All of lore.kernel.org
 help / color / mirror / Atom feed
From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	kernel@pengutronix.de,
	Steffen Trumtrar <s.trumtrar@pengutronix.de>
Subject: [PATCH v2 2/3] ARM: dts: stm32: add STM32MP1-based Phytec SoM
Date: Mon, 16 May 2022 14:16:18 +0200	[thread overview]
Message-ID: <20220516121619.2617401-2-s.trumtrar@pengutronix.de> (raw)
In-Reply-To: <20220516121619.2617401-1-s.trumtrar@pengutronix.de>

The Phytec STM32MP1 based SoMs feature up to 1 GB DDR3LP RAM, up to 1 GB eMMC,
up to 16 MB QSPI and up to 128 GB NAND flash.

As multiple default pinctrls are overwritten, collect them in one place
in stm32mp157c-phycore-stm32mp15-pinctrl.dtsi.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
 arch/arm/boot/dts/Makefile                    |   3 +-
 ...stm32mp157c-phycore-stm32mp15-pinctrl.dtsi | 317 +++++++++
 .../stm32mp157c-phycore-stm32mp15-som.dtsi    | 653 ++++++++++++++++++
 3 files changed, 972 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi
 create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-som.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7c16f8a2b738..72154fed7e8a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1174,7 +1174,8 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32mp157c-emsbc-argon.dtb \
 	stm32mp157c-ev1.dtb \
 	stm32mp157c-lxa-mc1.dtb \
-	stm32mp157c-odyssey.dtb
+	stm32mp157c-odyssey.dtb \
+	stm32mp157c-phycore-stm32mp1-3.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-a1000.dtb \
 	sun4i-a10-ba10-tvbox.dtb \
diff --git a/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi
new file mode 100644
index 000000000000..b0b590df43b6
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved
+ * Author: Dom VOVARD <dom.vovard@linrt.com>.
+ */
+#include "stm32mp15-pinctrl.dtsi"
+
+&pinctrl {
+	dcmi_pins_a: dcmi-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 8,  AF13)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  AF13)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  AF13)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('H', 9,  AF13)>,/* DCMI_D0 */
+				 <STM32_PINMUX('C', 7,  AF13)>,/* DCMI_D1 */
+				 <STM32_PINMUX('E', 0,  AF13)>,/* DCMI_D2 */
+				 <STM32_PINMUX('E', 1,  AF13)>,/* DCMI_D3 */
+				 <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
+				 <STM32_PINMUX('I', 4,  AF13)>,/* DCMI_D5 */
+				 <STM32_PINMUX('E', 5,  AF13)>,/* DCMI_D6 */
+				 <STM32_PINMUX('I', 7,  AF13)>,/* DCMI_D7 */
+				 <STM32_PINMUX('I', 1,  AF13)>,/* DCMI_D8 */
+				 <STM32_PINMUX('H', 7,  AF13)>;/* DCMI_D9 */
+			bias-disable;
+		};
+	};
+
+	dcmi_sleep_pins_a: dcmi-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 8,  ANALOG)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  ANALOG)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  ANALOG)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('H', 9,  ANALOG)>,/* DCMI_D0 */
+				 <STM32_PINMUX('C', 7,  ANALOG)>,/* DCMI_D1 */
+				 <STM32_PINMUX('E', 0,  ANALOG)>,/* DCMI_D2 */
+				 <STM32_PINMUX('E', 1,  ANALOG)>,/* DCMI_D3 */
+				 <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
+				 <STM32_PINMUX('I', 4,  ANALOG)>,/* DCMI_D5 */
+				 <STM32_PINMUX('E', 5,  ANALOG)>,/* DCMI_D6 */
+				 <STM32_PINMUX('I', 7,  ANALOG)>,/* DCMI_D7 */
+				 <STM32_PINMUX('I', 1,  ANALOG)>,/* DCMI_D8 */
+				 <STM32_PINMUX('H', 7,  ANALOG)>;/* DCMI_D9 */
+		};
+	};
+
+	ethernet0_rgmii_pins_a: rgmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 4, AF11)>,	/* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, AF11)>,	/* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>,	/* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>,	/* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, AF11)>,	/* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, AF11)>,	/* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('A', 2, AF11)>,	/* ETH_MDIO */
+				 <STM32_PINMUX('C', 1, AF11)>;	/* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>,	/* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>,	/* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, AF11)>,	/* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, AF11)>,	/* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, AF11)>,	/* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>;	/* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+	};
+
