All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bernhard Beschow <shentey@gmail.com>
To: qemu-devel@nongnu.org
Cc: qemu-trivial@nongnu.org, sstabellini@kernel.org,
	anthony.perard@citrix.com, paul@xen.org,
	xen-devel@lists.xenproject.org,
	Bernhard Beschow <shentey@gmail.com>,
	"Michael S. Tsirkin" <mst@redhat.com>,
	Marcel Apfelbaum <marcel.apfelbaum@gmail.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Richard Henderson <richard.henderson@linaro.org>,
	Eduardo Habkost <eduardo@habkost.net>,
	John Snow <jsnow@redhat.com>,
	qemu-block@nongnu.org (open list:IDE)
Subject: [PATCH v2 3/3] include/hw/ide: Unexport pci_piix3_xen_ide_unplug()
Date: Fri, 13 May 2022 20:09:57 +0200	[thread overview]
Message-ID: <20220513180957.90514-4-shentey@gmail.com> (raw)
In-Reply-To: <20220513180957.90514-1-shentey@gmail.com>

This function was declared in a generic and public header, implemented
in a device-specific source file but only used in xen_platform. Given its
'aux' parameter, this function is more xen-specific than piix-specific.
Also, the hardcoded magic constants seem to be generic and related to
PCIIDEState and IDEBus rather than piix.

Therefore, move this function to xen_platform, unexport it, and drop the
"piix3" in the function name as well.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Paul Durrant <paul@xen.org>
---
 hw/i386/xen/xen_platform.c | 48 +++++++++++++++++++++++++++++++++++++-
 hw/ide/piix.c              | 46 ------------------------------------
 include/hw/ide.h           |  3 ---
 3 files changed, 47 insertions(+), 50 deletions(-)

diff --git a/hw/i386/xen/xen_platform.c b/hw/i386/xen/xen_platform.c
index 72028449ba..a64265cca0 100644
--- a/hw/i386/xen/xen_platform.c
+++ b/hw/i386/xen/xen_platform.c
@@ -26,6 +26,7 @@
 #include "qemu/osdep.h"
 #include "qapi/error.h"
 #include "hw/ide.h"
+#include "hw/ide/pci.h"
 #include "hw/pci/pci.h"
 #include "hw/xen/xen_common.h"
 #include "migration/vmstate.h"
@@ -134,6 +135,51 @@ static void pci_unplug_nics(PCIBus *bus)
     pci_for_each_device(bus, 0, unplug_nic, NULL);
 }
 
+/*
+ * The Xen HVM unplug protocol [1] specifies a mechanism to allow guests to
+ * request unplug of 'aux' disks (which is stated to mean all IDE disks,
+ * except the primary master).
+ *
+ * NOTE: The semantics of what happens if unplug of all disks and 'aux' disks
+ *       is simultaneously requested is not clear. The implementation assumes
+ *       that an 'all' request overrides an 'aux' request.
+ *
+ * [1] https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/misc/hvm-emulated-unplug.pandoc
+ */
+static void pci_xen_ide_unplug(DeviceState *dev, bool aux)
+{
+    PCIIDEState *pci_ide;
+    int i;
+    IDEDevice *idedev;
+    IDEBus *idebus;
+    BlockBackend *blk;
+
+    pci_ide = PCI_IDE(dev);
+
+    for (i = aux ? 1 : 0; i < 4; i++) {
+        idebus = &pci_ide->bus[i / 2];
+        blk = idebus->ifs[i % 2].blk;
+
+        if (blk && idebus->ifs[i % 2].drive_kind != IDE_CD) {
+            if (!(i % 2)) {
+                idedev = idebus->master;
+            } else {
+                idedev = idebus->slave;
+            }
+
+            blk_drain(blk);
+            blk_flush(blk);
+
+            blk_detach_dev(blk, DEVICE(idedev));
+            idebus->ifs[i % 2].blk = NULL;
+            idedev->conf.blk = NULL;
+            monitor_remove_blk(blk);
+            blk_unref(blk);
+        }
+    }
+    qdev_reset_all(dev);
+}
+
 static void unplug_disks(PCIBus *b, PCIDevice *d, void *opaque)
 {
     uint32_t flags = *(uint32_t *)opaque;
@@ -147,7 +193,7 @@ static void unplug_disks(PCIBus *b, PCIDevice *d, void *opaque)
 
     switch (pci_get_word(d->config + PCI_CLASS_DEVICE)) {
     case PCI_CLASS_STORAGE_IDE:
-        pci_piix3_xen_ide_unplug(DEVICE(d), aux);
+        pci_xen_ide_unplug(DEVICE(d), aux);
         break;
 
     case PCI_CLASS_STORAGE_SCSI:
diff --git a/hw/ide/piix.c b/hw/ide/piix.c
index bc1b37512a..9a9b28078e 100644
--- a/hw/ide/piix.c
+++ b/hw/ide/piix.c
@@ -173,52 +173,6 @@ static void pci_piix_ide_realize(PCIDevice *dev, Error **errp)
     }
 }
 
