From: Robert Marko <robert.marko@sartura.hr>
To: sr@denx.de, pali@kernel.org, marek.behun@nic.cz,
rfried.dev@gmail.com, u-boot@lists.denx.de
Cc: Robert Marko <robert.marko@sartura.hr>
Subject: [PATCH v4 1/3] arm: mvebu: dts: sync DTS
Date: Fri, 20 May 2022 13:12:29 +0200 [thread overview]
Message-ID: <20220520111231.2034416-1-robert.marko@sartura.hr> (raw)
Update the uDPU DTS to the version that is pending upstream [1][2][3][4].
[1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-4-robert.marko@sartura.hr/
[2] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-5-robert.marko@sartura.hr/
[3] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-6-robert.marko@sartura.hr/
[4] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-7-robert.marko@sartura.hr/
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
---
arch/arm/dts/armada-3720-uDPU.dts | 23 ++++++++++-------------
1 file changed, 10 insertions(+), 13 deletions(-)
diff --git a/arch/arm/dts/armada-3720-uDPU.dts b/arch/arm/dts/armada-3720-uDPU.dts
index 1f534c0c65..f21a855fc6 100644
--- a/arch/arm/dts/armada-3720-uDPU.dts
+++ b/arch/arm/dts/armada-3720-uDPU.dts
@@ -16,7 +16,7 @@
/ {
model = "Methode uDPU Board";
- compatible = "methode,udpu", "marvell,armada3720";
+ compatible = "methode,udpu", "marvell,armada3720", "marvell,armada3710";
chosen {
stdout-path = "serial0:115200n8";
@@ -28,35 +28,34 @@
};
leds {
- pinctrl-names = "default";
compatible = "gpio-leds";
- power1 {
+ led-power1 {
label = "udpu:green:power";
gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
};
- power2 {
+ led-power2 {
label = "udpu:red:power";
gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
};
- network1 {
+ led-network1 {
label = "udpu:green:network";
gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
};
- network2 {
+ led-network2 {
label = "udpu:red:network";
gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
};
- alarm1 {
+ led-alarm1 {
label = "udpu:green:alarm";
gpios = <&gpionb 15 GPIO_ACTIVE_LOW>;
};
- alarm2 {
+ led-alarm2 {
label = "udpu:red:alarm";
gpios = <&gpionb 16 GPIO_ACTIVE_LOW>;
};
@@ -99,7 +98,7 @@
pinctrl-names = "default";
pinctrl-0 = <&spi_quad_pins>;
- spi-flash@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <54000000>;
@@ -153,14 +152,12 @@
scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- nct375@48 {
- status = "okay";
+ temp-sensor@48 {
compatible = "ti,tmp75c";
reg = <0x48>;
};
- nct375@49 {
- status = "okay";
+ temp-sensor@49 {
compatible = "ti,tmp75c";
reg = <0x49>;
};
--
2.36.1
next reply other threads:[~2022-05-20 11:12 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-20 11:12 Robert Marko [this message]
2022-05-20 11:12 ` [PATCH v4 2/3] arm: mvebu: add support for Methode eDPU Robert Marko
2022-05-20 11:12 ` [PATCH v4 3/3] MAINTAINERS: add myself as Methode maintainer Robert Marko
2022-05-20 11:17 ` Stefan Roese
2022-05-20 11:26 ` Robert Marko
2022-05-20 11:27 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220520111231.2034416-1-robert.marko@sartura.hr \
--to=robert.marko@sartura.hr \
--cc=marek.behun@nic.cz \
--cc=pali@kernel.org \
--cc=rfried.dev@gmail.com \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.