(size,GFP_ATOMIC);
- if (!skb) {
- printk(KERN_WARNING DEV_LABEL "(Itf %d): got no new "
- "skb (%d) with %d free\n",dev->number,size,free);
- break;
- }
- skb_reserve(skb,(unsigned char *) ((((unsigned long) skb->data+
- align+offset-1) & ~(unsigned long) (align-1))-offset)-
- skb->data);
- head = (struct rx_buffer_head *) skb->data;
- skb_reserve(skb,sizeof(struct rx_buffer_head));
- if (!first) first = head;
- count++;
- head->buffer = virt_to_bus(skb->data);
- head->link = 0;
- head->skb = skb;
- EVENT("enq skb 0x%08lx/0x%08lx\n",(unsigned long) skb,
- (unsigned long) head);
- spin_lock_irqsave(&zatm_dev->lock, flags);
- if (zatm_dev->last_free[pool])
- ((struct rx_buffer_head *) (zatm_dev->last_free[pool]->
- data))[-1].link = virt_to_bus(head);
- zatm_dev->last_free[pool] = skb;
- skb_queue_tail(&zatm_dev->pool[pool],skb);
- spin_unlock_irqrestore(&zatm_dev->lock, flags);
- free++;
- }
- if (first) {
- spin_lock_irqsave(&zatm_dev->lock, flags);
- zwait();
- zout(virt_to_bus(first),CER);
- zout(uPD98401_ADD_BAT | (pool << uPD98401_POOL_SHIFT) | count,
- CMR);
- spin_unlock_irqrestore(&zatm_dev->lock, flags);
- EVENT ("POOL: 0x%x, 0x%x\n",
- zpeekl(zatm_dev,zatm_dev->pool_base+2*pool),
- zpeekl(zatm_dev,zatm_dev->pool_base+2*pool+1));
- EVENT("dummy: 0x%08lx, 0x%08lx\n",dummy[0],dummy[1]);
- }
-}
-
-
-static void drain_free(struct atm_dev *dev,int pool)
-{
- skb_queue_purge(&ZATM_DEV(dev)->pool[pool]);
-}
-
-
-static int pool_index(int max_pdu)
-{
- int i;
-
- if (max_pdu % ATM_CELL_PAYLOAD)
- printk(KERN_ERR DEV_LABEL ": driver error in pool_index: "
- "max_pdu is %d\n",max_pdu);
- if (max_pdu > 65536) return -1;
- for (i = 0; (64 << i) < max_pdu; i++);
- return i+ZATM_AAL5_POOL_BASE;
-}
-
-
-/* use_pool isn't reentrant */
-
-
-static void use_pool(struct atm_dev *dev,int pool)
-{
- struct zatm_dev *zatm_dev;
- unsigned long flags;
- int size;
-
- zatm_dev = ZATM_DEV(dev);
- if (!(zatm_dev->pool_info[pool].ref_count++)) {
- skb_queue_head_init(&zatm_dev->pool[pool]);
- size = pool-ZATM_AAL5_POOL_BASE;
- if (size < 0) size = 0; /* 64B... */
- else if (size > 10) size = 10; /* ... 64kB */
- spin_lock_irqsave(&zatm_dev->lock, flags);
- zpokel(zatm_dev,((zatm_dev->pool_info[pool].low_water/4) <<
- uPD98401_RXFP_ALERT_SHIFT) |
- (1 << uPD98401_RXFP_BTSZ_SHIFT) |
- (size << uPD98401_RXFP_BFSZ_SHIFT),
- zatm_dev->pool_base+pool*2);
- zpokel(zatm_dev,(unsigned long) dummy,zatm_dev->pool_base+
- pool*2+1);
- spin_unlock_irqrestore(&zatm_dev->lock, flags);
- zatm_dev->last_free[pool] = NULL;
- refill_pool(dev,pool);
- }
- DPRINTK("pool %d: %d\n",pool,zatm_dev->pool_info[pool].ref_count);
-}
-
-
-static void unuse_pool(struct atm_dev *dev,int pool)
-{
- if (!(--ZATM_DEV(dev)->pool_info[pool].ref_count))
- drain_free(dev,pool);
-}
-
-/*----------------------------------- RX ------------------------------------*/
-
-
-#if 0
-static void exception(struct atm_vcc *vcc)
-{
- static int count = 0;
- struct zatm_dev *zatm_dev = ZATM_DEV(vcc->dev);
- struct zatm_vcc *zatm_vcc = ZATM_VCC(vcc);
- unsigned long *qrp;
- int i;
-
- if (count++ > 2) return;
- for (i = 0; i < 8; i++)
- printk("TX%d: 0x%08lx\n",i,
- zpeekl(zatm_dev,zatm_vcc->tx_chan*VC_SIZE/4+i));
- for (i = 0; i < 5; i++)
- printk("SH%d: 0x%08lx\n",i,
- zpeekl(zatm_dev,uPD98401_IM(zatm_vcc->shaper)+16*i));
- qrp = (unsigned long *) zpeekl(zatm_dev,zatm_vcc->tx_chan*VC_SIZE/4+
- uPD98401_TXVC_QRP);
- printk("qrp=0x%08lx\n",(unsigned long) qrp);
- for (i = 0; i < 4; i++) printk("QRP[%d]: 0x%08lx",i,qrp[i]);
-}
-#endif
-
-
-static const char *err_txt[] = {
- "No error",
- "RX buf underflow",
- "RX FIFO overrun",
- "Maximum len violation",
- "CRC error",
- "User abort",
- "Length violation",
- "T1 error",
- "Deactivated",
- "???",
- "???",
- "???",
- "???",
- "???",
- "???",
- "???"
-};
-
-
-static void poll_rx(struct atm_dev *dev,int mbx)
-{
- struct zatm_dev *zatm_dev;
- unsigned long pos;
- u32 x;
- int error;
-
- EVENT("poll_rx\n",0,0);
- zatm_dev = ZATM_DEV(dev);
- pos = (zatm_dev->mbx_start[mbx] & ~0xffffUL) | zin(MTA(mbx));
- while (x = zin(MWA(mbx)), (pos & 0xffff) != x) {
- u32 *here;
- struct sk_buff *skb;
- struct atm_vcc *vcc;
- int cells,size,chan;
-
- EVENT("MBX: host 0x%lx, nic 0x%x\n",pos,x);
- here = (u32 *) pos;
- if (((pos += 16) & 0xffff) == zatm_dev->mbx_end[mbx])
- pos = zatm_dev->mbx_start[mbx];
- cells = here[0] & uPD98401_AAL5_SIZE;
-#if 0
-printk("RX IND: 0x%x, 0x%x, 0x%x, 0x%x\n",here[0],here[1],here[2],here[3]);
-{
-unsigned long *x;
- printk("POOL: 0x%08x, 0x%08x\n",zpeekl(zatm_dev,
- zatm_dev->pool_base),
- zpeekl(zatm_dev,zatm_dev->pool_base+1));
- x = (unsigned long *) here[2];
- printk("[0..3] = 0x%08lx, 0x%08lx, 0x%08lx, 0x%08lx\n",
- x[0],x[1],x[2],x[3]);
-}
-#endif
- error = 0;
- if (here[3] & uPD98401_AAL5_ERR) {
- error = (here[3] & uPD98401_AAL5_ES) >>
- uPD98401_AAL5_ES_SHIFT;
- if (error == uPD98401_AAL5_ES_DEACT ||
- error == uPD98401_AAL5_ES_FREE) continue;
- }
-EVENT("error code 0x%x/0x%x\n",(here[3] & uPD98401_AAL5_ES) >>
- uPD98401_AAL5_ES_SHIFT,error);
- skb = ((struct rx_buffer_head *) bus_to_virt(here[2]))->skb;
- __net_timestamp(skb);
-#if 0
-printk("[-3..0] 0x%08lx 0x%08lx 0x%08lx 0x%08lx\n",((unsigned *) skb->data)[-3],
- ((unsigned *) skb->data)[-2],((unsigned *) skb->data)[-1],
- ((unsigned *) skb->data)[0]);
-#endif
- EVENT("skb 0x%lx, here 0x%lx\n",(unsigned long) skb,
- (unsigned long) here);
-#if 0
-printk("dummy: 0x%08lx, 0x%08lx\n",dummy[0],dummy[1]);
-#endif
- size = error ? 0 : ntohs(((__be16 *) skb->data)[cells*
- ATM_CELL_PAYLOAD/sizeof(u16)-3]);
- EVENT("got skb 0x%lx, size %d\n",(unsigned long) skb,size);
- chan = (here[3] & uPD98401_AAL5_CHAN) >>
- uPD98401_AAL5_CHAN_SHIFT;
- if (chan < zatm_dev->chans && zatm_dev->rx_map[chan]) {
- int pos;
- vcc = zatm_dev->rx_map[chan];
- pos = ZATM_VCC(vcc)->pool;
- if (skb == zatm_dev->last_free[pos])
- zatm_dev->last_free[pos] = NULL;
- skb_unlink(skb, zatm_dev->pool + pos);
- }
- else {
- printk(KERN_ERR DEV_LABEL "(itf %d): RX indication "
- "for non-existing channel\n",dev->number);
- size = 0;
- vcc = NULL;
- event_dump();
- }
- if (error) {
- static unsigned long silence = 0;
- static int last_error = 0;
-
- if (error != last_error ||
- time_after(jiffies, silence) || silence == 0){
- printk(KERN_WARNING DEV_LABEL "(itf %d): "
- "chan %d error %s\n",dev->number,chan,
- err_txt[error]);
- last_error = error;