+	ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 4, ANALOG)>,  /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>,  /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, ANALOG)>,  /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('A', 2, ANALOG)>,  /* ETH_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>,  /* ETH_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, ANALOG)>,  /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, ANALOG)>,  /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH_RGMII_RX_CTL */
+		};
+	};
+
+	i2c1_pins_a: i2c1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c1_pins_sleep_a: i2c1-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+		};
+	};
+
+	pwm5_pins_a: pwm5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 0, AF2)>; /* TIM5_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm5_sleep_pins_a: pwm5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 0, ANALOG)>; /* TIM5_CH4 */
+		};
+	};
+
+	sai2b_pins_a: sai2b-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 2, AF10)>, /* SAI2_SCK_B */
+				 <STM32_PINMUX('C', 0, AF8)>, /* SAI2_FS_B */
+				 <STM32_PINMUX('H', 3, AF10)>; /* SAI2_MCLK_B */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('E', 6, AF8)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+				<STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('E', 6, AF8)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('E', 6, ANALOG)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+		};
+	};
+
+	sdmmc2_d47_pins_a: sdmmc2-d47-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>,	/* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, AF10)>,	/* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, AF10)>,	/* SDMMC2_D6 */
+				 <STM32_PINMUX('D', 3, AF9)>;	/* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
+	usart1_pins_b: usart1-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 12, AF7)>; /* USART1_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 11, AF7)>; /* USART1_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart1_idle_pins_b: usart1-idle-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 12, ANALOG)>, /* USART1_RTS */
+				 <STM32_PINMUX('A', 11, AF7)>; /* USART1_CTS_NSS */
+		};
+	};
+
+	usart1_sleep_pins_b: usart1-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 12, ANALOG)>, /* USART1_RTS */
+				 <STM32_PINMUX('A', 11, ANALOG)>; /* USART1_CTS_NSS */
+		};
+	};
+
+	usart3_idle_pins_a: usart3-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>; /* USART3_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+			bias-disable;
+		};
+	};
+
+	usart3_sleep_pins_a: usart3-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('B', 12, ANALOG)>; /* USART3_RX */
+		};
+	};
+};
+
+&pinctrl_z {
+	spi1_sleep_pins_a: spi1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 0, ANALOG)>, /* SPI1_SCK */
+				 <STM32_PINMUX('Z', 1, ANALOG)>, /* SPI1_MISO */
+				 <STM32_PINMUX('Z', 2, ANALOG)>; /* SPI1_MOSI */
+		};
+	};
+
+	usart1_idle_pins_a: usart1-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('Z', 7, ANALOG)>; /* USART1_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('Z', 6, AF7)>; /* USART1_RX */
+			bias-disable;
+		};
+	};
+
+	usart1_sleep_pins_a: usart1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 7, ANALOG)>, /* USART1_TX */
+				 <STM32_PINMUX('Z', 6, ANALOG)>; /* USART1_RX */
+		};
+	};
+
+	usart1_pins_a: usart1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('Z', 7, AF7)>; /* USART1_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('Z', 6, AF7)>; /* USART1_RX */
+			bias-disable;
+		};
+	};
+};
+
+&sai2a_pins_b {
+	pins {
+		pinmux = <STM32_PINMUX('I', 6, AF10)>; /* SAI2_SD_A */
+		bias-disable;
+	};
+};
+
+&sai2a_sleep_pins_b {
+	pins {
+		pinmux = <STM32_PINMUX('I', 6, ANALOG)>; /* SAI2_SD_A */
+	};
+};
+
+&sai2b_sleep_pins_a {
+	pins {
+		pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */
+			 <STM32_PINMUX('H', 2, ANALOG)>, /* SAI2_SCK_B */
+			 <STM32_PINMUX('C', 0, ANALOG)>, /* SAI2_FS_B */
+			 <STM32_PINMUX('H', 3, ANALOG)>; /* SAI2_MCLK_B */
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-som.dtsi b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-som.dtsi
new file mode 100644
index 000000000000..08a135537a47
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-som.dtsi
@@ -0,0 +1,653 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved
+ * Author: Dom VOVARD <dom.vovard@linrt.com>.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "stm32mp157c-phycore-stm32mp15-pinctrl.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		mmc0 = &sdmmc1;
+		mmc1 = &sdmmc2;
+		mmc2 = &sdmmc3;
+		rtc0 = &i2c4_rtc;
+		rtc1 = &rtc;
