[PATCH v1 0/7] drm/bridge_connector: perform HPD enablement automatically

[PATCH v1 0/7] drm/bridge_connector: perform HPD enablement automatically

[Dmitry Baryshkov]

From all the drivers using drm_bridge_connector only iMX/dcss and OMAP
DRM driver do a proper work of calling
drm_bridge_connector_en/disable_hpd() in right places. Rather than
teaching each and every driver how to properly handle
drm_bridge_connector's HPD, make that automatic.

Add two additional drm_connector helper funcs: enable_hpd() and
disable_hpd(). Make drm_kms_helper_poll_* functions call them (as this
is the time where the drm_bridge_connector's functions are called by the
drivers too).

Dmitry Baryshkov (7):
  drm/poll-helper: merge drm_kms_helper_poll_disable() and _fini()
  drm/probe-helper: enable and disable HPD on connectors
  drm/bridge_connector: rely on drm_kms_helper_poll_* for HPD enablement
  drm/imx/dcss: stop using drm_bridge_connector_en/disable_hpd()
  drm/msm/hdmi: stop using drm_bridge_connector_en/disable_hpd()
  drm/omap: stop using drm_bridge_connector_en/disable_hpd()
  drm/bridge_connector: drop drm_bridge_connector_en/disable_hpd()

 drivers/gpu/drm/drm_bridge_connector.c   | 23 +++----------
 drivers/gpu/drm/drm_probe_helper.c       | 40 ++++++++++++++++++-----
 drivers/gpu/drm/imx/dcss/dcss-dev.c      |  4 ---
 drivers/gpu/drm/imx/dcss/dcss-kms.c      |  4 ---
 drivers/gpu/drm/msm/hdmi/hdmi.c          |  2 --
 drivers/gpu/drm/omapdrm/omap_drv.c       | 41 ------------------------
 include/drm/drm_bridge_connector.h       |  2 --
 include/drm/drm_modeset_helper_vtables.h | 22 +++++++++++++
 8 files changed, 58 insertions(+), 80 deletions(-)

-- 
2.35.1

[PATCH v1 0/7] drm/bridge_connector: perform HPD enablement automatically

[Dmitry Baryshkov]

From all the drivers using drm_bridge_connector only iMX/dcss and OMAP
DRM driver do a proper work of calling
drm_bridge_connector_en/disable_hpd() in right places. Rather than
teaching each and every driver how to properly handle
drm_bridge_connector's HPD, make that automatic.

Add two additional drm_connector helper funcs: enable_hpd() and
disable_hpd(). Make drm_kms_helper_poll_* functions call them (as this
is the time where the drm_bridge_connector's functions are called by the
drivers too).

Dmitry Baryshkov (7):
  drm/poll-helper: merge drm_kms_helper_poll_disable() and _fini()
  drm/probe-helper: enable and disable HPD on connectors
  drm/bridge_connector: rely on drm_kms_helper_poll_* for HPD enablement
  drm/imx/dcss: stop using drm_bridge_connector_en/disable_hpd()
  drm/msm/hdmi: stop using drm_bridge_connector_en/disable_hpd()
  drm/omap: stop using drm_bridge_connector_en/disable_hpd()
  drm/bridge_connector: drop drm_bridge_connector_en/disable_hpd()

 drivers/gpu/drm/drm_bridge_connector.c   | 23 +++----------
 drivers/gpu/drm/drm_probe_helper.c       | 40 ++++++++++++++++++-----
 drivers/gpu/drm/imx/dcss/dcss-dev.c      |  4 ---
 drivers/gpu/drm/imx/dcss/dcss-kms.c      |  4 ---
 drivers/gpu/drm/msm/hdmi/hdmi.c          |  2 --
 drivers/gpu/drm/omapdrm/omap_drv.c       | 41 ------------------------
 include/drm/drm_bridge_connector.h       |  2 --
 include/drm/drm_modeset_helper_vtables.h | 22 +++++++++++++
 8 files changed, 58 insertions(+), 80 deletions(-)

-- 
2.35.1

[PATCH v1 0/7] drm/bridge_connector: perform HPD enablement automatically

[Dmitry Baryshkov]

From all the drivers using drm_bridge_connector only iMX/dcss and OMAP
DRM driver do a proper work of calling
drm_bridge_connector_en/disable_hpd() in right places. Rather than
teaching each and every driver how to properly handle
drm_bridge_connector's HPD, make that automatic.

Add two additional drm_connector helper funcs: enable_hpd() and
disable_hpd(). Make drm_kms_helper_poll_* functions call them (as this
is the time where the drm_bridge_connector's functions are called by the
drivers too).

Dmitry Baryshkov (7):
  drm/poll-helper: merge drm_kms_helper_poll_disable() and _fini()
  drm/probe-helper: enable and disable HPD on connectors
  drm/bridge_connector: rely on drm_kms_helper_poll_* for HPD enablement
  drm/imx/dcss: stop using drm_bridge_connector_en/disable_hpd()
  drm/msm/hdmi: stop using drm_bridge_connector_en/disable_hpd()
  drm/omap: stop using drm_bridge_connector_en/disable_hpd()
  drm/bridge_connector: drop drm_bridge_connector_en/disable_hpd()

 drivers/gpu/drm/drm_bridge_connector.c   | 23 +++----------
 drivers/gpu/drm/drm_probe_helper.c       | 40 ++++++++++++++++++-----
 drivers/gpu/drm/imx/dcss/dcss-dev.c      |  4 ---
 drivers/gpu/drm/imx/dcss/dcss-kms.c      |  4 ---
 drivers/gpu/drm/msm/hdmi/hdmi.c          |  2 --
 drivers/gpu/drm/omapdrm/omap_drv.c       | 41 ------------------------
 include/drm/drm_bridge_connector.h       |  2 --
 include/drm/drm_modeset_helper_vtables.h | 22 +++++++++++++
 8 files changed, 58 insertions(+), 80 deletions(-)

-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 1/7] drm/poll-helper: merge drm_kms_helper_poll_disable() and _fini()

[Dmitry Baryshkov]

Merge drm_kms_helper_poll_disable() and drm_kms_helper_poll_fini() code
into a common helper function.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/drm_probe_helper.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index 682359512996..204f6999113f 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -754,6 +754,17 @@ bool drm_kms_helper_is_poll_worker(void)
 }
 EXPORT_SYMBOL(drm_kms_helper_is_poll_worker);
 
+static void drm_kms_helper_poll_disable_fini(struct drm_device *dev, bool fini)
+{
+	if (!dev->mode_config.poll_enabled)
+		return;
+
+	if (fini)
+		dev->mode_config.poll_enabled = false;
+
+	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
+}
+
 /**
  * drm_kms_helper_poll_disable - disable output polling
  * @dev: drm_device
@@ -770,9 +781,7 @@ EXPORT_SYMBOL(drm_kms_helper_is_poll_worker);
  */
 void drm_kms_helper_poll_disable(struct drm_device *dev)
 {
-	if (!dev->mode_config.poll_enabled)
-		return;
-	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
+	drm_kms_helper_poll_disable_fini(dev, false);
 }
 EXPORT_SYMBOL(drm_kms_helper_poll_disable);
 
@@ -810,11 +819,7 @@ EXPORT_SYMBOL(drm_kms_helper_poll_init);
  */
 void drm_kms_helper_poll_fini(struct drm_device *dev)
 {
-	if (!dev->mode_config.poll_enabled)
-		return;
-
-	dev->mode_config.poll_enabled = false;
-	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
+	drm_kms_helper_poll_disable_fini(dev, true);
 }
 EXPORT_SYMBOL(drm_kms_helper_poll_fini);
 
-- 
2.35.1

[PATCH v1 1/7] drm/poll-helper: merge drm_kms_helper_poll_disable() and _fini()

[Dmitry Baryshkov]

Merge drm_kms_helper_poll_disable() and drm_kms_helper_poll_fini() code
into a common helper function.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/drm_probe_helper.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index 682359512996..204f6999113f 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -754,6 +754,17 @@ bool drm_kms_helper_is_poll_worker(void)
 }
 EXPORT_SYMBOL(drm_kms_helper_is_poll_worker);
 
+static void drm_kms_helper_poll_disable_fini(struct drm_device *dev, bool fini)
+{
+	if (!dev->mode_config.poll_enabled)
+		return;
+
+	if (fini)
+		dev->mode_config.poll_enabled = false;
+
+	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
+}
+
 /**
  * drm_kms_helper_poll_disable - disable output polling
  * @dev: drm_device
@@ -770,9 +781,7 @@ EXPORT_SYMBOL(drm_kms_helper_is_poll_worker);
  */
 void drm_kms_helper_poll_disable(struct drm_device *dev)
 {
-	if (!dev->mode_config.poll_enabled)
-		return;
-	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
+	drm_kms_helper_poll_disable_fini(dev, false);
 }
 EXPORT_SYMBOL(drm_kms_helper_poll_disable);
 
@@ -810,11 +819,7 @@ EXPORT_SYMBOL(drm_kms_helper_poll_init);
  */
 void drm_kms_helper_poll_fini(struct drm_device *dev)
 {
-	if (!dev->mode_config.poll_enabled)
-		return;
-
-	dev->mode_config.poll_enabled = false;
-	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
+	drm_kms_helper_poll_disable_fini(dev, true);
 }
 EXPORT_SYMBOL(drm_kms_helper_poll_fini);
 
-- 
2.35.1

[PATCH v1 1/7] drm/poll-helper: merge drm_kms_helper_poll_disable() and _fini()

[Dmitry Baryshkov]

Merge drm_kms_helper_poll_disable() and drm_kms_helper_poll_fini() code
into a common helper function.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/drm_probe_helper.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index 682359512996..204f6999113f 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -754,6 +754,17 @@ bool drm_kms_helper_is_poll_worker(void)
 }
 EXPORT_SYMBOL(drm_kms_helper_is_poll_worker);
 
+static void drm_kms_helper_poll_disable_fini(struct drm_device *dev, bool fini)
+{
+	if (!dev->mode_config.poll_enabled)
+		return;
+
+	if (fini)
+		dev->mode_config.poll_enabled = false;
+
+	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
+}
+
 /**
  * drm_kms_helper_poll_disable - disable output polling
  * @dev: drm_device
@@ -770,9 +781,7 @@ EXPORT_SYMBOL(drm_kms_helper_is_poll_worker);
  */
 void drm_kms_helper_poll_disable(struct drm_device *dev)
 {
-	if (!dev->mode_config.poll_enabled)
-		return;
-	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
+	drm_kms_helper_poll_disable_fini(dev, false);
 }
 EXPORT_SYMBOL(drm_kms_helper_poll_disable);
 
@@ -810,11 +819,7 @@ EXPORT_SYMBOL(drm_kms_helper_poll_init);
  */
 void drm_kms_helper_poll_fini(struct drm_device *dev)
 {
-	if (!dev->mode_config.poll_enabled)
-		return;
-
-	dev->mode_config.poll_enabled = false;
-	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
+	drm_kms_helper_poll_disable_fini(dev, true);
 }
 EXPORT_SYMBOL(drm_kms_helper_poll_fini);
 
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 2/7] drm/probe-helper: enable and disable HPD on connectors

[Dmitry Baryshkov]

Intruct two drm_connector_helper_funcs: enable_hpd() and disable_hpd().
They are called by drm_kms_helper_poll_enable() and
drm_kms_helper_poll_disable() (and thus drm_kms_helper_poll_init() and
drm_kms_helper_poll_fini()) respectively.