- silence = (jiffies+2*HZ)|1;
- }
- size = 0;
- }
- if (size && (size > cells*ATM_CELL_PAYLOAD-ATM_AAL5_TRAILER ||
- size <= (cells-1)*ATM_CELL_PAYLOAD-ATM_AAL5_TRAILER)) {
- printk(KERN_ERR DEV_LABEL "(itf %d): size %d with %d "
- "cells\n",dev->number,size,cells);
- size = 0;
- event_dump();
- }
- if (size > ATM_MAX_AAL5_PDU) {
- printk(KERN_ERR DEV_LABEL "(itf %d): size too big "
- "(%d)\n",dev->number,size);
- size = 0;
- event_dump();
- }
- if (!size) {
- dev_kfree_skb_irq(skb);
- if (vcc) atomic_inc(&vcc->stats->rx_err);
- continue;
- }
- if (!atm_charge(vcc,skb->truesize)) {
- dev_kfree_skb_irq(skb);
- continue;
- }
- skb->len = size;
- ATM_SKB(skb)->vcc = vcc;
- vcc->push(vcc,skb);
- atomic_inc(&vcc->stats->rx);
- }
- zout(pos & 0xffff,MTA(mbx));
-#if 0 /* probably a stupid idea */
- refill_pool(dev,zatm_vcc->pool);
- /* maybe this saves us a few interrupts */
-#endif
-}
-
-
-static int open_rx_first(struct atm_vcc *vcc)
-{
- struct zatm_dev *zatm_dev;
- struct zatm_vcc *zatm_vcc;
- unsigned long flags;
- unsigned short chan;
- int cells;
-
- DPRINTK("open_rx_first (0x%x)\n",inb_p(0xc053));
- zatm_dev = ZATM_DEV(vcc->dev);
- zatm_vcc = ZATM_VCC(vcc);
- zatm_vcc->rx_chan = 0;
- if (vcc->qos.rxtp.traffic_class == ATM_NONE) return 0;
- if (vcc->qos.aal == ATM_AAL5) {
- if (vcc->qos.rxtp.max_sdu > 65464)
- vcc->qos.rxtp.max_sdu = 65464;
- /* fix this - we may want to receive 64kB SDUs
- later */
- cells = DIV_ROUND_UP(vcc->qos.rxtp.max_sdu + ATM_AAL5_TRAILER,
- ATM_CELL_PAYLOAD);
- zatm_vcc->pool = pool_index(cells*ATM_CELL_PAYLOAD);
- }
- else {
- cells = 1;
- zatm_vcc->pool = ZATM_AAL0_POOL;
- }
- if (zatm_vcc->pool < 0) return -EMSGSIZE;
- spin_lock_irqsave(&zatm_dev->lock, flags);
- zwait();
- zout(uPD98401_OPEN_CHAN,CMR);
- zwait();
- DPRINTK("0x%x 0x%x\n",zin(CMR),zin(CER));
- chan = (zin(CMR) & uPD98401_CHAN_ADDR) >> uPD98401_CHAN_ADDR_SHIFT;
- spin_unlock_irqrestore(&zatm_dev->lock, flags);
- DPRINTK("chan is %d\n",chan);
- if (!chan) return -EAGAIN;
- use_pool(vcc->dev,zatm_vcc->pool);
- DPRINTK("pool %d\n",zatm_vcc->pool);
- /* set up VC descriptor */
- spin_lock_irqsave(&zatm_dev->lock, flags);
- zpokel(zatm_dev,zatm_vcc->pool << uPD98401_RXVC_POOL_SHIFT,
- chan*VC_SIZE/4);
- zpokel(zatm_dev,uPD98401_RXVC_OD | (vcc->qos.aal == ATM_AAL5 ?
- uPD98401_RXVC_AR : 0) | cells,chan*VC_SIZE/4+1);
- zpokel(zatm_dev,0,chan*VC_SIZE/4+2);
- zatm_vcc->rx_chan = chan;
- zatm_dev->rx_map[chan] = vcc;
- spin_unlock_irqrestore(&zatm_dev->lock, flags);
- return 0;
-}
-
-
-static int open_rx_second(struct atm_vcc *vcc)
-{
- struct zatm_dev *zatm_dev;
- struct zatm_vcc *zatm_vcc;
- unsigned long flags;
- int pos,shift;
-
- DPRINTK("open_rx_second (0x%x)\n",inb_p(0xc053));
- zatm_dev = ZATM_DEV(vcc->dev);
- zatm_vcc = ZATM_VCC(vcc);
- if (!zatm_vcc->rx_chan) return 0;
- spin_lock_irqsave(&zatm_dev->lock, flags);
- /* should also handle VPI @@@ */
- pos = vcc->vci >> 1;
- shift = (1-(vcc->vci & 1)) << 4;
- zpokel(zatm_dev,(zpeekl(zatm_dev,pos) & ~(0xffff << shift)) |
- ((zatm_vcc->rx_chan | uPD98401_RXLT_ENBL) << shift),pos);
- spin_unlock_irqrestore(&zatm_dev->lock, flags);
- return 0;
-}
-
-
-static void close_rx(struct atm_vcc *vcc)
-{
- struct zatm_dev *zatm_dev;
- struct zatm_vcc *zatm_vcc;
- unsigned long flags;
- int pos,shift;
-
- zatm_vcc = ZATM_VCC(vcc);
- zatm_dev = ZATM_DEV(vcc->dev);
- if (!zatm_vcc->rx_chan) return;
- DPRINTK("close_rx\n");
- /* disable receiver */
- if (vcc->vpi != ATM_VPI_UNSPEC && vcc->vci != ATM_VCI_UNSPEC) {
- spin_lock_irqsave(&zatm_dev->lock, flags);
- pos = vcc->vci >> 1;
- shift = (1-(vcc->vci & 1)) << 4;
- zpokel(zatm_dev,zpeekl(zatm_dev,pos) & ~(0xffff << shift),pos);
- zwait();
- zout(uPD98401_NOP,CMR);
- zwait();
- zout(uPD98401_NOP,CMR);
- spin_unlock_irqrestore(&zatm_dev->lock, flags);
- }
- spin_lock_irqsave(&zatm_dev->lock, flags);
- zwait();
- zout(uPD98401_DEACT_CHAN | uPD98401_CHAN_RT | (zatm_vcc->rx_chan <<
- uPD98401_CHAN_ADDR_SHIFT),CMR);
- zwait();
- udelay(10); /* why oh why ... ? */
- zout(uPD98401_CLOSE_CHAN | uPD98401_CHAN_RT | (zatm_vcc->rx_chan <<
- uPD98401_CHAN_ADDR_SHIFT),CMR);
- zwait();
- if (!(zin(CMR) & uPD98401_CHAN_ADDR))
- printk(KERN_CRIT DEV_LABEL "(itf %d): can't close RX channel "
- "%d\n",vcc->dev->number,zatm_vcc->rx_chan);
- spin_unlock_irqrestore(&zatm_dev->lock, flags);
- zatm_dev->rx_map[zatm_vcc->rx_chan] = NULL;
- zatm_vcc->rx_chan = 0;
- unuse_pool(vcc->dev,zatm_vcc->pool);
-}
-
-
-static int start_rx(struct atm_dev *dev)
-{
- struct zatm_dev *zatm_dev;
- int i;
-
- DPRINTK("start_rx\n");
- zatm_dev = ZATM_DEV(dev);
- zatm_dev->rx_map = kcalloc(zatm_dev->chans,
- sizeof(*zatm_dev->rx_map),
- GFP_KERNEL);
- if (!zatm_dev->rx_map) return -ENOMEM;
- /* set VPI/VCI split (use all VCIs and give what's left to VPIs) */
- zpokel(zatm_dev,(1 << dev->ci_range.vci_bits)-1,uPD98401_VRR);
- /* prepare free buffer pools */
- for (i = 0; i <= ZATM_LAST_POOL; i++) {
- zatm_dev->pool_info[i].ref_count = 0;
- zatm_dev->pool_info[i].rqa_count = 0;
- zatm_dev->pool_info[i].rqu_count = 0;
- zatm_dev->pool_info[i].low_water = LOW_MARK;
- zatm_dev->pool_info[i].high_water = HIGH_MARK;
- zatm_dev->pool_info[i].offset = 0;
- zatm_dev->pool_info[i].next_off = 0;
- zatm_dev->pool_info[i].next_cnt = 0;
- zatm_dev->pool_info[i].next_thres = OFF_CNG_THRES;
- }
- return 0;
-}
-
-
-/*----------------------------------- TX ------------------------------------*/
-
-
-static int do_tx(struct sk_buff *skb)
-{
- struct atm_vcc *vcc;
- struct zatm_dev *zatm_dev;
- struct zatm_vcc *zatm_vcc;
- u32 *dsc;
- unsigned long flags;
-
- EVENT("do_tx\n",0,0);
- DPRINTK("sending skb %p\n",skb);
- vcc = ATM_SKB(skb)->vcc;
- zatm_dev = ZATM_DEV(vcc->dev);
- zatm_vcc = ZATM_VCC(vcc);
- EVENT("iovcnt=%d\n",skb_shinfo(skb)->nr_frags,0);
- spin_lock_irqsave(&zatm_dev->lock, flags);
- if (!skb_shinfo(skb)->nr_frags) {
- if (zatm_vcc->txing == RING_ENTRIES-1) {
- spin_unlock_irqrestore(&zatm_dev->lock, flags);
- return RING_BUSY;
- }
- zatm_vcc->txing++;
- dsc = zatm_vcc->ring+zatm_vcc->ring_curr;
- zatm_vcc->ring_curr = (zatm_vcc->ring_curr+RING_WORDS) &
- (RING_ENTRIES*RING_WORDS-1);
- dsc[1] = 0;
- dsc[2] = skb->len;
- dsc[3] = virt_to_bus(skb->data);
- mb();
- dsc[0] = uPD98401_TXPD_V | uPD98401_TXPD_DP | uPD98401_TXPD_SM
- | (vcc->qos.aal == ATM_AAL5 ? uPD98401_TXPD_AAL5 : 0 |
- (ATM_SKB(skb)->atm_options & ATM_ATMOPT_CLP ?
