All of lore.kernel.org
 help / color / mirror / Atom feed
From: Huacai Chen <chenhuacai@loongson.cn>
To: Arnd Bergmann <arnd@arndb.de>, Andy Lutomirski <luto@kernel.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Peter Zijlstra <peterz@infradead.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	David Airlie <airlied@linux.ie>, Jonathan Corbet <corbet@lwn.net>,
	Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org, Xuefeng Li <lixuefeng@loongson.cn>,
	Yanteng Si <siyanteng@loongson.cn>,
	Huacai Chen <chenhuacai@gmail.com>, Guo Ren <guoren@kernel.org>,
	Xuerui Wang <kernel@xen0n.name>,
	Jiaxun Yang <jiaxun.yang@flygoat.com>,
	Stephen Rothwell <sfr@canb.auug.org.au>,
	Huacai Chen <chenhuacai@loongson.cn>
Subject: [PATCH V11 21/22] LoongArch: Add Non-Uniform Memory Access (NUMA) support
Date: Wed, 18 May 2022 17:57:08 +0800	[thread overview]
Message-ID: <20220518095709.1313120-5-chenhuacai@loongson.cn> (raw)
In-Reply-To: <20220518095709.1313120-1-chenhuacai@loongson.cn>

Add Non-Uniform Memory Access (NUMA) support for LoongArch. LoongArch
has 48-bit physical address, but the HyperTransport I/O bus only support
40-bit address, so we need a custom phys_to_dma() and dma_to_phys() to
extract the 4-bit node id (bit 44~47) from Loongson-3's 48-bit physical
address space and embed it into 40-bit. In the 40-bit dma address, node
id offset can be read from the LS7A_DMA_CFG register.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
---
 arch/loongarch/Kconfig                  |  21 ++
 arch/loongarch/include/asm/bootinfo.h   |   2 +
 arch/loongarch/include/asm/dma-direct.h |  11 +
 arch/loongarch/include/asm/mmzone.h     |  18 +
 arch/loongarch/include/asm/numa.h       |  69 ++++
 arch/loongarch/include/asm/pgtable.h    |  12 +
 arch/loongarch/include/asm/topology.h   |  21 ++
 arch/loongarch/kernel/Makefile          |   2 +
 arch/loongarch/kernel/acpi.c            |  95 +++++
 arch/loongarch/kernel/dma.c             |  40 ++
 arch/loongarch/kernel/module.c          |   1 +
 arch/loongarch/kernel/numa.c            | 466 ++++++++++++++++++++++++
 arch/loongarch/kernel/setup.c           |   5 +-
 arch/loongarch/kernel/smp.c             |  52 ++-
 arch/loongarch/kernel/traps.c           |   4 +-
 arch/loongarch/mm/init.c                |  13 +
 arch/loongarch/mm/tlb.c                 |  37 +-
 arch/loongarch/pci/acpi.c               |   3 +
 18 files changed, 844 insertions(+), 28 deletions(-)
 create mode 100644 arch/loongarch/include/asm/dma-direct.h
 create mode 100644 arch/loongarch/include/asm/mmzone.h
 create mode 100644 arch/loongarch/include/asm/numa.h
 create mode 100644 arch/loongarch/kernel/dma.c
 create mode 100644 arch/loongarch/kernel/numa.c

diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
index 2fdda05e9c67..7b5b86501d54 100644
--- a/arch/loongarch/Kconfig
+++ b/arch/loongarch/Kconfig
@@ -8,6 +8,7 @@ config LOONGARCH
 	select ARCH_ENABLE_MEMORY_HOTPLUG
 	select ARCH_ENABLE_MEMORY_HOTREMOVE
 	select ARCH_HAS_ACPI_TABLE_UPGRADE	if ACPI
+	select ARCH_HAS_PHYS_TO_DMA
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_INLINE_READ_LOCK if !PREEMPTION
@@ -42,6 +43,7 @@ config LOONGARCH
 	select ARCH_SUPPORTS_ACPI
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_SUPPORTS_HUGETLBFS
+	select ARCH_SUPPORTS_NUMA_BALANCING
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_USE_QUEUED_RWLOCKS
@@ -94,12 +96,15 @@ config LOONGARCH
 	select HAVE_PERF_EVENTS
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_RSEQ
+	select HAVE_SETUP_PER_CPU_AREA if NUMA
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_TIF_NOHZ
 	select HAVE_VIRT_CPU_ACCOUNTING_GEN if !SMP
 	select IRQ_FORCED_THREADING
 	select IRQ_LOONGARCH_CPU
 	select MODULES_USE_ELF_RELA if MODULES
+	select NEED_PER_CPU_EMBED_FIRST_CHUNK
+	select NEED_PER_CPU_PAGE_FIRST_CHUNK
 	select OF
 	select OF_EARLY_FLATTREE
 	select PCI
@@ -112,6 +117,7 @@ config LOONGARCH
 	select SYSCTL_EXCEPTION_TRACE
 	select SWIOTLB
 	select TRACE_IRQFLAGS_SUPPORT
+	select USE_PERCPU_NUMA_NODE_ID
 	select ZONE_DMA32
 
 config 32BIT
@@ -351,6 +357,20 @@ config NR_CPUS
 	  This allows you to specify the maximum number of CPUs which this
 	  kernel will support.
 
+config NUMA
+	bool "NUMA Support"
+	select ACPI_NUMA if ACPI
+	help
+	  Say Y to compile the kernel with NUMA (Non-Uniform Memory Access)
+	  support.  This option improves performance on systems with more
+	  than one NUMA node; on single node systems it is generally better
+	  to leave it disabled.
+
+config NODES_SHIFT
+	int
+	default "6"
+	depends on NUMA
+
 config FORCE_MAX_ZONEORDER
 	int "Maximum zone order"
 	range 14 64 if PAGE_SIZE_64KB
@@ -397,6 +417,7 @@ config ARCH_SELECT_MEMORY_MODEL
 
 config ARCH_FLATMEM_ENABLE
 	def_bool y
+	depends on !NUMA
 
 config ARCH_SPARSEMEM_ENABLE
 	def_bool y
diff --git a/arch/loongarch/include/asm/bootinfo.h b/arch/loongarch/include/asm/bootinfo.h
index 0076a9e1a817..9c376fa633d3 100644
--- a/arch/loongarch/include/asm/bootinfo.h
+++ b/arch/loongarch/include/asm/bootinfo.h
@@ -13,6 +13,8 @@ const char *get_system_type(void);
 extern void init_environ(void);
 extern void memblock_init(void);
 extern void platform_init(void);
+extern void plat_swiotlb_setup(void);
+extern int __init init_numa_memory(void);
 