This allows drivers to rely on drm_kms_helper_poll for enabling and
disabling HPD detection rather than doing that manually.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/drm_probe_helper.c       | 19 +++++++++++++++++++
 include/drm/drm_modeset_helper_vtables.h | 22 ++++++++++++++++++++++
 2 files changed, 41 insertions(+)

diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index 204f6999113f..7fef16cd80ff 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -251,6 +251,12 @@ void drm_kms_helper_poll_enable(struct drm_device *dev)
 
 	drm_connector_list_iter_begin(dev, &conn_iter);
 	drm_for_each_connector_iter(connector, &conn_iter) {
+		const struct drm_connector_helper_funcs *funcs =
+			connector->helper_private;
+
+		if (funcs && funcs->enable_hpd)
+			funcs->enable_hpd(connector);
+
 		if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT |
 					 DRM_CONNECTOR_POLL_DISCONNECT))
 			poll = true;
@@ -756,12 +762,25 @@ EXPORT_SYMBOL(drm_kms_helper_is_poll_worker);
 
 static void drm_kms_helper_poll_disable_fini(struct drm_device *dev, bool fini)
 {
+	struct drm_connector *connector;
+	struct drm_connector_list_iter conn_iter;
+
 	if (!dev->mode_config.poll_enabled)
 		return;
 
 	if (fini)
 		dev->mode_config.poll_enabled = false;
 
+	drm_connector_list_iter_begin(dev, &conn_iter);
+	drm_for_each_connector_iter(connector, &conn_iter) {
+		const struct drm_connector_helper_funcs *funcs =
+			connector->helper_private;
+
+		if (funcs && funcs->disable_hpd)
+			funcs->disable_hpd(connector);
+	}
+	drm_connector_list_iter_end(&conn_iter);
+
 	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
 }
 
diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h
index fdfa9f37ce05..7fa67017d303 100644
--- a/include/drm/drm_modeset_helper_vtables.h
+++ b/include/drm/drm_modeset_helper_vtables.h
@@ -1143,6 +1143,28 @@ struct drm_connector_helper_funcs {
 	 */
 	void (*cleanup_writeback_job)(struct drm_writeback_connector *connector,
 				      struct drm_writeback_job *job);
+
+	/**
+	 * @enable_hpd:
+	 *
+	 * Enable hot-plug detection for the connector.
+	 *
+	 * This operation is optional.
+	 *
+	 * This callback is used by the drm_kms_helper_poll_enable() helpers.
+	 */
+	void (*enable_hpd)(struct drm_connector *connector);
+
+	/**
+	 * @disable_hpd:
+	 *
+	 * Disable hot-plug detection for the connector.
+	 *
+	 * This operation is optional.
+	 *
+	 * This callback is used by the drm_kms_helper_poll_disable() helpers.
+	 */
+	void (*disable_hpd)(struct drm_connector *connector);
 };
 
 /**
-- 
2.35.1

[PATCH v1 2/7] drm/probe-helper: enable and disable HPD on connectors

[Dmitry Baryshkov]

Intruct two drm_connector_helper_funcs: enable_hpd() and disable_hpd().
They are called by drm_kms_helper_poll_enable() and
drm_kms_helper_poll_disable() (and thus drm_kms_helper_poll_init() and
drm_kms_helper_poll_fini()) respectively.

This allows drivers to rely on drm_kms_helper_poll for enabling and
disabling HPD detection rather than doing that manually.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/drm_probe_helper.c       | 19 +++++++++++++++++++
 include/drm/drm_modeset_helper_vtables.h | 22 ++++++++++++++++++++++
 2 files changed, 41 insertions(+)

diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index 204f6999113f..7fef16cd80ff 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -251,6 +251,12 @@ void drm_kms_helper_poll_enable(struct drm_device *dev)
 
 	drm_connector_list_iter_begin(dev, &conn_iter);
 	drm_for_each_connector_iter(connector, &conn_iter) {
+		const struct drm_connector_helper_funcs *funcs =
+			connector->helper_private;
+
+		if (funcs && funcs->enable_hpd)
+			funcs->enable_hpd(connector);
+
 		if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT |
 					 DRM_CONNECTOR_POLL_DISCONNECT))
 			poll = true;
@@ -756,12 +762,25 @@ EXPORT_SYMBOL(drm_kms_helper_is_poll_worker);
 
 static void drm_kms_helper_poll_disable_fini(struct drm_device *dev, bool fini)
 {
+	struct drm_connector *connector;
+	struct drm_connector_list_iter conn_iter;
+
 	if (!dev->mode_config.poll_enabled)
 		return;
 
 	if (fini)
 		dev->mode_config.poll_enabled = false;
 
+	drm_connector_list_iter_begin(dev, &conn_iter);
+	drm_for_each_connector_iter(connector, &conn_iter) {
+		const struct drm_connector_helper_funcs *funcs =
+			connector->helper_private;
+
+		if (funcs && funcs->disable_hpd)
+			funcs->disable_hpd(connector);
+	}
+	drm_connector_list_iter_end(&conn_iter);
+
 	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
 }
 
diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h
index fdfa9f37ce05..7fa67017d303 100644
--- a/include/drm/drm_modeset_helper_vtables.h
+++ b/include/drm/drm_modeset_helper_vtables.h
@@ -1143,6 +1143,28 @@ struct drm_connector_helper_funcs {
 	 */
 	void (*cleanup_writeback_job)(struct drm_writeback_connector *connector,
 				      struct drm_writeback_job *job);
+
+	/**
+	 * @enable_hpd:
+	 *
+	 * Enable hot-plug detection for the connector.
+	 *
+	 * This operation is optional.
+	 *
+	 * This callback is used by the drm_kms_helper_poll_enable() helpers.
+	 */
+	void (*enable_hpd)(struct drm_connector *connector);
+
+	/**
+	 * @disable_hpd:
+	 *
+	 * Disable hot-plug detection for the connector.
+	 *
+	 * This operation is optional.
+	 *
+	 * This callback is used by the drm_kms_helper_poll_disable() helpers.
+	 */
+	void (*disable_hpd)(struct drm_connector *connector);
 };
 
 /**
-- 
2.35.1

[PATCH v1 2/7] drm/probe-helper: enable and disable HPD on connectors

[Dmitry Baryshkov]

Intruct two drm_connector_helper_funcs: enable_hpd() and disable_hpd().
They are called by drm_kms_helper_poll_enable() and
drm_kms_helper_poll_disable() (and thus drm_kms_helper_poll_init() and
drm_kms_helper_poll_fini()) respectively.

This allows drivers to rely on drm_kms_helper_poll for enabling and
disabling HPD detection rather than doing that manually.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/drm_probe_helper.c       | 19 +++++++++++++++++++
 include/drm/drm_modeset_helper_vtables.h | 22 ++++++++++++++++++++++
 2 files changed, 41 insertions(+)

diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index 204f6999113f..7fef16cd80ff 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -251,6 +251,12 @@ void drm_kms_helper_poll_enable(struct drm_device *dev)
 
 	drm_connector_list_iter_begin(dev, &conn_iter);
 	drm_for_each_connector_iter(connector, &conn_iter) {
+		const struct drm_connector_helper_funcs *funcs =
+			connector->helper_private;
+
+		if (funcs && funcs->enable_hpd)
+			funcs->enable_hpd(connector);
+
 		if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT |
 					 DRM_CONNECTOR_POLL_DISCONNECT))
 			poll = true;
@@ -756,12 +762,25 @@ EXPORT_SYMBOL(drm_kms_helper_is_poll_worker);
 
 static void drm_kms_helper_poll_disable_fini(struct drm_device *dev, bool fini)
 {
+	struct drm_connector *connector;
+	struct drm_connector_list_iter conn_iter;
+
 	if (!dev->mode_config.poll_enabled)
 		return;
 
 	if (fini)
 		dev->mode_config.poll_enabled = false;
 
+	drm_connector_list_iter_begin(dev, &conn_iter);
+	drm_for_each_connector_iter(connector, &conn_iter) {
+		const struct drm_connector_helper_funcs *funcs =
+			connector->helper_private;
+
+		if (funcs && funcs->disable_hpd)
+			funcs->disable_hpd(connector);
+	}
+	drm_connector_list_iter_end(&conn_iter);
+
 	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
 }
 
diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h
index fdfa9f37ce05..7fa67017d303 100644
--- a/include/drm/drm_modeset_helper_vtables.h
+++ b/include/drm/drm_modeset_helper_vtables.h
@@ -1143,6 +1143,28 @@ struct drm_connector_helper_funcs {
 	 */
 	void (*cleanup_writeback_job)(struct drm_writeback_connector *connector,
 				      struct drm_writeback_job *job);
+
+	/**
+	 * @enable_hpd:
+	 *
+	 * Enable hot-plug detection for the connector.
+	 *
+	 * This operation is optional.
+	 *
+	 * This callback is used by the drm_kms_helper_poll_enable() helpers.
+	 */
+	void (*enable_hpd)(struct drm_connector *connector);
+
+	/**
+	 * @disable_hpd:
+	 *
+	 * Disable hot-plug detection for the connector.
+	 *
+	 * This operation is optional.
+	 *
+	 * This callback is used by the drm_kms_helper_poll_disable() helpers.
+	 */
+	void (*disable_hpd)(struct drm_connector *connector);
 };
 