- uPD98401_CLPM_1 : uPD98401_CLPM_0));
- EVENT("dsc (0x%lx)\n",(unsigned long) dsc,0);
- }
- else {
-printk("NONONONOO!!!!\n");
- dsc = NULL;
-#if 0
- u32 *put;
- int i;
-
- dsc = kmalloc(uPD98401_TXPD_SIZE * 2 +
- uPD98401_TXBD_SIZE * ATM_SKB(skb)->iovcnt, GFP_ATOMIC);
- if (!dsc) {
- if (vcc->pop)
- vcc->pop(vcc, skb);
- else
- dev_kfree_skb_irq(skb);
- return -EAGAIN;
- }
- /* @@@ should check alignment */
- put = dsc+8;
- dsc[0] = uPD98401_TXPD_V | uPD98401_TXPD_DP |
- (vcc->aal == ATM_AAL5 ? uPD98401_TXPD_AAL5 : 0 |
- (ATM_SKB(skb)->atm_options & ATM_ATMOPT_CLP ?
- uPD98401_CLPM_1 : uPD98401_CLPM_0));
- dsc[1] = 0;
- dsc[2] = ATM_SKB(skb)->iovcnt * uPD98401_TXBD_SIZE;
- dsc[3] = virt_to_bus(put);
- for (i = 0; i < ATM_SKB(skb)->iovcnt; i++) {
- *put++ = ((struct iovec *) skb->data)[i].iov_len;
- *put++ = virt_to_bus(((struct iovec *)
- skb->data)[i].iov_base);
- }
- put[-2] |= uPD98401_TXBD_LAST;
-#endif
- }
- ZATM_PRV_DSC(skb) = dsc;
- skb_queue_tail(&zatm_vcc->tx_queue,skb);
- DPRINTK("QRP=0x%08lx\n",zpeekl(zatm_dev,zatm_vcc->tx_chan*VC_SIZE/4+
- uPD98401_TXVC_QRP));
- zwait();
- zout(uPD98401_TX_READY | (zatm_vcc->tx_chan <<
- uPD98401_CHAN_ADDR_SHIFT),CMR);
- spin_unlock_irqrestore(&zatm_dev->lock, flags);
- EVENT("done\n",0,0);
- return 0;
-}
-
-
-static inline void dequeue_tx(struct atm_vcc *vcc)
-{
- struct zatm_vcc *zatm_vcc;
- struct sk_buff *skb;
-
- EVENT("dequeue_tx\n",0,0);
- zatm_vcc = ZATM_VCC(vcc);
- skb = skb_dequeue(&zatm_vcc->tx_queue);
- if (!skb) {
- printk(KERN_CRIT DEV_LABEL "(itf %d): dequeue_tx but not "
- "txing\n",vcc->dev->number);
- return;
- }
-#if 0 /* @@@ would fail on CLP */
-if (*ZATM_PRV_DSC(skb) != (uPD98401_TXPD_V | uPD98401_TXPD_DP |
- uPD98401_TXPD_SM | uPD98401_TXPD_AAL5)) printk("@#*$!!!! (%08x)\n",
- *ZATM_PRV_DSC(skb));
-#endif
- *ZATM_PRV_DSC(skb) = 0; /* mark as invalid */
- zatm_vcc->txing--;
- if (vcc->pop) vcc->pop(vcc,skb);
- else dev_kfree_skb_irq(skb);
- while ((skb = skb_dequeue(&zatm_vcc->backlog)))
- if (do_tx(skb) == RING_BUSY) {
- skb_queue_head(&zatm_vcc->backlog,skb);
- break;
- }
- atomic_inc(&vcc->stats->tx);
- wake_up(&zatm_vcc->tx_wait);
-}
-
-
-static void poll_tx(struct atm_dev *dev,int mbx)
-{
- struct zatm_dev *zatm_dev;
- unsigned long pos;
- u32 x;
-
- EVENT("poll_tx\n",0,0);
- zatm_dev = ZATM_DEV(dev);
- pos = (zatm_dev->mbx_start[mbx] & ~0xffffUL) | zin(MTA(mbx));
- while (x = zin(MWA(mbx)), (pos & 0xffff) != x) {
- int chan;
-
-#if 1
- u32 data,*addr;
-
- EVENT("MBX: host 0x%lx, nic 0x%x\n",pos,x);
- addr = (u32 *) pos;
- data = *addr;
- chan = (data & uPD98401_TXI_CONN) >> uPD98401_TXI_CONN_SHIFT;
- EVENT("addr = 0x%lx, data = 0x%08x,",(unsigned long) addr,
- data);
- EVENT("chan = %d\n",chan,0);
-#else
-NO !
- chan = (zatm_dev->mbx_start[mbx][pos >> 2] & uPD98401_TXI_CONN)
- >> uPD98401_TXI_CONN_SHIFT;
-#endif
- if (chan < zatm_dev->chans && zatm_dev->tx_map[chan])
- dequeue_tx(zatm_dev->tx_map[chan]);
- else {
- printk(KERN_CRIT DEV_LABEL "(itf %d): TX indication "
- "for non-existing channel %d\n",dev->number,chan);
- event_dump();
- }
- if (((pos += 4) & 0xffff) == zatm_dev->mbx_end[mbx])
- pos = zatm_dev->mbx_start[mbx];
- }
- zout(pos & 0xffff,MTA(mbx));
-}
-
-
-/*
- * BUG BUG BUG: Doesn't handle "new-style" rate specification yet.