 struct loongson_board_info {
 	int bios_size;
diff --git a/arch/loongarch/include/asm/dma-direct.h b/arch/loongarch/include/asm/dma-direct.h
new file mode 100644
index 000000000000..75ccd808a2af
--- /dev/null
+++ b/arch/loongarch/include/asm/dma-direct.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
+ */
+#ifndef _LOONGARCH_DMA_DIRECT_H
+#define _LOONGARCH_DMA_DIRECT_H
+
+dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr);
+phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr);
+
+#endif /* _LOONGARCH_DMA_DIRECT_H */
diff --git a/arch/loongarch/include/asm/mmzone.h b/arch/loongarch/include/asm/mmzone.h
new file mode 100644
index 000000000000..fe67d0b4b33d
--- /dev/null
+++ b/arch/loongarch/include/asm/mmzone.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Author: Huacai Chen (chenhuacai@loongson.cn)
+ * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
+ */
+#ifndef _ASM_MMZONE_H_
+#define _ASM_MMZONE_H_
+
+#include <asm/page.h>
+#include <asm/numa.h>
+
+extern struct pglist_data *node_data[];
+
+#define NODE_DATA(nid)	(node_data[(nid)])
+
+extern void setup_zero_pages(void);
+
+#endif /* _ASM_MMZONE_H_ */
diff --git a/arch/loongarch/include/asm/numa.h b/arch/loongarch/include/asm/numa.h
new file mode 100644
index 000000000000..8f9c81af7930
--- /dev/null
+++ b/arch/loongarch/include/asm/numa.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * LoongArch specific ACPICA environments and implementation
+ *
+ * Author: Jianmin Lv <lvjianmin@loongson.cn>
+ *         Huacai Chen <chenhuacai@loongson.cn>
+ *
+ * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
+ */
+
+#ifndef _ASM_LOONGARCH_NUMA_H
+#define _ASM_LOONGARCH_NUMA_H
+
+#include <linux/nodemask.h>
+
+#define NODE_ADDRSPACE_SHIFT 44
+
+#define pa_to_nid(addr)		(((addr) & 0xf00000000000) >> NODE_ADDRSPACE_SHIFT)
+#define nid_to_addrbase(nid)	(_ULCAST_(nid) << NODE_ADDRSPACE_SHIFT)
+
+#ifdef CONFIG_NUMA
+
+extern int numa_off;
+extern s16 __cpuid_to_node[CONFIG_NR_CPUS];
+extern nodemask_t numa_nodes_parsed __initdata;
+
+struct numa_memblk {
+	u64			start;
+	u64			end;
+	int			nid;
+};
+
+#define NR_NODE_MEMBLKS		(MAX_NUMNODES*2)
+struct numa_meminfo {
+	int			nr_blks;
+	struct numa_memblk	blk[NR_NODE_MEMBLKS];
+};
+
+extern int __init numa_add_memblk(int nodeid, u64 start, u64 end);
+
+extern void __init early_numa_add_cpu(int cpuid, s16 node);
+extern void numa_add_cpu(unsigned int cpu);
+extern void numa_remove_cpu(unsigned int cpu);
+
+static inline void numa_clear_node(int cpu)
+{
+}
+
+static inline void set_cpuid_to_node(int cpuid, s16 node)
+{
+	__cpuid_to_node[cpuid] = node;
+}
+
+extern int early_cpu_to_node(int cpu);
+
+#else
+
+static inline void early_numa_add_cpu(int cpuid, s16 node)	{ }
+static inline void numa_add_cpu(unsigned int cpu)		{ }
+static inline void numa_remove_cpu(unsigned int cpu)		{ }
+
+static inline int early_cpu_to_node(int cpu)
+{
+	return 0;
+}
+
+#endif	/* CONFIG_NUMA */
+
+#endif	/* _ASM_LOONGARCH_NUMA_H */
diff --git a/arch/loongarch/include/asm/pgtable.h b/arch/loongarch/include/asm/pgtable.h
index 5e33987d0a13..5dc84d8f18d6 100644
--- a/arch/loongarch/include/asm/pgtable.h
+++ b/arch/loongarch/include/asm/pgtable.h
@@ -541,6 +541,18 @@ static inline pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm,
 
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
+#ifdef CONFIG_NUMA_BALANCING
+static inline long pte_protnone(pte_t pte)
+{
+	return (pte_val(pte) & _PAGE_PROTNONE);
+}
+
+static inline long pmd_protnone(pmd_t pmd)
+{
+	return (pmd_val(pmd) & _PAGE_PROTNONE);
+}
+#endif /* CONFIG_NUMA_BALANCING */
+
 /*
  * We provide our own get_unmapped area to cope with the virtual aliasing
  * constraints placed on us by the cache architecture.
diff --git a/arch/loongarch/include/asm/topology.h b/arch/loongarch/include/asm/topology.h
index da135841e5b1..66128dec0bf6 100644
--- a/arch/loongarch/include/asm/topology.h
+++ b/arch/loongarch/include/asm/topology.h
@@ -7,6 +7,27 @@
 
 #include <linux/smp.h>
 
+#ifdef CONFIG_NUMA
+
+extern cpumask_t cpus_on_node[];
+
+#define cpumask_of_node(node)  (&cpus_on_node[node])
+
+struct pci_bus;
+extern int pcibus_to_node(struct pci_bus *);
+
+#define cpumask_of_pcibus(bus)	(cpu_online_mask)
+
+extern unsigned char node_distances[MAX_NUMNODES][MAX_NUMNODES];
+
+void numa_set_distance(int from, int to, int distance);
+
+#define node_distance(from, to)	(node_distances[(from)][(to)])
+
+#else
+#define pcibus_to_node(bus)	0
+#endif
+
 #ifdef CONFIG_SMP
 #define topology_physical_package_id(cpu)	(cpu_data[cpu].package)
 #define topology_core_id(cpu)			(cpu_data[cpu].core)
diff --git a/arch/loongarch/kernel/Makefile b/arch/loongarch/kernel/Makefile
index 2cb6f698716a..940de9173542 100644
--- a/arch/loongarch/kernel/Makefile
+++ b/arch/loongarch/kernel/Makefile
@@ -20,4 +20,6 @@ obj-$(CONFIG_PROC_FS)		+= proc.o
 