 /**
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 3/7] drm/bridge_connector: rely on drm_kms_helper_poll_* for HPD enablement

[Dmitry Baryshkov]

Use drm_connector's helpers enable_hpd and disable_hpd to enable and
disable HPD automatically by the means of drm_kms_helper_poll_*
functions. As the drm_bridge_connector_enable_hpd() and
drm_bridge_connector_disable_hpd() functions are now unused, replace
them with stubs to ease driver migration.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/drm_bridge_connector.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_bridge_connector.c b/drivers/gpu/drm/drm_bridge_connector.c
index 60923cdfe8e1..1592da3b9403 100644
--- a/drivers/gpu/drm/drm_bridge_connector.c
+++ b/drivers/gpu/drm/drm_bridge_connector.c
@@ -136,6 +136,11 @@ static void drm_bridge_connector_hpd_cb(void *cb_data,
  * This is typically used by display drivers in their resume handler.
  */
 void drm_bridge_connector_enable_hpd(struct drm_connector *connector)
+{
+}
+EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd);
+
+static void _drm_bridge_connector_enable_hpd(struct drm_connector *connector)
 {
 	struct drm_bridge_connector *bridge_connector =
 		to_drm_bridge_connector(connector);
@@ -145,7 +150,6 @@ void drm_bridge_connector_enable_hpd(struct drm_connector *connector)
 		drm_bridge_hpd_enable(hpd, drm_bridge_connector_hpd_cb,
 				      bridge_connector);
 }
-EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd);
 
 /**
  * drm_bridge_connector_disable_hpd - Disable hot-plug detection for the
@@ -156,6 +160,11 @@ EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd);
  * This is typically used by display drivers in their suspend handler.
  */
 void drm_bridge_connector_disable_hpd(struct drm_connector *connector)
+{
+}
+EXPORT_SYMBOL_GPL(drm_bridge_connector_disable_hpd);
+
+static void _drm_bridge_connector_disable_hpd(struct drm_connector *connector)
 {
 	struct drm_bridge_connector *bridge_connector =
 		to_drm_bridge_connector(connector);
@@ -164,7 +173,6 @@ void drm_bridge_connector_disable_hpd(struct drm_connector *connector)
 	if (hpd)
 		drm_bridge_hpd_disable(hpd);
 }
-EXPORT_SYMBOL_GPL(drm_bridge_connector_disable_hpd);
 
 /* -----------------------------------------------------------------------------
  * Bridge Connector Functions
@@ -305,6 +313,8 @@ static int drm_bridge_connector_get_modes(struct drm_connector *connector)
 static const struct drm_connector_helper_funcs drm_bridge_connector_helper_funcs = {
 	.get_modes = drm_bridge_connector_get_modes,
 	/* No need for .mode_valid(), the bridges are checked by the core. */
+	.enable_hpd = _drm_bridge_connector_enable_hpd,
+	.disable_hpd = _drm_bridge_connector_disable_hpd,
 };
 
 /* -----------------------------------------------------------------------------
-- 
2.35.1

[PATCH v1 3/7] drm/bridge_connector: rely on drm_kms_helper_poll_* for HPD enablement

[Dmitry Baryshkov]

Use drm_connector's helpers enable_hpd and disable_hpd to enable and
disable HPD automatically by the means of drm_kms_helper_poll_*
functions. As the drm_bridge_connector_enable_hpd() and
drm_bridge_connector_disable_hpd() functions are now unused, replace
them with stubs to ease driver migration.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/drm_bridge_connector.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_bridge_connector.c b/drivers/gpu/drm/drm_bridge_connector.c
index 60923cdfe8e1..1592da3b9403 100644
--- a/drivers/gpu/drm/drm_bridge_connector.c
+++ b/drivers/gpu/drm/drm_bridge_connector.c
@@ -136,6 +136,11 @@ static void drm_bridge_connector_hpd_cb(void *cb_data,
  * This is typically used by display drivers in their resume handler.
  */
 void drm_bridge_connector_enable_hpd(struct drm_connector *connector)
+{
+}
+EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd);
+
+static void _drm_bridge_connector_enable_hpd(struct drm_connector *connector)
 {
 	struct drm_bridge_connector *bridge_connector =
 		to_drm_bridge_connector(connector);
@@ -145,7 +150,6 @@ void drm_bridge_connector_enable_hpd(struct drm_connector *connector)
 		drm_bridge_hpd_enable(hpd, drm_bridge_connector_hpd_cb,
 				      bridge_connector);
 }
-EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd);
 
 /**
  * drm_bridge_connector_disable_hpd - Disable hot-plug detection for the
@@ -156,6 +160,11 @@ EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd);
  * This is typically used by display drivers in their suspend handler.
  */
 void drm_bridge_connector_disable_hpd(struct drm_connector *connector)
+{
+}
+EXPORT_SYMBOL_GPL(drm_bridge_connector_disable_hpd);
+
+static void _drm_bridge_connector_disable_hpd(struct drm_connector *connector)
 {
 	struct drm_bridge_connector *bridge_connector =
 		to_drm_bridge_connector(connector);
@@ -164,7 +173,6 @@ void drm_bridge_connector_disable_hpd(struct drm_connector *connector)
 	if (hpd)
 		drm_bridge_hpd_disable(hpd);
 }
-EXPORT_SYMBOL_GPL(drm_bridge_connector_disable_hpd);
 
 /* -----------------------------------------------------------------------------
  * Bridge Connector Functions
@@ -305,6 +313,8 @@ static int drm_bridge_connector_get_modes(struct drm_connector *connector)
 static const struct drm_connector_helper_funcs drm_bridge_connector_helper_funcs = {
 	.get_modes = drm_bridge_connector_get_modes,
 	/* No need for .mode_valid(), the bridges are checked by the core. */
+	.enable_hpd = _drm_bridge_connector_enable_hpd,
+	.disable_hpd = _drm_bridge_connector_disable_hpd,
 };
 
 /* -----------------------------------------------------------------------------
-- 
2.35.1

[PATCH v1 3/7] drm/bridge_connector: rely on drm_kms_helper_poll_* for HPD enablement

[Dmitry Baryshkov]

Use drm_connector's helpers enable_hpd and disable_hpd to enable and
disable HPD automatically by the means of drm_kms_helper_poll_*
functions. As the drm_bridge_connector_enable_hpd() and
drm_bridge_connector_disable_hpd() functions are now unused, replace
them with stubs to ease driver migration.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/drm_bridge_connector.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_bridge_connector.c b/drivers/gpu/drm/drm_bridge_connector.c
index 60923cdfe8e1..1592da3b9403 100644
--- a/drivers/gpu/drm/drm_bridge_connector.c
+++ b/drivers/gpu/drm/drm_bridge_connector.c
@@ -136,6 +136,11 @@ static void drm_bridge_connector_hpd_cb(void *cb_data,
  * This is typically used by display drivers in their resume handler.
  */
 void drm_bridge_connector_enable_hpd(struct drm_connector *connector)
+{
+}
+EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd);
+
+static void _drm_bridge_connector_enable_hpd(struct drm_connector *connector)
 {
 	struct drm_bridge_connector *bridge_connector =
 		to_drm_bridge_connector(connector);
@@ -145,7 +150,6 @@ void drm_bridge_connector_enable_hpd(struct drm_connector *connector)
 		drm_bridge_hpd_enable(hpd, drm_bridge_connector_hpd_cb,
 				      bridge_connector);
 }
-EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd);
 
 /**
  * drm_bridge_connector_disable_hpd - Disable hot-plug detection for the
@@ -156,6 +160,11 @@ EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd);
  * This is typically used by display drivers in their suspend handler.
  */
 void drm_bridge_connector_disable_hpd(struct drm_connector *connector)
+{
+}
+EXPORT_SYMBOL_GPL(drm_bridge_connector_disable_hpd);
+
+static void _drm_bridge_connector_disable_hpd(struct drm_connector *connector)
 {
 	struct drm_bridge_connector *bridge_connector =
 		to_drm_bridge_connector(connector);
@@ -164,7 +173,6 @@ void drm_bridge_connector_disable_hpd(struct drm_connector *connector)
 	if (hpd)
 		drm_bridge_hpd_disable(hpd);
 }
-EXPORT_SYMBOL_GPL(drm_bridge_connector_disable_hpd);
 
 /* -----------------------------------------------------------------------------
  * Bridge Connector Functions
@@ -305,6 +313,8 @@ static int drm_bridge_connector_get_modes(struct drm_connector *connector)
 static const struct drm_connector_helper_funcs drm_bridge_connector_helper_funcs = {
 	.get_modes = drm_bridge_connector_get_modes,
 	/* No need for .mode_valid(), the bridges are checked by the core. */
+	.enable_hpd = _drm_bridge_connector_enable_hpd,
+	.disable_hpd = _drm_bridge_connector_disable_hpd,
 };
 
 /* -----------------------------------------------------------------------------
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 4/7] drm/imx/dcss: stop using drm_bridge_connector_en/disable_hpd()

[Dmitry Baryshkov]

The functionality of drm_bridge_connector_enable_hpd() and
drm_bridge_connector_disable_hpd() is provided automatically by the
drm_kms_poll helpers. Stop calling these functions manually.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/imx/dcss/dcss-dev.c | 4 ----
 drivers/gpu/drm/imx/dcss/dcss-kms.c | 4 ----
 2 files changed, 8 deletions(-)

diff --git a/drivers/gpu/drm/imx/dcss/dcss-dev.c b/drivers/gpu/drm/imx/dcss/dcss-dev.c
index c849533ca83e..62c5f7cd5906 100644
--- a/drivers/gpu/drm/imx/dcss/dcss-dev.c
+++ b/drivers/gpu/drm/imx/dcss/dcss-dev.c
@@ -254,8 +254,6 @@ int dcss_dev_suspend(struct device *dev)
 	struct dcss_kms_dev *kms = container_of(ddev, struct dcss_kms_dev, base);
 	int ret;
 
