All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Matthew Wilcox (Oracle)" <willy@infradead.org>
To: Jan Kara <jack@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>,
	tytso@mit.edu, Andreas Dilger <adilger.kernel@dilger.ca>,
	linux-ext4@vger.kernel.org, linux-fsdevel@vger.kernel.org
Subject: [PATCH 1/3] quota: Prevent memory allocation recursion while holding dq_lock
Date: Sun,  5 Jun 2022 15:38:13 +0100	[thread overview]
Message-ID: <20220605143815.2330891-2-willy@infradead.org> (raw)
In-Reply-To: <20220605143815.2330891-1-willy@infradead.org>

As described in commit 02117b8ae9c0 ("f2fs: Set GF_NOFS in
read_cache_page_gfp while doing f2fs_quota_read"), we must not enter
filesystem reclaim while holding the dq_lock.  Prevent this more generally
by using memalloc_nofs_save() while holding the lock.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
---
 fs/quota/dquot.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index a74aef99bd3d..cdb22d6d7488 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -425,9 +425,11 @@ EXPORT_SYMBOL(mark_info_dirty);
 int dquot_acquire(struct dquot *dquot)
 {
 	int ret = 0, ret2 = 0;
+	unsigned int memalloc;
 	struct quota_info *dqopt = sb_dqopt(dquot->dq_sb);
 
 	mutex_lock(&dquot->dq_lock);
+	memalloc = memalloc_nofs_save();
 	if (!test_bit(DQ_READ_B, &dquot->dq_flags)) {
 		ret = dqopt->ops[dquot->dq_id.type]->read_dqblk(dquot);
 		if (ret < 0)
@@ -458,6 +460,7 @@ int dquot_acquire(struct dquot *dquot)
 	smp_mb__before_atomic();
 	set_bit(DQ_ACTIVE_B, &dquot->dq_flags);
 out_iolock:
+	memalloc_nofs_restore(memalloc);
 	mutex_unlock(&dquot->dq_lock);
 	return ret;
 }
@@ -469,9 +472,11 @@ EXPORT_SYMBOL(dquot_acquire);
 int dquot_commit(struct dquot *dquot)
 {
 	int ret = 0;
+	unsigned int memalloc;
 	struct quota_info *dqopt = sb_dqopt(dquot->dq_sb);
 
 	mutex_lock(&dquot->dq_lock);
+	memalloc = memalloc_nofs_save();
 	if (!clear_dquot_dirty(dquot))
 		goto out_lock;
 	/* Inactive dquot can be only if there was error during read/init
@@ -481,6 +486,7 @@ int dquot_commit(struct dquot *dquot)
 	else
 		ret = -EIO;
 out_lock:
+	memalloc_nofs_restore(memalloc);
 	mutex_unlock(&dquot->dq_lock);
 	return ret;
 }
@@ -492,9 +498,11 @@ EXPORT_SYMBOL(dquot_commit);
 int dquot_release(struct dquot *dquot)
 {
 	int ret = 0, ret2 = 0;
+	unsigned int memalloc;
 	struct quota_info *dqopt = sb_dqopt(dquot->dq_sb);
 
 	mutex_lock(&dquot->dq_lock);
+	memalloc = memalloc_nofs_save();
 	/* Check whether we are not racing with some other dqget() */
 	if (dquot_is_busy(dquot))
 		goto out_dqlock;
@@ -510,6 +518,7 @@ int dquot_release(struct dquot *dquot)
 	}
 	clear_bit(DQ_ACTIVE_B, &dquot->dq_flags);
 out_dqlock:
+	memalloc_nofs_restore(memalloc);
 	mutex_unlock(&dquot->dq_lock);
 	return ret;
 }
-- 
2.35.1


  reply	other threads:[~2022-06-05 14:38 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-05 14:38 [PATCH 0/3] Cache quota files in the page cache Matthew Wilcox (Oracle)
2022-06-05 14:38 ` Matthew Wilcox (Oracle) [this message]
2022-06-06  8:03   ` [PATCH 1/3] quota: Prevent memory allocation recursion while holding dq_lock Jan Kara
2022-06-06 12:42     ` Matthew Wilcox
2022-06-06 13:08       ` Jan Kara
2022-06-05 14:38 ` [PATCH 2/3] quota: Support using the page cache for quota files Matthew Wilcox (Oracle)
2022-06-06  2:53   ` kernel test robot
2022-06-06  4:05   ` kernel test robot
2022-06-06  4:36   ` kernel test robot
2022-06-05 14:38 ` [PATCH 3/3] ext4: Use generic_quota_read() Matthew Wilcox (Oracle)
2022-06-06  8:38   ` Jan Kara
2022-06-08  1:42     ` Matthew Wilcox
2022-06-08 14:21       ` Jan Kara
2022-06-13  7:59   ` [ext4] fa96490369: WARNING:at_fs/ext4/inode.c:#ext4_invalidate_folio kernel test robot
2022-06-13  7:59     ` kernel test robot
2022-06-13  7:59     ` [LTP] " kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220605143815.2330891-2-willy@infradead.org \
    --to=willy@infradead.org \
    --cc=adilger.kernel@dilger.ca \
    --cc=jack@suse.com \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=tytso@mit.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.