* [PATCH v5 2/5] arm64: dts: qcom: sc7180: Add mrbland dts files
2022-05-10 22:44 [PATCH v5 1/5] arm64: dts: qcom: sc7180: Add wormdingler dts files Joseph S. Barrera III
@ 2022-05-10 22:44 ` Joseph S. Barrera III
2022-05-10 22:44 ` [PATCH v5 3/5] arm64: dts: qcom: sc7180: Add quackingstick " Joseph S. Barrera III
` (3 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: Joseph S. Barrera III @ 2022-05-10 22:44 UTC (permalink / raw)
To: LKML
Cc: Douglas Anderson, Alexandru M Stan, Joseph S. Barrera III,
Andy Gross, Bjorn Andersson, Krzysztof Kozlowski, Rob Herring,
devicetree, linux-arm-msm
Mrbland is a trogdor-based board. These dts files are copies from
the downstream Chrome OS 5.4 kernel, but with downstream bits removed.
Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
Changes in v5:
- Replaced _ in node name with -
- Ordered nodes by name
- Added comment that compatible will be filled in per-board
Changes in v4:
- Added missing version history
Changes in v2:
- Word wrapped patch description.
- Removed "Author" from patch description.
- Fixed whitespace around "en_pp3300_dx_edp"
arch/arm64/boot/dts/qcom/Makefile | 4 +
.../qcom/sc7180-trogdor-mrbland-rev0-auo.dts | 22 ++
.../qcom/sc7180-trogdor-mrbland-rev0-boe.dts | 22 ++
.../dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi | 53 +++
.../qcom/sc7180-trogdor-mrbland-rev1-auo.dts | 22 ++
.../qcom/sc7180-trogdor-mrbland-rev1-boe.dts | 24 ++
.../boot/dts/qcom/sc7180-trogdor-mrbland.dtsi | 353 ++++++++++++++++++
7 files changed, 500 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index e4114e22548a..2330b5ea13bf 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -75,6 +75,10 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r9.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r4.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r5.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r9.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-auo.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-boe.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-auo.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-boe.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts
new file mode 100644
index 000000000000..2767817fb053
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Mrbland board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x0 => 0
+ * - bits 7..4: Panel ID: 0x0 (AUO)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-mrbland-rev0.dtsi"
+
+/ {
+ model = "Google Mrbland rev0 AUO panel board";
+ compatible = "google,mrbland-rev0-sku0", "qcom,sc7180";
+};
+
+&panel {
+ compatible = "auo,b101uan08.3";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts
new file mode 100644
index 000000000000..711485574a03
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Mrbland board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x10 => 16
+ * - bits 7..4: Panel ID: 0x1 (BOE)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-mrbland-rev0.dtsi"
+
+/ {
+ model = "Google Mrbland rev0 BOE panel board";
+ compatible = "google,mrbland-rev0-sku16", "qcom,sc7180";
+};
+
+&panel {
+ compatible = "boe,tv101wum-n53";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi
new file mode 100644
index 000000000000..7bc8402c018e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Mrbland board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-mrbland.dtsi"
+
+&avdd_lcd {
+ gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>;
+};
+
+&panel {
+ enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>;
+};
+
+&v1p8_mipi {
+ gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor-mrbland.dtsi */
+&avdd_lcd_en {
+ pinmux {
+ pins = "gpio80";
+ };
+
+ pinconf {
+ pins = "gpio80";
+ };
+};
+
+&mipi_1800_en {
+ pinmux {
+ pins = "gpio81";
+ };
+
+ pinconf {
+ pins = "gpio81";
+ };
+};
+&vdd_reset_1800 {
+ pinmux {
+ pins = "gpio76";
+ };
+
+ pinconf {
+ pins = "gpio76";
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts
new file mode 100644
index 000000000000..275313ef7554
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Mrbland board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x600 => 1536
