* [PATCH 1/2] iio: stmpe-adc: use of_device_id for OF matching
@ 2022-05-01 10:34 ` Krzysztof Kozlowski
0 siblings, 0 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2022-05-01 10:34 UTC (permalink / raw)
To: Jonathan Cameron, Lars-Peter Clausen, Maxime Coquelin,
Alexandre Torgue, linux-iio, linux-stm32, linux-arm-kernel,
linux-kernel
Cc: Krzysztof Kozlowski
The of_device_id was added to allow module autoloading, but it should be
also used to allow driver matching via Devicetree.
This also fixes W=1 warning:
drivers/iio/adc/stmpe-adc.c:357:34: error: ‘stmpe_adc_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
drivers/iio/adc/stmpe-adc.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c
index d2d405388499..0208789fc0f5 100644
--- a/drivers/iio/adc/stmpe-adc.c
+++ b/drivers/iio/adc/stmpe-adc.c
@@ -345,21 +345,22 @@ static int __maybe_unused stmpe_adc_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(stmpe_adc_pm_ops, NULL, stmpe_adc_resume);
+static const struct of_device_id stmpe_adc_ids[] = {
+ { .compatible = "st,stmpe-adc", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, stmpe_adc_ids);
+
static struct platform_driver stmpe_adc_driver = {
.probe = stmpe_adc_probe,
.driver = {
.name = "stmpe-adc",
.pm = &stmpe_adc_pm_ops,
+ .of_match_table = stmpe_adc_ids,
},
};
module_platform_driver(stmpe_adc_driver);
-static const struct of_device_id stmpe_adc_ids[] = {
- { .compatible = "st,stmpe-adc", },
- { },
-};
-MODULE_DEVICE_TABLE(of, stmpe_adc_ids);
-
MODULE_AUTHOR("Stefan Agner <stefan.agner@toradex.com>");
MODULE_DESCRIPTION("STMPEXXX ADC driver");
MODULE_LICENSE("GPL v2");
--
2.32.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 1/2] iio: stmpe-adc: use of_device_id for OF matching
@ 2022-05-01 10:34 ` Krzysztof Kozlowski
0 siblings, 0 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2022-05-01 10:34 UTC (permalink / raw)
To: Jonathan Cameron, Lars-Peter Clausen, Maxime Coquelin,
Alexandre Torgue, linux-iio, linux-stm32, linux-arm-kernel,
linux-kernel
Cc: Krzysztof Kozlowski
The of_device_id was added to allow module autoloading, but it should be
also used to allow driver matching via Devicetree.
This also fixes W=1 warning:
drivers/iio/adc/stmpe-adc.c:357:34: error: ‘stmpe_adc_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
drivers/iio/adc/stmpe-adc.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c
index d2d405388499..0208789fc0f5 100644
--- a/drivers/iio/adc/stmpe-adc.c
+++ b/drivers/iio/adc/stmpe-adc.c
@@ -345,21 +345,22 @@ static int __maybe_unused stmpe_adc_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(stmpe_adc_pm_ops, NULL, stmpe_adc_resume);
+static const struct of_device_id stmpe_adc_ids[] = {
+ { .compatible = "st,stmpe-adc", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, stmpe_adc_ids);
+
static struct platform_driver stmpe_adc_driver = {
.probe = stmpe_adc_probe,
.driver = {
.name = "stmpe-adc",
.pm = &stmpe_adc_pm_ops,
+ .of_match_table = stmpe_adc_ids,
},
};
module_platform_driver(stmpe_adc_driver);
-static const struct of_device_id stmpe_adc_ids[] = {
- { .compatible = "st,stmpe-adc", },
- { },
-};
-MODULE_DEVICE_TABLE(of, stmpe_adc_ids);
-
MODULE_AUTHOR("Stefan Agner <stefan.agner@toradex.com>");
MODULE_DESCRIPTION("STMPEXXX ADC driver");
MODULE_LICENSE("GPL v2");
--
2.32.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/2] iio: ti-ads8688: use of_device_id for OF matching
2022-05-01 10:34 ` Krzysztof Kozlowski
@ 2022-05-01 10:34 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2022-05-01 10:34 UTC (permalink / raw)
To: Jonathan Cameron, Lars-Peter Clausen, Maxime Coquelin,
Alexandre Torgue, linux-iio, linux-stm32, linux-arm-kernel,
linux-kernel
Cc: Krzysztof Kozlowski
The of_device_id was added to allow module autoloading, but it should be
also used to allow driver matching via Devicetree.