 obj-$(CONFIG_SMP)		+= smp.o
 
+obj-$(CONFIG_NUMA)		+= numa.o
+
 CPPFLAGS_vmlinux.lds		:= $(KBUILD_CFLAGS)
diff --git a/arch/loongarch/kernel/acpi.c b/arch/loongarch/kernel/acpi.c
index 762e996cb6fe..8e9b0e77f72e 100644
--- a/arch/loongarch/kernel/acpi.c
+++ b/arch/loongarch/kernel/acpi.c
@@ -14,6 +14,7 @@
 #include <linux/memblock.h>
 #include <linux/serial_core.h>
 #include <asm/io.h>
+#include <asm/numa.h>
 #include <asm/loongson.h>
 
 int acpi_disabled;
@@ -367,6 +368,79 @@ int __init acpi_boot_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_ACPI_NUMA
+
+static __init int setup_node(int pxm)
+{
+	return acpi_map_pxm_to_node(pxm);
+}
+
+/*
+ * Callback for SLIT parsing.  pxm_to_node() returns NUMA_NO_NODE for
+ * I/O localities since SRAT does not list them.  I/O localities are
+ * not supported at this point.
+ */
+unsigned int numa_distance_cnt;
+
+static inline unsigned int get_numa_distances_cnt(struct acpi_table_slit *slit)
+{
+	return slit->locality_count;
+}
+
+void __init numa_set_distance(int from, int to, int distance)
+{
+	if ((u8)distance != distance || (from == to && distance != LOCAL_DISTANCE)) {
+		pr_warn_once("Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
+				from, to, distance);
+		return;
+	}
+
+	node_distances[from][to] = distance;
+}
+
+/* Callback for Proximity Domain -> CPUID mapping */
+void __init
+acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
+{
+	int pxm, node;
+
+	if (srat_disabled())
+		return;
+	if (pa->header.length != sizeof(struct acpi_srat_cpu_affinity)) {
+		bad_srat();
+		return;
+	}
+	if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0)
+		return;
+	pxm = pa->proximity_domain_lo;
+	if (acpi_srat_revision >= 2) {
+		pxm |= (pa->proximity_domain_hi[0] << 8);
+		pxm |= (pa->proximity_domain_hi[1] << 16);
+		pxm |= (pa->proximity_domain_hi[2] << 24);
+	}
+	node = setup_node(pxm);
+	if (node < 0) {
+		pr_err("SRAT: Too many proximity domains %x\n", pxm);
+		bad_srat();
+		return;
+	}
+
+	if (pa->apic_id >= CONFIG_NR_CPUS) {
+		pr_info("SRAT: PXM %u -> CPU 0x%02x -> Node %u skipped apicid that is too big\n",
+				pxm, pa->apic_id, node);
+		return;
+	}
+
+	early_numa_add_cpu(pa->apic_id, node);
+
+	set_cpuid_to_node(pa->apic_id, node);
+	node_set(node, numa_nodes_parsed);
+	pr_info("SRAT: PXM %u -> CPU 0x%02x -> Node %u\n", pxm, pa->apic_id, node);
+}
+
+void __init acpi_numa_arch_fixup(void) {}
+#endif
+
 void __init arch_reserve_mem_area(acpi_physical_address addr, size_t size)
 {
 	memblock_reserve(addr, size);
@@ -376,6 +450,22 @@ void __init arch_reserve_mem_area(acpi_physical_address addr, size_t size)
 
 #include <acpi/processor.h>
 
+static int __ref acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
+{
+#ifdef CONFIG_ACPI_NUMA
+	int nid;
+
+	nid = acpi_get_node(handle);
+	if (nid != NUMA_NO_NODE) {
+		set_cpuid_to_node(physid, nid);
+		node_set(nid, numa_nodes_parsed);
+		set_cpu_numa_node(cpu, nid);
+		cpumask_set_cpu(cpu, cpumask_of_node(nid));
+	}
+#endif
+	return 0;
+}
+
 int acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, u32 acpi_id, int *pcpu)
 {
 	int cpu;
@@ -386,6 +476,8 @@ int acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, u32 acpi_id, int *pcpu
 		return cpu;
 	}
 
+	acpi_map_cpu2node(handle, cpu, physid);
+
 	*pcpu = cpu;
 
 	return 0;
@@ -394,6 +486,9 @@ EXPORT_SYMBOL(acpi_map_cpu);
 
 int acpi_unmap_cpu(int cpu)
 {
+#ifdef CONFIG_ACPI_NUMA
+	set_cpuid_to_node(cpu_logical_map(cpu), NUMA_NO_NODE);
+#endif
 	set_cpu_present(cpu, false);
 	num_processors--;
 