- */
-
-static int alloc_shaper(struct atm_dev *dev,int *pcr,int min,int max,int ubr)
-{
- struct zatm_dev *zatm_dev;
- unsigned long flags;
- unsigned long i,m,c;
- int shaper;
-
- DPRINTK("alloc_shaper (min = %d, max = %d)\n",min,max);
- zatm_dev = ZATM_DEV(dev);
- if (!zatm_dev->free_shapers) return -EAGAIN;
- for (shaper = 0; !((zatm_dev->free_shapers >> shaper) & 1); shaper++);
- zatm_dev->free_shapers &= ~1 << shaper;
- if (ubr) {
- c = 5;
- i = m = 1;
- zatm_dev->ubr_ref_cnt++;
- zatm_dev->ubr = shaper;
- *pcr = 0;
- }
- else {
- if (min) {
- if (min <= 255) {
- i = min;
- m = ATM_OC3_PCR;
- }
- else {
- i = 255;
- m = ATM_OC3_PCR*255/min;
- }
- }
- else {
- if (max > zatm_dev->tx_bw) max = zatm_dev->tx_bw;
- if (max <= 255) {
- i = max;
- m = ATM_OC3_PCR;
- }
- else {
- i = 255;
- m = DIV_ROUND_UP(ATM_OC3_PCR*255, max);
- }
- }
- if (i > m) {
- printk(KERN_CRIT DEV_LABEL "shaper algorithm botched "
- "[%d,%d] -> i=%ld,m=%ld\n",min,max,i,m);
- m = i;
- }
- *pcr = i*ATM_OC3_PCR/m;
- c = 20; /* @@@ should use max_cdv ! */
- if ((min && *pcr < min) || (max && *pcr > max)) return -EINVAL;
- if (zatm_dev->tx_bw < *pcr) return -EAGAIN;
- zatm_dev->tx_bw -= *pcr;
- }
- spin_lock_irqsave(&zatm_dev->lock, flags);
- DPRINTK("i = %d, m = %d, PCR = %d\n",i,m,*pcr);
- zpokel(zatm_dev,(i << uPD98401_IM_I_SHIFT) | m,uPD98401_IM(shaper));
- zpokel(zatm_dev,c << uPD98401_PC_C_SHIFT,uPD98401_PC(shaper));
- zpokel(zatm_dev,0,uPD98401_X(shaper));
- zpokel(zatm_dev,0,uPD98401_Y(shaper));
- zpokel(zatm_dev,uPD98401_PS_E,uPD98401_PS(shaper));
- spin_unlock_irqrestore(&zatm_dev->lock, flags);
- return shaper;
-}
-
-
-static void dealloc_shaper(struct atm_dev *dev,int shaper)
-{
- struct zatm_dev *zatm_dev;
- unsigned long flags;
-
- zatm_dev = ZATM_DEV(dev);
- if (shaper == zatm_dev->ubr) {
- if (--zatm_dev->ubr_ref_cnt) return;
- zatm_dev->ubr = -1;
- }
- spin_lock_irqsave(&zatm_dev->lock, flags);
- zpokel(zatm_dev,zpeekl(zatm_dev,uPD98401_PS(shaper)) & ~uPD98401_PS_E,
- uPD98401_PS(shaper));
- spin_unlock_irqrestore(&zatm_dev->lock, flags);
- zatm_dev->free_shapers |= 1 << shaper;
-}
-
-
-static void close_tx(struct atm_vcc *vcc)
-{
- struct zatm_dev *zatm_dev;
- struct zatm_vcc *zatm_vcc;
- unsigned long flags;
- int chan;
-
- zatm_vcc = ZATM_VCC(vcc);
- zatm_dev = ZATM_DEV(vcc->dev);
- chan = zatm_vcc->tx_chan;
- if (!chan) return;
- DPRINTK("close_tx\n");
- if (skb_peek(&zatm_vcc->backlog)) {
- printk("waiting for backlog to drain ...\n");
- event_dump();
- wait_event(zatm_vcc->tx_wait, !skb_peek(&zatm_vcc->backlog));
- }
- if (skb_peek(&zatm_vcc->tx_queue)) {
- printk("waiting for TX queue to drain ...\n");
- event_dump();
- wait_event(zatm_vcc->tx_wait, !skb_peek(&zatm_vcc->tx_queue));
- }
- spin_lock_irqsave(&zatm_dev->lock, flags);
-#if 0
- zwait();
- zout(uPD98401_DEACT_CHAN | (chan << uPD98401_CHAN_ADDR_SHIFT),CMR);
-#endif
- zwait();
- zout(uPD98401_CLOSE_CHAN | (chan << uPD98401_CHAN_ADDR_SHIFT),CMR);
- zwait();
- if (!(zin(CMR) & uPD98401_CHAN_ADDR))
- printk(KERN_CRIT DEV_LABEL "(itf %d): can't close TX channel "
- "%d\n",vcc->dev->number,chan);
- spin_unlock_irqrestore(&zatm_dev->lock, flags);
- zatm_vcc->tx_chan = 0;
- zatm_dev->tx_map[chan] = NULL;
- if (zatm_vcc->shaper != zatm_dev->ubr) {
- zatm_dev->tx_bw += vcc->qos.txtp.min_pcr;
- dealloc_shaper(vcc->dev,zatm_vcc->shaper);
- }
- kfree(zatm_vcc->ring);
-}
-
-
-static int open_tx_first(struct atm_vcc *vcc)
-{
- struct zatm_dev *zatm_dev;
- struct zatm_vcc *zatm_vcc;
- unsigned long flags;
- u32 *loop;
- unsigned short chan;
- int unlimited;
-
- DPRINTK("open_tx_first\n");
- zatm_dev = ZATM_DEV(vcc->dev);
- zatm_vcc = ZATM_VCC(vcc);
- zatm_vcc->tx_chan = 0;
- if (vcc->qos.txtp.traffic_class == ATM_NONE) return 0;
- spin_lock_irqsave(&zatm_dev->lock, flags);
- zwait();
- zout(uPD98401_OPEN_CHAN,CMR);
- zwait();
- DPRINTK("0x%x 0x%x\n",zin(CMR),zin(CER));
- chan = (zin(CMR) & uPD98401_CHAN_ADDR) >> uPD98401_CHAN_ADDR_SHIFT;
- spin_unlock_irqrestore(&zatm_dev->lock, flags);
- DPRINTK("chan is %d\n",chan);
- if (!chan) return -EAGAIN;
- unlimited = vcc->qos.txtp.traffic_class == ATM_UBR &&
- (!vcc->qos.txtp.max_pcr || vcc->qos.txtp.max_pcr == ATM_MAX_PCR ||
- vcc->qos.txtp.max_pcr >= ATM_OC3_PCR);
- if (unlimited && zatm_dev->ubr != -1) zatm_vcc->shaper = zatm_dev->ubr;
- else {
- int pcr;
-
- if (unlimited) vcc->qos.txtp.max_sdu = ATM_MAX_AAL5_PDU;
- if ((zatm_vcc->shaper = alloc_shaper(vcc->dev,&pcr,
- vcc->qos.txtp.min_pcr,vcc->qos.txtp.max_pcr,unlimited))
- < 0) {
- close_tx(vcc);
- return zatm_vcc->shaper;
- }
- if (pcr > ATM_OC3_PCR) pcr = ATM_OC3_PCR;
- vcc->qos.txtp.min_pcr = vcc->qos.txtp.max_pcr = pcr;
- }
- zatm_vcc->tx_chan = chan;
- skb_queue_head_init(&zatm_vcc->tx_queue);
- init_waitqueue_head(&zatm_vcc->tx_wait);
- /* initialize ring */
- zatm_vcc->ring = kzalloc(RING_SIZE,GFP_KERNEL);
- if (!zatm_vcc->ring) return -ENOMEM;
- loop = zatm_vcc->ring+RING_ENTRIES*RING_WORDS;
- loop[0] = uPD98401_TXPD_V;
- loop[1] = loop[2] = 0;
- loop[3] = virt_to_bus(zatm_vcc->ring);
- zatm_vcc->ring_curr = 0;
- zatm_vcc->txing = 0;
- skb_queue_head_init(&zatm_vcc->backlog);
- zpokel(zatm_dev,virt_to_bus(zatm_vcc->ring),
- chan*VC_SIZE/4+uPD98401_TXVC_QRP);
- return 0;
-}
-
-
-static int open_tx_second(struct atm_vcc *vcc)
-{
- struct zatm_dev *zatm_dev;
- struct zatm_vcc *zatm_vcc;
- unsigned long flags;
-
- DPRINTK("open_tx_second\n");
- zatm_dev = ZATM_DEV(vcc->dev);
- zatm_vcc = ZATM_VCC(vcc);
- if (!zatm_vcc->tx_chan) return 0;
- /* set up VC descriptor */
- spin_lock_irqsave(&zatm_dev->lock, flags);
- zpokel(zatm_dev,0,zatm_vcc->tx_chan*VC_SIZE/4);
- zpokel(zatm_dev,uPD98401_TXVC_L | (zatm_vcc->shaper <<
- uPD98401_TXVC_SHP_SHIFT) | (vcc->vpi << uPD98401_TXVC_VPI_SHIFT) |
- vcc->vci,zatm_vcc->tx_chan*VC_SIZE/4+1);
- zpokel(zatm_dev,0,zatm_vcc->tx_chan*VC_SIZE/4+2);
- spin_unlock_irqrestore(&zatm_dev->lock, flags);
- zatm_dev->tx_map[zatm_vcc->tx_chan] = vcc;
- return 0;
-}
-
-
-static int start_tx(struct atm_dev *dev)
-{
- struct zatm_dev *zatm_dev;
- int i;
-
- DPRINTK("start_tx\n");
- zatm_dev = ZATM_DEV(dev);