This also fixes W=1 warning:
drivers/iio/adc/ti-ads8688.c:501:34: error: ‘ads8688_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
drivers/iio/adc/ti-ads8688.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/iio/adc/ti-ads8688.c b/drivers/iio/adc/ti-ads8688.c
index 22c2583eedd0..708cca0a63be 100644
--- a/drivers/iio/adc/ti-ads8688.c
+++ b/drivers/iio/adc/ti-ads8688.c
@@ -508,6 +508,7 @@ MODULE_DEVICE_TABLE(of, ads8688_of_match);
static struct spi_driver ads8688_driver = {
.driver = {
.name = "ads8688",
+ .of_match_table = ads8688_of_match,
},
.probe = ads8688_probe,
.remove = ads8688_remove,
--
2.32.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/2] iio: ti-ads8688: use of_device_id for OF matching
@ 2022-05-01 10:34 ` Krzysztof Kozlowski
0 siblings, 0 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2022-05-01 10:34 UTC (permalink / raw)
To: Jonathan Cameron, Lars-Peter Clausen, Maxime Coquelin,
Alexandre Torgue, linux-iio, linux-stm32, linux-arm-kernel,
linux-kernel
Cc: Krzysztof Kozlowski
The of_device_id was added to allow module autoloading, but it should be
also used to allow driver matching via Devicetree.
This also fixes W=1 warning:
drivers/iio/adc/ti-ads8688.c:501:34: error: ‘ads8688_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
drivers/iio/adc/ti-ads8688.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/iio/adc/ti-ads8688.c b/drivers/iio/adc/ti-ads8688.c
index 22c2583eedd0..708cca0a63be 100644
--- a/drivers/iio/adc/ti-ads8688.c
+++ b/drivers/iio/adc/ti-ads8688.c
@@ -508,6 +508,7 @@ MODULE_DEVICE_TABLE(of, ads8688_of_match);
static struct spi_driver ads8688_driver = {
.driver = {
.name = "ads8688",
+ .of_match_table = ads8688_of_match,
},
.probe = ads8688_probe,
.remove = ads8688_remove,
--
2.32.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] iio: stmpe-adc: use of_device_id for OF matching
2022-05-01 10:34 ` Krzysztof Kozlowski
@ 2022-05-01 18:00 ` Jonathan Cameron
-1 siblings, 0 replies; 6+ messages in thread
From: Jonathan Cameron @ 2022-05-01 18:00 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Lars-Peter Clausen, Maxime Coquelin, Alexandre Torgue, linux-iio,
linux-stm32, linux-arm-kernel, linux-kernel
On Sun, 1 May 2022 12:34:46 +0200
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
> The of_device_id was added to allow module autoloading, but it should be
> also used to allow driver matching via Devicetree.
>
> This also fixes W=1 warning:
> drivers/iio/adc/stmpe-adc.c:357:34: error: ‘stmpe_adc_ids’ defined but not used [-Werror=unused-const-variable=]
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Series applied to the togreg branch of iio.git and pushed out as testing for 0-day
to poke at it.