diff --git a/arch/loongarch/kernel/dma.c b/arch/loongarch/kernel/dma.c
new file mode 100644
index 000000000000..659b8faccaee
--- /dev/null
+++ b/arch/loongarch/kernel/dma.c
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
+ */
+#include <linux/init.h>
+#include <linux/dma-direct.h>
+#include <linux/dma-mapping.h>
+#include <linux/dma-map-ops.h>
+#include <linux/swiotlb.h>
+
+#include <asm/bootinfo.h>
+#include <asm/dma.h>
+#include <asm/loongson.h>
+
+/*
+ * We extract 4bit node id (bit 44~47) from Loongson-3's
+ * 48bit physical address space and embed it into 40bit.
+ */
+
+static int node_id_offset;
+
+dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	long nid = (paddr >> 44) & 0xf;
+
+	return ((nid << 44) ^ paddr) | (nid << node_id_offset);
+}
+
+phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+	long nid = (daddr >> node_id_offset) & 0xf;
+
+	return ((nid << node_id_offset) ^ daddr) | (nid << 44);
+}
+
+void __init plat_swiotlb_setup(void)
+{
+	swiotlb_init(1);
+	node_id_offset = ((readl(LS7A_DMA_CFG) & LS7A_DMA_NODE_MASK) >> LS7A_DMA_NODE_SHF) + 36;
+}
diff --git a/arch/loongarch/kernel/module.c b/arch/loongarch/kernel/module.c
index 87b3768f1eef..638427ff0d51 100644
--- a/arch/loongarch/kernel/module.c
+++ b/arch/loongarch/kernel/module.c
@@ -11,6 +11,7 @@
 #include <linux/moduleloader.h>
 #include <linux/elf.h>
 #include <linux/mm.h>
+#include <linux/numa.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
 #include <linux/fs.h>
diff --git a/arch/loongarch/kernel/numa.c b/arch/loongarch/kernel/numa.c
new file mode 100644
index 000000000000..a76f547a5aa3
--- /dev/null
+++ b/arch/loongarch/kernel/numa.c
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Author:  Xiang Gao <gaoxiang@loongson.cn>
+ *          Huacai Chen <chenhuacai@loongson.cn>
+ *
+ * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/mmzone.h>
+#include <linux/export.h>
+#include <linux/nodemask.h>
+#include <linux/swap.h>
+#include <linux/memblock.h>
+#include <linux/pfn.h>
+#include <linux/acpi.h>
+#include <linux/efi.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <asm/bootinfo.h>
+#include <asm/loongson.h>
+#include <asm/numa.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/sections.h>
+#include <asm/time.h>
+
+int numa_off;
+struct pglist_data *node_data[MAX_NUMNODES];
+unsigned char node_distances[MAX_NUMNODES][MAX_NUMNODES];
+
+EXPORT_SYMBOL(node_data);
+EXPORT_SYMBOL(node_distances);
+
+static struct numa_meminfo numa_meminfo;
+cpumask_t cpus_on_node[MAX_NUMNODES];
+cpumask_t phys_cpus_on_node[MAX_NUMNODES];
+EXPORT_SYMBOL(cpus_on_node);
+
+/*
+ * apicid, cpu, node mappings
+ */
+s16 __cpuid_to_node[CONFIG_NR_CPUS] = {
+	[0 ... CONFIG_NR_CPUS - 1] = NUMA_NO_NODE
+};
+EXPORT_SYMBOL(__cpuid_to_node);
+
+nodemask_t numa_nodes_parsed __initdata;
+
+#ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA
+unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
+EXPORT_SYMBOL(__per_cpu_offset);
+
+static int __init pcpu_cpu_to_node(int cpu)
+{
+	return early_cpu_to_node(cpu);
+}
+
+static int __init pcpu_cpu_distance(unsigned int from, unsigned int to)
+{
+	if (early_cpu_to_node(from) == early_cpu_to_node(to))
+		return LOCAL_DISTANCE;
+	else
+		return REMOTE_DISTANCE;
+}
+
+void __init pcpu_populate_pte(unsigned long addr)
+{
+	pgd_t *pgd = pgd_offset_k(addr);
+	p4d_t *p4d = p4d_offset(pgd, addr);
+	pud_t *pud;
+	pmd_t *pmd;
+
+	if (p4d_none(*p4d)) {
+		pud_t *new;
+
+		new = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
+		pgd_populate(&init_mm, pgd, new);
+#ifndef __PAGETABLE_PUD_FOLDED
+		pud_init((unsigned long)new, (unsigned long)invalid_pmd_table);
+#endif
+	}
+
+	pud = pud_offset(p4d, addr);
+	if (pud_none(*pud)) {
+		pmd_t *new;
+
+		new = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
+		pud_populate(&init_mm, pud, new);
+#ifndef __PAGETABLE_PMD_FOLDED
+		pmd_init((unsigned long)new, (unsigned long)invalid_pte_table);
+#endif
+	}
+
+	pmd = pmd_offset(pud, addr);
+	if (!pmd_present(*pmd)) {
+		pte_t *new;
+
+		new = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
+		pmd_populate_kernel(&init_mm, pmd, new);
+	}
+}
+
+void __init setup_per_cpu_areas(void)
+{
+	unsigned long delta;
+	unsigned int cpu;
+	int rc = -EINVAL;
+
+	if (pcpu_chosen_fc == PCPU_FC_AUTO) {
+		if (nr_node_ids >= 8)
+			pcpu_chosen_fc = PCPU_FC_PAGE;
+		else
+			pcpu_chosen_fc = PCPU_FC_EMBED;
+	}
+
+	/*
+	 * Always reserve area for module percpu variables.  That's
+	 * what the legacy allocator did.
+	 */
+	if (pcpu_chosen_fc != PCPU_FC_PAGE) {
+		rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE,
+					    PERCPU_DYNAMIC_RESERVE, PMD_SIZE,
+					    pcpu_cpu_distance, pcpu_cpu_to_node);
+		if (rc < 0)
+			pr_warn("%s allocator failed (%d), falling back to page size\n",
+				pcpu_fc_names[pcpu_chosen_fc], rc);
+	}
+	if (rc < 0)
+		rc = pcpu_page_first_chunk(PERCPU_MODULE_RESERVE, pcpu_cpu_to_node);
+	if (rc < 0)
+		panic("cannot initialize percpu area (err=%d)", rc);
+
+	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
+	for_each_possible_cpu(cpu)
+		__per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu];
+}
+#endif
+
+/*
+ * Get nodeid by logical cpu number.
+ * __cpuid_to_node maps phyical cpu id to node, so we
+ * should use cpu_logical_map(cpu) to index it.
+ *
+ * This routine is only used in early phase during
+ * booting, after setup_per_cpu_areas calling and numa_node
+ * initialization, cpu_to_node will be used instead.
+ */
+int early_cpu_to_node(int cpu)
+{
+	int physid = cpu_logical_map(cpu);
+
+	if (physid < 0)
+		return NUMA_NO_NODE;
+
+	return __cpuid_to_node[physid];
+}
+
+void __init early_numa_add_cpu(int cpuid, s16 node)
+{
+	int cpu = __cpu_number_map[cpuid];
+
+	if (cpu < 0)
+		return;
+
+	cpumask_set_cpu(cpu, &cpus_on_node[node]);
+	cpumask_set_cpu(cpuid, &phys_cpus_on_node[node]);
+}
+
+void numa_add_cpu(unsigned int cpu)
+{
+	int nid = cpu_to_node(cpu);
+	cpumask_set_cpu(cpu, &cpus_on_node[nid]);
+}
+
+void numa_remove_cpu(unsigned int cpu)
+{
+	int nid = cpu_to_node(cpu);
+	cpumask_clear_cpu(cpu, &cpus_on_node[nid]);
+}
+
+static int __init numa_add_memblk_to(int nid, u64 start, u64 end,
+				     struct numa_meminfo *mi)
+{
+	/* ignore zero length blks */
+	if (start == end)
+		return 0;
+
+	/* whine about and ignore invalid blks */
+	if (start > end || nid < 0 || nid >= MAX_NUMNODES) {
+		pr_warn("NUMA: Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",
+			   nid, start, end - 1);
+		return 0;
+	}
+
+	if (mi->nr_blks >= NR_NODE_MEMBLKS) {
+		pr_err("NUMA: too many memblk ranges\n");
+		return -EINVAL;
+	}
+
+	mi->blk[mi->nr_blks].start = PFN_ALIGN(start);
+	mi->blk[mi->nr_blks].end = PFN_ALIGN(end - PAGE_SIZE + 1);
+	mi->blk[mi->nr_blks].nid = nid;
+	mi->nr_blks++;
+	return 0;
+}
+
+/**
