All of lore.kernel.org
 help / color / mirror / Atom feed
From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
To: "Gustavo Pimentel" <gustavo.pimentel@synopsys.com>,
	"Vinod Koul" <vkoul@kernel.org>,
	"Jingoo Han" <jingoohan1@gmail.com>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Frank Li" <Frank.Li@nxp.com>,
	"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>,
	Serge Semin <fancer.lancer@gmail.com>,
	Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>,
	Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>,
	<linux-pci@vger.kernel.org>, <dmaengine@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v2 26/26] PCI: dwc: Add DW eDMA engine support
Date: Wed, 4 May 2022 01:51:04 +0300	[thread overview]
Message-ID: <20220503225104.12108-27-Sergey.Semin@baikalelectronics.ru> (raw)
In-Reply-To: <20220503225104.12108-1-Sergey.Semin@baikalelectronics.ru>

Since the DW eDMA driver now supports eDMA controllers embedded into the
locally accessible DW PCIe Root Ports and End-points, we can use the
updated interface to register DW eDMA as DMA engine device if it's
available. In order to successfully do that the DW PCIe core driver need
to perform some preparations first. First of all it needs to find out the
eDMA controller CSRs base address, whether they are accessible over the
Port Logic or iATU unrolled space. Afterwards it can try to auto-detect
the eDMA controller availability and number of it's read/write channels.
If none was found the procedure will just silently halt with no error
returned. Secondly the platform is supposed to provide either combined or
per-channel IRQ signals. If no valid IRQs set is found the procedure will
also halt with no error returned so to be backward compatible with
platforms where DW PCIe controllers have eDMA embedded but lack of the
IRQs defined for them. Finally before actually probing the eDMA device we
need to allocate LLP items buffers. After that the DW eDMA can be
registered. If registration is successful the info-message regarding the
number of detected Read/Write eDMA channels will be printed to the system
log in the same way as it's done for iATU settings.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>

---

Changelog v2:
- Don't fail eDMA detection procedure if the DW eDMA driver couldn't probe
  device. That happens if the driver is disabled. (@Manivannan)
- Add "dma" registers resource mapping procedure. (@Manivannan)
- Move the eDMA CSRs space detection into the dw_pcie_map_detect() method.
- Remove eDMA on the dw_pcie_ep_init() internal errors. (@Manivannan)
- Remove eDMA in the dw_pcie_ep_exit() method.
- Move the dw_pcie_edma_detect() method execution to the tail of the
  dw_pcie_ep_init() function.
---
 .../pci/controller/dwc/pcie-designware-ep.c   |  12 +-
 .../pci/controller/dwc/pcie-designware-host.c |  13 +-
 drivers/pci/controller/dwc/pcie-designware.c  | 187 ++++++++++++++++++
 drivers/pci/controller/dwc/pcie-designware.h  |  20 ++
 4 files changed, 229 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 6cfcfa34e587..a3f3fa15ebe5 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -610,8 +610,11 @@ int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
 
 void dw_pcie_ep_exit(struct dw_pcie_ep *ep)
 {
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
 	struct pci_epc *epc = ep->epc;
 
+	dw_pcie_edma_remove(pci);
+
 	pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem,
 			      epc->mem->window.page_size);
 
@@ -791,6 +794,10 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
 		goto err_exit_epc_mem;
 	}
 
+	ret = dw_pcie_edma_detect(pci);
+	if (ret)
+		goto err_free_epc_mem;
+
 	if (ep->ops->get_features) {
 		epc_features = ep->ops->get_features(ep);
 		if (epc_features->core_init_notifier)
@@ -799,10 +806,13 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
 
 	ret = dw_pcie_ep_init_complete(ep);
 	if (ret)
-		goto err_free_epc_mem;
+		goto err_remove_edma;
 
 	return 0;
 
+err_remove_edma:
+	dw_pcie_edma_remove(pci);
+
 err_free_epc_mem:
 	pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem,
 			      epc->mem->window.page_size);
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 3cd5b096a427..0ffef8526d54 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -415,14 +415,18 @@ int dw_pcie_host_init(struct pcie_port *pp)
 
 	dw_pcie_iatu_detect(pci);
 
-	ret = dw_pcie_setup_rc(pp);
+	ret = dw_pcie_edma_detect(pci);
 	if (ret)
 		goto err_free_msi;
 
+	ret = dw_pcie_setup_rc(pp);
+	if (ret)
+		goto err_remove_edma;
+
 	if (!dw_pcie_link_up(pci) && pci->ops && pci->ops->start_link) {
 		ret = pci->ops->start_link(pci);
 		if (ret)
-			goto err_free_msi;
+			goto err_remove_edma;
 	}
 
 	/* Ignore errors, the link may come up later */
@@ -440,6 +444,9 @@ int dw_pcie_host_init(struct pcie_port *pp)
 	if (pci->ops && pci->ops->stop_link)
 		pci->ops->stop_link(pci);
 
+err_remove_edma:
+	dw_pcie_edma_remove(pci);
+
 err_free_msi:
 	if (pp->has_msi_ctrl)
 		dw_pcie_free_msi(pp);
@@ -462,6 +469,8 @@ void dw_pcie_host_deinit(struct pcie_port *pp)
 	if (pci->ops && pci->ops->stop_link)
 		pci->ops->stop_link(pci);
 
+	dw_pcie_edma_remove(pci);
+
 	if (pp->has_msi_ctrl)
 		dw_pcie_free_msi(pp);
 
diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 68bd3fc66fd7..aae8b03757f5 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -11,6 +11,7 @@
 #include <linux/align.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>
+#include <linux/dma/edma.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/sizes.h>
@@ -595,6 +596,8 @@ int dw_pcie_map_detect(struct dw_pcie *pci)
 		pci->atu_base = pci->dbi_base + PCIE_ATU_VIEWPORT_BASE;
 		pci->atu_size = PCIE_ATU_VIEWPORT_SIZE;
 
+	        pci->edma.reg_base = pci->dbi_base + PCIE_DMA_VIEWPORT_BASE;
+
 		dev_info(pci->dev, "iATU/DMA unroll: disabled\n");
 
 		return 0;
@@ -617,6 +620,17 @@ int dw_pcie_map_detect(struct dw_pcie *pci)
 	if (!pci->atu_size)
 		pci->atu_size = SZ_4K;
 
+	if (!pci->edma.reg_base) {
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dma");
+		if (res) {
+			pci->edma.reg_base = devm_ioremap_resource(pci->dev, res);
+			if (IS_ERR(pci->edma.reg_base))
+				return PTR_ERR(pci->edma.reg_base);
+		} else if (pci->atu_size >= 2 * DEFAULT_DBI_DMA_OFFSET) {
+			pci->edma.reg_base = pci->atu_base + DEFAULT_DBI_DMA_OFFSET;
+		}
+	}
+
 	dev_info(pci->dev, "iATU/DMA unroll: enabled\n");
 
 	return 0;
@@ -678,6 +692,179 @@ void dw_pcie_iatu_detect(struct dw_pcie *pci)
 		 pci->region_align / SZ_1K, (pci->region_limit + 1) / SZ_1G);
 }
 
+static u32 dw_pcie_readl_dma(struct dw_pcie *pci, u32 reg)
+{
+	u32 val = 0;
+	int ret;
+
+	if (pci->ops && pci->ops->read_dbi)
+		return pci->ops->read_dbi(pci, pci->edma.reg_base, reg, 4);
+
+	ret = dw_pcie_read(pci->edma.reg_base + reg, 4, &val);
+	if (ret)
+		dev_err(pci->dev, "Read DMA address failed\n");
+
+	return val;
+}
+
+static int dw_pcie_edma_irq_vector(struct device *dev, unsigned int nr)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	char name[6];
+	int ret;
+
+	if (nr >= EDMA_MAX_WR_CH + EDMA_MAX_RD_CH)
+		return -EINVAL;
+
+	ret = platform_get_irq_byname_optional(pdev, "dma");
+	if (ret > 0)
+		return ret;
+
+	snprintf(name, sizeof(name), "dma%u", nr);
+
+	return platform_get_irq_byname_optional(pdev, name);
+}
+
+static struct dw_edma_core_ops dw_pcie_edma_ops = {
+	.irq_vector = dw_pcie_edma_irq_vector,
+};
+
+static int dw_pcie_edma_detect_channels(struct dw_pcie *pci)
+{
+	u32 val;
+
+	val = dw_pcie_readl_dma(pci, PCIE_DMA_CTRL);
+	if (!val || val == 0xffffffff)
+		return 0;
+
+	pci->edma.ll_wr_cnt = FIELD_GET(PCIE_DMA_NUM_WR_CHAN, val);
+	pci->edma.ll_rd_cnt = FIELD_GET(PCIE_DMA_NUM_RD_CHAN, val);
+
+	if (pci->edma.ll_wr_cnt > EDMA_MAX_WR_CH ||
+	    pci->edma.ll_rd_cnt > EDMA_MAX_RD_CH)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int dw_pcie_edma_irq_verify(struct dw_pcie *pci)
+{
+	struct platform_device *pdev = to_platform_device(pci->dev);
+	u16 ch_cnt = pci->edma.ll_wr_cnt + pci->edma.ll_rd_cnt;
+	char name[6];
+	int ret;
+
+	if (pci->edma.nr_irqs == 1)
+		return 0;
+	else if (pci->edma.nr_irqs > 1)
+		return pci->edma.nr_irqs != ch_cnt ? -EINVAL : 0;
+
+	ret = platform_get_irq_byname_optional(pdev, "dma");
+	if (ret > 0) {
+		pci->edma.nr_irqs = 1;
+		return 0;
+	}
+
+	for (; pci->edma.nr_irqs < ch_cnt; pci->edma.nr_irqs++) {
+		snprintf(name, sizeof(name), "dma%d", pci->edma.nr_irqs);
+
+		ret = platform_get_irq_byname_optional(pdev, name);
+		if (ret <= 0)
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int dw_pcie_edma_ll_alloc(struct dw_pcie *pci)
+{
+	struct dw_edma_region *ll;
+	dma_addr_t paddr;
+	int i;
+
+	for (i = 0; i < pci->edma.ll_wr_cnt; i++) {
+		ll = &pci->edma.ll_region_wr[i];
+		ll->sz = DMA_LLP_MEM_SIZE;
+		ll->vaddr = dmam_alloc_coherent(pci->dev, ll->sz,
+						&paddr, GFP_KERNEL);
+		if (!ll->vaddr)
+			return -ENOMEM;
+
+		ll->paddr = paddr;
+	}
+
+	for (i = 0; i < pci->edma.ll_rd_cnt; i++) {
+		ll = &pci->edma.ll_region_rd[i];
+		ll->sz = DMA_LLP_MEM_SIZE;
+		ll->vaddr = dmam_alloc_coherent(pci->dev, ll->sz,
+						&paddr, GFP_KERNEL);
+		if (!ll->vaddr)
+			return -ENOMEM;
+
+		ll->paddr = paddr;
+	}
+
+	return 0;
+}
+
+int dw_pcie_edma_detect(struct dw_pcie *pci)
+{
+	int ret;
+
+	if (!pci->edma.reg_base)
+		return 0;
+
+	pci->edma.dev = pci->dev;
+	if (!pci->edma.ops)
+		pci->edma.ops = &dw_pcie_edma_ops;
+	pci->edma.flags |= DW_EDMA_CHIP_LOCAL;
+
+	if (pci->iatu_dma_unrolled)
+		pci->edma.mf = EDMA_MF_EDMA_UNROLL;
+	else
+		pci->edma.mf = EDMA_MF_EDMA_LEGACY;
+
+	ret = dw_pcie_edma_detect_channels(pci);
+	if (ret) {
+		dev_err(pci->dev, "Unexpected NoF eDMA channels found\n");
+		return ret;
+	}
+
+	/* Skip any further initialization if no eDMA found */
+	if (!pci->edma.ll_wr_cnt && !pci->edma.ll_rd_cnt)
+		return 0;
+
+	/* Don't fail on the IRQs verification for the backward compatibility */
+	ret = dw_pcie_edma_irq_verify(pci);
+	if (ret) {
+		dev_err(pci->dev, "Invalid eDMA IRQs found\n");
+		return 0;
+	}
+
+	ret = dw_pcie_edma_ll_alloc(pci);
+	if (ret) {
+		dev_err(pci->dev, "Couldn't allocate LLP memory\n");
+		return ret;
+	}
+
+	/* Don't fail if the DW eDMA driver can't find the device */
+	ret = dw_edma_probe(&pci->edma);
+	if (ret && ret != -ENODEV) {
+		dev_err(pci->dev, "Couldn't register eDMA device\n");
+		return ret;
+	}
+
+	dev_info(pci->dev, "eDMA channels: %hu wr, %hu rd\n",
+		 pci->edma.ll_wr_cnt, pci->edma.ll_rd_cnt);
+
+	return 0;
+}
+
+void dw_pcie_edma_remove(struct dw_pcie *pci)
+{
+	dw_edma_remove(&pci->edma);
+}
+
 void dw_pcie_setup(struct dw_pcie *pci)
 {
 	u32 val;
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index e10647b96c68..87add1920f0d 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -13,6 +13,7 @@
 
 #include <linux/bitfield.h>
 #include <linux/dma-mapping.h>
+#include <linux/dma/edma.h>
 #include <linux/irq.h>
 #include <linux/msi.h>
 #include <linux/pci.h>
@@ -145,6 +146,18 @@
 #define PCIE_MSIX_DOORBELL		0x948
 #define PCIE_MSIX_DOORBELL_PF_SHIFT	24
 
+/*
+ * eDMA CSRs. DW PCIe IP-core v4.70a and older had the eDMA registers accessible
+ * over the Port Logic registers space. Afterwords the unrolled mapping was
+ * introduced so eDMA and iATU could be accessed via a dedicated registers
+ * space.
+ */
+#define PCIE_DMA_VIEWPORT_BASE		0x970
+#define PCIE_DMA_UNROLL_BASE		0x80000
+#define PCIE_DMA_CTRL			0x008
+#define PCIE_DMA_NUM_WR_CHAN		GENMASK(3, 0)
+#define PCIE_DMA_NUM_RD_CHAN		GENMASK(19, 16)
+
 #define PCIE_PL_CHK_REG_CONTROL_STATUS			0xB20
 #define PCIE_PL_CHK_REG_CHK_REG_START			BIT(0)
 #define PCIE_PL_CHK_REG_CHK_REG_CONTINUOUS		BIT(1)
@@ -161,6 +174,7 @@
  * this offset, if atu_base not set.
  */
 #define DEFAULT_DBI_ATU_OFFSET (0x3 << 20)
+#define DEFAULT_DBI_DMA_OFFSET (0x1 << 19)
 
 #define MAX_MSI_IRQS			256
 #define MAX_MSI_IRQS_PER_CTRL		32
@@ -172,6 +186,9 @@
 #define MAX_IATU_IN			256
 #define MAX_IATU_OUT			256
 
+/* Default eDMA LLP memory size */
+#define DMA_LLP_MEM_SIZE		PAGE_SIZE
+
 struct pcie_port;
 struct dw_pcie;
 struct dw_pcie_ep;
@@ -310,6 +327,7 @@ struct dw_pcie {
 	int			num_lanes;
 	int			link_gen;
 	u8			n_fts[2];
+	struct dw_edma_chip	edma;
 	bool			iatu_dma_unrolled: 1;
 	bool			io_cfg_atu_shared: 1;
 };
@@ -345,6 +363,8 @@ void dw_pcie_disable_atu(struct dw_pcie *pci, u32 dir, int index);
 void dw_pcie_setup(struct dw_pcie *pci);
 int dw_pcie_map_detect(struct dw_pcie *pci);
 void dw_pcie_iatu_detect(struct dw_pcie *pci);
+int dw_pcie_edma_detect(struct dw_pcie *pci);
+void dw_pcie_edma_remove(struct dw_pcie *pci);
 
 static inline void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val)
 {
-- 
2.35.1


  parent reply	other threads:[~2022-05-03 23:01 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-03 22:50 [PATCH v2 00/26] dmaengine: dw-edma: Add RP/EP local DMA controllers support Serge Semin
2022-05-03 22:50 ` [PATCH v2 01/26] dma-direct: take dma-ranges/offsets into account in resource mapping Serge Semin
2022-05-03 22:50   ` Serge Semin
2022-05-09  6:15   ` Christoph Hellwig
2022-05-09  6:15     ` Christoph Hellwig
2022-05-12 23:28     ` Serge Semin
2022-05-12 23:28       ` Serge Semin
2022-05-03 22:50 ` [PATCH v2 02/26] dmaengine: Fix dma_slave_config.dst_addr description Serge Semin
2022-05-12 14:18   ` Manivannan Sadhasivam
2022-05-03 22:50 ` [PATCH v2 03/26] dmaengine: dw-edma: Release requested IRQs on failure Serge Semin
2022-05-12 14:39   ` Manivannan Sadhasivam
2022-05-03 22:50 ` [PATCH v2 04/26] dmaengine: dw-edma: Convert ll/dt phys-address to PCIe bus/DMA address Serge Semin
2022-05-03 22:50 ` [PATCH v2 05/26] dmaengine: dw-edma: Fix missing src/dst address of the interleaved xfers Serge Semin
2022-05-03 22:50 ` [PATCH v2 06/26] dmaengine: dw-edma: Don't permit non-inc " Serge Semin
2022-05-12 14:41   ` Manivannan Sadhasivam
2022-05-03 22:50 ` [PATCH v2 07/26] dmaengine: dw-edma: Fix invalid interleaved xfers semantics Serge Semin
2022-05-12 15:16   ` Manivannan Sadhasivam
2022-05-03 22:50 ` [PATCH v2 08/26] dmaengine: dw-edma: Add CPU to PCIe bus address translation Serge Semin
2022-05-03 22:50 ` [PATCH v2 09/26] dmaengine: dw-edma: Add PCIe bus address getter to the remote EP glue-driver Serge Semin
2022-05-03 22:50 ` [PATCH v2 10/26] dmaengine: dw-edma: Drop chancnt initialization Serge Semin
2022-05-03 22:50 ` [PATCH v2 11/26] dmaengine: dw-edma: Fix DebugFS reg entry type Serge Semin
2022-05-03 22:50 ` [PATCH v2 12/26] dmaengine: dw-edma: Stop checking debugfs_create_*() return value Serge Semin
2022-05-03 22:50 ` [PATCH v2 13/26] dmaengine: dw-edma: Add dw_edma prefix to the DebugFS nodes descriptor Serge Semin
2022-05-03 22:50 ` [PATCH v2 14/26] dmaengine: dw-edma: Convert DebugFS descs to being kz-allocated Serge Semin
2022-05-12 15:17   ` Manivannan Sadhasivam
2022-05-03 22:50 ` [PATCH v2 15/26] dmaengine: dw-edma: Rename DebugFS dentry variables to 'dent' Serge Semin
2022-05-12 15:19   ` Manivannan Sadhasivam
2022-05-03 22:50 ` [PATCH v2 16/26] dmaengine: dw-edma: Simplify the DebugFS context CSRs init procedure Serge Semin
2022-05-12 15:20   ` Manivannan Sadhasivam
2022-05-03 22:50 ` [PATCH v2 17/26] dmaengine: dw-edma: Move eDMA data pointer to DebugFS node descriptor Serge Semin
2022-05-03 22:50 ` [PATCH v2 18/26] dmaengine: dw-edma: Join Write/Read channels into a single device Serge Semin
2022-05-03 22:50 ` [PATCH v2 19/26] dmaengine: dw-edma: Use DMA-engine device DebugFS subdirectory Serge Semin
2022-05-03 22:50 ` [PATCH v2 20/26] dmaengine: dw-edma: Use non-atomic io-64 methods Serge Semin
2022-05-12 15:21   ` Manivannan Sadhasivam
2022-05-03 22:50 ` [PATCH v2 21/26] dmaengine: dw-edma: Drop DT-region allocation Serge Semin
2022-05-03 22:51 ` [PATCH v2 22/26] dmaengine: dw-edma: Replace chip ID number with device name Serge Semin
2022-05-03 22:51 ` [PATCH v2 23/26] dmaengine: dw-edma: Bypass dma-ranges mapping for the local setup Serge Semin
2022-05-24 13:19   ` Manivannan Sadhasivam
2022-05-25  8:56     ` Serge Semin
2022-05-03 22:51 ` [PATCH v2 24/26] dmaengine: dw-edma: Skip cleanup procedure if no private data found Serge Semin
2022-05-12 15:23   ` Manivannan Sadhasivam
2022-05-12 17:38     ` Serge Semin
2022-05-03 22:51 ` [PATCH v2 25/26] PCI: dwc: Add generic iATU/eDMA CSRs space detection method Serge Semin
2022-05-03 22:51 ` Serge Semin [this message]
2022-05-12 14:11 ` [PATCH v2 00/26] dmaengine: dw-edma: Add RP/EP local DMA controllers support Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220503225104.12108-27-Sergey.Semin@baikalelectronics.ru \
    --to=sergey.semin@baikalelectronics.ru \
    --cc=Alexey.Malahov@baikalelectronics.ru \
    --cc=Frank.Li@nxp.com \
    --cc=Pavel.Parkhomenko@baikalelectronics.ru \
    --cc=bhelgaas@google.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=fancer.lancer@gmail.com \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jingoohan1@gmail.com \
    --cc=kw@linux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=robh@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.