+ * - bits 11..8: Panel ID: 0x6 (AUO)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-mrbland.dtsi"
+
+/ {
+ model = "Google Mrbland rev1+ AUO panel board";
+ compatible = "google,mrbland-sku1536", "qcom,sc7180";
+};
+
+&panel {
+ compatible = "auo,b101uan08.3";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts
new file mode 100644
index 000000000000..87c6b6c30b5e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Mrbland board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x300 => 768
+ * - bits 11..8: Panel ID: 0x3 (BOE)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-mrbland.dtsi"
+
+/ {
+ model = "Google Mrbland (rev1 - 2) BOE panel board";
+ /* Uses ID 768 on rev1 and 1024 on rev2+ */
+ compatible = "google,mrbland-sku1024", "google,mrbland-sku768",
+ "qcom,sc7180";
+};
+
+&panel {
+ compatible = "boe,tv101wum-n53";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi
new file mode 100644
index 000000000000..9b180d21f3fe
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Mrbland board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+
+ap_ec_spi: &spi6 {};
+ap_h1_spi: &spi0 {};
+
+#include "sc7180-trogdor.dtsi"
+
+/* This board only has 1 USB Type-C port. */
+/delete-node/ &usb_c1;
+
+/ {
+ avdd_lcd: avdd-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd_lcd";
+
+ gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&avdd_lcd_en>;
+
+ vin-supply = <&pp5000_a>;
+ };
+
+ avee_lcd: avee-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "avee_lcd";
+
+ gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&avee_lcd_en>;
+
+ vin-supply = <&pp5000_a>;
+ };
+
+ v1p8_mipi: v1p8-mipi {
+ compatible = "regulator-fixed";
+ regulator-name = "v1p8_mipi";
+
+ gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mipi_1800_en>;
+
+ vin-supply = <&pp3300_a>;
+ };
+};
+
+&ap_tp_i2c {
+ status = "disabled";
+};
+
+&backlight {
+ pwms = <&cros_ec_pwm 0>;
+};
+
+&camcc {
+ status = "okay";
+};
+
+&dsi0 {
+
+ panel: panel@0 {
+ /* Compatible will be filled in per-board */
+ reg = <0>;
+ enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vdd_reset_1800>;
+ avdd-supply = <&avdd_lcd>;
+ avee-supply = <&avee_lcd>;
+ pp1800-supply = <&v1p8_mipi>;
+ pp3300-supply = <&pp3300_dx_edp>;
+ backlight = <&backlight>;
+ rotation = <270>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&gpio_keys {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ap_ts: touchscreen@5d {
+ compatible = "goodix,gt7375p";
+ reg = <0x5d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+
+ vdd-supply = <&pp3300_ts>;
+ };
+};
+
+&pp1800_uf_cam {
+ status = "okay";
+};
+
+&pp1800_wf_cam {
+ status = "okay";
+};
+
+&pp2800_uf_cam {
+ status = "okay";
+};
+
+&pp2800_wf_cam {
+ status = "okay";
+};
+
+&wifi {
+ qcom,ath10k-calibration-variant = "GO_MRBLAND";
+};
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+pp3300_disp_on: &pp3300_dx_edp {
+ gpio = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+
+tp_en: &en_pp3300_dx_edp {
+ pinmux {
+ pins = "gpio85";
+ };
+
+ pinconf {
+ pins = "gpio85";
+ };
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "HUB_RST_L",
+ "AP_RAM_ID0",
+ "AP_SKU_ID2",
+ "AP_RAM_ID1",
+ "",
+ "AP_RAM_ID2",
+ "UF_CAM_EN",
+ "WF_CAM_EN",
+ "TS_RESET_L",
+ "TS_INT_L",
+ "",
+ "",
+ "AP_EDP_BKLTEN",
+ "UF_CAM_MCLK",
+ "WF_CAM_CLK",
+ "",
+ "",
+ "UF_CAM_SDA",
+ "UF_CAM_SCL",
+ "WF_CAM_SDA",
+ "WF_CAM_SCL",
+ "AVEE_LCD_EN",
+ "",
+ "AMP_EN",
+ "",
+ "",
+ "",
+ "",
+ "HP_IRQ",
+ "WF_CAM_RST_L",
+ "UF_CAM_RST_L",
+ "AP_BRD_ID2",
+ "",
+ "AP_BRD_ID0",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "BT_UART_CTS",
+ "BT_UART_RTS",
+ "BT_UART_TXD",
+ "BT_UART_RXD",
+ "H1_AP_INT_ODL",
+ "",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "HP_I2C_SDA",
+ "HP_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "AMP_BCLK",
+ "AMP_LRCLK",
+ "AMP_DIN",
+ "PEN_DET_ODL",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "HP_MCLK",
+ "AP_SKU_ID0",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_SPI_CLK",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_L.