- zatm_dev->tx_map = kmalloc_array(zatm_dev->chans,
- sizeof(*zatm_dev->tx_map),
- GFP_KERNEL);
- if (!zatm_dev->tx_map) return -ENOMEM;
- zatm_dev->tx_bw = ATM_OC3_PCR;
- zatm_dev->free_shapers = (1 << NR_SHAPERS)-1;
- zatm_dev->ubr = -1;
- zatm_dev->ubr_ref_cnt = 0;
- /* initialize shapers */
- for (i = 0; i < NR_SHAPERS; i++) zpokel(zatm_dev,0,uPD98401_PS(i));
- return 0;
-}
-
-
-/*------------------------------- interrupts --------------------------------*/
-
-
-static irqreturn_t zatm_int(int irq,void *dev_id)
-{
- struct atm_dev *dev;
- struct zatm_dev *zatm_dev;
- u32 reason;
- int handled = 0;
-
- dev = dev_id;
- zatm_dev = ZATM_DEV(dev);
- while ((reason = zin(GSR))) {
- handled = 1;
- EVENT("reason 0x%x\n",reason,0);
- if (reason & uPD98401_INT_PI) {
- EVENT("PHY int\n",0,0);
- dev->phy->interrupt(dev);
- }
- if (reason & uPD98401_INT_RQA) {
- unsigned long pools;
- int i;
-
- pools = zin(RQA);
- EVENT("RQA (0x%08x)\n",pools,0);
- for (i = 0; pools; i++) {
- if (pools & 1) {
- refill_pool(dev,i);
- zatm_dev->pool_info[i].rqa_count++;
- }
- pools >>= 1;
- }
- }
- if (reason & uPD98401_INT_RQU) {
- unsigned long pools;
- int i;
- pools = zin(RQU);
- printk(KERN_WARNING DEV_LABEL "(itf %d): RQU 0x%08lx\n",
- dev->number,pools);
- event_dump();
- for (i = 0; pools; i++) {
- if (pools & 1) {
- refill_pool(dev,i);
- zatm_dev->pool_info[i].rqu_count++;
- }
- pools >>= 1;
- }
- }
- /* don't handle RD */
- if (reason & uPD98401_INT_SPE)
- printk(KERN_ALERT DEV_LABEL "(itf %d): system parity "
- "error at 0x%08x\n",dev->number,zin(ADDR));
- if (reason & uPD98401_INT_CPE)
- printk(KERN_ALERT DEV_LABEL "(itf %d): control memory "
- "parity error at 0x%08x\n",dev->number,zin(ADDR));
- if (reason & uPD98401_INT_SBE) {
- printk(KERN_ALERT DEV_LABEL "(itf %d): system bus "
- "error at 0x%08x\n",dev->number,zin(ADDR));
- event_dump();
- }
- /* don't handle IND */
- if (reason & uPD98401_INT_MF) {
- printk(KERN_CRIT DEV_LABEL "(itf %d): mailbox full "
- "(0x%x)\n",dev->number,(reason & uPD98401_INT_MF)
- >> uPD98401_INT_MF_SHIFT);
- event_dump();
- /* @@@ should try to recover */
- }
- if (reason & uPD98401_INT_MM) {
- if (reason & 1) poll_rx(dev,0);
- if (reason & 2) poll_rx(dev,1);
- if (reason & 4) poll_tx(dev,2);
- if (reason & 8) poll_tx(dev,3);
- }
- /* @@@ handle RCRn */
- }
- return IRQ_RETVAL(handled);
-}
-
-
-/*----------------------------- (E)EPROM access -----------------------------*/
-
-
-static void eprom_set(struct zatm_dev *zatm_dev, unsigned long value,
- unsigned short cmd)
-{
- int error;
-
- if ((error = pci_write_config_dword(zatm_dev->pci_dev,cmd,value)))
- printk(KERN_ERR DEV_LABEL ": PCI write failed (0x%02x)\n",
- error);
-}
-
-
-static unsigned long eprom_get(struct zatm_dev *zatm_dev, unsigned short cmd)
-{
- unsigned int value;
- int error;
-
- if ((error = pci_read_config_dword(zatm_dev->pci_dev,cmd,&value)))
- printk(KERN_ERR DEV_LABEL ": PCI read failed (0x%02x)\n",
- error);
- return value;
-}
-
-
-static void eprom_put_bits(struct zatm_dev *zatm_dev, unsigned long data,
- int bits, unsigned short cmd)
-{
- unsigned long value;
- int i;
-
- for (i = bits-1; i >= 0; i--) {
- value = ZEPROM_CS | (((data >> i) & 1) ? ZEPROM_DI : 0);
- eprom_set(zatm_dev,value,cmd);
- eprom_set(zatm_dev,value | ZEPROM_SK,cmd);
- eprom_set(zatm_dev,value,cmd);
- }
-}
-
-
-static void eprom_get_byte(struct zatm_dev *zatm_dev, unsigned char *byte,
- unsigned short cmd)
-{
- int i;
-
- *byte = 0;
- for (i = 8; i; i--) {
- eprom_set(zatm_dev,ZEPROM_CS,cmd);
- eprom_set(zatm_dev,ZEPROM_CS | ZEPROM_SK,cmd);
- *byte <<= 1;
- if (eprom_get(zatm_dev,cmd) & ZEPROM_DO) *byte |= 1;
- eprom_set(zatm_dev,ZEPROM_CS,cmd);
- }
-}
-
-
-static int eprom_try_esi(struct atm_dev *dev, unsigned short cmd, int offset,
- int swap)
-{
- unsigned char buf[ZEPROM_SIZE];
- struct zatm_dev *zatm_dev;
- int i;
-
- zatm_dev = ZATM_DEV(dev);
- for (i = 0; i < ZEPROM_SIZE; i += 2) {
- eprom_set(zatm_dev,ZEPROM_CS,cmd); /* select EPROM */
- eprom_put_bits(zatm_dev,ZEPROM_CMD_READ,ZEPROM_CMD_LEN,cmd);
- eprom_put_bits(zatm_dev,i >> 1,ZEPROM_ADDR_LEN,cmd);
- eprom_get_byte(zatm_dev,buf+i+swap,cmd);
- eprom_get_byte(zatm_dev,buf+i+1-swap,cmd);
- eprom_set(zatm_dev,0,cmd); /* deselect EPROM */
- }
- memcpy(dev->esi,buf+offset,ESI_LEN);
- return memcmp(dev->esi,"\0\0\0\0\0",ESI_LEN); /* assumes ESI_LEN == 6 */
-}
-
-
-static void eprom_get_esi(struct atm_dev *dev)
-{
- if (eprom_try_esi(dev,ZEPROM_V1_REG,ZEPROM_V1_ESI_OFF,1)) return;
- (void) eprom_try_esi(dev,ZEPROM_V2_REG,ZEPROM_V2_ESI_OFF,0);
-}
-
-
-/*--------------------------------- entries ---------------------------------*/
-
-
-static int zatm_init(struct atm_dev *dev)
-{
- struct zatm_dev *zatm_dev;
- struct pci_dev *pci_dev;
- unsigned short command;
- int error,i,last;
- unsigned long t0,t1,t2;
-
- DPRINTK(">zatm_init\n");
- zatm_dev = ZATM_DEV(dev);
- spin_lock_init(&zatm_dev->lock);
- pci_dev = zatm_dev->pci_dev;
- zatm_dev->base = pci_resource_start(pci_dev, 0);
- zatm_dev->irq = pci_dev->irq;
- if ((error = pci_read_config_word(pci_dev,PCI_COMMAND,&command))) {
- printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%02x\n",
- dev->number,error);
- return -EINVAL;
- }
- if ((error = pci_write_config_word(pci_dev,PCI_COMMAND,
- command | PCI_COMMAND_IO | PCI_COMMAND_MASTER))) {
- printk(KERN_ERR DEV_LABEL "(itf %d): can't enable IO (0x%02x)"
- "\n",dev->number,error);
- return -EIO;
- }
- eprom_get_esi(dev);
- printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d,base=0x%x,irq=%d,",
- dev->number,pci_dev->revision,zatm_dev->base,zatm_dev->irq);
- /* reset uPD98401 */
- zout(0,SWR);
- while (!(zin(GSR) & uPD98401_INT_IND));
- zout(uPD98401_GMR_ONE /*uPD98401_BURST4*/,GMR);
- last = MAX_CRAM_SIZE;
- for (i = last-RAM_INCREMENT; i >= 0; i -= RAM_INCREMENT) {
- zpokel(zatm_dev,0x55555555,i);
- if (zpeekl(zatm_dev,i) != 0x55555555) last = i;
- else {
- zpokel(zatm_dev,0xAAAAAAAA,i);
- if (zpeekl(zatm_dev,i) != 0xAAAAAAAA) last = i;
- else zpokel(zatm_dev,i,i);
- }
- }
- for (i = 0; i < last; i += RAM_INCREMENT)
- if (zpeekl(zatm_dev,i) != i) break;