+ * numa_add_memblk - Add one numa_memblk to numa_meminfo
+ * @nid: NUMA node ID of the new memblk
+ * @start: Start address of the new memblk
+ * @end: End address of the new memblk
+ *
+ * Add a new memblk to the default numa_meminfo.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+int __init numa_add_memblk(int nid, u64 start, u64 end)
+{
+	return numa_add_memblk_to(nid, start, end, &numa_meminfo);
+}
+
+static void __init alloc_node_data(int nid)
+{
+	void *nd;
+	unsigned long nd_pa;
+	size_t nd_sz = roundup(sizeof(pg_data_t), PAGE_SIZE);
+
+	nd_pa = memblock_phys_alloc_try_nid(nd_sz, SMP_CACHE_BYTES, nid);
+	if (!nd_pa) {
+		pr_err("Cannot find %zu Byte for node_data (initial node: %d)\n", nd_sz, nid);
+		return;
+	}
+
+	nd = __va(nd_pa);
+
+	node_data[nid] = nd;
+	memset(nd, 0, sizeof(pg_data_t));
+}
+
+static void __init node_mem_init(unsigned int node)
+{
+	unsigned long start_pfn, end_pfn;
+	unsigned long node_addrspace_offset;
+
+	node_addrspace_offset = nid_to_addrbase(node);
+	pr_info("Node%d's addrspace_offset is 0x%lx\n",
+			node, node_addrspace_offset);
+
+	get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
+	pr_info("Node%d: start_pfn=0x%lx, end_pfn=0x%lx\n",
+		node, start_pfn, end_pfn);
+
+	alloc_node_data(node);
+}
+
+#ifdef CONFIG_ACPI_NUMA
+
+/*
+ * Sanity check to catch more bad NUMA configurations (they are amazingly
+ * common).  Make sure the nodes cover all memory.
+ */
+static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi)
+{
+	int i;
+	u64 numaram, biosram;
+
+	numaram = 0;
+	for (i = 0; i < mi->nr_blks; i++) {
+		u64 s = mi->blk[i].start >> PAGE_SHIFT;
+		u64 e = mi->blk[i].end >> PAGE_SHIFT;
+
+		numaram += e - s;
+		numaram -= __absent_pages_in_range(mi->blk[i].nid, s, e);
+		if ((s64)numaram < 0)
+			numaram = 0;
+	}
+	max_pfn = max_low_pfn;
+	biosram = max_pfn - absent_pages_in_range(0, max_pfn);
+
+	BUG_ON((s64)(biosram - numaram) >= (1 << (20 - PAGE_SHIFT)));
+	return true;
+}
+
+static void __init add_node_intersection(u32 node, u64 start, u64 size, u32 type)
+{
+	static unsigned long num_physpages;
+
+	num_physpages += (size >> PAGE_SHIFT);
+	pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx Bytes\n",
+		node, type, start, size);
+	pr_info("       start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
+		start >> PAGE_SHIFT, (start + size) >> PAGE_SHIFT, num_physpages);
+	memblock_set_node(start, size, &memblock.memory, node);
+}
+
+/*
+ * add_numamem_region
+ *
+ * Add a uasable memory region described by BIOS. The
+ * routine gets each intersection between BIOS's region
+ * and node's region, and adds them into node's memblock
+ * pool.
+ *
+ */
+static void __init add_numamem_region(u64 start, u64 end, u32 type)
+{
+	u32 i;
+	u64 ofs = start;
+
+	if (start >= end) {
+		pr_debug("Invalid region: %016llx-%016llx\n", start, end);
+		return;
+	}
+
+	for (i = 0; i < numa_meminfo.nr_blks; i++) {
+		struct numa_memblk *mb = &numa_meminfo.blk[i];
+
+		if (ofs > mb->end)
+			continue;
+
+		if (end > mb->end) {
+			add_node_intersection(mb->nid, ofs, mb->end - ofs, type);
+			ofs = mb->end;
+		} else {
+			add_node_intersection(mb->nid, ofs, end - ofs, type);
+			break;
+		}
+	}
+}
+
+static void __init init_node_memblock(void)
+{
+	u32 mem_type;
+	u64 mem_end, mem_start, mem_size;
+	efi_memory_desc_t *md;
+
+	/* Parse memory information and activate */
+	for_each_efi_memory_desc(md) {
+		mem_type = md->type;
+		mem_start = md->phys_addr;
+		mem_size = md->num_pages << EFI_PAGE_SHIFT;
+		mem_end = mem_start + mem_size;
+
+		switch (mem_type) {
+		case EFI_LOADER_CODE:
+		case EFI_LOADER_DATA:
+		case EFI_BOOT_SERVICES_CODE:
+		case EFI_BOOT_SERVICES_DATA:
+		case EFI_PERSISTENT_MEMORY:
+		case EFI_CONVENTIONAL_MEMORY:
+			add_numamem_region(mem_start, mem_end, mem_type);
+			break;
+		case EFI_PAL_CODE:
+		case EFI_UNUSABLE_MEMORY:
+		case EFI_ACPI_RECLAIM_MEMORY:
+			add_numamem_region(mem_start, mem_end, mem_type);
+			fallthrough;
+		case EFI_RESERVED_TYPE:
+		case EFI_RUNTIME_SERVICES_CODE:
+		case EFI_RUNTIME_SERVICES_DATA:
+		case EFI_MEMORY_MAPPED_IO:
+		case EFI_MEMORY_MAPPED_IO_PORT_SPACE:
+			pr_info("Resvd: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx Bytes\n",
+					mem_type, mem_start, mem_size);
+			break;
+		}
+	}
+}
+
+static void __init numa_default_distance(void)
+{
+	int row, col;
+
+	for (row = 0; row < MAX_NUMNODES; row++)
+		for (col = 0; col < MAX_NUMNODES; col++) {
+			if (col == row)
+				node_distances[row][col] = LOCAL_DISTANCE;
+			else
+				/* We assume that one node per package here!
+				 *
+				 * A SLIT should be used for multiple nodes
+				 * per package to override default setting.
+				 */
+				node_distances[row][col] = REMOTE_DISTANCE;
+	}
+}
+
+int __init init_numa_memory(void)
+{
+	int i;
+	int ret;
+	int node;
+
+	for (i = 0; i < NR_CPUS; i++)
+		set_cpuid_to_node(i, NUMA_NO_NODE);
+
+	numa_default_distance();
+	nodes_clear(numa_nodes_parsed);
+	nodes_clear(node_possible_map);
+	nodes_clear(node_online_map);
+	memset(&numa_meminfo, 0, sizeof(numa_meminfo));
+
+	/* Parse SRAT and SLIT if provided by firmware. */
+	ret = acpi_numa_init();
+	if (ret < 0)
+		return ret;
+
+	node_possible_map = numa_nodes_parsed;
+	if (WARN_ON(nodes_empty(node_possible_map)))
+		return -EINVAL;
+
+	init_node_memblock();
+	if (numa_meminfo_cover_memory(&numa_meminfo) == false)
+		return -EINVAL;
+
+	for_each_node_mask(node, node_possible_map) {
+		node_mem_init(node);
+		node_set_online(node);
+	}
+	max_low_pfn = PHYS_PFN(memblock_end_of_DRAM());
+
+	setup_nr_node_ids();
+	loongson_sysconf.nr_nodes = nr_node_ids;
+	loongson_sysconf.cores_per_node = cpumask_weight(&phys_cpus_on_node[0]);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(init_numa_memory);
+#endif
+
+void __init paging_init(void)
+{
+	unsigned int node;
+	unsigned long zones_size[MAX_NR_ZONES] = {0, };
+
+	for_each_online_node(node) {
+		unsigned long start_pfn, end_pfn;
+
+		get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
+
+		if (end_pfn > max_low_pfn)
+			max_low_pfn = end_pfn;
+	}
+#ifdef CONFIG_ZONE_DMA32
+	zones_size[ZONE_DMA32] = MAX_DMA32_PFN;
+#endif
+	zones_size[ZONE_NORMAL] = max_low_pfn;
+	free_area_init(zones_size);
+}
+
+void __init mem_init(void)
+{
+	high_memory = (void *) __va(get_num_physpages() << PAGE_SHIFT);
+	memblock_free_all();
+	setup_zero_pages();	/* This comes from node 0 */
+}
+
+int pcibus_to_node(struct pci_bus *bus)
+{
+	return dev_to_node(&bus->dev);
+}
+EXPORT_SYMBOL(pcibus_to_node);
diff --git a/arch/loongarch/kernel/setup.c b/arch/loongarch/kernel/setup.c
index c314c22cdb22..b04691b80e6c 100644
--- a/arch/loongarch/kernel/setup.c
+++ b/arch/loongarch/kernel/setup.c
@@ -198,6 +198,9 @@ void __init platform_init(void)
 	acpi_boot_init();
 #endif
 