+		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &usart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		status = "okay";
+
+		home {
+			label = "Home";
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		enter {
+			label = "Enter";
+			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x2000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x2000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10044000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10044000 0x4000>;
+			no-map;
+		};
+
+		gpu_reserved: gpu@f8000000 {
+			reg = <0xf8000000 0x8000000>;
+			no-map;
+		};
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "STM32MP1-PHYCORE";
+		routing =
+			"Playback", "MCLK", /* Set a route between "MCLK" and "playback" widgets */
+			"Capture", "MCLK";
+		dais = <&sai2b_port>,
+		       <&sai2a_port>;
+		status = "okay";
+	};
+
+	vin: vin {
+		compatible = "regulator-fixed";
+		regulator-name = "vin";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&sram {
+	dma_pool: dma_pool@0 {
+		reg = <0x50000 0x10000>;
+		pool;
+	};
+};
+
+&dma1 {
+	sram = <&dma_pool>;
+};
+
+&dma2 {
+	sram = <&dma_pool>;
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii-id";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+	st,eth-clk-sel = "true";
+	clock-names = "stmmaceth",
+		      "mac-clk-tx",
+		      "mac-clk-rx",
+		      "eth-ck",
+		      "syscfg-clk",
+		      "ethstp";
+	clocks = <&rcc ETHMAC>,
+		 <&rcc ETHTX>,
+		 <&rcc ETHRX>,
+		 <&rcc ETHCK_K>,
+		 <&rcc SYSCFG>,
+		 <&rcc ETHSTP>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			interrupt-parent = <&gpiog>;
+			interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,min-output-impedance;
+			enet-phy-lane-no-swap;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_pins_sleep_a>;
+	i2c-scl-rising-time-ns = <100>;
+	i2c-scl-falling-time-ns = <7>;
+	status = "okay";
+
+	tlv320@18 {
+		compatible = "ti,tlv320aic3007";
+		#sound-dai-cells = <0>;
+		reg = <0x18>;
+		status = "okay";
+
+		ai3x-micbias-vg = <2>;
+
+		/* gpio-reset = <&gpio5 8 GPIO_ACTIVE_LOW>; */
+		AVDD-supply = <&v3v3>;
+		IOVDD-supply = <&v3v3>;
+		DRVDD-supply = <&v3v3>;
+		DVDD-supply = <&v1v8_audio>;
+
+		clocks = <&sai2b>;
+		clock-names = "MCLK";
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tlv320_tx_endpoint: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&sai2b_endpoint>;
+				frame-master;
+				bitclock-master;
+			};
+
+			tlv320_rx_endpoint: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&sai2a_endpoint>;
+				frame-master;
+				bitclock-master;
+			};
+		};
+	};
+
+	stmpe811@44 {
+		compatible = "st,stmpe811";
+		reg = <0x44>;
+		interrupts = <3 2>;
+		interrupt-parent = <&gpioi>;
+		vio-supply = <&v3v3>;
+		vcc-supply = <&v3v3>;
+		status = "disabled";
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <1>;
+			st,touch-det-delay = <2>;
+			st,settling = <2>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+		};
+	};
+
+	pca9533@62 {
+		compatible = "nxp,pca9533";
+		reg = <0x62>;
+		status = "okay";
+
+		red-power {
+			label = "pca:red:power";
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		green-power {
+			label = "pca:green:power";
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		blue-power {
+			type = <PCA9532_TYPE_LED>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c4_pins_a>;
+	pinctrl-1 = <&i2c4_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+		wakeup-source;
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+			buck1-supply = <&vin>;
+			buck2-supply = <&vin>;
+			buck3-supply = <&vin>;
+			buck4-supply = <&vin>;
+			ldo1-supply = <&v3v3>;
+			ldo2-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo4-supply = <&vin>;
+			ldo5-supply = <&v3v3>;
+			ldo6-supply = <&v3v3>;
+			vref_ddr-supply = <&vin>;
+			boost-supply = <&vin>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			v1v8_audio: ldo1 {
+				regulator-name = "v1v8_audio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO1 0>;
+
+			};
+
+			vdd_eth_2v5: ldo2 {
+				regulator-name = "dd_eth_2v5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO2 0>;
+
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdda: ldo5 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			vdd_eth_1v0: ldo6 {
+				regulator-name = "vdd_eth_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO6 0>;
+
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+				regulator-active-discharge;
+			};
+
+			vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge;
+			};
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>,