- zatm_dev->mem = i << 2;
- while (i) zpokel(zatm_dev,0,--i);
- /* reset again to rebuild memory pointers */
- zout(0,SWR);
- while (!(zin(GSR) & uPD98401_INT_IND));
- zout(uPD98401_GMR_ONE | uPD98401_BURST8 | uPD98401_BURST4 |
- uPD98401_BURST2 | uPD98401_GMR_PM | uPD98401_GMR_DR,GMR);
- /* TODO: should shrink allocation now */
- printk("mem=%dkB,%s (",zatm_dev->mem >> 10,zatm_dev->copper ? "UTP" :
- "MMF");
- for (i = 0; i < ESI_LEN; i++)
- printk("%02X%s",dev->esi[i],i == ESI_LEN-1 ? ")\n" : "-");
- do {
- unsigned long flags;
-
- spin_lock_irqsave(&zatm_dev->lock, flags);
- t0 = zpeekl(zatm_dev,uPD98401_TSR);
- udelay(10);
- t1 = zpeekl(zatm_dev,uPD98401_TSR);
- udelay(1010);
- t2 = zpeekl(zatm_dev,uPD98401_TSR);
- spin_unlock_irqrestore(&zatm_dev->lock, flags);
- }
- while (t0 > t1 || t1 > t2); /* loop if wrapping ... */
- zatm_dev->khz = t2-2*t1+t0;
- printk(KERN_NOTICE DEV_LABEL "(itf %d): uPD98401 %d.%d at %d.%03d "
- "MHz\n",dev->number,
- (zin(VER) & uPD98401_MAJOR) >> uPD98401_MAJOR_SHIFT,
- zin(VER) & uPD98401_MINOR,zatm_dev->khz/1000,zatm_dev->khz % 1000);
- return uPD98402_init(dev);
-}
-
-
-static int zatm_start(struct atm_dev *dev)
-{
- struct zatm_dev *zatm_dev = ZATM_DEV(dev);
- struct pci_dev *pdev = zatm_dev->pci_dev;
- unsigned long curr;
- int pools,vccs,rx;
- int error, i, ld;
-
- DPRINTK("zatm_start\n");
- zatm_dev->rx_map = zatm_dev->tx_map = NULL;
- for (i = 0; i < NR_MBX; i++)
- zatm_dev->mbx_start[i] = 0;
- error = request_irq(zatm_dev->irq, zatm_int, IRQF_SHARED, DEV_LABEL, dev);
- if (error < 0) {
- printk(KERN_ERR DEV_LABEL "(itf %d): IRQ%d is already in use\n",
- dev->number,zatm_dev->irq);
- goto done;
- }
- /* define memory regions */
- pools = NR_POOLS;
- if (NR_SHAPERS*SHAPER_SIZE > pools*POOL_SIZE)
- pools = NR_SHAPERS*SHAPER_SIZE/POOL_SIZE;
- vccs = (zatm_dev->mem-NR_SHAPERS*SHAPER_SIZE-pools*POOL_SIZE)/
- (2*VC_SIZE+RX_SIZE);
- ld = -1;
- for (rx = 1; rx < vccs; rx <<= 1) ld++;
- dev->ci_range.vpi_bits = 0; /* @@@ no VPI for now */
- dev->ci_range.vci_bits = ld;
- dev->link_rate = ATM_OC3_PCR;
- zatm_dev->chans = vccs; /* ??? */
- curr = rx*RX_SIZE/4;
- DPRINTK("RX pool 0x%08lx\n",curr);
- zpokel(zatm_dev,curr,uPD98401_PMA); /* receive pool */
- zatm_dev->pool_base = curr;
- curr += pools*POOL_SIZE/4;
- DPRINTK("Shapers 0x%08lx\n",curr);
- zpokel(zatm_dev,curr,uPD98401_SMA); /* shapers */
- curr += NR_SHAPERS*SHAPER_SIZE/4;
- DPRINTK("Free 0x%08lx\n",curr);
- zpokel(zatm_dev,curr,uPD98401_TOS); /* free pool */
- printk(KERN_INFO DEV_LABEL "(itf %d): %d shapers, %d pools, %d RX, "
- "%ld VCs\n",dev->number,NR_SHAPERS,pools,rx,
- (zatm_dev->mem-curr*4)/VC_SIZE);
- /* create mailboxes */
- for (i = 0; i < NR_MBX; i++) {
- void *mbx;
- dma_addr_t mbx_dma;
-
- if (!mbx_entries[i])
- continue;
- mbx = dma_alloc_coherent(&pdev->dev,
- 2 * MBX_SIZE(i), &mbx_dma, GFP_KERNEL);
- if (!mbx) {
- error = -ENOMEM;
- goto out;
- }
- /*
- * Alignment provided by dma_alloc_coherent() isn't enough
- * for this device.
- */
- if (((unsigned long)mbx ^ mbx_dma) & 0xffff) {
- printk(KERN_ERR DEV_LABEL "(itf %d): system "
- "bus incompatible with driver\n", dev->number);
- dma_free_coherent(&pdev->dev, 2*MBX_SIZE(i), mbx, mbx_dma);
- error = -ENODEV;
- goto out;
- }
- DPRINTK("mbx@0x%08lx-0x%08lx\n", mbx, mbx + MBX_SIZE(i));
- zatm_dev->mbx_start[i] = (unsigned long)mbx;
- zatm_dev->mbx_dma[i] = mbx_dma;
- zatm_dev->mbx_end[i] = (zatm_dev->mbx_start[i] + MBX_SIZE(i)) &
- 0xffff;
- zout(mbx_dma >> 16, MSH(i));
- zout(mbx_dma, MSL(i));
- zout(zatm_dev->mbx_end[i], MBA(i));
- zout((unsigned long)mbx & 0xffff, MTA(i));
- zout((unsigned long)mbx & 0xffff, MWA(i));
- }
- error = start_tx(dev);
- if (error)
- goto out;
- error = start_rx(dev);
- if (error)
- goto out_tx;
- error = dev->phy->start(dev);
- if (error)
- goto out_rx;
- zout(0xffffffff,IMR); /* enable interrupts */
- /* enable TX & RX */
- zout(zin(GMR) | uPD98401_GMR_SE | uPD98401_GMR_RE,GMR);
-done:
- return error;
-
-out_rx:
- kfree(zatm_dev->rx_map);
-out_tx:
- kfree(zatm_dev->tx_map);
-out:
- while (i-- > 0) {
- dma_free_coherent(&pdev->dev, 2 * MBX_SIZE(i),
- (void *)zatm_dev->mbx_start[i],
- zatm_dev->mbx_dma[i]);
- }
- free_irq(zatm_dev->irq, dev);
- goto done;
-}
-
-
-static void zatm_close(struct atm_vcc *vcc)
-{
- DPRINTK(">zatm_close\n");
- if (!ZATM_VCC(vcc)) return;
- clear_bit(ATM_VF_READY,&vcc->flags);
- close_rx(vcc);
- EVENT("close_tx\n",0,0);
- close_tx(vcc);
- DPRINTK("zatm_close: done waiting\n");
- /* deallocate memory */
- kfree(ZATM_VCC(vcc));
- vcc->dev_data = NULL;
- clear_bit(ATM_VF_ADDR,&vcc->flags);
-}
-
-
-static int zatm_open(struct atm_vcc *vcc)
-{
- struct zatm_vcc *zatm_vcc;
- short vpi = vcc->vpi;
- int vci = vcc->vci;
- int error;
-
- DPRINTK(">zatm_open\n");
- if (!test_bit(ATM_VF_PARTIAL,&vcc->flags))
- vcc->dev_data = NULL;
- if (vci != ATM_VPI_UNSPEC && vpi != ATM_VCI_UNSPEC)
- set_bit(ATM_VF_ADDR,&vcc->flags);
- if (vcc->qos.aal != ATM_AAL5) return -EINVAL; /* @@@ AAL0 */
- DPRINTK(DEV_LABEL "(itf %d): open %d.%d\n",vcc->dev->number,vcc->vpi,
- vcc->vci);
- if (!test_bit(ATM_VF_PARTIAL,&vcc->flags)) {
- zatm_vcc = kmalloc(sizeof(*zatm_vcc), GFP_KERNEL);
- if (!zatm_vcc) {
- clear_bit(ATM_VF_ADDR,&vcc->flags);
- return -ENOMEM;
- }
- vcc->dev_data = zatm_vcc;
- ZATM_VCC(vcc)->tx_chan = 0; /* for zatm_close after open_rx */
- if ((error = open_rx_first(vcc))) {
- zatm_close(vcc);
- return error;
- }
- if ((error = open_tx_first(vcc))) {
- zatm_close(vcc);
- return error;
- }
- }
- if (vci == ATM_VPI_UNSPEC || vpi == ATM_VCI_UNSPEC) return 0;
- if ((error = open_rx_second(vcc))) {
- zatm_close(vcc);
- return error;
- }
- if ((error = open_tx_second(vcc))) {
- zatm_close(vcc);
- return error;
- }
- set_bit(ATM_VF_READY,&vcc->flags);
- return 0;
-}
-
-
-static int zatm_change_qos(struct atm_vcc *vcc,struct atm_qos *qos,int flags)
-{
- printk("Not yet implemented\n");
- return -ENOSYS;
- /* @@@ */
-}
-
-
-static int zatm_ioctl(struct atm_dev *dev,unsigned int cmd,void __user *arg)
-{
- struct zatm_dev *zatm_dev;
- unsigned long flags;
-
- zatm_dev = ZATM_DEV(dev);