-/*
- * The Xen HVM unplug protocol [1] specifies a mechanism to allow guests to
- * request unplug of 'aux' disks (which is stated to mean all IDE disks,
- * except the primary master).
- *
- * NOTE: The semantics of what happens if unplug of all disks and 'aux' disks
- *       is simultaneously requested is not clear. The implementation assumes
- *       that an 'all' request overrides an 'aux' request.
- *
- * [1] https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/misc/hvm-emulated-unplug.pandoc
- */
-int pci_piix3_xen_ide_unplug(DeviceState *dev, bool aux)
-{
-    PCIIDEState *pci_ide;
-    int i;
-    IDEDevice *idedev;
-    IDEBus *idebus;
-    BlockBackend *blk;
-
-    pci_ide = PCI_IDE(dev);
-
-    for (i = aux ? 1 : 0; i < 4; i++) {
-        idebus = &pci_ide->bus[i / 2];
-        blk = idebus->ifs[i % 2].blk;
-
-        if (blk && idebus->ifs[i % 2].drive_kind != IDE_CD) {
-            if (!(i % 2)) {
-                idedev = idebus->master;
-            } else {
-                idedev = idebus->slave;
-            }
-
-            blk_drain(blk);
-            blk_flush(blk);
-
-            blk_detach_dev(blk, DEVICE(idedev));
-            idebus->ifs[i % 2].blk = NULL;
-            idedev->conf.blk = NULL;
-            monitor_remove_blk(blk);
-            blk_unref(blk);
-        }
-    }
-    qdev_reset_all(dev);
-    return 0;
-}
-
 static void pci_piix_ide_exitfn(PCIDevice *dev)
 {
     PCIIDEState *d = PCI_IDE(dev);
diff --git a/include/hw/ide.h b/include/hw/ide.h
index c5ce5da4f4..60f1f4f714 100644
--- a/include/hw/ide.h
+++ b/include/hw/ide.h
@@ -8,9 +8,6 @@
 ISADevice *isa_ide_init(ISABus *bus, int iobase, int iobase2, int isairq,
                         DriveInfo *hd0, DriveInfo *hd1);
 
-/* ide-pci.c */
-int pci_piix3_xen_ide_unplug(DeviceState *dev, bool aux);
-
 /* ide-mmio.c */
 void mmio_ide_init_drives(DeviceState *dev, DriveInfo *hd0, DriveInfo *hd1);
 
-- 
2.36.1



  parent reply	other threads:[~2022-05-13 18:25 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-13 18:09 [PATCH v2 0/3] PIIX3-IDE XEN cleanup Bernhard Beschow
2022-05-13 18:09 ` [PATCH v2 1/3] hw/ide/piix: Remove redundant "piix3-ide-xen" device class Bernhard Beschow
2022-05-19 14:29   ` Anthony PERARD
2022-05-19 14:29     ` Anthony PERARD via
2022-05-13 18:09 ` [PATCH v2 2/3] hw/ide/piix: Add some documentation to pci_piix3_xen_ide_unplug() Bernhard Beschow
2022-05-19 14:33   ` Anthony PERARD
2022-05-19 14:33     ` Anthony PERARD via
2022-05-13 18:09 ` Bernhard Beschow [this message]
2022-05-19 14:37   ` [PATCH v2 3/3] include/hw/ide: Unexport pci_piix3_xen_ide_unplug() Anthony PERARD
2022-05-19 14:37     ` Anthony PERARD via
2022-05-30 13:21   ` Philippe Mathieu-Daudé
2022-05-30 13:21     ` Philippe Mathieu-Daudé via
2022-05-28 21:23 ` [PATCH v2 0/3] PIIX3-IDE XEN cleanup Bernhard Beschow
2022-06-02 21:30   ` Bernhard Beschow

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220513180957.90514-4-shentey@gmail.com \
    --to=shentey@gmail.com \
    --cc=anthony.perard@citrix.com \
    --cc=eduardo@habkost.net \
    --cc=jsnow@redhat.com \
    --cc=marcel.apfelbaum@gmail.com \
    --cc=mst@redhat.com \
    --cc=paul@xen.org \
    --cc=pbonzini@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-trivial@nongnu.org \
    --cc=richard.henderson@linaro.org \
    --cc=sstabellini@kernel.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.