-	drm_bridge_connector_disable_hpd(kms->connector);
-
 	drm_mode_config_helper_suspend(ddev);
 
 	if (pm_runtime_suspended(dev))
@@ -289,8 +287,6 @@ int dcss_dev_resume(struct device *dev)
 
 	drm_mode_config_helper_resume(ddev);
 
-	drm_bridge_connector_enable_hpd(kms->connector);
-
 	return 0;
 }
 #endif /* CONFIG_PM_SLEEP */
diff --git a/drivers/gpu/drm/imx/dcss/dcss-kms.c b/drivers/gpu/drm/imx/dcss/dcss-kms.c
index 9b84df34a6a1..614073eb70b0 100644
--- a/drivers/gpu/drm/imx/dcss/dcss-kms.c
+++ b/drivers/gpu/drm/imx/dcss/dcss-kms.c
@@ -142,8 +142,6 @@ struct dcss_kms_dev *dcss_kms_attach(struct dcss_dev *dcss)
 
 	drm_kms_helper_poll_init(drm);
 
-	drm_bridge_connector_enable_hpd(kms->connector);
-
 	ret = drm_dev_register(drm, 0);
 	if (ret)
 		goto cleanup_crtc;
@@ -153,7 +151,6 @@ struct dcss_kms_dev *dcss_kms_attach(struct dcss_dev *dcss)
 	return kms;
 
 cleanup_crtc:
-	drm_bridge_connector_disable_hpd(kms->connector);
 	drm_kms_helper_poll_fini(drm);
 	dcss_crtc_deinit(crtc, drm);
 
@@ -169,7 +166,6 @@ void dcss_kms_detach(struct dcss_kms_dev *kms)
 	struct drm_device *drm = &kms->base;
 
 	drm_dev_unregister(drm);
-	drm_bridge_connector_disable_hpd(kms->connector);
 	drm_kms_helper_poll_fini(drm);
 	drm_atomic_helper_shutdown(drm);
 	drm_crtc_vblank_off(&kms->crtc.base);
-- 
2.35.1

[PATCH v1 4/7] drm/imx/dcss: stop using drm_bridge_connector_en/disable_hpd()

[Dmitry Baryshkov]

The functionality of drm_bridge_connector_enable_hpd() and
drm_bridge_connector_disable_hpd() is provided automatically by the
drm_kms_poll helpers. Stop calling these functions manually.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/imx/dcss/dcss-dev.c | 4 ----
 drivers/gpu/drm/imx/dcss/dcss-kms.c | 4 ----
 2 files changed, 8 deletions(-)

diff --git a/drivers/gpu/drm/imx/dcss/dcss-dev.c b/drivers/gpu/drm/imx/dcss/dcss-dev.c
index c849533ca83e..62c5f7cd5906 100644
--- a/drivers/gpu/drm/imx/dcss/dcss-dev.c
+++ b/drivers/gpu/drm/imx/dcss/dcss-dev.c
@@ -254,8 +254,6 @@ int dcss_dev_suspend(struct device *dev)
 	struct dcss_kms_dev *kms = container_of(ddev, struct dcss_kms_dev, base);
 	int ret;
 
-	drm_bridge_connector_disable_hpd(kms->connector);
-
 	drm_mode_config_helper_suspend(ddev);
 
 	if (pm_runtime_suspended(dev))
@@ -289,8 +287,6 @@ int dcss_dev_resume(struct device *dev)
 
 	drm_mode_config_helper_resume(ddev);
 
-	drm_bridge_connector_enable_hpd(kms->connector);
-
 	return 0;
 }
 #endif /* CONFIG_PM_SLEEP */
diff --git a/drivers/gpu/drm/imx/dcss/dcss-kms.c b/drivers/gpu/drm/imx/dcss/dcss-kms.c
index 9b84df34a6a1..614073eb70b0 100644
--- a/drivers/gpu/drm/imx/dcss/dcss-kms.c
+++ b/drivers/gpu/drm/imx/dcss/dcss-kms.c
@@ -142,8 +142,6 @@ struct dcss_kms_dev *dcss_kms_attach(struct dcss_dev *dcss)
 
 	drm_kms_helper_poll_init(drm);
 
-	drm_bridge_connector_enable_hpd(kms->connector);
-
 	ret = drm_dev_register(drm, 0);
 	if (ret)
 		goto cleanup_crtc;
@@ -153,7 +151,6 @@ struct dcss_kms_dev *dcss_kms_attach(struct dcss_dev *dcss)
 	return kms;
 
 cleanup_crtc:
-	drm_bridge_connector_disable_hpd(kms->connector);
 	drm_kms_helper_poll_fini(drm);
 	dcss_crtc_deinit(crtc, drm);
 
@@ -169,7 +166,6 @@ void dcss_kms_detach(struct dcss_kms_dev *kms)
 	struct drm_device *drm = &kms->base;
 
 	drm_dev_unregister(drm);
-	drm_bridge_connector_disable_hpd(kms->connector);
 	drm_kms_helper_poll_fini(drm);
 	drm_atomic_helper_shutdown(drm);
 	drm_crtc_vblank_off(&kms->crtc.base);
-- 
2.35.1

[PATCH v1 4/7] drm/imx/dcss: stop using drm_bridge_connector_en/disable_hpd()

[Dmitry Baryshkov]

The functionality of drm_bridge_connector_enable_hpd() and
drm_bridge_connector_disable_hpd() is provided automatically by the
drm_kms_poll helpers. Stop calling these functions manually.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/imx/dcss/dcss-dev.c | 4 ----
 drivers/gpu/drm/imx/dcss/dcss-kms.c | 4 ----
 2 files changed, 8 deletions(-)

diff --git a/drivers/gpu/drm/imx/dcss/dcss-dev.c b/drivers/gpu/drm/imx/dcss/dcss-dev.c
index c849533ca83e..62c5f7cd5906 100644
--- a/drivers/gpu/drm/imx/dcss/dcss-dev.c
+++ b/drivers/gpu/drm/imx/dcss/dcss-dev.c
@@ -254,8 +254,6 @@ int dcss_dev_suspend(struct device *dev)
 	struct dcss_kms_dev *kms = container_of(ddev, struct dcss_kms_dev, base);
 	int ret;
 
-	drm_bridge_connector_disable_hpd(kms->connector);
-
 	drm_mode_config_helper_suspend(ddev);
 
 	if (pm_runtime_suspended(dev))
@@ -289,8 +287,6 @@ int dcss_dev_resume(struct device *dev)
 
 	drm_mode_config_helper_resume(ddev);
 
-	drm_bridge_connector_enable_hpd(kms->connector);
-
 	return 0;
 }
 #endif /* CONFIG_PM_SLEEP */
diff --git a/drivers/gpu/drm/imx/dcss/dcss-kms.c b/drivers/gpu/drm/imx/dcss/dcss-kms.c
index 9b84df34a6a1..614073eb70b0 100644
--- a/drivers/gpu/drm/imx/dcss/dcss-kms.c
+++ b/drivers/gpu/drm/imx/dcss/dcss-kms.c
@@ -142,8 +142,6 @@ struct dcss_kms_dev *dcss_kms_attach(struct dcss_dev *dcss)
 
 	drm_kms_helper_poll_init(drm);
 
-	drm_bridge_connector_enable_hpd(kms->connector);
-
 	ret = drm_dev_register(drm, 0);
 	if (ret)
 		goto cleanup_crtc;
@@ -153,7 +151,6 @@ struct dcss_kms_dev *dcss_kms_attach(struct dcss_dev *dcss)
 	return kms;
 
 cleanup_crtc:
-	drm_bridge_connector_disable_hpd(kms->connector);
 	drm_kms_helper_poll_fini(drm);
 	dcss_crtc_deinit(crtc, drm);
 
@@ -169,7 +166,6 @@ void dcss_kms_detach(struct dcss_kms_dev *kms)
 	struct drm_device *drm = &kms->base;
 
 	drm_dev_unregister(drm);
-	drm_bridge_connector_disable_hpd(kms->connector);
 	drm_kms_helper_poll_fini(drm);
 	drm_atomic_helper_shutdown(drm);
 	drm_crtc_vblank_off(&kms->crtc.base);
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 5/7] drm/msm/hdmi: stop using drm_bridge_connector_en/disable_hpd()

[Dmitry Baryshkov]

The functionality of drm_bridge_connector_enable_hpd() and
drm_bridge_connector_disable_hpd() is provided automatically by the
drm_kms_poll helpers. Stop calling these functions manually.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index cf24e68864ba..da889175dd86 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -317,8 +317,6 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
 		goto fail;
 	}
 
-	drm_bridge_connector_enable_hpd(hdmi->connector);
-
 	ret = msm_hdmi_hpd_enable(hdmi->bridge);
 	if (ret < 0) {
 		DRM_DEV_ERROR(&hdmi->pdev->dev, "failed to enable HPD: %d\n", ret);
-- 
2.35.1

[PATCH v1 5/7] drm/msm/hdmi: stop using drm_bridge_connector_en/disable_hpd()

[Dmitry Baryshkov]

The functionality of drm_bridge_connector_enable_hpd() and
drm_bridge_connector_disable_hpd() is provided automatically by the
drm_kms_poll helpers. Stop calling these functions manually.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index cf24e68864ba..da889175dd86 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -317,8 +317,6 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
 		goto fail;
 	}
 
-	drm_bridge_connector_enable_hpd(hdmi->connector);
-
 	ret = msm_hdmi_hpd_enable(hdmi->bridge);
 	if (ret < 0) {
 		DRM_DEV_ERROR(&hdmi->pdev->dev, "failed to enable HPD: %d\n", ret);
-- 
2.35.1

[PATCH v1 5/7] drm/msm/hdmi: stop using drm_bridge_connector_en/disable_hpd()