+ */
+ "AP_FLASH_WP_L",
+ "",
+ "AP_SPI_CS0_L",
+ "",
+ "",
+ "",
+ "",
+ "WLAN_SW_CTRL",
+ "",
+ "REPORT_E",
+ "",
+ "ID0",
+ "",
+ "ID1",
+ "",
+ "",
+ "",
+ "CODEC_PWR_EN",
+ "HUB_EN",
+ "TP_EN",
+ "MIPI_1.8V_EN",
+ "VDD_RESET_1.8V",
+ "AVDD_LCD_EN",
+ "",
+ "AP_SKU_ID1",
+ "AP_RST_REQ",
+ "",
+ "AP_BRD_ID1",
+ "AP_EC_INT_L",
+ "SDM_GRFC_3",
+ "",
+ "",
+ "BOOT_CONFIG_4",
+ "BOOT_CONFIG_2",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "BOOT_CONFIG_3",
+ "WCI2_LTE_COEX_TXD",
+ "WCI2_LTE_COEX_RXD",
+ "",
+ "",
+ "",
+ "",
+ "FORCED_USB_BOOT_POL",
+ "AP_TS_PEN_I2C_SDA",
+ "AP_TS_PEN_I2C_SCL",
+ "DP_HOT_PLUG_DET",
+ "EC_IN_RW_ODL";
+
+ avdd_lcd_en: avdd-lcd-en {
+ pinmux {
+ pins = "gpio88";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio88";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ avee_lcd_en: avee-lcd-en {
+ pinmux {
+ pins = "gpio21";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio21";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ mipi_1800_en: mipi-1800-en {
+ pinmux {
+ pins = "gpio86";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio86";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ vdd_reset_1800: vdd-reset-1800 {
+ pinmux {
+ pins = "gpio87";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio87";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+};
--
2.31.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v5 3/5] arm64: dts: qcom: sc7180: Add quackingstick dts files
2022-05-10 22:44 [PATCH v5 1/5] arm64: dts: qcom: sc7180: Add wormdingler dts files Joseph S. Barrera III
2022-05-10 22:44 ` [PATCH v5 2/5] arm64: dts: qcom: sc7180: Add mrbland " Joseph S. Barrera III
@ 2022-05-10 22:44 ` Joseph S. Barrera III
2022-05-18 13:52 ` Doug Anderson
2022-05-10 22:44 ` [PATCH v5 4/5] arm64: dts: qcom: sc7180: Add pazquel " Joseph S. Barrera III
` (2 subsequent siblings)
4 siblings, 1 reply; 7+ messages in thread
From: Joseph S. Barrera III @ 2022-05-10 22:44 UTC (permalink / raw)
To: LKML
Cc: Douglas Anderson, Alexandru M Stan, Joseph S. Barrera III,
Andy Gross, Bjorn Andersson, Krzysztof Kozlowski, Rob Herring,
devicetree, linux-arm-msm
Quackingstick is a trogdor-based board. These dts files are copies from
the downstream Chrome OS 5.4 kernel, but with downstream bits removed.
Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
Changes in v5:
- Removed extra newline
- Added comment that compatible will be filled in per-board
Changes in v4:
- Added missing version history
Changes in v3:
- First inclusion in this series
arch/arm64/boot/dts/qcom/Makefile | 2 +
.../sc7180-trogdor-quackingstick-r0-lte.dts | 38 ++
.../qcom/sc7180-trogdor-quackingstick-r0.dts | 26 ++
.../qcom/sc7180-trogdor-quackingstick.dtsi | 324 ++++++++++++++++++
4 files changed, 390 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 2330b5ea13bf..5cfd6316768c 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -85,6 +85,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-quackingstick-r0.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-quackingstick-r0-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-boe.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-inx.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts
new file mode 100644
index 000000000000..35e8945fc56d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Quackingstick board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x600 => 1536
+ * - bits 11..8: Panel ID: 0x6 (AUO)
+ */
+
+#include "sc7180-trogdor-quackingstick-r0.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google Quackingstick (rev0+) with LTE";
+ compatible = "google,quackingstick-sku1536", "qcom,sc7180";
+};
+
+&ap_sar_sensor {
+ compatible = "semtech,sx9324";
+ semtech,ph0-pin = <3 1 3>;
+ semtech,ph1-pin = <2 1 2>;
+ semtech,ph2-pin = <3 3 1>;
+ semtech,ph3-pin = <1 3 3>;
+ semtech,ph01-resolution = <1024>;
+ semtech,ph23-resolution = <1024>;
+ semtech,startup-sensor = <1>;
+ semtech,ph01-proxraw-strength = <3>;
+ semtech,ph23-proxraw-strength = <3>;
+ semtech,avg-pos-strength = <256>;
+
+ /delete-property/ svdd-supply;
+ vdd-supply = <&pp1800_prox>;
+};
+
+&ap_sar_sensor_i2c {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts
new file mode 100644
index 000000000000..5c81e44ed4a5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Quackingstick board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x601 => 1537
+ * - bits 11..8: Panel ID: 0x6 (AUO)
+ */
+
+#include "sc7180-trogdor-quackingstick.dtsi"
+
+/ {
+ model = "Google Quackingstick (rev0+)";
+ compatible = "google,quackingstick-sku1537", "qcom,sc7180";
+};
+
+&dsi_phy {
+ qcom,phy-rescode-offset-top = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>;
+ qcom,phy-rescode-offset-bot = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>;