+#ifdef CONFIG_NUMA
+	init_numa_memory();
+#endif
 	dmi_setup();
 	smbios_parse();
 	pr_info("The BIOS Version: %s\n", b_info.bios_version);
@@ -236,7 +239,7 @@ static void __init arch_mem_init(char **cmdline_p)
 	sparse_init();
 	memblock_set_bottom_up(true);
 
-	swiotlb_init(1);
+	plat_swiotlb_setup();
 
 	dma_contiguous_reserve(PFN_PHYS(max_low_pfn));
 
diff --git a/arch/loongarch/kernel/smp.c b/arch/loongarch/kernel/smp.c
index 84b5447c1e8e..4da0daca5f35 100644
--- a/arch/loongarch/kernel/smp.c
+++ b/arch/loongarch/kernel/smp.c
@@ -25,6 +25,7 @@
 #include <asm/idle.h>
 #include <asm/loongson.h>
 #include <asm/mmu_context.h>
+#include <asm/numa.h>
 #include <asm/processor.h>
 #include <asm/setup.h>
 #include <asm/time.h>
@@ -222,6 +223,9 @@ void loongson3_init_secondary(void)
 
 	iocsr_writel(0xffffffff, LOONGARCH_IOCSR_IPI_EN);
 
+#ifdef CONFIG_NUMA
+	numa_add_cpu(cpu);
+#endif
 	per_cpu(cpu_state, cpu) = CPU_ONLINE;
 	cpu_data[cpu].core =
 		     cpu_logical_map(cpu) % loongson_sysconf.cores_per_package;
@@ -263,6 +267,9 @@ int loongson3_cpu_disable(void)
 	if (io_master(cpu))
 		return -EBUSY;
 
+#ifdef CONFIG_NUMA
+	numa_remove_cpu(cpu);
+#endif
 	set_cpu_online(cpu, false);
 	calculate_cpu_foreign_map();
 	local_irq_save(flags);
@@ -487,14 +494,36 @@ void calculate_cpu_foreign_map(void)
 /* Preload SMP state for boot cpu */
 void smp_prepare_boot_cpu(void)
 {
-	unsigned int cpu;
+	unsigned int cpu, node, rr_node;
 
 	set_cpu_possible(0, true);
 	set_cpu_online(0, true);
 	set_my_cpu_offset(per_cpu_offset(0));
 
-	for_each_possible_cpu(cpu)
-		set_cpu_numa_node(cpu, 0);
+	rr_node = first_node(node_online_map);
+	for_each_possible_cpu(cpu) {
+		node = early_cpu_to_node(cpu);
+
+		/*
+		 * The mapping between present cpus and nodes has been
+		 * built during MADT and SRAT parsing.
+		 *
+		 * If possible cpus = present cpus here, early_cpu_to_node
+		 * will return valid node.
+		 *
+		 * If possible cpus > present cpus here (e.g. some possible
+		 * cpus will be added by cpu-hotplug later), for possible but
+		 * not present cpus, early_cpu_to_node will return NUMA_NO_NODE,
+		 * and we just map them to online nodes in round-robin way.
+		 * Once hotplugged, new correct mapping will be built for them.
+		 */
+		if (node != NUMA_NO_NODE)
+			set_cpu_numa_node(cpu, node);
+		else {
+			set_cpu_numa_node(cpu, rr_node);
+			rr_node = next_node_in(rr_node, node_online_map);
+		}
+	}
 }
 
