All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alex Elder <elder@linaro.org>
To: davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
	pabeni@redhat.com
Cc: mka@chromium.org, evgreen@chromium.org,
	bjorn.andersson@linaro.org, quic_cpratapa@quicinc.com,
	quic_avuyyuru@quicinc.com, quic_jponduru@quicinc.com,
	quic_subashab@quicinc.com, elder@kernel.org,
	netdev@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH net-next v2 8/9] net: ipa: remove command info pool
Date: Sat, 21 May 2022 19:32:22 -0500	[thread overview]
Message-ID: <20220522003223.1123705-9-elder@linaro.org> (raw)
In-Reply-To: <20220522003223.1123705-1-elder@linaro.org>

The ipa_cmd_info structure now contains only one field, and it's an
enumerated type whose values all fit in 8 bits.  Currently we'll
never use more than 8 TREs in a command transaction, and we can
represent that number of command opcodes in the same space as a 64
bit pointer to an ipa_cmd_info structure.

Define IPA_COMMAND_TRANS_TRE_MAX as the maximum number of TREs that
can be in a command transaction.  Replace the info pointer in a
transaction with a fixed-size array named cmd_opcode[] of that many
bytes.  Store the opcode in this array when adding a command TRE to
a transaction, as was done previously for the info array.  This
makes the ipa_cmd_info unused, so get rid of it.

When committing an immediate command transaction, use the channel's
Boolean command flag to determine whether to fill in the opcode,
which will be taken (as before) from the array in the transaction.

This makes the command info pool unnecessary, so get rid of it.

Signed-off-by: Alex Elder <elder@linaro.org>
---
 drivers/net/ipa/gsi.h       |  1 -
 drivers/net/ipa/gsi_trans.c | 10 ++++-----
 drivers/net/ipa/gsi_trans.h |  7 +++++--
 drivers/net/ipa/ipa_cmd.c   | 41 ++++++++-----------------------------
 drivers/net/ipa/ipa_cmd.h   |  9 --------
 5 files changed, 18 insertions(+), 50 deletions(-)

diff --git a/drivers/net/ipa/gsi.h b/drivers/net/ipa/gsi.h
index 9cc6576588116..5d66116b46b03 100644
--- a/drivers/net/ipa/gsi.h
+++ b/drivers/net/ipa/gsi.h
@@ -84,7 +84,6 @@ struct gsi_trans_info {
 	struct gsi_trans_pool pool;	/* transaction pool */
 	struct gsi_trans_pool sg_pool;	/* scatterlist pool */
 	struct gsi_trans_pool cmd_pool;	/* command payload DMA pool */
-	struct gsi_trans_pool info_pool;/* command information pool */
 	struct gsi_trans **map;		/* TRE -> transaction map */
 
 	spinlock_t spinlock;		/* protects updates to the lists */
diff --git a/drivers/net/ipa/gsi_trans.c b/drivers/net/ipa/gsi_trans.c
index 472792992f866..55f8fe7d2668e 100644
--- a/drivers/net/ipa/gsi_trans.c
+++ b/drivers/net/ipa/gsi_trans.c
@@ -436,7 +436,7 @@ void gsi_trans_cmd_add(struct gsi_trans *trans, void *buf, u32 size,
 	sg_dma_address(sg) = addr;
 	sg_dma_len(sg) = size;
 
-	trans->info[which].opcode = opcode;
+	trans->cmd_opcode[which] = opcode;
 }
 
 /* Add a page transfer to a transaction.  It will fill the only TRE. */
@@ -552,10 +552,10 @@ static void __gsi_trans_commit(struct gsi_trans *trans, bool ring_db)
 	struct gsi_ring *ring = &channel->tre_ring;
 	enum ipa_cmd_opcode opcode = IPA_CMD_NONE;
 	bool bei = channel->toward_ipa;
-	struct ipa_cmd_info *info;
 	struct gsi_tre *dest_tre;
 	struct scatterlist *sg;
 	u32 byte_count = 0;
+	u8 *cmd_opcode;
 	u32 avail;
 	u32 i;
 