+ qcom,phy-drive-ldo-level = <375>;
+};
+
+&panel {
+ compatible = "auo,b101uan08.3";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
new file mode 100644
index 000000000000..d39f43757932
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Quackingstick board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+
+ap_ec_spi: &spi6 {};
+ap_h1_spi: &spi0 {};
+
+#include "sc7180-trogdor.dtsi"
+
+/ {
+ ppvar_lcd: ppvar-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "ppvar_lcd";
+
+ gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ppvar_lcd_en>;
+
+ vin-supply = <&pp5000_a>;
+ };
+
+ v1p8_disp: v1p8-disp {
+ compatible = "regulator-fixed";
+ regulator-name = "v1p8_disp";
+
+ gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pp1800_disp_on>;
+
+ vin-supply = <&pp3300_a>;
+ };
+};
+
+&ap_tp_i2c {
+ status = "disabled";
+};
+
+&backlight {
+ pwms = <&cros_ec_pwm 0>;
+};
+
+&camcc {
+ status = "okay";
+};
+
+&dsi0 {
+ panel: panel@0 {
+ /* Compatible will be filled in per-board */
+ reg = <0>;
+ enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_rst>;
+ avdd-supply = <&ppvar_lcd>;
+ pp1800-supply = <&v1p8_disp>;
+ pp3300-supply = <&pp3300_dx_edp>;
+ backlight = <&backlight>;
+ rotation = <270>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&gpio_keys {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ap_ts: touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ post-power-on-delay-ms = <20>;
+ hid-descr-addr = <0x0001>;
+
+ vdd-supply = <&pp3300_ts>;
+ };
+};
+
+&sdhc_2 {
+ status = "okay";
+};
+
+&pp1800_uf_cam {
+ status = "okay";
+};
+
+&pp1800_wf_cam {
+ status = "okay";
+};
+
+&pp2800_uf_cam {
+ status = "okay";
+};
+
+&pp2800_wf_cam {
+ status = "okay";
+};
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+pp3300_disp_on: &pp3300_dx_edp {
+ gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+
+tp_en: &en_pp3300_dx_edp {
+ pinmux {
+ pins = "gpio67";
+ };
+
+ pinconf {
+ pins = "gpio67";
+ };
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "HUB_RST_L",
+ "AP_RAM_ID0",
+ "AP_SKU_ID2",
+ "AP_RAM_ID1",
+ "",
+ "AP_RAM_ID2",
+ "UF_CAM_EN",
+ "WF_CAM_EN",
+ "TS_RESET_L",
+ "TS_INT_L",
+ "",
+ "",
+ "AP_EDP_BKLTEN",
+ "UF_CAM_MCLK",
+ "WF_CAM_CLK",
+ "EDP_BRIJ_I2C_SDA",
+ "EDP_BRIJ_I2C_SCL",
+ "UF_CAM_SDA",
+ "UF_CAM_SCL",
+ "WF_CAM_SDA",
+ "WF_CAM_SCL",
+ "",
+ "",
+ "AMP_EN",
+ "P_SENSOR_INT_L",
+ "AP_SAR_SENSOR_SDA",
+ "AP_SAR_SENSOR_SCL",
+ "",
+ "HP_IRQ",
+ "WF_CAM_RST_L",
+ "UF_CAM_RST_L",
+ "AP_BRD_ID2",
+ "",
+ "AP_BRD_ID0",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "",
+ "",
+ "",
+ "",
+ "H1_AP_INT_ODL",
+ "",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "HP_I2C_SDA",
+ "HP_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "",
+ "",
+ "AMP_DIN",
+ "PEN_DET_ODL",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "HP_MCLK",
+ "AP_SKU_ID0",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_SPI_CLK",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_L.
+ */
+ "AP_FLASH_WP_L",
+ "EN_PP3300_DX_EDP",
+ "AP_SPI_CS0_L",
+ "SD_CD_ODL",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RST",
+ "UIM2_PRESENT_L",
+ "UIM1_DATA",
+ "UIM1_CLK",
+ "UIM1_RST",
+ "",
+ "CODEC_PWR_EN",
+ "HUB_EN",
+ "",
+ "PP1800_DISP_ON",
+ "LCD_RST",
+ "PPVAR_LCD_EN",
+ "",
+ "AP_SKU_ID1",
+ "AP_RST_REQ",
+ "",
+ "AP_BRD_ID1",
+ "AP_EC_INT_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AP_TS_I2C_SDA",
+ "AP_TS_I2C_SCL",
+ "DP_HOT_PLUG_DET",
+ "EC_IN_RW_ODL";
+
+ lcd_rst: lcd-rst {
+ pinmux {
+ pins = "gpio87";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio87";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ ppvar_lcd_en: ppvar-lcd-en {
+ pinmux {
+ pins = "gpio88";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio88";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ pp1800_disp_on: pp1800-disp-on {
+ pinmux {
+ pins = "gpio86";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio86";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+};
--
2.31.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v5 3/5] arm64: dts: qcom: sc7180: Add quackingstick dts files
2022-05-10 22:44 ` [PATCH v5 3/5] arm64: dts: qcom: sc7180: Add quackingstick " Joseph S. Barrera III
@ 2022-05-18 13:52 ` Doug Anderson
0 siblings, 0 replies; 7+ messages in thread
From: Doug Anderson @ 2022-05-18 13:52 UTC (permalink / raw)
To: Joseph S. Barrera III
Cc: LKML, Alexandru M Stan, Andy Gross, Bjorn Andersson,
Krzysztof Kozlowski, Rob Herring,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-msm
Hi,
On Tue, May 10, 2022 at 3:46 PM Joseph S. Barrera III
<joebar@chromium.org> wrote:
>
> Quackingstick is a trogdor-based board. These dts files are copies from
> the downstream Chrome OS 5.4 kernel, but with downstream bits removed.
