All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ye Bin <yebin10@huawei.com>
To: <tytso@mit.edu>, <adilger.kernel@dilger.ca>,
	<linux-ext4@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <jack@suse.cz>,
	Ye Bin <yebin10@huawei.com>
Subject: [PATCH -next v3] ext4: fix bug_on in ext4_writepages
Date: Mon, 16 May 2022 09:27:52 +0800	[thread overview]
Message-ID: <20220516012752.17241-1-yebin10@huawei.com> (raw)

we got issue as follows:
EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls
------------[ cut here ]------------
kernel BUG at fs/ext4/inode.c:2708!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ #155
RIP: 0010:ext4_writepages+0x1977/0x1c10
RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000
RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002
RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000
R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001
R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028
FS:  00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 do_writepages+0x130/0x3a0
 filemap_fdatawrite_wbc+0x83/0xa0
 filemap_flush+0xab/0xe0
 ext4_alloc_da_blocks+0x51/0x120
 __ext4_ioctl+0x1534/0x3210
 __x64_sys_ioctl+0x12c/0x170
 do_syscall_64+0x3b/0x90

It may happen as follows:
1. write inline_data inode
vfs_write
  new_sync_write
    ext4_file_write_iter
      ext4_buffered_write_iter
        generic_perform_write
          ext4_da_write_begin
            ext4_da_write_inline_data_begin -> If inline data size too
            small will allocate block to write, then mapping will has
            dirty page
                ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA
2. fallocate
do_vfs_ioctl
  ioctl_preallocate
    vfs_fallocate
      ext4_fallocate
        ext4_convert_inline_data
          ext4_convert_inline_data_nolock
            ext4_map_blocks -> fail will goto restore data
            ext4_restore_inline_data
              ext4_create_inline_data
              ext4_write_inline_data
              ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA
3. writepages
__ext4_ioctl
  ext4_alloc_da_blocks
    filemap_flush
      filemap_fdatawrite_wbc
        do_writepages
          ext4_writepages
            if (ext4_has_inline_data(inode))
              BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA))

The root cause of this issue is we destory inline data until call ext4_writepages
under delay allocation mode. But there maybe already covert from inline to extent.
To solved this issue, we call filemap_flush firstly.

Signed-off-by: Ye Bin <yebin10@huawei.com>
---
 fs/ext4/inline.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index 6d253edebf9f..79a7d5d700f7 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -2002,6 +2002,12 @@ int ext4_convert_inline_data(struct inode *inode)
 	if (!ext4_has_inline_data(inode)) {
 		ext4_clear_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA);
 		return 0;
+	} else if (!ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) {
+		error = filemap_flush(inode->i_mapping);
+		if (error)
+			return error;
+		if (!ext4_has_inline_data(inode))
+			return 0;
 	}
 
 	needed_blocks = ext4_writepage_trans_blocks(inode);
-- 
2.31.1


             reply	other threads:[~2022-05-16  1:14 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-16  1:27 Ye Bin [this message]
2022-05-16 11:26 ` [PATCH -next v3] ext4: fix bug_on in ext4_writepages Jan Kara

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220516012752.17241-1-yebin10@huawei.com \
    --to=yebin10@huawei.com \
    --cc=adilger.kernel@dilger.ca \
    --cc=jack@suse.cz \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tytso@mit.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.