[Dmitry Baryshkov]

The functionality of drm_bridge_connector_enable_hpd() and
drm_bridge_connector_disable_hpd() is provided automatically by the
drm_kms_poll helpers. Stop calling these functions manually.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index cf24e68864ba..da889175dd86 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -317,8 +317,6 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
 		goto fail;
 	}
 
-	drm_bridge_connector_enable_hpd(hdmi->connector);
-
 	ret = msm_hdmi_hpd_enable(hdmi->bridge);
 	if (ret < 0) {
 		DRM_DEV_ERROR(&hdmi->pdev->dev, "failed to enable HPD: %d\n", ret);
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 6/7] drm/omap: stop using drm_bridge_connector_en/disable_hpd()

[Dmitry Baryshkov]

The functionality of drm_bridge_connector_enable_hpd() and
drm_bridge_connector_disable_hpd() is provided automatically by the
drm_kms_poll helpers. Stop calling these functions manually.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/omapdrm/omap_drv.c | 41 ------------------------------
 1 file changed, 41 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
index eaf67b9e5f12..699ed814e021 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.c
+++ b/drivers/gpu/drm/omapdrm/omap_drv.c
@@ -545,44 +545,6 @@ static void omap_modeset_fini(struct drm_device *ddev)
 	drm_mode_config_cleanup(ddev);
 }
 
-/*
- * Enable the HPD in external components if supported
- */
-static void omap_modeset_enable_external_hpd(struct drm_device *ddev)
-{
-	struct omap_drm_private *priv = ddev->dev_private;
-	unsigned int i;
-
-	for (i = 0; i < priv->num_pipes; i++) {
-		struct drm_connector *connector = priv->pipes[i].connector;
-
-		if (!connector)
-			continue;
-
-		if (priv->pipes[i].output->bridge)
-			drm_bridge_connector_enable_hpd(connector);
-	}
-}
-
-/*
- * Disable the HPD in external components if supported
- */
-static void omap_modeset_disable_external_hpd(struct drm_device *ddev)
-{
-	struct omap_drm_private *priv = ddev->dev_private;
-	unsigned int i;
-
-	for (i = 0; i < priv->num_pipes; i++) {
-		struct drm_connector *connector = priv->pipes[i].connector;
-
-		if (!connector)
-			continue;
-
-		if (priv->pipes[i].output->bridge)
-			drm_bridge_connector_disable_hpd(connector);
-	}
-}
-
 /*
  * drm ioctl funcs
  */
@@ -782,7 +744,6 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
 	omap_fbdev_init(ddev);
 
 	drm_kms_helper_poll_init(ddev);
-	omap_modeset_enable_external_hpd(ddev);
 
 	/*
 	 * Register the DRM device with the core and the connectors with
@@ -795,7 +756,6 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
 	return 0;
 
 err_cleanup_helpers:
-	omap_modeset_disable_external_hpd(ddev);
 	drm_kms_helper_poll_fini(ddev);
 
 	omap_fbdev_fini(ddev);
@@ -822,7 +782,6 @@ static void omapdrm_cleanup(struct omap_drm_private *priv)
 
 	drm_dev_unregister(ddev);
 
-	omap_modeset_disable_external_hpd(ddev);
 	drm_kms_helper_poll_fini(ddev);
 
 	omap_fbdev_fini(ddev);
-- 
2.35.1

[PATCH v1 6/7] drm/omap: stop using drm_bridge_connector_en/disable_hpd()

[Dmitry Baryshkov]

The functionality of drm_bridge_connector_enable_hpd() and
drm_bridge_connector_disable_hpd() is provided automatically by the
drm_kms_poll helpers. Stop calling these functions manually.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/omapdrm/omap_drv.c | 41 ------------------------------
 1 file changed, 41 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
index eaf67b9e5f12..699ed814e021 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.c
+++ b/drivers/gpu/drm/omapdrm/omap_drv.c
@@ -545,44 +545,6 @@ static void omap_modeset_fini(struct drm_device *ddev)
 	drm_mode_config_cleanup(ddev);
 }
 
-/*
- * Enable the HPD in external components if supported
- */
-static void omap_modeset_enable_external_hpd(struct drm_device *ddev)
-{
-	struct omap_drm_private *priv = ddev->dev_private;
-	unsigned int i;
-
-	for (i = 0; i < priv->num_pipes; i++) {
-		struct drm_connector *connector = priv->pipes[i].connector;
-
-		if (!connector)
-			continue;
-
-		if (priv->pipes[i].output->bridge)
-			drm_bridge_connector_enable_hpd(connector);
-	}
-}
-
-/*
- * Disable the HPD in external components if supported
- */
-static void omap_modeset_disable_external_hpd(struct drm_device *ddev)
-{
-	struct omap_drm_private *priv = ddev->dev_private;
-	unsigned int i;
-
-	for (i = 0; i < priv->num_pipes; i++) {
-		struct drm_connector *connector = priv->pipes[i].connector;
-
-		if (!connector)
-			continue;
-
-		if (priv->pipes[i].output->bridge)
-			drm_bridge_connector_disable_hpd(connector);
-	}
-}
-
 /*
  * drm ioctl funcs
  */
@@ -782,7 +744,6 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
 	omap_fbdev_init(ddev);
 
 	drm_kms_helper_poll_init(ddev);
-	omap_modeset_enable_external_hpd(ddev);
 
 	/*
 	 * Register the DRM device with the core and the connectors with
@@ -795,7 +756,6 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
 	return 0;
 
 err_cleanup_helpers:
-	omap_modeset_disable_external_hpd(ddev);
 	drm_kms_helper_poll_fini(ddev);
 
 	omap_fbdev_fini(ddev);
@@ -822,7 +782,6 @@ static void omapdrm_cleanup(struct omap_drm_private *priv)
 
 	drm_dev_unregister(ddev);
 
-	omap_modeset_disable_external_hpd(ddev);
 	drm_kms_helper_poll_fini(ddev);
 
 	omap_fbdev_fini(ddev);
-- 
2.35.1

[PATCH v1 6/7] drm/omap: stop using drm_bridge_connector_en/disable_hpd()

[Dmitry Baryshkov]

The functionality of drm_bridge_connector_enable_hpd() and
drm_bridge_connector_disable_hpd() is provided automatically by the
drm_kms_poll helpers. Stop calling these functions manually.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/omapdrm/omap_drv.c | 41 ------------------------------
 1 file changed, 41 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
index eaf67b9e5f12..699ed814e021 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.c
+++ b/drivers/gpu/drm/omapdrm/omap_drv.c
@@ -545,44 +545,6 @@ static void omap_modeset_fini(struct drm_device *ddev)
 	drm_mode_config_cleanup(ddev);
 }
 
-/*
- * Enable the HPD in external components if supported
- */
-static void omap_modeset_enable_external_hpd(struct drm_device *ddev)
-{
-	struct omap_drm_private *priv = ddev->dev_private;
-	unsigned int i;
-
-	for (i = 0; i < priv->num_pipes; i++) {
-		struct drm_connector *connector = priv->pipes[i].connector;
-
-		if (!connector)
-			continue;
-
-		if (priv->pipes[i].output->bridge)
-			drm_bridge_connector_enable_hpd(connector);
-	}
-}
-
-/*
- * Disable the HPD in external components if supported
- */
-static void omap_modeset_disable_external_hpd(struct drm_device *ddev)
-{
-	struct omap_drm_private *priv = ddev->dev_private;
-	unsigned int i;
-
-	for (i = 0; i < priv->num_pipes; i++) {
-		struct drm_connector *connector = priv->pipes[i].connector;
-
-		if (!connector)
-			continue;
-
-		if (priv->pipes[i].output->bridge)
-			drm_bridge_connector_disable_hpd(connector);
-	}
-}
-
 /*
  * drm ioctl funcs
  */
@@ -782,7 +744,6 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
 	omap_fbdev_init(ddev);
 
 	drm_kms_helper_poll_init(ddev);
-	omap_modeset_enable_external_hpd(ddev);
 
 	/*
 	 * Register the DRM device with the core and the connectors with
@@ -795,7 +756,6 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
 	return 0;
 
 err_cleanup_helpers:
-	omap_modeset_disable_external_hpd(ddev);
 	drm_kms_helper_poll_fini(ddev);
 
 	omap_fbdev_fini(ddev);
@@ -822,7 +782,6 @@ static void omapdrm_cleanup(struct omap_drm_private *priv)
 
 	drm_dev_unregister(ddev);
 
-	omap_modeset_disable_external_hpd(ddev);
 	drm_kms_helper_poll_fini(ddev);
 
 	omap_fbdev_fini(ddev);
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 7/7] drm/bridge_connector: drop drm_bridge_connector_en/disable_hpd()

[Dmitry Baryshkov]

Now as all drivers stopped calling drm_bridge_connector_enable_hpd() and
drm_bridge_connector_disable_hpd() it is safe to remove them complelely.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/drm_bridge_connector.c | 25 -------------------------
 include/drm/drm_bridge_connector.h     |  2 --
 2 files changed, 27 deletions(-)

diff --git a/drivers/gpu/drm/drm_bridge_connector.c b/drivers/gpu/drm/drm_bridge_connector.c
index 1592da3b9403..d9c1f61b6fb6 100644
--- a/drivers/gpu/drm/drm_bridge_connector.c
+++ b/drivers/gpu/drm/drm_bridge_connector.c
@@ -128,18 +128,6 @@ static void drm_bridge_connector_hpd_cb(void *cb_data,
 	drm_kms_helper_hotplug_event(dev);
 }
 
-/**
- * drm_bridge_connector_enable_hpd - Enable hot-plug detection for the connector
- * @connector: The DRM bridge connector
- *
- * This function enables hot-plug detection for the given bridge connector.
- * This is typically used by display drivers in their resume handler.
- */
-void drm_bridge_connector_enable_hpd(struct drm_connector *connector)
-{
-}
-EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd);
-
 static void _drm_bridge_connector_enable_hpd(struct drm_connector *connector)
 {
 	struct drm_bridge_connector *bridge_connector =
@@ -151,19 +139,6 @@ static void _drm_bridge_connector_enable_hpd(struct drm_connector *connector)
 				      bridge_connector);
 }
 