>
> Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
>
> ---
>
> Changes in v5:
> - Removed extra newline
> - Added comment that compatible will be filled in per-board
>
> Changes in v4:
> - Added missing version history
>
> Changes in v3:
> - First inclusion in this series
>
> arch/arm64/boot/dts/qcom/Makefile | 2 +
> .../sc7180-trogdor-quackingstick-r0-lte.dts | 38 ++
> .../qcom/sc7180-trogdor-quackingstick-r0.dts | 26 ++
> .../qcom/sc7180-trogdor-quackingstick.dtsi | 324 ++++++++++++++++++
> 4 files changed, 390 insertions(+)
Just so it doesn't get lost, I saw another downstream change fly by.
Since you already have to spin for v6, you should incorporate that
too:
https://crrev.com/c/3652958
-Doug
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v5 4/5] arm64: dts: qcom: sc7180: Add pazquel dts files
2022-05-10 22:44 [PATCH v5 1/5] arm64: dts: qcom: sc7180: Add wormdingler dts files Joseph S. Barrera III
2022-05-10 22:44 ` [PATCH v5 2/5] arm64: dts: qcom: sc7180: Add mrbland " Joseph S. Barrera III
2022-05-10 22:44 ` [PATCH v5 3/5] arm64: dts: qcom: sc7180: Add quackingstick " Joseph S. Barrera III
@ 2022-05-10 22:44 ` Joseph S. Barrera III
2022-05-10 22:44 ` [PATCH v5 5/5] arm64: dts: qcom: sc7180: Add kingoftown " Joseph S. Barrera III
2022-05-12 22:19 ` [PATCH v5 1/5] arm64: dts: qcom: sc7180: Add wormdingler " Doug Anderson
4 siblings, 0 replies; 7+ messages in thread
From: Joseph S. Barrera III @ 2022-05-10 22:44 UTC (permalink / raw)
To: LKML
Cc: Douglas Anderson, Alexandru M Stan, Joseph S. Barrera III,
Andy Gross, Bjorn Andersson, Krzysztof Kozlowski, Rob Herring,
devicetree, linux-arm-msm
Pazquel is a trogdor-based board. These dts files are unchanged copies
from the downstream Chrome OS 5.4 kernel.
Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
(no changes since v4)
Changes in v4:
- Fixed description (no downstream bits removed).
- Added missing version history
Changes in v3:
- First inclusion in series.
arch/arm64/boot/dts/qcom/Makefile | 4 +
.../sc7180-trogdor-pazquel-lte-parade.dts | 22 ++
.../qcom/sc7180-trogdor-pazquel-lte-ti.dts | 22 ++
.../qcom/sc7180-trogdor-pazquel-parade.dts | 17 ++
.../dts/qcom/sc7180-trogdor-pazquel-ti.dts | 17 ++
.../boot/dts/qcom/sc7180-trogdor-pazquel.dtsi | 221 ++++++++++++++++++
6 files changed, 303 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 5cfd6316768c..dc26704dfe34 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -79,6 +79,10 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-auo.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-boe.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-auo.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-boe.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-parade.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-ti.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-parade.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-ti.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts
new file mode 100644
index 000000000000..ecedab8d1662
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google Pazquel (Parade,LTE)";
+ compatible = "google,pazquel-sku4", "qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts
new file mode 100644
index 000000000000..7863191d92f5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google Pazquel (TI,LTE)";
+ compatible = "google,pazquel-sku0", "google,pazquel-sku2", "qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts
new file mode 100644
index 000000000000..fc53b221b3b6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+
+/ {
+ model = "Google Pazquel (Parade)";
+ compatible = "google,pazquel-sku5", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts
new file mode 100644
index 000000000000..4431b83c2acb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+
+/ {
+ model = "Google Pazquel (TI)";
+ compatible = "google,pazquel-sku1", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
new file mode 100644
