All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Pearson <markpearson@lenovo.com>
To: <markpearson@lenovo.com>
Cc: <hdegoede@redhat.com>, <markgross@kernel.org>,
	<platform-driver-x86@vger.kernel.org>,
	Mario Limonciello <mario.limonciello@amd.com>
Subject: [PATCH 1/4] platform/x86: thinkpad-acpi: profile capabilities as integer
Date: Fri, 3 Jun 2022 13:02:09 -0400	[thread overview]
Message-ID: <20220603170212.164963-1-markpearson@lenovo.com> (raw)
In-Reply-To: <markpearson@lenovo.com>

Currently the active mode (PSC/MMC) is stored in an enum and queried
throughout the driver.

Other driver changes will enumerate additional submodes that are relevant
to be tracked, so instead track PSC/MMC in a single integer variable.

Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
---
 drivers/platform/x86/thinkpad_acpi.c | 45 +++++++++++-----------------
 1 file changed, 18 insertions(+), 27 deletions(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index e6cb4a14cdd4..5d1e0a3a5c1e 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -10299,21 +10299,15 @@ static struct ibm_struct proxsensor_driver_data = {
 #define DYTC_DISABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_MMC_BALANCE, 0)
 #define DYTC_ENABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_MMC_BALANCE, 1)
 
-enum dytc_profile_funcmode {
-	DYTC_FUNCMODE_NONE = 0,
-	DYTC_FUNCMODE_MMC,
-	DYTC_FUNCMODE_PSC,
-};
-
-static enum dytc_profile_funcmode dytc_profile_available;
 static enum platform_profile_option dytc_current_profile;
 static atomic_t dytc_ignore_event = ATOMIC_INIT(0);
 static DEFINE_MUTEX(dytc_mutex);
+static int dytc_capabilities;
 static bool dytc_mmc_get_available;
 
 static int convert_dytc_to_profile(int dytcmode, enum platform_profile_option *profile)
 {
-	if (dytc_profile_available == DYTC_FUNCMODE_MMC) {
+	if (dytc_capabilities & BIT(DYTC_FC_MMC)) {
 		switch (dytcmode) {
 		case DYTC_MODE_MMC_LOWPOWER:
 			*profile = PLATFORM_PROFILE_LOW_POWER;
@@ -10330,7 +10324,7 @@ static int convert_dytc_to_profile(int dytcmode, enum platform_profile_option *p
 		}
 		return 0;
 	}
-	if (dytc_profile_available == DYTC_FUNCMODE_PSC) {
+	if (dytc_capabilities & BIT(DYTC_FC_PSC)) {
 		switch (dytcmode) {
 		case DYTC_MODE_PSC_LOWPOWER:
 			*profile = PLATFORM_PROFILE_LOW_POWER;
@@ -10352,21 +10346,21 @@ static int convert_profile_to_dytc(enum platform_profile_option profile, int *pe
 {
 	switch (profile) {
 	case PLATFORM_PROFILE_LOW_POWER:
-		if (dytc_profile_available == DYTC_FUNCMODE_MMC)
+		if (dytc_capabilities & BIT(DYTC_FC_MMC))
 			*perfmode = DYTC_MODE_MMC_LOWPOWER;
-		else if (dytc_profile_available == DYTC_FUNCMODE_PSC)
+		else if (dytc_capabilities & BIT(DYTC_FC_PSC))
 			*perfmode = DYTC_MODE_PSC_LOWPOWER;
 		break;
 	case PLATFORM_PROFILE_BALANCED:
-		if (dytc_profile_available == DYTC_FUNCMODE_MMC)
+		if (dytc_capabilities & BIT(DYTC_FC_MMC))
 			*perfmode = DYTC_MODE_MMC_BALANCE;
-		else if (dytc_profile_available == DYTC_FUNCMODE_PSC)
+		else if (dytc_capabilities & BIT(DYTC_FC_PSC))
 			*perfmode = DYTC_MODE_PSC_BALANCE;
 		break;
 	case PLATFORM_PROFILE_PERFORMANCE:
-		if (dytc_profile_available == DYTC_FUNCMODE_MMC)
+		if (dytc_capabilities & BIT(DYTC_FC_MMC))
 			*perfmode = DYTC_MODE_MMC_PERFORM;
-		else if (dytc_profile_available == DYTC_FUNCMODE_PSC)
+		else if (dytc_capabilities & BIT(DYTC_FC_PSC))
 			*perfmode = DYTC_MODE_PSC_PERFORM;
 		break;
 	default: /* Unknown profile */
@@ -10445,7 +10439,7 @@ static int dytc_profile_set(struct platform_profile_handler *pprof,
 	if (err)
 		goto unlock;
 