 /* called from main before smp_init() */
@@ -660,17 +689,10 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned l
 		on_each_cpu_mask(mm_cpumask(mm), flush_tlb_range_ipi, &fd, 1);
 	} else {
 		unsigned int cpu;
-		int exec = vma->vm_flags & VM_EXEC;
 
 		for_each_online_cpu(cpu) {
-			/*
-			 * flush_cache_range() will only fully flush icache if
-			 * the VMA is executable, otherwise we must invalidate
-			 * ASID without it appearing to has_valid_asid() as if
-			 * mm has been completely unused by that CPU.
-			 */
 			if (cpu != smp_processor_id() && cpu_context(cpu, mm))
-				cpu_context(cpu, mm) = !exec;
+				cpu_context(cpu, mm) = 0;
 		}
 		local_flush_tlb_range(vma, start, end);
 	}
@@ -715,14 +737,8 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
 		unsigned int cpu;
 
 		for_each_online_cpu(cpu) {
-			/*
-			 * flush_cache_page() only does partial flushes, so
-			 * invalidate ASID without it appearing to
-			 * has_valid_asid() as if mm has been completely unused
-			 * by that CPU.
-			 */
 			if (cpu != smp_processor_id() && cpu_context(cpu, vma->vm_mm))
-				cpu_context(cpu, vma->vm_mm) = 1;
+				cpu_context(cpu, vma->vm_mm) = 0;
 		}
 		local_flush_tlb_page(vma, page);
 	}
diff --git a/arch/loongarch/kernel/traps.c b/arch/loongarch/kernel/traps.c
index 968b7899d50e..4ec2b2a3e6b5 100644
--- a/arch/loongarch/kernel/traps.c
+++ b/arch/loongarch/kernel/traps.c
@@ -630,7 +630,7 @@ asmlinkage void noinstr do_vint(struct pt_regs *regs, unsigned long sp)
 	irqentry_exit(regs, state);
 }
 
-extern void tlb_init(void);
+extern void tlb_init(int cpu);
 extern void cache_error_setup(void);
 
 unsigned long eentry;
@@ -669,7 +669,7 @@ void per_cpu_trap_init(int cpu)
 		for (i = 0; i < 64; i++)
 			set_handler(i * VECSIZE, handle_reserved, VECSIZE);
 
-	tlb_init();
+	tlb_init(cpu);
 	cpu_cache_init();
 }
 
diff --git a/arch/loongarch/mm/init.c b/arch/loongarch/mm/init.c
index afd6634ce171..7094a68c9b83 100644
--- a/arch/loongarch/mm/init.c
+++ b/arch/loongarch/mm/init.c
@@ -84,6 +84,7 @@ int __ref page_is_ram(unsigned long pfn)
 	return memblock_is_memory(addr) && !memblock_is_reserved(addr);
 }
 
+#ifndef CONFIG_NUMA
 void __init paging_init(void)
 {
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
@@ -107,6 +108,7 @@ void __init mem_init(void)
 	memblock_free_all();
 	setup_zero_pages();	/* Setup zeroed pages.  */
 }
+#endif /* !CONFIG_NUMA */
 
 void __ref free_initmem(void)
 {
@@ -129,6 +131,17 @@ int arch_add_memory(int nid, u64 start, u64 size, struct mhp_params *params)
 	return ret;
 }
 
+#ifdef CONFIG_NUMA
+int memory_add_physaddr_to_nid(u64 start)
+{
+	int nid;
+
+	nid = pa_to_nid(start);
+	return nid;
+}
+EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
+#endif
+
 #ifdef CONFIG_MEMORY_HOTREMOVE
 void arch_remove_memory(u64 start, u64 size, struct vmem_altmap *altmap)
 {
diff --git a/arch/loongarch/mm/tlb.c b/arch/loongarch/mm/tlb.c
index 5201a87937fe..742000b6d70c 100644
--- a/arch/loongarch/mm/tlb.c
+++ b/arch/loongarch/mm/tlb.c
@@ -250,15 +250,18 @@ static void output_pgtable_bits_defines(void)
 	pr_debug("\n");
 }
 
-void setup_tlb_handler(void)
-{
-	static int run_once = 0;
+#ifdef CONFIG_NUMA
+static unsigned long pcpu_handlers[NR_CPUS];
+#endif
+extern long exception_handlers[VECSIZE * 128 / sizeof(long)];
 
+void setup_tlb_handler(int cpu)
+{
 	setup_ptwalker();
 	output_pgtable_bits_defines();
 
 	/* The tlb handlers are generated only once */
-	if (!run_once) {
+	if (cpu == 0) {
 		memcpy((void *)tlbrentry, handle_tlb_refill, 0x80);
 		local_flush_icache_range(tlbrentry, tlbrentry + 0x80);
 		set_handler(EXCCODE_TLBI * VECSIZE, handle_tlb_load, VECSIZE);
@@ -268,15 +271,35 @@ void setup_tlb_handler(void)
 		set_handler(EXCCODE_TLBNR * VECSIZE, handle_tlb_protect, VECSIZE);
 		set_handler(EXCCODE_TLBNX * VECSIZE, handle_tlb_protect, VECSIZE);
 		set_handler(EXCCODE_TLBPE * VECSIZE, handle_tlb_protect, VECSIZE);
-		run_once++;
 	}
+#ifdef CONFIG_NUMA
+	else {
+		void *addr;
+		struct page *page;
+		const int vec_sz = sizeof(exception_handlers);
+
+		if (pcpu_handlers[cpu])
+			return;
+
+		page = alloc_pages_node(cpu_to_node(cpu), GFP_KERNEL, get_order(vec_sz));
+		if (!page)
+			return;
+
+		addr = page_address(page);
+		pcpu_handlers[cpu] = virt_to_phys(addr);
+		memcpy((void *)addr, (void *)eentry, vec_sz);
+		local_flush_icache_range((unsigned long)addr, (unsigned long)addr + vec_sz);
+		csr_writeq(pcpu_handlers[cpu], LOONGARCH_CSR_TLBRENTRY);
+		csr_writeq(pcpu_handlers[cpu] + 80*VECSIZE, LOONGARCH_CSR_TLBRENTRY);
+	}
+#endif
 }
 
-void tlb_init(void)
+void tlb_init(int cpu)
 {
 	write_csr_pagesize(PS_DEFAULT_SIZE);
 	write_csr_stlbpgsize(PS_DEFAULT_SIZE);
 	write_csr_tlbrefill_pagesize(PS_DEFAULT_SIZE);
-	setup_tlb_handler();
+	setup_tlb_handler(cpu);
 	local_flush_tlb_all();
 }
diff --git a/arch/loongarch/pci/acpi.c b/arch/loongarch/pci/acpi.c
index 7cabb8f37218..bf921487333c 100644
--- a/arch/loongarch/pci/acpi.c
+++ b/arch/loongarch/pci/acpi.c
@@ -11,6 +11,7 @@
 #include <linux/pci-ecam.h>
 