index 000000000000..4eed63df43d5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+ap_ec_spi: &spi6 {};
+ap_h1_spi: &spi0 {};
+
+#include "sc7180-trogdor.dtsi"
+
+&ap_sar_sensor {
+ compatible = "semtech,sx9324";
+ semtech,ph0-pin = <1 3 3>;
+ semtech,ph1-pin = <3 1 3>;
+ semtech,ph2-pin = <1 3 3>;
+ semtech,ph3-pin = <0 0 0>;
+ semtech,ph01-resolution = <1024>;
+ semtech,ph23-resolution = <1024>;
+ semtech,startup-sensor = <1>;
+ semtech,ph01-proxraw-strength = <3>;
+ semtech,ph23-proxraw-strength = <1>;
+ semtech,avg-pos-strength = <128>;
+
+ /delete-property/ svdd-supply;
+ vdd-supply = <&pp1800_prox>;
+};
+
+/delete-node/&trackpad;
+&ap_tp_i2c {
+ trackpad: trackpad@15 {
+ compatible = "hid-over-i2c";
+ reg = <0x15>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tp_int_odl>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+ vcc-supply = <&pp3300_fp_tp>;
+ post-power-on-delay-ms = <100>;
+ hid-descr-addr = <0x0001>;
+
+ wakeup-source;
+ };
+};
+
+&keyboard_controller {
+ function-row-physmap = <
+ MATRIX_KEY(0x00, 0x02, 0) /* T1 */
+ MATRIX_KEY(0x03, 0x02, 0) /* T2 */
+ MATRIX_KEY(0x02, 0x02, 0) /* T3 */
+ MATRIX_KEY(0x01, 0x02, 0) /* T4 */
+ MATRIX_KEY(0x03, 0x04, 0) /* T5 */
+ MATRIX_KEY(0x02, 0x04, 0) /* T6 */
+ MATRIX_KEY(0x01, 0x04, 0) /* T7 */
+ MATRIX_KEY(0x02, 0x09, 0) /* T8 */
+ MATRIX_KEY(0x01, 0x09, 0) /* T9 */
+ MATRIX_KEY(0x00, 0x04, 0) /* T10 */
+ >;
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x02, KEY_BACK)
+ MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+ MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+ MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+ MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+ MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+ MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+ MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+ MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+ CROS_STD_MAIN_KEYMAP
+ >;
+};
+
+&panel {
+ compatible = "edp-panel";
+};
+
+&pp3300_dx_edp {
+ gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+};
+
+&en_pp3300_dx_edp {
+ pinmux {
+ pins = "gpio67";
+ };
+
+ pinconf {
+ pins = "gpio67";
+ };
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "TP_INT_ODL",
+ "AP_RAM_ID0",
+ "AP_SKU_ID2",
+ "AP_RAM_ID1",
+ "",
+ "AP_RAM_ID2",
+ "AP_TP_I2C_SDA",
+ "AP_TP_I2C_SCL",
+ "TS_RESET_L",
+ "TS_INT_L",
+ "",
+ "EDP_BRIJ_IRQ",
+ "AP_EDP_BKLTEN",
+ "",
+ "",
+ "EDP_BRIJ_I2C_SDA",
+ "EDP_BRIJ_I2C_SCL",
+ "HUB_RST_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AMP_EN",
+ "P_SENSOR_INT_L",
+ "AP_SAR_SENSOR_SDA",
+ "AP_SAR_SENSOR_SCL",
+ "",
+ "HP_IRQ",
+ "",
+ "",
+ "AP_BRD_ID2",
+ "BRIJ_SUSPEND",
+ "AP_BRD_ID0",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "",
+ "",
+ "",
+ "",
+ "H1_AP_INT_ODL",
+ "",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "HP_I2C_SDA",
+ "HP_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "AMP_BCLK",
+ "AMP_LRCLK",
+ "AMP_DIN",
+ "",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "HP_MCLK",
+ "AP_SKU_ID0",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_SPI_CLK",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_L.
+ */
+ "AP_FLASH_WP_L",
+ "EN_PP3300_DX_EDP",
+ "AP_SPI_CS0_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RST",
+ "UIM2_PRESENT",
+ "UIM1_DATA",
+ "UIM1_CLK",
+ "UIM1_RST",
+ "",
+ "CODEC_PWR_EN",
+ "HUB_EN",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AP_SKU_ID1",
+ "AP_RST_REQ",
+ "",
+ "AP_BRD_ID1",
+ "AP_EC_INT_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "EDP_BRIJ_EN",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AP_TS_PEN_I2C_SDA",
+ "AP_TS_PEN_I2C_SCL",
+ "DP_HOT_PLUG_DET",
+ "EC_IN_RW_ODL";
+};
--
2.31.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v5 5/5] arm64: dts: qcom: sc7180: Add kingoftown dts files
2022-05-10 22:44 [PATCH v5 1/5] arm64: dts: qcom: sc7180: Add wormdingler dts files Joseph S. Barrera III
` (2 preceding siblings ...)