+				     <IT_PONKEY_R 0>;
+			interrupt-names = "onkey-falling",
+					  "onkey-rising";
+			power-off-time-sec = <10>;
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+
+	i2c4_eeprom: eeprom@50 {
+		compatible = "microchip,24c32",
+			     "atmel,24c32";
+		reg = <0x50>;
+		status = "disabled";
+	};
+
+	i2c4_rtc: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+		status = "disabled";
+	};
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0",
+		     "vq1",
+		     "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	interrupt-names = "wdg";
+	recovery;
+	status = "okay";
+};
+
+&m_can2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can2_pins_a>;
+	pinctrl-1 = <&m_can2_sleep_pins_a>;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	reg = <0x58003000 0x1000>,
+	      <0x70000000 0x4000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "disabled";
+
+	flash0: w25q128@0 {
+		compatible = "winbond,w25q128jv",
+			     "jedec,spi-nor",
+			     "spi-flash";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sai2 {
+	clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	clock-names = "pclk", "x8k", "x11k";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sai2a_pins_b>, <&sai2b_pins_a>;
+	pinctrl-1 = <&sai2a_sleep_pins_b>, <&sai2b_sleep_pins_a>;
+	status = "okay";
+
+	sai2a: audio-controller@4400b004 {
+		compatible = "st,stm32-sai-sub-a";
+		dma-names = "rx";
+		st,sync = <&sai2b 2>;
+		status = "okay";
+		clocks = <&rcc SAI2_K>,
+			 <&sai2b>;
+		clock-names = "sai_ck", "MCLK";
+
+		sai2a_port: port {
+			sai2a_endpoint: endpoint {
+				remote-endpoint = <&tlv320_rx_endpoint>;
+				format = "i2s";
+				mclk-fs = <256>;
+				dai-tdm-slot-num = <2>;
+				dai-tdm-slot-width = <16>;
+			};
+		};
+	};
+
+	sai2b: audio-controller@4400b024 {
+		compatible = "st,stm32-sai-sub-b";
+		#clock-cells = <0>;
+		dma-names = "tx";
+		clocks = <&rcc SAI2_K>;
+		clock-names = "sai_ck";
+		status = "okay";
+
+		sai2b_port: port {
+			sai2b_endpoint: endpoint {
+				remote-endpoint = <&tlv320_tx_endpoint>;
+				format = "i2s";
+				mclk-fs = <256>;
+				dai-tdm-slot-num = <2>;
+				dai-tdm-slot-width = <16>;
+			};
+		};
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	cd-gpios = <&gpiof 3 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	st,neg-edge;
+	bus-width = <8>;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&v3v3>;
+	mmc-ddr-3_3v;
+	status = "disabled";
+};
+
+&spi1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi1_pins_a>;
+	pinctrl-1 = <&spi1_sleep_pins_a>;
+	cs-gpios = <&gpioz 3 0>;
+	status = "okay";
+
+	spi@0 {
+		compatible = "spidev";
+		spi-max-frequency = <10000000>;
+		reg = <0>;
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	pinctrl-3 = <&uart4_pins_a>;
+	status = "okay";
+};
+
+&usart1 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart1_pins_a &usart1_pins_b>;
+	pinctrl-1 = <&usart1_sleep_pins_a &usart1_sleep_pins_b>;
+	pinctrl-2 = <&usart1_idle_pins_a &usart1_idle_pins_b>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usart3 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart3_pins_a>;
+	pinctrl-1 = <&usart3_sleep_pins_a>;
+	pinctrl-2 = <&usart3_idle_pins_a>;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbh_ohci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbotg_hs {
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	vbus-supply = <&vbus_otg>;
+	status = "okay";
+};
+
+&usbphyc {
+	vdd3v3-supply = <&vdd_usb>;
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	vbus-supply = <&vbus_sw>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-05-16 12:18 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-16 12:16 [PATCH v2 1/3] ARM: dts: stm32: add SRAM binding Steffen Trumtrar
2022-05-16 12:16 ` Steffen Trumtrar [this message]
2022-05-16 12:32   ` [PATCH v2 2/3] ARM: dts: stm32: add STM32MP1-based Phytec SoM Ahmad Fatoum
2022-05-16 15:16   ` Alexandre TORGUE
2022-05-16 12:16 ` [PATCH v2 3/3] ARM: dts: stm32: add STM32MP1-based Phytec board Steffen Trumtrar
2022-05-16 15:11   ` Alexandre TORGUE
2022-05-16 12:24 ` [PATCH v2 1/3] ARM: dts: stm32: add SRAM binding Ahmad Fatoum
2022-05-16 12:35   ` Ahmad Fatoum

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220516121619.2617401-2-s.trumtrar@pengutronix.de \
    --to=s.trumtrar@pengutronix.de \
    --cc=alexandre.torgue@foss.st.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --subject='Re: [PATCH v2 2/3] ARM: dts: stm32: add STM32MP1-based Phytec SoM' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.