All of lore.kernel.org
 help / color / mirror / Atom feed
From: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
To: jic23@kernel.org, lars@metafoo.de, robh+dt@kernel.org,
	tomas.melin@vaisala.com, andy.shevchenko@gmail.com,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Qing-wu.Li@leica-geosystems.com.cn
Cc: linux-iio@vger.kernel.org
Subject: [PATCH V7 5/5] iio: accel: sca3300: Add inclination channels
Date: Sun, 22 May 2022 07:04:19 +0000	[thread overview]
Message-ID: <20220522070419.409556-6-Qing-wu.Li@leica-geosystems.com.cn> (raw)
In-Reply-To: <20220522070419.409556-1-Qing-wu.Li@leica-geosystems.com.cn>

Different from SCA3300, SCL3300 can output inclination angles.
Angles are formed from acceleration with following equations:
ANG_X = atan2(accx , sqrt(pow(accy , 2) + pow(accz , 2)))
ANG_Y = atan2(accy , sqrt(pow(accx , 2) + pow(accz , 2)))
ANG_Z = atan2(accz , sqrt(pow(accx , 2) + pow(accy , 2)))

The commit adds the output of the raw value, scale
and scale_available of angles.

New interfaces:
  in_incli_scale
  in_incli_scale_available
  in_incli_x_raw
  in_incli_y_raw
  in_incli_z_raw
Data converted by application of scale to degrees.

Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
---
 drivers/iio/accel/sca3300.c | 76 +++++++++++++++++++++++++++++++++++--
 1 file changed, 73 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/accel/sca3300.c b/drivers/iio/accel/sca3300.c
index 10bedb14d4f0..9094f16458de 100644
--- a/drivers/iio/accel/sca3300.c
+++ b/drivers/iio/accel/sca3300.c
@@ -44,12 +44,18 @@
 #define SCA3300_VALUE_RS_ERROR	0x3
 #define SCA3300_MASK_RS_STATUS	GENMASK(1, 0)
 
+#define SCL3300_REG_ANG_CTRL 0x0C
+#define SCL3300_ANG_ENABLE   0x1F
+
 enum sca3300_scan_indexes {
 	SCA3300_ACC_X = 0,
 	SCA3300_ACC_Y,
 	SCA3300_ACC_Z,
 	SCA3300_TEMP,
 	SCA3300_TIMESTAMP,
+	SCA3300_INCLI_X,
+	SCA3300_INCLI_Y,
+	SCA3300_INCLI_Z,
 };
 
 #define SCA3300_ACCEL_CHANNEL(index, reg, axis) {			\
@@ -73,6 +79,24 @@ enum sca3300_scan_indexes {
 	},								\
 }
 
+#define SCA3300_INCLI_CHANNEL(index, reg, axis) {			\
+	.type = IIO_INCLI,						\
+	.address = reg,							\
+	.modified = 1,							\
+	.channel2 = IIO_MOD_##axis,					\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),		\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),			\
+	.info_mask_shared_by_type_available =				\
+	BIT(IIO_CHAN_INFO_SCALE),					\
+	.scan_index = index,						\
+	.scan_type = {							\
+		.sign = 's',						\
+		.realbits = 16,						\
+		.storagebits = 16,					\
+		.endianness = IIO_CPU,					\
+	},								\
+}
+
 #define SCA3300_TEMP_CHANNEL(index, reg) {				\
 		.type = IIO_TEMP,					\
 		.address = reg,						\
@@ -106,15 +130,36 @@ static const int sca3300_accel_scale_map[] = {0, 1, 2, 2};
 static const int scl3300_accel_scale[][2] = {{0, 167}, {0, 333}, {0, 83}};
 static const int scl3300_accel_scale_map[] = {0, 1, 2};
 
+static const int scl3300_incli_scale[][2] = {{0, 5495}};
+static const int scl3300_incli_scale_map[] = {0, 0, 0};
+
 static const int sca3300_avail_modes_map[] = {0, 1, 2, 3};
 static const int scl3300_avail_modes_map[] = {0, 1, 3};
 
+static const struct iio_chan_spec scl3300_channels[] = {
+	SCA3300_ACCEL_CHANNEL(SCA3300_ACC_X, 0x1, X),
+	SCA3300_ACCEL_CHANNEL(SCA3300_ACC_Y, 0x2, Y),
+	SCA3300_ACCEL_CHANNEL(SCA3300_ACC_Z, 0x3, Z),
+	SCA3300_TEMP_CHANNEL(SCA3300_TEMP, 0x05),
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+	SCA3300_INCLI_CHANNEL(SCA3300_INCLI_X, 0x09, X),
+	SCA3300_INCLI_CHANNEL(SCA3300_INCLI_Y, 0x0A, Y),
+	SCA3300_INCLI_CHANNEL(SCA3300_INCLI_Z, 0x0B, Z),
+};
+
 static const unsigned long sca3300_scan_masks[] = {
 	BIT(SCA3300_ACC_X) | BIT(SCA3300_ACC_Y) | BIT(SCA3300_ACC_Z) |
 	BIT(SCA3300_TEMP),
 	0
 };
 