2022-05-10 22:44 ` [PATCH v5 4/5] arm64: dts: qcom: sc7180: Add pazquel " Joseph S. Barrera III
@ 2022-05-10 22:44 ` Joseph S. Barrera III
2022-05-12 22:19 ` [PATCH v5 1/5] arm64: dts: qcom: sc7180: Add wormdingler " Doug Anderson
4 siblings, 0 replies; 7+ messages in thread
From: Joseph S. Barrera III @ 2022-05-10 22:44 UTC (permalink / raw)
To: LKML
Cc: Douglas Anderson, Alexandru M Stan, Joseph S. Barrera III,
Andy Gross, Bjorn Andersson, Krzysztof Kozlowski, Rob Herring,
devicetree, linux-arm-msm
Kingoftown is a trogdor-based board. These dts files are unchanged copies
from the downstream Chrome OS 5.4 kernel.
Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
---
(no changes since v4)
Changes in v4:
- Fixed description (no downstream bits removed).
- Added missing version history.
Changes in v3:
- None
Changes in v2:
- First inclusion in series.
arch/arm64/boot/dts/qcom/Makefile | 2 +
.../dts/qcom/sc7180-trogdor-kingoftown-r0.dts | 44 ++++
.../dts/qcom/sc7180-trogdor-kingoftown-r1.dts | 17 ++
.../dts/qcom/sc7180-trogdor-kingoftown.dtsi | 223 ++++++++++++++++++
4 files changed, 286 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index dc26704dfe34..a9f2ad013179 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -60,6 +60,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r4.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-kingoftown-r0.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-kingoftown-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts
new file mode 100644
index 000000000000..85aec1be98fc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Kingoftown board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-kingoftown.dtsi"
+
+/ {
+ model = "Google Kingoftown (rev0)";
+ compatible = "google,kingoftown-rev0", "qcom,sc7180";
+};
+
+/*
+ * In rev1+, the enable pin of pp3300_fp_tp will be tied to pp1800_l10a
+ * power rail instead, since kingoftown does not have FP.
+ */
+&pp3300_fp_tp {
+ gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&en_fp_rails>;
+};
+
+&tlmm {
+ en_fp_rails: en-fp-rails {
+ pinmux {
+ pins = "gpio74";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio74";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts
new file mode 100644
index 000000000000..2be9138ba89f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Kingoftown board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-kingoftown.dtsi"
+
+/ {
+ model = "Google Kingoftown (rev1+)";
+ compatible = "google,kingoftown", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi
new file mode 100644
index 000000000000..e7503a5b0403
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Kingoftown board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+ap_ec_spi: &spi6 {};
+ap_h1_spi: &spi0 {};
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+&alc5682 {
+ compatible = "realtek,rt5682s";
+ realtek,dmic1-clk-pin = <2>;
+ realtek,dmic-clk-rate-hz = <2048000>;
+};
+
+ap_ts_pen_1v8: &i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ap_ts: touchscreen@10 {
+ compatible = "elan,ekth3500";
+ reg = <0x10>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ vcc33-supply = <&pp3300_ts>;
+
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&keyboard_controller {
+ function-row-physmap = <
+ MATRIX_KEY(0x00, 0x02, 0) /* T1 */
+ MATRIX_KEY(0x03, 0x02, 0) /* T2 */
+ MATRIX_KEY(0x02, 0x02, 0) /* T3 */
+ MATRIX_KEY(0x01, 0x02, 0) /* T4 */
+ MATRIX_KEY(0x03, 0x04, 0) /* T5 */
+ MATRIX_KEY(0x02, 0x04, 0) /* T6 */
+ MATRIX_KEY(0x01, 0x04, 0) /* T7 */
+ MATRIX_KEY(0x02, 0x09, 0) /* T8 */
+ MATRIX_KEY(0x01, 0x09, 0) /* T9 */
+ MATRIX_KEY(0x00, 0x04, 0) /* T10 */
+ >;
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x02, KEY_BACK)
+ MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+ MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+ MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+ MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+ MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+ MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+ MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+ MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+ CROS_STD_MAIN_KEYMAP
+ >;
+};
+
+&panel {
+ compatible = "edp-panel";
+};
+
+&pp3300_dx_edp {
+ gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+};
+
+&sound {
+ compatible = "google,sc7180-trogdor";
+ model = "sc7180-rt5682s-max98357a-1mic";
+};
+
+&wifi {
+ qcom,ath10k-calibration-variant = "GO_KINGOFTOWN";
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+&en_pp3300_dx_edp {
+ pinmux {
+ pins = "gpio67";
+ };
+
+ pinconf {
+ pins = "gpio67";
+ };
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "TP_INT_L", /* 0 */
+ "AP_RAM_ID0",
+ "AP_SKU_ID2",
+ "AP_RAM_ID1",
+ "",
+ "AP_RAM_ID2",
+ "AP_TP_I2C_SDA",
+ "AP_TP_I2C_SCL",
+ "TS_RESET_L",
+ "TS_INT_L",
+ "", /* 10 */
+ "EDP_BRIJ_IRQ",
+ "AP_EDP_BKLTEN",
+ "",
+ "",
+ "EDP_BRIJ_I2C_SDA",
+ "EDP_BRIJ_I2C_SCL",
+ "HUB_RST_L",
+ "",
+ "",
+ "", /* 20 */
+ "",
+ "",
+ "AMP_EN",
+ "",
+ "",
+ "",
+ "",
+ "HP_IRQ",
+ "",
+ "", /* 30 */
+ "AP_BRD_ID2",
+ "BRIJ_SUSPEND",
+ "AP_BRD_ID0",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "BT_UART_CTS",
+ "BT_UART_RTS",
+ "BT_UART_TXD", /* 40 */
+ "BT_UART_RXD",
+ "H1_AP_INT_ODL",
+ "",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "HP_I2C_SDA",
+ "HP_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "AMP_BCLK",
+ "AMP_LRCLK", /* 50 */
+ "AMP_DIN",
+ "",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "HP_MCLK",
+ "AP_SKU_ID0",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI", /* 60 */
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_SPI_CLK",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_L.