-/**
- * drm_bridge_connector_disable_hpd - Disable hot-plug detection for the
- * connector
- * @connector: The DRM bridge connector
- *
- * This function disables hot-plug detection for the given bridge connector.
- * This is typically used by display drivers in their suspend handler.
- */
-void drm_bridge_connector_disable_hpd(struct drm_connector *connector)
-{
-}
-EXPORT_SYMBOL_GPL(drm_bridge_connector_disable_hpd);
-
 static void _drm_bridge_connector_disable_hpd(struct drm_connector *connector)
 {
 	struct drm_bridge_connector *bridge_connector =
diff --git a/include/drm/drm_bridge_connector.h b/include/drm/drm_bridge_connector.h
index 33f6c3bbdb4a..69630815fb09 100644
--- a/include/drm/drm_bridge_connector.h
+++ b/include/drm/drm_bridge_connector.h
@@ -10,8 +10,6 @@ struct drm_connector;
 struct drm_device;
 struct drm_encoder;
 
-void drm_bridge_connector_enable_hpd(struct drm_connector *connector);
-void drm_bridge_connector_disable_hpd(struct drm_connector *connector);
 struct drm_connector *drm_bridge_connector_init(struct drm_device *drm,
 						struct drm_encoder *encoder);
 
-- 
2.35.1

[PATCH v1 7/7] drm/bridge_connector: drop drm_bridge_connector_en/disable_hpd()

[Dmitry Baryshkov]

Now as all drivers stopped calling drm_bridge_connector_enable_hpd() and
drm_bridge_connector_disable_hpd() it is safe to remove them complelely.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/drm_bridge_connector.c | 25 -------------------------
 include/drm/drm_bridge_connector.h     |  2 --
 2 files changed, 27 deletions(-)

diff --git a/drivers/gpu/drm/drm_bridge_connector.c b/drivers/gpu/drm/drm_bridge_connector.c
index 1592da3b9403..d9c1f61b6fb6 100644
--- a/drivers/gpu/drm/drm_bridge_connector.c
+++ b/drivers/gpu/drm/drm_bridge_connector.c
@@ -128,18 +128,6 @@ static void drm_bridge_connector_hpd_cb(void *cb_data,
 	drm_kms_helper_hotplug_event(dev);
 }
 
-/**
- * drm_bridge_connector_enable_hpd - Enable hot-plug detection for the connector
- * @connector: The DRM bridge connector
- *
- * This function enables hot-plug detection for the given bridge connector.
- * This is typically used by display drivers in their resume handler.
- */
-void drm_bridge_connector_enable_hpd(struct drm_connector *connector)
-{
-}
-EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd);
-
 static void _drm_bridge_connector_enable_hpd(struct drm_connector *connector)
 {
 	struct drm_bridge_connector *bridge_connector =
@@ -151,19 +139,6 @@ static void _drm_bridge_connector_enable_hpd(struct drm_connector *connector)
 				      bridge_connector);
 }
 
-/**
- * drm_bridge_connector_disable_hpd - Disable hot-plug detection for the
- * connector
- * @connector: The DRM bridge connector
- *
- * This function disables hot-plug detection for the given bridge connector.
- * This is typically used by display drivers in their suspend handler.
- */
-void drm_bridge_connector_disable_hpd(struct drm_connector *connector)
-{
-}
-EXPORT_SYMBOL_GPL(drm_bridge_connector_disable_hpd);
-
 static void _drm_bridge_connector_disable_hpd(struct drm_connector *connector)
 {
 	struct drm_bridge_connector *bridge_connector =
diff --git a/include/drm/drm_bridge_connector.h b/include/drm/drm_bridge_connector.h
index 33f6c3bbdb4a..69630815fb09 100644
--- a/include/drm/drm_bridge_connector.h
+++ b/include/drm/drm_bridge_connector.h
@@ -10,8 +10,6 @@ struct drm_connector;
 struct drm_device;
 struct drm_encoder;
 
-void drm_bridge_connector_enable_hpd(struct drm_connector *connector);
-void drm_bridge_connector_disable_hpd(struct drm_connector *connector);
 struct drm_connector *drm_bridge_connector_init(struct drm_device *drm,
 						struct drm_encoder *encoder);
 
-- 
2.35.1

[PATCH v1 7/7] drm/bridge_connector: drop drm_bridge_connector_en/disable_hpd()

[Dmitry Baryshkov]

Now as all drivers stopped calling drm_bridge_connector_enable_hpd() and
drm_bridge_connector_disable_hpd() it is safe to remove them complelely.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/drm_bridge_connector.c | 25 -------------------------
 include/drm/drm_bridge_connector.h     |  2 --
 2 files changed, 27 deletions(-)

diff --git a/drivers/gpu/drm/drm_bridge_connector.c b/drivers/gpu/drm/drm_bridge_connector.c
index 1592da3b9403..d9c1f61b6fb6 100644
--- a/drivers/gpu/drm/drm_bridge_connector.c
+++ b/drivers/gpu/drm/drm_bridge_connector.c
@@ -128,18 +128,6 @@ static void drm_bridge_connector_hpd_cb(void *cb_data,
 	drm_kms_helper_hotplug_event(dev);
 }
 
-/**
- * drm_bridge_connector_enable_hpd - Enable hot-plug detection for the connector
- * @connector: The DRM bridge connector
- *
- * This function enables hot-plug detection for the given bridge connector.
- * This is typically used by display drivers in their resume handler.
- */
-void drm_bridge_connector_enable_hpd(struct drm_connector *connector)
-{
-}
-EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd);
-
 static void _drm_bridge_connector_enable_hpd(struct drm_connector *connector)
 {
 	struct drm_bridge_connector *bridge_connector =
@@ -151,19 +139,6 @@ static void _drm_bridge_connector_enable_hpd(struct drm_connector *connector)
 				      bridge_connector);
 }
 
-/**
- * drm_bridge_connector_disable_hpd - Disable hot-plug detection for the
- * connector
- * @connector: The DRM bridge connector
- *
- * This function disables hot-plug detection for the given bridge connector.
- * This is typically used by display drivers in their suspend handler.
- */
-void drm_bridge_connector_disable_hpd(struct drm_connector *connector)
-{
-}
-EXPORT_SYMBOL_GPL(drm_bridge_connector_disable_hpd);
-
 static void _drm_bridge_connector_disable_hpd(struct drm_connector *connector)
 {
 	struct drm_bridge_connector *bridge_connector =
diff --git a/include/drm/drm_bridge_connector.h b/include/drm/drm_bridge_connector.h
index 33f6c3bbdb4a..69630815fb09 100644
--- a/include/drm/drm_bridge_connector.h
+++ b/include/drm/drm_bridge_connector.h
@@ -10,8 +10,6 @@ struct drm_connector;
 struct drm_device;
 struct drm_encoder;
 
-void drm_bridge_connector_enable_hpd(struct drm_connector *connector);
-void drm_bridge_connector_disable_hpd(struct drm_connector *connector);
 struct drm_connector *drm_bridge_connector_init(struct drm_device *drm,
 						struct drm_encoder *encoder);
 
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 0/7] drm/bridge_connector: perform HPD enablement automatically

[Dmitry Baryshkov]

On 29/04/2022 21:51, Dmitry Baryshkov wrote:
>  From all the drivers using drm_bridge_connector only iMX/dcss and OMAP
> DRM driver do a proper work of calling
> drm_bridge_connector_en/disable_hpd() in right places. Rather than
> teaching each and every driver how to properly handle
> drm_bridge_connector's HPD, make that automatic.
> 
> Add two additional drm_connector helper funcs: enable_hpd() and
> disable_hpd(). Make drm_kms_helper_poll_* functions call them (as this
> is the time where the drm_bridge_connector's functions are called by the
> drivers too).

Gracious ping regarding this series. It went for two weeks w/o review.

Few additional points 'pro':
- It makes it possible to handle hpd enablement in cases where the 
driver uses a mixture of drm_bridge_connector and old connectors (msm)
- It makes it possible for other connectors to also implement dynamic 
hpd enablement/disablement in a standard way

> 
> Dmitry Baryshkov (7):
>    drm/poll-helper: merge drm_kms_helper_poll_disable() and _fini()
>    drm/probe-helper: enable and disable HPD on connectors
>    drm/bridge_connector: rely on drm_kms_helper_poll_* for HPD enablement
>    drm/imx/dcss: stop using drm_bridge_connector_en/disable_hpd()
>    drm/msm/hdmi: stop using drm_bridge_connector_en/disable_hpd()
>    drm/omap: stop using drm_bridge_connector_en/disable_hpd()
>    drm/bridge_connector: drop drm_bridge_connector_en/disable_hpd()
> 
>   drivers/gpu/drm/drm_bridge_connector.c   | 23 +++----------
>   drivers/gpu/drm/drm_probe_helper.c       | 40 ++++++++++++++++++-----
>   drivers/gpu/drm/imx/dcss/dcss-dev.c      |  4 ---
>   drivers/gpu/drm/imx/dcss/dcss-kms.c      |  4 ---
>   drivers/gpu/drm/msm/hdmi/hdmi.c          |  2 --
>   drivers/gpu/drm/omapdrm/omap_drv.c       | 41 ------------------------
>   include/drm/drm_bridge_connector.h       |  2 --
>   include/drm/drm_modeset_helper_vtables.h | 22 +++++++++++++
>   8 files changed, 58 insertions(+), 80 deletions(-)
> 


-- 
With best wishes
Dmitry

Re: [PATCH v1 0/7] drm/bridge_connector: perform HPD enablement automatically

[Dmitry Baryshkov]

On 29/04/2022 21:51, Dmitry Baryshkov wrote:
>  From all the drivers using drm_bridge_connector only iMX/dcss and OMAP
> DRM driver do a proper work of calling
> drm_bridge_connector_en/disable_hpd() in right places. Rather than
> teaching each and every driver how to properly handle
> drm_bridge_connector's HPD, make that automatic.
> 
> Add two additional drm_connector helper funcs: enable_hpd() and
> disable_hpd(). Make drm_kms_helper_poll_* functions call them (as this
> is the time where the drm_bridge_connector's functions are called by the
> drivers too).