-	if (dytc_profile_available == DYTC_FUNCMODE_MMC) {
+	if (dytc_capabilities & BIT(DYTC_FC_MMC)) {
 		if (profile == PLATFORM_PROFILE_BALANCED) {
 			/*
 			 * To get back to balanced mode we need to issue a reset command.
@@ -10464,7 +10458,7 @@ static int dytc_profile_set(struct platform_profile_handler *pprof,
 				goto unlock;
 		}
 	}
-	if (dytc_profile_available == DYTC_FUNCMODE_PSC) {
+	if (dytc_capabilities & BIT(DYTC_FC_PSC)) {
 		err = dytc_command(DYTC_SET_COMMAND(DYTC_FUNCTION_PSC, perfmode, 1), &output);
 		if (err)
 			goto unlock;
@@ -10483,12 +10477,12 @@ static void dytc_profile_refresh(void)
 	int perfmode;
 
 	mutex_lock(&dytc_mutex);
-	if (dytc_profile_available == DYTC_FUNCMODE_MMC) {
+	if (dytc_capabilities & BIT(DYTC_FC_MMC)) {
 		if (dytc_mmc_get_available)
 			err = dytc_command(DYTC_CMD_MMC_GET, &output);
 		else
 			err = dytc_cql_command(DYTC_CMD_GET, &output);
-	} else if (dytc_profile_available == DYTC_FUNCMODE_PSC)
+	} else if (dytc_capabilities & BIT(DYTC_FC_PSC))
 		err = dytc_command(DYTC_CMD_GET, &output);
 
 	mutex_unlock(&dytc_mutex);
@@ -10517,7 +10511,6 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
 	set_bit(PLATFORM_PROFILE_BALANCED, dytc_profile.choices);
 	set_bit(PLATFORM_PROFILE_PERFORMANCE, dytc_profile.choices);
 
-	dytc_profile_available = DYTC_FUNCMODE_NONE;
 	err = dytc_command(DYTC_CMD_QUERY, &output);
 	if (err)
 		return err;
@@ -10530,13 +10523,12 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
 		return -ENODEV;
 
 	/* Check what capabilities are supported */
-	err = dytc_command(DYTC_CMD_FUNC_CAP, &output);
+	err = dytc_command(DYTC_CMD_FUNC_CAP, &dytc_capabilities);
 	if (err)
 		return err;
 
-	if (output & BIT(DYTC_FC_MMC)) { /* MMC MODE */
-		dytc_profile_available = DYTC_FUNCMODE_MMC;
-
+	if (dytc_capabilities & BIT(DYTC_FC_MMC)) { /* MMC MODE */
+		pr_debug("MMC is supported\n");
 		/*
 		 * Check if MMC_GET functionality available
 		 * Version > 6 and return success from MMC_GET command
@@ -10547,8 +10539,8 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
 			if (!err && ((output & DYTC_ERR_MASK) == DYTC_ERR_SUCCESS))
 				dytc_mmc_get_available = true;
 		}
-	} else if (output & BIT(DYTC_FC_PSC)) { /* PSC MODE */
-		dytc_profile_available = DYTC_FUNCMODE_PSC;
+	} else if (dytc_capabilities & BIT(DYTC_FC_PSC)) { /* PSC MODE */
+		pr_debug("PSC is supported\n");
 	} else {
 		dbg_printk(TPACPI_DBG_INIT, "No DYTC support available\n");
 		return -ENODEV;
@@ -10574,7 +10566,6 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
 
 static void dytc_profile_exit(void)
 {
-	dytc_profile_available = DYTC_FUNCMODE_NONE;
 	platform_profile_remove();
 }
 
-- 
2.36.1


             reply	other threads:[~2022-06-03 17:02 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-03 17:02 Mark Pearson [this message]
2022-06-03 17:02 ` [PATCH 2/4] platform/x86: thinkpad-acpi: Add support for automatic mode transitions Mark Pearson
2022-06-03 17:02 ` [PATCH 3/4] platform/x86: thinkpad-acpi: Add support for hotkey 0x131a Mark Pearson
2022-06-03 17:14   ` Limonciello, Mario
2022-06-03 17:21     ` [External] " Mark Pearson
2022-06-03 17:22       ` Limonciello, Mario
2022-06-03 17:02 ` [PATCH 4/4] platform/x86: thinkpad-acpi: Enable AMT by default on supported systems Mark Pearson
2022-06-22  9:51 ` [PATCH 1/4] platform/x86: thinkpad-acpi: profile capabilities as integer Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220603170212.164963-1-markpearson@lenovo.com \
    --to=markpearson@lenovo.com \
    --cc=hdegoede@redhat.com \
    --cc=mario.limonciello@amd.com \
    --cc=markgross@kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.