+ */
+ "AP_FLASH_WP_L",
+ "EN_PP3300_DX_EDP",
+ "AP_SPI_CS0_L",
+ "",
+ "", /* 70 */
+ "",
+ "",
+ "",
+ "EN_FP_RAILS",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RST",
+ "UIM2_PRESENT_L",
+ "UIM1_DATA",
+ "UIM1_CLK", /* 80 */
+ "UIM1_RST",
+ "",
+ "CODEC_PWR_EN",
+ "HUB_EN",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AP_SKU_ID1", /* 90 */
+ "AP_RST_REQ",
+ "",
+ "AP_BRD_ID1",
+ "AP_EC_INT_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 100 */
+ "",
+ "",
+ "",
+ "EDP_BRIJ_EN",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 110 */
+ "",
+ "",
+ "",
+ "",
+ "AP_TS_PEN_I2C_SDA",
+ "AP_TS_PEN_I2C_SCL",
+ "DP_HOT_PLUG_DET",
+ "EC_IN_RW_ODL";
+};
--
2.31.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v5 1/5] arm64: dts: qcom: sc7180: Add wormdingler dts files
2022-05-10 22:44 [PATCH v5 1/5] arm64: dts: qcom: sc7180: Add wormdingler dts files Joseph S. Barrera III
` (3 preceding siblings ...)
2022-05-10 22:44 ` [PATCH v5 5/5] arm64: dts: qcom: sc7180: Add kingoftown " Joseph S. Barrera III
@ 2022-05-12 22:19 ` Doug Anderson
4 siblings, 0 replies; 7+ messages in thread
From: Doug Anderson @ 2022-05-12 22:19 UTC (permalink / raw)
To: Joseph S. Barrera III
Cc: LKML, Alexandru M Stan, Andy Gross, Bjorn Andersson,
Krzysztof Kozlowski, Rob Herring,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-arm-msm, Stephen Boyd
Hi,
On Tue, May 10, 2022 at 3:46 PM Joseph S. Barrera III
<joebar@chromium.org> wrote:
>
> Wormdingler is a trogdor-based board, shipping to customers as the
> Lenovo IdeaPad Chromebook Duet 3. These dts files are copies from
> the downstream Chrome OS 5.4 kernel, but with the camera
> (sc7180-trogdor-mipi-camera.dtsi) #include removed.
>
> Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
>
> ---
>
> Changes in v5:
> - Replaced _ in node name with -
> - Ordered nodes by name
So it's a bit of a judgement call, but generally the rule is that if
you didn't make very big changes from one version of a patch to the
next that you should keep "Reviewed-by" tags that you've already
received. In this case the changes you made from v4 to v5 were very
small and also very non-controversial (it's hard to believe I would
object to these changes). Thus, it would have been better to keep my
Reviewed-by tag. Everyone understands that it's a judgement call so as
long as it's within reason people won't be too upset at you for making
your best guess. If you're unsure, you can always add a note "after
the cut" (AKA "Commit-notes" in patman speak) explaining why you did
or didn't choose to keep someone's tags.
That being said, offline Stephen pointed out a problem with all of
your v5 patches. Specifically, in the meantime while you were spinning
your patches, Stephen's patch series landed in the upstream tree.
Namely:
19794489fa24 arm64: dts: qcom: Only include sc7180.dtsi in sc7180-trogdor.dtsi
d277cab7afc7 arm64: dts: qcom: sc7180-trogdor: Simplify spi0/spi6 labeling
51d30402be75 arm64: dts: qcom: sc7180-trogdor: Simplify trackpad enabling
Since he won the race of getting the patches landed, that means it's
on you to adjust. You should modify your patches to match what Stephen
did in those 3. ...and, presumably, the changes Stephen is requesting
here probably _are_ big enough that you'd want to remove my
Reviewed-by tag for v6.
Speaking of Stephen, he reviewed your v4 patches, but you didn't copy
him on v5. In general if someone responds to a patch in the series you
should CC them on the next version.
-Doug
^ permalink raw reply [flat|nested] 7+ messages in thread