Thanks,
Jonathan
> ---
> drivers/iio/adc/stmpe-adc.c | 13 +++++++------
> 1 file changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c
> index d2d405388499..0208789fc0f5 100644
> --- a/drivers/iio/adc/stmpe-adc.c
> +++ b/drivers/iio/adc/stmpe-adc.c
> @@ -345,21 +345,22 @@ static int __maybe_unused stmpe_adc_resume(struct device *dev)
>
> static SIMPLE_DEV_PM_OPS(stmpe_adc_pm_ops, NULL, stmpe_adc_resume);
>
> +static const struct of_device_id stmpe_adc_ids[] = {
> + { .compatible = "st,stmpe-adc", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, stmpe_adc_ids);
> +
> static struct platform_driver stmpe_adc_driver = {
> .probe = stmpe_adc_probe,
> .driver = {
> .name = "stmpe-adc",
> .pm = &stmpe_adc_pm_ops,
> + .of_match_table = stmpe_adc_ids,
> },
> };
> module_platform_driver(stmpe_adc_driver);
>
> -static const struct of_device_id stmpe_adc_ids[] = {
> - { .compatible = "st,stmpe-adc", },
> - { },
> -};
> -MODULE_DEVICE_TABLE(of, stmpe_adc_ids);
> -
> MODULE_AUTHOR("Stefan Agner <stefan.agner@toradex.com>");
> MODULE_DESCRIPTION("STMPEXXX ADC driver");
> MODULE_LICENSE("GPL v2");
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] iio: stmpe-adc: use of_device_id for OF matching
@ 2022-05-01 18:00 ` Jonathan Cameron
0 siblings, 0 replies; 6+ messages in thread
From: Jonathan Cameron @ 2022-05-01 18:00 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Lars-Peter Clausen, Maxime Coquelin, Alexandre Torgue, linux-iio,
linux-stm32, linux-arm-kernel, linux-kernel
On Sun, 1 May 2022 12:34:46 +0200
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
> The of_device_id was added to allow module autoloading, but it should be
> also used to allow driver matching via Devicetree.
>
> This also fixes W=1 warning:
> drivers/iio/adc/stmpe-adc.c:357:34: error: ‘stmpe_adc_ids’ defined but not used [-Werror=unused-const-variable=]
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Series applied to the togreg branch of iio.git and pushed out as testing for 0-day
to poke at it.
Thanks,
Jonathan
> ---
> drivers/iio/adc/stmpe-adc.c | 13 +++++++------
> 1 file changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c
> index d2d405388499..0208789fc0f5 100644
> --- a/drivers/iio/adc/stmpe-adc.c
> +++ b/drivers/iio/adc/stmpe-adc.c
> @@ -345,21 +345,22 @@ static int __maybe_unused stmpe_adc_resume(struct device *dev)
>
> static SIMPLE_DEV_PM_OPS(stmpe_adc_pm_ops, NULL, stmpe_adc_resume);
>
> +static const struct of_device_id stmpe_adc_ids[] = {
> + { .compatible = "st,stmpe-adc", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, stmpe_adc_ids);
> +
> static struct platform_driver stmpe_adc_driver = {
> .probe = stmpe_adc_probe,
> .driver = {
> .name = "stmpe-adc",
> .pm = &stmpe_adc_pm_ops,
> + .of_match_table = stmpe_adc_ids,
> },
> };
> module_platform_driver(stmpe_adc_driver);
>
> -static const struct of_device_id stmpe_adc_ids[] = {
> - { .compatible = "st,stmpe-adc", },
> - { },
> -};
> -MODULE_DEVICE_TABLE(of, stmpe_adc_ids);
> -
> MODULE_AUTHOR("Stefan Agner <stefan.agner@toradex.com>");
> MODULE_DESCRIPTION("STMPEXXX ADC driver");
> MODULE_LICENSE("GPL v2");
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-05-01 17:53 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-01 10:34 [PATCH 1/2] iio: stmpe-adc: use of_device_id for OF matching Krzysztof Kozlowski
2022-05-01 10:34 ` Krzysztof Kozlowski
2022-05-01 10:34 ` [PATCH 2/2] iio: ti-ads8688: " Krzysztof Kozlowski
2022-05-01 10:34 ` Krzysztof Kozlowski
2022-05-01 18:00 ` [PATCH 1/2] iio: stmpe-adc: " Jonathan Cameron
2022-05-01 18:00 ` Jonathan Cameron
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.