All of lore.kernel.org
 help / color / mirror / Atom feed
From: Luca Weiss <luca.weiss@fairphone.com>
To: linux-arm-msm@vger.kernel.org
Cc: ~postmarketos/upstreaming@lists.sr.ht,
	phone-devel@vger.kernel.org,
	Luca Weiss <luca.weiss@fairphone.com>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 5/5] arm64: dts: qcom: sm6350: Add interconnect support
Date: Fri, 20 May 2022 09:03:17 +0200	[thread overview]
Message-ID: <20220520070318.48521-6-luca.weiss@fairphone.com> (raw)
In-Reply-To: <20220520070318.48521-1-luca.weiss@fairphone.com>

Add all the different NoC providers that are found in SM6350 and
populate different nodes that use the interconnect properties.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
Changes since v1:
* Use #interconnect-cells = <2>, adjust everything accordingly

 arch/arm64/boot/dts/qcom/sm6350.dtsi | 109 +++++++++++++++++++++++++++
 1 file changed, 109 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index fb1a0f662575..119073f19285 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -1,11 +1,13 @@
 // SPDX-License-Identifier: BSD-3-Clause
 /*
  * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Luca Weiss <luca.weiss@fairphone.com>
  */
 
 #include <dt-bindings/clock/qcom,gcc-sm6350.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,sm6350.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
@@ -539,6 +541,10 @@ i2c0: i2c@880000 {
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				status = "disabled";
 			};
 
@@ -552,6 +558,10 @@ i2c2: i2c@888000 {
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				status = "disabled";
 			};
 		};
@@ -578,6 +588,10 @@ i2c6: i2c@980000 {
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				status = "disabled";
 			};
 
@@ -591,6 +605,10 @@ i2c7: i2c@984000 {
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				status = "disabled";
 			};
 
@@ -604,6 +622,10 @@ i2c8: i2c@988000 {
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				status = "disabled";
 			};
 
@@ -615,6 +637,9 @@ uart9: serial@98c000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart9_default>;
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -628,11 +653,62 @@ i2c10: i2c@990000 {
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				status = "disabled";
 			};
 
 		};
 
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sm6350-config-noc";
+			reg = <0 0x01500000 0 0x28000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sm6350-system-noc";
+			reg = <0 0x01620000 0 0x17080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			clk_virt: interconnect-clk-virt {
+				compatible = "qcom,sm6350-clk-virt";
+				#interconnect-cells = <2>;
+				qcom,bcm-voters = <&apps_bcm_voter>;
+			};
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm6350-aggre1-noc";
+			reg = <0 0x016e0000 0 0x15080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm6350-aggre2-noc";
+			reg = <0 0x01700000 0 0x1f880>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			compute_noc: interconnect-compute-noc {
+				compatible = "qcom,sm6350-compute-noc";
+				#interconnect-cells = <2>;
+				qcom,bcm-voters = <&apps_bcm_voter>;
+			};
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sm6350-mmss-noc";
+			reg = <0 0x01740000 0 0x1c100>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		ufs_mem_hc: ufs@1d84000 {
 			compatible = "qcom,sm6350-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
@@ -933,6 +1009,10 @@ sdhc_2: sdhci@8804000 {
 				 <&gcc GCC_SDCC2_APPS_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "iface", "core", "xo";
+			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &clk_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
+
 			qcom,dll-config = <0x0007642c>;
 			qcom,ddr-config = <0x80040868>;
 			power-domains = <&rpmhpd 0>;
@@ -947,11 +1027,15 @@ sdhc2_opp_table: sdhc2-opp-table {
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
 					required-opps = <&rpmhpd_opp_svs_l1>;
+					opp-peak-kBps = <790000 131000>;
+					opp-avg-kBps = <50000 50000>;
 				};
 
 				opp-202000000 {
 					opp-hz = /bits/ 64 <202000000>;
 					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <3190000 294000>;
+					opp-avg-kBps = <261438 300000>;
 				};
 			};
 		};
@@ -1017,12 +1101,33 @@ dp_phy: dp-phy@88ea200 {
 			};
 		};
 
+		dc_noc: interconnect@9160000 {
+			compatible = "qcom,sm6350-dc-noc";
+			reg = <0 0x09160000 0 0x3200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		system-cache-controller@9200000 {
 			compatible = "qcom,sm6350-llcc";
 			reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>;
 			reg-names = "llcc_base", "llcc_broadcast_base";
 		};
 
+		gem_noc: interconnect@9680000 {
+			compatible = "qcom,sm6350-gem-noc";
+			reg = <0 0x09680000 0 0x3e200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		npu_noc: interconnect@9990000 {
+			compatible = "qcom,sm6350-npu-noc";
+			reg = <0 0x09990000 0 0x1600>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		usb_1: usb@a6f8800 {
 			compatible = "qcom,sm6350-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
@@ -1051,6 +1156,10 @@ usb_1: usb@a6f8800 {
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
+			interconnects = <&aggre2_noc MASTER_USB3 0 &clk_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
 			usb_1_dwc3: usb@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xcd00>;
-- 
2.36.1


      parent reply	other threads:[~2022-05-20  7:05 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-20  7:03 [PATCH v2 0/5] Add interconnect support for SM6350 Luca Weiss
2022-05-20  7:03 ` [PATCH v2 1/5] interconnect: qcom: icc-rpmh: Support child NoC device probe Luca Weiss
2022-05-20  7:03 ` [PATCH v2 2/5] dt-bindings: interconnect: Add Qualcomm SM6350 NoC support Luca Weiss
2022-05-20 10:31   ` Krzysztof Kozlowski
2022-05-20 12:04     ` Luca Weiss
2022-05-20 14:24       ` Krzysztof Kozlowski
2022-05-23 14:32         ` Luca Weiss
2022-05-24 17:30           ` Krzysztof Kozlowski
2022-05-20  7:03 ` [PATCH v2 3/5] dt-bindings: interconnect: qcom: Reuse new rpmh-common bindings Luca Weiss
2022-05-20 10:33   ` Krzysztof Kozlowski
2022-05-20 11:42     ` Luca Weiss
2022-05-20  7:03 ` [PATCH v2 4/5] interconnect: qcom: Add SM6350 driver support Luca Weiss
2022-05-20  7:03 ` Luca Weiss [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220520070318.48521-6-luca.weiss@fairphone.com \
    --to=luca.weiss@fairphone.com \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.