@@ -566,7 +566,7 @@ static void __gsi_trans_commit(struct gsi_trans *trans, bool ring_db)
 	 * If there is no info array we're doing a simple data
 	 * transfer request, whose opcode is IPA_CMD_NONE.
 	 */
-	info = trans->info ? &trans->info[0] : NULL;
+	cmd_opcode = channel->command ? &trans->cmd_opcode[0] : NULL;
 	avail = ring->count - ring->index % ring->count;
 	dest_tre = gsi_ring_virt(ring, ring->index);
 	for_each_sg(trans->sgl, sg, trans->used, i) {
@@ -577,8 +577,8 @@ static void __gsi_trans_commit(struct gsi_trans *trans, bool ring_db)
 		byte_count += len;
 		if (!avail--)
 			dest_tre = gsi_ring_virt(ring, 0);
-		if (info)
-			opcode = info++->opcode;
+		if (cmd_opcode)
+			opcode = *cmd_opcode++;
 
 		gsi_trans_tre_fill(dest_tre, addr, len, last_tre, bei, opcode);
 		dest_tre++;
diff --git a/drivers/net/ipa/gsi_trans.h b/drivers/net/ipa/gsi_trans.h
index 9a39909915ef5..99ce2cba0dc3c 100644
--- a/drivers/net/ipa/gsi_trans.h
+++ b/drivers/net/ipa/gsi_trans.h
@@ -22,6 +22,9 @@ struct gsi;
 struct gsi_trans;
 struct gsi_trans_pool;
 
+/* Maximum number of TREs in an IPA immediate command transaction */
+#define IPA_COMMAND_TRANS_TRE_MAX	8
+
 /**
  * struct gsi_trans - a GSI transaction
  *
@@ -34,8 +37,8 @@ struct gsi_trans_pool;
  * @used:	Number of TREs *used* (could be less than tre_count)
  * @len:	Total # of transfer bytes represented in sgl[] (set by core)
  * @data:	Preserved but not touched by the core transaction code
+ * @cmd_opcode:	Array of command opcodes (command channel only)
  * @sgl:	An array of scatter/gather entries managed by core code
- * @info:	Array of command information structures (command channel)
  * @direction:	DMA transfer direction (DMA_NONE for commands)
  * @refcount:	Reference count used for destruction
  * @completion:	Completed when the transaction completes
@@ -58,8 +61,8 @@ struct gsi_trans {
 	u32 len;			/* total # bytes across sgl[] */
 
 	void *data;
+	u8 cmd_opcode[IPA_COMMAND_TRANS_TRE_MAX];
 	struct scatterlist *sgl;
-	struct ipa_cmd_info *info;	/* array of entries, or null */
 	enum dma_data_direction direction;
 
 	refcount_t refcount;
diff --git a/drivers/net/ipa/ipa_cmd.c b/drivers/net/ipa/ipa_cmd.c
index 5fd74d7007044..e58cd4478fd3d 100644
--- a/drivers/net/ipa/ipa_cmd.c
+++ b/drivers/net/ipa/ipa_cmd.c
@@ -349,7 +349,6 @@ int ipa_cmd_pool_init(struct gsi_channel *channel, u32 tre_max)
 {
 	struct gsi_trans_info *trans_info = &channel->trans_info;
 	struct device *dev = channel->gsi->dev;
-	int ret;
 
 	/* This is as good a place as any to validate build constants */
 	ipa_cmd_validate_build();
@@ -358,20 +357,9 @@ int ipa_cmd_pool_init(struct gsi_channel *channel, u32 tre_max)
 	 * a single transaction can require up to tlv_count of them,
 	 * so we treat them as if that many can be allocated at once.
 	 */
-	ret = gsi_trans_pool_init_dma(dev, &trans_info->cmd_pool,
-				      sizeof(union ipa_cmd_payload),
-				      tre_max, channel->tlv_count);
-	if (ret)
-		return ret;
-
-	/* Each TRE needs a command info structure */
-	ret = gsi_trans_pool_init(&trans_info->info_pool,
-				   sizeof(struct ipa_cmd_info),
-				   tre_max, channel->tlv_count);
-	if (ret)
-		gsi_trans_pool_exit_dma(dev, &trans_info->cmd_pool);
-
-	return ret;
+	return gsi_trans_pool_init_dma(dev, &trans_info->cmd_pool,
+				       sizeof(union ipa_cmd_payload),
+				       tre_max, channel->tlv_count);
 }
 
 void ipa_cmd_pool_exit(struct gsi_channel *channel)
@@ -379,7 +367,6 @@ void ipa_cmd_pool_exit(struct gsi_channel *channel)
 	struct gsi_trans_info *trans_info = &channel->trans_info;
 	struct device *dev = channel->gsi->dev;
 
