All of lore.kernel.org
 help / color / mirror / Atom feed
From: Siddharth Vadapalli <s-vadapalli@ti.com>
To: <davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
	<pabeni@redhat.com>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <linux@armlinux.org.uk>,
	<vladimir.oltean@nxp.com>, <grygorii.strashko@ti.com>,
	<vigneshr@ti.com>, <nsekhar@ti.com>
Cc: <netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <kishon@ti.com>,
	Siddharth Vadapalli <s-vadapalli@ti.com>
Subject: [PATCH v2 1/3] dt-bindings: net: ti: k3-am654-cpsw-nuss: Update bindings for J7200 CPSW5G
Date: Thu, 2 Jun 2022 17:15:56 +0530	[thread overview]
Message-ID: <20220602114558.6204-2-s-vadapalli@ti.com> (raw)
In-Reply-To: <20220602114558.6204-1-s-vadapalli@ti.com>

Update bindings for TI K3 J7200 SoC which contains 5 ports (4 external
ports) CPSW5G module and add compatible for it.

Changes made:
    - Add new compatible ti,j7200-cpswxg-nuss for CPSW5G.
    - Extend pattern properties for new compatible.
    - Change maximum number of CPSW ports to 4 for new compatible.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
 .../bindings/net/ti,k3-am654-cpsw-nuss.yaml   | 140 ++++++++++++------
 1 file changed, 98 insertions(+), 42 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
index b8281d8be940..ec57bde7ac26 100644
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
@@ -57,6 +57,7 @@ properties:
       - ti,am654-cpsw-nuss
       - ti,j721e-cpsw-nuss
       - ti,am642-cpsw-nuss
+      - ti,j7200-cpswxg-nuss
 
   reg:
     maxItems: 1
@@ -108,48 +109,103 @@ properties:
         const: 1
       '#size-cells':
         const: 0
-
-    patternProperties:
-      port@[1-2]:
-        type: object
-        description: CPSWxG NUSS external ports
-
-        $ref: ethernet-controller.yaml#
-
-        properties:
-          reg:
-            minimum: 1
-            maximum: 2
-            description: CPSW port number
-
-          phys:
-            maxItems: 1
-            description: phandle on phy-gmii-sel PHY
-
-          label:
-            description: label associated with this port
-
-          ti,mac-only:
-            $ref: /schemas/types.yaml#/definitions/flag
-            description:
-              Specifies the port works in mac-only mode.
-
-          ti,syscon-efuse:
-            $ref: /schemas/types.yaml#/definitions/phandle-array
-            items:
-              - items:
-                  - description: Phandle to the system control device node which
-                      provides access to efuse
-                  - description: offset to efuse registers???
-            description:
-              Phandle to the system control device node which provides access
-              to efuse IO range with MAC addresses
-
-        required:
-          - reg
-          - phys
-
-    additionalProperties: false
+    allOf:
+      - if:
+          properties:
+            compatible:
+              contains:
+                enum:
+                  - ti,am654-cpsw-nuss
+                  - ti,j721e-cpsw-nuss
+                  - ti,am642-cpsw-nuss
+        then:
+          patternProperties:
+            port@[1-2]:
+              type: object
+              description: CPSWxG NUSS external ports
+
+              $ref: ethernet-controller.yaml#
+
+              properties:
+                reg:
+                  minimum: 1
+                  maximum: 2
+                  description: CPSW port number
+
+                phys:
+                  maxItems: 1
+                  description: phandle on phy-gmii-sel PHY
+
+                label:
+                  description: label associated with this port
+
+                ti,mac-only:
+                  $ref: /schemas/types.yaml#/definitions/flag
+                  description:
+                    Specifies the port works in mac-only mode.
+
+                ti,syscon-efuse:
+                  $ref: /schemas/types.yaml#/definitions/phandle-array
+                  items:
+                    - items:
+                        - description: Phandle to the system control device node which
+                            provides access to efuse
+                        - description: offset to efuse registers???
+                  description:
+                    Phandle to the system control device node which provides access
+                    to efuse IO range with MAC addresses
+
+              required:
+                - reg
+                - phys
+      - if:
+          properties:
+            compatible:
+              contains:
+                enum:
+                  - ti,j7200-cpswxg-nuss
+        then:
+          patternProperties:
+            port@[1-4]:
+              type: object
+              description: CPSWxG NUSS external ports
+
+              $ref: ethernet-controller.yaml#
+
+              properties:
+                reg:
+                  minimum: 1
+                  maximum: 4
+                  description: CPSW port number
+
+                phys:
+                  maxItems: 1
+                  description: phandle on phy-gmii-sel PHY
+
+                label:
+                  description: label associated with this port
+
+                ti,mac-only:
+                  $ref: /schemas/types.yaml#/definitions/flag
+                  description:
+                    Specifies the port works in mac-only mode.
+
+                ti,syscon-efuse:
+                  $ref: /schemas/types.yaml#/definitions/phandle-array
+                  items:
+                    - items:
+                        - description: Phandle to the system control device node which
+                            provides access to efuse
+                        - description: offset to efuse registers???
+                  description:
+                    Phandle to the system control device node which provides access
+                    to efuse IO range with MAC addresses
+
+              required:
+                - reg
+                - phys
+
+  additionalProperties: false
 
 patternProperties:
   "^mdio@[0-9a-f]+$":
-- 
2.36.1


  reply	other threads:[~2022-06-02 11:47 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-02 11:45 [PATCH v2 0/3] J7200: CPSW5G: Add support for QSGMII mode to am65-cpsw driver Siddharth Vadapalli
2022-06-02 11:45 ` Siddharth Vadapalli [this message]
2022-06-05 22:43   ` [PATCH v2 1/3] dt-bindings: net: ti: k3-am654-cpsw-nuss: Update bindings for J7200 CPSW5G Rob Herring
2022-06-06  6:20     ` Siddharth Vadapalli
2022-06-02 11:45 ` [PATCH v2 2/3] net: ethernet: ti: am65-cpsw: Add support " Siddharth Vadapalli
2022-06-02 11:45 ` [PATCH v2 3/3] net: ethernet: ti: am65-cpsw: Move phy_set_mode_ext() to correct location Siddharth Vadapalli
2022-06-03  2:48 ` [PATCH v2 0/3] J7200: CPSW5G: Add support for QSGMII mode to am65-cpsw driver Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220602114558.6204-2-s-vadapalli@ti.com \
    --to=s-vadapalli@ti.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=grygorii.strashko@ti.com \
    --cc=kishon@ti.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=nsekhar@ti.com \
    --cc=pabeni@redhat.com \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.