- switch (cmd) {
- case ZATM_GETPOOLZ:
- if (!capable(CAP_NET_ADMIN)) return -EPERM;
- fallthrough;
- case ZATM_GETPOOL:
- {
- struct zatm_pool_info info;
- int pool;
-
- if (get_user(pool,
- &((struct zatm_pool_req __user *) arg)->pool_num))
- return -EFAULT;
- if (pool < 0 || pool > ZATM_LAST_POOL)
- return -EINVAL;
- pool = array_index_nospec(pool,
- ZATM_LAST_POOL + 1);
- spin_lock_irqsave(&zatm_dev->lock, flags);
- info = zatm_dev->pool_info[pool];
- if (cmd == ZATM_GETPOOLZ) {
- zatm_dev->pool_info[pool].rqa_count = 0;
- zatm_dev->pool_info[pool].rqu_count = 0;
- }
- spin_unlock_irqrestore(&zatm_dev->lock, flags);
- return copy_to_user(
- &((struct zatm_pool_req __user *) arg)->info,
- &info,sizeof(info)) ? -EFAULT : 0;
- }
- case ZATM_SETPOOL:
- {
- struct zatm_pool_info info;
- int pool;
-
- if (!capable(CAP_NET_ADMIN)) return -EPERM;
- if (get_user(pool,
- &((struct zatm_pool_req __user *) arg)->pool_num))
- return -EFAULT;
- if (pool < 0 || pool > ZATM_LAST_POOL)
- return -EINVAL;
- pool = array_index_nospec(pool,
- ZATM_LAST_POOL + 1);
- if (copy_from_user(&info,
- &((struct zatm_pool_req __user *) arg)->info,
- sizeof(info))) return -EFAULT;
- if (!info.low_water)
- info.low_water = zatm_dev->
- pool_info[pool].low_water;
- if (!info.high_water)
- info.high_water = zatm_dev->
- pool_info[pool].high_water;
- if (!info.next_thres)
- info.next_thres = zatm_dev->
- pool_info[pool].next_thres;
- if (info.low_water >= info.high_water ||
- info.low_water < 0)
- return -EINVAL;
- spin_lock_irqsave(&zatm_dev->lock, flags);
- zatm_dev->pool_info[pool].low_water =
- info.low_water;
- zatm_dev->pool_info[pool].high_water =
- info.high_water;
- zatm_dev->pool_info[pool].next_thres =
- info.next_thres;
- spin_unlock_irqrestore(&zatm_dev->lock, flags);
- return 0;
- }
- default:
- if (!dev->phy->ioctl) return -ENOIOCTLCMD;
- return dev->phy->ioctl(dev,cmd,arg);
- }
-}
-
-static int zatm_send(struct atm_vcc *vcc,struct sk_buff *skb)
-{
- int error;
-
- EVENT(">zatm_send 0x%lx\n",(unsigned long) skb,0);
- if (!ZATM_VCC(vcc)->tx_chan || !test_bit(ATM_VF_READY,&vcc->flags)) {
- if (vcc->pop) vcc->pop(vcc,skb);
- else dev_kfree_skb(skb);
- return -EINVAL;
- }
- if (!skb) {
- printk(KERN_CRIT "!skb in zatm_send ?\n");
- if (vcc->pop) vcc->pop(vcc,skb);
- return -EINVAL;
- }
- ATM_SKB(skb)->vcc = vcc;
- error = do_tx(skb);
- if (error != RING_BUSY) return error;
- skb_queue_tail(&ZATM_VCC(vcc)->backlog,skb);
- return 0;
-}
-
-
-static void zatm_phy_put(struct atm_dev *dev,unsigned char value,
- unsigned long addr)
-{
- struct zatm_dev *zatm_dev;
-
- zatm_dev = ZATM_DEV(dev);
- zwait();
- zout(value,CER);
- zout(uPD98401_IND_ACC | uPD98401_IA_B0 |
- (uPD98401_IA_TGT_PHY << uPD98401_IA_TGT_SHIFT) | addr,CMR);
-}
-
-
-static unsigned char zatm_phy_get(struct atm_dev *dev,unsigned long addr)
-{
- struct zatm_dev *zatm_dev;
-
- zatm_dev = ZATM_DEV(dev);
- zwait();
- zout(uPD98401_IND_ACC | uPD98401_IA_B0 | uPD98401_IA_RW |
- (uPD98401_IA_TGT_PHY << uPD98401_IA_TGT_SHIFT) | addr,CMR);
- zwait();
- return zin(CER) & 0xff;
-}
-
-
-static const struct atmdev_ops ops = {
- .open = zatm_open,
- .close = zatm_close,
- .ioctl = zatm_ioctl,
- .send = zatm_send,
- .phy_put = zatm_phy_put,
- .phy_get = zatm_phy_get,
- .change_qos = zatm_change_qos,
-};
-
-static int zatm_init_one(struct pci_dev *pci_dev,
- const struct pci_device_id *ent)
-{
- struct atm_dev *dev;
- struct zatm_dev *zatm_dev;
- int ret = -ENOMEM;
-
- zatm_dev = kmalloc(sizeof(*zatm_dev), GFP_KERNEL);
- if (!zatm_dev) {
- printk(KERN_EMERG "%s: memory shortage\n", DEV_LABEL);
- goto out;
- }
-
- dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &ops, -1, NULL);
- if (!dev)
- goto out_free;
-
- ret = pci_enable_device(pci_dev);
- if (ret < 0)
- goto out_deregister;
-
- ret = pci_request_regions(pci_dev, DEV_LABEL);
- if (ret < 0)
- goto out_disable;
-
- ret = dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(32));
- if (ret < 0)
- goto out_release;
-
- zatm_dev->pci_dev = pci_dev;
- dev->dev_data = zatm_dev;
- zatm_dev->copper = (int)ent->driver_data;
- if ((ret = zatm_init(dev)) || (ret = zatm_start(dev)))
- goto out_release;
-
- pci_set_drvdata(pci_dev, dev);
- zatm_dev->more = zatm_boards;
- zatm_boards = dev;
- ret = 0;
-out:
- return ret;
-
-out_release:
- pci_release_regions(pci_dev);
-out_disable:
- pci_disable_device(pci_dev);
-out_deregister:
- atm_dev_deregister(dev);
-out_free:
- kfree(zatm_dev);
- goto out;
-}
-
-
-MODULE_LICENSE("GPL");
-
-static const struct pci_device_id zatm_pci_tbl[] = {
- { PCI_VDEVICE(ZEITNET, PCI_DEVICE_ID_ZEITNET_1221), ZATM_COPPER },
- { PCI_VDEVICE(ZEITNET, PCI_DEVICE_ID_ZEITNET_1225), 0 },
- { 0, }
-};
-MODULE_DEVICE_TABLE(pci, zatm_pci_tbl);
-
-static struct pci_driver zatm_driver = {
- .name = DEV_LABEL,
- .id_table = zatm_pci_tbl,
- .probe = zatm_init_one,
-};
-
-static int __init zatm_init_module(void)
-{
- return pci_register_driver(&zatm_driver);
-}
-
-module_init(zatm_init_module);
-/* module_exit not defined so not unloadable */
diff --git a/drivers/atm/zatm.h b/drivers/atm/zatm.h
deleted file mode 100644
index 8204369fe825..000000000000
--- a/drivers/atm/zatm.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* drivers/atm/zatm.h - ZeitNet ZN122x device driver declarations */
-
-/* Written 1995-1998 by Werner Almesberger, EPFL LRC/ICA */
-
-
-#ifndef DRIVER_ATM_ZATM_H
-#define DRIVER_ATM_ZATM_H
-
-#include <linux/skbuff.h>
-#include <linux/atm.h>
-#include <linux/atmdev.h>
-#include <linux/sonet.h>
-#include <linux/pci.h>
-
-
-#define DEV_LABEL "zatm"
-
-#define MAX_AAL5_PDU 10240 /* allocate for AAL5 PDUs of this size */
-#define MAX_RX_SIZE_LD 14 /* ceil(log2((MAX_AAL5_PDU+47)/48)) */
-
-#define LOW_MARK 12 /* start adding new buffers if less than 12 */
-#define HIGH_MARK 30 /* stop adding buffers after reaching 30 */
-#define OFF_CNG_THRES 5 /* threshold for offset changes */
-
-#define RX_SIZE 2 /* RX lookup entry size (in bytes) */
-#define NR_POOLS 32 /* number of free buffer pointers */
-#define POOL_SIZE 8 /* buffer entry size (in bytes) */
-#define NR_SHAPERS 16 /* number of shapers */