-	gsi_trans_pool_exit(&trans_info->info_pool);
 	gsi_trans_pool_exit_dma(dev, &trans_info->cmd_pool);
 }
 
@@ -652,28 +639,16 @@ void ipa_cmd_pipeline_clear_wait(struct ipa *ipa)
 	wait_for_completion(&ipa->completion);
 }
 
-static struct ipa_cmd_info *
-ipa_cmd_info_alloc(struct ipa_endpoint *endpoint, u32 tre_count)
-{
-	struct gsi_channel *channel;
-
-	channel = &endpoint->ipa->gsi.channel[endpoint->channel_id];
-
-	return gsi_trans_pool_alloc(&channel->trans_info.info_pool, tre_count);
-}
-
 /* Allocate a transaction for the command TX endpoint */
 struct gsi_trans *ipa_cmd_trans_alloc(struct ipa *ipa, u32 tre_count)
 {
 	struct ipa_endpoint *endpoint;
-	struct gsi_trans *trans;
+
+	if (WARN_ON(tre_count > IPA_COMMAND_TRANS_TRE_MAX))
+		return NULL;
 
 	endpoint = ipa->name_map[IPA_ENDPOINT_AP_COMMAND_TX];
 
-	trans = gsi_channel_trans_alloc(&ipa->gsi, endpoint->channel_id,
-					tre_count, DMA_NONE);
-	if (trans)
-		trans->info = ipa_cmd_info_alloc(endpoint, tre_count);
-
-	return trans;
+	return gsi_channel_trans_alloc(&ipa->gsi, endpoint->channel_id,
+				       tre_count, DMA_NONE);
 }
diff --git a/drivers/net/ipa/ipa_cmd.h b/drivers/net/ipa/ipa_cmd.h
index d4dbe2ce96dcd..9215ddad10107 100644
--- a/drivers/net/ipa/ipa_cmd.h
+++ b/drivers/net/ipa/ipa_cmd.h
@@ -46,15 +46,6 @@ enum ipa_cmd_opcode {
 	IPA_CMD_IP_PACKET_TAG_STATUS	= 0x14,
 };
 
-/**
- * struct ipa_cmd_info - information needed for an IPA immediate command
- *
- * @opcode:	The command opcode.
- */
-struct ipa_cmd_info {
-	enum ipa_cmd_opcode opcode;
-};
-
 /**
  * ipa_cmd_table_valid() - Validate a memory region holding a table
  * @ipa:	- IPA pointer
-- 
2.32.0


  parent reply	other threads:[~2022-05-22  0:32 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-22  0:32 [PATCH net-next v2 0/9] net: ipa: a few more small items Alex Elder
2022-05-22  0:32 ` [PATCH net-next v2 1/9] net: ipa: make endpoint HOLB drop configurable Alex Elder
2022-05-22  0:32 ` [PATCH net-next v2 2/9] net: ipa: support hard aggregation limits Alex Elder
2022-05-22  0:32 ` [PATCH net-next v2 3/9] net: ipa: specify RX aggregation time limit in config data Alex Elder
2022-05-22  0:32 ` [PATCH net-next v2 4/9] net: ipa: kill gsi_trans_commit_wait_timeout() Alex Elder
2022-05-22  0:32 ` [PATCH net-next v2 5/9] net: ipa: count the number of modem TX endpoints Alex Elder
2022-05-22  0:32 ` [PATCH net-next v2 6/9] net: ipa: get rid of ipa_cmd_info->direction Alex Elder
2022-05-22  0:32 ` [PATCH net-next v2 7/9] net: ipa: remove command direction argument Alex Elder
2022-05-22  0:32 ` Alex Elder [this message]
2022-05-22  0:32 ` [PATCH net-next v2 9/9] net: ipa: use data space for command opcodes Alex Elder
2022-05-22 20:00 ` [PATCH net-next v2 0/9] net: ipa: a few more small items patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220522003223.1123705-9-elder@linaro.org \
    --to=elder@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=elder@kernel.org \
    --cc=evgreen@chromium.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=quic_avuyyuru@quicinc.com \
    --cc=quic_cpratapa@quicinc.com \
    --cc=quic_jponduru@quicinc.com \
    --cc=quic_subashab@quicinc.com \
    --subject='Re: [PATCH net-next v2 8/9] net: ipa: remove command info pool' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.