Gracious ping regarding this series. It went for two weeks w/o review.

Few additional points 'pro':
- It makes it possible to handle hpd enablement in cases where the 
driver uses a mixture of drm_bridge_connector and old connectors (msm)
- It makes it possible for other connectors to also implement dynamic 
hpd enablement/disablement in a standard way

> 
> Dmitry Baryshkov (7):
>    drm/poll-helper: merge drm_kms_helper_poll_disable() and _fini()
>    drm/probe-helper: enable and disable HPD on connectors
>    drm/bridge_connector: rely on drm_kms_helper_poll_* for HPD enablement
>    drm/imx/dcss: stop using drm_bridge_connector_en/disable_hpd()
>    drm/msm/hdmi: stop using drm_bridge_connector_en/disable_hpd()
>    drm/omap: stop using drm_bridge_connector_en/disable_hpd()
>    drm/bridge_connector: drop drm_bridge_connector_en/disable_hpd()
> 
>   drivers/gpu/drm/drm_bridge_connector.c   | 23 +++----------
>   drivers/gpu/drm/drm_probe_helper.c       | 40 ++++++++++++++++++-----
>   drivers/gpu/drm/imx/dcss/dcss-dev.c      |  4 ---
>   drivers/gpu/drm/imx/dcss/dcss-kms.c      |  4 ---
>   drivers/gpu/drm/msm/hdmi/hdmi.c          |  2 --
>   drivers/gpu/drm/omapdrm/omap_drv.c       | 41 ------------------------
>   include/drm/drm_bridge_connector.h       |  2 --
>   include/drm/drm_modeset_helper_vtables.h | 22 +++++++++++++
>   8 files changed, 58 insertions(+), 80 deletions(-)
> 


-- 
With best wishes
Dmitry

Re: [PATCH v1 0/7] drm/bridge_connector: perform HPD enablement automatically

[Dmitry Baryshkov]

On 29/04/2022 21:51, Dmitry Baryshkov wrote:
>  From all the drivers using drm_bridge_connector only iMX/dcss and OMAP
> DRM driver do a proper work of calling
> drm_bridge_connector_en/disable_hpd() in right places. Rather than
> teaching each and every driver how to properly handle
> drm_bridge_connector's HPD, make that automatic.
> 
> Add two additional drm_connector helper funcs: enable_hpd() and
> disable_hpd(). Make drm_kms_helper_poll_* functions call them (as this
> is the time where the drm_bridge_connector's functions are called by the
> drivers too).

Gracious ping regarding this series. It went for two weeks w/o review.

Few additional points 'pro':
- It makes it possible to handle hpd enablement in cases where the 
driver uses a mixture of drm_bridge_connector and old connectors (msm)
- It makes it possible for other connectors to also implement dynamic 
hpd enablement/disablement in a standard way

> 
> Dmitry Baryshkov (7):
>    drm/poll-helper: merge drm_kms_helper_poll_disable() and _fini()
>    drm/probe-helper: enable and disable HPD on connectors
>    drm/bridge_connector: rely on drm_kms_helper_poll_* for HPD enablement
>    drm/imx/dcss: stop using drm_bridge_connector_en/disable_hpd()
>    drm/msm/hdmi: stop using drm_bridge_connector_en/disable_hpd()
>    drm/omap: stop using drm_bridge_connector_en/disable_hpd()
>    drm/bridge_connector: drop drm_bridge_connector_en/disable_hpd()
> 
>   drivers/gpu/drm/drm_bridge_connector.c   | 23 +++----------
>   drivers/gpu/drm/drm_probe_helper.c       | 40 ++++++++++++++++++-----
>   drivers/gpu/drm/imx/dcss/dcss-dev.c      |  4 ---
>   drivers/gpu/drm/imx/dcss/dcss-kms.c      |  4 ---
>   drivers/gpu/drm/msm/hdmi/hdmi.c          |  2 --
>   drivers/gpu/drm/omapdrm/omap_drv.c       | 41 ------------------------
>   include/drm/drm_bridge_connector.h       |  2 --
>   include/drm/drm_modeset_helper_vtables.h | 22 +++++++++++++
>   8 files changed, 58 insertions(+), 80 deletions(-)
> 


-- 
With best wishes
Dmitry

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 0/7] drm/bridge_connector: perform HPD enablement automatically

[Tomi Valkeinen]

Hi,

On 29/04/2022 21:51, Dmitry Baryshkov wrote:
>  From all the drivers using drm_bridge_connector only iMX/dcss and OMAP
> DRM driver do a proper work of calling
> drm_bridge_connector_en/disable_hpd() in right places. Rather than
> teaching each and every driver how to properly handle
> drm_bridge_connector's HPD, make that automatic.
> 
> Add two additional drm_connector helper funcs: enable_hpd() and
> disable_hpd(). Make drm_kms_helper_poll_* functions call them (as this
> is the time where the drm_bridge_connector's functions are called by the
> drivers too).

09077bc3116581f4d1cb961ec359ad56586e370b ("drm/bridge_connector: enable 
HPD by default if supported") was merged in March, but I think that one 
is  bit broken 
(https://lore.kernel.org/all/a28a4858-c66a-6737-a9fc-502f591ba2d5@ideasonboard.com/). 
To get omapdrm work without WARNs we could just revert that commit, but 
I think this series makes things cleaner.

There's one small problem with this series: in drm_bridge_connector.c 
the drm_bridge_hpd_disable() function is called from 
_drm_bridge_connector_disable_hpd() and from 
drm_bridge_connector_destroy(). This causes two hpd_disable calls when 
removing the driver modules. I think the call from 
drm_bridge_connector_destroy() could be removed, as 
_drm_bridge_connector_disable_hpd() should always get called when 
removing the drivers.

Dmitry, are you still interested in this series? Can you rebase on top 
of current upstream, and revert 09077bc3116581f4d1cb961ec359ad56586e370b 
first?

  Tomi

Re: [PATCH v1 0/7] drm/bridge_connector: perform HPD enablement automatically

[Tomi Valkeinen]

Hi,

On 29/04/2022 21:51, Dmitry Baryshkov wrote:
>  From all the drivers using drm_bridge_connector only iMX/dcss and OMAP
> DRM driver do a proper work of calling
> drm_bridge_connector_en/disable_hpd() in right places. Rather than
> teaching each and every driver how to properly handle
> drm_bridge_connector's HPD, make that automatic.
> 
> Add two additional drm_connector helper funcs: enable_hpd() and
> disable_hpd(). Make drm_kms_helper_poll_* functions call them (as this
> is the time where the drm_bridge_connector's functions are called by the
> drivers too).

09077bc3116581f4d1cb961ec359ad56586e370b ("drm/bridge_connector: enable 
HPD by default if supported") was merged in March, but I think that one 
is  bit broken 
(https://lore.kernel.org/all/a28a4858-c66a-6737-a9fc-502f591ba2d5@ideasonboard.com/). 
To get omapdrm work without WARNs we could just revert that commit, but 
I think this series makes things cleaner.

There's one small problem with this series: in drm_bridge_connector.c 
the drm_bridge_hpd_disable() function is called from 
_drm_bridge_connector_disable_hpd() and from 
drm_bridge_connector_destroy(). This causes two hpd_disable calls when 
removing the driver modules. I think the call from 
drm_bridge_connector_destroy() could be removed, as 
_drm_bridge_connector_disable_hpd() should always get called when 
removing the drivers.

Dmitry, are you still interested in this series? Can you rebase on top 
of current upstream, and revert 09077bc3116581f4d1cb961ec359ad56586e370b 
first?

  Tomi

Re: [PATCH v1 0/7] drm/bridge_connector: perform HPD enablement automatically

[Tomi Valkeinen]

Hi,

On 29/04/2022 21:51, Dmitry Baryshkov wrote:
>  From all the drivers using drm_bridge_connector only iMX/dcss and OMAP
> DRM driver do a proper work of calling
> drm_bridge_connector_en/disable_hpd() in right places. Rather than
> teaching each and every driver how to properly handle
> drm_bridge_connector's HPD, make that automatic.
> 
> Add two additional drm_connector helper funcs: enable_hpd() and
> disable_hpd(). Make drm_kms_helper_poll_* functions call them (as this
> is the time where the drm_bridge_connector's functions are called by the
> drivers too).

09077bc3116581f4d1cb961ec359ad56586e370b ("drm/bridge_connector: enable 
HPD by default if supported") was merged in March, but I think that one 
is  bit broken 
(https://lore.kernel.org/all/a28a4858-c66a-6737-a9fc-502f591ba2d5@ideasonboard.com/). 
To get omapdrm work without WARNs we could just revert that commit, but 
I think this series makes things cleaner.

There's one small problem with this series: in drm_bridge_connector.c 
the drm_bridge_hpd_disable() function is called from 
_drm_bridge_connector_disable_hpd() and from 
drm_bridge_connector_destroy(). This causes two hpd_disable calls when 
removing the driver modules. I think the call from 
drm_bridge_connector_destroy() could be removed, as 
_drm_bridge_connector_disable_hpd() should always get called when 
removing the drivers.

Dmitry, are you still interested in this series? Can you rebase on top 
of current upstream, and revert 09077bc3116581f4d1cb961ec359ad56586e370b 
first?

  Tomi

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 7/7] drm/bridge_connector: drop drm_bridge_connector_en/disable_hpd()

[Tomi Valkeinen]

On 29/04/2022 21:51, Dmitry Baryshkov wrote:
> Now as all drivers stopped calling drm_bridge_connector_enable_hpd() and
> drm_bridge_connector_disable_hpd() it is safe to remove them complelely.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>   drivers/gpu/drm/drm_bridge_connector.c | 25 -------------------------
>   include/drm/drm_bridge_connector.h     |  2 --
>   2 files changed, 27 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_bridge_connector.c b/drivers/gpu/drm/drm_bridge_connector.c
> index 1592da3b9403..d9c1f61b6fb6 100644
> --- a/drivers/gpu/drm/drm_bridge_connector.c
> +++ b/drivers/gpu/drm/drm_bridge_connector.c
> @@ -128,18 +128,6 @@ static void drm_bridge_connector_hpd_cb(void *cb_data,
>   	drm_kms_helper_hotplug_event(dev);
>   }
>   
> -/**
> - * drm_bridge_connector_enable_hpd - Enable hot-plug detection for the connector
> - * @connector: The DRM bridge connector
> - *
> - * This function enables hot-plug detection for the given bridge connector.
> - * This is typically used by display drivers in their resume handler.
> - */
> -void drm_bridge_connector_enable_hpd(struct drm_connector *connector)
> -{
> -}
> -EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd);
> -
>   static void _drm_bridge_connector_enable_hpd(struct drm_connector *connector)

Here (and for _drm_bridge_connector_disable_hpd) you could remove the 
prefix underscore.

