All of lore.kernel.org
 help / color / mirror / Atom feed
From: Luca Weiss <luca@z3ntu.xyz>
To: linux-arm-msm@vger.kernel.org
Cc: ~postmarketos/upstreaming@lists.sr.ht,
	phone-devel@vger.kernel.org,
	Loic Poulain <loic.poulain@linaro.org>,
	Robert Foss <robert.foss@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Todor Tomov <todor.too@gmail.com>, Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
	matti.lehtimaki@gmail.com, Luca Weiss <luca@z3ntu.xyz>
Subject: [RFC PATCH 12/14] ARM: dts: qcom: msm8974: add CAMSS node
Date: Sun, 22 May 2022 18:28:00 +0200	[thread overview]
Message-ID: <20220522162802.208275-13-luca@z3ntu.xyz> (raw)
In-Reply-To: <20220522162802.208275-1-luca@z3ntu.xyz>

Add a node for the camera subsystem found on msm8974.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 arch/arm/boot/dts/qcom-msm8974.dtsi | 122 ++++++++++++++++++++++++++++
 1 file changed, 122 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index a80b4ae71745..e684a9229f8c 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1615,6 +1615,128 @@ dsi0_phy: dsi-phy@fd922a00 {
 			};
 		};
 
+		camss: camss@fda00000 {
+			compatible = "qcom,msm8974-camss";
+			reg = <0xfda0ac00 0x200>,
+			      <0xfda00030 0x4>,
+			      <0xfda0b000 0x200>,
+			      <0xfda00038 0x4>,
+			      <0xfda0b400 0x200>,
+			      <0xfda00040 0x4>,
+			      <0xfda08000 0x100>,
+			      <0xfda08400 0x100>,
+			      <0xfda08800 0x100>,
+			      <0xfda08c00 0x100>,
+			      <0xfda0a000 0x800>,
+			      <0xfda00020 0x10>,
+			      <0xfda10000 0x1000>,
+			      <0xfda14000 0x1000>;
+			reg-names = "csiphy0",
+				    "csiphy0_clk_mux",
+				    "csiphy1",
+				    "csiphy1_clk_mux",
+				    "csiphy2",
+				    "csiphy2_clk_mux",
+				    "csid0",
+				    "csid1",
+				    "csid2",
+				    "csid3",
+				    "ispif",
+				    "csi_clk_mux",
+				    "vfe0",
+				    "vfe1";
+			interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 53 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 54 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "csid0",
+					  "csid1",
+					  "csid2",
+					  "csid3",
+					  "ispif",
+					  "vfe0",
+					  "vfe1";
+			power-domains = <&mmcc CAMSS_VFE_GDSC>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_ISPIF_AHB_CLK>,
+				 <&mmcc CAMSS_PHY0_CSI0PHYTIMER_CLK>,
+				 <&mmcc CAMSS_PHY1_CSI1PHYTIMER_CLK>,
+				 <&mmcc CAMSS_PHY2_CSI2PHYTIMER_CLK>,
+				 <&mmcc CAMSS_CSI0_AHB_CLK>,
+				 <&mmcc CAMSS_CSI0_CLK>,
+				 <&mmcc CAMSS_CSI0PHY_CLK>,
+				 <&mmcc CAMSS_CSI0PIX_CLK>,
+				 <&mmcc CAMSS_CSI0RDI_CLK>,
+				 <&mmcc CAMSS_CSI1_AHB_CLK>,
+				 <&mmcc CAMSS_CSI1_CLK>,
+				 <&mmcc CAMSS_CSI1PHY_CLK>,
+				 <&mmcc CAMSS_CSI1PIX_CLK>,
+				 <&mmcc CAMSS_CSI1RDI_CLK>,
+				 <&mmcc CAMSS_CSI2_AHB_CLK>,
+				 <&mmcc CAMSS_CSI2_CLK>,
+				 <&mmcc CAMSS_CSI2PHY_CLK>,
+				 <&mmcc CAMSS_CSI2PIX_CLK>,
+				 <&mmcc CAMSS_CSI2RDI_CLK>,
+				 <&mmcc CAMSS_CSI3_AHB_CLK>,
+				 <&mmcc CAMSS_CSI3_CLK>,
+				 <&mmcc CAMSS_CSI3PHY_CLK>,
+				 <&mmcc CAMSS_CSI3PIX_CLK>,
+				 <&mmcc CAMSS_CSI3RDI_CLK>,
+				 <&mmcc CAMSS_VFE_VFE0_CLK>,
+				 <&mmcc CAMSS_VFE_VFE1_CLK>,
+				 <&mmcc CAMSS_CSI_VFE0_CLK>,
+				 <&mmcc CAMSS_CSI_VFE1_CLK>,
+				 <&mmcc CAMSS_VFE_VFE_AHB_CLK>,
+				 <&mmcc CAMSS_VFE_VFE_AXI_CLK>;
+			clock-names = "top_ahb",
+				      "ispif_ahb",
+				      "csiphy0_timer",
+				      "csiphy1_timer",
+				      "csiphy2_timer",
+				      "csi0_ahb",
+				      "csi0",
+				      "csi0_phy",
+				      "csi0_pix",
+				      "csi0_rdi",
+				      "csi1_ahb",
+				      "csi1",
+				      "csi1_phy",
+				      "csi1_pix",
+				      "csi1_rdi",
+				      "csi2_ahb",
+				      "csi2",
+				      "csi2_phy",
+				      "csi2_pix",
+				      "csi2_rdi",
+				      "csi3_ahb",
+				      "csi3",
+				      "csi3_phy",
+				      "csi3_pix",
+				      "csi3_rdi",
+				      "vfe0",
+				      "vfe1",
+				      "csi_vfe0",
+				      "csi_vfe1",
+				      "iface",
+				      "bus";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		cci: cci@fda0c000 {
 			compatible = "qcom,msm8974-cci";
 			#address-cells = <1>;
-- 
2.36.0


  parent reply	other threads:[~2022-05-22 16:28 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-22 16:27 [RFC PATCH 00/14] CAMSS support for MSM8974 Luca Weiss
2022-05-22 16:27 ` [RFC PATCH 01/14] media: dt-bindings: media: camss: Add qcom,msm8974-camss binding Luca Weiss
2022-05-23 10:07   ` Krzysztof Kozlowski
2022-06-02 13:01     ` Rob Herring
2022-05-22 16:27 ` [RFC PATCH 02/14] media: camss: Add CAMSS_8x74 camss version Luca Weiss
2022-05-26 12:32   ` Robert Foss
2022-05-22 16:27 ` [RFC PATCH 03/14] media: camss: vfe: Add support for 8x74 Luca Weiss
2022-05-26 12:36   ` Robert Foss
2022-05-22 16:27 ` [RFC PATCH 04/14] media: camss: video: " Luca Weiss
2022-05-26 12:37   ` Robert Foss
2022-05-22 16:27 ` [RFC PATCH 05/14] media: camss: csid: " Luca Weiss
2022-05-26 12:38   ` Robert Foss
2022-05-22 16:27 ` [RFC PATCH 06/14] media: camss: ispif: " Luca Weiss
2022-05-26 12:39   ` Robert Foss
2022-05-22 16:27 ` [RFC PATCH 07/14] media: camss: csiphy: " Luca Weiss
2022-05-26 12:40   ` Robert Foss
2022-05-22 16:27 ` [RFC PATCH 08/14] media: camss: Add 8x74 resources Luca Weiss
2022-05-26 12:42   ` Robert Foss
2022-05-22 16:27 ` [RFC PATCH 09/14] dt-bindings: i2c: qcom-cci: add QCOM MSM8974 compatible Luca Weiss
2022-05-23 10:07   ` Krzysztof Kozlowski
2022-05-22 16:27 ` [RFC PATCH 10/14] i2c: qcom-cci: add msm8974 compatible Luca Weiss
2022-06-14 20:20   ` Wolfram Sang
2022-06-15 17:13     ` Loic Poulain
2022-06-15 17:11   ` Loic Poulain
2022-05-22 16:27 ` [RFC PATCH 11/14] ARM: dts: qcom: msm8974: add CCI bus Luca Weiss
2022-05-26 12:16   ` Robert Foss
2022-05-22 16:28 ` Luca Weiss [this message]
2022-05-22 16:28 ` [RFC PATCH 13/14] ARM: dts: qcom: msm8974-FP2: Add OV8865 rear camera Luca Weiss
2022-05-22 16:28 ` [RFC PATCH 14/14] [DNM] media: camss: hacks for MSM8974 Luca Weiss
2022-05-23 12:39 ` [RFC PATCH 00/14] CAMSS support " Dmitry Baryshkov
2022-05-23 18:30   ` Brian Masney

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220522162802.208275-13-luca@z3ntu.xyz \
    --to=luca@z3ntu.xyz \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=loic.poulain@linaro.org \
    --cc=matti.lehtimaki@gmail.com \
    --cc=mchehab@kernel.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=robert.foss@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=todor.too@gmail.com \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    --subject='Re: [RFC PATCH 12/14] ARM: dts: qcom: msm8974: add CAMSS node' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.