+static const unsigned long scl3300_scan_masks[] = {
+	BIT(SCA3300_ACC_X) | BIT(SCA3300_ACC_Y) | BIT(SCA3300_ACC_Z) |
+	BIT(SCA3300_TEMP) |
+	BIT(SCA3300_INCLI_X) | BIT(SCA3300_INCLI_Y) | BIT(SCA3300_INCLI_Z),
+	0
+};
+
 struct sca3300_chip_info {
 	const char *name;
 	const unsigned long *scan_masks;
@@ -123,6 +168,9 @@ struct sca3300_chip_info {
 	u8 num_accel_scales;
 	const int (*accel_scale)[2];
 	const int *accel_scale_map;
+	const int (*incli_scale)[2];
+	const int *incli_scale_map;
+	u8 num_incli_scales;
 	u8 num_freqs;
 	const int *freq_table;
 	const int *freq_map;
@@ -131,6 +179,7 @@ struct sca3300_chip_info {
 	u8 chip_id;
 };
 
+
 /**
  * struct sca3300_data - device data
  * @spi: SPI device structure
@@ -168,12 +217,16 @@ static const struct sca3300_chip_info sca3300_chip_tbl[] = {
 		.num_avail_modes = 4,
 		.chip_id = SCA3300_WHOAMI_ID,
 	},
-	{	.scan_masks = sca3300_scan_masks,
-		.channels = sca3300_channels,
-		.num_channels = ARRAY_SIZE(sca3300_channels),
+	{
+		.scan_masks = scl3300_scan_masks,
+		.channels = scl3300_channels,
+		.num_channels = ARRAY_SIZE(scl3300_channels),
 		.num_accel_scales = ARRAY_SIZE(scl3300_accel_scale)*2,
 		.accel_scale = scl3300_accel_scale,
 		.accel_scale_map = scl3300_accel_scale_map,
+		.incli_scale = scl3300_incli_scale,
+		.incli_scale_map = scl3300_incli_scale_map,
+		.num_incli_scales =  ARRAY_SIZE(scl3300_incli_scale)*2,
 		.num_freqs = ARRAY_SIZE(scl3300_lp_freq),
 		.freq_table = scl3300_lp_freq,
 		.freq_map = scl3300_lp_freq_map,
@@ -400,6 +453,11 @@ static int sca3300_read_raw(struct iio_dev *indio_dev,
 		if (ret)
 			return ret;
 		switch (chan->type) {
+		case IIO_INCLI:
+			index = data->chip->incli_scale_map[index];
+			*val  = data->chip->incli_scale[index][0];
+			*val2 = data->chip->incli_scale[index][1];
+			return IIO_VAL_INT_PLUS_MICRO;
 		case IIO_ACCEL:
 			index = data->chip->accel_scale_map[index];
 			*val  = data->chip->accel_scale[index][0];
@@ -486,6 +544,13 @@ static int sca3300_init(struct sca3300_data *sca_data,
 
 	sca_data->chip = &sca3300_chip_tbl[i];
 
+	if (value == SCL3300_WHOAMI_ID) {
+		ret = sca3300_write_reg(sca_data, SCL3300_REG_ANG_CTRL,
+					SCL3300_ANG_ENABLE);
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 }
 
@@ -521,6 +586,11 @@ static int sca3300_read_avail(struct iio_dev *indio_dev,
 	switch (mask) {
 	case IIO_CHAN_INFO_SCALE:
 		switch (chan->type) {
+		case IIO_INCLI:
+			*vals = (const int *)data->chip->incli_scale;
+			*length = data->chip->num_incli_scales;
+			*type = IIO_VAL_INT_PLUS_MICRO;
+			return IIO_AVAIL_LIST;
 		case IIO_ACCEL:
 			*vals = (const int *)data->chip->accel_scale;
 			*length = data->chip->num_accel_scales;
-- 
2.25.1


  parent reply	other threads:[~2022-05-22  7:04 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-22  7:04 [PATCH V7 0/5] iio: accel: sca3300: add compatible for scl3300 LI Qingwu
2022-05-22  7:04 ` [PATCH V7 1/5] dt-bindings: iio: accel: sca3300: Document murata,scl3300 LI Qingwu
2022-05-22  7:04 ` [PATCH V7 2/5] iio: accel: sca3300: add define for temp channel for reuse LI Qingwu
2022-05-22  7:04 ` [PATCH V7 3/5] iio: accel: sca3300: modified to support multi chips LI Qingwu
2022-05-22  7:04 ` [PATCH V7 4/5] iio: accel: sca3300: Add support for SCL3300 LI Qingwu
2022-05-22  7:48   ` Christophe JAILLET
2022-05-22 11:12   ` Jonathan Cameron
2022-05-22  7:04 ` LI Qingwu [this message]
2022-05-22 11:17   ` [PATCH V7 5/5] iio: accel: sca3300: Add inclination channels Jonathan Cameron
2022-05-22 13:23     ` LI Qingwu
2022-05-23  3:14       ` LI Qingwu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220522070419.409556-6-Qing-wu.Li@leica-geosystems.com.cn \
    --to=qing-wu.li@leica-geosystems.com.cn \
    --cc=andy.shevchenko@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=tomas.melin@vaisala.com \
    --subject='Re: [PATCH V7 5/5] iio: accel: sca3300: Add inclination channels' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.