  Tomi

Re: [PATCH v1 7/7] drm/bridge_connector: drop drm_bridge_connector_en/disable_hpd()

[Tomi Valkeinen]

On 29/04/2022 21:51, Dmitry Baryshkov wrote:
> Now as all drivers stopped calling drm_bridge_connector_enable_hpd() and
> drm_bridge_connector_disable_hpd() it is safe to remove them complelely.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>   drivers/gpu/drm/drm_bridge_connector.c | 25 -------------------------
>   include/drm/drm_bridge_connector.h     |  2 --
>   2 files changed, 27 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_bridge_connector.c b/drivers/gpu/drm/drm_bridge_connector.c
> index 1592da3b9403..d9c1f61b6fb6 100644
> --- a/drivers/gpu/drm/drm_bridge_connector.c
> +++ b/drivers/gpu/drm/drm_bridge_connector.c
> @@ -128,18 +128,6 @@ static void drm_bridge_connector_hpd_cb(void *cb_data,
>   	drm_kms_helper_hotplug_event(dev);
>   }
>   
> -/**
> - * drm_bridge_connector_enable_hpd - Enable hot-plug detection for the connector
> - * @connector: The DRM bridge connector
> - *
> - * This function enables hot-plug detection for the given bridge connector.
> - * This is typically used by display drivers in their resume handler.
> - */
> -void drm_bridge_connector_enable_hpd(struct drm_connector *connector)
> -{
> -}
> -EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd);
> -
>   static void _drm_bridge_connector_enable_hpd(struct drm_connector *connector)

Here (and for _drm_bridge_connector_disable_hpd) you could remove the 
prefix underscore.

  Tomi

Re: [PATCH v1 7/7] drm/bridge_connector: drop drm_bridge_connector_en/disable_hpd()

[Tomi Valkeinen]

On 29/04/2022 21:51, Dmitry Baryshkov wrote:
> Now as all drivers stopped calling drm_bridge_connector_enable_hpd() and
> drm_bridge_connector_disable_hpd() it is safe to remove them complelely.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>   drivers/gpu/drm/drm_bridge_connector.c | 25 -------------------------
>   include/drm/drm_bridge_connector.h     |  2 --
>   2 files changed, 27 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_bridge_connector.c b/drivers/gpu/drm/drm_bridge_connector.c
> index 1592da3b9403..d9c1f61b6fb6 100644
> --- a/drivers/gpu/drm/drm_bridge_connector.c
> +++ b/drivers/gpu/drm/drm_bridge_connector.c
> @@ -128,18 +128,6 @@ static void drm_bridge_connector_hpd_cb(void *cb_data,
>   	drm_kms_helper_hotplug_event(dev);
>   }
>   
> -/**
> - * drm_bridge_connector_enable_hpd - Enable hot-plug detection for the connector
> - * @connector: The DRM bridge connector
> - *
> - * This function enables hot-plug detection for the given bridge connector.
> - * This is typically used by display drivers in their resume handler.
> - */
> -void drm_bridge_connector_enable_hpd(struct drm_connector *connector)
> -{
> -}
> -EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd);
> -
>   static void _drm_bridge_connector_enable_hpd(struct drm_connector *connector)

Here (and for _drm_bridge_connector_disable_hpd) you could remove the 
prefix underscore.

  Tomi

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 0/7] drm/bridge_connector: perform HPD enablement automatically

[Dmitry Baryshkov]

On Mon, 12 Sept 2022 at 11:51, Tomi Valkeinen
<tomi.valkeinen@ideasonboard.com> wrote:
>
> Hi,
>
> On 29/04/2022 21:51, Dmitry Baryshkov wrote:
> >  From all the drivers using drm_bridge_connector only iMX/dcss and OMAP
> > DRM driver do a proper work of calling
> > drm_bridge_connector_en/disable_hpd() in right places. Rather than
> > teaching each and every driver how to properly handle
> > drm_bridge_connector's HPD, make that automatic.
> >
> > Add two additional drm_connector helper funcs: enable_hpd() and
> > disable_hpd(). Make drm_kms_helper_poll_* functions call them (as this
> > is the time where the drm_bridge_connector's functions are called by the
> > drivers too).
>
> 09077bc3116581f4d1cb961ec359ad56586e370b ("drm/bridge_connector: enable
> HPD by default if supported") was merged in March, but I think that one
> is  bit broken
> (https://lore.kernel.org/all/a28a4858-c66a-6737-a9fc-502f591ba2d5@ideasonboard.com/).
> To get omapdrm work without WARNs we could just revert that commit, but
> I think this series makes things cleaner.
>
> There's one small problem with this series: in drm_bridge_connector.c
> the drm_bridge_hpd_disable() function is called from
> _drm_bridge_connector_disable_hpd() and from
> drm_bridge_connector_destroy(). This causes two hpd_disable calls when
> removing the driver modules. I think the call from
> drm_bridge_connector_destroy() could be removed, as
> _drm_bridge_connector_disable_hpd() should always get called when
> removing the drivers.
>
> Dmitry, are you still interested in this series? Can you rebase on top
> of current upstream, and revert 09077bc3116581f4d1cb961ec359ad56586e370b
> first?

Hi, I've been a bit reluctant to continue this work after the
mentioned commit got merged. However of course I can update & resend
this patch series.

-- 
With best wishes
Dmitry

Re: [PATCH v1 0/7] drm/bridge_connector: perform HPD enablement automatically

[Dmitry Baryshkov]

On Mon, 12 Sept 2022 at 11:51, Tomi Valkeinen
<tomi.valkeinen@ideasonboard.com> wrote:
>
> Hi,
>
> On 29/04/2022 21:51, Dmitry Baryshkov wrote:
> >  From all the drivers using drm_bridge_connector only iMX/dcss and OMAP
> > DRM driver do a proper work of calling
> > drm_bridge_connector_en/disable_hpd() in right places. Rather than
> > teaching each and every driver how to properly handle
> > drm_bridge_connector's HPD, make that automatic.
> >
> > Add two additional drm_connector helper funcs: enable_hpd() and
> > disable_hpd(). Make drm_kms_helper_poll_* functions call them (as this
> > is the time where the drm_bridge_connector's functions are called by the
> > drivers too).
>
> 09077bc3116581f4d1cb961ec359ad56586e370b ("drm/bridge_connector: enable
> HPD by default if supported") was merged in March, but I think that one
> is  bit broken
> (https://lore.kernel.org/all/a28a4858-c66a-6737-a9fc-502f591ba2d5@ideasonboard.com/).
> To get omapdrm work without WARNs we could just revert that commit, but
> I think this series makes things cleaner.
>
> There's one small problem with this series: in drm_bridge_connector.c
> the drm_bridge_hpd_disable() function is called from
> _drm_bridge_connector_disable_hpd() and from
> drm_bridge_connector_destroy(). This causes two hpd_disable calls when
> removing the driver modules. I think the call from
> drm_bridge_connector_destroy() could be removed, as
> _drm_bridge_connector_disable_hpd() should always get called when
> removing the drivers.
>
> Dmitry, are you still interested in this series? Can you rebase on top
> of current upstream, and revert 09077bc3116581f4d1cb961ec359ad56586e370b
> first?

Hi, I've been a bit reluctant to continue this work after the
mentioned commit got merged. However of course I can update & resend
this patch series.

-- 
With best wishes
Dmitry

Re: [PATCH v1 0/7] drm/bridge_connector: perform HPD enablement automatically

[Dmitry Baryshkov]

On Mon, 12 Sept 2022 at 11:51, Tomi Valkeinen
<tomi.valkeinen@ideasonboard.com> wrote:
>
> Hi,
>
> On 29/04/2022 21:51, Dmitry Baryshkov wrote:
> >  From all the drivers using drm_bridge_connector only iMX/dcss and OMAP
> > DRM driver do a proper work of calling
> > drm_bridge_connector_en/disable_hpd() in right places. Rather than
> > teaching each and every driver how to properly handle
> > drm_bridge_connector's HPD, make that automatic.
> >
> > Add two additional drm_connector helper funcs: enable_hpd() and
> > disable_hpd(). Make drm_kms_helper_poll_* functions call them (as this
> > is the time where the drm_bridge_connector's functions are called by the
> > drivers too).
>
> 09077bc3116581f4d1cb961ec359ad56586e370b ("drm/bridge_connector: enable
> HPD by default if supported") was merged in March, but I think that one
> is  bit broken
> (https://lore.kernel.org/all/a28a4858-c66a-6737-a9fc-502f591ba2d5@ideasonboard.com/).
> To get omapdrm work without WARNs we could just revert that commit, but
> I think this series makes things cleaner.
>
> There's one small problem with this series: in drm_bridge_connector.c
> the drm_bridge_hpd_disable() function is called from
> _drm_bridge_connector_disable_hpd() and from
> drm_bridge_connector_destroy(). This causes two hpd_disable calls when
> removing the driver modules. I think the call from
> drm_bridge_connector_destroy() could be removed, as
> _drm_bridge_connector_disable_hpd() should always get called when
> removing the drivers.
>
> Dmitry, are you still interested in this series? Can you rebase on top
> of current upstream, and revert 09077bc3116581f4d1cb961ec359ad56586e370b
> first?

Hi, I've been a bit reluctant to continue this work after the
mentioned commit got merged. However of course I can update & resend
this patch series.

-- 
With best wishes
Dmitry

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel