All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Scally <djrscally@gmail.com>
To: linux-media@vger.kernel.org
Cc: yong.zhi@intel.com, sakari.ailus@linux.intel.com,
	bingbu.cao@intel.com, tian.shu.qiu@intel.com,
	andriy.shevchenko@linux.intel.com, hverkuil-cisco@xs4all.nl
Subject: [PATCH v3 11/15] media: ipu3-cio2: Add INT347E to cio2-bridge
Date: Wed,  4 May 2022 23:30:23 +0100	[thread overview]
Message-ID: <20220504223027.3480287-12-djrscally@gmail.com> (raw)
In-Reply-To: <20220504223027.3480287-1-djrscally@gmail.com>

The OVTI7251 sensor can be found on x86 laptops with an IPU3, and so
needs to be supported by the cio2-bridge. Add it to the table of
supported sensors.

Signed-off-by: Daniel Scally <djrscally@gmail.com>
---
Changes in v3:

	- None

Changes in v2:

	- Switched to 319.2MHz link frequency

 drivers/media/pci/intel/ipu3/cio2-bridge.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/pci/intel/ipu3/cio2-bridge.c b/drivers/media/pci/intel/ipu3/cio2-bridge.c
index 7ccb7b6eaa82..df6c94da2f6a 100644
--- a/drivers/media/pci/intel/ipu3/cio2-bridge.c
+++ b/drivers/media/pci/intel/ipu3/cio2-bridge.c
@@ -25,6 +25,8 @@ static const struct cio2_sensor_config cio2_supported_sensors[] = {
 	CIO2_SENSOR_CONFIG("INT33BE", 1, 419200000),
 	/* Omnivision OV8865 */
 	CIO2_SENSOR_CONFIG("INT347A", 1, 360000000),
+	/* Omnivision OV7251 */
+	CIO2_SENSOR_CONFIG("INT347E", 1, 319200000),
 	/* Omnivision OV2680 */
 	CIO2_SENSOR_CONFIG("OVTI2680", 0),
 };
-- 
2.25.1


  parent reply	other threads:[~2022-05-04 22:31 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-04 22:30 [PATCH v3 00/15] Support OVTI7251 on Microsoft Surface line Daniel Scally
2022-05-04 22:30 ` [PATCH v3 01/15] media: uapi: Add IPU3 packed Y10 format Daniel Scally
2022-05-04 22:30 ` [PATCH v3 02/15] media: ipu3-cio2: Add support for V4L2_PIX_FMT_IPU3_Y10 Daniel Scally
2022-05-04 22:30 ` [PATCH v3 03/15] media: i2c: Add acpi support to ov7251 Daniel Scally
2022-05-04 22:30 ` [PATCH v3 04/15] media: i2c: Provide ov7251_check_hwcfg() Daniel Scally
2022-05-05 10:16   ` Andy Shevchenko
2022-05-05 10:41     ` Daniel Scally
2022-05-04 22:30 ` [PATCH v3 05/15] media: i2c: Remove per-mode frequencies from ov7251 Daniel Scally
2022-05-04 22:30 ` [PATCH v3 06/15] media: i2c: Add ov7251_pll_configure() Daniel Scally
2022-05-04 22:30 ` [PATCH v3 07/15] media: i2c: Add support for new frequencies to ov7251 Daniel Scally
2022-05-05 12:49   ` kernel test robot
2022-05-04 22:30 ` [PATCH v3 08/15] media: i2c: Add ov7251_detect_chip() Daniel Scally
2022-05-04 22:30 ` [PATCH v3 09/15] media: i2c: Add pm_runtime support to ov7251 Daniel Scally
2022-05-04 22:30 ` [PATCH v3 10/15] media: i2c: Remove .s_power() from ov7251 Daniel Scally
2022-05-04 22:30 ` Daniel Scally [this message]
2022-05-04 22:30 ` [PATCH v3 12/15] media: i2c: Extend .get_selection() for ov7251 Daniel Scally
2022-05-04 22:30 ` [PATCH v3 13/15] media: i2c: add ov7251_init_ctrls() Daniel Scally
2022-05-04 22:30 ` [PATCH v3 14/15] media: i2c: Add hblank control to ov7251 Daniel Scally
2022-05-04 22:30 ` [PATCH v3 15/15] media: i2c: Add vblank control to ov7251 driver Daniel Scally
2022-05-05  1:02   ` kernel test robot
2022-05-05  8:04     ` Daniel Scally
2022-05-05  8:04       ` Daniel Scally
2022-05-05  8:32       ` Sakari Ailus
2022-05-05  8:32         ` Sakari Ailus
2022-05-05  9:10         ` Daniel Scally
2022-05-05  9:10           ` Daniel Scally
2022-05-05 10:31   ` Andy Shevchenko
2022-05-05 22:04     ` Daniel Scally
2022-05-06 21:22       ` Andy Shevchenko
2022-05-05 17:11   ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220504223027.3480287-12-djrscally@gmail.com \
    --to=djrscally@gmail.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=bingbu.cao@intel.com \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=linux-media@vger.kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tian.shu.qiu@intel.com \
    --cc=yong.zhi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.