[PATCH v10 08/10] PCI: qcom: Handle MSIs routed to multiple GIC interrupts

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

On some of Qualcomm platforms each group of 32 MSI vectors is routed to the
separate GIC interrupt. Thus, to receive higher MSI vectors properly,
declare that the host should use split MSI IRQ handling on these
platforms.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 2e5464edc36e..f79752d1d680 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -194,6 +194,7 @@ struct qcom_pcie_ops {
 
 struct qcom_pcie_cfg {
 	const struct qcom_pcie_ops *ops;
+	unsigned int has_split_msi_irq:1;
 	unsigned int pipe_clk_need_muxing:1;
 	unsigned int has_tbu_clk:1;
 	unsigned int has_ddrss_sf_tbu_clk:1;
@@ -1502,6 +1503,7 @@ static const struct qcom_pcie_cfg ipq8064_cfg = {
 
 static const struct qcom_pcie_cfg msm8996_cfg = {
 	.ops = &ops_2_3_2,
+	.has_split_msi_irq = true,
 };
 
 static const struct qcom_pcie_cfg ipq8074_cfg = {
@@ -1514,6 +1516,7 @@ static const struct qcom_pcie_cfg ipq4019_cfg = {
 
 static const struct qcom_pcie_cfg sdm845_cfg = {
 	.ops = &ops_2_7_0,
+	.has_split_msi_irq = true,
 	.has_tbu_clk = true,
 };
 
@@ -1526,12 +1529,14 @@ static const struct qcom_pcie_cfg sm8150_cfg = {
 
 static const struct qcom_pcie_cfg sm8250_cfg = {
 	.ops = &ops_1_9_0,
+	.has_split_msi_irq = true,
 	.has_tbu_clk = true,
 	.has_ddrss_sf_tbu_clk = true,
 };
 
 static const struct qcom_pcie_cfg sm8450_pcie0_cfg = {
 	.ops = &ops_1_9_0,
+	.has_split_msi_irq = true,
 	.has_ddrss_sf_tbu_clk = true,
 	.pipe_clk_need_muxing = true,
 	.has_aggre0_clk = true,
@@ -1540,6 +1545,7 @@ static const struct qcom_pcie_cfg sm8450_pcie0_cfg = {
 
 static const struct qcom_pcie_cfg sm8450_pcie1_cfg = {
 	.ops = &ops_1_9_0,
+	.has_split_msi_irq = true,
 	.has_ddrss_sf_tbu_clk = true,
 	.pipe_clk_need_muxing = true,
 	.has_aggre1_clk = true,
@@ -1547,6 +1553,7 @@ static const struct qcom_pcie_cfg sm8450_pcie1_cfg = {
 
 static const struct qcom_pcie_cfg sc7280_cfg = {
 	.ops = &ops_1_9_0,
+	.has_split_msi_irq = true,
 	.has_tbu_clk = true,
 	.pipe_clk_need_muxing = true,
 };
@@ -1592,6 +1599,11 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 
 	pcie->cfg = pcie_cfg;
 
+	if (pcie->cfg->has_split_msi_irq) {
+		pp->num_vectors = MAX_MSI_IRQS;
+		pp->has_split_msi_irq = true;
+	}
+
 	pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH);
 	if (IS_ERR(pcie->reset)) {
 		ret = PTR_ERR(pcie->reset);
-- 
2.35.1