[PATCH net-next 5/5] net: mscc: ocelot: don't use magic numbers for OCELOT_POLICER_DISCARD

[Vladimir Oltean <vladimir.oltean@nxp.com>]

OCELOT_POLICER_DISCARD helps "kill dropped packets dead" since a
PERMIT/DENY mask mode with a port mask of 0 isn't enough to stop the CPU
port from receiving packets removed from the forwarding path.

The hardcoded initialization done for it in ocelot_vcap_init() is
confusing. All we need from it is to have a rate and a burst size of 0.

Reuse qos_policer_conf_set() for that purpose.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 drivers/net/ethernet/mscc/ocelot_vcap.c | 18 +++++++-----------
 1 file changed, 7 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/mscc/ocelot_vcap.c b/drivers/net/ethernet/mscc/ocelot_vcap.c
index 30e25d45f08d..40afab2c076a 100644
--- a/drivers/net/ethernet/mscc/ocelot_vcap.c
+++ b/drivers/net/ethernet/mscc/ocelot_vcap.c
@@ -1403,22 +1403,18 @@ static void ocelot_vcap_detect_constants(struct ocelot *ocelot,
 
 int ocelot_vcap_init(struct ocelot *ocelot)
 {
-	int i;
+	struct qos_policer_conf cpu_drop = {
+		.mode = MSCC_QOS_RATE_MODE_DATA,
+	};
+	int ret, i;
 
 	/* Create a policer that will drop the frames for the cpu.
 	 * This policer will be used as action in the acl rules to drop
 	 * frames.
 	 */
-	ocelot_write_gix(ocelot, 0x299, ANA_POL_MODE_CFG,
-			 OCELOT_POLICER_DISCARD);
-	ocelot_write_gix(ocelot, 0x1, ANA_POL_PIR_CFG,
-			 OCELOT_POLICER_DISCARD);
-	ocelot_write_gix(ocelot, 0x3fffff, ANA_POL_PIR_STATE,
-			 OCELOT_POLICER_DISCARD);
-	ocelot_write_gix(ocelot, 0x0, ANA_POL_CIR_CFG,
-			 OCELOT_POLICER_DISCARD);
-	ocelot_write_gix(ocelot, 0x3fffff, ANA_POL_CIR_STATE,
-			 OCELOT_POLICER_DISCARD);
+	ret = qos_policer_conf_set(ocelot, OCELOT_POLICER_DISCARD, &cpu_drop);
+	if (ret)
+		return ret;
 
 	for (i = 0; i < OCELOT_NUM_VCAP_BLOCKS; i++) {
 		struct ocelot_vcap_block *block = &ocelot->block[i];
-- 
2.25.1