All of lore.kernel.org
 help / color / mirror / Atom feed
From: Robert Marko <robimarko@gmail.com>
To: bjorn.andersson@linaro.org, agross@kernel.org,
	mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, tdas@codeaurora.org,
	absahu@codeaurora.org, linux-arm-msm@vger.kernel.org,
	linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Robert Marko <robimarko@gmail.com>
Subject: [PATCH v2 06/11] clk: qcom: ipq8074: set BRANCH_HALT_DELAY flag for UBI clocks
Date: Sat,  7 May 2022 22:29:43 +0200	[thread overview]
Message-ID: <20220507202948.397271-6-robimarko@gmail.com> (raw)
In-Reply-To: <20220507202948.397271-1-robimarko@gmail.com>

Currently, attempting to enable the UBI clocks will cause the stuck at
off warning to be printed and clk_enable will fail.

[   14.936694] gcc_ubi1_ahb_clk status stuck at 'off'

Downstream 5.4 QCA kernel has fixed this by seting the BRANCH_HALT_DELAY
flag on UBI clocks, so lets do the same.

Fixes: 5736294aef83 ("clk: qcom: ipq8074: add NSS clocks")
Signed-off-by: Robert Marko <robimarko@gmail.com>
---
 drivers/clk/qcom/gcc-ipq8074.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/clk/qcom/gcc-ipq8074.c b/drivers/clk/qcom/gcc-ipq8074.c
index c964e43ba68a..85076c1383c7 100644
--- a/drivers/clk/qcom/gcc-ipq8074.c
+++ b/drivers/clk/qcom/gcc-ipq8074.c
@@ -3372,6 +3372,7 @@ static struct clk_branch gcc_nssnoc_ubi1_ahb_clk = {
 
 static struct clk_branch gcc_ubi0_ahb_clk = {
 	.halt_reg = 0x6820c,
+	.halt_check = BRANCH_HALT_DELAY,
 	.clkr = {
 		.enable_reg = 0x6820c,
 		.enable_mask = BIT(0),
@@ -3389,6 +3390,7 @@ static struct clk_branch gcc_ubi0_ahb_clk = {
 
 static struct clk_branch gcc_ubi0_axi_clk = {
 	.halt_reg = 0x68200,
+	.halt_check = BRANCH_HALT_DELAY,
 	.clkr = {
 		.enable_reg = 0x68200,
 		.enable_mask = BIT(0),
@@ -3406,6 +3408,7 @@ static struct clk_branch gcc_ubi0_axi_clk = {
 
 static struct clk_branch gcc_ubi0_nc_axi_clk = {
 	.halt_reg = 0x68204,
+	.halt_check = BRANCH_HALT_DELAY,
 	.clkr = {
 		.enable_reg = 0x68204,
 		.enable_mask = BIT(0),
@@ -3423,6 +3426,7 @@ static struct clk_branch gcc_ubi0_nc_axi_clk = {
 
 static struct clk_branch gcc_ubi0_core_clk = {
 	.halt_reg = 0x68210,
+	.halt_check = BRANCH_HALT_DELAY,
 	.clkr = {
 		.enable_reg = 0x68210,
 		.enable_mask = BIT(0),
@@ -3440,6 +3444,7 @@ static struct clk_branch gcc_ubi0_core_clk = {
 
 static struct clk_branch gcc_ubi0_mpt_clk = {
 	.halt_reg = 0x68208,
+	.halt_check = BRANCH_HALT_DELAY,
 	.clkr = {
 		.enable_reg = 0x68208,
 		.enable_mask = BIT(0),
@@ -3457,6 +3462,7 @@ static struct clk_branch gcc_ubi0_mpt_clk = {
 
 static struct clk_branch gcc_ubi1_ahb_clk = {
 	.halt_reg = 0x6822c,
+	.halt_check = BRANCH_HALT_DELAY,
 	.clkr = {
 		.enable_reg = 0x6822c,
 		.enable_mask = BIT(0),
@@ -3474,6 +3480,7 @@ static struct clk_branch gcc_ubi1_ahb_clk = {
 
 static struct clk_branch gcc_ubi1_axi_clk = {
 	.halt_reg = 0x68220,
+	.halt_check = BRANCH_HALT_DELAY,
 	.clkr = {
 		.enable_reg = 0x68220,
 		.enable_mask = BIT(0),
@@ -3491,6 +3498,7 @@ static struct clk_branch gcc_ubi1_axi_clk = {
 
 static struct clk_branch gcc_ubi1_nc_axi_clk = {
 	.halt_reg = 0x68224,
+	.halt_check = BRANCH_HALT_DELAY,
 	.clkr = {
 		.enable_reg = 0x68224,
 		.enable_mask = BIT(0),
@@ -3508,6 +3516,7 @@ static struct clk_branch gcc_ubi1_nc_axi_clk = {
 
 static struct clk_branch gcc_ubi1_core_clk = {
 	.halt_reg = 0x68230,
+	.halt_check = BRANCH_HALT_DELAY,
 	.clkr = {
 		.enable_reg = 0x68230,
 		.enable_mask = BIT(0),
@@ -3525,6 +3534,7 @@ static struct clk_branch gcc_ubi1_core_clk = {
 
 static struct clk_branch gcc_ubi1_mpt_clk = {
 	.halt_reg = 0x68228,
+	.halt_check = BRANCH_HALT_DELAY,
 	.clkr = {
 		.enable_reg = 0x68228,
 		.enable_mask = BIT(0),
-- 
2.35.1


  parent reply	other threads:[~2022-05-07 20:30 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-07 20:29 [PATCH v2 01/11] clk: qcom: ipq8074: fix NSS core PLL-s Robert Marko
2022-05-07 20:29 ` [PATCH v2 02/11] clk: qcom: ipq8074: SW workaround for UBI32 PLL lock Robert Marko
2022-05-07 20:29 ` [PATCH v2 03/11] clk: qcom: ipq8074: fix NSS port frequency tables Robert Marko
2022-05-07 20:29 ` [PATCH v2 04/11] clk: qcom: ipq8074: add PPE crypto clock Robert Marko
2022-05-08  1:30   ` kernel test robot
2022-05-07 20:29 ` [PATCH v2 05/11] dt-bindings: clock: " Robert Marko
2022-05-07 20:29 ` Robert Marko [this message]
2022-05-07 20:29 ` [PATCH v2 07/11] dt-bindings: clocks: qcom,gcc-ipq8074: support power domains Robert Marko
2022-05-09  7:20   ` Krzysztof Kozlowski
2022-05-07 20:29 ` [PATCH v2 08/11] dt-bindings: clock: qcom: ipq8074: add USB GDSCs Robert Marko
2022-05-09  7:15   ` Krzysztof Kozlowski
2022-05-07 20:29 ` [PATCH v2 09/11] clk: " Robert Marko
2022-05-07 20:29 ` [PATCH v2 10/11] clk: qcom: ipq8074: dont disable gcc_sleep_clk_src Robert Marko
2022-05-07 20:29 ` [PATCH v2 11/11] arm64: dts: ipq8074: add USB power domains Robert Marko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220507202948.397271-6-robimarko@gmail.com \
    --to=robimarko@gmail.com \
    --cc=absahu@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tdas@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.