 #include <asm/pci.h>
+#include <asm/numa.h>
 #include <asm/loongson.h>
 
 struct pci_root_info {
@@ -27,8 +28,10 @@ int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
 {
 	struct pci_config_window *cfg = bridge->bus->sysdata;
 	struct acpi_device *adev = to_acpi_device(cfg->parent);
+	struct device *bus_dev = &bridge->bus->dev;
 
 	ACPI_COMPANION_SET(&bridge->dev, adev);
+	set_dev_node(bus_dev, pa_to_nid(cfg->res.start));
 
 	return 0;
 }
-- 
2.27.0


  parent reply	other threads:[~2022-05-18  9:59 UTC|newest]

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-18  9:25 [PATCH V11 00/22] arch: Add basic LoongArch support Huacai Chen
2022-05-18  9:25 ` [PATCH V11 01/22] Documentation: LoongArch: Add basic documentations Huacai Chen
2022-05-18 15:34   ` WANG Xuerui
2022-05-18  9:25 ` [PATCH V11 02/22] Documentation/zh_CN: Add basic LoongArch documentations Huacai Chen
2022-05-18 15:32   ` WANG Xuerui
2022-05-20  7:37   ` Guo Ren
2022-05-20  7:43     ` WANG Xuerui
2022-05-18  9:26 ` [PATCH V11 03/22] LoongArch: Add ELF-related definitions Huacai Chen
2022-05-18  9:26 ` [PATCH V11 04/22] LoongArch: Add writecombine support for drm Huacai Chen
2022-05-18  9:26   ` Huacai Chen
2022-05-18  9:26 ` [PATCH V11 05/22] LoongArch: Add build infrastructure Huacai Chen
2022-05-18 15:22   ` WANG Xuerui
2022-05-20  7:25   ` Guo Ren
2022-05-18  9:26 ` [PATCH V11 06/22] LoongArch: Add CPU definition headers Huacai Chen
2022-05-18 15:45   ` WANG Xuerui
2022-05-18 16:12     ` Huacai Chen
2022-05-18  9:26 ` [PATCH V11 07/22] LoongArch: Add atomic/locking headers Huacai Chen
2022-05-18 15:54   ` WANG Xuerui
2022-05-20  7:54   ` Guo Ren
2022-05-20  9:50     ` Huacai Chen
2022-05-20 18:14       ` Guo Ren
2022-05-21  1:55         ` Huacai Chen
2022-05-18  9:26 ` [PATCH V11 08/22] LoongArch: Add other common headers Huacai Chen
2022-05-18 16:04   ` WANG Xuerui
2022-05-18  9:26 ` [PATCH V11 09/22] LoongArch: Add boot and setup routines Huacai Chen
2022-05-18 15:17   ` WANG Xuerui
2022-05-18 16:08     ` Huacai Chen
2022-05-20  9:17   ` Ard Biesheuvel
2022-05-20  9:41     ` Javier Martinez Canillas
2022-05-20 14:09       ` Huacai Chen
2022-05-20 14:23         ` Javier Martinez Canillas
2022-05-20 15:19           ` Huacai Chen
2022-05-20 16:32             ` Javier Martinez Canillas
2022-05-21  1:40               ` Huacai Chen
2022-05-21  7:06                 ` Javier Martinez Canillas
2022-05-21  7:37                   ` Huacai Chen
2022-05-21  9:06                     ` Javier Martinez Canillas
2022-05-21  9:13                       ` Huacai Chen
2022-05-21  9:43                         ` Javier Martinez Canillas
2022-05-20 15:53     ` Huacai Chen
2022-05-24  8:27   ` Xi Ruoyao
2022-05-24 10:59     ` Huacai Chen
2022-05-24 12:48       ` 李超
2022-05-18  9:26 ` [PATCH V11 10/22] LoongArch: Add exception/interrupt handling Huacai Chen
2022-05-18  9:26 ` [PATCH V11 11/22] LoongArch: Add process management Huacai Chen
2022-05-18  9:26 ` [PATCH V11 12/22] LoongArch: Add memory management Huacai Chen
2022-05-18  9:26 ` [PATCH V11 13/22] LoongArch: Add system call support Huacai Chen
2022-05-18  9:26 ` [PATCH V11 14/22] LoongArch: Add signal handling support Huacai Chen
2022-05-18 16:13   ` WANG Xuerui
2022-05-18 16:39   ` Eric W. Biederman
2022-05-18 16:54     ` Huacai Chen
2022-05-18 17:17       ` WANG Xuerui
2022-05-18  9:26 ` [PATCH V11 15/22] LoongArch: Add ELF and module support Huacai Chen
2022-05-18  9:26 ` [PATCH V11 16/22] LoongArch: Add misc common routines Huacai Chen
2022-05-18  9:57 ` [PATCH V11 17/22] LoongArch: Add some library functions Huacai Chen
2022-05-18  9:57   ` [PATCH V11 18/22] LoongArch: Add PCI controller support Huacai Chen
2022-05-18  9:57   ` [PATCH V11 19/22] LoongArch: Add VDSO and VSYSCALL support Huacai Chen
2022-05-18  9:57   ` [PATCH V11 20/22] LoongArch: Add multi-processor (SMP) support Huacai Chen
2022-05-18  9:57   ` Huacai Chen [this message]
2022-05-18  9:57   ` [PATCH V11 22/22] LoongArch: Add Loongson-3 default config file Huacai Chen
2022-05-18 13:42 ` [PATCH V11 00/22] arch: Add basic LoongArch support Arnd Bergmann
2022-05-18 17:18   ` Huacai Chen
2022-05-18 22:36   ` Stephen Rothwell
2022-05-22  4:18 ` WANG Xuerui

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220518095709.1313120-5-chenhuacai@loongson.cn \
    --to=chenhuacai@loongson.cn \
    --cc=airlied@linux.ie \
    --cc=akpm@linux-foundation.org \
    --cc=arnd@arndb.de \
    --cc=chenhuacai@gmail.com \
    --cc=corbet@lwn.net \
    --cc=guoren@kernel.org \
    --cc=jiaxun.yang@flygoat.com \
    --cc=kernel@xen0n.name \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lixuefeng@loongson.cn \
    --cc=luto@kernel.org \
    --cc=peterz@infradead.org \
    --cc=sfr@canb.auug.org.au \
    --cc=siyanteng@loongson.cn \
    --cc=tglx@linutronix.de \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.