-#define SHAPER_SIZE 4 /* shaper entry size (in bytes) */
-#define VC_SIZE 32 /* VC dsc (TX or RX) size (in bytes) */
-
-#define RING_ENTRIES 32 /* ring entries (without back pointer) */
-#define RING_WORDS 4 /* ring element size */
-#define RING_SIZE (sizeof(unsigned long)*(RING_ENTRIES+1)*RING_WORDS)
-
-#define NR_MBX 4 /* four mailboxes */
-#define MBX_RX_0 0 /* mailbox indices */
-#define MBX_RX_1 1
-#define MBX_TX_0 2
-#define MBX_TX_1 3
-
-struct zatm_vcc {
- /*-------------------------------- RX part */
- int rx_chan; /* RX channel, 0 if none */
- int pool; /* free buffer pool */
- /*-------------------------------- TX part */
- int tx_chan; /* TX channel, 0 if none */
- int shaper; /* shaper, <0 if none */
- struct sk_buff_head tx_queue; /* list of buffers in transit */
- wait_queue_head_t tx_wait; /* for close */
- u32 *ring; /* transmit ring */
- int ring_curr; /* current write position */
- int txing; /* number of transmits in progress */
- struct sk_buff_head backlog; /* list of buffers waiting for ring */
-};
-
-struct zatm_dev {
- /*-------------------------------- TX part */
- int tx_bw; /* remaining bandwidth */
- u32 free_shapers; /* bit set */
- int ubr; /* UBR shaper; -1 if none */
- int ubr_ref_cnt; /* number of VCs using UBR shaper */
- /*-------------------------------- RX part */
- int pool_ref[NR_POOLS]; /* free buffer pool usage counters */
- volatile struct sk_buff *last_free[NR_POOLS];
- /* last entry in respective pool */
- struct sk_buff_head pool[NR_POOLS];/* free buffer pools */
- struct zatm_pool_info pool_info[NR_POOLS]; /* pool information */
- /*-------------------------------- maps */
- struct atm_vcc **tx_map; /* TX VCCs */
- struct atm_vcc **rx_map; /* RX VCCs */
- int chans; /* map size, must be 2^n */
- /*-------------------------------- mailboxes */
- unsigned long mbx_start[NR_MBX];/* start addresses */
- dma_addr_t mbx_dma[NR_MBX];
- u16 mbx_end[NR_MBX]; /* end offset (in bytes) */
- /*-------------------------------- other pointers */
- u32 pool_base; /* Free buffer pool dsc (word addr) */
- /*-------------------------------- ZATM links */
- struct atm_dev *more; /* other ZATM devices */
- /*-------------------------------- general information */
- int mem; /* RAM on board (in bytes) */
- int khz; /* timer clock */
- int copper; /* PHY type */
- unsigned char irq; /* IRQ */
- unsigned int base; /* IO base address */
- struct pci_dev *pci_dev; /* PCI stuff */
- spinlock_t lock;
-};
-
-
-#define ZATM_DEV(d) ((struct zatm_dev *) (d)->dev_data)
-#define ZATM_VCC(d) ((struct zatm_vcc *) (d)->dev_data)
-
-
-struct zatm_skb_prv {
- struct atm_skb_data _; /* reserved */
- u32 *dsc; /* pointer to skb's descriptor */
-};
-
-#define ZATM_PRV_DSC(skb) (((struct zatm_skb_prv *) (skb)->cb)->dsc)
-
-#endif
diff --git a/include/uapi/linux/atm_zatm.h b/include/uapi/linux/atm_zatm.h
deleted file mode 100644
index 5135027b93c1..000000000000
--- a/include/uapi/linux/atm_zatm.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/* atm_zatm.h - Driver-specific declarations of the ZATM driver (for use by
- driver-specific utilities) */
-
-/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
-
-
-#ifndef LINUX_ATM_ZATM_H
-#define LINUX_ATM_ZATM_H
-
-/*
- * Note: non-kernel programs including this file must also include
- * sys/types.h for struct timeval
- */
-
-#include <linux/atmapi.h>
-#include <linux/atmioc.h>
-
-#define ZATM_GETPOOL _IOW('a',ATMIOC_SARPRV+1,struct atmif_sioc)
- /* get pool statistics */
-#define ZATM_GETPOOLZ _IOW('a',ATMIOC_SARPRV+2,struct atmif_sioc)
- /* get statistics and zero */
-#define ZATM_SETPOOL _IOW('a',ATMIOC_SARPRV+3,struct atmif_sioc)
- /* set pool parameters */
-
-struct zatm_pool_info {
- int ref_count; /* free buffer pool usage counters */
- int low_water,high_water; /* refill parameters */
- int rqa_count,rqu_count; /* queue condition counters */
- int offset,next_off; /* alignment optimizations: offset */
- int next_cnt,next_thres; /* repetition counter and threshold */
-};
-
-struct zatm_pool_req {
- int pool_num; /* pool number */
- struct zatm_pool_info info; /* actual information */
-};
-
-#define ZATM_OAM_POOL 0 /* free buffer pool for OAM cells */
-#define ZATM_AAL0_POOL 1 /* free buffer pool for AAL0 cells */
-#define ZATM_AAL5_POOL_BASE 2 /* first AAL5 free buffer pool */
-#define ZATM_LAST_POOL ZATM_AAL5_POOL_BASE+10 /* max. 64 kB */
-
-#define ZATM_TIMER_HISTORY_SIZE 16 /* number of timer adjustments to
- record; must be 2^n */
-
-#endif
--
2.34.1
next prev parent reply other threads:[~2022-04-26 17:55 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-26 17:54 [PATCH net-next 0/6] net: remove non-Ethernet drivers using virt_to_bus() Jakub Kicinski
2022-04-26 17:54 ` [PATCH net-next 1/6] net: atm: remove support for Fujitsu FireStream ATM devices Jakub Kicinski
2022-04-26 17:54 ` [PATCH net-next 2/6] net: atm: remove support for Madge Horizon " Jakub Kicinski
2022-04-26 17:54 ` Jakub Kicinski [this message]
2022-08-10 7:36 ` [PATCH net-next 3/6] net: atm: remove support for ZeitNet ZN122x " Jiri Slaby
2022-08-10 9:11 ` Arnd Bergmann
2022-08-10 16:42 ` Jakub Kicinski
2022-08-11 5:19 ` Jiri Slaby
2022-08-11 9:18 ` Arnd Bergmann
2022-04-26 17:54 ` [PATCH net-next 4/6] net: wan: remove support for COSA and SRP synchronous serial boards Jakub Kicinski
2022-04-26 17:54 ` [PATCH net-next 5/6] net: wan: remove support for Z85230-based devices Jakub Kicinski
2022-04-26 17:54 ` [PATCH net-next 6/6] net: hamradio: remove support for DMA SCC devices Jakub Kicinski
2022-04-26 18:55 ` Thomas Osterried
2022-04-26 19:39 ` Jakub Kicinski
2022-04-27 13:27 ` Arnd Bergmann
2022-05-02 1:01 ` Thomas Osterried
2022-04-27 11:30 ` [PATCH net-next 0/6] net: remove non-Ethernet drivers using virt_to_bus() patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220426175436.417283-4-kuba@kernel.org \
--to=kuba@kernel.org \
--cc=3chas3@gmail.com \
--cc=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=linux-atm-general@lists.sourceforge.net \
--cc=linux-mips@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.